Wind Turbine Access & Rescue Solutions

Page 1

Wind Turbine Access & Rescue Solutions

©2020 Petzl Distribution - Remi Flament - Enercon

Accessing the inaccessible is a routine requirement for many of the professionals who use our products. This booklet has been created to share our knowledge on techniques related to the use of our products, and to allow you to work safely and more efficiently in your daily activities as wind turbine technicians. Do you work on land-based or offshore wind turbines? This booklet is for you, including useful information such as turbine access, setting up a workstation, and rescue techniques.

Warnings:

- You must have understood and retained the information from your products’ Technical Notice.

- Learning appropriate techniques and methods of protection is your own responsibility. The Petzl solutions provided here are given only as examples, and others may exist. The relevance of the technical solutions depends on the situation: you must always carry out your own risk analysis in the field.

- Mastering the techniques presented here requires specific training and practice. Work with a specialized organization for all of your training activities.

GENERAL PRINCIPLES FOR WORK AT HEIGHT PRODUCTS CONTACTS - The three main work situations 2 - General information on falls 3 - Clearance 4 - Petzl products 14 - Vertical lifeline system 24 - Mobile elevated work platform (MEWP) kits 26 - Petzl Technical Sales Reps 28 - Presence of a cable or rail ladder fall protection system 5 - Presence of an unprotected ladderway or access route that can be taken using energyabsorbing Y-lanyards 6 - Accessing and setting up the workstation 8 - Rescue of a conscious person hanging on an ABSORBICA lanyard after a fall using the JAG RESCUE KIT 10 - Self-evacuation using an EXO AP Personal Escape System 13 WIND TURBINE ACCESS TECHNIQUES RESCUE TECHNIQUES Cover ©2019 Petzl Distribution - Vuedici.org -RES -Parc éolien de Marsanne
CONTENTS

GENERAL PRINCIPLES FOR WORK AT HEIGHT

The three main work situations and the regulatory framework of the associated equipment

The regulatory framework for personal protective equipment associated with various work situations depends on the current legislation in your country. Here we provide only some examples of product standards related to these uses.

• Restraint

A restraint system limits the work zone, keeping the worker from entering an area that may present a fall risk. This system is not designed to arrest a fall from height.

• Positioning

A work positioning system supports the user and allows them to be precisely positioned with the weight on their feet. This system is not designed to arrest a fall; the user must keep their body weight on the positioning system.

The work positioning system must be used together with a fall arrest system.

• Fall arrest

The fall arrest system is a belay system that is independent of the means of progression or work positioning.

The fall arrest system prevents the user from falling to the ground in the event of a fall. Its role is to arrest the fall while limiting the impact force experienced by the user. It must therefore be used with enough clearance to allow for a free fall.

2

General information on falls

The risk of falling is a key concept to master when working at height. The severity of a fall depends on independent factors:

The weight of the user, including equipment:

The greater the weight, the more energy there is to be dissipated during the fall.

The length of the fall:

The longer the fall, the more energy to be dissipated during the fall. The risk of hitting an obstacle is also greater.

The position relative to the anchor: When the worker moves above their anchor, the severity of the potential fall increases. The fall factor concept is sometimes used to describe the worker’s position relative to the anchor and the severity of the fall.

1 m 1 m 1 m WIND TURBINE ACCESS & RESCUE SOLUTIONS 3

GENERAL PRINCIPLES FOR WORK AT HEIGHT

Clearance

Clearance is the amount of clear space required below the user’s feet to avoid hitting an obstacle in a fall.

The amount of clearance is given in the Technical Notice for each fall arrest device, such as the lanyard with energy absorber and mobile fall arrester.

Note that for a given product, the clearance depends on the user’s weight and on their position relative to the anchor.

The risk of a pendulum is just as important to consider as the risk of hitting the ground or an obstacle. It is essential to consider clearance from a multi-directional perspective. During a fall, the worker can pendulum: there is a risk of hitting the structure, and the lanyard can rub along a bar or platform edge.

1 m ! 4

WIND TURBINE ACCESS TECHNIQUES

Depending on the turbine, ease of access can vary and require different techniques. For example, there may be a lifeline along a ladder, or access may be possible using energy-absorbing Y-lanyards.

Presence of a cable or rail ladder fall protection system

Ladder fall protection rail or cable grabs are connected to the harness sternal connection points for ease of use.

When a ladder fall protection system is not available, such as during the construction phase, a temporary ASAP vertical lifeline can be installed for fall protection.

WIND TURBINE ACCESS & RESCUE SOLUTIONS 5
VOLT WIND ©2020 Petzl Distribution - Vuedici.org - Boralex SAS

WIND TURBINE ACCESS TECHNIQUES

Presence of an unprotected ladderway or access route that can be taken using energy-absorbing Y-lanyards

Ladders can be climbed using an energy-absorbing Y-lanyard if other fall protection systems are not available or if someone is stranded in the ladderway.

Warning: Make sure the ladder rungs or rails used as connection points during a climb are capable of sustaining at least two times the maximum arresting force.

Avoid connections that could result in cantilever loading of the lanyard-end connectors.

Lanyards with elasticized arms are especially suited to this technique. Be sure to select lanyard-end connectors suitable for the structure, such as MGO-type large-opening connectors that allow easy clipping of large-diameter bars.

Be sure to always keep a lanyard arm clipped to the structure, favoring connection points above the waist to reduce the fall height, in order to limit the chances of striking the structure in the event of a fall.

6

When walking on a wind turbine nacelle equipped with two anchor rails, make certain that each arm of the ABSORBICA-Y lanyard is connected to each separate rail.

When climbing with a dorsally connected ABSORBICA-Y lanyard, make certain that the lanyard arms are kept over the user’s arms and shoulders. This is to limit possible injuries and to ensure proper deployment of the shock absorber.

HOW-TO VIDEO

Correct Use Incorrect Use

WIND TURBINE ACCESS & RESCUE SOLUTIONS 7
Use ABSORBICA-Y TIE-BACK lanyard

WIND TURBINE ACCESS TECHNIQUES

Accessing and setting up the workstation

A GRILLON work positioning lanyard can be used in single or double mode for a hands-free and more comfortable setup. Work positioning lanyards are used in combination with a fall protection lanyard or vertical lifeline system.

Tensioning the rope or shortening the lanyard

Lengthening the lanyard in double mode

HOW-TO VIDEO

Use GRILLON in single mode

Lengthening the lanyard in single mode or releasing under load

HOW-TO VIDEO

Use GRILLON in double mode

8
©2020 Petzl Distribution - Remi Flament - Enercon

RESCUE TECHNIQUES

As with any site, it is necessary to have previously organized an evacuation plan and to have been trained in rescue techniques. While there are multiple configurations and it is impossible to describe them all, here we provide some examples of relatively simple rescue scenarios.

Rescue of a conscious person hanging on an ABSORBICA lanyard after a fall using the JAG RESCUE KIT

For the rescue, a coworker must set up a load transfer and evacuation system, for example based on the JAG RESCUE KIT. Once this system is attached to a suitable anchor, the difficulty is in accessing the victim.

The ideal situation is to be able to attach the evacuation system directly to the victim’s harness. The manual operations are easier, and setup is cleaner with less equipment. Direct connection to the harness also allows the victim to be raised more efficiently if an obstacle must be passed during evacuation.

10

The JAG RESCUE KIT is anchored above and used to transfer the casualty’s weight from their lanyard or cable/rail grab to the lowering system. It can also be used on rappel when an accompanied rescue is required. See Petzl.com for more information.

1. 1.
TURBINE ACCESS & RESCUE SOLUTIONS 11
2.
WIND

RESCUE TECHNIQUES

If accessing the victim’s harness is difficult, there are several attachment points that may be reachable from the structure that the JAG RESCUE KIT can be connected to:

• The eye of the MGO on the victim’s lanyard

• An intermediate tie-back loop on the ABSORBICA-Y TIE-BACK lanyard

• A rope clamp suitable for a rope lanyard or for a webbing lanyard, such as a BASIC or RESCUCENDER

12
BASIC UP BASIC RESCUCENDER UP

Self-evacuation using an EXO AP Personal Escape System

The EXO AP Personal Escape System can be used to perform a self-evacuation when working from a MEWP or from the turbine nacelle. The EXO AP is available with different anchor connectors and custom rope lengths to suit your needs.

MEWP

Connect to approved anchor point and ensure proper alignment before loading to limit lateral rope movement on rail.

Turbine Nacelle

Connect to approved anchor point directly above the nacelle’s hatchway or to approved anchor points on top of the nacelle, if evacuating from that area.

WIND TURBINE ACCESS & RESCUE SOLUTIONS 13
©2022 Petzl Distribution - Roh
All at-height self-evacuation training must be performed using a secondary vertical lifeline system with a mobile fall arrester or a back-up partner belay line.

HELMETS AND ACCESSORIES

VERTEX

Comfortable helmet with six-point textile suspension

The VERTEX provides protection against falling objects, electrical hazards, molten metal splash, flames, and lateral deformation. Its webbing suspension provides optimal comfort.

VERTEX VENT

Comfortable ventilated helmet with six-point textile suspension

The VERTEX VENT provides protection against falling objects, molten metal splash, and lateral deformation. Its webbing suspension provides optimal comfort and has ventilation holes with sliding shutters to allow airflow through the helmet.

STRATO

Lightweight helmet with molded foam liner

The STRATO provides protection against falling objects, electrical hazards, molten metal splash, flames, and lateral deformation. It is lightweight thanks to a molded foam liner.

STRATO VENT

Lightweight ventilated helmet with molded foam liner

The STRATO VENT provides protection against falling objects and lateral deformation. It is lightweight thanks to a molded foam liner and has ventilation holes to allow airflow through the helmet.

adjustable headband allows the helmet to be perfectly centered on the head

provides a secure fit on the head and also folds into the shell for easy storage

adjust chinstrap strength to adapt to work at height or on the ground

easily mount protective eye and face shields, headlamps, and more

14
CENTERFIT Adjustment DUAL Chinstrap FLIP&FIT System
HI-VIZ HI-VIZ HI-VIZ HI-VIZ
Modular Accessories

VIZIR Eye shield

Transparent eye shield with scratch-resistant and anti-fog coatings that protects eyes from projectile hazards. It is easy to install on Petzl helmets with the EASYCLIP attachment system.

VIZIR SHADOW Tinted eye shield

Tinted eye shield with scratch-resistant and anti-fog coatings that protects eyes from sun (level 2.5 solar protection) and projectile hazards. It is easy to install on Petzl helmets with the EASYCLIP attachment system.

VIZEN Face shield

Full-coverage shield offers face and eye protection against electric arc hazards while preserving peripheral vision. It is easy to install on Petzl helmets with the EASYCLIP attachment system and also has scratch-resistant and anti-fog coatings.

NAPE PROTECTOR High-visibility nape protector

The nape protector for Petzl helmets provides effective sun and rain protection for the nape of the neck. Fluorescent colors give the worker optimal visibility, night and day. Available in yellow and orange.

NAMETAG HOLDER

The nametag holder allows for quick identification of the worker. It is easy to install and provides effective rain protection.

WIND TURBINE ACCESS & RESCUE SOLUTIONS 15

HARNESSES AND ACCESSORIES

VOLT WIND Fall arrest and work positioning harness for wind turbine use

The VOLT WIND harness features a wide, semi-rigid waistbelt and leg loops which provide excellent support. It is very quick to put on and can be donned with both feet on the ground, thanks to the FAST LT PLUS buckles. Specifically designed for wind turbine use, it has wear protectors on the rear waistbelt and dorsal point. These features help to prevent strap wear and to provide optimal comfort when moving about inside the wind turbine tower.

AVAO BOD FAST Fall arrest, work positioning, and suspension harness

The AVAO BOD FAST is designed for greater comfort in all situations. The DOUBLEBACK self-locking buckles at the rear of the harness, between the waistbelt and the leg loops, allow for a shorter adjustment when the dorsal attachment point is used. The harness has an integrated fall indicator on the dorsal attachment point and is fastened with a TRIACT-LOCK automatic locking carabiner.

ASTRO BOD FAST Ultra-comfortable rope access harness

With an integrated CROLL L ventral rope clamp, the ASTRO BOD FAST harness is designed for greater efficiency and comfort during rope ascents. The gated ventral attachment point allows optimal integration of equipment, such as rope clamp or seat. A PODIUM seat can be attached to the axle of the attachment point so the load is supported directly by the descender, while providing mobility at the ventral attachment point.

NEWTON EASYFIT

Comfortable and quick-donning fall arrest harness

The NEWTON EASYFIT is a comfortable, ergonomic fall arrest harness that can be quickly donned. It is equipped with padded shoulder straps and FAST LT PLUS buckles on the leg loops, allowing the harness to be donned with both feet on the ground, without loss of adjustment. Its lightweight, breathable design offers two zippered pockets for storing small items. The harness ergonomically stows MGO connectors and has fall indicators.

16

NEWTON Fall arrest harness

The NEWTON is a lightweight, ergonomic fall arrest harness. The harness is easy to use; its straps are color-coded to simplify donning. The NEWTON offers ergonomic stowage of MGO connectors and has fall indicators.

PODIUM

Seat for AVAO and ASTRO harnesses for greater comfort during suspension

The PODIUM provides optimal comfort during prolonged suspension. The wide sitting position offers excellent stability. Rigid sides prevent the webbing straps from cutting into the thighs. The easy-to-use seat has two equipment loops and a rear hook, making it easier to store in order to facilitate movement.

LANYARDS | FALL PROTECTION

ABSORBICA-Y MGO

Double lanyard with energy absorber and MGO connectors

The ABSORBICA-Y MGO is a double lanyard with an integrated compact energy absorber, designed for progression on a vertical structure or a horizontal lifeline, and for passing intermediate anchors. It is available in 80 cm and 150 cm lengths. The 150 cm length has elasticized arms to avoid hindering progression.

ABSORBICA-Y TIE-BACK MGO

Double lanyard with energy absorber, intermediate tie-back rings, and MGO connectors

Including the features of the ABSORBICA-Y MGO, the ABSORBICA-Y TIE-BACK MGO includes the TIE-BACK system which allows the lanyard ends to be reconnected to fit around structures with a very large cross section. In a rescue situation, these rings are easily accessible for the rescuer, even when the person is suspended on the lanyard after a fall.

WIND TURBINE ACCESS & RESCUE SOLUTIONS 17

ABSORBICA-I VARIO

Adjustable single lanyard with integrated energy absorber

The ABSORBICA-I VARIO is an adjustable single lanyard with an integrated compact energy absorber and features the VARIO adjustment system, allowing the lanyard length to be adjusted in order to reduce potential fall height.

ABSORBICA-I 150 CM

Single lanyard with integrated energy absorber

The ABSORBICA-I 150 cm is a single lanyard with an integrated compact energy absorber and an elasticized arm to avoid hindering progression.

LANYARDS | WORK POSITIONING

GRILLON Adjustable lanyard for work positioning

The GRILLON adjustable lanyard is used to make work positioning systems that complement a fall arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Depending on the configuration, it can be used in single or double mode. It is available in seven lengths: 2, 3, 4, 5, 10, 15 and 20 m.

GRILLON PLUS Adjustable lanyard for work positioning with excellent abrasion resistance

The GRILLON PLUS lanyard includes the features of the GRILLON with an aramid fiber rope that provides excellent abrasion resistance. Depending on the configuration, it can be used in single or double mode. It is available in two lengths: 2 and 3 m.

18
LANYARDS | FALL PROTECTION

GRILLON HOOK Adjustable work positioning lanyard with HOOK connector

The GRILLON HOOK adjustable lanyard is used to make work positioning systems that complement a fall arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Its HOOK connector is ideal for using the lanyard in double mode on the harness side attachment points. It is available in four lengths: 2, 3, 4 and 5 m.

GRILLON MGO

Adjustable work positioning lanyard with MGO connector

The GRILLON MGO lanyard is used to make work positioning systems that complement a fall arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station.

The MGO connector features a very large gate opening, making it ideal for connection to metal structures or to large-diameter cables and bars. The GRILLON MGO is available in two lengths: 2 and 3 m.

LANYARDS | ACCESSORIES

EASHOOK OPEN

Connector with gated connection point for double lanyard and work positioning lanyard

The EASHOOK OPEN connector is designed for use at the ends of a double lanyard or work positioning lanyard. The gated connection point allows for direct attachment of the connector to the lanyards. If the lanyard is damaged, the connector can be reused. The excellent grip and automatic locking system facilitate handling when passing intermediate anchors.

MGO OPEN

Auto-locking directional connector with large gate opening and gated connection point

The MGO OPEN is an auto-locking directional connector with a large gate opening for connection to metal structures or to large-diameter cables and bars. It has a gated connection point for attachment to different types of lanyards. If the lanyard is damaged, the connector can be reused. It is available in two versions: 60 mm opening and 110 mm opening.

WIND TURBINE ACCESS & RESCUE SOLUTIONS 19

DESCENDERS

I’D S

Self-braking descender with anti-panic function for work at height and rope access work

The I’D S is primarily designed for work at height and rope access work. It has an ergonomic handle that allows comfortable descent control. The integrated anti-panic function and anti-error catch limit the risk of an accident due to user error. The AUTO-LOCK system allows users to easily position themselves at a workstation without having to manipulate the handle or tie off the device. Once locked, the rope can be taken up without having to manipulate the handle. The safety gate allows the rope to be installed with the device remaining connected to the harness. The I’D S is compatible with 10 to 11.5 mm ropes and allows handling of loads up to 250 kg.

I’D L

Self-braking descender with anti-panic function for rescue

The I’D L self-braking descender is primarily designed for rescue. It has an ergonomic handle that allows comfortable descent control. The integrated anti-panic function and anti-error catch limit the risk of an accident due to user error. The AUTO-LOCK system allows users to position themselves without having to manipulate the handle or tie off the device. Once locked, the rope can be taken up without having to manipulate the handle. The safety gate allows the rope to be installed with the device remaining connected to the harness. The I’D L is compatible with 12.5 to 13 mm ropes and allows handling of loads up to 280 kg.

MAESTRO

Descender with integrated progress-capture pulley

The MAESTRO is a descender designed for technical rescue operations. It facilitates manipulation of heavy loads, for lowering or hauling, and may be used in both the primary system or in a back-up belay. This versatility allows rescuers to adapt to any situation they may encounter on the rescue scene. The integrated progress-capture pulley has a large diameter sheave mounted on sealed ball bearings, ensuring excellent hauling efficiency. The AUTO-LOCK system automatically locks the rope when the handle is not in use. Once locked, the rope can be taken up without having to manipulate the handle. The MAESTRO S is compatible with 10.5 to 11 mm ropes and allows handling of loads up to 250 kg. The MAESTRO L is compatible with 12.5 to 13 mm ropes and allows handling of loads up to 280 kg.

20
S L

ROPE CLAMPS & PULLEYS

ASCENSION

Handled rope clamp for rope ascents

The ASCENSION handled rope clamp is designed for rope ascents and features an overmolded grip and ergonomic upper part for a comfortable and powerful grip when pulling with one or two hands. Its toothed cam with self-cleaning slot optimizes performance under any conditions. It is available in left or right-handed versions and is compatible with 8 to 13 mm ropes.

BASIC

Compact, versatile rope clamp

The BASIC is a very compact rope clamp, ergonomically designed to make it easy to grip. It can be paired with the ASCENSION or a chest ascender (such as the CROLL) to create an efficient rope ascent system. The BASIC can also be used in rescue situations, see pg. 12 for more information.

RESCUCENDER

Openable cam-loaded rope clamp

Simple to use and ergonomic, the RESCUCENDER is an openable cam-loaded rope clamp designed for use in haul systems as a tractor or progress capture device. It is compatible with 9 to 13 mm ropes.

ROLLCLIP A TL

Pulley-carabiner

The ROLLCLIP A is a pulley-carabiner with a gate opening on the pulley side that facilitates installation of the rope when the pulley is fixed to the anchor. It also features an automatic TRIACT-LOCK locking system. It is compatible with 7 to 11 mm ropes.

ROLLCLIP Z TL

Pulley-carabiner

The ROLLCLIP Z is a pulley-carabiner with a gate opening on the non-pulley side to facilitate installation on anchors and devices. It also features an automatic TRIACT-LOCK locking system. It is compatible with 7 to 11 mm ropes.

WIND TURBINE ACCESS & RESCUE SOLUTIONS 21

ANCHORS

CONNEXION FIXE Anchor strap

The CONNEXION FIXE is a durable anchor strap with two forged steel attachment points. It offers several configurations for setting up an anchorage directly on an anchor or around a suitable structure. It is available in three lengths: 100, 150 and 200 cm.

CONNEXION VARIO Adjustable anchor strap

The CONNEXION VARIO is a durable and adjustable anchor strap equipped with two forged steel attachment points. It offers several configurations for setting up an anchorage directly on an anchor or around a suitable structure. The strap length is adjustable, thanks to an adjustment buckle. A system keeps the remaining webbing stowed. It is available in two lengths: 30-200 cm and 200-400 cm.

WIRE STROP Anchor strap made of galvanized steel

The WIRE STROP is an anchor strap made of 6.5 mm diameter galvanized steel with two terminations of different sizes. It offers several configurations for setting up an anchor: directly to an anchor point or around a suitable structure. The plastic sleeve keeps the connector in position and facilitates clipping. It is available in five lengths: 50, 100, 150, 200 and 300 cm.

22

RESCUE

JAG RESCUE KIT Ready-to-use rescue kit

The JAG RESCUE KIT is a ready-to-use rescue kit designed to easily pick off and lower a victim. Its 4:1 mechanical advantage and excellent pulley efficiency allow the user’s effort to be multiplied by 4 when raising a victim. The I’D EVAC descender’s handle is specially designed to easily lower a victim and has an anti-panic function that activates if the user pulls too hard on the handle. This brakes and stops the descent automatically.

It contains a JAG SYSTEM haul kit, a RING OPEN gated ring, an I’D EVAC descender with integrated brake, a CONNEXION FIXE 150 cm anchor strap, a BUCKET bag, and an AXIS 11 mm rope with two sewn terminations. It is available in three lengths: 30, 60, and 120 m.

EXO AP Personal escape system

The EXO AP is a personal escape system used for self-evacuation during a MEWP mechanical failure or a fire emergency in a wind turbine. It has a self-braking system with an anti-panic function for controlling and stopping a descent. If the user pulls too hard on the handle, the anti-panic function brakes and stops the descent automatically. The EXO AP is available in custom rope lengths.

WIND TURBINE ACCESS & RESCUE SOLUTIONS 23
JAG SYSTEM RING OPEN I’D EVAC CONNEXION FIXE AXIS 11 mm

VERTICAL LIFELINE SYSTEM

Petzl's pre-assembled vertical lifeline kits are certified to meet the ANSI Z359.15 standard* and designed to keep those that work-at-height safe. In case of a slip or fall, the ASAP or ASAP LOCK mobile fall arrester locks onto the RAY rope arresting the user and stopping the fall. In normal use, the device moves freely along the rope without any manual intervention and follows the user’s movement. The ASAP’SORBER provides energy absorption, and limits impact forces accordingly to the user’s weight and fall distance.

*RAY is sold separately and is required to work in compliance with ANSI Z359.15

24
RAY 11 mm* lifeline ASAP or ASAP LOCK mobile fall arrester BM’D + CAPTIV connectors ASAP’SORBER energy absorber ASAP Bm'D x2 CAPTIV x2 ASAP'SORBER 20 ASAP 20 KIT ASAP Bm'D x2 CAPTIV x2 ASAP'SORBER 40 ASAP 40 KIT ASAP LOCK Bm'D CAPTIV ASAP'SORBER 20 ASAP LOCK 20 KIT ASAP LOCK Bm'D CAPTIV ASAP'SORBER 40 ASAP LOCK 40 KIT ASAP LOCK Bm'D CAPTIV ASAP'SORBER AXESS ASAP LOCK AXESS KIT

RAY 11 MM Static rope with sewn termination

The RAY 11 mm static rope with sewn termination is designed for use with an ASAP or ASAP LOCK mobile fall arrester. It has low stretch when put under tension, allowing it to meet the requirements of the ANSI Z359.15 fall protection standard. The standard diameter ensures a good grip for easier handling. It is available in five lengths: 25, 50, 75, 100 and 200 ft.

ASAP Mobile fall arrester

With its unique locking system, the ASAP sets the standard in fall protection for workers at height. In normal use, the device moves freely along the rope without any manual intervention and follows the user’s movements. In the event of a shock load or sudden acceleration, the ASAP locks on the rope and stops the user.

ASAP LOCK Mobile fall arrester with locking function

The ASAP LOCK includes the features of the ASAP with an integrated locking function that allows the user to immobilize the device in order to reduce the potential fall distance. The locking function is also ideal for work in windy conditions, helping to keep the rope taut above the worker.

ASAP’SORBER Energy absorber for ASAP or ASAP LOCK

The ASAP’SORBER allows the user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, 20 cm and 40 cm, to provide the best balance between distance from the rope and reduced fall length.

BM’D AND CAPTIV

High-strength carabiner with positioning bar

WIND TURBINE ACCESS & RESCUE SOLUTIONS 25

MOBILE ELEVATED WORK PLATFORM (MEWP) KITS

Petzl’s mobile elevated work platform (MEWP) kits offer a simple, ready-to-use fall protection solution for work on a wind turbine from a bucket truck or lift. The NEWTON and NEWTON EASYFIT are fall arrest harnesses with sternal and dorsal attachment points, providing great versatility. The ABSORBICA-I 150 cm and adjustable ABSORBICA-I VARIO single lanyards absorb energy in the event of a fall. There are five kits available, where you can pick harness size, choice of harness, and choice of lanyard. Each kit includes a BUCKET bag to easily store and transport the gear.

B

connectors

Applications

ABSORBICA-I VA RIO fall protection lanyard

Bucket Truck

*See pg. 16 for harness descriptions

HOW-TO VIDEO

Use ABSORBICA-I in a MEWP

Scissor Lift

Boom Lift

26
NEWTON* fall protection harness M’D + CA PTIV (2)

ABSORBICA-I VARIO

Adjustable single lanyard with integrated energy absorber

The ABSORBICA-I VARIO is an adjustable single lanyard with compact energy absorber and features the VARIO adjustment system, allowing the lanyard length to be adjusted in order to reduce potential fall height.

BM’D AND CAPTIV

High-strength carabiner with positioning bar

BUCKET 15

15 L freestanding bag

Conveniently store and transport a harness and lanyard with the BUCKET 15. It remains upright and keeps its shape, even when empty, for easy access to the inside of the bag.

WIND TURBINE ACCESS & RESCUE SOLUTIONS 27
©2022 Petzl Distribution - Roh

PETZL TECHNICAL SALES REPS Contacts

28
Matt Lewis ID, OR, MT, SW. WA mlewis@altagroupinc.com 503-502-3234
Scott Polk N. CA spolk@altagroupinc.com 206-617-3485
760-944-9319
Greg Kaiser (MIL/TAC/LE) CA, HI greg@globalcontacts.biz
206-783-0760
Dave Haavik WA dhaavik@altagroupinc.com
360-466-4231
Dave
Allan AK, NW. WA, W. CAN dallan@altagroupinc.com
206-612-4160 Northwest,
Coast,
Western US (AK, CA, HI, ID, MT, OR, WA) Western Canada (AB, BC, NT, SK, YT) Alta Group | P: 360-466-4231 9534 13th Ave. NW Seattle, WA 98117
Greg Houston S. CA, HI ghouston@altagroupinc.com
West
Western Canada
715-225-6924
Dave Rone dave@atheight.net
651-253-7611
james@atheight.net 651-263-4014 Midwest IA, IL, IN, KS, MI, MN, MO, ND, NE, SD, WI At Height | P: 651-253-7611 667 Wheelock Pkwy West St. Paul, MN 55117
bbrechwald@elevationpro.net 435-640-5224
205-613-3586
NV, AZ greg@globalcontacts.biz 760-944-9319 Rockies, Southwest AZ, CO, NM, NV, UT, WY Elevation | P: 435-640-5224 4821 E Meadows Dr Park City, UT 84098
Abbey Gilchrist Pro6@petzl.com 801-926-1510 Petzl CSS Rep
Pro4@petzl.com 801-926-1542
Aland Pro5@petzl.com 801-926-1530
Scott Backes scott@atheight.net
James Flinsch
Brian Brechwald
Bill Moor bmoor@elevationpro.net
Greg Kaiser (MIL/TAC/LE)
Petzl CSS Rep
Petzl CSS Rep Elliot Floyd
Jaden

Mariane Rockefeller Pro2@petzl.com 801-926-1526

Professional Division Sales Reps

Eastern Canada

MB, ON, QC, NB, NS, PEI, NL Neve Enterprises | P: 905-866-8449 Ontario, Canada

E. ON mpilotte4petzl@icloud.com 514-266-7156

Michel

E. QC, N. NB mtremblay4petzl@gmail.com 418-693-2363

Wyatt Edwards Pro3@petzl.com 801-926-1549

Mariane Rockefeller Pro1@petzl.com 801-926-1526

Jasmin Neve NL, NS, PEI, S. NB jneve4petzl@gmail.com 905-965-3127

Petzl America 2929 Decker Lake Dr. Salt Lake City, UT 84119 professionalsales@petzl.com 801-926-1500

After Sales & Service Warranty and Returns returns@petzl.com 877-807-3805

Nick Beurskens nickb@petzl.com 801-926-1517

WIND TURBINE ACCESS & RESCUE SOLUTIONS 29
Rep TBD professionalsales@petzl.com 801-926-1500
CT, MA, ME, NH, NJ, NY, RI, VT Petzl America 2929 Decker Lake Dr., Salt Lake City, UT 84119
Northeast
Northeast
AR, MS, W. TN, OK jrmccullar@gmail.com 662-801-4247
Russell McCullar
DC, DE, MD, PA, N. VA bhughes02@gmail.com 443-883-6468
Brian Hughes
NC, OH, VA, WV btdorough@gmail.com 540-239-4491
Brad Dorough
KY, TN, N. TX
423-802-9374
John Dorough
jwdorough@comcast.net
AL, FL, GA, SC jccaughman@comcast.net 423-991-6263
Crandall Caughman
TX
512-293-7293
KY, OH andrew.verticalmomentum@gmail.com 503-338-8189 Southeast, South Central, Mid-Atlantic AL, AR, DE, FL, GA, KY, LA, MD, MS, NC, OH, OK, PA, SC, TN, TX, VA, WV Vertical Momentum | P: 423-802-9374 25 Chesten Mountain Road Asheville, NC 28803
Troy Wilson LA,
troywilsontech@gmail.com
Andrew Spencer
Maurice Pilotte W. QC, Ian Neve MB, W. ON ineve4petzl@gmail.com 905-866-8449 Tremblay Petzl CSS Rep Petzl CSS Rep Petzl CSS Rep Petzl CSS Manager

FOR MORE INFORMATION...

The information contained in this brochure is non-exhaustive. See the Technical Notice for the products, and their related technical advice. Training is essential.

You are responsible for your own actions, decisions and safety.

© Petzl / 06/2022

more technical advice and videos at www.petzl.com
Find
© 2020 Petzl DistributionRemi FlamentEnercon

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.