Graphic Products
Screen Print Materials
Engineered to Perform Better™
ORAFOL’s Headquarters
“
A dedication to quality is a source of pride for all of us at ORAFOL and it is a key factor in our continued growth and success. Dr. Holger Loclair Managing Director, ORAFOL Europe GmbH
Index Screen Printing Materials Find the right solution for your application needs The ORAFOL line of screen print products include ORACAL®, ORALITE® and ORALUX®. Our team of product application experts can assist you in selecting the perfect material for your application, taking into consideration variables such as application method, substrate type, duration and durability requirements.
Page
List of contents
5 ORACAL® 751
High Performance Cast Film
5 ORACAL® 651
Intermediate Calendered Film
5 ORACAL® 341
Promotional Calendered Film
6 ORACAL® 1640ht
High-Tack Print Vinyl
6 ORACAL 640
Print Vinyl
6 ORACAL® 620
Print Vinyl
7 ORACAL® 301F
Print Polyester
7 ORACAL 352
Print Polyester
7 ORAJET® 1740
Eco Print
8 ORALITE® 5700
Engineer Grade Premium
8 ORALITE® 5500
Engineer Grade
8 ORALITE 5650ra /5600
Fleet Engineer Grade with RapidAir® Technology
Fleet Engineer Grade
®
®
®
9 ORALITE® 5400
Commercial Grade
9 ORALITE 5300
Commercial Grade
9 ORALITE® V98
Conformable Graphic Sheeting
10 ORACAL® 7510/6510
Fluorescent Premium Cast
Fluorescent Cast
®
10 ORALUX 9300
Luminescent Cast
10 ORACAL® 820
Safety Vinyl
®
Standard sheet sizes 27" x 38" or 30" x 38". All products are available as rolls.
11
Notes on Processing and Handling
12-15
Product Overview – Printing Materials
“
ORAFOL products are sold in more than 100 countries worldwide.
Printing Materials · Marking Films
ORACAL® 751 High Performance Cast Designed for lettering, marking and decorative elements with the highest durability and conformability requirements. Thickness
Durability
Release Liner
Adhesive
Colors
Finish
2 mil
Up to 8 years
Silicone-coated paper, 84# Blue liner for white
Solvent Polyacrylate, Permanent
78 Colors + Transparent
Gloss
(010 and 070 available in gloss & matte)
ORACAL® 651 Intermediate Cal The industry standard in intermediate calendered film for medium-term indoor and outdoor lettering, marking and decoration. Special proprietary formulation ensures optimized stability and resistance to UV degradation. Thickness
Durability
Release Liner
Adhesive
Colors
Finish
2.5 mil
Up to 6 years
Silicone-coated paper, 84# Blue liner for white
Solvent Polyacrylate, Permanent
60 Colors + Transparent
Gloss
(010 and 070 available in gloss & matte)
ORACAL® 341 Promotional Cal Ideal for short-term lettering, markings and decorations. Thickness
Durability
Release Liner
Adhesive
Colors
Finish
3 mil
Up to 3 years
Silicone-coated paper, 84#
Polyacrylate dispersion, Permanent
21 Colors + Transparent
Gloss
Typical application examples for ORACAL® 751 and ORACAL® 651
Standard sheet sizes 27" x 38" or 30" x 38". All products are available as rolls.
ORACAL® 751
ORACAL® 651
Engineered to Perform Better™ www.orafolamericas.com
5
Printing Materials
ORACAL® 1640ht High Tack Print Vinyl Short- to medium-term outdoor applications such as markings, inscriptions and decorations. Indoor exposure is almost unlimited. High initial-tack adhesive is perfect for low-energy surfaces. Thickness
Durability
Release Liner
Adhesive
Colors
Finish
4 mil
3 years
Silicone-coated paper on one side, 90#
Polyacrylate, Permanent; High initial-tack
000 Transparent 010 White
Gloss Matte
ORACAL® 640 Print Vinyl Short- to medium-term outdoor applications such as markings, inscriptions and decorations. Indoor exposure is almost unlimited. Thickness
Durability
Release Liner
Adhesive
Colors
Finish
3 mil
3 years
Silicone-coated paper on one side, 90#
Polyacrylate, Permanent
000 Transparent 010 White
Gloss Matte
ORACAL® 620 Print Vinyl Short- to medium-term outdoor applications such as markings, inscriptions and decorations. Indoor exposure is almost unlimited. Thickness
Durability
Release Liner
Adhesive
Colors
Finish
3 mil
3 years
Silicone-coated paper on one side, 90#
Polyacrylate, Removable
000 Transparent 010 White
Gloss Matte
ORACAL® 1640ht
6
www.orafolamericas.com Engineered to Perform Better™
ORACAL® 640
Standard sheet sizes 27" x 38" or 30" x 38". All products are available as rolls.
Printing Materials
ORACAL® 301F Print Polyester Perfect indoor/outdoor metallized or white polyester film for short- to medium-term applications such as markings, inscriptions and decorations. Thickness
Durability
Release Liner
Adhesive
Colors
Finish
2 mil
2 years
Silicone-coated polyester film on one side, 4 mil
Polyacrylate, Permanent
010 White | 001 Chrome, 907 Brushed Chrome
Gloss
ORACAL® 352 Print Polyester For decorative labels, name and technical plates, decorative elements and moldings and safety decals. Thickness
Durability
Release Liner
Adhesive
Colors
Finish
1 mil
Up to 2 years
PE-coated Silicone paper, 98#
Solvent polyacrylate, 000 Transparent | 010 White Permanent 001 Chrome | 907 Brushed Chrome | 911 gold-coated | 002 Matte Chrome | 003 Gold Gloss
Gloss
ORACAL® 1740 Eco Print Polyolefin-based film for environmentally-conscious short- and medium-term outdoor advertising. Indoor exposure is almost unlimited. Special topcoat for improved printing. Thickness
Durability
Release Liner
Adhesive
Colors
Finish
3.5 mil
2 years
Silicone-coated paper on one side, 83#
Polyacrylate, permanent
000 Transparent 010 White
Gloss
Typical application examples for ORACAL® 1740 and ORACAL® 301F
ORACAL® 352
ORACAL® 1740
ORACAL® 301F
Engineered to Perform Better™ www.orafolamericas.com
7
Printing Materials · Reflective Materials
ORALITE® 5700 Engineer Grade Premium For the manufacture of traffic control, guidance, warning, information signs and reflective lettering, numbers and symbols. Intended for long-term outdoor use. Meets ASTM D 4956 specifications for Type I, Class 1 retroreflective sheeting. Thickness
Durability
Release Liner
Adhesive
Colors
5 mil
7 years
PE-coated paper, 89#
Solvent polyacrylate, permanent
8 Gloss Colors
ORALITE® 5500 Engineer Grade For the manufacture of traffic control, guidance, warning, information signs and reflective lettering, numbers and symbols. Intended for long-term outdoor use. Meets ASTM D 4956 specifications for Type I, Class 1 retroreflective sheeting. Thickness
Durability
Release Liner
Adhesive
Colors
4.25 mil
7 years
PE-coated paper, 89#
Solvent polyacrylate, permanent
8 Gloss Colors
ORALITE® 5650ra /5600 Fleet Engineer Grade with RapidAir® Technology/ Fleet Engineer Grade For vehicle graphic applications to produce reflective lettering, markings and decorations. Intended for applications over corrugations and rivets. Meets ASTM D 4956 specifications for Type I, Class 1 retroreflective sheeting. Thickness
Durability
Release Liner
Adhesive
Colors
5 mil
7 years
PE-coated paper, 89#
Solvent polyacrylate, permanent
5650ra- 11 Gloss Colors 5600- 14 Gloss Colors
ORALITE® 5700
8
www.orafolamericas.com Engineered to Perform Better™
ORALITE® 5500
Printing Materials · Reflective Materials
ORALITE® 5400 Commercial Grade For the manufacture of guidance, warning, information signs and reflective lettering, numbers and symbols. Meets ASTM D 4956 specifications for Type I, Class 1 retroreflective sheeting. Thickness
Durability
Release Liner
Adhesive
Colors
3.5 mil
4 years
PE-coated paper, 89#
Solvent polyacrylate, permanent
6 Gloss Colors
ORALITE® 5300 Commercial Grade For the manufacture of traffic control, guidance, warning, information signs and reflective lettering, numbers and symbols which when being used do not have to comply with any national specification for retroreflectivity. Thickness
Durability
Release Liner
Adhesive
Colors
3.5 mil
7 years
PE-coated paper, 89#
Solvent polyacrylate, permanent
6 Gloss Colors
ORALITE® V98 Conformable Graphic Sheeting Ideal for application on ambulances, police, fire and other EMS vehicles. Thickness
Durability
Release Liner
Adhesive
Colors
13-18 mil
5 years Colors 3 years Fluorescents
Polycoated paper, 76#
Solvent polyacrylate
15 White, 18 Yellow, 12 Red, 27 Green, 23 Blue, L1 Fl. Yellow, L2 Fl. Lime, L3 Fl. Orange
Typical application example for ORALITE® 5400
Standard sheet sizes 27" x 38" or 30" x 38". All products are available as rolls.
ORALITE® 5400
ORALITE® 5300
Engineered to Perform Better™ www.orafolamericas.com
9
Printing Materials · Specialty Films
ORACAL® 7510/6510 Fluorescent Premium Cast/Fluorescent Cast Designed for short-term graphics that require high-impact visibility such as vehicle and bus advertising, POP displays, labels, decals and retail applications. Thickness
Durability
Release Liner
Adhesive
Colors
7510- 6 mil 6510- 4-mil
7510– 2 years 1 year Pink & Orange 6510– 1 year 6 mo. Pink & Orange
Silicone-coated paper, 84#
Solvent polyacrylate, permanent
6 Gloss Colors
ORALUX® 9300 Luminescent Cast Great for indoor safety and emergency exit signage in buildings, cruise ships, and airplanes. Thickness
Durability
Release Liner
Adhesive
Colors
6 mil
5 years
PE-coated silicone paper, 90#
Solvent polyacrylate, permanent
Off White
(indoor only)
ORACAL® 820 Safety Vinyl Designed for tamper-evident applications. This film can only be removed in small pieces to prevent fraudulent handling of decals, labels and other markings. Thickness
Durability
Release Liner
Adhesive
Colors
2 mil
5 years
PE-coated paper, 91#
Solvent polyacrylate, permanent
White Gloss & Matte
ORALUX® 9300
10
www.orafolamericas.com Engineered to Perform Better™
ORACAL® 820
Standard sheet sizes 27" x 38" or 30" x 38". All products are available as rolls.
Notes on Processing and Handling 1. Preliminary remarks The following general tips are given for application of ORAFOL® Screen Print Products. For more information on printable media for vehicles, please visit www.orafolamericas.com. 2. Storage ORACAL® printing films should be stored in a cool dry place protected from sunlight. Material delivered in rolls must either be suspended or stand on-end with the provided roll end caps. ORAFOL® recommends storing sheet form products in their original packaging flat on a shelf or pallet. Prior to processing, the self-adhesive films should be acclimated to the humidity and temperature conditions of the processing area. Ideal humidity should be between 50% and 55% and temperatures between +68°F to +72°F. See table below for general guidelines to allow material to adjust properly to the processing humidity and temperature. Number of sheets per stack
Temperature difference between sheets and processing area ± 41°F
±50°F
±59°F
250
3 hours
6 hours
10 hours
1500
4 hours
9 hours
15 hours
3. Cutting It is important to use a clean, sharp knife when cutting ORAFOL® printing films. A clean knife prevents any buildup of adhesive residue which could be deposited on the edge of the sheet. The clamping balls should apply as little pressure as possible during cutting. 4. Printing Use only printing ink systems recommended by the ink manufacturer for the self-adhesive material being processed. During multicolor printing, always ensure that each layer of ink has thoroughly dried before the next is applied. There is a direct relationship between dimensional stability and register accuracy during printing. Tunnel drying alters the moisture content of the cover paper and the dimensional stability of the film itself may be affected. To ensure register accuracy in multicolor prints, we recommend passing the self-adhesive material once through the printing machine and the tunnel dryer prior to printing.
Wavey edges or plating of the self-adhesive material can always be traced to excessively dry or moist conditions within the processing areas. Constant ambient conditions should be maintained both day and night. A large reduction in temperature promotes wavey edges. If you wish to protect the print with a finishing coat of clear enamel, please be aware that solvents may cause brittleness of the material and that shrinkage may occur during drying causing the film edges to detach from the carrier paper or from the surface to which the film is applied. Compatibility should therefore be tested prior to printing. 5. Application ORAFOL® screen print products should be applied to clean and dry surfaces free of oil, grease, solvents, silicone or other contamination. To avoid potential issues thoroughly clean the substrate before application. Also, allow oven dried or baked paints to outgas for three weeks prior to application. To avoid undesirable temporary whitening in wet application on transparent surfaces, we recommend the use of printing films equipped with solvent polyacrylate adhesive. For more information on proper car application methods, please refer to our product support documents on our website www.orafolamericas.com. Caution! Certain high thermal insulation double glazing systems may be damaged by self-adhesive stickers due to stress caused by extreme temperature fluctuations. 6. Removability Please review individual product technical sheets for adhesive type and areas of use. This information is based on our knowledge and experience. Specialized or occupational knowledge and competence of a professional sign maker are presupposed. Due to the diversity of potential influencing factors during application and use, we recommend customers test our products first. No legally binding warranty of certain qualities can be derived from our information.
Engineered to Perform Better™ www.orafolamericas.com
11
Product Overview – Screen Printing Materials
Product
ORACAL® 751
Description
High Performance Cast Film
Front Material (without paper and adhesive)
Cast PVC film, 2 mil
Release Paper
84# silicone-coated paper
Adhesive
Colors
(FINAT-TM 14)
Solvent polyacrylate, permanent
78 Colors + Transparent (Gloss) 010 & 070 also
Adhered to steel, no shrinkage in cross direction; in length, <.006"
60 Colors + Transparent (Gloss) 010 & 070 also
Adhered to steel, no shrinkage in cross direction; in length, <.016"
available in matte
ORACAL® 651
Intermediate Calendered Film
Calendered PVC film, 2.5 mil
84# silicone-coated paper
Solvent polyacrylate, permanent
available in matte
12
ORACAL® 341
Promotional Calendered Film
Calendered PVC film, 3 mil
84# silicone-coated paper
ORACAL® 1640ht
Print Vinyl
Soft PVC film, 4 mil
ORACAL® 640
Print Vinyl
ORACAL® 620
Dimensional Stability
21 Colors + Transparent (Gloss)
Adhered to steel, no shrinkage in cross direction; in length, <.019"
90# Polyacrylate, silicone-coated permanent paper on one side
White and Transparent (Gloss/Matte)
Adhered to steel, no shrinkage in cross direction; in length, <.016"
Soft PVC film, 3 mil
90# Polyacrylate, silicone-coated permanent paper on one side
White and Transparent (Gloss/Matte)
Adhered to steel, no shrinkage in cross direction; in length, <.016"
Print Vinyl
Soft PVC film, 3 mil
90# Polyacrylate, silicone-coated removable paper on one side
White and Transparent (Gloss/Matte)
Adhered to steel, no shrinkage in cross direction; in length, <.016"
ORACAL® 301F
Print Polyester
Print polyester, 2 mil
4 mil Polyester film, silicone-coated on one side
Polyacrylate, permanent
Chrome, Brushed Chrome and White (Gloss)
Adhered to steel, no shrinkage in cross direction; in length, <.008"
ORACAL® 352
Print Polyester Film
Print polyester 1 mil
98# PE-coated paper on both sides
Solvent polyacrylate, permanent
White and Transparent (Gloss)
Adhered to steel, no shrinkage in cross direction; in length, <.004"
ORACAL® 1740
Eco Print
Polyolefin film 3.5 mil
83# Polyacrylate, silicone-coated permanent paper on one side
White and Transparent (Gloss)
Adhered to steel, no shrinkage in cross direction; in length, 0.016"
ORALITE® Engineer Grade 5700 Premium
Reflective film, 5 mil
89# PE-coated silicone paper
Solvent polyacrylate, permanent
8 colors (Gloss)
N/A
ORALITE® Engineer Grade 5500
Reflective film, 4.25 mil
89# PE-coated silicone paper
Solvent polyacrylate, permanent
8 colors (Gloss)
N/A
www.orafolamericas.com Engineered to Perform Better™
Polyacrylate dispersion, permanent
Temperature Resistance
Adhesive Power (FINAT-TM 1, after 24 hrs.)
Print Compatibility
Tensile Strength
Elongation at Break
(DIN EN ISO 527)
(DIN EN ISO 527)
along
across
along
across
Minimum Life Expectancy (Not printed)
Minimum Application Temperature
1
Adhered to aluminum, -58°F to +230°F, no variation
Adhered to stainless steel, 4.1 lb./in.
Thermal Transfer (gloss finish only)
Min. 19 MPa
Min. 19 MPa
Min. 120%
Min. 120%
Up to 8 years
46ºF
Adhered to aluminum, -40°F to +176°F, no variation
Adhered to stainless steel, 4.1 lb./in.
Thermal Transfer (gloss finish only)
Min. 19 MPa
Min. 19 MPa
Min. 130%
Min. 150%
Up to 6 years
46ºF
Adhered to aluminum, -40°F to +158°F, no variation
Adhered to stainless steel, 3.4 lb./in.
Thermal Transfer
Min. 17 MPa
Min. 17 MPa
Min. 120%
Min. 140%
Up to 3 years
50ºF
Adhered to aluminum, -40°F to +176°F, no variation
Adhered to stainless steel, 5.02 lb./in.
Screen Printing Flexo and UV-offset printing (special inks
Min. 19 MPa
Min. 19 MPa
Min. 130%
Min. 150%
3 years
50ºF
Adhered to aluminum, -40°F to +176°F, no variation
Adhered to stainless steel, 3.65 lb./in.
Screen Printing
Min. 19 MPa
Min. 19 MPa
Min. 130%
Min. 150%
3 years
Adhered to aluminum, -40°F to +176°F, no variation
Adhered to stainless steel, 1.37 lb./in.
Screen Printing
Min. 19 MPa
Min. 19 MPa
Min. 130%
Min. 150%
3 years
N/A
Adhered to stainless steel, 5.7 lb./in.
Screen Printing UV-offset printing
Min. 200 MPa
Min. 260 MPa
Min. 125%
Min. 80%
2 years
> 46ºF
Adhered to aluminum, -40°F to +248°F, no variation
Adhered to stainless steel, 2.7 lb./in.
Screen Printing UV-Offset printing
Min. 200 MPa
Min. 260 MPa
Min. 125%
Min. 80%
2 years
46ºF
Adhered to aluminum, -40°F to +158°F, no variation
Adhered to stainless steel, 2.74 lb./in.
Screen Printing UV-Offset printing
Min. 38 MPa
Min. 38 MPa
Min. 130%
Min. 150%
2 years
> 50ºF
Min. 110%
Min. 120%
Adhered to aluminum, -68°F to +179°F, no variation
Adhered to stainless steel, 3.43 lb./in. film tear
Screen Printing
N/A
N/A
N/A
N/A
7 years
> +50ºF
Adhered to aluminum, -68°F to +179°F, no variation
Adhered to stainless steel, 3.42 lb./in. film tear
Screen Printing (ORALITE® 5018 is recommended)
N/A
N/A
N/A
N/A
7 years
> +50ºF
(dry application)
required)
32ºF (dry application)
32ºF (dry application)
Engineered to Perform Better™ www.orafolamericas.com
13
Product Overview – Screen Printing Materials
Product
Description
Front Material (without paper and adhesive)
Release Paper
Adhesive
Colors
(FINAT-TM 14)
ORALITE® Fleet Engineer 5650ra Grade with RapidAir® Technology
PVC reflective film, 4.25-5.5 mil
89# PE-coated silicone paper
Solvent polyacrylate, permanent
11 colors (Gloss)
N/A
ORALITE® Fleet Engineer 5600 Grade
PVC reflective film, 5 mil
89# PE-coated silicone paper
Solvent polyacrylate, permanent
14 colors (Gloss)
N/A
ORALITE® Commercial Grade Reflective film, 5400 3.5 mil
89# PE-coated paper
Solvent polyacrylate, permanent
6 colors
N/A
ORALITE® Commercial Grade Reflective film, 5300 3.5 mil
89# PE-coated silicone paper
Solvent polyacrylate, permanent
6 colors
N/A
ORALITE® Conformable V98 Graphic Sheeting
13-18 mil
76# Polycoated paper
Solvent polyacrylate,
8 colors
Adhered to steel, no shrinkage in cross direction; in length, <.063"
ORACAL® 7510
Fluorescent Premium Cast
Cast PVC film, 6 mil
84# Silicone-coated paper
Solvent polyacrylate, permanent
6 colors (Gloss)
Adhered to steel, no shrinkage in cross direction; in length, <.012"
ORACAL® 6510
Fluorescent Cast
Cast PVC film, 4 mil
84# Silicone-coated paper
Solvent polyacrylate, permanent
6 colors (Gloss)
Adhered to steel, no shrinkage in cross direction; in length, <.012"
ORALUX® 9300
Luminescent Cast Film
Special PVC film, 6 mil
90# PE-coated silicone paper
Solvent polyacrylate, permanent
Off white (Gloss)
Adhered to steel, no shrinkage in cross direction; in length, <.01"
ORACAL® 820
Safety Vinyl
Cast PVC film, 2 mil
91# PE-coated silicone paper
Solvent polyacrylate, permanent
White (Gloss/Matte)
No measurable shrinkage in cross direction, in length max. 0.007"
Standard sheet sizes are 27" x 38" or 30" x 38". Special sheet sizes available upon request. All products are available as rolls. 100 sheets/box (unless noted otherwise). 25 boxes/pallet (unless noted otherwise).
1
14
Dimensional Stability
With vertical external weathering (ORAFOL Americas climate zone 1)
www.orafolamericas.com Engineered to Perform Better™
Temperature Resistance
Adhesive Power (FINAT-TM 1, after 24 hrs.)
Print Compatibility
Tensile Strength
Elongation at Break
(DIN EN ISO 527)
(DIN EN ISO 527)
along
along
across
Minimum Life Expectancy (Unprinted)
Minimum Application Temperature
1
across
Adhered to aluminum, -58°F to +203°F, no variation
Adhered to stainless steel, 3.8 lb./in. Adhered to acrylic coating, 3.9 lb./in.
Latex, Solvent, EcoSolvent, UV Curable and Screen Printing
Min. 10 MPa
Min. 10 MPa
Min. 100%
Min. 100%
7 years
59ºF
Adhered to aluminum, -58°F to +203°F, no variation
Adhered to stainless steel, 3.43 lb./in. film tear
Latex, Solvent, EcoSolvent, UV Curable and Screen Printing
Min. 10 MPa
Min. 10 MPa
Min. 100%
Min. 100%
7 years
> +59ºF
Adhered to aluminum, -58°F to +180°F, no variation
Adhered to stainless steel, 3.42 lb./in. film tear
Latex, Solvent, EcoSolvent, UV Curable and Screen Printing
N/A
N/A
N/A
N/A
4 years
50ºF
Adhered to aluminum, -58°F to +180°F, no variation
Adhered to stainless steel, 3.42 lb./in. film tear
Screen printing
N/A
N/A
N/A
N/A
7 years
50ºF
Adhered to aluminum, -40°F to +221°F, no variation
4.0 lb./in.
Latex, Solvent, EcoSolvent, UV Curable and Screen Printing
N/A
N/A
N/A
N/A
5 years Colors 3 years Fluorescents
50ºF
Adhered to aluminum, -40°F to +230°F, no variation
Adhered to stainless steel, 4.1 lb./in.
Screen printing
Min. 15 MPa
Min. 15 MPa
Min. 120%
Min. 120%
2 years 1 year- Pink & Orange
46ºF
Adhered to aluminum, -40°F to +221°F, no variation
Adhered to stainless steel, 3.5 lb./in.
Screen printing
Min. 13 MPa
Min. 13 MPa
Min. 100%
Min. 100%
1 year 6 months- Pink & Orange
46ºF
Adhered to aluminum, -40°F to +212°F, no variation
Adhered to stainless steel, 4.1 lb./in.
Screen printing
Min. 12 MPa
Min. 10 MPa
Min. 100%
Min. 100%
5 years
46ºF
Screen printing. Also suitable for inkjet printing with solventbased, UV or latex inks.
Min. 14 MPa
Min. 14 MPa
Min. 4%
Min. 4%
5 years
> +50°F
-40°F to +194°F, no variation
N/A
The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of information, is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications, customers should independently determine the suitability of this material for their specific purpose, prior to use.
Engineered to Perform Better™ www.orafolamericas.com
15
Graphic Products Engineered to Perform Better™
Revised 09/15 | © 2015 ORAFOL Americas Inc. GP-SCREEN PRINT BROC 48720-SP
ORAFOL Americas - GA 1100 Oracal Parkway Black Creek, GA 31308
ORAFOL Americas - CT 120 Darling Drive Avon, CT 06001
ORAFOL Canada 2831 Bristol Circle Oakville, Ontario L6H 6X5
912-851-5000 • Fax | 912-851-5110 Toll Free | 888-672-2251
905-829-2828 • Fax | 905-829-9941 Toll Free | 888-727-3374
905-829-2828 • Fax | 905-829-9941 Toll Free | 888-727-3374
graphics-americas@orafol.com • www.orafolamericas.com