E160 Series HYUNDAI WIA CNC Turning Center
Technical Leader The CNC Turning Center E160 Series, designed by Hyundai WIA with years of expertise and the latest technology, maximizes productivity by enhancing both technical performance and economic efficiency.
MODEL E160A
Chuck Size 6″
E160LMC
Standard
Turret Long
Turn Mill
10 Station
● ●
●
● ●
12 Station
●
●
● ●
●
E160LC E160LMA
8″
●
E160C E160LA
Bed
●
●
●
●
●
●
●
●
●
High Speed, Rigidity and Productivity Economical CNC Turning center for next generation.
E160 Series ● 45° slanted one-piece bed structure with high rigidity
● Stabilized unit structure to minimize thermal displacement ● Impressive rapid traverse rate: 30m/min (1,181ipm) ● The most reliable high speed servo turret : 0.1sec/step ● Environmental friendly design ● Compact design suitable for installation in restricted space ● Ergonomic design for convenient access to chuck and tool
E160MA
E160LMA
01 E160 Series
Basic Features The Best Productivity 6 inch / 8 inch Compact CNC Turning Center
01
High Precision, High Rigidity One-piece Structure The E160 Series is designed with a 45 degree slanted bed combined with square type and tube type rib structure. This special design enhances rigidity and vibration absorbing capability, allowing powerful cutting with high precision.
LM Guideway
02
LM guideway with the rapid traverse rate of 30 m/min (1,181ipm) is installed on E160 Series. LM guideway maintains high precision even after a long periods of operation. LM guideway`s wide surface minimizes attrition and slipping which can occur often during machining.
Main Spindle Heat produced by the main spindle is blocked by applying a symmetric one-piece base and an insulation plate. This enables maintenance of high accuracy even during a long period of machining.
Turret By installing a servo turret, fast indexing is possible (0.1sec/1step) and productivity is improved by reducing cycle time
Ball Screw In order to eliminate thermal growth and increase accuracy, all axis are driven by high precision double anchored ballscrews.
03
04
HYUNDAI WIA MACHINE TOOL
Basic Features
04
CnC Turning Center
02
01
E160 SERIES
03
04 + 05
Reduction of non-cutting time ◉ Rapid Traverse Rate (X/Z-axis) : 30/30 m/min (1,181/1,181 ipm) ◉ Slideway : LM GUIDE ◉ Travel (X/Z-axis) E160A | E160C : 165/330 mm (6.5″/13″) E160LA | E160LC : 165/530 mm (6.5″/20.9″) E160LMA | E160LMC : 165/460 mm (6.5″/18.1″)
Power(kW[HP])
11 [14.7]
E160A/LA
Torque(N∙m[lbf∙ft])
70N∙m [51.6lbf∙ft] (15min) 11kW [14.7HP] (15min)
02 7.5 [10]
Power(kW[HP]) 70 [51.6]
7.5kW [10HP] (Cont)
15 [20.1] 11 [14.7]
35.8N.m [26.4lbf∙ft] (Cont.)
E160LMA
Torque(N∙m[lbf∙ft])
15kW [20.1HP] (15min) 95.5N∙m [70.4lbf∙ft] (15min) 11kW [14.7HP] (60min, Cont.)
95.6 [70.4]
70N∙m [51.6lbf∙ft] (60min)
70 [51.6]
High Precision Spindle 35.8 [26.4]
52.5N∙m [38.7lbf∙ft] (Cont.)
52.5 [38.7]
Long Lasting High Accuracy & Excellent Performance Turning Center SpindleCNC Speed (r/min) Spindle Speed (r/min)
0
1,500 2,000
E160 Series
4,500
6,000
0
Main Spindle
1,500 2,000
Power(kW[HP])
6,000
3,000
E160LMC
Torque(N∙m[lbf∙ft])
15kW [20.1HP] (15min) The E160 Series spindle was designed with a precise and highly 15 [20.1] . rigid spindle structure by adopting a high speed angular ball171.8N m [126.7lbf∙ft] (15min) bearing in the DB array. 11kW [14.7HP] (Cont) 11 To ensure good safety in the powerful and heavy cutting,[14.7] the spindle is designed with an angular bearing structure with P4 class. 126N.m [92.9lbf∙ft] (60min)
171.8 [126.7]
0.001°
94.5N.m [69.7lbf∙ft] (Cont.)
94.5 [69.7]
C-Axis Control When milling, drilling and tappiing with live tools(VDI turret), spindle control up to 0.001 degree is possible. This allows processing 0of various types of products. Power(kW[HP])
E160C/LC
833 1,111
E160C/LC
Tail Power(kW[HP]) Stock 171.8N.m [126.7lbf∙ft] (30min)
Torque(N∙m[lbf∙ft])
4,000
1,944
Spindle Speed (r/min)
Torque(N∙m[lbf∙ft]) 171.8
15kW [20.1HP] [126.7] tailstock. Stable machining is possible with the(30min) 80mm(3.1″) movable 11 [14.7] 7.5 [10]
15 [20.1]
11kW [14.7HP] (15min) 126N.m [92.9lbf∙ft] (15min)
126 [92.9]
7.5kW [10HP] (Cont) 64.4N.m [47.5lbf∙ft] (Cont.)
0
64.4 [47.5]
833 1,111
2,500
Spindle Speed (r/min)
11kW [14.7HP] (Cont.) (Long126N Bed : Standard) .m [92.9lbf∙ft] (Cont.) 11 [14.7]
Taper : MT
126 [92.9]
#4 Travel : 80 mm (3.1″) Diameter : Ø55 (2.2″)
0
4,000 1,111 1,945 SIEMENS 1PH8 Servo 833 Motor Spindle Speed (r/min)
4,000
The 1PH8 Series is a high quality performance motor providing concentricity of 10㎛ and fast response time.
Power(kW[HP])
10.8 [14.5]
Torque(N∙m[lbf∙ft])
Power(kW[HP])
10.8kW [14.5HP] (15min) 75.6N.m [55.8lbf∙ft] (15min) 68.7N.m [50.7lbf∙ft] (Cont.)
9 [12]
0
E160A/LA
75.6 [55.8] 68.7 [50.7]
9kW [12HP] (Cont)
500
1,500
4,500
Spindle Speed (r/min)
6,000
10.8 [14.5] 9 [12]
0
E160C/LC
Torque(N∙m[lbf∙ft])
136N.m [100.3lbf∙ft] 10.8kW [14.5HP] (15min) (15min) 113.4N.m [83.6lbf∙ft] 9kW [12HP] (Cont) (Cont.)
278
833
2,500
Spindle Speed (r/min)
136 [100.3] 113.4 [83.6]
4,000
HYUNDAI WIA MACHINE TOOL
Spindle
FANUC Spindle Motor
7.5 [10]
0
Torque(N∙m[lbf∙ft])
70N∙m [51.6lbf∙ft] (15min) 11kW [14.7HP] (15min)
Power(kW[HP]) 70 [51.6]
7.5kW [10HP] (Cont)
15 [20.1] 11 [14.7]
35.8N.m [26.4lbf∙ft] (Cont.)
35.8 [26.4]
1,500 2,000
4,500
6,000
E160LMA
Torque(N∙m[lbf∙ft])
15kW [20.1HP] (15min) 95.5N∙m [70.4lbf∙ft] (15min) 11kW [14.7HP] (60min, Cont.)
95.6 [70.4]
70N∙m [51.6lbf∙ft] (60min)
70 [51.6]
52.5N∙m [38.7lbf∙ft] (Cont.)
0
1,500 2,000
Spindle Speed (r/min)
52.5 [38.7]
6,000
3,000
Spindle Speed (r/min)
Power(kW[HP]) 15 [20.1]
11 [14.7]
E160LMC
0
06 + 07
Torque(N∙m[lbf∙ft])
15kW [20.1HP] (15min) 171.8N.m [126.7lbf∙ft] (15min)
171.8 [126.7]
11kW [14.7HP] (Cont) 126N.m [92.9lbf∙ft] (60min) 94.5N.m [69.7lbf∙ft] (Cont.)
833 1,111
94.5 [69.7]
4,000
1,944
Spindle Speed (r/min)
Power(kW[HP])
11 [14.7] 7.5 [10]
0
E160C/LC
E160C/LC
Torque(N∙m[lbf∙ft])
15 [20.1]
11kW [14.7HP] (15min) 126N.m [92.9lbf∙ft] (15min)
126 [92.9]
7.5kW [10HP] (Cont) 64.4N.m [47.5lbf∙ft] (Cont.)
11 [14.7]
Torque(N∙m[lbf∙ft]) Power(kW[HP]) 171.8N.m [126.7lbf∙ft] (30min) 15kW [20.1HP] (30min) 11kW [14.7HP] (Cont.) 126N.m [92.9lbf∙ft] (Cont.)
2,500
4,000
0
833 1,111
Spindle Speed (r/min)
Power(kW[HP])
171.8 [126.7]
126 [92.9]
64.4 [47.5]
833 1,111
E160A/LA
CNC Turning Center
11 [14.7]
E160A/LA
E160 SERIES
Power(kW[HP])
Torque(N∙m[lbf∙ft])
1,945
4,000
Spindle Speed (r/min)
Power(kW[HP])
E160C/LC
Torque(N∙m[lbf∙ft])
03 E160 Series
Servo Turret High speed, High Accuracy, Highly Reliable Servo Turret
Turret Continued accuracy of the turret indexing position is maintained by a powerful, high speed servo motor. The 3 piece coupling and non-lift method applied design prevents foreign material from getting into the turret.
HYUNDAI WIA MACHINE TOOL
Turret
Mill Turret (VDI) By adopting 3-piece coupling, it ensures powerful clamping and turret indexing and tool rotation is done by a single motor.
E160A | LA
◉ Tool Size (O.D/I.D)
□20/Ø32 (□0.8″/Ø1.2″) ◉ Indexing Time : 0.1 sec/step
E160C | LC
◉ Number of Tools : 10 EA ◉ Tool Size (O.D/I.D)
□25 / Ø32 (□1″/Ø1.2″) ◉ Indexing Time : 0.1 sec/step
Mill Tool Holder Straight Milling Head and Angular Milling Head live tools can be utilized to cut sides and inner diameters of workpieces.
E160LMA | LMC
Also, Drill, Tap, Endmill and many more tools can be utilized to enhance productivity and efficiency.
Straight Milling Head
(Mill Turret)
Angular Milling Head ◉ Output (Max./Cont.) :
8.8 / 3 kW (11.8 / 4 HP)
◉ Speed (rpm) : 4,500 r/min ◉ Collet Size : ◉ Type :
Ø16 (Ø0.6″) (ER25)
VDI 30
E160 SERIES
◉ Number of Tools : 12 EA
CnC Turning Center
VDI method makes tool change easier and especially reduces tool change time so that it offers a great convenience.
08 + 09
04 E160 Series
Machining Capability Excellent Performance, High Accuracy Cutting CNC Turning Center
E160LMA
Sample Workpieces
HYUNDAI WIA MACHINE TOOL
Machining
O.D Cutting 〈Material〈JIS〉:S45C(Carbon steel〉
CnC Turning Center
Ø41 (Ø1.6″) 4 mm (0.16″) 150 m/min (5,906 ipm) 1,165 r/min 0.3 mm/rev. (0.01″/rev.) 180 cc/min
E160 SERIES
Processing diameter Side cutting depth Cutting speed Spindle rpm Forwarding speed Chip discharge
Tapping 〈Material〈JIS〉:S45C(Carbon steel〉
Processing depth Tap spec / pitch Cutting speed Tool rotation Forwarding speed
15 mm (0.59″) M10/1.5 6 m/min (236.2″) 200 r/min 1.5 mm/rev (Ø0.06″)
10 + 11
End Mill 〈Material〈JIS〉:S45C(Carbon steel〉
Processing depth Tool Bore Cutting speed Tool rotation Forwarding speed Chip discharging amount
8 mm (0.31″) Ø16 (0.63″) 35 m/min (1,378″) 700 r/min 0.05 mm/rev (0.0019″) 18 cc/min
❖ The above results might be different by types of processing circumstances.
Machining Variation
O.D Cutting
Drilling
I.D Cutting
I.D Threading
Face Cutting
End Milling
O.D Hole Drilling
Ball-End Milling
05 E160 Series
Smart System Software for Smart Operating and Machining
HW-TM
HYUNDAI WIA Smart System
Monitor chine ing
Ma
Eas y
Us
HW-ESS
User Friendly
for CNC Turning Center
gy Saving Ener
HW-MMS
ent Machini ellig ng Int
er
Convenien ce
HW-eDNC HW-MCG
g Programmin
HWDPRO T/TM
Smart Factory
HW-MMS (HYUNDAI WIA-Machine Monitoring System)
A brand new manufacturing machine by HYUNDAI WIA, HW-MMS is a unique software capable of monitoring the operation status of manufacturing machines in factories, a smart solution to improve manufacturing conditions of customers. 01
02
03
04
05
HW-MMS
Remote System
01
Real-time monitoring of machine operation status (Cloud)
02
History and statistics of machine operation (Cloud)
03
History and statistics of alarm occurrence (Cloud)
04
History and statistics of work count (Cloud)
05
Remote diagnosis (Remote)
HYUNDAI WIA MACHINE TOOL
HYUNDAI WIA Smart System
HW-MCG
HYUNDAI WIA ethernet Direct Numerical Control
HYUNDAI WIA Machine Guidance
This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.
Software that offers operation, maintenance, management monitoring and various user friendly features. 12 + 13
HW-TM
HW-ESS (Standard)
HYUNDAI WIA Tool Monitoring
HYUNDAI WIA Energy Saving System
A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.
HW-DPRO T/TM
E160 SERIES
HW-eDNC
CNC Turning Center
Faster processing and enhanced accuracy in are possible through the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.
An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.
HYUNDAI WIA Dialogue PROgram Turn/TurnMill
Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)
USB Port Convenience is increased when inputting and outputting program. The USB port is available in addition to the former input output methods such as CF memort card and LAN.
06
HYUNDAI-iTROL The Powerful CNC platform for Machine Tools
E160 Series
HYUNDAI Intelligent Control Convenient and Easy-to-Use Machine Tool... Hyundai WIA take operator convenience to a higher level with the new controller, HYUNDAI-iTROL. Experience the new operating environment with HYUNDAI-iTROL.
iTROL Convenient Function Smart System operation preperation
When power is on, HYUNDAI-iTROL gives the worker instructions to do warm-up. HYUNDAI-iTROL also informs the worker of machine problems beforehand by showing current machine status.
iTROL Technology COMMUNICATION FUNCTION RJ 45 Ethernet USB 2.0 Compact Flash Card
Quick & Easy Machining Support
The three essential operations for machining are program check, tool measurement and coordinates system setup. HYUNDAI-iTROL provides three operations in consecutive order to prevent error and to enable quick and easy setup.
Easy input/output of programs is possible with the use of USB memory card, CF memory card and LAN.
Tool & Spindle Monitoring
Tool and spindle monitoring can be easily done with a simple operation. This helps with tool management, spindle protection and factory automation.
You can use energy saving function (ECO) and machining optimization function (SMART) with the MCP button.
E160 SERIES
Dynamic servo control, highly efficient Siemens servo drive and Siemens servo motor with durability and quick response have been applied.
CnC Turning Center
HYUNDAI WIA MACHINE TOOL
Controller
14 + 15
07
User Convenience Various Devices for User Convenience
E160 Series
Bar Feeder System Bar Feeder Bar feeder system enables automation which leads to efficiency improvement. Long Type
3 m (118.1″)
Max Bar Capacity
Ø42 mm (1.7″)
Short Type
1.5 m (59.1″)
Max Bar Capacity
Ø65 mm (2.6″)
Parts Conveyor The parts conveyor transfers the finished workpiece unloaded by the parts catcher for user convenience.
Bar Feeder Process
Round Bar Material
Bar Feeder
Machining
Parts Catcher
Parts Conveyor
HYUNDAI WIA MACHINE TOOL
Optional
E160 SERIES
CnC Turning Center
Gantry Loader System
16 + 17
Gantry Loader Machining Process The high speed gantry loaders and the work stocker allow the implementation of automation cells. This enables machining process flexibility and productivity enhancement.
Raw Material
In Work Stocker
1st Machining
Turn Over
End Product
Out Work Stocker
2nd Machining
Specifications Standard & Optional Spindle
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable E160A
E160C
Safety Device
E160A
Main Spindle Hollow Chuck 3 Jaw
6″
●
-
Total Splash Guard
8″
○
●
Chuck hydraulic pressure maintenance interlock
Main Spindle Solid Chuck 3 Jaw
6″
○
-
Electric Device
8″
-
○
Call Light
Standard Soft Jaw (1set)
●
●
Call Light
Chuck Clamp Foot Switch
●
●
2 Steps Hyd, Pressure Device
○
Spindle Inside Stopper
E160C
●
●
○(CE:●)
○(CE:●)
1 Color : ■
●
●
2 Color : ■■
○
○
Call Light
3 Color : ■■■
○
○
○
Call Light & Buzzer
3 Color : ■■■B
○
○
☆
☆
Electric Cabinet Light
○
○
5° Index
☆
☆
Remote MPG
-
-
C-Axis (0.001°)
-
-
Work Counter
Digital
○
○
○(CE:●)
○(CE:●)
Total Counter
Digital
○
○
☆
☆
Tool Counter
Digital
○
○
Multi Tool Counter
Digital
○
○
Chuck Open/Close Confirmation Device 2 Steps Chuck Foot Switch Turret Tool Holder
●
●
Electric Circuit Breaker
○
○
☆
☆
○
○
○
○
Mill Turret
VDI
-
-
AVR (Auto Voltage Regulator)
Straight Milling Head (Axial)
Collet Type,1ea
-
-
Transformer
Angular Milling Head (Radial) Collet Type,1ea
-
-
Auto Power Off
Straight Milling Head (Axial)
-
-
Measurement
Adapter Type
20kVA
Angular Milling Head (Radial) Adapter Type
-
-
Q-Setter
○
○
Boring Sleeve
●
●
Automatic Q-Setter
○
○
Drill Socket
●
●
○
○
U-Drill Holder
○
○
Work Close Confirmation Device TACO (Only for Special Chuck) SMC
○
○
U-Drill Holder Sleeve
○
○
Work Setter
☆
☆
☆
☆
X axis
-
-
-
-
Z axis
-
-
☆
☆
O.D Extension Holder
For Outside Diameter
Swivel Head Tail Stock & Steady Rest
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)
Quill Type Tail Stock
○
○
Environment
Programmable Tail Stock
-
-
Air Conditioner
○
○
Manual Type Hyd. Steady Rest
-
-
Oil Mist Collector
○
○
Standard Live Center (Tail Stock : Standard)
○
○
Oil Skimmer (Only for Chip Conveyor)
○
○
High Precesion Live Center
☆
☆
MQL (Minimal Quantity Lubrication)
☆
☆
2 Steps Tail Stock Pressure System
☆
☆
Fixture & Automation
Quill Forward/Reverse Confirmation Device
○
○
Auto Door
○
○
Tail Stock Foot Switch
☆
☆
Auto Shutter (Only for Automatic System)
☆
☆
Sub Operation Pannel
☆
☆
Coolant & Air Blow Standard Coolant (Nozzle)
●
●
Bar Feeder Interface
○
○
Chuck Coolant (Upper Chuck)
○
○
Bar Feeder (FEDEK)
☆
☆
Gun Coolant
○
○
Extra M-Code 4ea
○
○
Through Spindle Coolant (Only for Special Chuck)
☆
☆
Automation Interface
☆
☆
Thru Coolant for Live Tool
-
-
16 Contact
○
○
Chuck Air Blow (Upper Chuck)
○
○
32 Contact
○
○
Tail Stock Air Blow (Upper Tail Stock)
☆
☆
Parts Catcher
Main SP.
○
○
Turret Air Blow
☆
☆
Turret Work Pusher (For Automation)
☆
☆
Air Gun
○
○
Parts Conveyor
☆
☆
Through Spindle Air Blow (Only for Special Chuck)
☆
☆
Semi Automation System
☆
☆
0.4Bar (5.8 psi)
●
●
Hyd. Device
6Bar (87 psi)
Standard Hyd. Cylinder
Hollow
●
●
Standard Hyd. Unit
35bar (507.6 psi)/ 15ℓ (4 gal)
●
●
High Pressure Coolant
I/O Extension (IN & OUT)
○
○
Power Coolant System (For Automation)
☆
☆
Coolant Chiller
☆
☆
130ℓ(34.3 gal)
●
●
Machine Guidance (HW-MCG)
☆
☆
150ℓ(39.6 gal)
○
○
Energy Saving System (HW-ESS)
●
●
Rear (Rear)
○
○
Tool Monitoring (HW-TM)
○
○
Front (Right)
-
-
DNC software (HW-eDNC)
○
○
Rear (Right)
○
○
Machine Monitoring System (HW-MMS)
☆
☆
Conversational Program (HW-DPRO)
☆
☆
●
●
☆
☆
☆
☆
Chip Disposal Coolant Tank Chip Conveyor (Hinge/Scraper)
S/W
Special Chip Conveyor (Drum Filter)
Chip Wagon
☆
☆
Standard (180ℓ[47.5 gal])
○
○
Swing (200ℓ[52.8 gal])
○
○
Large Swing (290ℓ[76.6 gal])
○
○
Large Size (330ℓ[87.2 gal])
○
○
Customized
☆
☆
Specifications are subject to change without notice for improvement.
ETC Tool Box Customized Color CAD & CAM
Need Munsel No.
Specifications Standard & Optional
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable Safety Device
E160LA
Main Spindle Hollow Chuck 3 Jaw
6″
●
-
Total Splash Guard
8″
○
●
Chuck hydraulic pressure maintenance interlock
Main Spindle Solid Chuck 3 Jaw
6″
○
-
Electric Device
8″
-
○
Call Light
Standard Soft Jaw (1set)
●
●
Call Light
Chuck Clamp Foot Switch
●
●
2 Steps Hyd, Pressure Device
○
Spindle Inside Stopper
E160LC
●
●
○(CE:●)
○(CE:●)
1 Color : ■
●
●
2 Color : ■■
○
○
Call Light
3 Color : ■■■
○
○
○
Call Light & Buzzer
3 Color : ■■■B
○
○
☆
☆
Electric Cabinet Light
○
○
5° Index
☆
☆
Remote MPG
-
-
C-Axis (0.001°)
-
-
Work Counter
Digital
○
○
○(CE:●)
○(CE:●)
Total Counter
Digital
○
○
☆
☆
Tool Counter
Digital
○
○
Multi Tool Counter
Digital
○
○
Chuck Open/Close Confirmation Device 2 Steps Chuck Foot Switch Turret Tool Holder
●
●
Electric Circuit Breaker
○
○
☆
☆
○
○
○
○
Mill Turret
VDI
-
-
AVR (Auto Voltage Regulator)
Straight Milling Head (Axial)
Collet Type,1ea
-
-
Transformer
Angular Milling Head (Radial) Collet Type,1ea
-
-
Auto Power Off
Straight Milling Head (Axial)
-
-
Measurement
Adapter Type
20kVA
Angular Milling Head (Radial) Adapter Type
-
-
Q-Setter
○
○
Boring Sleeve
●
●
Automatic Q-Setter
○
○
Drill Socket
●
●
○
○
U-Drill Holder
○
○
Work Close Confirmation Device TACO (Only for Special Chuck) SMC
○
○
U-Drill Holder Sleeve
○
○
Work Setter
☆
☆
☆
☆
X axis
-
-
-
-
Z axis
-
-
☆
☆
O.D Extension Holder
For Outside Diameter
Swivel Head Tail Stock & Steady Rest
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)
Quill Type Tail Stock
●
●
Environment
Programmable Tail Stock
-
-
Air Conditioner
○
○
Manual Type Hyd. Steady Rest
-
-
Oil Mist Collector
○
○
Standard Live Center
●
●
Oil Skimmer (Only for Chip Conveyor)
○
○
High Precesion Live Center
☆
☆
MQL (Minimal Quantity Lubrication)
☆
☆
2 Steps Tail Stock Pressure System
☆
☆
Fixture & Automation
Quill Forward/Reverse Confirmation Device
○
○
Auto Door
○
○
Tail Stock Foot Switch
☆
☆
Auto Shutter (Only for Automatic System)
☆
☆
Sub Operation Pannel
☆
☆
Coolant & Air Blow Standard Coolant (Nozzle)
●
●
Bar Feeder Interface
○
○
Chuck Coolant (Upper Chuck)
○
○
Bar Feeder (FEDEK)
☆
☆
Gun Coolant
○
○
Extra M-Code 4ea
○
○
Through Spindle Coolant (Only for Special Chuck)
☆
☆
Automation Interface
☆
☆
Thru Coolant for Live Tool
-
-
16 Contact
○
○
Chuck Air Blow (Upper Chuck)
○
○
32 Contact
○
○
Tail Stock Air Blow (Upper Tail Stock)
☆
☆
Parts Catcher
Main SP.
○
○
Turret Air Blow
☆
☆
Turret Work Pusher (For Automation)
☆
☆
Air Gun
○
○
Parts Conveyor
☆
☆
Through Spindle Air Blow (Only for Special Chuck)
☆
☆
Semi Automation System
☆
☆
0.4Bar (5.8 psi)
●
●
Hyd. Device
6Bar (87 psi)
Standard Hyd. Cylinder
Hollow
●
●
Standard Hyd. Unit
35bar (507.6 psi)/ 15ℓ (4 gal)
●
●
High Pressure Coolant
I/O Extension (IN & OUT)
○
○
Power Coolant System (For Automation)
☆
☆
Coolant Chiller
☆
☆
130ℓ(34.3 gal)
●
●
Machine Guidance (HW-MCG)
☆
☆
150ℓ(39.6 gal)
○
○
Energy Saving System (HW-ESS)
●
●
Rear (Rear)
○
○
Tool Monitoring (HW-TM)
○
○
Front (Right)
-
-
DNC software (HW-eDNC)
○
○
Rear (Right)
○
○
Machine Monitoring System (HW-MMS)
☆
☆
Conversational Program (HW-DPRO)
☆
☆
●
●
☆
☆
☆
☆
Chip Disposal Coolant Tank Chip Conveyor (Hinge/Scraper)
S/W
Special Chip Conveyor (Drum Filter)
Chip Wagon
☆
☆
Standard (180ℓ[47.5 gal])
○
○
Swing (200ℓ[52.8 gal])
○
○
Large Swing (290ℓ[76.6 gal])
○
○
Large Size (330ℓ[87.2 gal])
○
○
Customized
☆
☆
Specifications are subject to change without notice for improvement.
ETC Tool Box Customized Color CAD & CAM
Need Munsel No.
HYUNDAI WIA MACHINE TOOL
E160LC
CnC Turning Center
E160LA
E160 SERIES
Spindle
18 + 19
Specifications Standard & Optional Spindle
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable E160LMA
E160LMC
Safety Device
E160LMA
Main Spindle Hollow Chuck 3 Jaw
6″
●
-
Total Splash Guard
8″
○
●
Chuck hydraulic pressure maintenance interlock
Main Spindle Solid Chuck 3 Jaw
6″
○
-
Electric Device
8″
-
○
Call Light
Standard Soft Jaw (1set)
●
●
Call Light
Chuck Clamp Foot Switch
●
●
2 Steps Hyd, Pressure Device
○
Spindle Inside Stopper
E160LMC
●
●
○(CE:●)
○(CE:●)
1 Color : ■
●
●
2 Color : ■■
○
○
Call Light
3 Color : ■■■
○
○
○
Call Light & Buzzer
3 Color : ■■■B
○
○
☆
☆
Electric Cabinet Light
○
○
5° Index
-
-
Remote MPG
-
-
C-Axis (0.001°)
●
●
Work Counter
Digital
○
○
○(CE:●)
○(CE:●)
Total Counter
Digital
○
○
☆
☆
Tool Counter
Digital
○
○
Multi Tool Counter
Digital
○
○
Chuck Open/Close Confirmation Device 2 Steps Chuck Foot Switch Turret Tool Holder
●
●
Electric Circuit Breaker
○
○
☆
☆
○
○
○
○
Mill Turret
VDI
●
●
AVR (Auto Voltage Regulator)
Straight Milling Head (Axial)
Collet Type,1ea
●
●
Transformer
Angular Milling Head (Radial) Collet Type,1ea
●
●
Auto Power Off
Straight Milling Head (Axial)
-
-
Measurement
Adapter Type
20kVA
Angular Milling Head (Radial) Adapter Type
-
-
Q-Setter
○
○
Boring Sleeve
●
●
Automatic Q-Setter
○
○
Drill Socket
●
●
○
○
U-Drill Holder
○
○
Work Close Confirmation Device TACO (Only for Special Chuck) SMC
○
○
U-Drill Holder Sleeve
○
○
Work Setter
☆
☆
-
-
X axis
-
-
☆
☆
Z axis
-
-
☆
☆
O.D Extension Holder
For Outside Diameter
Swivel Head Tail Stock & Steady Rest
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)
Quill Type Tail Stock
●
●
Environment
Programmable Tail Stock
-
-
Air Conditioner
○
○
Manual Type Hyd. Steady Rest
-
-
Oil Mist Collector
○
○
Standard Live Center
●
●
Oil Skimmer (Only for Chip Conveyor)
○
○
High Precesion Live Center
☆
☆
MQL (Minimal Quantity Lubrication)
☆
☆
2 Steps Tail Stock Pressure System
☆
☆
Fixture & Automation
Quill Forward/Reverse Confirmation Device
○
○
Auto Door
○
○
Tail Stock Foot Switch
☆
☆
Auto Shutter (Only for Automatic System)
☆
☆
Sub Operation Pannel
☆
☆
Coolant & Air Blow Standard Coolant (Nozzle)
●
●
Bar Feeder Interface
○
○
Chuck Coolant (Upper Chuck)
○
○
Bar Feeder (FEDEK)
☆
☆
Gun Coolant
○
○
Extra M-Code 4ea
○
○
Through Spindle Coolant (Only for Special Chuck)
☆
☆
Automation Interface
☆
☆
Thru Coolant for Live Tool
-
-
16 Contact
○
○
Chuck Air Blow (Upper Chuck)
○
○
32 Contact
○
○
Tail Stock Air Blow (Upper Tail Stock)
☆
☆
Parts Catcher
Main SP.
○
○
Turret Air Blow
☆
☆
Turret Work Pusher (For Automation)
☆
☆
Air Gun
○
○
Parts Conveyor
☆
☆
Through Spindle Air Blow (Only for Special Chuck)
☆
☆
Semi Automation System
☆
☆
0.4Bar (5.8 psi)
●
●
Hyd. Device
6Bar (87 psi)
Standard Hyd. Cylinder
Hollow
●
●
Standard Hyd. Unit
35bar (507.6 psi)/ 15ℓ (4 gal)
●
●
High Pressure Coolant
I/O Extension (IN & OUT)
○
○
Power Coolant System (For Automation)
☆
☆
Coolant Chiller
☆
☆
130ℓ(34.3 gal)
●
●
Machine Guidance (HW-MCG)
☆
☆
150ℓ(39.6 gal)
○
○
Energy Saving System (HW-ESS)
●
●
Rear (Rear)
○
○
Tool Monitoring (HW-TM)
○
○
Front (Right)
-
-
DNC software (HW-eDNC)
○
○
Rear (Right)
○
○
Machine Monitoring System (HW-MMS)
☆
☆
Conversational Program (HW-DPRO)
☆
☆
●
●
☆
☆
☆
☆
Chip Disposal Coolant Tank Chip Conveyor (Hinge/Scraper)
S/W
Special Chip Conveyor (Drum Filter)
Chip Wagon
☆
☆
Standard (180ℓ[47.5 gal])
○
○
Swing (200ℓ[52.8 gal])
○
○
Large Swing (290ℓ[76.6 gal])
○
○
Large Size (330ℓ[87.2 gal])
○
○
Customized
☆
☆
Specifications are subject to change without notice for improvement.
ETC Tool Box Customized Color CAD & CAM
Need Munsel No.
550( 425(16.7)
497(19.6)
466(1
375 (14.7)
770(30.3) 565(22.2)
449(17.6)
450(17.7)
40 5 (1.6) (0.2)
940(37)
Specifications
10 170 (0.4) (6.7)
1000(39.3)
340(13.4)
External Dimensions
unit : mm(in)
877(34.5)
153 (6)
CnC Turning Center
E160 SERIES
865(34) - E160C
290(11.4)
1663(65.4)
925(36.4) 298(11.7)
Ø210 (8.2)
1435(56.5)
985(38.7)
450(17.7)
440(17.3)
425(16.7)
850((33.5)
HYUNDAI WIA MACHINE TOOL
E160C/A {HYUNDAI-iTROL}
510(20)
540(21.2) {591(23.3)}
600(23.6)
857(33.7) - E160A
1274(50.1) {1223(48)}
Ø169 (6.6)
20 + 21
510(20)
370(14.5)
620(24.4)
380(15)
1940(76.3) {1991(78.4)}
60(2.3) {111(4.4)}
565(22.2)
449(17.6)
450(17.7)
940(37)
497(19.6) {495(19.5)} 375 (14.7)
170(6.7) {160(6.3)}
40 5 (1.6) (0.2)
10 (0.4)
425(16.7)
340(13.4)
770(30.3)
1000(39.3)
466(18.3)
550(21.6) {520(20.5)}
SPINDLE CENTER
Specifications External Dimensions
unit : mm(in)
E160LC/LMC E160LA/LMA 1127(44.4)
153 (6)
1663(65.4)
995(39.2)
228 (8.9)
Ø210 (8.2)
985(38.7)
1435(56.5)
450(17.7)
440(17.3)
425(16.7)
850((33.5)
865(34) - E160C
290(11.4)
520(20.4)
580(22.8)
630(24.8)
630(24.8)
Ø169 (6.6)
857(33.7) - E160A
510(20)
470(18.5)
620(24.4)
530(20.8)
497(19.6)
425(16.7)
340(13.4)
449(17.6)
450(17.7)
850((33.5)
940(37)
40 5 (1.6) (0.2)
877(34.5)
10 170 (0.4) (6.7)
565(22.2)
375 (14.7)
770(30.3)
1000(39.3)
466(18.3)
550(21.6)
2130(83.8)
153
90 (3.5)
1334(52.5)
Specifications Tooling System
unit : mm
Boring Bar
Facing Holder
Face & I.D Tool
U-Drill Holder
U-Drill
CnC Turning Center
HYUNDAI WIA MACHINE TOOL
E160A/LA E160C/LC
Boring Bar Socket
Boring Bar Holder
Drill
E160 SERIES
10 Stations
12 Stations 22 + 23
Tooling Parts Detail E160A
ITEM
Turning Holder
Tap
O.D Holder
End Mill Driven Holder
Right/Left
Facing Holder
Boring Holder U-Drill Holder
Milling Collet Straight Mill Holder Angular Mill Holder
Boring Socket
Drill
E160LA
E160LC
mm Unit inch Unit mm Unit inch Unit mm Unit inch Unit mm Unit inch Unit
Tapping Collet I.D Holder
E160C
Single
Straight Mill Holder
-
-
-
-
1
1
1
1
-
O.D Holder 1
-
-
-
1
1
1
5
5
4
4
5
5
4
Single : Ø40 (Ø1 1/2′′)
Opt
Opt
Opt
Opt
Opt
Opt
Opt
Ø20 (Ø3/4″)
Opt
Opt
Opt
Opt
Opt
Opt
Ø25 (Ø1″)
Opt
Opt
Opt
Opt
Standard Angular
-
-
-
Standard
-
-
Ø8 (Ø5/16″)
1
1
Mill Holder
Opt
Opt
Opt
Opt
Opt
Opt
-
-
-
-
-
-
-
-
-
-
-
1
1
1
1
1
1
Boring Bar
1
112
Ø16 (Ø5/8″)
1
1
1
1
Ø20 (Ø3/4″)
1
1
1
1
Ø25 (Ø1″)
-
1
-
1
-
1
-
MT 1
1
1
1
1
1
1
1
-
-
-
-
-
-
-
-
-
Specifications are subject to change without notice for improvement.
VDI 30 1 1 Stations
1
I.D Holder
Ø12 (Ø1/2″)
ER Collet
1
Facing Holder
Ø10 (Ø3/8″)
Plug
1
4
Face & I.D ToolOpt
1
1
1
1
1
1
1
1 1
1
1
1
1
1 Bar 1 Boring Socket
1
Drill
1 1
10 Stations Boring Bar Socket
Boring Bar Holder
Specifications
U-Drill Holder
Drill
U-Drill
12 Stations
Tooling System
unit : mm(in)
E160LMA E160LMC
Tap
Tapping Collet
O.D Holder
Straight Mill Holder
Face & I.D Tool
End Mill
Facing Holder
Milling Collet Angular Mill Holder
Plug
VDI 30 12 Stations
I.D Holder
Boring Bar
Boring Bar Socket
Drill
Tooling Parts Detail E160LMA/LMC
ITEM
Turning Holder
O.D Holder
I.D Holder Boring Holder U-Drill Holder
Driven Holder
Right/Left
Facing Holder
Straight Mill Holder Angular Mill Holder
Boring Socket
Drill
mm Unit
inch Unit
4
4
1
1
Single
3
3
Single : Ø40 (Ø1 1/2′′)
-
-
Ø20 (Ø3/4″)
-
-
Ø25 (Ø1″)
-
-
Standard
1
1
Standard
1
1
Ø8 (Ø5/16″)
1
1
Ø10 (Ø3/8″)
1
1
Ø12 (Ø1/2″)
1
1
Ø16 (Ø5/8″)
1
1
Ø20 (Ø3/4″)
1
1
MT 1
ER Collet
Specifications are subject to change without notice for improvement.
-
-
Opt
Opt
Specifications Interference
9 16
ø
.6)
(ø6
11)
30 (1.2)
ø1
60
ø32 (ø1.2) 6.5)
69
6.
3)
(ø6
.6)
E160 SERIES
ø1
(ø
ø (1 460 8. 1)
ø3 (1 2 .3)
ø (ø 270 10 .6 )
(ø ø165
CnC Turning Center
)
(ø19.5
ø2 80
10 (0.4)
ø496
E160A/LA
(ø 11 )
0 (ø
ø28
35 (1.4)ø
ø2
E160C/LC
80
10 (0.4)
35 (1.4)
96 ø4 .5) (19
(ø1 1)
ø280 (ø11)
19
ø7
(ø8.
3)
0(
.5)
ø210
ø2
10
(ø
)
)
E160LMA/LMC
5
ø1
7.5 90
ø 5(
(ø
)
6.1
)
.6 (ø5
ø1
2
ø14
)
ø15
0 (ø
5.9
)
ø97
(ø3.
8)
8.3
6.1
5 (ø
ø15
HYUNDAI WIA MACHINE TOOL
unit : mm(in)
ø95 (ø3 .7)
5 ø9 .7) 3 (ø
ø16 (ø6 0 .3) 194.25 (7.6)
25 (1) 95 (3.7) 65 (2.5)
379.25 (149.3)
24 + 25
Specifications Tooling Travel Range
unit : mm(in)
With Tail Stock
E160A
E160C
OD tool
OD tool
30 145 (5.7) 5 (1.2) (0.2)
120 46 (4.7) (1.8)
330 (13)
15 (0.6)
16 (1.6)
7 (0.3)
142 (5.6)
259 (10.2) 314 (12.4)
192(7.5) 260(10.2)
90 (3.5)
53 (2.1)
260(10.2)
30(1.2) 40 (1.6)
90 (3.5)
ø55 (2.2)
120 46 (4.7) (1.8)
ø210(8.3)
ø55 (2.2)
ø169 (6.6)
5 (0.2)
Tail stock (Opt.) 46 48 (4.7) (1.9)
72(2.8) 80(3.1) 111(4.4)
80 (3.1)
129 (5.1)
30(1.2) 40 (1.6)
330 (13)
ø32 (1.3)
ø210(8.3)
ø32 (1.3)
5 (0.2)
120 46 (4.7) (1.8)
15(0.6) 25 45 80(3.1) (1)(1.8) 5 (0.2)
48 (1.9)
Tail stock (Opt.) 44 95 32 (1.7) (3.7) (1.2)
17 (0.7)
ID tool
330 (13) 15(0.6) 25 45 80(3.1) (1)(1.8) 5 (0.2)
ø169 (6.6) 53 (2.1)
55 (2.2)
6 (0.2)
ID tool 44 95 32 (1.7) (3.7) (1.2)
5 (0.2)
145 (5.7)
5 (0.2)
57 (2.2)
25 (1)
20 (0.8)
20 (0.8)
ø169 (6.6)
273(10.7) 330(13)
48 (1.9)
5 (0.2)
20 (0.8)
330 (13)
ø210 (8.3)
44 95 32 (1.7) (3.7) (1.2)
121 (4.8)
Without Tail Stock
51(2)80(3.1)
200(7.9)
111(4.4)
(Quill Out) (Quill In)
(Quill Out) (Quill In)
(Tail Stock Travel)
200(7.9)
Specifications Tooling Travel Range
HYUNDAI WIA MACHINE TOOL
unit : mm(in)
E160LC/LMC E160LA/LMA OD tool
E160 SERIES
CnC Turning Center
OD tool
ID tool
Straight milling head 26 + 27
Angular milling head
Tail stock (Opt.)
Specifications Specifications
[
ITEM
CAPACITY
E160A mm(in)
Ø480 (18.9″)
Swing Over the Carriage
mm(in)
Ø285 (11.2″)
Max. Turning Dia.
mm(in)
Max. Turning Length
mm(in)
Bar Capacity
mm(in)
Chuck Size
Motor (Max/Cont.) Torque (Max/Cont.)
A2-5
Rapid Traverse Rate (X/Z)
Tool Size
0.001˚ 165/530 (6.5″/20.9″)
165/460 (6.5″/18.1″)
30/30 (1,181/1,181) LM GUIDE 12
EA
OD
mm(in)
□20 (0.8″)
ID
mm(in)
Ø32 (1.2″) 0.1
sec/step kW(HP)
-
8.8/3.0 (11.8/4)
r/min
-
4,500
N・m(lbf・ft)
-
45/20 (33.2/14.8)
mm(in)
-
Ø16(0.6″) ER25
Type
-
-
Taper
-
Torque (Max/Cont.) Collet Size
NC
165/330 (6.5″/13″)
m/min(ipm) -
Milling Tool Speed (rpm)
Machine
-
deg mm(in)
Motor (Max/Cont.)
power Supply
15/11 (20.1/14.7) 95.5/52.5 (70.4/38.7)
BELT
Indexing Time
tank Capacity
11/7.5 (14.7/10) [10.8/9 (14.5/12)] 70/35.8 (51.6/26.4) [75.6/68.7 (55.8/50.7)]
-
No. of Tools
TAIL STOCK
kW(HP)
6,000
-
Slide Type
live tool
Ø55 (2.2″) 6,000 [6,000]
Spindle Nose
Travel (X/Z/B)
turret
6″
r/min
N・m(lbf・ft)
450 (17.7″)
Ø45 (1.8″)
Spindle Type
C-axis Indexing
Feed
Ø190 (7.5″) 510 (20.1″)
mm(in)
Spindle Speed (rpm)
E160LMA
Ø280 (11″) 300 (11.8″)
inch
Spindle Bore
Spindle
E160LA
Swing Over the Bed
] : Option
VDI30 MT4
Quill Dia.
mm(in)
Ø55 (2.2″)
Quill Travel
mm(in)
80 (3.1″)
Travel
mm(in)
Coolant Tank
ℓ(gal)
Lubricating Tank
ℓ(gal)
Electric Power Supply Thickness of Power Cable Voltage
1.8 (0.5) 13
Height
mm(in)
Weight
kg(lb) -
16 Over 16
Sq
220/60 (200/50*)
V/Hz mm(in)
470 (18.5″) 130 (34.3)
kVA
Floor Space (L×W)
Controller
200 (7.9″)
1,940×1,660 (76.4″×65.4″) [1,991×1,660 (78.4″x65.4″)]
2,130 x 1,660 (83.9″×65.4″) 1,602 (63.1″)
2,400 (5,291)
2,840 (6,261)
HW FANUC i Series [E160A/LA : HYUNDAI-iTROL]
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors) Specifications are subject to change without notice for improvement.
Specifications Specifications
[
mm(in)
Ø285 (11.2″)
Max. Turning Dia.
mm(in)
Max. Turning Length
mm(in)
Bar Capacity
mm(in)
Motor (Max/Cont.) Torque (Max/Cont.)
126/64.4 (92.9/47.5) [171.8/126 (126.7/92.9)] [136/113.4 (100.3/83.6)]
171.8/94.5 (126.7/69.7)
Rapid Traverse Rate (X/Z)
Tool Size
-
deg mm(in)
165/330 (6.5″/13″)
0.001˚ 165/530 (6.5″/20.9″)
LM GUIDE 10
12
□25 (1″)
□20 (0.8″)
EA
OD
mm(in)
ID
mm(in)
Torque (Max/Cont.) Collet Size Type Taper
Ø32 (1.2″) 0.1
sec/step kW(HP)
-
8.8/3.0 (11.8/4)
r/min
-
4,500
N・m(lbf・ft)
-
45/20 (33.2/14.8)
mm(in)
-
Ø16(0.6″) ER25
-
-
VDI30 MT4
-
Quill Dia.
mm(in)
Ø55 (2.2″)
Quill Travel
mm(in)
80 (3.1″)
Travel
mm(in)
Coolant Tank
ℓ(gal)
Lubricating Tank
ℓ(gal)
Electric Power Supply Thickness of Power Cable Voltage
200 (7.9″)
1.8 (0.5) 13
Height
mm(in)
Weight
kg(lb) -
16 Over 16
Sq
220/60 (200/50*)
V/Hz mm(in)
470 (18.5″) 130 (34.3)
kVA
Floor Space (L×W)
Controller
165/460 (6.5″/18.1″)
30/30 (1,181/1,181)
m/min(ipm) -
Milling Tool Speed (rpm)
NC
15/11 (20.1/14.7)
A2-6
Motor (Max/Cont.)
Machine
N・m(lbf・ft)
11/7.5 (14.7/10) [15/11 (20.1/14.7)] [10.8/9 (14.5/12)]
BELT
Indexing Time
power Supply
kW(HP)
4,000
-
No. of Tools
tank Capacity
Ø62 (2.4″) 4,000 [4,000] [4,000]
-
Slide Type
TAIL STOCK
8″
Spindle Nose
Travel (X/Z/B)
live tool
r/min
450 (17.7″)
Ø51 (2″)
Spindle Type
C-axis Indexing
turret
Ø190 (7.5″) 510 (20.1″)
mm(in)
Spindle Speed (rpm)
Feed
Ø280 (11″) 280 (11″)
inch
Spindle Bore
E160LMC
HYUNDAI WIA MACHINE TOOL
Swing Over the Carriage
Chuck Size
Spindle
E160LC Ø480 (18.9″)
CnC Turning Center
CAPACITY
E160C mm(in)
E160 SERIES
ITEM Swing Over the Bed
] : Option
1,940×1,660 (76.4″×65.4″) [1,991×1,660 (78.4″x65.4″)]
2,130 x 1,660 (83.9″×65.4″) 1,602 (63.1″)
2,500 (5,511)
2,930 (6,459)
HW FANUC i Series [E160C/LC : HYUNDAI-iTROL]
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors) Specifications are subject to change without notice for improvement.
28 + 29
Controller HYUNDAI-iTROL (E160A/LA/C/LC) Control & Composition
Compensation
Number of axis/Spindles
2 axes (X, Z) / 3 axes (X, Z, C)
Backlash compensation
Number of axis/Spindles, max.
8 axes (Axis + Spindle)
Leadscrew error compensation
Color display
TFT 10.4" Color (800 x 600)
Measuring system error compensation
Keyboard
QWERTY Full Keyboard
Feedforward control (Speed control)
Part program storage
1MB, 3MB, 5MB
Safety Function
Addition of part program on CF card
Safe torque off (STO)
Transfer Function
Safe brake control (SBC)
Feedrate override
0% ~ 200%
Safe stop 1 (SS1)
Transfer value input range
Âą 999999999
Diagnostic Function
Unlimited rotation of rotation axis
Alarm/Message , Alarm log
Acc./Dec. with jerk limitation
PLC status/LAD online display
Measuring systems 1 and 2, selectable
PLC remote connection (Ethernet)
Travel to fixed stop
Automation Support Function
Auto servo drive tuning
Actual velocity display
Spindle Function
Tool life management
As time / As amount
Spindle override
0% ~ 150%
Work counter/Cycle time
Embedded
Spindle speed, max. programmable value range
1000000 ~ 0.0001
2D simulation
Automatic gear stage selection
Manual Operation
Spindle orientation
Manual handle/Jog transfer
Spindle speed limitation
Manual measurement of workpiece / tool offset
Rigid tapping
Automatic tool/Workpiece measurement
Spindle control with PLC
Automatic/Program reference approach
Interpolation Linear interpolation axis, max.
Automatic Operation 4 axis
Program run as using CF card/USB
Circle via center point and end point
Program control/modification
Circle via interpolation point
Block search
Helical interpolation
Reposition
Non-uniform rational B splines
Preset (Set actual value)
Continuous - path mode with programmable rounding clearance
Data Transmission Ethernet network
Program Function
USB memory stick & CF card
Subroutine levels, max.
7
Interrupt routines, max.
2
Number of levels for skip blocks
2
Convenience Function Processing setting
Coordinate system setting, Auto tool length measurement
Polar Coordinates
Processing support
Tool Monitoring, Spindle overload monitoring
Dimensions inch/metric, changeover manually or via program
Maintenance
Turret Guidance, I/O monitoring, Manual
Management
Soft MCP, M/G code List
Dynamic preprocessing memory FIFO
SMART machining
Look ahead
1
Energy saving function (ECO)
Absolute/Incremental command
G90 / G91
Machine Monitoring System (MMS Lite)
Scaling/Rotation
Language
Read/Write system variables
Standard support language
Chinese Simplified, English, Korean
Block search Option
Edit background Processing program number, max.
750
Using of CF Card, USB
Maximum skip block number
Basic coordinate number, max.
1
MDI program save/load
Work coordinate number, max.
100
Teach-In mode
Basic/Work coordinate programming change
3D simulation
Scratching function
Real time simulation
Global and Local user data (GUD/LUD)
Shop Turn
Global program user data
Spline interpolation
Conversational Cycle Program
Program remote control in network
Tool Function
Language
Tool radius compensations Tool offset selection via T/D numbers Tools / Cutting edges in tool list
10
DRF offset
128 / 256, 256 / 512
Monitoring Function Working area limit Software and Hardware limit Zero-speed/Clamping monitoring 2D/3D protection zones Contour monitoring
Figures in inch are converted from metric values. Specifications are subject to change without notice for improvement.
Except for working area/Collision check Conversational Program
Chinese Traditional, French, German, Italian, Portuguese, Spanish
Controller HYUNDAI WIA FANUC i Series
Least setting Unit Least input increment Inch / Metric conversion High response vector control Interlock Machine lock Backlash compensation Position switch LCD / MDI Feedback Stored stroke check 1 Stored stroke check 2, 3 PMC axis control Operation Automatic operation (Memory) MDI operation DNC operation Program restart Wrong operation prevention Program check function Single block Search function Interpolation functions Nano interpolation Positioning Linear interpolation Circular interpolation Exact stop mode Dwell Skip Reference position return
All axes / Each axis All axes ± 0 ~ 9999 pulses (Rapid traverse / Cutting feed) 8.4 inch / 10.4 inch color LCD Absolute motor feedback Over travel
Needed DNC software / CF card
Dry run Program Number / Sequence Number
G00 G01 G02, G03 Single : G09, Continuous : G61 G04, 0 ~ 9999.9999 sec G31 1st reference : G28 2nd reference : G30 Ref. position check : G27
Thread synchronous cutting Thread cutting retract Variable lead thread cutting Multi / Continuous threading Feed function / Acc. & Dec. control Manual feed Cutting Feed command Feedrate override Rapid traverse override Override cancel Feed per minute Feed per revolution Look-ahead block Program input Tape Code Optional block skip Absolute / Incremental program Program stop / end Maximum command unit Plane selection Workpiece coordinate system Manual absolute Programmable data input Sub program call Custom macro G code system Programmable mirror image G code preventing buffering Direct drawing dimension program
Rapid traverse Jog : 0~2,000 mm/min (79 ipm) Manual handle : x1, x10, x100 pulses Reference position return Direct input F code 0 ~ 200% (10% Unit) F1%, F5%, F25% / 50%, F100% G98 G99 1 block EIA / ISO 1 ea G90 / G91 M00, M01 / M02, M30 ± 999,999.999 mm (± 99,999.9999 inch) X-Y : G17 / Z-X : G18 / Y-Z : G19 G52, G53, 6 pairs (G54 ~ G59) Fixed ON G10 10 folds nested #100 ~ #149, #500 ~ #549 A G51.1, G50.1 G4.1 Including Chamfering / Corner R
Multiple repetitive cycles Ⅰ, Ⅱ Canned cycle for turning Auxiliary function / Spindle speed function Auxiliary function Level-up M Code Spindle speed function Spindle override Multi position spindle orientation Rigid tapping Constant surface speed control Tool function / Tool compensation Tool function Tool life management Tool offset pairs Tool nose radius compensation Geometry / Wear compensation Direct input of offset measured B Editing function Part program storage size No. of registerable programs Program protect Background editing Extended part program editing Memory card program edit Data input / output & Interface I/O interface Screen hard copy External message External key input External workpiece number search Automatic data backup Setting, display and diagnosis Self-diagnosis function History display & Operation Run hour / Parts count display Maintenance information Actual cutting feedrate display Display of spindle speed / T code Graphic display Operating monitor screen Power consumption monitoring Spindle / Servo setting screen Multi language display Display language switching LCD Screen Saver Unexpected disturbance torque Function for machine type Cs contour control (C & A axes) Polar coordinate interpolation Cylindrical interpolation Canned cycle for drilling Spindle orientation expansion Spindle synchronous control Torque control Y axis offset Arbitrary angular control Composite / Superimposed control Balance cutting Option Optional block skip Fast ethernet Data server Protection of data at 8 levels Tool offset pairs Part program storage size Polygon turning (2 Spindles) Helical interpolation Manual Guide i Dynamic graphic display
Figures in inch are converted from metric values. The FANUC controller specifications are subject to change based on the policy of company CNC supplying.
M & 4 digit High speed / Multi / Bypass M code S & 4 digit , Binary output 0% ~ 150% (10% Unit) M19
HYUNDAI WIA MACHINE TOOL
Simultaneously controlled axes Designation of spindle axes
2 axes (X, Z) / 3 axes (X, Z, C / X, Z, B) / 4 axes (X, Z, Y, C) 5 axes (X, Z, B, C, A) / 6 axes (X, Z, Y, B, C, A) 2 axes [Max. 4 axes] 3 axes (1 path) X, Z, Y, B axes : 0.001 mm (0.0001 inch) C, A axes : 0.001 deg X, Z, Y, B axes : 0.001 mm (0.0001 inch) C, A axes : 0.001 deg G20 / G21
] : Option
G96, G97 T & 2 digit + Offset 2 digit 128 pairs G40, G41, G42
1280m (512KB) 1000 ea
Copy, move and change of NC program
CnC Turning Center
Control axes
[ Program input
E160 SERIES
Controlled axis / Display / Accuracy Compensation
RS 232C serial port, CF card, USB memory Embedded Ethernet interface
Alarm & Operator message & Operation
Spindle / Servo load etc. Spindle & Servo Support 20 languages Selection of 5 optional Languages Screen saver BST (Back spin torque limit) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Mill, MS, Y, SY, LF-Mill, TTMS, TTSY MS, SY TTS, TTMS, TTSY MS, SY TTS, TTMS, TTSY MS, SY TTS, TTMS, TTSY Y, SY, TTSY Y, SY, TTSY MS, SY TTS, TTMS, TTSY MS, SY TTS, TTMS, TTSY
9 ea Needed option board Needed option board 200 pairs 5120m (2MB) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Conversational auto program
30 + 31
Global Network
+\XQGDL :,$ 0DFKLQH 7RROV $PHULFD
+\XQGDL :,$ 0DFKLQH 7RROV (XURSH 5DXQKHLP 6HUYLFH &HQWHU 5DQXKHLP 5 ' &HQWHU
%(,-,1* %5$1&+ 2)),&(
+($'48$57(5
:8+$1 2)),&( 4,1*'$2 %5$1&+ 2)),&( &+(1*'8 %5$1&+ 2)),&( &+21*4,1* 2)),&( ,1',$ %5$1&+ 2)),&(
-,$1*68 +<81'$, :,$ +\XQGDL :,$ 0DFKLQH 7RROV &KLQD 6+$1*+$, %5$1&+ 2)),&(
*8$1*=+28 %5$1&+ 2)),&(
Global Network Headquarter HYUNDAI WIA MACHINE TOOL
Changwon Technical Center / R&D Center / Factory 153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533) TEL : +82 55 280 9114 FAX : +82 55 282 9680
Uiwang Technical Center / R&D Center
Hyundai WIA Machine Tools America
Jiangsu HYUNDAI WIA
Chengdu Branch Office
Company No.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China
NO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China
TEL : +86 512 5672 6808 FAX : +86 512 5671 6960
TEL : +86 028 8665 2985 FAX : +86 028 8665 2985
Hyundai WIA Machine Tools Europe
Hyundai WIA Machine Tools China Shanghai Branch Office
Qingdao Branch Office
Kaiserleipromenade 5, 63067 Offenbach, Germany
1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China
TEL : +49 69271 472 701 FAX : +49 69271 472 719
TEL : +86 021 6427 9885 FAX : +86 021 6427 9890
Raunheim Service Center Raunheim R&D Center
Beijing Branch Office
Wuhan Office
Frankfurter. 63, 65479 Raunheim, Germany
Floor 14, Zhonghangji Plaza B, No.15 Ronghua South Road, BDA Dist., Daxing Dist., Beijing, China 100176
306-2, A Tower,Jiayu Gpmggian, No12 Chuangye Road, Economic Development Zone, Wuhan, Hubei, China
TEL : +49 6142 9256 111 FAX : +49 6142 9256 100
TEL : +86 010 8453 9850 FAX : +86 010 8453 9853
TEL : +86 027 5952 3256 FAX : +86 027 5952 3256
India Branch Office
Guangzhou Branch Office
Chongqing Office
#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, India TEL: +91-44-3290-1719
Room 311, Unit 1-3, Poly Tal Tu Wun, Hanxi Avenue, Panyu District, Guangzhou, China
Room 951, #3, Jinrongcheng T3, Jiangbei, Chongqing, China
265, Spring Lake Drive, Itasca, IL, 60143 TEL : +1 630 625 5600 FAX : +1 630 625 4733
TEL : +86 020 8550 6595 FAX : +86 020 8550 6597
Room 1207, Cai Fu Building, 182-6 Haier Middle Road, Qingdao, China TEL : +86 532 8667 9334 FAX : +86 532 8667 9338
TEL : +86 23 6701 2970
E160 SERIES
OVERSEAS OFFICES
CnC Turning Center
37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082) TEL : +82 31 596 8209 Fax : +82 55 210 9804
32 + 33
http://machine.hyundai-wia.com Head Office & Factory 153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
Tel +82 55 280 9500
Overseas Sales Team 16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 31 593 8173
Hyundai WIA Machine Tools America 265 Spring Lake Drive,Itasca, IL, 60143
Tel +1 (630) 625 5600
Fax +1 (630) 625 4733
Hyundai WIA Machine Tools Europe Kaiserleipromenade 5, D-63067 Offenbach, Germany
Tel +49 69271 472 701
Fax +49 69271 472 719
India Branch Office #4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, India
Tel +91 44 3290 1719 2016-11 003.002 ENG