Passive House Plus issue 25 (Irish edition)

INSULATION | AIRTIGHTNESS | BUILDING SCIENCE | VENTILATION | GREEN MATERIALS

PASSIVE HOUSE+ S U S TA I N A B L E B U I L D I N G

GOOD DAY AT BLACKROCK South Dublin passive home mixes science & design

HEAT PUMP GRANTS Issue 25 €4.75 IRISH EDITION

Details on retrofit incentives revealed

Insulating concrete formwork Our essential guide

Award-winning

Spiddal passive dream home

All bales, no bills

Zero energy passive home made of straw

2 | passivehouseplus.ie | Issue 21

MORE LIGHT AND EXCEPTIONAL DESIGN IN THE PIXEL WINDOW THE LATEST OKNOPLAST CREATION The PIXEL system is the first of its kind on the European market. It perfectly fits the latest trends of modern architecture. The distinguishing features of the PIXEL window are its unique modern shape, first-rate thermal properties, but most of all: allowing up to 22% more light to enter the interior.

EXTRAORDINARY DESIGN

When creating the new PIXEL window, we wanted it to be a significant element of the interior and its decor, not only a necessary element. We hope that customers who decide to purchase the PIXEL will also consider it an important component in the fit-out of their home – says Mike Zyrek, Director of R&D department of Oknoplast Group. That is why Oknoplast offers the perfectly square shape of the window together with a specially designed handle for this model.

EVEN MORE LIGHT

The idea of this solution is based on minimising the solar barrier, meaning making the window profile thinner and consequently increasing the overall area of the glass, while using special glass panes with maximum clarity. PIXEL boasts slim and elegant 6-chamber profiles for both the frame and the sash, manufactured in class A with overall thickness of 70mm. Thanks to this, a room receives even 22% more natural light with a PIXEL window.

Modern houses are characterised by large panes of glass, which reduce the barrier between the interior and exterior.

We constantly search for solutions offering more and more light, because with the right adjustment we can use the light to visually change the room’s size and character. PIXEL is the modern window that helps in this – adds Mike Zyrek.

THE SECURITY & FUNCTIONALITY OF MODERN WINDOWS

Despite having remarkably slimmer window profiles, the functional and technical properties of the PIXEL system maintain an impressively high standard. The make-up of the new profile makes it possible to have different glazing packages – such as safety and anti-burglar.

Additionally, the PIXEL window adopts an original system of steel reinforcements protected by multiple patents, which ensures the highest level of security. The reinforcements are made from steel folded multiple times to guarantee the solidity and stability of the structure, thus allowing for designing windows of larger areas, which can perfectly suit the contemporary approach to homes.

The new system also involves specially made for Oknoplast

new fitting ProLight from Winkhaus – the famous German leader in window ironmongery. The ProLight fitting provides many innovative functional properties as well as adding to the aesthetic qualities of the PIXEL window. The tilt & turn sash offers the function of multi-stage tilting adjustment called ‘Four Seasons’. It gives us the possibility of ventilating rooms all year round, regardless of the weather outside – states the chairman of Oknoplast.

ADVANCED THERMAL PROPERTIES

The large surface area of modern windows is not an obstacle in sustaining the right heat balance. The primary factor there is good thermal insulation – which has been maintained despite introducing slimmer window profiles – to ensure minimal heat losses and thus reduced costs of heating the building.

The technologists working on creating the PIXEL window in Oknoplast laboratories were able to achieve Uw=0.83 for a reference size, which makes this window suitable for Nearly Zero Energy Building (nZEB) projects. It is also an extraordinary result for such thickness of the profile (70mm).

The relatively larger area of the glass compared with standard windows gives the glazing a bigger role to play in thermal insulation of the window. Given that modern triple-glazed units can achieve Ug=0.5, this means that the overall U-value of the window improves. Additionally, more glazing results in more sunlight entering and consequently heating the room. Reduced heat loss together with increased solar gain give the PIXEL window a natural advantage over other windows. ph+ | advertising feature | 3

Publishers

Temple Media Ltd PO Box 9688, Blackrock, Co. Dublin, Ireland t +353 (0)1 210 7513 | t +353 (0)1 210 7512 e info@passivehouseplus.ie www.passivehouseplus.ie

Editor

Jeff Colley jeff@passivehouseplus.ie

Deputy Editor

Lenny Antonelli lenny@passivehouseplus.ie

Reporter

John Hearne john@passivehouseplus.ie

Reporter

Kate de Selincourt kate@passivehouseplus.ie

Reporter

John Cradden cradden@passivehouseplus.ie

Reader Reponse / IT

Dudley Colley dudley@passivehouseplus.ie

Accounts

Oisin Hart oisin@passivehouseplus.ie

Art Director

Lauren Colley lauren@passivehouseplus.ie

Design

Aoife O’Hara aoife@evekudesign.com | evekudesign.com

Contributors

Tony Godwin, FCD Architecture | Seamus Hoyne, Tipperary Energy Agency | Simon Jones, Aereco Paul Kenny, Tipperary Energy Agency | Simon McGuinness, Simon McGuinness Architects | Paul O’Brien, Sola | Marc O’ Riain, doctor of architecture Mel Reynolds, architect | Peter Rickaby, Rickaby Thompson Associates | Richard Sherlock, Mitsubishi Electric | David W Smith, journalist Jason Walsh, journalist

editor’s letter F

inding certainty in an increasingly uncertain world can be a tonic, something absolute to cling on to amid the chaos of escalating trade wars, government by tweet, Brexit and its potential implications for peace and prosperity, and extreme weather events that can throw all shapes of unpleasant – even catastrophic – surprises at our societies. So, when we find that elusive thing – the certainty of comfort, resilience and the conditions to protect our health, well-being and bank balance for many decades to come — we should be embracing it wholeheartedly.

Well-designed, evidence-based approaches to low energy building provide a rare example of this. While large swathes of the UK and Ireland were in the jaws of the Beast from the East in March, a stream of snowed-in passive house occupants with time on their hands were on social media, reporting that their homes were performing as normal, gleefully ignorant of the arctic tundra at their doorsteps.

It brings to mind the words we so typically hear from passive house occupants when we try to give our readers a sense of what life is like in these buildings: they have to go outside to check what the weather’s like.

As the days get longer and the weather – hopefully – improves, this same phenomenon should occur during hot weather too.

Of course, that’s not to say that even the best-designed low energy buildings won’t tend to be warmer in summer than winter.

But approaches like passive house, with due care, can help us to avoid some of the shocking stories of overheating that are starting to emerge, such as the monitoring study I recently came across by academics at Southbank University, of a London apartment building which hit temperatures as high a 47.5C – while adjacent rooms with the same aspect but strategically placed external blinds were nearly 20C lower.

ISSUE 25 Findings like these are too easily dismissed, with the main argument being that London is a special case in terms of overheating risk.

And while there’s truth in that, this study included some other worrying findings. So while the high point of 47.5C was registered on a September day when the mercury hit 27.9C outside the building — with the two preceding days hitting peaks of over 31C – a later, milder period in the study showed three successive days where outside temperatures didn’t exceed 21.5C, but the room temperature peaked at between 42C and 45C each day.

The buildings we design today will likely be put through the ringer by climate change and a future where weirdly divergent weather extremes may cause us to curse our lack of foresight. Paradoxically, climate change offers us the certainty of uncertain, volatile, testing conditions. Yet there are approaches we can take – such as the passive house standard, and even then with at least one eye on how projected climate conditions 30 years or more down the road may affect the building – which can help to protect us from the worst impacts of climate extremes.

Most worryingly, our dilemma may no longer be the question of a distant threat that we ignore as a society while we struggle to change our ways. Forget about threatening our children and grandchildren in later life, climate change is becoming a clear and present danger to the health of our children now – and even to our grandparents. We’re reaching a point where climate change mitigation isn’t about some notionally selfless do-gooder-ism for an intangible future benefit. It is becoming about our immediate self-interest.

Regards, The editor

Print

GPS Colour Graphics www.gpscolour.co.uk | +44 (0) 28 9070 2020

Cover

Tierney Haines passive house Photo by Stephen Tierney

Publisher’s circulation statement: 9,000 copies of Passive House Plus (Irish edition) are printed and distributed to the leading figures involved in sustainable building in Ireland including architects; consulting; m&e and building services engineers; developers; builders; energy auditors; renewable energy companies; environmental consultants; county, city and town councillors; key local authority personnel; and to newsagents nationwide via Easons.

Disclaimer: The opinions expressed in Passive House Plus are those of the authors and do not necessarily reflect the views of the publishers.

ABC Certified Average Net Circulation of 7,123 for the period 01/07/16 to 30/06/17.

4 | passivehouseplus.ie | Issue 25

About

Passive House Plus is an official partner magazine of the International Passive House Association. Passive House Plus (Irish edition) is an official magazine of Éasca and the Passive House Association of Ireland.

We’ve cracked it...

The low cost solution for reduced carbon emissions

Available from Find out more hi-thermlintels.com ph+ | editor’s letter | 5

CONTENTS COVER STORY

10

08

24

COLUMN

Breaking the mould in Thamesmead

The net effect of poor insulation levels, underheating and under-ventilation in buildings pose a major public health threat. Peter Rickaby describes one pioneering London project that’s taking a practical, methodical – and scalable – approach to solving the problem.

10

INTERNATIONAL

16

NEWS

20

34

24

COMMENT

Dr Marc Ó Riain looks at the pioneering passive solar designs of Fred Keck, and architect Mel Reynolds argues that inertia with state-owned land is exacerbating Ireland’s housing crisis.

6 | passivehouseplus.ie | Issue 25

The Galway passive house inspired by a water tower Generational differences in taste were successfully married by a concern for energy efficiency in this contemporary, award-winning passive house in An Spidéal, which comes within a whisker of the nZEB standard.

A selection of passive & eco builds from around the world, this issue features a boat designed according to passive house principles, with the artic climate in mind, and a contemporary passive house by Key Architects on Japan’s rural Shikoku Island.

A preview on the must-attend SEAI Energy Show & key sustainable building events, plus the latest news on house building activity, heat pump grants, and the lowdown on imminent changes to Part F & L of the building regulations.

CASE STUDIES

34

48

COVER STORY: South Dublin passive house rises out of the ordinary

This skilfully designed new passive house in Blackrock manages to be light-filled and strikingly contemporary while taking its design inspiration from the very ordinary Dublin street on which it sits.

All bales, no bills

In the classic story of the three little pigs, the big bad wolf may have blown down the first little piggy’s house of straw with consummate ease — but he wasn’t reckoning with this pioneering, energy billshredding Suffolk project, the UK’s first load-bearing straw bale passive house.

48

58

69

80

58

80

Slope and glory

When architect Tony Godwin wandered into a seminar on the passive house standard at Ecobuild ten years ago, it was the start of a journey that would eventually see him design and build his own passive home on a sloping site — and learn some hard lessons along the way to achieving a comfortable, ultra-low energy family home with tiny energy bills.

86

Tipperary Energy Agency at 20: insights on how to kick-start climate action

One of Ireland’s pioneering and most consequential green organisations, Tipperary Energy Agency, turned 20 at the end of February, evolving from one man buried in sawdust to a 24 strong team whose efforts are influencing national policy and earning European plaudits. But why has the agency endured and grown, and what lessons can be learned to help others play their part in delivering the transition we so urgently need to low energy buildings and clean energy generation? Two of the central figures in the agency’s development spill the beans, along with some of the many partners the agency has worked with over the years.

Insulating Concrete Formwork

As demand for super-insulated and airtight building structures grows, insulating concrete formwork (ICF) is rapidly gaining popularity as a method of construction. But what exactly is ICF, what are its key advantages, and why is it so well suited to passive house and low energy construction?

Heat pump grants – what you need to know

As of 16 April, owners of pre 2011 Irish homes are now eligible for generous grants to retrofit heat pumps, and in so doing help to create comfortable, economical, low carbon homes. But what’s the thinking behind the scheme, and what results can participating homeowners expect?

THE PH+ GUIDE TO:

94

98

MARKETPLACE

Keep up with the latest developments from some of the leading companies in sustainable building, including new product innovations, project updates and more.

HELP DESK

The devil is in the details

The use of properly calculated, well executed thermal bridging details can make it much cheaper and easier to achieve good energy ratings and comply with tightening building regulations. But these benefits can only be realised if buildings are designed and constructed in accordance with the details – which requires great care – argues Simon McGuinness. ph+ ph+ | international | contents | 7

Breaking the mould in Thamesmead The net effect of poor insulation levels, underheating and under-ventilation in buildings poses a major public health threat. Peter Rickaby describes one pioneering London project that’s taking a practical, methodical – and scalable – approach to solving the problem.

O

ne day two years ago I visited Thamesmead for the first time. Architecturally, it was an eye-opening experience. Built in the 1960s and 1970s by the GLC, this huge estate in south-east London, if overlaid on central London, would stretch from St Paul’s Cathedral to Marble Arch. It is home to thousands of households and has all the iconic features of mid-twentieth century social housing: a line of high-rise tower blocks with views over the Thames estuary; medium-rise deck-access blocks, one of them half a kilometre long; courtyards, alleyways, a ribbon of parkland; and a lake surrounded

and every bedroom; bathrooms that at first looked as though they had been painted black; parents cleaning mould daily with bleach and trying to keep their toddlers away from both; even in summer, mould-stained paintwork everywhere.

How could social housing be in this condition in the UK in the twenty-first century? Peabody recently acquired the estate through a merger with Gallions HA, who had themselves acquired it through stock transfer.

Other than new windows there has been almost no investment in Thamesmead for forty years: the most significant change was

Thamesmead was the perfect setting for Stanley Kubrick’s 1971 film A Clockwork Orange. Not much has happened there since then.

by housing, which featured evocatively in the original architects’ drawings. Thamesmead pre-dates the Thames barrier, so circulation was originally above potential flood level, via raised decks and walkways that are still in use; the ground level accommodated only garages, now colonised by residents’ downward extensions. The construction is reinforced concrete with pre-cast concrete panels; a few of the original metal-framed single glazed windows remain.

Thamesmead was the perfect setting for Stanley Kubrick’s 1971 film of Anthony Burgess’s dystopian novel A Clockwork Orange. Not much has happened there since then. Now Crossrail (the Elizabeth Line) is bringing investment to Thamesmead, land values are rising, old homes are being demolished, new homes are being built. There is an ambitious regeneration plan for the area, and a legacy of problems.

I was invited to Thamesmead that day by Peabody’s sustainability manager. Would I like to join a team to develop and deliver a condensation, damp and mould (CDM) strategy for Thamesmead? This request proved to be not only an opportunity to make a positive difference to people’s homes, but a big challenge. Subsequent visits to Thamesmead homes revealed the worst condensation and mould I have seen in thirtyfive years as a consultant: homes with mould covering walls and ceilings in living rooms

8 | passivehouseplus.ie | Issue 25

replacement of the visionary but inefficient and worn-out district heating system with individual gas-fired central heating systems.

Before that change most residents were warm and dry, perhaps over-heated; since then many of them have been overtaken by fuel price rises and become fuel-poor, and their poorly insulated, underheated and under-ventilated homes have become cold, damp and mouldy.

For the last two years our team of Peabody staff, surveyors, consultants, contractors, suppliers and installers has walked the length and breadth of Thamesmead several times over. We have made room-by-room CDM and ventilation surveys. We have risk-assessed the stock, classified homes into three levels of mould risk and devised three levels of intervention. We have initiated a programme of energy advice that will eventually reach every household. We have applied mould washes, replaced boilers and undercut doors.

We have tested and adopted a smart heating controller that not only reduces resident’s fuel costs but also allows us to monitor conditions inside their homes, before and after improvement. We wrote a challenging ventilation specification that only one ventilation supplier could meet, and they have configured their demand controlled mechanical extract ventilation (MEV) system to each of the dwelling types on the estate. We have tried (and failed) to cut holes for ventilation ducts

through 190mm thick reinforced concrete floors. We have re-routed ventilation ducts to avoid penetrating panels containing asbestos.

We have installed external air inlet grilles at height without scaffolding or ladders. We have used data from smart heating controllers to target homes for improvement, to monitor the effectiveness of interventions, and to brief the energy advisor. We have also rigorously evaluated everything we have done. More subjectively, I recently visited some of the homes that were improved last year, to reassure myself that the mould has not returned this winter.

Naively, I thought at first that Thamesmead’s mould problem must be unique, but many other, similar examples in the UK and Ireland have come to my attention. The award-winning Thamesmead CDM strategy has established a model of best practice. It demonstrates the strength of a dedicated, multi-disciplinary team taking an evidencedbased, systematic approach and using new technology to address a wicked problem that has frustrated landlords and householders for decades. I am proud to be part of Peabody’s team tackling the CDM problem at Thamesmead, but I am ashamed that there is such a problem to be tackled, in Thamesmead or anywhere else. n

Dr Peter Rickaby is an independent energy and sustainability consultant working in the building and housing industries. He is a Trustee of the National Energy Foundation, a member of the Each Home Counts Implementation Board, chairs the BSI Retrofit Standards Task Group and is the training lead at the UK Centre for Moisture in Buildings.

Other members of Peabody’s Thamesmead CDM team include the contractor Vinci Facilities, the ventilation installer NJS Electrical, the ventilation supplier Aereco, the smart heating controller supplier Switchee, and many members of Peabody’s staff including sustainability officers, surveyors, contract managers and a heroic energy advisor.

DIAL BEFORE YOU DIG YOURSELF INTO A HOLE Hitting a gas pipeline could mean major disruption to your work, or much worse. If you’re planning to break ground, always check the location of gas pipelines first.

Call 1850 42 77 47 or email dig@gasnetworks.ie

ph+ | column | 9

INTERNATIONAL

A SELECTIO N O F PAS S I V E & E C O BUI L DS F RO M ARO U ND TH E WO RL D

10 | passivehouseplus.ie | Issue 25

WANT TO KNOW MORE? The digital version of this magazine includes access to exclusive galleries of architectural drawings.

The digital magazine is available to subscribers on www.passive.ie

Photos: Key Architects

MASAKI PASSIVE HOUSE, SHIKOKU, JAPAN

K

ey Architects are rapidly gaining a reputation as Japan’s leading passive house design firm, and first came to the attention of Passive House Plus with their stunning Tochoji Temple in Tokyo, which we featured in issue 22.

Their latest passive house project is a contemporary dwelling in Ehime prefecture on Japan’s rural Shikoku Island, boasting a wide-open southerly orientation and stunning views over the adjacent farmland towards the wooded peaks beyond.

And wood is at the heart of this striking contemporary dwelling: the plywood-framed walls are insulated with woodfibre, and timber cladding also features heavily. Meanwhile the windows are made of aluminium-clad timber, and the house’s main source of space heating is a stove that burns wood logs.

Because Shikoku’s climate is warm and temperate, with daytime temperatures averaging 27.5C in August, the house didn’t need as much insulation as a typical passive house in northern Europe — U-values for the walls range between 0.18 and 0.21, for example (less than 0.15 is the norm for the UK and Ireland).

The thick clay that forms the external leaf of the walls also helps to buffer moisture in the humid local climate, while providing airtightness without the need for membranes. And a solar thermal array located beside the vegetable garden also helps to provide for space heating and hot water.

Considering all of that, it’s no surprise the house won Japan’s third annual Eco House Design Award in 2017.

ph+ | international | 11

Photos: Peter Gallinelli

THE NANUQ, PASSIVE HOUSE BOAT

D

esigned, built and skippered by Swiss architect Peter Gallinelli, the Nanuq is a 60 foot sailboat intended to serve both as a scientific base and accommodate a team of six through an arctic winter.

And with the arctic climate in mind, the cabin that sits at the heart of the boat is designed according to passive house principles — Gallinelli calls it his ‘passive igloo’.

Gallinelli’s aim was to design a boat that would allow him to comfortably “pass through an arctic winter in a self-sufficient dwelling without the use of non-renewable energy”.

The project was inspired by Norwegian explorer Fridthof Nansen’s legendary 19th century boat Fram, which — with its oak frame, cork insulation and triple glazed windows — is often regarded as an early example of passive design.

The igloo at the core of the Nanuq is constructed from a frame of fibreglass and epoxy resin skins sandwiching a core of high performance polystyrene insulation, giving the cabin walls a passivelevel U-value of 0.12.

Triple glazed windows feature too, while the completed ‘igloo’ weighs only 1,300kg and can be dismantled into five easily transportable parts.

And just like a passive house, the boat also features a heat recovery ventilation system, albeit an experimental version tailored for the particular stresses of the arctic conditions. Incoming fresh air from outside — which is often colder than -30C in winter — is first preheated by the relatively balmy seawater (at about -2C) in a submerged tube,

12 | passivehouseplus.ie | Issue 25

before entering a marine grade heat exchanger. Care was required to prevent the heat exchanger icing up, with water from condensation being directed into a bottle, while the air outlet also had to be adapted to prevent blocking by the formation of ice.

A 1.5 kW wind turbine combined with four solar PV panels – which contributed nothing between the sun setting for winter in October and rising in February – power the boat, with a back-up diesel generator, and every effort was taken to reduce electricity use to a minimum of just 0.5 kWh per day – for a boat serving 2.5 occupants.

In order to test the performance of the passive igloo, the boat was voluntarily trapped in sea-ice in north-west Greenland during the winter of 2015-2016 and monitored during 10 months of ‘stationary navigation’.

According to Gallinelli, the biggest unforeseen difficulty was the unexpected lack of wind during the arctic winter, which meant the boat had to rely on a back-up forced air diesel heater for heat rather than wind-powered direct electric heating. Gallinelli notes that a heat pump, which was omitted for budgetary reasons, would have provided 100% of thermal comfort needs during a more typical arctic winter.

Still, the boat used just 330 litres of diesel over the winter — ten times less than average homes in the region.

Powered passively by the wind, the Nanuq will venture northward again this summer as part of PolarQuest 2018, a scientific mission to measure the impact of human pollution in arctic waters, assess the impact of micro and nano plastics in the region, and study the origin of high energy cosmic rays and their impact on global warming.

SHOWROOMS: CORK, DUBLIN, GALWAY & BELFAST UNPARALLELED CHOICE OF PASSIVE CERTIFIED PRODUCTS – OUTWARD OPENING, INWARD OPENING, UPVC, ALUMINIUM, ALUCLAD

GROUND BREAKING U-VALUES FROM AS LOW AS 0.47W/M²K

T. 064 7751151 E. info@munsterjoinery.ie

www.munsterjoinery.ie WINDOWS & DOORS ph+ | international | 13

Photo: D Gonzalez

Photo: M Amme

Photos: xxxxx

Photo: Kalle Schmidt

14 | passivehouseplus.ie | Issue 25

Photo: Peter Gallinelli

kingspaninsulation.ie

Shaping the Future Built Environment Pioneering new technologies with energy conservation at heart.

Kingspan offering the widest range of insulation products and solutions.

Kingspan Optim-R is a vacuum insulated panel which is an optimum performance next generation insulation solution.

Kingspan Optim-R achieves an outstanding low thermal conductivity, with the thinnest possible solution to insulation problems.

Kingspan Kooltherm Insulation is our premium performance rigid phenolic insulation with low thermal conductivities and can be used in an extensive range of new and existing building applications.

Kingspan Therma Insulation is our high performance polyisocyanurate insulation which can also be used in an extensive range of new and existing building applications.

Kingspan Styrozone Insulation is a high performance rigid extruded polystyrene insulant designed to meet the needs of specialist projects which require a heavy duty robust insulation.

Kingspan Styrozone Insulation is available in a number of high compressive strength grades to suit a range of service loads.

The Kingspan TEK Building System comprises of structural insulated panels (SIPs) with a high performance fibre-free rigid urethane insulation core, sandwiched between two layers of Oriented Strand Board type 3 (OSB/3).

It is used to construct walls and roofs, and intermediate floors using I-beams or open web joists.

Kingspan Aerobord Insulation offers a wide range of high performance expanded polystyrene insulation boards for floors, walls and pitched roofs. Also available in the Kingspan Aerobord Insulation are high performance platinum expanded polystyrene beads suitable for pumping into cavity wall constructions and ph+ | international | 15 an Insulated Foundation System.

NEWS SEAI Energy Show returns to RDS on April 18 & 19

(above) According to SEAI, over 5,000 people attended the 2017 Energy Show, with the SEAI Energy Theatre proving a popular draw.

T

he Sustainable Energy Authority of Ireland (SEAI) Energy Show, Ireland's leading business energy event, returns to the RDS on Wednesday 18 April and Thursday 19 April 2018.

The annual free event features 150 exhibitors of sustainable energy technologies and services, and is a must for those who want to network, learn, build business opportunities and see the latest innovative energy technologies. Last year, over 5,000 people attended the SEAI Energy Show and according to exhibitors, over €80m worth of business was won at the event.

Commenting on this year’s SEAI Energy Show, SEAI CEO Jim Gannon said: “The Irish market for sustainable energy solutions is set to reach €3 billion by 2020 as homeowners, businesses and communities move towards cleaner energy. The SEAI Energy Show offers a unique opportunity to learn about technologies and services that can help improve the energy efficiency of our buildings, and you can find out about renewable sources of energy.

“The SEAI Energy Show is well established in the Irish calendar and it continues to be a key networking energy event, bringing together buyers, suppliers and speakers to showcase the latest energy innovations.”

16 | passivehouseplus.ie | Issue 25

Visitors will see everything from large-scale renewable energy solutions, to sustainable building products and smart energy management systems at the show.

Free test drives will be available in the latest electric vehicles and best practice demonstrations will be given on building fabric solutions. Visitors will also be able to download a custom app for the SEAI Energy Show, to help facilitate networking opportunities.

Attendees will also be able to link up with industry and professional associations, including CIBSE, the Heat Pump Association, Engineers Ireland, and the Association of Plumbers and Heating Contractors.

Exhibitors and attendees will also have the opportunity to discuss business opportunities with representatives from the embassies attending, including Argentina, Canada, Czech Republic, Denmark and Romania.

The SEAI Energy Theatre will offer free talks with industry experts on the latest policy and market developments in energy efficiency and renewable energy. Talks of particular interest to those involved in the sustainable building sector include: • A session on the changing trends in

Ireland’s energy use and supply, and Ireland’s recent progress towards its renewable energy targets. The session also aims to engage the audience to think about big ideas to address Ireland’s goals to reduce carbon emissions.

• A session on the requirements for nearly zero energy buildings (nZEBs) and major renovations within the building sector, which will inform designers and contractors of the impact of the new regulations.

• A panel discussion on SEAI’s new heat pump grant. The session will cover the process of becoming an SEAI registered heat pump installer, and of getting a house heat pump ready.

• A session on applying behavioural economics to encourage energy saving behaviours. It will inform contractors, installers, and volunteer groups how to design their outreach and marketing activities to maximise the number of consumers choosing to retrofit their homes.

The SEAI Energy Show is a free business event and will run from 10am to 6pm on Wednesday, 18 April and 9am to 5pm on Thursday, 19 April 2018. For further details and to register visit www.seai.ie/ energyshow. •

BER data shows 70% increase in new homes in Q1 & higher energy performance

Green Room 2018 to focus on nZEB and corporate sustainability on 2 May

S

eventy per cent more BERs for new homes were issued in the first quarter of 2018 than in the same period last year, new analysis by Passive House Plus has revealed.

Seven hundred and thirty seven final BERs were issued for new homes from January to March, compared to 431 for Q1 in 2017. The analysis specifically includes new homes where the year of construction is listed as 2018, and where the BER was published in Q1 of 2018. The rate of BERs being published for new homes tends to be low in the first quarter due to the seasonal nature of both construction and the property market. To date the total number of BERs for new homes built in 2017 totals 7,600 units – with just under 1,400 BERs for homes built in 2017 published so far in 2018.

The average BER score for Q1 2018 was 52.99 kWh/m2/yr, compared to 54.45 kWh/ m2/yr for 2017-built homes. The average floor area in Q1 2018 was 122.85 sqm, compared to 127.74 sqm for new homes in 2017.

Building fabric standards showed signs of marginal improvement, with average U-values of 0.17 W/m2K (compared to 0.18 in 2017), 0.12 for roofs and floors (compared to 0.12 and 0.13 respectively), and windows and doors at 1.2 and 1.4 respectively, (compared to 1.2 and 1.5). Meanwhile average airtightness test results improved too, reaching 3.38 m3/ hr/m2 at 50 Pa, compared to 3.66 m3/hr/m2 for homes built in 2017.

Natural ventilation was chosen in 63.2% of new homes in Q1 2018, up from 56.8% for 2017. Seventy two per cent of naturally ventilated homes had a permeability result of 5 m3/hr/m2 or less, meaning 40% more equivalent area of background ventilators would be required to comply with Part F of the building regulations – a requirement that is widely regarded as being routinely breached, indicating that a substantial number of new homes may be both noncompliant with Part F, and under-ventilated.

English ventilation expert Ian Mawditt has stated that indoor air quality begins to decline in naturally ventilated buildings once air leakage reduces below 10 m3/hr/ m2 at 50 Pa. Of new homes built in Q1, 49.7% (-5% on 2017) had condensing gas boilers as their main heat source, while 35% had heat pumps (-1.4%), 13.8% (+9.3%) were connected to centralised or district heating systems, and just 1.4% (-2.4%) had oil boilers.

Due to the relatively small sample size in 2018 to date, there is scope for significant noise in the data – for instance this may occur if a large number of BERs are published for one development.

In terms of house types built in Q1, the results were 11.5% detached houses, 25.5% terraced housing, 45.2% semi-ds and 17.8% apartments. •

(clockwise from top left) Kevin McGillycuddy of the EIB & Louise Ellison of Hammerson PLC will be among the speakers at the Green Room event on 2 May, while world-leading materials expert Prof Michael Braungart will speak at the IGBC's Re-Source 2018 event on 21 June; delegates at an IGBC event on nZEB in 2017.

T

he Irish Green Building Council's annual Green Room event takes place this year on 2 May in the Alex Hotel, Dublin, and this year’s conference focuses on the imminent arrival of nearly zero energy building standards, and on the role of 'corporate action in our transition to a low carbon built environment’.

The new version of Part L of the building regulations for non-domestic buildings comes into force from the beginning of 2019, leaving designers, developers and contractors with little time to get up to speed on the new regulations.

The afternoon Green Room conference, which kicks off at 2pm, will feature a variety of speakers on non-domestic nZEB standards, including energy expert Andy Lundberg of Passivate on fabric efficiency and eliminating thermal bridging, consulting engineer David Walshe of In2 on modelling ventilation and comfort, and OCSC’s Donal O'Connor on 'designing effective renewables'. This session will be chaired by Orla Coyle of SEAI. In the session on 'corporate responsibility, climate change and the

built environment', Charles van Thiel of the Global Real Estate Benchmark will discuss sustainability in the real estate sector, Kevin McGillycuddy of the European Investment Bank will examine prospects for investment in nearly zero energy buildings, while Louise Ellison of Hammerson PLC will discuss how the company plans to become 'net positive' for carbon, water and socio-economic impacts by 2030.

Meanwhile, the IGBC has also announced that leading materials expert Prof. Michael Braungart will speak at the organisation's Re-Source 2018 event, which will be held at Wood Quay Venue on 21 June.

This event is focused on designing buildings to minimise embodied carbon, and creating a circular economy for construction materials, as well as healthy places to live and work.

Prof. Michael Braungart is a chemist and widely known for his work with the Cradle to Cradle design concept, which he developed together with the American architect William McDonough. •

ph+ | news | 17

Heat pump grant of €3,500 now available

A

new of grant of €3,500 for heat pumps is available for Irish homeowners from 16 April as part of a range of new government incentives to improve the energy efficiency of Irish dwellings.

The government has also introduced new supports of €300 for attic insulation, €700 for heating control upgrades, and up to €6,000 for external insulation as it seeks to stimulate the deep retrofit of Ireland’s housing stock.

In a statement to Passive House Plus, the Sustainable Energy Authority of Ireland (SEAI) said the new grant scheme has been designed to drive building fabric upgrades while at the same time encouraging homeowners to move away from fossil fuels and towards electricitybased heating, as Ireland’s electricity grid begins to decarbonise and more renewables come on stream. Grants for oil and gas boilers have been removed at the same time.

A grant of €3,500 will be available for air-towater, water-to-water and ground-source heat pumps, while €600 is available for air-to-air heat pumps.

“For optimum efficiency, heat pumps should only be installed in well-insulated homes,” SEAI said. “If the home is not properly insulated it is highly likely that the home will not be heated properly and the homeowner’s electricity bills will be higher than expected.”

To this end, SEAI will now require homeowners applying for heat pump grants to use independent technical assessors to calculate their home’s ‘heat loss indicator’, which will determine whether the dwelling is suitable for a heat pump. A €200 grant is also available to pay for this. You can read a full report on the new heat pump grant and how it will operate on page 69 of this issue of Passive House Plus.

“As a country, we have a critically important task ahead to ensure our homes are energy efficient,” said environment minister Denis Naughten regarding the launch of the new support. “All of us have a responsibility to act on climate change and improving our home’s energy performance is a significant step in decreasing our collective carbon footprint.”

Meanwhile SEAI CEO Jim Gannon said: “Already, over 370,000 homes in Ireland have availed of home energy grants. The best way to reduce your energy costs in the long-term is to simply use less. There are a range of grants available for attic and wall insulation, heating upgrades and solar thermal. At the very least, we are asking people to find out more about the extra supports now available and to see what might be suitable for their home. Now more than ever, we need to see people take action where they can, and the additional support we are putting in place should help make this happen.” •

18 | passivehouseplus.ie | Issue 25

Concerns raised about ventilation in proposed Part F & L change

C

oncerns have been raised that proposed changes to Irish building regulations — designed to bring Ireland in line with EU requirements that new homes be ‘nearly zero energy buildings’ (nZEBs) from the end of 2020 — could encourage sub-standard approaches to ventilation and airtightness.

Draft versions of new technical guidance documents (TGDs) for Parts L (conservation of fuel and energy) and F (ventilation) of the regulations were expected to be published imminently for public consultation as Passive House Plus went to print.

Several industry sources briefed on the new TGDs confirmed the details of the proposed changes.

The main change to TGD L will see the maximum energy performance co-efficient (MEPC) drop from 0.4 to 0.3, as the department has previously revealed.

The energy performance co-efficient (EPC) measures the energy efficiency of a dwelling relative to the 2005 version of Part L. This means that a dwelling with an EPC of 0.3 should consume, in theory, 30% of the energy of one built to the 2005 standards.

The changes are also expected to see the maximum permitted airtightness for new homes cut from 7 m3/hr/m2 to 5 m3/hr/m2 at 50 Pascals of pressure, while under Part F, the department has indicated that natural ventilation — including ‘hole in the wall’ vents — will continue to be allowed where the airtightness of a dwelling is between 3 m3/hr/m2 and 5 m3/hr/m2, with mechanical ventilation required for homes with an airtightness better than 3 m3/hr/m2.

Several industry sources raised serious concerns about this approach.

“Many of us are worried about the impact of the new regulations on indoor air quality and build quality,” one source said. “There is no real evidence that a home with between 3 and 5 m3/hr/m2 at 50pa achieves sufficient indoor air quality without a properly designed ventilation system.”

The proposed changes also raise the question of how a developer who has specified natural ventilation at design stage can ensure their project then falls into the narrow airtightness margin between 3 m3/hr/m2 and 5 m3/ hr/m2 once on site.

One source raised the prospect that this approach could encourage developers to first beat the target of 3 m3/hr/m2 and then subsequently damage the airtightness layer to worsen the result — something which could potentially lead to localised air infiltration and condensation within the building structure.

“Any home buyer would be best advised to run a mile from a new home with a ventilation strategy designed by random Stanley knife slashes,” the source said.

As it stands, under the current version of Part F, dwellings with an airtightness of 5 m3/hr/m2 or better must have 40% or more equivalent area of natural background ventilation than those with a worse airtightness figure.

But anecdotal evidence suggests few builders are actually applying this rule on site, so while 56.8% of homes constructed in 2017 employed natural ventilation, the average airtightness of those was well under 5.0, and a number of sources in the ventilation industry Passive House Plus has spoken to suggested that the requirement to increase equivalent area of natural ventilators by 40% is being routinely ignored.

The proposed new changes to TGD L are also expected to tighten the ‘backstop’ window U-value from 1.6 to 1.4, to allow credit to be included for hot water flow restrictors, and to change the renewable energy target from a kWh/m2/yr figure to a percentage – 20% of the building’s primary energy use, excluding unregulated energy.

At the time of going to print, the Department of Housing declined to confirm or deny the detail of the proposed changes to Parts L and F prior to their official publication. •

With an extensive range of colour blends and complementary specials, the traditional, hand-crafted aesthetic of AG’s Heritage Collection creates a look that developers, contractors and designers love.

Patented production techniques in our modern cast brick technology mean no soluble salts – eliminating the risk of reoccurring efflorescence – and the brick’s style, strength and durability creates very low levels of wastage on site. And if you need a final box ticked, just ask us about our stock levels and short lead times.

please see ag.uk.com for details

To discover the full range of bricks visit ag.uk.com, contact us on 0044 28 8778 8112 or email specifications@ag.uk.com

Since 1960

AG.UK.COM ph+ | news | 19

The House of Tomorrow, 1933 In his third column on visionary eco-buildings of the 20th century, Dr Marc Ó Riain looks at the pioneering passive solar designs of Fred Keck.

I

f Maria Telkes and Eleanor Raymond were the modern mothers of active solar in the 1940s, then the Keck Brothers were surely the undisputed patriarchs of passive solar in the 1930s.

Whilst contemporary predecessors like Franks Lloyd Wright’s prairie-style Robie house (1909) may have featured overhangs and Mies van Der Rohe’s Villa Tugendhat (1930) featured optimal orientation, passive solar gain and thermal mass, they did not conform with the key principles of solar design.

Fred and William Keck developed a series of experimental houses starting with the 1933 Chicago World’s Fair. The Kecks may have stumbled on the potential of solar gain with their ‘Dymaxion’ like octagonal house (figure 1). The building, which opened in June in Chicago was described by William Keck as “hotter than hell”, as the air conditioning struggled to deal with the solar gain. This is potentially a seminal moment as Fred Keck began to understand the potential of solar gain to deliver winter heat but also realised the need to control it to avoid overheating in summer.

Figure 2: Keck’s orientation for sunlight section (1937)

After 1933 Fred Keck would never again use as much glass, perhaps acknowledging the issues of solar gain and heat loss through the glazing. Double glazing was in its infancy, struggling with engineering issues like the retaining seal between the panes, primarily due to material expansion. The Kecks would become one of the first adopters of Liberty Owens & Ford’s ‘Thermoplane’ (sealed double glazing) in the late 1930s. As an architectural engineer, Fred also pioneered water ponds on flat roofs to offset the conductive heat gain through the opaque fabric.

usability of the spatial design and its climatic suitability. Indeed, he offered that the building is so suited to contemporary living the motherin-law can sleep in the porch…impressive!

Fred Keck strove to find manufacturing collaborators to measure the post-occupancy performance of his buildings, but without success. Whilst he pioneered innovative solutions to deliver thermally comfortable housing, his more well-known contemporaries were taking less sympathetic approaches.

Seminal architects of the international movement, like Mies and Johnson, were designing dysfunctional glass follies, so utterly uninhabitable, that they perhaps represent a visual polemic to the idea that form follows function. To many Farnsworth and the Glass House were the zenith of an aesthetic language, and architecture schools have venerated these models as the paradigms of practice. Unfortunately, this paradigm of architectural practice has held sway for 70-80 years, and the singular focus on form and composition over performance and function has cost society, the environment and the

The house was described by William Keck as “hotter than hell”, as the air conditioning struggled to deal with the solar gain.

Figure 1: Keck’s illustration of the House of Tomorrow

In subsequent house designs Fred Keck became focused on the passive control of heat in his house designs. He experimented unsuccessfully with retractable external blinds (like Koolshade) on the Bruning House (1935) and Fricker House (1938) but abandoned this idea due to issues with manufacture, supply and wear. Perhaps inspired by the Robie House, which was down the road from his own, Keck calculated optimal angles for eave overhangs in 1937 for the Cahn House (Denzer, 2013). This sketch would become a key convention for architecture students across the world. The Cahn House had a 49-degree shading angle providing more solar protection than the 1909 Robie House (66 degrees).

20 | passivehouseplus.ie | Issue 25

Keck’s principles of orientation, shading, plan, double glazing, active ventilation and rooftop pools come together between the seminal design of Sloan House and a $5,000 variation designed for Coronet magazine in 1940. Keck described the house in layman’s language: “Note the wide eave line; its extent is calculated to shut out the hot summer sun and admit the warm winter sun, and also to protect the house from showers, when the windows are open, making it unnecessary to get up at night to close the windows during a rainstorm.

On the coldest winter’s day, when the sun is shining, enough of the sun’s heat will enter the house to heat it comfortably, giving the interior and the atmosphere of a spring day. The exterior of the house is of wood and stone and glass, and has a 3-level flat roof made to carry a thin layer of water” (Coronet, 1940).”

Keck’s description of the house does not refer to energy at all, preferring to focus on the

public as a whole.

Perhaps there are still lessons and starting points to be learned from the Kecks’ innovative work that truly demonstrates a nexus between architecture and engineering.

Continuing to explore the empiricist work of the solar pioneers, we will look at the work of Frank Lloyd Wright’s Solar Hemicycle and Usonian Homes in the next issue. n

Dr Marc Ó Riain is the president emeritus of the Institute of Designers in Ireland, a founding editor of Iterations design research journal and practice review, a former director of Irish Design 2015, a board member of the new Design Enterprise Skillsnet and has completed a PhD in low energy building retrofit, realising Ireland’s first commercial NZEB retrofit in 2013.

Gather with the energy experts.

Your competitors are.

18&19 th

th

APRIL

RDS Ireland’s leading companies and experts from the energy sector will be at the SEAI Energy Show 2018. Give your company a competitive edge with seminars, technology demonstrations, electric car test drives and networking opportunities at the must attend event for everyone with an interest in energy and business.

Free BUSINESS ONLY Exhibition | Register now at seai.ie/energyshow @seai_ie #EnergyShow18

ph+ | column | 21

Water, water, everywhere, nor any drop to drink Inertia with state-owned land is exacerbating Ireland’s housing crisis, argues housing commentator and architect Mel Reynolds, in spite of the state possessing enough zoned land to make a major dent in solving the problem.

O

ne is reminded of the Rime of the Ancient Mariner when listening to housing discussions.

There are a number of popular narratives, most borrowed from abroad. “Planning is the problem... high standards are making development unfeasible... we need smaller apartments...” etc.

Analysis is frequently inconclusive and most of the above statements, if incorporated as policy, in many cases will further inflate land values.

Increasing new home supply does not necessarily cause prices to drop (i.e. there is no causation), and household sizes are increasing. In November 2017, the Society of Chartered Surveyors estimated that 35% of a typical apartment sales price is land value and developer’s profit; minor proposed apartment standards cost savings will have little effect.

Planning is not the problem – statutory processes are clearly defined and anyone involved in the industry knows how long planning takes, and programmes accordingly.

The much talked about ‘fast track’ planning process introduced last year saves just four weeks off standard timescales.

There is talk of a land bubble. Private equity has piled into the land market in recent years.

Speculative land hoarding is a feature of the Irish property market (aided by tax breaks) and for those who purchased in the downturn, paper profits have been impressive.

Much industry sentiment is based on the ‘myth of scarcity’ – how planning restrictions on residential zoned land is driving up prices and making development unfeasible, a common thread in US housing discussions.

But is development land scarce?

Residential Land Availability Survey The Residential Land Availability Survey is published by the Department of Housing, Planning and Local Government and records all residential zoned land in the state, county by county. In 2015, the figure for zoned land included in current development plans (so-called stage 2) was 17,345 Ha, which had a capacity for 414,712 dwellings nationwide.

Figures for land which could be zoned in future development plans (stage 1) are even higher – 27,263 Ha with a capacity for 611,302 homes.

The amount of land currently zoned residential in Co Dublin is 2,645 Ha, with a capacity for 116,705 dwellings.

To put this abundance in context, compare

22 | passivehouseplus.ie | Issue 25

Residential Land Availability Survey 2014 - Nationwide

Stage 2 Local Authority

Area (Ha)

Potential No. of Dwellings

Carlow

515

8168

Cavan

252

3850

Clare

779

8541

Cork

1476

25995

Donegal

232

5333

D/L Rathdown

399

19710

Fingal

1159

36025

Galway

257

5727

Kerry

440

6279

Kildare

974

23455

Kilkenny

200

4587

Laois

336

5162

Leitrim

64

1028

#Limerick City & Coco

832

21816

Longford

194

2955

Louth

60

2935

Mayo

166

2735

Meath

1697

52207

Monaghan

118

2015

Offaly

535

13667

Roscommon

540

9041

Sligo

257

4199

South Dublin

798

31276

#Tipperary

1477

19647

#Waterford City & Coco

780

14754

Westmeath

278

7954

Wexford

1105

17481

Wicklow

835

18687

City Councils Cork Dublin

79

3472

298

29694

Galway

303

6317

TOTALS

17,435

414,712

Table 1: Residential Land Availability Survey - Nationwide (source: Department of Housing, Planning and Local Government)

Residential Land Availability Survey 2014 - Nationwide

Stage 2 Local Authority

Area (Ha)

Potential No. of Dwellings

D/L Rathdown

399

19710

Fingal

1159

36025

South Dublin

798

31276

Dublin

298

29694

TOTALS

2,654

116,705

Table 2: Residential Land Availability Survey - Co Dublin (source: Department of Housing, Planning and Local Government)

the figure of land available to the number of homes completed and registered in 2017 on

How long will officials be let hoard the considerable land-banks under their control before public opinion demands action?

the National BER Research Tool database (less than 10,000, as reported in the previous issue of PH+), the most accurate indicator of house-building activity at present. Nationwide, and in Dublin, there is currently enough zoned land for over forty years at current build levels. The abundance of zoned land compared to housing output is even more pronounced in other areas such as Cork City and county.

Rebuilding Ireland’s Housing Land Map The lack of public housing activity has given rise to calls for a new state agency to compulsory purchase land. Do we need this?

Rebuilding Ireland’s Housing Land Map was launched by former housing minister Simon Coveney in April 2017 and is an interactive map showing 700 locations of residential zoned land owned by local authorities (200 Ha is owned separately and in addition by the Housing Agency). At the official launch, department officials noted that this represented only a portion of the land owned by local authorities and excludes other lands in the ownership of the Housing Agency and other state organisations.

Remarkably, local authorities own enough zoned land to accommodate a minimum of 38,000 dwellings – in Co Dublin enough for 19,000 dwellings.

In an 18-month period, from 2016 to Q2 2017, local authorities built 440 dwellings – including 170 in Co Dublin. There is enough publicly owned zoned residential land to last forty years at output levels.

Data from other sources confirms that local

authority-owned land is in fact a multiple of these figures. The full extent of local authority land ownership has yet to be confirmed, but initial estimates put it as high as 20% of all residential zoned land in some locations. No scarcity here.

Fingal County Council built 78 homes in the past three years, yet owns enough land to construct thousands of homes. The lack of official ambition for state-owned land appears systemic and suggests that low local authority build levels is official Department of Housing policy.

There is no drought Recent experience has seen when the state partners up with co-operatives the results can be impressive – affordable family homes for sale for below €190,000 in Co Dublin.

As affordability continues to deteriorate in the rental and sales sectors, it is inevitable that officials will be forced to start actively managing state-owned land to provide affordable housing and public housing.

The question is how long will officials be let hoard the considerable land banks under their control before public opinion demands action?

However, for now it looks like speculative land positions are secure in the face of continued official inertia.

The industry (and shareholders) should take note – when it comes to development land, there is no drought. The balloon that lifts you up can very quickly become the weight that drags you down. n

Rebuilding Ireland

Local Authority

Area (Ha)

Potential No. of Dwellings

Carlow

17

270

Cavan

7.5

115

Clare

68.3

748

Cork

89.3

1573

Donegal

55.5

1276

D/L Rathdown

52

2569

Fingal

89

2766

Galway

74.5

1660

Kerry

65

930

Kildare

89

2143

Kilkenny

9.9

227

Laois

14

215

Leitrim

6

96

56.3

1476

#Limerick City & Coco Longford Louth

2

31

2.9

142

Mayo

0.5

8

Meath

26.5

815

Monaghan

4.9

84

Offaly

25.5

651

Roscommon

34.8

583

26

425

43

1685

48.6

572

Sligo South Dublin #Tipperary #Waterford City & Coco

43

813

Westmeath

32.1

918

Wexford

30.3

479

Wicklow

17

381

City Councils Cork Dublin

Table 3: “Rebuilding Ireland’s Housing Land Map” (source: Department of Housing, Planning and Local Government)

Local Authority + Housing Agency land

45

1978

120.6

12017

Galway

14.6

304

TOTALS

1,211

37,950

Local authorities own enough zoned land to accommodate a minimum of 38,000 dwellings – in Co Dublin enough for 19,000 dwellings.

Mel Reynolds is a registered architect with more than 25 years of experience in project management, conservation, urban design and developer-led housing. He is also a certified passive house designer.

Advertise with us.

It is always a pleasure to work with the Passive House Plus team.

They provide a wealth of information, support and time to provide the best advert. Launching a new product is never easy, but in the space of only two months we’ve received over 150 enquiries through two issues of the magazine and all have been very fruitful.

We have been quoting straight after the magazine is out. A lot of the customers enquiring have genuine current projects and this is reflected in how many respond to our follow ups. It is no doubt in my mind that this team are one of the best I have dealt with out of the many publications we use. They deliver and they deliver quality!

- Elizabeth Assaf, owner, Urban Front

To enquire about advertising, contact Jeff Colley on +353 (0)1 2107513, or email jeff@passivehouseplus.ie

www.passivehouseplus.ie ph+ | column | 23

WANT TO KNOW MORE? The digital version of this magazine includes access to exclusive galleries of architectural drawings.

The digital magazine is available to subscribers on www.passive.ie

24 | passivehouseplus.ie | Issue 25

T H E GALWAY PAS S I V E H O U S E

INSPIRED BY A WATER TOWER Generational differences in taste were successfully married by a concern for energy efficiency in this contemporary, award-winning passive house in An Spidéal, which comes within a whisker of the nZEB standard.

Words by Jason Walsh

Building type: 200 sqm blockwork house with external insulation

€250 Per year (heating & hot water)

Location: An Spidéal, Galway Budget: €310,000 Completed: November 2015 Standard: Passive house (cert pending)

ph+ | case study | 25

T

úr Uisce was designed as a house of contrasts: a contemporary design located in the rural Gaeltacht idyll of An Spidéal; a modern design that balances the ludic with the brut; and a self-consciously contemporary structure that takes energy use as seriously as it does form. The house won the sustainability award at the inaugural Building and Architect of the Year awards last year.

Architect Helena McElmeel says that the decision to build an ultra-low energy building was one the clients had already made, rather than it being a case of her broaching the idea to the bewildered.

“The clients were a father and son, so there were two generations at play, and that was interesting. The passive element was very important to the father, a priority for him. In fact, when I first met him he had [an edition of] Passive House Plus on the windowsill,” she says.

The dramatic contemporary aesthetic took a little longer to come together, however. “We started with more of a vernacular reference, yet still modern, but that evolved to where it is now.”

Where it has evolved into is a modern design with significant use of glass and a cantilevered upper storey resting across the ground floor, a site-specific element that evolved from visits to the locale.

“The site is in front of the owners’ previous house. The idea of the perching came from the site itself, with the hill behind and the old water tower up there. It’s a play on something feeling a bit precarious,” says McElmeel.

McElmeel’s architectural practice has emphasised energy efficiency for some time. “I’ve had an interest in it. The first low energy house I constructed was in about 2008, which is when it first came into my radar. Around that time I did the master’s [of architecture, in advanced energy and environmental studies] at the Centre for Alternative Technology in Wales,” she says.

Nonetheless, and despite changes to the socio-political climate, certain aspects of sustainable building remain a hard sell in Ireland, she says, such as the environmental impact of materials.

“In an ideal world we would be building a lot of buildings with lower embodied energy

4

The idea of the perching came from the site itself, with the hill behind and the old water tower up there.

It’s a play on something feeling a bit precarious.

1

ENTRANCE LOBBY

2

DINING

3

KITCHEN

4

LIVING

5

STORE/ PLANT ROOM

6

BEDROOM

7

BATHROOM

8

COURTYARD

8

3

5

2

6

1

GROUND FLOOR

26 | passivehouseplus.ie | Issue 25

The design is incredible: even when you’re inside, you feel like you’re sitting in the garden.

[but] the costs associated… put people off, and there are cultural issues too.”

In the case of Túr Uisce (Irish for water tower], McElmeel focused on a super-insulated and airtight building fabric in order to allow for dramatic facades, significant use of glazing, and an overall form that was not simply a cube — while nonetheless ensuring that energy use remained very low.

“When you have this form of design, one that’s quite contemporary, external insulation helps as all of the elements, such as the large windows, are within that inner leaf. Also, in terms of airtightness there was work to be done. There were challenges with the structural elements, but they were all dealt with in the end. The contractor’s understanding of airtightness and his commitment to it was essential,” she says.

From the owners’ point-of-view, things could not have gone better. Joe Folan, the senior of the father-and-son duo, told Passive House Plus that his time in the house, which achieved an A2 BER and came within a whisker of meeting the nZEB standard – has been ideal.

“I’m two years in the house now [and] it’s absolutely fantastic. It’s the most comfortable house you could possibly live in.

There’s nothing I would do to change it,” he says. High praise indeed.

Folan and his son built this house on the site of their existing family home after

Photography: www.kelvingillmor.com

SIDE / SOUTHWEST ELEVATION

SIDE - NORTHEAST ELEVATION

FRONT / SOUTHEAST ELEVATION

ph+ | case study | 27

Energy Performance Coefficient Carbon Performance Coefficient

AS BUILT

0.307 0.137

nZEB

0.3 0.35

2011 REGS

0.4 0.46

2008 REGS

0.6 0.69

2005 REGS 0

Folan’s wife passed away. “We lived in the rather large house, and we had a site next to it. What we aimed for was a smaller house that’s maintenance free,” he said.

The decision to focus on a low energy dwelling was, he says, a joint decision, driven in part by the fact that the previous house was anything but low energy.

“The previous house was built about 30 years ago [and] there’s a huge difference. You couldn’t compare it. As for the contemporary, modern even, styling, Folan says that it lends itself to a different mode of life. “The design is incredible: even when you’re inside, you feel like you’re sitting in the garden.”

Construction was by noted Galway-based builders GreenTec, a company with no shortage of low energy and passive house experience, as long-time readers of this magazine will attest. “Nearly all my work is passive house,” says director Niall Dolan.

Despite its modern design and commitment to environmental standards, some aspects of the house are relatively traditional. For example, rather than timber frame, Túr Uisce’s building fabric is blockwork – albeit in a single leaf, rather

28 | passivehouseplus.ie | Issue 25

1 1 0.1

0.2 0.3

0.4 0.5 0.6

0.7

0.8 0.9

1

than the more conventional cavity wall approach.

“It’s blockwork with external insulation.

The management of the build process is the main issue with houses like this: there’s a lot of detail with airtightness and so on that has to be got right. Quality control is the main thing. You have to have a full time project manager on-site all the time, so in that regard it’s unlike factory built houses,” Niall Dolan says.

With Túr Uisce, achieving the passive house standard meant taking decisions that would protect the integrity of the design without compromising the building fabric.

Dolan explains: “It’s external [insulation] because there’s a lot of cantilever and areas with no support. We were able to sit the steel on the width of the blockwork, and we could wrap the whole house in insulation. If it was all cavity it would have been impossible to deal with the cold bridging,” he says.

“Airtightness was hard enough, too, due to the engineering design. We had to get the right tapes and membranes,” says Dolan.

“I’ve been building the last 20 years. I was building a new house for myself about eight or nine years ago, in the middle of the recession, and while I was doing that I retrained myself.”

At An Spidéal, the end result has pleased all parties, and GreenTec’s expertise helped to ensure Túr Uisce was never going to be a túr aer fuar*. *tower of cold air.

CONSTRUCTION IN PROGRESS

1

2

3

4

5

1 The triple glazed windows fitted proud of the blockwork to ensure a continuous thermal layer between insulation and glazing; 2 installation of the graphite-enhanced external EPS insulation; 3 Ampack Resano vapour control membrane and airtightness layer at the base of the roof build-up; 4 the Alkorsolar is a low weight system for fixing the array of 40 Joule solar vacuum tubes onto the flat roof; 5 & top the client’s Connemara marble hearth from their former home was modified and reused in the new house.

ph+ | case study | 29

17/5410

Making buildings airtight was supposed to be hard work.

Then Blowerproof came along.

The world’s first BBA certified paint-on airtight layer, Blowerproof has been delivering passive house airtightness levels and beyond on the continent for years. Our spray applicators can even guarantee reaching passive house targets. Blowerproof can be applied internally on any wall type, and even to the outer face of masonry on the warm side of external insulation systems.

SPRAY IT

ROLL IT

BRUSH IT

BLOWERPROOF IT

www.blowerproof.ie | t: 00353 (0) 404 66111 | e: info@blowerproof.ie | CPI Foam Ltd, Unit 2c, Charvey Lane Industrial Estate, Rathnew, Co. Wicklow

30 | passivehouseplus.ie | Issue 25

It’s the most comfortable house you could possibly live in.

SELECTED PROJECT DETAILS Client: Joe Folan Architect: Helena McElmeel Architects Main contractor: GreenTec Building Mechanical engineering: Integrated Energy Structural engineer: Peter Williams / Seamus Glacken Consulting Engineers BER & airtightness test: 2eva.ie Passive house consultancy & certification: Mosart Mechanical contractor: Carrs EcoSolutions Electrical contractor: Wattpower MVHR: Brink HRV MVHR installation: Airflow Ireland External insulation system: Baumit Thermal blocks: Quinn Building Products / Foamglas Airtightness products & thermal breaks: Partel Stove: Brunner, via EcoWBS Solar thermal panels: Joule Kitchen & fitted furniture: Galworx

ph+ | case study | 31

⊲ Early bird offer ends soon

Book now for

Green Room Conference NZEB for the commercial sector

2018

2nd May 2018 The Alex Hotel

Alex Hotel Dublin • 2nd May

In association with:

igbc.ie

RE-

SOURCE

Re-Source Construction and the circular economy 21st June

BETTER HOMES

2018

Other upcoming conferences:

2018

IRISH GREEN BUILDING COUNCIL

Better Homes The future of home building 8th November

Custom Fitted Furniture & Solutions

Create a healthy environment in your house with a Brink Heat Recovery System. .................................................................. .................................................................. ....................................................

F1ee 1ee 1111 1e1ee e11ee 1ee 1e1 1eh11 11e1e1e11 1e11ge e11e�1eee 1ee1ee1eg M1eeee1eh1 A11 e1 W1e11 H11e ee1pe 1ee eee11fl111 H11�ege e111 091 7647611111111111 info@airflowireland.ie eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeeeeeeeeeeeeeee

www.airflowireland.ie 32 | passivehouseplus.ie | Issue 25

• CUSTOM CARPENTRY • KITCHENS & FITTED FURNITURE • OFFICE & STORAGE SOLUTIONS • LABORATORY INSTALLATIONS www.galworx.ie

T: 087 913 0118 E: info@galworx.ie

IN DETAIL Building type: Detached 180 sqm externally insulated concrete block house

Airtightness: 0.51 ACH at 50 Pa or 0.52m3/m2/hr at 50 Pa

Location: An Spidéal, County Galway

Thermal bridging: First course combination of Quinn Lite blocks and Perinsul HL thermal breaks, low thermal conductivity wall ties, thermally broken windows frames, 25mm Compacfoam to base of all floor-to-ceiling windows and doors.

Completion date: November 2015 Budget: €310,000 Passive house certification: Pending Space heating demand (state calculation tool, e.g. PHPP): 15 kWh/m2/yr Heat load (state calculation tool, e.g. PHPP): 9 W/m2 Primary energy demand (state calculation tool, e.g. PHPP): 91 kWh/m2/yr Heat loss form factor (state calculation tool, e.g. PHPP): Not available.

Overheating (state calculation tool, e.g.

PHPP): 2% of year above 25C BER: A2 (47.39 kWh/m2/yr) Measured energy consumption: Not available

Energy bills (measured or estimated): €250 per year (Joe Folan’s estimated annual spend on timber for his wood burning stove).

joists, fully filled with Knauf Earthwool glass and rock mineral wool. Ampack Resano membrane to underside of joists with battened service cavity and wallboard finish.

U-value: 0.068 W/m2K Zinc roof: VM Zinc Quartz on breather membrane, on 160mm Kingspan Metdeck board on vapour barrier, on ply, on 225mm x 44mm rafter with Ampack Resano vapour control and airtightness layer.

U value: 0.13 W/m2K

Ground floor: 70% GGBS concrete raft foundation insulated with 150mm Quinntherm PIR insulation. U-value: 0.115 W/m2K

Windows: Triple glazed aluminium-clad timber windows, U-value: 0.80 W/m2K. 25mm Compacfoam thermal break to base of all floor-to-ceiling windows and doors.

Walls: Baumit external wall insulation system comprising SilikonTop render finish, on 250mm / 270mm graphite expanded polystyrene boards, on 215mm concrete block-on-flat.

U-values 0.119 and 0.110 W/m2K

Heating system: Brunner HKD 2.2kW SK water heating stove supplying domestic hot water and underfloor heating and 500 litre buffer tank, plus 40 Joule solar vacuum tubes on flat roof supported on Alkorsolar system.

ROOFS First floor: Renolit Alkorplan PVC roof membrane on 200mm Xtratherm flat roof board, on Alutrix vapour control membrane, on ply deck laid to fall over 225mm x 44mm

Ventilation: Brink Renovent Excellent 400 heat recovery ventilation unit with semi-rigid ducting and manifolded air distribution system. Passive House Institute certified to have heat recovery rate of 84%.

ph+ | case study | 33

34 | passivehouseplus.ie | Issue 25

S O U T H DU B L I N PAS S I V E H O U S E

RISES OUT OF THE ORDINARY This skilfully designed new passive house in Blackrock manages to be lightfilled and strikingly contemporary while taking its design inspiration from the very ordinary Dublin street on which it sits.

Words by John Cradden

â‚Ź383

Per year (space heating & hot water)

Building type: 180 sqm timber frame passive house Budget: â‚Ź380,000 BER: A3 Standard: Certified passive house

ph+ | case study | 35

WANT TO KNOW MORE? The digital version of this magazine includes access to exclusive galleries of architectural drawings.

The digital magazine is available to subscribers on www.passive.ie

D

SOUTH ELEVATION

NORTH ELEVATION

36 | passivehouseplus.ie | Issue 25

WEST ELEVATION

EAST ELEVATION

ún Laoghaire-Rathdown will be well known by now to regular readers of Passive House Plus as the first local authority in Ireland to put the passive house standard into its planning requirements.

Although that measure was formally adopted early in 2016, architects and Blackrock residents Stephen Tierney and Nicola Haines had long before decided that their new house would be passive house certified.

“We were indeed thinking about passive earlier and for quite a while,” says Tierney.

The married couple are also partners in business, running Tierney Haines Architects together. “A lot of our clients had been asking us about it for several years, so we were keen to have the house as a kind of experiment to share with clients.

“We were also keen to achieve a fully certified passive house as it seemed to be timely and the right thing to do, and we needed to have some real experience of the [certification] process.”

The site was bought in 2015 after a search that took some ten years. “The problem was, of course, that most sites in south Dublin already have planning for as many townhouses as can be crammed on,” says Tierney. “We wanted a site with enough

space for a house and garden, but they were all too expensive because they had planning for two or three houses.”

But their patience was rewarded when they found a big site in Brookville Park with restricted, shared access. This meant that there could only ever be planning for one house, making it much more affordable.

The house they built, which also serves as the office for their firm, is rather stunning, not just in terms of its overall design but for how unobtrusively it sits amid its immediate surroundings.

The idea of the distinctive and stepped three-form shape was to make the most of the curved site in combination with planning restrictions regarding the use of local materials, height limits and the need to adhere to building lines. The angle of the shallow roof, for instance, is cleverly aligned with the dormer roofs of neighbouring houses.

The most striking single feature is the larch and Durawood timber cladding at the south-facing front. The timber louvres function both as shading and for privacy from the busy traffic junction opposite.

And even though the final result is highly contemporary and unique, it still manages

Photography: Stephen Tierney

to reference the pebble-dashed house next door.

“From an external point of view we wanted it to be a house that in some respects echoed surrounding buildings and remained quiet — particularly as you look at it from the west — and in another way had a very particular quality and its own character. We generally design quiet buildings that are connected to their local landscape.”

The decision to eschew concrete or cement in favour of twin-stud timber frame construction – with no outer leaf of masonry – as well as choosing timber cladding and cellulose [recycled newspaper] insulation, was as much to do with aesthetics and practicality as the fact that these materials have a smaller ecological footprint.

“We didn’t want to complicate the detail of the passive slab by having an outer leaf of concrete block. There is a satisfying density to the cellulose insulation and we had used it before for many years. The larch cladding is another favourite of ours and we treated it with Sioo [a high-quality wood protection] to give an even silver aging which ties it in quietly with the Durawood louvres, the concrete roof tiles, and the tone of the off white acrylic render — as quiet as possible

We generally design quiet buildings that are connected to their local landscape.

ph+ | case study | 37

SECTION 1

SECTION 2

38 | passivehouseplus.ie | Issue 25

to accentuate the planting and quality of light.”

Handily enough, Tierney Haines Architects also design gardens and the couple aimed to make the most of both the front and back garden spaces while creating a close connection between outside and inside.

The 180 square metre house has minimal circulation areas to maximise the floor space. Meanwhile, the office is at the front and can be reasonably well isolated from the family activity at the back of the house.

There is also a double height hall, sitting room and upstairs landing, while one of the bedrooms has a mezzanine level, and all take advantage of the house’s southerly orientation.

Passive house consultant on the project, Andrew Lundberg of Passivate, particularly likes the double height space. “I mentioned to Stephen and Nicola once during the process that the use of double height spaces is a compromise on efficiency, as it’s floor area that could otherwise be used.

“However it was clear that this was an important part of the design that wasn’t going to go away, and in the overall context of the house nothing extraordinary had to be done to compensate for it.

SECTION 2

“As it’s fully glazed it gets a lot of sun, but is essentially isolated from the main part of the building so it’s just a nice space to sit in that actually has a very different feel to the rest of the house, and that’s actually very uncommon in passive houses where temperatures are normally very consistent all around.”

The house also breaks new ground in that it may be the first certified passive house to use Vaventis Fresh-r ventilation systems (the house has two). These are decentralised heat recovery ventilation (HRdV) units that are installed in specific rooms, unlike traditional centralised systems which have one ventilation unit and a duct network running throughout the house.

The unit serving downstairs is situated in the main living space and TV room, while the unit serving upstairs is in the (downstairs) utility room, with a short duct run from here to the upstairs bathrooms, and another duct run to the adjacent ground floor bathroom and office.

Incoming fresh air enters through the warm utility room, and Tierney says the constant movement of warm air here dries clothes quickly. Doors between rooms are also left open at night to help ventilate the bedrooms.

The advantage of an end of terrace site is that we have a lot of open sky.

S

FIRST FLOOR PLAN

GROUND FLOOR PLAN

ph+ | case study | 39

ADV640IE-A4

DELIVERING VENTILATION THAT WORKS.

AERECO, SECURING INDOOR AIR QUALITY FOR OVER 30 YEARS Ventilation that secures good indoor air quality while being energy efficient?

That’s quiet and reliable? Ventilation that has the capacity to respond to changes in its environment? Ventilation that works?

This is the goal of Aereco. It’s the basis on which Demand Controlled Ventilation (DCV) was founded. And it’s the principle behind the Aereco Quality Standard.

The Aereco Quality Standard is more than just superlatives and marketing. It’s a process that practically engages the supply chain and secures the installed performance of the system.

40more | passivehouseplus.ie | Issue 25 For information: www.aereco.ie

The Aereco Quality Standard includes: • • • •

Free ventilation design and advice Certified Partners Free commissioning of systems Free Aereco Quality Standard commissioning certificate • Free ancillary certification under BCAR • Free filter replacement • Free extension of the warranty to 5 years.

ph+ | case study air | 40 on

demand

The two Vaventis units are capable of delivering 20 to 65 m3/hr of fresh air each – and for this 180 sqm house three units would ordinarily be recommended, especially given the fact the building also includes the Tierney Haines office, where Tierney and Haines work during the day along with two colleagues.

“We designed the office to have cross ventilation,” says Tierney. “We put in a little vent window – 400mm by 300mm – near the front door. That gives a little cross ventilation across the desk when you need it. If there are three or four in there, that window might be ajar for half a day.”

In the summer, for cooling purposes, the high-level window in the hallway helps to provide a stack effect, in addition to the remote controlled Velux roof-windows.

In addition, the louvred window in the downstairs toilet tends to be left open in the summer, and the stack effect from the landing roof-window helps to draw cool air from here around the ground floor.

Tierney also points out that the super-insulated structure provides excellent acoustic insulation from the traffic outside. “It is many people’s first comment on entering – how quiet it is,” he says.

Tierney and Haines have been living in the house for a year now and are delighted.

“We like the light most and how there is a different atmosphere at every time of the day. The advantage of an end of terrace site is that we have a lot of open sky giving us a very bright site.”

He says that he and Haines “constantly delight” in the steady temperatures of 20-21C downstairs and 18-19C in the bedrooms, adding: “The steadiness of it is one of the biggest joys, no warm times and cold times, no cold spots or warm rooms, it means we lead a more open plan existence, open doors, enjoying the full volume of the spaces.”

ph+ | case study | 41

NEW FREE CPD SEMINARS

SINGLE LEAF MASONRY A MODERN METHOD OF CONSTRUCTION? Book now at quinn-buildingproducts.com/CPD

42 | passivehouseplus.ie | Issue 25

What does the data say on IAQ and energy use?

Data logging from the two Fresh-r units shown to Passive House Plus – both of which log CO2, humidity, (indoor, outdoor and supply) temperatures and flow rate – indicate that the building is performing well. Indoor temperatures rarely creep above 25C in the summer, while winter temperatures tick over at between 18-20C (for the unit serving bedrooms) and 20-22C (for the unit serving the main living area).

Indoor air quality levels look similarly consistent. CO2 levels are notably lower in the warmer months due to the added impact of window opening, typically ranging from 400 to 700ppm, with the unit that serves upstairs peaking as the family rises in the morning. As the house closes up in the winter months, CO2 levels raise, but seldom go above 1,000ppm. Passive House Plus queried one December event when night-time levels in the living area spiked at over 1,600ppm and temperatures rose to 23.5C. “We had a party with 25 people here,” says Tierney, checking his diary. “Obviously after a while you open a few windows.”

With constant access to the wifi-connected units performance data, Tierney says it’s possible to glean remarkably detailed information on occupancy patterns. “The

Fresh-r HRV monitoring is extremely sensitive and even allows us to see if one of our boys got up during the night to go downstairs and check their phones for social media updates.”

As for primary energy, when the electricity factor is adjusted to be consistent with PHPP, the total metered primary energy use is uncannily close to the levels predicted in PHPP – the building used 107 kWh/m2/ yr in its first year, just over 1 kWh higher than PHPP predicted (though the real figure would be just 91 kWh/m2/yr, based on the current Irish electricity conversion factor).

While at first glance the gas and electricity bills of €383 and €1,005 respectively appear higher than the incredibly low figures posted for some buildings covered in Passive House Plus, there are mitigating circumstances, notwithstanding extra energy use in the first year due to the building drying out and the occupants learning how to run the building. And the occupancy is high, given the building’s dual role as a five-person family home and a four-person office. The office computer use alone is estimated at over 1,000 kWh/ yr, representing roughly €150 worth of electricity per year.

ph+ | case study | 43

Insulating for a Lifetime

Explore the Benefits of KORE Expanded Polystyrene Perfect for low energy buildings, KORE offers Expanded Polystyrene in a range of solutions for wall insulation applications, including cavity wall insulation, external wall insulation and internal wall dry lining

Energy efficiency starts with the foundation. Offering an insulated foundation system and a range of solutions for floor insulation applications, we can help you achieve ground floor U-values as low as 0.08W/m2K

44 | passivehouseplus.ie | Issue 25

www.kore-system.com info@koresystem.com +(353) 49 433 6998

CONSTRUCTION IN PROGRESS

1

2

3

4

5

6

Explained: Stack effect: The movement of air in and out of buildings due to differences in the temperature or moisture content of air. For example, the opening of high-level windows can allow warm air to rise out of a building, creating a ‘stack’ or ‘chimney’ effect that pulls cooler outdoor air in through open windows down below, helping to provide ventilation.

1 The passive slab foundation features 100mm concrete raft/screed over 300mm of Kore EPS 100 insulation; 2 walls are twin-stud timber frame incorporating 300mm of Ecocel cellulose insulation; 3 windows fitted into place, sealed with airtightness tapes; 4 Alfa Rufol Varia vapour control layer in place, with holes for Ecocel insulation visible; 5 the holes are then carefully sealed up and taped over once the insulation is installed; 6 a Hitchcockian view down the under-construction timber steps from first floor to ground floor.

SELECTED PROJECT DETAILS Architect: Tierney Haines Architects Passive house consultant: Passivate Engineering: Tim Kelly Consulting Engineers Passive house certifier: Passive House Academy Airtightness testing: Hession Energy Main contractor: Smartbuild Mechanical contractor: B Warm Cellulose insulation: Ecocel Floor insulation: KORE Windows & doors: True Windows Roof windows: Velux Timber frame: Doherty Timber Frame OSB: SmartPly Airtightness products: Alfa, via Proline Architectural Hardware Condensing boiler: Wolf Decentralised heat recovery ventilation: Vaventis Timber cladding: Machined Timber Specialists Limestone flooring: Kilkenny Limestone Roof tiles: Blue Bangor

ph+ | case study | 45

Email info@hessionenergy.ie or call 089 700 8222

WWW.HESSIONENERGY.IE

Hession Energy are independent energy consultants who can help you to achieve the lowest energy home possible by tackling tricky airtightness and building fabric details, sta both at the design stage and once your project is on site.

Delivering Pre -Designed intelligent Homes Pre-designed and bespoke 2-4 bedroom homes

Rapid build completed in 10-14 weeks

Minimal heating bills

Super insulated

T: 353 (0)21 486 8155 E: info@glavloc.ie www.glavloc.ie 46 | passivehouseplus.ie | Issue 25

IN DETAIL Building type: Detached 180 sqm timber frame four-bedroom family home and office.

Location: Brookville Park, Blackrock, Co Dublin Completion date: November 2016 Budget: €380,000 Passive house certification: Certified passive house classic Space heating demand (PHPP): 11 kWh/m2/yr Heat load (PHPP): 10 W/m2 Primary energy demand (PHPP): 105.83 kWh/m2/yr Heat loss form factor (PHPP): 2.408

for gas.

Measured delivered energy consumption: 4,933 kWh/yr (metred gas use), 5,141 kWh/yr (metered electricity use).

Measured primary energy consumption: 107 kWh/m2/yr Airtightness: 0.56 ACH at 50 Pa Thermal bridging: Passive slab used which connected well with a twin-stud timber wall.

The twin-stud timber frame meant that there was optimal reduction of thermal bridging at joints. In addition, a 50mm insulated service cavity was used internally.

Ground floor: 100mm concrete raft/screed over 300mm of Kore EPS 100 insulation.

U-value: 0.117 W/m2K

BER: A3 (58.06 kWh/m2/yr)

Walls: 20mm larch cladding externally, followed inside by cavity, breather membrane, OSB, double-stud timber frame incorporating 300mm of Ecocel cellulose insulation, SmartPly OSB, Alfa Rufol Varia vapour control layer, 50mm insulated service cavity, plasterboard internally. U-value: 0.11 W/m2K

Energy bills (including all taxes and charges): €1,005 per year for electricity, €383 per year

Roof: Sandtoft Standard Pattern Brown concrete roof tiles on battens and

Overheating (PHPP): 0.38% Energy performance coefficient (EPC): 0.374 Carbon performance coefficient (CPC): 0.337

counter battens, followed underneath by breather membrane, double joist structure incorporating 350mm Ecocel cellulose insulation, Alfa Rufol Varia VCL, 50mm insulated service cavity, plasterboard.

U-value: 0.1 W/m2K Windows: True Windows IV98HPL aluclad timber windows, featuring Saint-Gobain Planitherm XN triple glazing. Ug-value: 0.54 W/m2K. Uf value: 0.99 W/m2K. G-value: 54%.

Roof windows: 3 x Velux GPU 0066 triple glazed roof windows. Uw-value: 0.82 W/m2K Heating system: Wolf FGB-28 [92% efficient] gas boiler, 300 litre cylinder, heating through underfloor heating pipes to ground floor only.

Ventilation: 2 x Vaventis Fresh-r decentralised MVHR units. Passive House Institute certified at 78% efficient.

Electricity: No photovoltaic at present but planned for the future.

Green materials: Ecocel cellulose insulation, timber frame, FSC certified cladding (Durawood louvres treated with Sioo:x and untreated Siberian larch).

ph+ | case study | 47

ÂŁ115 Profit

Energy bill: all heating & electricity (including solar feed-in tariff)

48 | passivehouseplus.ie | Issue 25

Building type: Two-storey load-bearing straw bale house Location: Onehouse, Suffolk Completed: September 2015 Standard: Passive house classic certified

ALL BALES,

NO BILLS In the classic story of the three little pigs, the big bad wolf may have blown down the first little piggy’s house of straw with consummate ease — but he wasn’t reckoning with this pioneering, energy bill-shredding Suffolk project, the UK’s first load-bearing straw bale passive house.

Words by David W Smith

ph+ | case study | 49

Notes Work to figured dimensions when shown. All dimensions to be checked on site prior to commencement of any works, and refer any discrepancies to the architect.

This drawing is to be read in conjunction with all relevant design team specification and drawings.

SUPERSTRUCTURE TENDER

6.500 apex curved beam 6.050 u/s curved beam

DETAIL A 202

2082

6 compressed bales @ 347 mm each

2.796 deck level

6050mm radius

2429

7 compressed bales @ 347 mm each

3.346 top box beam

2429

DETAIL A 209

7 compressed bales @ 347 mm each

5.164 top box beam

DETAIL A 201

+55.050 0.000 Slab

At that point, I had to become a super apprentice of everything: carpentry, plumbing and electrics.

Notes Work to figured dimensions when shown. All dimensions to be checked on site prior to commencement of any works, and refer any discrepancies to the architect.

This drawing is to be read in conjunction with all relevant design team specification and drawings.

SUPERSTRUCTURE TENDER Rev Q Rev P Rev N Rev M Rev L Rev K Rev J Rev I Rev H Rev G Rev F Rev E

6/2/14 13/1/14 10/1/14 19/12/13 4/10/13 25/9/13 20/9/13 12/9/13 12/8/13 19/6/13 17/6/13 8/4/13

AG AG AG AG AD AD AD AD AD AD AD AD

Strawbale coursing added Superstructure tender issue FINAL Superstructure tender issue Updated for tender Superstructure client issue Amend land drain Amend land drain Amend external slab level and land drain Construction issue Substructure tender issue FINAL Substructure tender issue Add dims

6.500 apex curved beam 0 6.050 u/s curved1 beam

DETAIL A 202

2

AG AG AG AG AG AG AG AG

3 metres

SECTION AA Proposed Dwelling, Onehouse, Suffolk Scale 1:25 @ A1beam 1:50 @ A3 5.164 top box

Date Aug 2012 Drawing no. 12 / 342 | L | 108 / Q 5 Parliament Square, Hertford SG14 1EX

6 compressed bales @ 347 mm each

contact@goodarchitecture.co.uk www.goodarchitecture.co.uk

DETAIL A 205 2.796 deck level

IC

DETAIL A 201

6050mm radius

2429

7 compressed bales @ 347 mm each

2082

T: +44 (0)1992 501073 F: +44 (0)1992 584001

Good Architecture

+55.050 0.000 Slab

Notes Work to figured dimensions when shown. All dimensions to be checked on site prior to commencement of any works, and refer any discrepancies to the architect.

This drawing is to be read in conjunction with all relevant design team specification and drawings.

SUPERSTRUCTURE TENDER Rev P Rev N Rev M Rev K Rev J Rev I Rev H Rev G Rev F Rev E Rev D Rev C Rev B Rev A

DETAIL A 213 6.500 apex curved beam

6/2/14 14/1/14 10/1/14 4/10/13 12/9/13 12/8/13 19/6/13 17/6/13 19/3/13 19/3/13 14/3/13 11/3/13 5/12/12 20/11/12

Strawbale coursing added Superstructure tender issue FINAL Superstructure tender issue Superstructure client issue Amend external slab level and land drain Construction issue Substructure tender issue FINAL Substructure tender issue Issue Substructure tender issue Client issue Issue Add details notation; amend constrcution detail generally Construction detail

0

6.050 u/s curved beam

1

2

AG AG AG AD AD AD AD AD AD AD AD AD AD AD

AG AG AG AG AG AG AG AG AG AG AG

3 metres

SECTION CC

DETAIL A 207

Proposed Dwelling, Onehouse, Suffolk Scale 1:25 @ A1 1:50 @ A3 Date Aug 2012 Drawing no. 12 / 342 | L | 110 / P

5.164 top box beam

5 Parliament Square, Hertford SG14 1EX

2082

6 compressed bales @ 347 mm each

T: +44 (0)1992 501073 F: +44 (0)1992 584001

Good Architecture

DETAIL A 203

contact@goodarchitecture.co.uk www.goodarchitecture.co.uk

DETAIL A 220

DETAIL A 222

2429

7 compressed bales @ 347 mm each

2.796 deck level

+55.050 0.000 Slab

DETAIL A 201

DETAIL A 221

Rev L Rev K Rev J Rev I Rev H Rev G Rev F Rev E Rev D Rev C Rev B

6/2/14 13/1/14 10/1/14 4/10/13 12/9/13 12/8/13 19/6/13 17/6/13 19/3/13 19/3/13 14/3/13

AG AG AG AD AD AD AD AD AD AD AD

Strawbale coursing added Superstructure tender issue FINAL Superstructure tender issue Superstructure client issue Amend external slab level and land drain Construction issue Substructure tender issue FINAL Substructure tender issue Issue Substructure tender issue Client issue

0

1

2

AG AG AG AG AG AG AG AG

3 metres

SECTION DD Proposed Dwelling, Onehouse, Suffolk Scale 1:25 @ A1 1:50 @ A3 Date Aug 2012 Drawing no. 12 / 342 | L | 111 / L 5 Parliament Square, Hertford SG14 1EX T: +44 (0)1992 501073 F: +44 (0)1992 584001

Good Architecture

50 | passivehouseplus.ie | Issue 25

contact@goodarchitecture.co.uk www.goodarchitecture.co.uk

D

ave Howorth puts his decision to self-build the UK’s first load-bearing straw bale passive house down to “a moment of madness”. His original intentions had been less ambitious: he had just wanted to satisfy his green instincts by adding a few photovoltaic panels to his old house in Hitchin, Hertfordshire.

But he ended up in a challenging self-build project that required him to learn straw bale construction, defeat planning objectors, and then acquire the skills of a carpenter, an electrician and a plumber on the job.

Meanwhile, the structural engineer faced challenges of his own, partly because of the lack of information available about passive houses, but mainly because the curved roof presented technical difficulties.

So when Dave and his wife Mabel eventually moved into Haven Cottage, in the Suffolk village of Onehouse, in June 2015, it was the culmination of a dream that had taken six years to fulfil. Howorth first became interested in straw bale building back in 2009 when he took a course with the UK’s leading expert, Barbara Jones, in Lincolnshire, and visited several straw bale buildings around the UK. The couple then spent three years hunting for a suitable site before finding the Suffolk

WANT TO KNOW MORE? The digital version of this magazine includes access to exclusive galleries of architectural drawings.

The digital magazine is available to subscribers on www.passive.ie

plot in 2012. Even then, it was not a straightforward matter to go ahead and build the house they wanted. Planning permission was opposed by the parish council, and it took a further three years to design and self-build the house.

Despite the long gestation, Howorth says it was worth it. The house has achieved passive house certification, and is quiet and warm within, he says. The couple appreciate the natural feel and low heating bills. “I love the simplicity and economy of straw bale building and the DIY element of the build. I’d do it all over again,” he says.

Howorth’s interest in straw bale building was sparked when he read about the ideas of Barbara Jones, whose Straw Works consultancy offers practical courses in straw bale building. Groups of volunteers turn up at a self-build site and help the owner install the bales while Jones, or another qualified tutor, supervises the work.

Equipped with their new skills, the volunteers then go off to carry out their own self-builds. Having attended one of Photography: Agnese Sanvito

the Barbara Jones courses in 2009, Howorth became part of the straw bale building community and knew he would be able to call on volunteers to help construct his house when the moment came.

The couple bought their plot with planning permission attached in March 2012, but the existing architectural plans were unsuitable. So they asked Andrew Goodman of Hertfordshire-based Good Architecture to provide a new design for a four-bed passive house using 450mm thick compacted bales.

“The site had permission for an unimaginative chalet bungalow, but it wouldn’t have achieved the passive house standard and didn’t lend itself to straw bale construction,” says Goodman. “We created a completely different two-storey design with a curved ‘Dutch Barn’ style roof in keeping with the Suffolk vernacular.”

Architectural assistant Abbie Davies did a lot of the initial design work while studying sustainable architecture at the Centre for Alternative Technology in Wales. Davies argued that the straw bales could be used

I love the simplicity and economy of straw bale building and the DIY element of the build. I’d do it all over again.

ph+ | case study | 51

CONSTRUCTION IN PROGRESS

1

2

3

4

5

6

7

8

9

1 Installation of mineral wool full-fill cavity insulation to the insulated box beam; 2 the KORE passive reinforced concrete raft foundation; 3 the walls consist of 450mm loadbearing straw bale; 4 erection of the straw bale ground floor walls under way; 5 hazel stakes were hammered into the straw bales to secure them in place, and a timber box beam was laid on top of the ground floor wall before installation of the first floor; 6, 7 & 8 a curved ‘Dutch Barn’ style roof was chosen, in keeping with the Suffolk vernacular, though this design proved a structural engineering challenge because of the forces exerted onto the straw bale walls; 9 a horizontal beam supports the curved roof structure and internal walls were finished with a 25mm lime plaster.

for conventional load-bearing (see ‘How the straw bale walls were built’).

“We designed it so all the external walls and roof could be built, then plastered on the inside,” says Goodman. “We could then do an initial air test before the internal partitions were constructed. That way we could see if there were any holes in the walls and repair them. But as it turns out there weren’t any.”

The uniqueness of the project provided technical challenges for superstructure engineer Paul Rose, who was brought in because he had previously worked on three straw bale load-bearing houses. At the time, he wasn’t even aware that Dave and Mabel wanted to achieve the passive house standard.

“One of the biggest issues with straw bale is the lack of information available,”

52 | passivehouseplus.ie | Issue 25

Rose says. “But we’ve done a few now and learned on the job. A bigger challenge with this project was the curved roof. We had to make sure the lateral forces at eaves level weren’t so great that they pushed the straw bales over.

“The roof had to be stiff enough so the arched members didn’t push sideways to any great degree and push the walls over.

I’ve only designed two or three roofs like that in my career,” he says, adding that “the fact it was straw bale made it tricky and interesting”. One of Rose’s solutions involved adding a horizontal beam to support the curved beams that create the roof.

The initial conceptual designs were completed in November 2012 and submitted for planning permission, which was opposed by Onehouse Parish Council,

who argued because the home was next to a Grade-II listed cottage, its contemporary design was “totally out of keeping with the character and the appearance of the area”.

Fortunately for Dave and Mabel, Mid-Suffolk’s conservation officer said it would not have any significant harmful impact, and planning permission was granted.

The architects were then able to get to work on more detailed designs, which were completed in stages between August 2013 and January 2014. “Although the design is quite contemporary, finishing straw bale in lime render is ideal in relation to nearby listed buildings,” says Goodman. “We haven’t used straw in the roof, but we have in the walls. We drew elevations in nice straight lines with plumb corners, but it’s all fairly wobbly [looking] because it follows where the bales go. So whilst the design is quite contemporary in some respects, it’s softened by the straw bale element.”

Irish company Tanner Structural Designs took care of engineering the foundations, using the Irish-made Kore passive slab insulated foundation with external ring beam and internal ribs. Builders laid the foundations, and built the garage, in late 2013. “Hilliard Tanner worked out a way of creating a base plate on top of the concrete ring beam that the straw bale builds off. It’s a good solution in terms of transferring loads down into the foundations,” says Goodman.

Finally, at the end of March 2014, volunteers arrived at Dave and Mabel’s plot of land for another Barbara Jones course and work began to construct the straw bale walls. Dave took a year’s sabbatical to work full-time on the project. Volunteers came from far and wide, including France and Sweden. The tutor was Jakub Wihan, who teaches straw bale construction for Straw Works from his base in Todmorden, West Yorkshire.

“The course lasted two weeks and we built the ground floor walls. After a gap of a few weeks Barbara Jones sent more people to help out and we got most of the first floor built. But after a month all the volunteers went home and I was the project manager,” Howorth says.

“At that point, I had to become a super apprentice of everything: carpentry, plumbing and electrics. I did have little bits of knowledge from working in a repair shop at school and doing woodwork at school and bits of DIY. But this was on another level.”

Airtightness tests revealed a final figure of 0.42 air changes per hour, well inside the passive house standard of 0.6. However, initial tests had been even more impressive.

“The initial figure was 0.29 but something happened before the building was finished.

When it was depressurised the readings were fine, but when it was pressurised to get an average of the two figures, there was a leak allowing air to escape inside to out, but it wasn’t pulling it in from outside to in. But it was impossible to locate it,” says Goodman.

The house has no central heating system, as such. Space heating is all provided directly

How the straw bale walls were built Here’s how Dave Howorth and his team constructed the straw bale walls at Haven Cottage. First, the full ground floor walls were built by stacking straw bales onto timber stakes, and then a U-shaped timber beam was laid on top of the wall.

Next, fencing wire was wrapped vertically around the walls at intervals of every two to three metres and mechanically tightened.

Several restraint straps were then attached at the top and bottom of the wall on one section (about five strap positions were used in total) and tightened as hard as possible, compressing the bales. Then the straps were taken and moved to the next part of the wall, and the whole process repeated. After going the whole way round the ground floor wall and

checking everything was still tight, the wall was declared ‘compressed’, the U-shaped beam was completed (turning it into a box beam) and work could begin on the first floor using the same process.

Eventually, just before rendering began, the fencing wires were cut out, having served their purpose. The straw was fully compressed and would not rebound.

Alternative methods of compression are sometimes used, such as placing tonne bags of sand on top of the wall, or using car jacks to force the tops of the bales down. “Fencing wire seemed like the easiest technique in our situation,” says Howorth. “The compression ensures that there are no gaps in the wall or within the straw, thus ensuring both structural and thermal effectiveness.”

ph+ | case study | 53

• High performance cement based self-compacting liquid screed • Can be installed quickly, up to 1000m2 per day • Reduced drying times compared to gypsum based screeds, can be foot trafficked in 24-48 hours saving time • Exceptional thermal conductivity of up to 2.9W/mk • Certified to BSEN13813 and CE marked • Floor coverings can be applied directly on to Cemfloor • No need for surface sanding as no lattience unlike gypsum screeds • Compatible with all cement based tile adhesives and floor levellers (Tiling can potentially be done after 5 days on a non-heated floor) • Only installed by fully approved and trained applicators to BS 8204 • Can be polished as a finished floor on residential.

See website for your local Distributor

www.cemfloor.ie T: 094 95 53900 E: info@cemfloor.co.uk

Clean, fresh air for everyone Flynn Heat Recovery Systems is dedicated to supplying the very best Heat Recovery Ventilation Systems to the Irish market from around the globe in an effort to improve the indoor air and sound quality in buildings.

We bring the manufacturer direct to you.

TIMBER FRAME I.S. 440:2009 Registration No.

NSAI Certified

www.fsc.org

The mark of responsible forestry

Tel: 057 93 36999 E: maurice@flynnheatrecovery.com 54 | passivehouseplus.ie | Issue 25

ph+ | case study | 54

CONSTRUCTION IN PROGRESS

1

2

3

by electrical heaters. There is a post-heater in the ventilation system, which heats up incoming fresh air, plus three radiant heaters fixed to walls inside the house (two in bathrooms, one in the downstairs hall).

The basic heating strategy in winter is to use the post-heater, and the radiant heater in the hall, to bring the temperature up to 21C overnight — this is enough to ensure it then doesn’t drop below 20C during the day.

Domestic hot water is stored in a Gledhill thermal store, which is basically a big, highly insulated bucket containing 250 litres of water. The water in the bucket is heated by two immersion heaters.

The bottom immersion – at the base of the tank – is connected to a solar diverter that takes spare power from the huge 27 square metre solar PV system whenever it is available. This is the main method of heating water. “It’s the only method we use during summer and is used part of the time in winter. The immersion’s thermostat is set to 95C to capture as much solar energy as possible and store it as hot water,” Howorth says.

Meanwhile, the top immersion – half-way up the tank – is connected to a time switch and its thermostat is set to 60C. This immersion is used as a backup to the solar power, which is why its thermostat is set lower. During winter the time-switch is set to come on for two hours during the night to provide enough hot water for the following day. If required, the immersion can also be switched on at any time for an hour by pressing the boost button on the time-switch.

At the beginning of March 2018, vicious snowstorms swept across the UK and Ireland from the east. When Passive House Plus contacted Dave Howorth to ask how the house was performing at the time, he

simply said that it “just behaves as it is supposed to” — and that the temperature inside was just over 20C. He said that, in general, it was difficult to describe how the house performs. There’s not really much to say. He elaborated: “That is, [the] passive house windows keep the drafts and noise out. Passive house walls and windows, and roof and floor, keep the temperature stable so we just sit and look at it snowing outside.

“In summer we sit and look at the sun on the fields.”

SELECTED PROJECT DETAILS Clients: Dave & Mabel Howorth Architect: Good Architecture Structural engineer: Rose Consulting Engineers Passive slab engineer: Tanner Structural Designs Timber roof design: Cullen Timber Design Passive house certifier: Warm Low Energy Building Practice Airtightness tester: Paul Jennings (formerly of Aldas) Straw bale construction: Straw Works Aluminium roofing: EFL - Specialist Roofing Contractors Roof insulation: Warmcel, installed by Payne Insulation Floor joists: Easi-joists, via Holden Timber Engineering Insulated foundations: Kore Windows & doors: Livingwood MVHR: Brink, via Passivhaus Store Thermal store: Gledhill PV: Sunmodule

4

5 1 Plywood boxes ensure accurate positioning of the windows; 2 the windows being fitted into place; 3 the window sitting within the insulating straw-bale layer; 4 airtightness detailing around window junctions minimises drafts and improves acoustic performance; 5 the windows are Livingwood tilt & turn triple glazed alu-clad redwood units; 6 the design had to respect the context, which included neighbouring thatched cottages.

6

ph+ | case study | 55

• U-Value Calculations

• Free Design Review Service

• Thermal Bridging • Insulation & Airtightness Analysis training at our Centre of • CPD Presentations Knowledge • Specification Clauses Delivering quality products with full technical support for diffusion open buildings

• Hygro-thermal Modelling – WUFI

T 046 9432104 info@ecologicalbuildingsystems.com www.ecologicalbuildingsystems.com

Breathe easy with Brink Mechanical Ventilation with Heat Recovery Systems are SAP Appendix Q listed, PHI certified and available in a range of capacities from 180-400m3/h.

Ideal for new and retrofit installations, Brink’s self-balancing systems create happier, healthier and more comfortable homes. Specify Brink and you can...

Say goodbye to...

Say hello to...

• • • •

• • • • •

Mould, mildew and condensation Stale, foul, unpleasant, humid air Musty and unpleasant odours High humidity levels

Warm, freshly filtered air Reduced asthma, hay fever and allergy triggers Fewer drafts Lower energy bills and emissions Guaranteed, Dutch quality

Brink systems are also fully compatible with Ubbink’s Air Excellent air distribution systems. Air Excellent’s clever, push-together connection system combines unsurpassed ease of installation, with incredible levels of airtightness.

To find out more, visit us online at www.brinkhrv.com, e-mail info@iakonline.com or call us on +353(0)57 912 4017.

Ian A. Kernohan Limited Fir Trees, Conlig, Co. Down, Northern Ireland, BT23 7SU Birr Technology Centre, Birr, Co. Offaly, Ireland, R42 HX39 E: info@iakonline.com W: www.iakonline.com

56 | passivehouseplus.ie | Issue 25

IN DETAIL Building type: Two-storey detached straw bale dwelling, 148.3 sqm TFA with single-storey conservatory outside thermal envelope.

Passive house certification: Certified PH Classic (PHPP 9 PER Assessment) Space heating demand (PHPP): 14 kWh/m2/yr Heat load (PHPP): 10 W/m2 Primary Energy Renewable (PHPP): 63 kWh/m2/yr Environmental assessment method: N/A Airtightness (at 50 Pascals): 0.42 ACH or 0.47m3/hr/m2 Energy performance certificate (EPC): C78 Overheating (PHPP): 6% Heat loss form factor: 3.22 Measured energy consumption: Electricity meter readings show the house consumes on average 4,622 kWh per year, while generating on average 3,956 kWh per year from its solar PV array.

Energy bills: Based on Dave & Mabel’s average annual consumption of 2,365 kWh (day) and 2,256 kWh (night) and Powershop’s Shop for Powerpack’s tariffs of 12.4p and 7.1p respectively (as per switch.which.co.uk), the estimated average annual total energy bill works out at £512, including VAT and standing charges. According to PHPP, the house is estimated to consume 2,082 kWh per year for space heating, and because Dave & Mabel only run their electric space heaters at night (ie using night rate electricity of 7.1p), this would yield an estimated annual space heating bill of £160. (However, the house may be using far less space

heating than PHPP assumes, as the total night time consumption is only marginally higher than the PHPP estimate for space heating). In 2017, Dave and Mabel received a feed-in-tariff of £627 for generating solar power in that year. Subtracting this from the calculated annual energy bill of £512 gives a net profit of £115.

Thermal bridging: ACDs not used.

Foundations: no thermal bridging through use of minimum 100mm EPS formwork to concrete ring beam; first floor: metal web joists are not built into thermal envelope; gable walls: thermally-broken double stud construction; curved roof: thermally-broken double joist construction; window/external door jambs and heads: wood fibre insulated external reveals (for lime render finish).

Ground floor: KORE passive reinforced concrete raft foundation, with external ring beam and internal ribs, on 400mm EPS insulation, on 50mm sand blinding, on 550 to 750mm compacted blast furnace slag subbase. U-value: 0.081 W/m2K Walls: 450mm nominal loadbearing straw bale, finished with 25mm nominal lime render externally and 25mm nominal lime plaster internally. Insulated box beams at first floor level and eaves level made up from timber joists and noggins, 18mm OSB flanges and full-fill mineral wool insulation.

U-value: 0.114 W/m2K Gable panels above box beams: 100 x 50mm double timber stud construction, finished with 25mm nominal lime render externally with mesh reinforcement on 25mm wood wool board, and 25mm nominal lime plaster internally with mesh reinforcement on 15mm wood wool board. Insulation: 410mm wide cavity injected with Warmcel.

U-value: 0.100 W/m2K Curved roof: Natural embossed aluminium

standing seam sheeting on pro clima Solitex UM Connect underlay, on 2 x layers 9mm plywood, on 150 x 50mm timber joists, on 300 x 75mm curved glulam beams.

360 x 100mm glulam ridge beam. Ceiling construction: Gypsum plaster finish at bottom, on 9.5mm plasterboard, on Intello Plus airtightness membrane, on 6mm hardboard sheathing to underside of 150 x 50mm timber ceiling joists between curved glulam beams. Insulation: 450mm deep cavity injected with Warmcel. U-value: 0.095 W/m2K Windows: Livingwood tilt & turn triple glazed alu-clad redwood windows, lift & slide door and entrance doors, with argon filled glazing.

Overall U-value: 1.00 W/m2K Heating system: Direct electric space heating: 1.8 kW MVHR post heater (bought directly from Veab) and 1.8 kW radiant heater to downstairs hall, both only run at night on Economy 7 tariff. Two x 1.2 kW Stiebel Eltron radiant heaters in two of the three bathrooms, used for comfort when showering.

Domestic Hot Water: Immersion heaters in 250 litre Gledhill Torrent Greenheat thermal store (as per detail in article).

Ventilation: Brink Renovent Excellent 300 heat recovery ventilation system with supply and extract plenums and radial ductwork; Passive House Institute certified to have heat recovery rate of 84%.

Electricity: 27 square metre Sunmodule Plus SW 250 mono black solar photovoltaic array with average annual output of ?? kW; Enphase M215 Microinverter.

Green materials: Compacted subbase used blast-furnace slag, a byproduct from steel manufacturing; straw bales supplied from an Essex farm; Warmcel recycled newspaper cellulose fibre insulation.

ph+ | case study | 57

SLOPE &

G LO RY When architect Tony Godwin wandered into a seminar on the passive house standard at Ecobuild ten years ago, it was the start of a journey that would eventually see him design and build his own passive home on a sloping site — and learn some hard lessons along the way to achieving a comfortable, ultra-low energy family home with tiny energy bills.

Words by Tony Godwin

WANT TO KNOW MORE? The digital version of this magazine includes access to exclusive galleries of architectural drawings.

The digital magazine is available to subscribers on www.passive.ie

58 | passivehouseplus.ie | Issue 25

ÂŁ250

Per year (all heating & electricity minus renewable energy income)

Building type: 221 sqm detached two-storey timber frame house Location: Whitwell, Oakham, Rutland, UK Budget: ÂŁ508,000 Standard: Certified passive house

ph+ | case study | 59

R

A teenager in a small room with an Xbox doesn’t need further heating either.

60 | passivehouseplus.ie | Issue 25

elocating from London to Rutland, my wife Marlen and I quickly realised that all the properties on offer would require either considerable compromise on our aspirations for a low energy sustainable lifestyle, or else radical alteration, adding considerable cost to the initial purchase price. So arose my wife’s suggestion that we self-build.

Foreseeing a sentence of several years hard labour, I suggested sites would be difficult to come by. Undeterred, her internet search found four sites within four miles of our son’s school, and so the fuse was lit.

Our brief was for a home with a minimum of three bedrooms for the family, an additional bedroom and bathroom to host parents or guests separate from the family accommodation, and a working space (as we both work from home). We wanted contemporary spaces that would be inspiring to inhabit, and we wanted to aim for the highest standards of energy efficiency and sustainability practical.

I first encountered the passive house concept at Ecobuild 2008, attending a seminar with Bere Architects. I arrived late as passive house expert Sarah Lewis took attendees through a lot of data sheets – and I left after 10 minutes thinking ‘this is too difficult’!

We purchased our site in December 2009 and planning permission was granted the following May. The passive house option was kept on the table, and a brief email exchange with the BRE indicated that the standard was achievable for our design.

Later in 2010, a visit to Bere Architects’ Ranulf Road passive house, followed by a seminar with Professor Helmut Krapmeier, persuaded me to make the passive house standard the core requirement for our new house.

Disappointment followed as the first calculations in the passive house design software PHPP predicted a heating demand of 22 kWh/m2/year — well outside the passive house standard of 15 — because the proposed T-shape with single-storey projections resulted in a poor form factor.

There was also a large proportion of glazing to the northerly aspect. These factors were compounded by the East Midlands climate zone, which has one of the longest heating seasons in the UK. So our passive house advisors WARM suggested reconfiguring the house — essentially swapping the single-storey studio in front of the house for the garage.

The redesign featured improved U-values with fabric thicknesses of up to 600mm, and required a new planning permission.

While it was still mid-recession and funds were locked up in our unsold London house, the revised scheme was approved and the lesson that passive house principles have to be integrated with the design process from the beginning was learnt — the hard way.

Building fabric With the lower floor of the house built into the slope of the site, the external envelope had to have detailing for both above and below ground conditions, maintaining continuity of waterproofing, insulation and airtightness over a variety of external finishes while allowing for differential movement.

The wall solution comprises a 300mm double-stud structural timber frame filled with Warmcel set on the ground bearing concrete slab, and in front of a reinforced concrete retaining wall. Detailing was a challenge for both architect and, in implementation, the builder. With the Photography: FCD Architecture

exception of the epic ‘Details for Passive Houses’ book written by the Austrian Institute for Healthy and Ecological Building, published information in English was scarce, and I relied heavily on advice from pioneers in the UK passive house sector.

The build-up of the ground floor meanwhile, with the power-floated concrete slab sitting over EPS insulation, is designed to expose the slab internally and provide thermal mass that buffers against temperature fluctuations outside.

Sustainable development The site – which is three-quarters of an acre, orientated north-west to south-east – slopes seven metres to the main road, and was blighted by previous development attempts.

The upper 70% of the site is zoned as ‘significant open space’ in the village and was not open for development. Excavated material from the foundations was spread over this paddock area, rather than removing it from site – also a cost saving. From the outset we consulted with the village community via the parish clerk, which in a conservation area undoubtedly assisted with our planning application.

A 1,500 litre tank under the front drive collects all the rainwater from the roofs, and from there the water is pumped up to a larger storage tank at the top of the site which gravity feeds four garden taps. As far as possible we used local contractors and suppliers based within a 30 mile radius of the site, supporting the local economy and reducing site travel miles. We also have a solar thermal panel and a 3.5kW solar photovoltaic installation.

Construction, procurement and cost Of the project team of consultants, constructors and suppliers, I had only worked with

Explained: Form factor is the ratio of a building’s total surface area (the walls, roof and ground floor) to its treated floor area.

The smaller the form factor, the more efficient the shape of the building and the less surface area from which heat can escape. A form factor of under 3.0 is considered ideal for a passive house.

The lesson that passive house principles have to be integrated with the design process from the beginning was learnt — the hard way.

ph+ | case study | 61

S OF UP TO TH

F

62 | passivehouseplus.ie | Issue 25

OR S

OR

DO

WID

6 5m P V C S LIDIN G

the structural engineer previously. All were new to passive house except WARM and Green Building Store. As I expected, the contractor insisted that we use a quantity surveyor for valuations to avoid conflict of interest, and our QS became the contract administrator (we used a standard JCT contract with quantities), leaving me free to concentrate on site supervision and supply of information – and with hindsight, it was well worth the fees we paid.

I avoided nominating subcontractors so that the main contractor would remain responsible for all aspects of the project except for unfamiliar items critical to the passive house standard. We only sourced imported items though UK distributors who we assessed could provide reliable support during design and construction.

Prices obtained for the timber frame during the design stage revealed an apparent premium for systems developed for super-insulation and airtightness, and as timber frame is such a well-established building method, I reckoned we could get a better price by going through the main contractor. This proved to be a false economy, as it locked us into a manufacturer who would not modify their system, which was only designed to meet UK building regulations, and this ended up creating airtightness detailing difficulties.

In hindsight, if we had chosen the timber frame supplier in advance, it would have allowed us to prepare the design of the frame

before appointing the main contractor, thus avoiding the delays that resulted.

Procuring the triple glazed windows from the manufacturer Katzbeck in Austria was a lengthy process due to indirect communication through the UK installation representative. In future, I would always make time to visit the manufacturer. Note that tilt or lift-and-slide windows are difficult to make totally airtight due to the mechanisms involved. We now have two in our living area, and it is noticeably cooler here on really windy winter days.

Fortunately the contractor’s site agent, as well as being a skilled builder, remained open-minded and collaborative on the unfamiliar territory of a passive house build. But only previous experience could have prepared us for the level of airtightness detailing required. We air-tested on completion of the airtight layer, and – mistakenly measuring the internal volume according to the UK building regulations – thought we had passed the passive house target. We then carried out three further tests, with many hours spent finding and rectifying leaks before finally achieving the required value of 0.6 air changes per hour.

Another lesson we learned is that proposed substitution of specified insulation material must be reported and agreed.

In our case, the mineral wool in the roof was built up in layers of different thicknesses with different lambda values and the contractor varied these, resulting in a loss

of U-value.

For the sake of certainty, I selected a passive house certified Paul MVHR system, designed and supplied by the Green Building Store, and would still look no further if I was choosing one again.

Real-world performance There is no doubt that designing and constructing to the passive house standard requires a cultural shift from normal UK industry practice. The process is unforgivingly rigorous, and allows none of the ‘ducking and weaving’ possible under Part L. ‘There or thereabouts’ certainly will not do. If your building does not perform as modelled, look for deficiencies in the design and construction — not PHPP.

The maximum summer temperature we’ve recorded in the living area is 26C, and then only for a few days.

ph+ | case study | 63

Distributed in Ireland by www.tradecraft.ie

64 | passivehouseplus.ie | Issue 25

ph+ | case study | 64

That the topic of ‘summer overheating’ was a favourite on the seminar circuit last year indicates that architects have perhaps been taking design licence from the PHPP criteria that internal temperatures must not exceed 25C for more than 10% of the year, and that this could be tightened up. In our case, with quite large south-west facing windows, I built external aluminium horizontal louvre electric blinds into the façade, which are controlled by a simple sunlight sensor. With these deployed the maximum summer temperature we’ve recorded in the living area is 26C, and then only for a few days (PHPP gave our frequency of overheating as just 0.3%, or about one day).

If your design, as mine does, has a poor form factor (and if you want a vaulted ceiling!) you will have to achieve better U-values. That our master bedroom and guest bedroom — at opposite ends of the L-shape plan with a higher proportion of external envelope — are cooler than the rest of the house is perhaps logical but nonetheless wasn’t expected (even temperatures being promoted as a benefit of living in a passive house). However the differential is never more than 2C. In comparison our studio is heated nicely by us and our office equipment during the day, and a teenager in a small room with an Xbox doesn’t need further heating either.

We have a traditional gas-based central heating system with three heated towel rails and three radiators, all thermostatically controlled, and we have a frost protection heater battery on the ventilation system.

Temperature readings taken indicate that heat is only required when the external temperature falls to 7C or below, and we’ve found it is better to set the boiler programmer to ‘on’ all the time, and let the remote digital thermostat call for heat and fire up the boiler when required. The thermostat is left in the living area at 21C

and moved to the master bedroom (which has a radiator) at night and set at 19C. Overall, this is more efficient than setting the boiler to turn on and off during the day, because if we switch the boiler off it takes ages to bring the temperature up again, even though we are only dealing with a drop of 1 or 2C. However, this heating provision has struggled to keep up with sudden changes of temperature this winter, and in the very cold weather front from Russia earlier this year, it took a day to shift the temperature in the living area from 19.5C to 20.5C. This was not helped by the north-east wind finding the unsealed end of our four-metre wide lift and slide window. It should be noted that the stated occupancy of the house for PHPP was six, but is now normally two (meaning there

are less internal heat gains from the body warmth of occupants than designed for).

Our energy bill averages £900 or £4 per square metre, and is offset by earnings from renewables, leaving us with a net annual energy bill of £250. What’s more, our energy usage now is well within that predicted by PHPP. In my opinion, if there is one disadvantage with living in a passive house, I think it is that as an occupant one’s body comes to expect the high standard of thermal comfort the standard delivers — and becomes physiologically less tolerant of lesser environments, especially draughty ones.

But as one of our visitors exclaimed during an International Passive House Open Day: “why would anyone not want to build a passive house?”

CONSTRUCTION IN PROGRESS

1

2

3

1 The view south-west over the three-quarters of an acre site, which slopes seven metres to the main road; 2 the floor build-up features 200mm EPS insulation, increasing to 350mm under the reinforced concrete slab; 3 the retaining walls are tanked with Visqueen self-adhesive tanking membrane, insulated externally with 100mm of expanded polystyrene, and protected with Visqueen Protect and Drain membrane.

ph+ | case study | 65

SELECTED PROJECT DETAILS Clients: Tony and Marlen Godwin Architect: FCD Architecture Passive house designer: WARM Low Energy Building Practice Quantity surveyor: ADM Surveyors Limited M&E design: EDP Consulting limited Main contractor: DW Hicks Building Co Ltd Timber frame: Harlow Ltd (design, manufacture, erection) MVHR: Paul, supplied by Green Building Store Ventilation system installation: Dave Manby Cellulose insulation: Warmcel Glass & mineral wool insulation: Knauf & Rockwool Windows & doors: Katzbeck, supplied by JLH Roof window: Fakro Airtightness products: pro clima supplied by Green Building Store Solar evacuated tubes: Worcester Bosch via Envirogen Ltd Solar photovoltaic panels: Solarworld via Envirogen Ltd Rainwater harvesting: Rainwater Harvesting Ltd

CONSTRUCTION IN PROGRESS

1

2

3

4

5

1 Erection of the timber frame in progress; 2 the Durelis VapourBlock board features a factory fitted transparent airtightness and vapour control layer on one side; 3 service penetration taped and sealed with pro clima Tesco tape; 4 rigid ductwork for the Paul Novus 500 mechanical ventilation heat recovery system installed in the metal web joists; 5 use of Marmox thermal break boards around the lightwell to cut out thermal bridging.

66 | passivehouseplus.ie | Issue 25

IN DETAIL Building type: 221 sqm detached two-storey timber frame house with semi-basement.

Completion date: April, 2015 Budget: £508,163 Passive house certification: Certified Space heating demand (PHPP): 15 kWh/m2/yr Heat load (PHPP): 9 W/m2 Primary energy demand (PHPP): 79 kWh/m2/yr Heat loss form factor (PHPP): 3.38 Overheating (PHPP): 0.3% Environmental assessment method: Nil Airtightness (at 50 Pascals): 0.6 ACH @ 50 Pa Energy performance certificate (EPC): A93 Measured energy consumption: Measured average annual gas consumption of 4,587.44 kWh and electricity consumption of 6,964.33 kWh (total of 11,551.77 kWh or 55 kWh/m2/yr.

Adding back estimated contribution from solar thermal (estimated as per MCS methodologies) and solar PV (50% of generation as per SAP 2009) of 3,084 kWh/yr combined gives a total energy consumption of 14,636kWh (or 66kWh/ m2/yr) compared to PHPP design figure of 17,476kWh (or 79 kWh/m2/yr).

Thermal bridging: Thermal bridges were designed out by careful detailing with the assistance of the passive house designer. The edges of the raft floor slab are wrapped with a minimum of 200mm EPS insulation; the junction of slab and retaining wall was wrapped with an additional 100mm of EPS (total 300mm); retaining walls extending beyond the building were disconnected from the main structure and masonry built off the top of the retaining wall was isolated using Marmox blocks. There is no steel in the superstructure although there was a concern about the extent of gang nails plates used in the truss forming the main vault. The mass was calculated and the effect was negligible. The windows frames are solid Spruce and lapped with insulation externally.

Y-value: 0.003 W/(m2K) Energy bills (measured or estimated): Average annual gas bill (heating and hot water) of £267.85 and electricity bill of £633.49 (averaged over three years) = total average annual energy bill of £946.73. Average annual feed-in-tariff (for solar PV £429.69) and renewable heat incentive (for solar thermal)

of £220.26. Subtracting these figures from £946.73 yields a net average annual energy bill of £251.39 or £21 per month.

Ground floor: 150mm compacted base followed above by 50mm quarry stone fines as blinding, DPM / radon barrier, 200mm EPS in 2 x 100mm layers (increasing to 350mm under the slab), 150mm reinforced concrete slab with 300mm deep x 600mm perimeter beam and 300mm x 1200mm structural ‘toe’ reinforced up into the retaining walls. Slab is power floated with a dry shake surface hardener topping.

U-value: 0.148 W/m2K WALLS The house is cut into a sloping site. The structure comprises a double stud timber frame bearing on a concrete slab located in front of reinforced concrete retaining walls made structurally integral with the slab. Timber frame is clad externally with three different finishes.

Main front elevation (from inside to out): 12.5mm plasterboard, 37mm battened service void, 12.5mm P5 Durellis vapourblock (airtight) OSB board, 63mm non-loadbearing stud + 97mm void + 140mm loadbearing stud forming a 300m void filled with Warmcell recycled newsprint insulation, 12.5mm P5 Durellis OSB board, 100m mineral wool insulation, 50mm airgap, 110mm local Clipsham limestone.

U-value: 0.099 W/m2K Rear elevation: Timber frame structure as above but clad with 150mm mineral wool insulation between cross battening, moisture barrier membrane and Rockpanel boards in shiplap arrangement. The wall to the boundary is similar, with thin-coat through-colour render on 10mm cement board. U-value: 0.088 W/m2K The retaining walls are tanked with Visqueen self-adhesive tanking membrane insulated externally with 100mm of expanded polystyrene protected with Visqueen Protect and Drain membrane. U-value: 0.087 W/m2K ROOF The main roof structure is a vaulted truss fully insulated. The build-up from inside to out is: 12.5mm plasterboard, 37mm service void, 12.5mm P5 Durellis OSB board, 550mm glass mineral wool, 60mm Rockwool Hardrock Multifix (DD) board, counterbattens + breathing moisture proof membrane + battens (70mm), plain fibre cement slates.

The wing to the rear has a similar attic truss with a void over the insulation. The build-up is similar but with 40mm counterbattens (providing a ventilation airgap), 12.5mm plywood, geotextile membrane and standing seam aluminium roofing. U-value: 0.074 W/m2K Windows & doors: Linea by Katzbeck windows

sealed with pro clima tapes. Frame: Spruce wood-powder coated aluminium with Uf-value of 1.1 W/m2K. Glazing: Interpane iplus E, 90% argon filling, Ug-value of 0,5 W/m2K, g-value of 5%.Turn & tilt window overall U-value: 0.78 W/ m2K. Fixed window overall U-value: 0.72 W/m2K. Front door overall U-value: 1.2 W/m2K Roof windows: 2 x Fakro FTT U8 Thermo passive house-certified quadruple glazed roof windows. Whole window U-value: 0.58W/m²K Heating: Worcester Bosch gas boiler 12i 24Kw ‘wet’ distribution to 3 Uniline panel radiators and 3 MHS heated towel rails. Gas boiler also serving Worcester Bosch 210L hot water cylinder with dual coil indirect heating.

Worcester Bosch Solar-Lux 12 (12 evacuated tube) solar thermal system also serving same hot water cylinder via indirect heating coil.

Estimated annual output of 1,112 kWh. Electricity: 3.5kWp solar photovoltaic array with 14 Solar World mono crystalline panels in-roof mounted. SMA inverter: Sunnboy 3000HF. Estimated annual output using SAP of 3,363 kWh.

Ventilation: Paul Novus 500 mechanical ventilation heat recovery system with frost protection.

Water: All rainwater is collected for garden irrigation in a 1,500L tank with an automatic pressure switched pump. A 5,000L tank located at the top of the site is fed from the lower tank. Water is then distributed by gravity to locations in the garden and paddock as required.

Sunshading: Hunter Douglas aluminium horizontal motorised venetian blinds controlled by manual switch or sun or temperature movable sensors stuck to the glazing located according to user preference.

Green materials: The overriding criteria in the selection of insulation materials was to avoid the use of those based on petro-chemicals.

Thus Warmcel recycled newsprint was used on the walls and mineral or glass wool elsewhere.

Petrochemicals could not be avoided below ground and EPS was specified as it has a more environmentally friendly manufacturing process.

The timber frame superstructure was chosen to avoid steel or masonry.

ph+ | case study | 67

Calling all…

Better Homes Deep Retrofit Programme

Architects Homeowners BER Assessors ...

Bayview Better Homes Deep Retrofit Programme Bayview is Ireland’s leading provider of wholehouse deep retrofit solutions, specialising in: · External & Internal Insulation; · Heat Pumps; · Solar Thermal & PV; · Air Tightness detailing; · Mechanical Ventilation; · Double & Triple Glazed Windows and Doors.

Bayview will project manage all aspects of the process from design through to installation – developing a bespoke deep retrofit solution perfect for each individual home.

Grants available from 50% to 95% of all energy upgrade works completed. Bayview will manage the grants and energy credit process.

CTC EcoAir 510M

Scandinavia’s #1 Air Source Heat Pump • Most hot water in its class (> 300 litres) • Optimal seasonal coefficient of performance (SCOP) of 3.9 @ 50rps • Control for external heat source (oil, gas, electricity, etc.)

• SG-ready (ready to adapt to electricity prices, PV etc.)

• Provides heating down to -220C and produces up to 650C water temperature • Night-time noise reduction • Monobloc system – no specialist servicing required Take full control of your heating system with CTC Internet module and CTC Connect App – allowing remote monitoring and control of the system via smartphone.

Contact Bayview today for a free “no-obligation” survey on betterhomes@bayviewcontracts.com or telephone 01 6533117 68 | passivehouseplus.ie | Issue 25

Better Homes Deep Retrofit Programme

HEAT PUMP GRANTS what you need to know

As of 16 April, owners of pre 2011 Irish homes are now eligible for generous grants to retrofit heat pumps, and in so doing help to create comfortable, economical, low carbon homes. But what’s the thinking behind the scheme, and what results can participating homeowners expect?

Words by Jeff Colley

F

ollowing an announcement by climate change & environment minister Denis Naughten, the Sustainable Energy Authority of Ireland has introduced a number of changes to the Better Energy Homes grant scheme for retrofits including increased grants for external wall insulation and heating controls, and two measures which signal a dramatic change in emphasis: the elimination of grants for fossil fuelled boilers and the introduction of heat pump grants from 16 April.

In a detailed statement to Passive House Plus, SEAI said that the changes reflect an objective to drive building fabric upgrades and stimulate an accelerated decarbonisation of heat supply. The decision to introduce heat pump grants was “primarily

to accelerate the move away from fossil fuels towards renewable forms of heating. Hence the discontinuation of the grant for oil/gas boilers with controls and the introduction of a single higher grant for heating controls only.”

SEAI said that the addition of a heat pump grant arises from the ongoing review of the programme and the objective of supporting more renewable heating options, on top of the existing supports for solar thermal.

“Heat pumps are very efficient electrical devices which convert energy from the outside of your home into useful heat inside your home, in the same way a fridge extracts heat from its inside,” SEAI said. “They even work in Ireland’s cold winters. This extracted heat can then be used to heat your home and hot water. The beauty of a heat pump

is that every unit of electricity used in the process yields about four units of heat. In well insulated houses they are very economical to run and are an extremely efficient alternative to fossil fuel-based heating systems.”

There are a number of different types of heat pumps – including air-to-water, groundto-water, exhaust air-to-water, water-to-water and air-to-air heat pumps, which have varying characteristics and applications. All of these forms of heat pumps are eligible for the new grants, which comes at a flat rate of €3,500 for all types with the exception of air-to-air, which receive a far lower grant of €600. Homes built from 2011 onwards are ineligible.

Air-to-air systems are seldom used in homes in Ireland. They’re essentially air conditioning systems – which can efficiently heat or cool

ph+ | guide to | 69

A HEAT PUMP THAT’S EASY TO LIVE WITH

>> A winning investment >> Energy savings up to 70% >> Hybrid gas and oil solutions >> Single unit from 4kW - 25kW >> Cascade up to 10 units >> Cascade with DeDietrich boilers >> nZEB solution >> Control two heat curves internally

Contact:

Member 70 | passivehouseplus.ie | Issue 25

www.origen.ie sales@origen.ie (01) 4191984

The new grants: What are they worth?

Air to water heat pump

€ 3,500

Ground to water heat pump (horizontal)

€ 3,500

Ground to water heat pump (vertical)

€ 3,500

Exhaust air to water heat pump

€ 3,500

Water to water heat pump

€ 3,500

Air to air heat pump

€ 600

Technical assessment - payable only with heat pump grant

€ 200

the air in a building but don’t heat water – and the low grant may be a reflection of both the lack of demand and their relatively low capital cost. Domestic hot water heat pumps – which are designed to generate hot water only – are not eligible.

There is an argument that a flat grant for all other heat pumps is something of a blunt instrument, and doesn’t reflect the fact that different heat pumps will achieve different efficiencies – depending on anything from the temperatures they’re designed to operate at, to the temperature of the heat source they’re tapping into. For instance, ground source heat pumps tend to have higher efficiencies than air source units during the heating season due to the relative stability of ground temperatures below certain depths, though air source units – which involve much lower capital costs – have closed the gap in recent years as manufacturers have refined their design, and there is evidence to indicate that space heating demand in many Irish buildings may be peaking in Ireland’s frequently relatively mild but windy weather, as the guide to air source heat pumps in Issue 24 of Passive House Plus discussed.

Investments in high tech sustainable technology ideally shouldn’t happen till cost-effective fabric energy efficiency measures have first been delivered, and SEAI’s changes to the grant system have been designed to reflect that.

“For optimum efficiency, heat pumps should only be installed in well-insulated homes,” SEAI said. “If the home is not properly insulated it is highly likely that the home will not be heated properly and the homeowner’s electricity bills will be higher than expected.”

To address this, SEAI has introduced a process that it claims will ensure that the homes are actually suitable for a heat pump based on a fabric first approach. The

minimum requirement will be based on the total heat loss for the dwelling, which includes the fabric and ventilation heat loss. The Heat Loss Indicator, or HLI, is the total heat loss per square metre of dwelling floor area. This is calculated using SEAI’s Deap software, which is used to determine Building Energy Ratings for homes, and to determine compliance with Part L of the building regulations for new homes. The HLI is defined as follows: HLI= (Fabric Heat Loss+Ventilation Heat Loss )/(Floor area of dwelling) [W/(K∙ m^2 )] The HLI will be used to determine the energy performance of the dwelling for the purpose of Better Energy Homes grants for heat pump systems and must be no more than 2 W/Km2, which industry sources have indicated will typically translate to roughly a C1 BER. Central to determining this calculation will be the role of an independent SEAI-registered technical advisor, who will carry out the required technical assessment to determine the suitability of a home for a heat pump system.

How can you improve the Heat Loss Indicator of a poorly performing home?

The technical assessment report will set out the specifics for each individual home. SEAI said it is likely to include recommendations to improve the insulation of the walls, attic and possibly floors. It may also require the installation of high performance double or triple glazed windows and doors. “Doing this will generally make a home more airtight which is good but which will necessitate a ventilation strategy for occupant health and to protect against condensation effects,” said SEAI. “That might sound like a contradiction, but ventilation is extremely important.”

SEAI already offers grants for three types of wall insulation (external wall insulation, internal dry lining and cavity wall insulation) as well as attic insulation, for new homes built before 2006.

Who is the technical advisor and what do they do?

An independent SEAI-registered technical advisor will be an engineer, architect, quantity surveyor or relevant construction professional who is also a registered domestic BER assessor and who has attended an SEAI technical advisor workshop.

The technical advisor will calculate the Heat Loss Indicator and thus the home’s suitability for a heat pump. This information may already be available where a home has a current valid BER. If not, the advisor will publish a new BER, as up-to date BERs are prerequisites for the heat pump grant. The technical advisor will produce a technical assessment which will indicate that either the home is already heat pump ready or, if not, what upgrades are necessary to make it so. At the time of applying for a heat pump grant, the homeowner is required to upload the technical assessment document attesting to the home’s eligibility or what needs to be done to achieve eligibility.

Where upgrade works are necessary then the technical assessment document can be used by the homeowner to get quotes from contractors for these works.

Homeowners who successfully proceed with a grant-aided heat pump system installation will receive a €200 grant towards the cost of the technical advisor.

“The introduction of the independent SEAI registered technical assessor role is a further step to help professionalise residential retrofitting,” said SEAI, adding that the authority will soon publish a list of independent SEAI-registered technical advisors on its website. To be

ph+ | guide to | 71

It’s ALL Inside!

EXHAUST AIR HEAT PUMP NIBE F730 No Outdoor Heat Pump Required An ideal solution for apartments & housing schemes Heating, Ventilation & Hot Water Inverter Compressor 1.1 to 6KW Remote Control & Monitoring by Uplink - Smartphone APP & PC Modular Construction - pre plumbed & pre wired

Erp Info In ready for Assessors - call 01 2864 888 or visit www.unipipe.ie

Builders - Just one machine & one trade required for Part L compliance!

Developers - Lower build costs for apartments as no district heating required Double award winner at The Energy Show, Dublin 2016 72 | passivehouseplus.ie | Issue 25

www.unipipe.ie

eligible for registration candidates must be a registered domestic BER assessor and have a FETAC Level 7 in engineering, architecture, quantity surveying, construction or equivalent. Candidates must demonstrate adequate experience and full membership of relevant professional associations.

What are the requirements to register as a heat pump installer?

SEAI told Passive House Plus that eligibility requirements for heat pump installers would include a FETAC Level 6 plumbing certificate with a minor in electrics, a certificate of competency from the manufacturers of the appliances they intend installing, and – from 1 January 2019 – FETAC Level 6 in heat pump installation or registration on SEAI’s register of renewables installers. As Passive House Plus went to press, Heat Pump Association of Ireland director Paul O’Donnell said that SEAI had confirmed it would allow for equivalent proof or grandfather rights to non-FETAC 6 paper holders.

As with all other registered contractors under the programme, heat pump installers

will also be required to abide by the Better Energy Homes terms and conditions, including requirements to be tax compliant and properly insured. They must complete the installation in full accordance with the code of practice. They will also be subject to SEAI’s quality assurance and disciplinary procedure.

The heat pump section in the code of practice is currently being updated Are there any differences to other Better Energy Homes grant eligibility terms?

Aside from the requirement for the technical assessment report described above only one eligibility term is different for the heat pump system grant. The year of construction and first occupation for the home in question must be before 2011. This eligibility criteria has also been extended to the solar thermal grant.

“Homes built after this date were subject to building regulations which mandated a minimum level of renewables,” said SEAI. (Renewable energy became mandatory for new homes in TGD L 2008, also including all new homes where planning applications had been lodged before 1 July 2008, unless the

structure of the external walls was substantially completed by July 2009.)

For insulation grants and heating control grants under the Better Energy Homes programme, the requirement remains unchanged where construction and first occupation must be before 2006.

Response The Heat Pump Association of Ireland (HPAI) – the independent body set up to represent the heat pump industry – welcomed the news, while noting that the scheme was announced sooner than the industry expected.

The sector has been booming in recent years. As reported in issue 24 of Passive House Plus, data from SEAI’s National BER Research Tool indicates that 37% of all new homes built in 2017 featured heat pumps – a figure which may be conservative, given the signs that thousands of self-builders may not be obtaining BERs before occupying homes, and the fact that heat pumps are the dominant heating system in self-build houses, with over 67% of detached homes where the owner had obtained a BER prior to occupancy opting for

The indoor units for modern heat pumps often now resemble stylish fridges in their appearance. Seen here, clockwise from left, are systems from De Dietrich, Daikin, Heliotherm, Nibe and IVT.

ph+ | guide to | 73

switch on to renewable energy For over 20 years Energy Superstore has been one of Ireland's leading suppliers and installers of renewable heating products in both the domestic and commercial heating sector with over 2,500 heat pumps installed.

AirX Introducing IVT AirX air source heat pumps, the most effcient monobloc air source heat pump range in it’s class.

BEST SUSTAINABLE TECHNOLOGY OR PRODUCT

sou IVT AirX air source heat pumps are IVT's quietest ever and boast their best ever seasonal coeffcient of performance score of up to 4.68. This gure means that for every kilowatt of energy required to power the heat pump, you get almost 5 kilowatts out.

In fact, IVT AirX air sou source heat pumps are so effective, the savings they can generate can be compared with those of ground source heat pumps. The difference is that with an AirX you don't have to dig trenches or drill boreholes.

IVT AirX is also quieter than any of its rivals which means it can be placed more easily outside your property. comp The inverter driven low-power compressor automatically adjusts heat production for your home's heat demand. When the house needs more heat the compressor works harder but when it's warm outside, the compressor speed reduces to a minimum increasing your savings. cont system ensures The IVT AirX intelligent control you never need to worry about your heat pump settings.

Energy Superstore are also specialists in:

Underroor heating - Wood pellet heating - Heat recovery ventilation Solar panels/photovoltaic - Heat pumps

Call us on 057 932 4062

Cappincur, Tullamore, Co Offaly 74 | passivehouseplus.ie | Issue 25

www.energysuperstore.ie sales@energysuperstore.ie

Outdoor units serve as the collector for air source heat pumps, including clockwise from above left, units from Mitsubishi and Panasonic (installed as part of Tipperary Energy Agency’s SuperHomes retrofit scheme), CTC (an illustration showing the inner workings), and a Thermia unit outside Ireland’s first certified passive house retrofit, in Salthill, Co. Galway. a heat pump.

“While this message is fantastic for the heat pump industry we think the announcement of grants for retrofitting heat pumps will account for quite a small impact on sales,” said HPAI director Paul O’Donnell.

“Of course the HPAI welcome any positive encouragement of the use of heat pump technology – that it’s not just for new housing, that the grants for oil and gas are gone, and it’s a positive message in terms of public awareness of heat pumps.”

Passive House Plus also spoke to O’Donnell’s fellow HPAI director Brian Cooley and chairman Calin Tasnadi, who welcomed the announcement, but warned that the introduction of many new suppliers and installers means that care would be required to ensure the right quality of product arriving into the market and of heat pump installation, so that end users have a positive experience of the technology.

“Grant aid is always seen as benefit and will give a boost to the heat pump industry on the whole, mainly due to the government’s stamp of approval to say ‘this is the future – replacing fossil fuel with a renewable source like heat pumps is the way forward,’” said Brian Cooley.

The HPAI said that the criteria surrounding the persons deemed qualified to fit a heat pump in order to receive a grant would risk ruling out many of the best and most experienced installers if SEAI had decided to require FETAC qualifications only. “There are many installers throughout the country installing heat pumps for close to 20 years with thousands of completed installations. These installers do not have plumbing backgrounds but have backgrounds in other areas of engineering,” said Cooley.

“While training requirements are good, if they’re too regimented it may prevent excellent installers who don’t happen to have the right paperwork in place. An alternative solution suggested to SEAI is that manufacturers and distributors of each particular brand will issue a sign off that the relevant instruction and training has been given to the prospective installer” said O’Donnell.

The HPAI is also suggesting that SEAI may look to add an additional band to qualifying homes. As it stands a home with a HLI of 2 or under can be retrofitted with a heat pump without any additional insulation measures once the unit can achieve a seasonal performance factor of 125% as per Ecodesign

requirements when delivering space heating at 55C. This means it is possible to retrofit the heat pump to a medium temperature system and meet the criteria laid out, though the efficiency of heat pumps substantially improves when lower temperature heat output is achieved.

“We believe that a second band of 35C should be added where an existing underfloor system is installed or fan coil radiators are being retrofitted and that the HLI allowable for these homes should be up to 2.5, with a separate SPF target set for 35C,” said Cooley.

“The additional heat loss in a home like this will be offset by the higher SPF of the heat pump due to the lower required operating temperatures ensuring the same net result.”

The development of the heat loss indicator as a concept is a noteworthy departure for SEAI in its own right. One of the main criticisms of focusing on the results a building achieves in Deap is due to the fact that Deap deals fundamentally in net primary energy (taking account of all energy used for space heating, hot water, ventilation and lighting, but disregarding plug loads). This means that a poorly insulated building with an inefficient heating system can achieve an excellent BER,

ph+ | guide to | 75

OUR EXPERTISE

YOUR COMFORT

Solutions for every idea.

Daikin Altherma low energy, BER compliant Air Source Heat Pumps.

Heat Recovery Ventilation Systems for both new and retrofit projects.

info@rosstechnical.ie Tel: (087) 2503115

SPECIALISTS IN| THE 76 | passivehouseplus.ie Issue 25APPLICATION OF RENEWABLE ENERGY SOURCES

provided that the high energy demand is offset by a sufficiently large solar PV array, for instance – even if that PV array was discharging all of its power into the grid or – in apartments, the landlord areas – and providing no appreciable benefit to the occupant. But by singling out heat loss from building fabric and ventilation, the HLI effectively shuts the door to any such energy offsetting. Also, the fact that SEAI have determined that only BER assessors with additional qualifications will be eligible to conduct a HLI assessment suggests a recognition of a reality SEAI have long denied: Deap is being used as a design tool.

Putting aside concerns about some of the assumptions in Deap – for instance assuming air permeability of homes without airtightness test results, when the evidence indicates that homes built in the second half of the 20th century may be much leakier than pre-war homes – HPAI’s SEAI liaison officer John O’Shaughnessy said: “Deap is the preferred tool of the department and has proven to work on a lot of social and fuel poor energy upgrades in the past.” But data – where available – on how much energy a given home has been using should be a central concern, O’Shaughnessy suggested. “In our view more attention should be paid to the heating system in place as that will have the most impact on the performance of the heat pump rather than

how it scores on testing.”

O’Donnell expands on this point: “The key question to ask in an existing building is how much the homeowners are spending on energy. When we have that information, we know how many kilowatts they’re using. If you ask how many litres of oil or kWh of gas you’re using, then we know how much energy the heat pump needs to provide.” O’Donnell said this information would prevent heat pumps being grossly undersized, but warned of the risk of comfort-taking – the phenomenon where building occupants take back the benefits of energy efficiency improvements by heating their home to higher temperatures – causing energy use to increase, given the low running cost. “Assuming a COP of 4 and a mix of night rate and day rate electricity, the cost is about 3.5c per kWh. If you’re going to fit anything to a house, the one thing that will pay for itself most quickly is a heat pump.”

Although the HPAI has some concerns about whether buildings which can’t be cost-effectively brought up to meet the necessary HLI target should be excluded from heat pump grants, the association acknowledged the benefits of having an independent technical advisor to help with the decision on insulation level required and heating system upgrade.

‘You don’t need to have a super-insulated

building to have a heat pump instead of an oil or gas boiler, but it’s good that SEAI are taking a considered approach – that the homeowner gets an independent assessor to check it out before proceeding to the next step,” said O’Donnell. “So while putting a heat pump in to a draughty old building instead of an oil boiler will still save money, having a little bit of input to reduce the demand first is a good thing.’

While welcoming the grants, Brian Cooley emphasised that the HPAI was keen to continue to work with SEAI on additional proposals to fine tune the scheme and its workings.

“We have had a number of suggestions from our members which we feel could benefit the scheme as a whole,” he said. “We would like to see domestic hot water heat pumps supported. They would be a welcome addition in allowing apartments to participate in the scheme and in situations where the piping and wiring situation in a house doesn’t easily facilitate the installation of the hot water tank directly connected to the main heat pump.

“In the case of a listed building where insulation measures are impossible but the assessor’s report shows that the installation of a heat pump would reduce the carbon emissions of the building by 40%, we ask that these buildings would also be allowed,” said

The inner workings of the Nilan Compact P exhaust air heat pump.

ph+ | guide to | 77

Passive house approved heat recovery systems

A winning combination from

& High efficiency heat pumps

www.climatecontrol.ie info@climatecontrol.ie

A MODULAR SYSTEM OF SEVERAL SOLUTIONS COMPACT P BY NILAN

GEO 3/6 SCOP

Compact P L

A B C D E F G

A

AIR 9 SCOP

5.11

Nilan

GE=3

AIR9

5.17/5.15 Nilan

A+++

A +++

1081 kWh/annum 57 dB

1081 kWh/annum

+ +

0 dB 2015

B D

+

E F

+

G

812/2013 2015

A B

+

C

X

A +++

A+

+

A

+

A+++ A++

A+

+

GEO6 35 °C

A +++

A++

1081 kWh/annum

GE=3

35 °C

A +++

811/2013

2015

C D

X

E F G 811/2013

“The complete Solution” Compact P providing ventilation, heat recovery, air heating / summer air cooling, producing domestic hot water from exhausted air, with optional back up system, Air9 (Air-to-Water) or Geo 3-6 (Geothermal heat pump). Providing a customised design and installation to meet your building demands by Nilan Ireland.

Nilan Ireland Tel. +353 (0) 66 7169587 Sales@nilan.ie · www.nilanireland.ie 78 | passivehouseplus.ie | Issue 25

Heat pumps work most efficiently when they supply heat to well insulated homes and via low temperature heat distribution systems such as underfloor heating and low temperature radiators, such as this one installed under the Tipperary Energy Agency Superhomes’ scheme.

Cooley. “A significant emission reduction should be rewarded.”

SEAI have nonetheless made a significant change by opening up the grants to pre-2011 homes, compared to the pre 2006 cut-off point that previously applied under the Better Energy Homes scheme.

In the region of 220,000 new homes were built between 2006-2008 alone, at a time when the peak and gradual collapse of the house-building boom led to the construction of homes which are likely to be extremely leaky, inaccurately insulated and non-compliant with minimum standards.

Energy consultant Mark Shirley of 2eva. ie welcomed the move. “I’m delighted that they’ve brought it out and moved the benchmark forward to 2011,” he said. “It’s capturing a huge number of homes that were built in the boom. I think that’s an acknowledgement of a realistic situation. Probably a significant majority of them would benefit from an energy upgrade now – albeit many of them are only ten years old.” Shirley said that homeowners considering heat pump grants should consider insulation work too, in spite of the fact that insulation measures aren’t available for homes built and occupied post 2005. “You would like to hope that if people are going to the trouble of a heat pump they’d give consideration to an insulation upgrade.”

One man who has a rare amount of experience in retrofitting heat pumps – and no commercial involvement in a heat pump company – is Tipperary Energy Agency CEO Paul Kenny, who has overseen the installation of scores of heat pumps into energy upgraded homes in the Tipperary region and beyond under the Superhomes scheme, along with other energy efficiency measures including

airtightness, insulation upgrades and the installation of mechanical ventilation systems, combining cost-effective energy efficiency, comfort and indoor air quality.

As reported previously in Passive House Plus, 20 of the participating SuperHomes dwellings – 19 of which were fitted with Mitsubishi Ecodan air-to-water heat pumps – have been undergoing monitoring by students at LIT since March 2017. Indicative results are remarkably positive for retrofits: the average seasonal COPs for the 20 heat pumps are working out at roughly 3.2 – as an average for both space heating and hot water, including a heating season that took in the ‘Beast from the East’.

Kenny cautions that similar results can only be expected if real care is taken to ensure that the retrofits are properly designed to ensure that heat pumps can run at sufficiently low temperatures. “If the level of technical knowledge, engineering design and supervision in the installation and commissioning is not sufficiently resourced, we could end up with poor performance,” he warns, offering an example. “Two contractors. One prices to change radiators, the other doesn’t. In the case of the one who doesn’t, the heat pump will have to run at higher temperatures, at lower efficiencies, leading to lack of customer satisfaction.

What we see at SuperHomes is a combination of comfort and a meter that tells the homeowner what they’re paying, leading to high satisfaction levels.”

Ultimately, time will tell as to whether these kind of results can be replicated nationally and at scale. But there are signs of a significant ratcheting up of policy ambition in the design of this scheme – and SEAI’s increasing

efforts to stimulate profound energy savings from Ireland’s existing stock via the likes of the Deep Retrofit scheme – reflecting a recognition of the need to help Irish people to invest in high levels of energy efficiency and to replace climate-destroying fossil fuels with clean, cost-effective renewable energy sources. And – all of the usual caveats notwithstanding – that can only be a good thing.

About the Heat Pump Association of Ireland The Heat Pump Association of Ireland is the industry representative body of manufacturers and importers of heat pumps in the Republic of Ireland. Membership is open to all manufacturers and importers and distributors of heat pumps, with the aim of giving the industry a single representative voice with other sectors of the construction industry, educators and legislators. It is a non-profit company established to promote the benefits of heat pumps. The heat pump brands represented include the following: Alpha Innotec, De Dietrich & Robur (Origen Energy), Carrier & LG (DWG Refrigeration Wholesale), Ciat & Kronoterm (Glenergy), CTC & Viessman (Precision Heating), Daikin, Firebird, Grant Engineering Ireland, Groupe Atlantic (Ideal), Heliotherm (Climate Control/Renewable Energy Centre), Hitachi, IVT Bosch (Energy Superstore), Mitsubishi Electric, Mitsubishi Heavy (Diamond Air), Nibe (Unipipe), Nilan, Panasonic, Thermia (Ashgrove Renewables), Toshiba (AC Heating/Baxi Potterton Myson/GT Phelan), Samsung (Joule), Water Furnace, Weider, Euronom & Argo (Alternative Heating & Cooling). 

ph+ | guide to | 79

The Tipperary Energy Agency team outside their office at Erasmus Smith House in Cahir.

TIPPERARY ENERGY AGENCY AT 20 IN S IGHTS O N HOW TO K I C K- STA RT C L I M AT E AC T I O N

One of Ireland’s pioneering and most consequential green organisations, Tipperary Energy Agency, turned 20 at the end of February, evolving from one man buried in sawdust to a 24 strong team whose efforts are influencing national policy and earning European plaudits. But why has the agency endured and grown, and what lessons can be learned to help others play their part in delivering the transition we so urgently need to low energy buildings and clean energy generation? Two of the central figures in the agency’s development spill the beans, along with some of the many partners the agency has worked with over the years.

80 | passivehouseplus.ie | Issue 25

Working with communities, chasing kilowatt hours

By Tipperary Energy Agency founder, Seamus Hoyne

(above left) SuperHomes participants Neil and Aileen Walker are thrilled with the comfort and enery savings at their A-rated retrofit in north Dublin; (above right) Tipperary Energy Agency founder Seamus Hoyne in the agency’s rudimentary original offices in the late 90s.

R

eflecting back on 20 years of the Tipperary Energy Agency presents an opportunity to reminisce on an amazing journey. From the outset the agency has been about partnership. Tipperary Institute and the then North and South Tipperary County Councils joined forces to apply to the highly successful EU SAVE programme to fund the development of the Agency (over 300 such Energy Agencies were established across Europe). At the same time that the TEA was being established a new agency was also set up in Larissa, Greece with both new agencies being mentored by the Styrian Energy Agency in Austria. I landed the job as the manager in February 1998 and was given a 300 page document (the EU proposal), a mobile phone, and directions to a small office over the then South Tipperary area offices in Cahir. There was a promise of an office space in the old VEC School building in Cahir which I was told needed “some work” (this turned out to be the woodwork room which still had a large saw and two significant piles of saw dust). From these humble beginnings the agency now occupies two offices in Cahir and Nenagh.

From an organisational perspective the vision from the agency from the outset was focused on partnership, sustainability and community engagement. However, without the agency being able to justify its existence and generate income for itself it was not going to be in a position to affect change in the region. With this in mind the first business plan was written in month one as I viewed the grant from the EU as a “bank loan” for the first three years.

Early on I visited the Styrian Energy Agency to gain their insights. Arriving in Graz in September 1998 I met the agency director, Mr Gerhard Ulz. During three intensive days of activity where I was exposed to a fantastic

learning experience the biggest memory I have is Gerhard telling me on day one, “There are two important things you need to do to have a successful energy agency. First make sure you have refreshments in the office for your visitors (Gerhard had a special drinks cabinet) and second is find the crazy people”. When pushed on the “crazy” people Gerhard meant that you needed to find those people who will go beyond the norm, who will challenge the status quo, who will ask the difficult questions. His advice was to put some of them on the board, get involved with them on projects and support them to reach their ambitions.

The board of the agency has changed over the years but the common feature has been vision and ambition. The board in the first three years guided the agency to a position where agreement was reached between Tipperary Institute and the councils to continue to fund it after the EU SAVE Contract.

To put this in context, over 30% of all energy agencies funded under SAVE did not continue after their initial contract.

The early milestone came when I met with John Fogarty and others from the Templederry area of Co. Tipperary. John (who I now affectionately refer to as one of my crazy people) and his team had a vision to use the natural resources in their area to the best advantage of the community. The first meeting was in 1999. Over 10 years later the Templederry Community Wind Farm started generating electricity. This project is one of the many visual demonstrations of why local/ regional energy agencies are needed. Without the agency many of the steps in the development process for the community group wouldn’t have been achieved – but likewise without the community the agency would not have been able to deliver the project. We have managed to find lots more local and community-driven initiatives since.

When I sat down with Paul Kenny (now CEO) in 2006 when he joined the agency first, we looked through a pile of 15-20 energy audits of local authority sites. That day we made a decision to translate the words in those reports to actual kilowatt hours saved (or generated).

The decisions at that point to move to a more action-orientated approach was, on reflection, momentous as it meant that we now had to work really hard on convincing people to invest, we had to get better at procurement and we had to maximise funding availability to support the business case for investment.

The final highlight which I’ll select is the securing of the major EU contract under the CONCERTO programme to implement the SERVE project. Led by Tipperary Institute with partners in five EU Countries and involving an investment of €10.4m, this funding allowed Tipperary Energy Agency to scale and hire new staff. It enabled it to develop real expertise in retrofitting of buildings, heat energy contracts and many other aspects. It also provided a financial buffer to maintain the agency during the challenging financial crises.

The agency has been extremely fortunate to recruit the right people at the right time during the different phases of its growth. Like any organisation people have come and gone, but the one characteristic which they have all shared is their commitment to the cause of sustainable energy and climate change. Many late nights have been spent writing proposals and completing tasks. Many cups of tea in meetings, with everyone from homeowners to politicians, convincing, confirming, and cajoling people to take the right decisions.

From students on work experience to long term employees, they have all left their mark on the agency and made it is what it is today.

The vision for the future is safe in their hands as we now have over 20 of our own crazy people to get things done!

ph+ | case study | 81

Households all over Ireland are already saving and benefiting from reliable, renewable heating with ecodan air source heat pumps.

h r

Increasing energy bills, the need to reduce carbon emissions and the raft of challenging legislation are driving the demand for alternative forms of domestic heating to improve energy efficiency.

Ecodan can provide modern, reliable renewable heating and hot water and help cut your energy bills. If you're looking to replace your existing heating, our award winning Ecodan system is the perfect solution for a large range of property types.

• Self-contained unit, only requiring water and electric connections • No need for gas supply, flues or ventilation • Low maintenance and quiet operation

QUHZ Outdoor Unit

Call Mitsubishi Electric in Dublin on (01) 419 8800

Air Conditioning

Heating

www.mitsubishielectric.ie 82 | passivehouseplus.ie | Issue 25

Ventilation

Controls

Heating

It’s about challenging the status quo, & fighting fossil fuels

By Tipperary Energy Agency CEO Paul Kenny

I

n December 2006 I joined the energy agency from a large multinational, inspired by the desire to spend more time engineering and make a difference. I had completed a certificate in renewable energy development in Tipperary Institute and was eager to get involved. It’s something that we look for in all staff when we recruit: someone who has a desire to make a difference, someone who doesn’t accept the status quo, someone who doesn’t accept that fossil fuels should be part of our future.

When I started I was introduced to a very different culture of work, a culture of trying to make a difference, a culture of being introduced to the deep end and most importantly a culture where there was no fear of failure. If something went wrong, it was always a case of we’ll do better together the next time. This no fear of failure is one of the key reasons why the agency has delivered innovation, change and some influential projects. This culture of attempting to do things that we weren’t sure we could deliver made, and still makes, Tipperary Energy Agency such a brilliant place to work.

The agency participated in over 30 EU projects, which allowed us to see and touch the types of things that are needed to make the energy transition happen – from district heating in Scandinavia, to biomass boilers in Austria, to the citizen-led energy transition in Germany. This European education has been a bedrock of the agency’s perceived innovations. We have built on this to deliver significant large projects of national importance, to help break the ice on PV, on biomass boilers and on heat pumps, and most importantly making the energy transition a little more mainstream.

Today, with support from the European Investment Bank’s ELENA programme, we have the ability to really ratchet up the investment at home with European help for developing sustainable energy investments across most sectors of the Tipperary economy.

Over the last five years, we have realised that specifying works on a design-build basis was at its limit and wasn’t delivering the standards of works that our clients wanted. It was appropriate for simple works, insulation and shallow retrofit domestic sector. We realised that asking for challenging innovative technical solutions

(left) Tipperary Energy Agency CEO Paul Kenny; (right) SuperHomes participant Aileen McCarthy, who suffers from respiratory problems, says her health has been transformed post retrofit.

from the contracting sector was not going to deliver the potential that the technology could achieve. So from late 2015, we’ve grown our design office to include residential and non-residential capabilities to provide a full end-to-end service – a one-stop-shop development where our staff can do an energy audit, design a retrofit, apply for grant support, procure, project manage, and sign off the investment.

People who wish to embark on the energy transition, make their home warmer, or their business more efficient need support.

The technical engineering solutions aren’t easy, and people need the technical help to deliver high quality projects. There is a second task that we now do, and that is the sales pitch for the energy transition. It isn’t overt, but it’s there. We don’t want people to complete an energy audit and leave it on a shelf, we want people to decide to invest and reduce costs, CO2 and fossil fuel use. Our team always feel that the goal of an energy audit is investment, never just identifying a potential solution.

We developed the Superhomes Deep retrofit programme to support homeowners to move away from cold damp homes heated by fossil fuels. It originally came from the challenge in meeting the decarbonisation targets for Irish homes and simultaneously making them warmer, healthier and cheaper to run. We were being told that heat pumps wouldn’t work in Ireland, and that ventilation through holes in walls was fine (even though we knew it wasn’t). We researched solutions and presented a pilot proposal to our national energy agency, who funded homeowners to upgrade their homes for the last three years.

The next 20 years will require every building to be retrofitted, every citizen to become an active energy citizen and every organisation to decide to move away from fossil fuels. In order to achieve this goal, we will need to have accessible technical solutions but also accessible financial solutions that mixes grant supports, low-cost finance, carbon taxes and the confidence for people to be able to use these solutions. That’s our goal – to figure out these solutions, to try and fail and try again until we have the solutions to scale the energy transition, until it’s available easily for every citizen and organisation.

RICHARD SHERLOCK National sales manager, Mitsubishi Electric Mitsubishi Electric have been strong supporters of the Tipperary Energy Agency Superhomes scheme since its inception. This is a highly important program offering householders a high quality holistic retrofit package which always includes an air source heat pump at the centre of its offering. The program is very important for Mitsubishi Electric and our commitment to the Irish market in terms of demonstrating, publishing and proving the real-life performance of heat pumps in retrofitted Irish houses of all types. The research being conducted at multiple levels – up to PhD – will assist in the sustainable growth of the heat pump sector and assist in no small way in meeting Ireland’s energy saving obligations.

Mitsubishi Electric have supplied the vast majority of heat pumps on the Superhomes schemes to date and we have taken the opportunity to use Ireland as a European research base. There is regular interaction with our European research teams which will help form the base for the next generation of heat pumps we design and manufacture. Conjoined with this research we are also exploring the funding of a PhD researcher in this area with NUIG, which we at Mitsubishi Electric feel further demonstrates our commitment to the Irish market, following 35 years in business in Ireland.

Superhomes is critical to the development of a high quality retrofit offering in the market and in the proving that heat pumps are the way forward in all Irish housing. I hope the results will be listened to and acted upon by policy makers.

ph+ | case study | 83

We are timber frame specialists. That means we manufacture and install timber frame cores using the ďŹ nest technologies to provide

01 23 25 91 7

the structural integrity of a high performance, low energ y home.

email: info@greendesignbuild.ie website: www.greendesignbuild.ie 84 | passivehouseplus.ie | Issue 25

+44 (028) 9083 8951

SIMON JONES Commercial director UK & Ireland, Aereco

Ventilation and retrofit sometimes feel a little like oil and water. The retrofit sector as an industry has struggled at times to deal effectively with the concept and we are already paying the price in some cases.

Tipperary Energy Agency should be credited as one of the early adopters of the concept of designed ventilation strategies for retrofit, and their robust stance on no effective ventilation, no retrofit, is a credit to them. (Specifically this means a fan-driven ventilation system set up to reliably achieve a predictable, acceptable number of air changes).

They have shown the way and many, including state-funded schemes are now following - something I am not convinced would have happened without them.

Their end-to-end approach has driven the take-up of the Superhomes scheme, but their approach to quality assurance has also played a very big part. How many successive retrofits are as a result of the positive feedback from previous participants of the scheme? If any scheme going forward is to succeed and build to the scale necessary, there’s a lot to learn from Tipperary Energy Agency’s approach to quality assurance on the supply chain and the delivery of retrofit projects.

PAUL O’BRIEN, SOLA We first worked with Tipperary Energy Agency on the Serve Project in 2009-2010 – retrofitting solar thermal on existing houses in North Tipperary.

In 2012 we fitted two air source heat pumps for the agency in an outdoor swimming pool in Ballina, in North Tipperary, which is open from June to September. They’ve been hugely successful – running costs of about €30 per day. In another early project with them we fitted PV arrays on nine public buildings. The council saved €30,000 in the first year.

We worked hand-in-hand with Paul Kenny on some of the first jobs – he was out getting his hands dirty commissioning heat pumps to get the COPs to where they should be.

The way the Superhomes grants materialised, you had to be doing a combined fabric upgrade. Their knowledge

Some of the projects supported by the agency over the years including Templederry Community Wind Farm (left) and the 45kW solar PV array on the roof of the Tipperary County Council building in Nenagh (seen here with council CEO Joe McGrath)

Sustainable Tipp – action plan for major CO2 cuts by 2020

R

ecognising the need for immediate and short term cuts in carbon emissions – given the climate change tipping point the world faces – Tipperary Energy Agency has developed Sustainable Tipp, an action plan to deliver energy transformation of Tipperary’s housing, commercial, public and community buildings over three years.

It is an opportunity for communities, farmers, homeowners and business owners to save energy, save money and become more sustainable.

In 2017 Tipperary’s Sustainable Energy Action Plan (SEAP) was formally adopted

by Tipperary County Council. This plan was created following Tipperary’s commitment to The Covenant of Mayors, the world’s largest movement for local climate and energy actions. This plan explains the steps

and the way they manage the design process gave us the confidence to start acting as main contractor, and subbing in the insulation works to specialist subcontractors. It’s broadened our spectrum of work, and we’re now able to act as a main contractor on retrofits and extensions.

We have peace of mind if Tipperary Energy Agency spec out a house – we know the heating system won’t be undersized. They do an itemised bill of quantities. If the house is done to the spec they provide there’s no issue with the heat pump performing. They do all the heat load calculations room by room. They have a good team.

We love the challenge of deep retrofit.

People are living in the house before we start and they can see the transformation afterwards. Working with the agency gave us the confidence that we could branch into other areas. Only for them, we wouldn’t be where we are today.

that need to be taken to reduce Tipperary’s CO2 emissions by 30% by 2020.

That same year, Tipperary Energy Agency, announced that the European Investment Bank (EIB) is to support the actions of the SEAP. This action plan includes 32 actions which will reduce Tipperary’s energy related CO2 emissions by 2020. These actions cover a wide range of sectors including agriculture, education, planning, residential, local authority and the commercial sector.

Following the approval of the SEAP for County Tipperary and the support from the European Investment Bank, Sustainable Tipp was born. Sustainable Tipp will endeavour to keep Tipperary citizens up to date on the actions and progress of the SEAP, as there are opportunities for everyone in Tipperary.

The main objectives of Sustainable Tipp are: • To promote and encourage greater energy efficiency in Tipperary • To reduce Tipperary’s dependency on imported energy by encouraging renewable developments • To create employment through the deployment of renewable infrastructure and widespread energy efficiency upgrades • To reduce energy poverty • To ensure that small and medium sized businesses are made aware of the financial rewards associated with increased energy efficiency • To raise awareness of Tipperary’s obligations and opportunities in renewable energy and energy efficiency • To foster the opportunities in energy efficiency and production in the agricultural sector • To facilitate greater capacity building within all associated institutions. 

ph+ | case study | 85

The PH+ guide to

INSULATING CONCRETE FORMWORK As demand for super-insulated and airtight building structures grows, insulating concrete formwork (ICF) is rapidly gaining popularity as a method of construction.

But what exactly is ICF, what are its key advantages, and why is it so well suited to passive house and low energy construction?

Words by John Cradden

Insulating concrete formwork involves a structural shell of insulation, usually polystyrene, into which concrete is then poured.

Seen here are systems from Econekt (left) and Integraspec (right) under construction.

I

nsulated concrete formwork is a method of building construction using lightweight and hollow insulation forms that fit together and are then filled with concrete. Once set, the concrete becomes a high-strength structure and the formwork remains in place as thermal insulation.

It’s actually been around since the 1970s in some countries, but in the intervening decades it has largely remained a niche choice, perhaps suffering from conservative tendencies in a sector reluctant to move away from traditional cavity wall construction, and from regulations which have placed little emphasis on superinsulation, airtightness and thermal bridging. ICF has tended to be the preserve of customers who want a high-quality construction with low running costs and aren’t just thinking about building as cheaply as possible.

But, of course, thanks to the demand for greater new-build energy efficiency, ICF has come much more into focus within

86 | passivehouseplus.ie | Issue 25

the construction industry in recent years, including in the passive house sector. This is because by definition it offers excellent insulation and airtightness performance. There are several suppliers now established in Ireland and the UK. Pros ICF is certainly finding its advocates among energy-conscious architects and designers thanks to certain advantages that enhance its thermal performance, including inherent airtightness, the virtual elimination of thermal bridging and the fact that its advertised U-values are reliably achieved. There’s a simple logic behind this: when the insulation is serving as formwork for a concrete pour, the insulation has to be unbroken, or the formwork simply won’t hold the concrete. But it’s not just the presence of the insulation: it’s the fact that the concrete sets in direct contact with the insulation, and therefore delivers both airtightness and prevents thermal

looping from undermining insulation performance.

The significance of this can’t be overstated.

Studies have shown that gaps in insulation can dramatically undermine U-values. Insulation testing of a cavity wall with 50mm of XPS insulation in the cavity – with a 10mm gap to the inner leaf and 40mm gap to the outer leaf – showed that a 3mm gap between the insulation boards increased the U-value from 0.34 to 0.54 W/m2K, whereas a 10mm gap increased it to 0.65 W/m2K, as the thermal performance was undermined by natural convection.

In contacting most of the ICF suppliers in the Irish and UK markets for this article, it became quickly apparent that most companies were able to reel off projects showing remarkably low heating costs, even in some instances in spite of relatively modest U-values — as the mini case studies alongside this guide demonstrate.

Thermal bridging guru Andrew Lundberg of Passivate says that passive house designers are

ICF systems under construction from (left to right) Amvix, Logix and Polarwall.

generally agnostic when it comes to construction types because the focus is primarily on energy conservation, but says that ICF performs particularly well for passive house applications because insulation continuity is guaranteed at all standard junctions, and at good thicknesses.

“Some system suppliers have also taken the positive step in having catalogues of standard details and related psi values and fRsi values developed for their systems as part of their Agrément cert applications, and that offers them currently a unique or rarely seen selling point, as well as demonstrating the performance of their systems and removing any guesswork. That also saves significant cost for people looking to build with those systems.”

Skills ICF is a very different method from traditional masonry construction, with some saying the skill set required is more akin to carpentry than blocklaying. There may not be many experienced ICF builders around, but it may be inevitable that more builders incorporate the method into their skillsets given the combination of quick build speed and high performance it offers, in a market where energy performance standards are rising exponentially.

While the UK market has been served by an Insulation Concrete Formwork Association since 1992, in Ireland it’s another matter. The

Irish Concrete Federation is in the throes of setting up a separate body within its organisation to better represent the views of the burgeoning ICF industry in Ireland, and to promote standards as well as selling its benefits. Part of this plan will include devising training and upskilling programmes for its members, according to its CEO, Gerry Farrell.

Raw materials While ICF certainly has its advocates, others may baulk at the fact that it typically comprises two materials which can have comparatively high environmental impacts: ready-mixed concrete and polystyrene. Both materials have relatively high embodied carbon emissions, although the question of how green ICF is may need to be based on a systematic sustainability assessment of the whole construction.

Such an assessment could determine the embodied CO2 of a material, among other parameters, including a full life cycle analysis.

In its favour, ICF starts with the advantage of comprising fewer materials than other construction types, and there are various suppliers of both concrete and EPS who are manufacturing using recycled materials, including GGBS (ground granulated blast-furnace slag), a low carbon “green” cement derived from recycled steel industry waste.

Then there’s recyclability. The materials typically used to manufacture ICF – EPS, concrete, plastic ties and steel rebar – typically lend themselves to recycling once the building

reaches its end of life, which was a significant factor in Irish firm Amvic gaining a BRE Green Guide rating of A+ on its system.

It’s also important to compare like with like.

While an ICF wall contains a relatively large amount of (typically polystyrene) insulation, a fair comparison would have to include other wall types achieving the same performance – which in terms of traditional construction, for instance, would involve similar quantities of insulation, plus thermal breaks and the materials to construct inner and outer leafs.

The vast majority of construction projects use significant elements of synthetic insulations which are oil-based or derivatives.

Velox is one ICF manufacturer that normally eschews EPS in favour of a structural wood/ cement, but also offers versions with EPS or platimum EPS. Polarwall uses exclusively XPS (extruded polystyrene), which it says has a better thermal performance than EPS and therefore reduces the overall wall thickness, helping to increase the internal living area.

North American manufacturer Nudura’s system offers credits under the USGBC’s LEED environmental rating system, scoring highly for energy performance, while also offering credits for its use of 100% recycled polypropylene and steel folding webs, which the company says enables the cavity in the formwork to be closed during transportation, enabling up to 40% more material to be transported.

(left) Velox’s unusual spin on ICF, in this case with additional platinum EPS insulation fixed to the structural wood/cement formwork; (middle) the Polycrete ICF system – in another example of ICF being used below ground level; (right) the Nudura ICF system going up like Lego.

ph+ | guide to | 87

Ultimately, if your main sustainability focus is energy consumption in use, then there is a wide range of construction types, including ICF, that would be perfectly suitable for low-energy, nZEB and passive house projects.

“If your main concern is sustainability, embodied energy and CO2, then you’re into a much narrower range of product which unfortunately comes at a price premium that the mass market aren’t currently interested in paying,” says Lundberg.

Compatibility In terms of the compatibility of ICF construction with a variety of other building methods, a number of suppliers we spoke to say that there are no issues with using ICF in combination with strip or other insulated foundations.

“ICF works perfectly with any foundation system – be it strip, concrete raft or insulated raft, they provide no problems. Even in basements there is no problem as long as the tanking of raft and walls are properly addressed,” says Dony Kelly of Thermohouse.

ICF is also proving a solid option for hybrid constructions where it forms the

basis for the ground floor – or basement – with a different structure on the top, such as timber frame. But it can also be used for buildings that go as high as 20 storeys, although some systems may have lower limits depending on a variety of factors.

Fire Concrete is among the best performing materials in the event of fire, meaning the concrete structure of ICF lends the system inherent fire safety advantages. ICF systems typically offer between two and four hours of fire resistance, with greater resistance achieved by walls with wider concrete cores.

Meanwhile manufacturers point out that the insulation used in ICF is manufactured with flame retardant additives. ICF is also typically finished with cementitious renders externally – though a broad range of finishes are possible, including brick and stone slips from specialist suppliers such as Monolith, and rainscreen cladding – and plasterboard internally.

It’s understood that some multi-storey ICF constructions on the continent have

been built with no firebreaks. Although this may raise some concerns for high rise applications given the scrutiny being applied to different construction approaches in response to the Grenfell tower disaster, the fire performance of an external insulation layer fully encased behind a cementitious render system can’t be compared to a ventilated rainscreen cladding system – let alone one with a polyethylene core.

It’s also reassuring to know that most suppliers will happily engineer firebreaks in, horizontally between each floor and vertically within the exterior insulation. Dony Kelly of Thermohouse says it is crucial that firebreaks must be in contact with the concrete core, so the EPS must be removed before the firebreak is installed. Velox, however, says that there is no need for separate firebreaks with its system because the formwork is made out of fire resistant material, but can fit them if required.

In terms of size, ICF walls range in thickness from 120mm (the absolute minimum permitted by the Eurocode standards) to 300mm. In a nutshell, a standard wall will

ICF and thermal mass S

uppliers and advocates also point to the benefit of a long ‘decrement delay’ with ICF — i.e. that it can slow temperature changes by absorbing and releasing heat slowly — because its concrete core offers high thermal mass.

The benefit of having a high thermal mass is that it can moderate internal temperatures and delay the time at which peak temperatures occur. In practical terms, the theory goes that this means that the building should have lower winter heating requirements, along with a lower risk of overheating and less demand for air conditioning in summer.

However, there are still some grey areas in terms of the understanding of thermal mass in general, and in the thermal mass properties of systems such as ICF, with some research that ICF’s thermal mass is high, and some suggesting it is relatively low.

But even if the thermal mass of ICF is low, it may not be a bad thing. In low energy buildings, both thermally massive and lightweight structures can be prone to overheating. If too much heat is allowed to accumulate into thermally massive materials, they may simply take too long to cool down.

But the thermal mass effects of ICF – like many other construction methods – depends on its exact configuration, including what materials are used internally and externally. The local climate is another factor, too.

The conventional wisdom is that ther-

88 | passivehouseplus.ie | Issue 25

mal mass needs to be exposed to have an impact, which is why the likes of exposed concrete slabs have long been a common feature as a passive cooling strategy in office buildings. This effect is undermined somewhat if you apply plaster or plasterboard, and possibly even more so if insulation is placed between the room and the wall’s concrete structure.

When it comes to ICF, you will typically have a mix of very high-density concrete with very low-density expanded polystyrene. “When low heat capacity materials [like polystyrene] are exposed to heat sources, whether it’s solar gain or internal heat sources, you will get a relatively significant increase in temperature in those materials for relatively little heat input,” says Andy Lundberg of Passivate.

So from a cool state, an ICF home will have a relatively rapid response time to indoor heating, compared to exposed heavyweight structures. This also means that solar gain on the external facade can heat up the outer EPS layer quite significantly — but the effect of this on the internal environment is diluted by the heavy thermal mass of the concrete core.

In solid constructions without cavities this balance can be very important in maintaining comfortable environments, Lundberg says. But these effects can be significantly altered by internal liners, eg skimmed & painted plasterboard on a service cavity, and external render systems, which can feature dark absorbent colours

or highly reflective finishes.

“We are now at a point where each project should be examined in isolation to ensure that the wall build-ups, including external and internal finishes, work for the specific building in its location and environment. We have the knowledge to do this, and not an excuse in sight not to.”

“However, once these inner and outer layers are covered by either external renders, or ventilated cladding systems, or have an internal service cavity installed or even just plasterboard fixed directly to the system, everything changes,” says Lundberg, adding that this is equally true for a cavity wall construction.

“So the key point is, there is no right or wrong when it comes to thermal mass and what’s exposed and what’s not. Every building is different and will perform differently.”

So figuring out the best solution for each project would require focusing not just on calculating heat losses using steady-state U-values and looking at the overheating risk if needed, but also at the best use of thermal mass effects – including decrement delay – in order to bring out the best in the materials. Lundberg says: “On some projects that may involve exposing thermal mass, and on others may require burying it behind lighter materials. It all depends on what the specific project needs.

“It’s the next step in trying to model buildings more accurately for the as-built condition, but we’re just not there yet.”

typically be 150mm thick, but 200mm or more is better to combat the shear forces, building loadings and wind forces associated with taller buildings.

Speed of construction One of the advantages of ICF over block-building and other methods – as long as experienced builders are involved – is the speed of construction. A typical house can be built at a rate of a single storey per week.

Velox’s benchmark is eight working days with three men to build a two-storey 42 sqm detached council house from slab to wall plate, all concreted.

Naturally, others say that speed depends on a number of factors. Serge Mellieur, who heads Canadian ICF supplier Polycrete, said: “Normally if you have a good working team and good planning, our construction system is faster than anything else, because we cover the structure and the insulation at the same

time with the same team of workers. But never forget that quality of construction has to be your first goal before speed.”

There are no reported issues with interstitial condensation which, given the claims for ICF regarding the elimination of thermal bridging, is as it should be. The key factors here include good airtightness, mechanical ventilation, and having the correct balance of insulation so that the dew point is kept towards the outside of the structure.

Three year old passive house, Dunmore East, Co. Waterford

F

eatured in a case study in Passive House Plus not long after it was completed in 2015, quantity surveyor John Carney’s passive house on the windswept but sunny Waterford coast has now been occupied for almost three years. According to Carney, the house – built using the Amvic ICF system – has been working a treat.

“The beautiful thing of this house is that every part of it is comfortable,” he says.

Placing faith in the fabric firstbased design’s ability to reduce the need for active heating in spite of its exposed location, Carney opted to reduce capital expenditure on a heating system by going all electric.

The only active space heating input comes from direct electric heating, including electric underfloor heating in the main living area, and electric fires in the kitchen and living room – seldom-used, as they quickly cause the rooms to overheat – in addition to electric heaters in some rooms, including bedrooms. “We’ve never used the heaters in the bedrooms,” he says. “It does require heat though.” When Passive House Plus

previously covered the house, the plan was to use one electric storage heater on night rate electricity as the main heat source for the 245 sqm house. “It was giving too much heat in the morning when we didn’t need it and not enough when we did, so we put in a Dimplex programmable heater instead.”

The performance has been impressive. PHPP calculations predicted a primary energy total of 104 kWh/m2/yr for all energy use – including everything from the energy to run the electric gates, outside lights, septic tank and appliances. The actual use has averaged 84 kWh/m2/yr.

The house is home to empty nesters Carney and his wife Bridget, along with occasional guests. “We have returning fledglings – with their extra fledglings from time to time,” says Carney, whose Berlin-based son and New Jersey-based daughter and their respective broods added six occupants when Passive House Plus made contact for this piece. “They were visiting friends locally. When they came home to the passive house, they noticed the comfort –

even though the other houses had stoves, and we have none.”

The Amvic system helped Carney – who recently retired from lecturing at Waterford Institute of Technology but still works as a quantity surveyor and project manager – to avoid thermal bridges and achieve high levels of airtightness, with the help of a Siga airtightness membrane and tapes.

The house scored an impressive test result of 0.33 ACH at 50 Pa, though Carney notes issues with an external door warping would likely mean more leakage if the building was retested.

100mm of Neopor insulation was added externally to drop the total wall U-value to 0.13 W/m2K. The Carneys own two other homes on the land – a small thatched cottage that served as the original family home, a passive solar-designed house built by Carney, and the new passive house – and all three are being monitored for temperature and relative humidity, with the cottage and 1990 house seeing large swings in temperature and humidity. “The passive house is much more stable” he says.

ph+ | guide to | 89

NZ Sche M EB me ulti FU s n Un TU ow it RE on PR Sit OO e FE D Insulated Concrete Forms - A Rated Structures

• High Performance REINFORCED CONCRETE Homes • A One Stop Solution that Easily Meets or Exceeds Building Regulations for Structure, Insulation, Sound Resistance, Fire, Airtightness and Thermal Bridging - all as standard, at no extra cost • New Amvic ICF 300 Form available now, offering o U-Value: 0.20W/m²K, o Y-Value: 0.02, o Air Permeability: <2m³/h.m² • Sound Resistance + 58DnTw. • Fully Certified and Approved • Cost Competitive, Rapid Build • For Self Build, Housing Schemes, Apartments, Commercial, etc.

Amvic Ireland, Naas, Co Kildare.

045 889276

www.amvicireland.com Made in Ireland

PASSIVE HOUSE PERFORMANCE - TRADITIONAL BUILD COSTS 90 | passivehouseplus.ie | Issue 25

The Curly House, West Sussex

B

uilt on a particularly exposed site near Chichester where winter temperatures plummet all too frequently – down as low as minus sixteen – the award-winning Curly House had to overcome several challenges. Sited in an Area of Outstanding Natural Beauty in a National Park and with all of the planning restrictions that brings, the clients wanted a contemporary design and a particularly warm house – perhaps a response to the boneshakingly cold, poorly extended cottage that previously sat on the site.

And the resultant house – named The Curly House in reference to the local vernacular of sweeping flintwork walls, and with a flint-clad curved façade to the rear – is an exceptional example of how low energy architecture does not necessarily equate to design limitations or ‘inside of the box’ thinking.

The clients wanted the 421 sqm home to have year-round comfort with minimal reliance on fossil fuels and the

national grid. Architects Ecotecture produced a crescent-shaped design to enable the house to track the winter sun, but with a large expanse of brise soleil to ensure that winter cosiness wasn’t achieved at the expense of suffering in the summer heat. The design responds cleverly to the sloping site, chiefly in single storey, form but with a lower storey section to the east cut into the site.

Taking all of these challenges on board – and the need to minimise air leakage and thermal bridging for the project’s passive house-inspired approach – the Nudura insulating concrete formwork system was selected, combined with the OpDeck insulated concrete flooring system.

Passive house-certified Optiwin windows were also chosen for their high performance, while the house, built by Kithurst Builders – is ventilated efficiently and effectively by a heat recovery ventilation system from Green Building Store.

Pre-completion airtightness testing

showed that the recipe had worked extremely well: the house scored 0.20 ACH @ 50 Pa – three times lower than the stringent passive house requirement, and the lowest result an Ecotecture project had ever achieved, in spite of the complexity of the design. According to Nudura and Ecotecture, all other construction methods considered for this design would have thermal bridging and bypass issues local to the shading devices. Nudura’s ICF system eliminated these issues and was key to the radical design’s success.

Energy monitoring was conducted of the completed dwelling in the first year post-occupancy, and shows that the final energy use for space heating and hot water totalled under 30 kWh/ m2/yr, a figure that would have been closer to 35 without the solar thermal array. That figure looks good at first glance, but it looks even better if you consider it’s for a house that the homeowners keep ticking over at 24C all winter.

ph+ | guide to | 91

TO FIND OUT MORE CALL +353 (0)1 678 1800 OR VISIT www.ecocem.ie

01 685 6000 • fZEB Rffdy • BfAR fomfliffff • foufd Tfs�ff • Aif Pffssuff Tfs�ff • Lffd Rffisffy Mffs • Thffmfl Bfidfiff fflfulf�ofs • Buildiff Rffulf�of fff�fiffffs • BER ffffs Domfs�f ffd fommfffifl

Registered BER Assessors

Navan & Dublin T: 01 685 6000 Anna@BERcerts.ie www.BERcerts.ie 92 | passivehouseplus.ie | Issue 25

Suppliers of

ffffffffffffffff and

ffsulfffd Rf�s To nd out more call - 057 868 0684 or email - info@castleforms.com

Sleek Tipperary home with promising monitoring result

A

rchitect Donal Ryan’s new low energy home in Thurles, Co. Tipperary attempts to marry design and passive house principles, a fact that’s manifest in its minimally-glazed yet striking north-facing façade.

Completed in December 2015, the house consists of 276 sqm built over four levels, a challenging build that Ryan selected the Integraspec ICF system to construct.

The lowest part of the building sits on an insulated slab foundation system – with a U-value of 0.13 W/ m2K – while elsewhere a suspended ground floor hits a more modest 0.20 W/m2K, and the building’s flat roof, built to accommodate an extensive green roof systems – hits 0.14 W/m2K. The ICF walls are built to comparatively modest U-values for an Irish new home – the walls hit the Part L backstop of 0.21 W/m2K. But that’s ignoring the fact that thermal bridging is all but eliminated, and the house scored a commendable airtightness test result of 0.86 ACH at 50 Pa. Meanwhile Munster Joinery triple glazed alu-clad windows and entrance door hit U-values of 0.85

and 1.1 W/m2K respectively.

The house is heated via Daikin Altherma air-to-water heat pump, combined with a Nilan heat recovery ventilation and hot water system, with a minimally-used 8 kW Stovax room-sealed wood burning stove added in September 2017. Ryan installed energy meters to the Daikin heat pump and Nilan system in August, and when Passive House Plus saw the initial data in February, the results looked promising: from September to January, the heat pump used 1,944 kWh of electricity at a cost of €138.56 – a commendable result for a five month period that took in a large chunk of the heating season. Meanwhile the Nilan unit has used even less energy for hot water and powering the ventilation system in the same period – just 1,386 kWh. Ryan, who shares the home with his wife and newborn baby, estimates the total energy use over 12 months to be approximately €1,300, with typical household electricity use dwarfing the home’s heating and hot water costs.

Next issue...

The PH+ guide to:

Foundations What’s the difference between different types of foundations, how should they be insulated, and what systems on the market work best for passive houses? Our next guide will look at designing and building super-insulated foundation systems that are free of thermal bridges, and ideally suited to passive and low energy dwellings.

ph+ | guide to | 93

Marketplace Fresh-r wins passive house component award T

(inset) Passive House Institute founder Dr Wolfgang Feist gives the component award to Fresh-r marketing director Edward Hissink and lead engineer Hans Arentsen.

he Dutch company Fresh-r has won the passive house components award at the 22nd annual Passive House Exhibition in Munich, for its decentralised residential ventilation system. Fresh-r worked together with the Scottish firm Collective Architecture on its submission for the award, which was presented at this year’s international Passive House Conference.

“Two years ago, Fresh-r won the second prize, in the category for energy retrofits. Then it was a novelty, with a very narrow yet powerful heat exchanger that fits in the outer wall. Now it won the first prize, in the category new residential building. Because we think this should be the norm for layered construction,” Dr. Wolfgang Feist of the Passive House Institute said in handing over the prize.

The award jury found the collective submission by the two companies “the most effective way of ventilating with heat recovery, where comfort is assured at the lowest price, without wasting energy,” a statement from Fresh-r read.

It continued: “Fresh-r is like a breathing window. It is the smallest, simplest, smartest and most energy efficient ventilation with heat recovery. Because it uses copper to transfer the heat from one air stream to another. As a result, much wider air flows are possible, so that there is no pressure drop in the heat exchanger. Therefore, less power is needed. Less space. Less noise.”

Edward Hissink of Fresh-r commented: “To take the stage at an exhibition where the world’s pioneers in energy neutral construction are all together, to receive the first prize, feels great.”

Fresh-r shared first place at the awards with ventilation manufacturer Pluggit. •

Ecological launch range of new airtightness products

E

cological Building Systems have announced the launch of the new pro clima products Tescon Sprimer, Aerosana Viscon and Roflex Solido to the Irish and UK Markets. These new airtightness solutions “expand pro clima’s market leading range of high quality sealing systems for inside and out”.

Tescon Sprimer is a sprayable primer for wood, wood-fibre boards, masonry, roofs, walls and ground slabs. After the primer has been spray-applied, pro clima adhesive tapes such as Tescon Vana, Contega Solido and the Extoseal range can then be applied.

Tescon Sprimer is easy to apply and saves installers precious time on site, according to pro clima. It also secures bonds, penetrates deep, and strengthens dusty substrates or surfaces with insufficient load-bearing capacity.

Aerosana Viscon, meanwhile, is a sprayable or paintable airtightness sealant with a humidity-variable vapour

94 | passivehouseplus.ie | Issue 25

resistance. Viscon is a high quality, water-based acrylic dispersion paste which can be applied as a spray or using a brush. The sprayed-on liquid film forms a seamless, elastic airtight and vapourresisting protective layer once it has dried. It can be plastered or painted over, used for strengthening subsurfaces in the case of renovation, and is suitable for use indoors or in protected outdoor areas.

Roflex Solido is a plasterable airtightness EPDM grommet that features full contact solid acrylic adhesive. Pipe penetrations through masonry walls often lead to considerable air leakage, but Roflex Solido can be bonded directly to masonry walls and is suitable for internal or internal applications. Even when pipes are pushed or pulled at a later stage, an airtight and weathertight seal is still retained.

For more information regarding the products mentioned above visit www. ecologicalbuildingsystems.com. •

(above) Tescon Sprimer, Aerosana Viscon and Roflex Solido have been introduced into Ireland and the UK via Ecological Building Systems.

Quinn launches free CPD on single leaf masonry

Daikin pick up five iF design awards

Q

uinn Building Products has announced a new free CPD (continuous professional development) offering for those in Irish construction, entitled ‘Single Leaf Masonry - A Modern Method of Construction?’

A series of open house regional seminars are scheduled throughout Ireland, and available to book via the Quinn Building Products website.

The Quinn technical team will be joined by the Sto team at many of the regional seminars for an additional CPD seminar on external wall insulation systems.

The content of Quinn’s new seminars focuses on single leaf masonry construction, and how this can contribute to rapid build construction while improving building performance.

Attendees will also learn how single leaf masonry construction can reduce construction costs when compared to other rapid build solutions. The seminar will demonstrate how passive house and nZEB standards can be achieved using single leaf construction, while delivering improved thermal and structural performance.

An outline of the seminar content includes the history of single leaf masonry in Ireland; the importance of effective insulation; historical problems with single leaf masonry; single leaf versus cavity wall construction; advancements in single leaf masonry – ETICS; aircrete and solid masonry construction; and thin joint technology.

This seminar will be complimented by Sto’s external wall insulation CPD, which will help architects and construction professionals to understand external wall insulation systems, the different types available, and how to specify them correctly.

Declan Loane of Quinn’s technical team said: “With increasing demand for better housing, faster, everyone in the construction fraternity is tasked with finding solutions which will deliver just that. As major industry suppliers, we have a responsibility to deliver solutions to meet these demands, and to work with all stakeholders to ensure the best use of our products through a fabric first approach to improved building standards.”

Following the launch of Quinn Building Products’ newest offering, SIMS by Quinn, the seminars will help those interested in using this rapid build solution and provide the opportunity to discuss projects with members of the Quinn and Sto technical teams.

Full details of upcoming seminars and online booking facilities are available at www.quinn-buildingproducts.com/CPD. •

(above) Thermal bridging expert Andrew Lundberg of Passivate at a Quinn Building Products event in 2017.

(above) Daikin’s new wired remote controller, which is available in a range of colours, was one of five Daikin product winners at the 2018 iF Design Awards.

T

his year’s prestigious iF Design Awards saw Daikin Europe’s design skills recognised as the company scooped five awards for their residential heat pump and commercial control solutions at a ceremony in Munich on 9 March.

The iF Design Awards are among the largest and most prestigious design competitions in the world. Organised by the world’s oldest independent design organisation, Hannover-based iF International Forum Design GmbH, the awards are now in their 65th year.

This year there were over 6,400 entries submitted from 54 countries, with 63 judges scrutinising the products over three days.

Patrick Crombez of Daikin Europe said: “We are delighted to receive these awards which serve as testimony to our goal in delivering stylish, aesthetically pleasing products that harmonise with their surroundings while delivering everyday comfort and energy efficiency.”

The Daikin products to receive the iF Design Award were the Altherma 3 floor-standing heat pump, Altherma wall-mounted heat pump, D2CND gas condensing boiler, Stylish air conditioner and the company’s commercial wired remote controller.

Daikin’s third generation low temperature Daikin Altherma 3 is the first air-to-water heat pump powered

by the manufacturer’s patented Bluevolution technology. The unit combines high efficiency compressors with R-32 refrigerant and features frost protection down to -25C. With all the advantages of the Daikin Altherma 3 series, the Altherma wall-mounted heat pump’s slim dimensions mean it can be integrated with a standard domestic hot water tank to save a significant amount of space. The addition of a thermal store system with thermal control panels also provides low cost on-demand hot water.

The DC2CND is a compact wall-mounted gas-condensing boiler designed for the smallest of spaces and offers increased flexibility in use, with freeze protection for pipes too.

It offers efficiency of up to 108, and a modulating range of 3- to 24-kW with automatic capacity adjustment.

The compact wall-mounted Stylish features all-new component designs and R-32 refrigerant, and guarantees the highest efficiency in its design class, scoring up to A+++ for both heating and cooling.

Daikin’s latest wired remote control has been designed to provide an enhanced user experience with an elegant and contemporary appearance.

Its intuitive touch button controls make it easy to adjust settings to suit your personal comfort. •

ph+ | marketplace | 95

Brink launches new MVHR unit with range of features Energy consultant Cillian Donoghue’s retrofit project will aim to boost this derelict bungalow from a G to an A3 rating with emphasis on a fabric-first approach.

G-rated Meath bungalow aims for A rating — without renewables

E L

eading mechanical ventilation with heat recovery (MVHR) manufacturer Brink Climate Systems has launched a new high efficiency MVHR unit, the Flair 325.

According to the Dutch company, the new range comes with some exciting new technologies to boost efficiency, ensure correct ventilation rates and enable easy operation.

The new unit includes highly efficient EC constantflow fans, fitted with rotating vane anemometers; TFT colour touch-screen for easy programming; 100% bypass of the heat exchanger when in summer bypass mode; guided vanes for equal airflow over the whole heat exchanger; a new condensate connection, with special ball syphon included; and a pre-heater with a larger surface and new aerodynamic design.

Brink has used constant flow fans in MVHR units since 1990, employing software that monitors changes to airflow in a system. This adjusts the fan speeds accordingly, ensuring that the dwelling is ventilated at the correct rate, with the fans working at optimum efficiency and airflows equally balanced.

The unique design of the constant flow fans in the Flair 325 MVHR unit have been manufactured to Brink’s specifications and provide

96 | passivehouseplus.ie | Issue 25

an even more accurate control of the airflow. This is achieved using an anemometer fitted to the discharge tube of each fan that enables a fast and very precise response to airflow requirements.

The integrated digital programmer enables a system to be commissioned easily with balanced airflows (as an unbalanced system can swiftly loose thermal efficiency and cause pressure differences between the internal and external environments).

The Brink Flair 325 includes a redesigned heat exchanger with vanes guiding the airflow over the whole surface area of the heat exchanger. This design feature provides a laminar airflow to the heat exchanger, giving an even distribution of air through the heat exchanger for higher thermal efficiency and lower pressure loss (Pa).

The Brink Flair 325 is currently undergoing testing at a number of European institutes including the BRE and Passive House Institute - initial reports indicate marketleading results.

Brink products are available from Kernohan Distribution in Ireland and CVC Direct in the UK. •

(above) A close-up of a flow fan from the Brink Flair 325 MVHR unit.

nergy consultant Cillian Donoghue of BERCerts. ie is currently undertaking a retrofit project that will transform a neglected G-rated bungalow in Co Meath into an A-rated dwelling, using a fabric-first approach and without the use of renewable energy.

“Newly built homes typically meet compliance through renewables placed in the fabric, rather than the fabric itself. So an A-rated home is really a B-rated home, with renewables added,” Donoghue said.

“In 10 or 15 years time, many of our newly built homes — which all comply with buildings regulations now— may start needing to replace their heating systems, which may be defunct or out of warranty.

“Let’s say we all go out and install a 400% efficient heat pump then. All of the A3 houses that rely on renewables now will still have an A3 rating, whereas my ‘dumb’ building will get an A1. While a smart building or home is full of expensive ‘bling’, a dumb building is efficient by itself, or by its envelope.”

He continued: “While renewable energy is both positive and necessary, it should be considered lastly, and this concept seems to be lost on many. Because of this, too many new homes are over specifying renewable systems.”

“The sizing of a heat pump should only be considered once the envelope has been specified properly. In the field this seems not to be the case as it is based purely on size of the dwelling. My bungalow would have a vastly oversized system if I allowed a heat pump to be sized for it based purely on floor area or volume.”

Donoghue’s retrofit in Navan will include ground floor excavation and insulation, internal and cavity wall insulation, removal of chimneys and flues, and remodelling of the internal layout for solar gain. It will also include demand controlled ventilation and a target airtightness of 1m3/hr/m2 at 50 Pa. Careful detailing at junctions and other thermal bridges has been crucial to getting the house up to an A-rating, he said.

BERCerts.ie is a comprehensive energy consultancy that offers BER certs, airtightness testing, sound testing, energy audits, assigned certification and thermal imaging, as well expert advice and consultancy on Parts L, E (sound) and F (ventilation) of the building regulations, and on nZEB compliance. •

Quality EWI installation crucial for success of deep retrofit — MBC Project

Ecocem managing director Micheál McKittrick alongside the company’s new logo.

Ecocem rebrand with new logo and slogan

E

(above) Graphite-enhanced KABE Therm EPS boards installed properly using a fivepoint fixing pattern.

M

BC Project has warned that poor quality installation risks undermining confidence in the growing external wall insulation (EWI) industry — seen as crucial for bringing Ireland’s housing stock up to modern standards of energy efficiency. Dublinbased MBC Project supplies KABE Therm external insulation systems, which include EPS and mineral wool boards.

“While all EWI systems are installed in more or less the same way, according to NSAI standards, there are a few variations on this — predominately these would be around fixing patterns, essentially how the mechanical fixings are distributed across the surface of the insulation,” said Barry Boyce, senior technical advisor with MBC Project.

Boyce said that MBC Project’s standard approach for a typical EPS insulation board measuring 1,000 x 500mm is to install one fixing at the centre of the board, and one at each point where it meets the adjoining boards, creating a five point pattern of distribution, with an even distribution of fixings. This equates to about six fixings per square metre.

This is regarded as an ideal rate of fixing to ensure the board remains fixed, but Boyce said that using less fixings could potentially lead to insulation boards cracking at junctions if subjected to wind loads, and that this could potentially show through the render.

“In reality, on many projects you often see

the bare minimum of four fixings per square metre,” Boyce said. He said this approach is often taken on site to reduce the time needed installing fixings, and to reduce the quantity of fixings required.

He continued: “Another area where there’s potential for corners to be cut is with adhesives. Generally there are two methods of fixing external insulation with adhesives, one is where you cover the board 100% with the adhesive, but that’s usually only applicable when the wall surface is very smooth and level.”

“More common than that is where you apply a strip of adhesive around the edge of the board and then dabs of it in the centre, so around 60% of the board is ultimately covered. But quite often, you see installations where the strip around the edge has not been applied, so you only have 40 to 50% coverage.

Once something like that is done, it’s very hard to check without ripping the insulation off the wall. It’s easy to hide.”

Boyce told Passive House Plus that the KABE Therm range includes a variety of EPS types, including graphite-enhanced EPS, high-density hydrophobic EPS, and a breathable open-cell board. Along with traditional acrylic renders, the company is also now offering polysilicate renders, which Boyce said deliver the same quality as silicon renders — including stain resistance, breathability and low maintenance — while offering better affordability and greater durability. •

cocem, Europe’s largest independent specialist producer of key low carbon building material GGBS (ground granulated blast-furnace slag) cement, has announced a re-brand with the launch of a new logo and tagline.

A statement from the company, which has a capacity of 2.4 million tonnes, read: “Significant developments in the organisation have seen a growing interaction across its operating regions in Ireland, Holland, France, the UK and Sweden, as well as the emergence of new product opportunities following three to four years of innovation work. In order to capture this change, Ecocem is rebranding across the group.”

Ecocem Ireland operates a purpose built manufacturing facility in Dublin Port from which it services the bulk market in Ireland and the 25kg bag market in Ireland/UK. The company’s statement continued: “At the heart of the Ecocem brand is the concept of high quality and precision. The monogram of the letters “eco” come together in the company’s new logo, representing the various stages of a project and underscoring the company’s focus on innovation and sustainability, giving rise to the tagline – Innovation Powering Sustainability.”

The company said that new product innovation opportunities will target areas as diverse as readymix, dry silo mortars, tile adhesives, screed, shotcrete, precast, roof tiles, piling and soil stabilisation. Many of these opportunities will be in areas that perhaps have not traditionally seen the benefits and usage of GGBS heretofore.

Micheál McKittrick, Ecocem Ireland’s managing director commented: “The rebrand of Ecocem Ireland heralds an exciting period ahead where we will bring targeted product solutions to customers across Ireland and the UK.” •

ph+ | marketplace | 97

THE DEVIL

is in the details PH+ HELP DESK

The use of properly calculated, well executed thermal bridging details can make it much cheaper and easier to achieved good energy ratings and comply with tightening building regulations. But these benefits can only be realised if buildings are designed and constructed in accordance with the details – which requires great care – argues Simon McGuinness.

T

he Accredited Construction Details (ACDs) were first introduced for a 15mm overlap of insulation on the outside of the frame without in the UK in 2007 and as Acceptable Construction Details creating a pocket to trap rainwater.

(ACDs) in Ireland in 2008. They cover some 160 separate details If all of those conditions are achieved, then the Quinn ACD 2.22 can applicable to about 95% of all residential construction and a significant deliver a certified Psi-value of 0.012 W/mK and fRsi of 0.95 for a wall proportion of low-rise non-residential construction. with a U-value of 0.15 W/m2K. In comparison, the official Irish ACD 2.22 (UK MEI-WD-02) will Many building professionals rely on the ACDs as prima facie deliver a much more conservative Psi-value evidence of compliance with building regulations. However, they are not without their critics, of 0.109 W/mK and a fRsi presumed to be at or especially as they have failed to keep pace with above 0.75. In other words, the heat transfer developments in overall building performance through the Irish government’s detail is nine since their introduction. It is chastening to think times greater than that through the equivalent that they were considered best practice when Quinn sill detail. Such a nine-fold improvement first introduced. 10 years later, they are now in junction thermal performance is not unusual. found only in the worst performing buildings Were it to be followed in all details, the allowance that it is legal to build. for total building heat loss could be reduced Thankfully, there are several alternatives now by over 40% from default values. This is not an available that are significantly better than the insignificant figure. official ACDs, but it is important to know when In a recent survey of 68 experienced Irish a substitute can be relied on to deliver a certified building professionals, I found many willing to performance in terms of heat loss (Psi-value) claim the nine-times-better Psi-value for the or mould risk (fRsi). Both of these critical Quinn sill detail, but none able to convincingly performance values are derived from thermal explain how they were going to get the insulation modelling. to cover the window frame by 15mm internally In Ireland, the profession of thermal modelling and externally. Many did not even recognise that is regulated by the National Standards Authority this was required at all. of Ireland (NSAI). NSAI-approved thermal That is not how the manufacturer’s accredited modellers are experts whose calculated perforconstruction details scheme works: designers mance can be relied upon to prove compliance must deliver precisely what is specified in the with building regulations for heat transfer and manufacturer’s accredited detail to claim the mould risk. The UK has a voluntary scheme and accredited performance values. operates its own national convention. Because Designers do not yet appear to grasp the of this divergence, a detail assessed in the UK very limited (almost zero) latitude they have to may not comply with Irish building regulations work within, if they intend to claim the certified whereas all NSAI-approved thermal modeller’s performance figures calculated for a manufacturer’s accredited detail. Manufacturers offering junctions are compliant in the UK. An illustration from Quinn’s detail 2.22 such details will also need to communicate any Leading building product manufacturers conditions attached in language that specifiers have produced their own construction details, many certified by NSAI-approved thermal modellers, which form can easily understand, possibly using an online-recorded video.

Contractors must also recognise that the superior performance on an excellent resource for designers wishing to minimise the cost of construction whilst maximising the performance of completed offer will be unique to the particular manufacturer’s products and buildings. In this article, I propose to review one such detail to illustrate cannot be claimed if there is any substitution of materials during the the care required when substituting manufacturer’s details for officially procurement or construction phases of a building project.

We all need to learn from this example: manufacturers to explain the sanctioned ACDs. In this field, the Quinn Building Products “Accredited Construc- latitude possible with their details, specifiers and certifiers to follow the tion Details” are exemplary. The Quinn sill detail for an externally manufacturer’s guidance carefully, and contractors to build precisely to insulated wall, detail 2.22, for example, assumes the designer will the specification and details. find a way to ensure that an airtight membrane connects the window Otherwise, we may as well all step back 10 years in time and build to frame to the internal wet plaster, and that the subsequent fixing of the the official ACDs. n window board does not damage this membrane. It also requires that a minimum 37.5mm thickness of insulated plasterboard (25mm insulaHAVE A QUESTION YOU WANT TO PUT TO THE HELP DESK? tion and 12.5mm plasterboard) is provided to the inside of the window Email: helpdesk@passivehouseplus.ie frame beneath the window board and that the insulation layer overlaps the window’s bottom frame by at least 15mm. It also requires that Please note that personal correspondence cannot be entered into. the window frame and sill combination must be of a type that allows

98 | passivehouseplus.ie | Issue 25

CavityTherm

®

For more information contact our Technical Team

It’s not just about U-Values

T 046 906 6050 www.xtratherm.ie

CavityTherm wall insulation delivers not only passive U-Values but also the detailing to combat thermal bridging heat loss.

Accessories:

A continuous wall insulation system delivering ultimate thermal performance with the added assurance of inbuilt protection from wind driven rain.

Accessories:

Integral Rain Barrier

Preformed Corner Panels

Service Void Panels

Jointing Strip

Hockey Stick Insulation

Cavity Tray Channel

ph+ | editor’s letter | 99

A big step setting the new heat pump standard

The new generation Daikin Altherma 3 High performance - The 3rd Generation of Daikin Altherma is taking you beyond the imaginable with its performance: A+++ Seasonal efficiency and operation range down to -25°C. Easy to install - The floor standing unit only has a 60 cm² footprint and you can choose for white or silver-grey colour.

Easy to control - Fully digital, the Daikin Altherma 3 can be controlled from everywhere with an app or a home control system.

Are you ready for the next generation?

Come and see the new Altherma 3, visit stand E4 at the Energy Show, RDS Dublin on April 19.

100 | passivehouseplus.ie | Issue 21 324 546 or see www.daikin.ie For more details, call 1800