Bene rf corridor wall technics

01

RF CORRIDOR WALL. TECHNICS.

RSRFR30R001

02

RF CORRIDOR WALL. CONTENTS.

04

GENERAL.

06

SINGLE GLAZED.

08

DOUBLE GLAZED.

10

SLIDING DOOR WITH FAN LIGHT.

12

SLIDING DOOR AT ROOM HEIGHT.

14

HINGED DOOR WITH FAN LIGHT.

16

FOLDING DOOR AT ROOM HEIGHT.

18

WALL CONNECTION.

19

VERTICAL CONNECTIONS.

20

RF T-CONNECTION.

21

RG T-CONNECTION.

22

R2 T-CONNECTION.

23

GK T-CONNECTION.

24

R2 LINEAR CONNECTION.

25

CERTIFICATES.

26

OVERVIEW.

27

JOINT AT VARIOUS WALL DIVISIONS.

28

FACTS.

29

GENERAL PARAMETERS.

30

MATERIAL.

03

All detail on scale of 1:2.5

04

RF CORRIDOR WALL. GENERAL.

RF CORRIDOR WALL. RF corridor wall is available either single or double glazed. Whether viewed from the corridor or from the office, Bene RF boasts a continuous glass surface and meets all aesthetic requirements for unmatched transparency. The transparent glass elements are bonded so as to produce a uniform, flush and aesthetically clean design. Bene’s frameless non load-bearing RF system can be installed within areas with heights up to 350 cm without any requirement for additional vertical support.

Glass elements are bonded vertically with transparent or anthracite adhesive.

A transparent silicon joint sealant is optional. Horizontal bonding of glass panels and profiles with adhesive. An aluminum pilaster strip protects the glass edges and assumes most of the load-bearing function. All elements, including the glass, the hinged doors and the wall connections, are manufactured in a perfect finish down to the last detail, following a consistent, uniform design scheme.

Elements are arranged in coordinated, project-specific module measurements, permitting reversible arrangement of door and glass panels. For office remodelling, safety locks are simply released and panels unhooked. When rooms need to be used for different purposes, panels can easily be upgraded from single to double glazing without changing the design.

Glass Corridor Partition Wall in Perfection.

Puristic design and multiple technical options. The design of the plane surface, with flat integrated door elements, reflects a clear attitude: Transparency with top quality and consistency.

The characteristic contouring on the floor and ceiling is a design criterion and meets all technical requirements.

Reduced style, high-tech look, convincing sound absorption and air conditioning: This is what Bene RF is synonymous with.

Room heights up to 350 cm, frameless, without distracting vertical profiles.

Maximum transparency and design consistency, meeting all specifications for increased sound insulation up to 49 dB.

The visual impact of having maximum amounts of glass with minumum profiles sets new standards in the world of high-end office design.

Its innovative construction is based upon a unique design principle.

Bene‘s RF is compatible with various other Bene partitioning systems allowing integration of vertical functional elements such as working walls.

RF is installed like all other Bene room systems; in a single phase, unlike many other partitioning systems.

RF CORRIDOR WALL. GENERAL.

05

RSRFR30R001

Construction.

The linear glass wall allows floor-to-ceiling heights of up to 350 cm and module widths up to 150 cm. Glass panels are bonded to system rails with adhesive and fixed to floor and ceiling rails using levelling elements. Identical front glass design for single or double glazed option. Folding doors are flush mounted. Sliding-door panels are frameless and have excellent sliding properties.

Bene's RF is designed to accommodate building tolerances and movement. Screws are invisible and glass elements are integrated such that they are not subject to any stress loading. All linear glass edges are bevelled, sanded and polished.

Both profile and glass panel junctions are mitred.

Technical facts.

Construction

Optionally single or double glazed

Flexibility

Reversible partitioning, very easy refitting

Glazing

Glass thickness 10 mm, 12 mm, 16 mm (single glazing)

Levelling

Building tolerances and ceiling deflection +27 mm/-24 mm

Standard Acoustics/ sound protection

ETAG 003 Single glazed:

up to 39 dB (Rw) corresponds to 16 mm LSG acoustic glass

Double glazed:

up to 49 dB (Rw) corresponds to 12 mm LSG acoustic glass

06

RF CORRIDOR WALL. SINGLE GLAZED.

RF CORRIDOR WALL. SINGLE GLAZED. The RF single-glazed corridor wall system is available with either folding or sliding doors, attaining up to 39 dB (Rw).

A variety of connecting elements makes it compatible with the R2 work wall and drywalls. Thanks to its consistent design and construction, the second wall panel can easily be refitted when rooms need to be used for other purposes.

The single-glazed RF corridor wall comes in 10, 12 and 16 mm TSG or LSG acoustic glass. Its smart design allows accommodation of building tolerances and ceiling movement.

RSRFR30D022

RSRFR30D010

88

45

RSRFR30D009

50 2x2mm VHB RSRFG00D005

Junction, 90째 angle

RSRFR30D007

RSRFG00D006

RSRFG00D002

Junction, T-connection

Connection, wall connection

RSRFR30D011

RSRFR30D012

RF CORRIDOR WALL. SINGLE GLAZED.

07

RSRFR30R006

4

+15

40 -12

Glass elements.

Glass elements.Single glazed 10 mm, 12 mm, 16 mm in TSG or LSG acoustic glass.

32

Door elements.

Hinged door element: optionally available at room height up to 300 cm or with fan light element up to 350 cm.

RSRFG00D020

RSRFR30D005

Ceiling connection (single glazed)

Sliding door element: frameless, available at room height up to 300 cm or with fan light element up to 350 cm.

Junction.

Vertical junction: to absorb tolerances and to connect to R2 organiser wall and drywall.

86

32

90° / 270° junction: bevelled for corner formation.

4

Open wall end: variable glass edge.

44,5

±12,5

Variable junction: bevelled for variable corner formation.

RSRFG00D028

Floor connection (single glazed)

RSRFR30D003

Connections: T-connection, wall connection (solid wall or drywall) and facade connection.

08

RF CORRIDOR WALL. DOUBLE GLAZED.

RF CORRIDOR WALL. DOUBLE GLAZED. The RF double-glazed corridor wall system is available with hinged door and extends up to 49 dB (Rw). A variety of connecting elements makes it compatible with the R2 organiser wall and drywalls. The double-glazed RF corridor wall comes in 10 and 12 mm TSG or LSG acoustic glass. Its smart design allows accommodation of building tolerances and ceiling movement.

RSRFR30D021

RSRFR30D014

88

45

RSRFR30R013

2x2mm VHB RSRFG00D008

Junction, 90째 angle

RSRFR30R008

RSRFG00D010

RSRFG00D001

Junction, T-connection

Connection, wall connection

RSRFR30R015

RSRFR30R016

RF CORRIDOR WALL. DOUBLE GLAZED.

09

RSRFR30R001

Glass elements.

4

+15

40 -12

Double glazed 10 mm, 12 mm, in TSG or LSG acoustic glass.

32

Door elements.

Hinged door element: available at room height up to 300 cm or with fan light element up to 350 cm.

Junction.

RSRFG00D019

RSRFR30R006

Ceiling connection (double glazed)

86

Vertical junction: to absorb tolerances and to connect to R2 organiser wall and drywall.

90° / 270° junction: bevelled for corner formation.

Variable junction: bevelled for variable corner formation.

44,5

±12,5

4

32

Connections: T-connection, wall connection (solid or drywall) and facade connection.

RSRFG00D029

Floor connection (double glazed)

RSRFR30D004

10

RF CORRIDOR WALL. SLIDING DOOR WITH FAN LIGHT.

RF CORRIDOR WALL. SLIDING DOOR WITH FAN LIGHT.

32

4

40 -12

+15

The RF sliding door element is frameless and available with fan light element up to 350 cm. The frameless sliding door panel is placed in front of the fixed glazing and is not restricted by any door frame. The sliding door has excellent sliding properties and is installed together with the single-glazed RF corridor wall. The lateral excess length that projects is a deliberate design element that enhances the impact of the sliding door element.

RSRFG00D011

RSRFR30D005

Ceiling connection (single glazed)

38,5 20

Ø 32

2106

RSRFG00D013

44,5

±12

38,5

Door guide – sliding door with fan light

RSRFG00D014

Floor connection – sliding door

RSRFR30D001

RF CORRIDOR WALL. SLIDING DOOR WITH FAN LIGHT.

11

RSRFR30R008

68,5

25

68,5

Gas pressure spring for shock absorbance

RSRFG00D058

RSRFG00D018

12

RF CORRIDOR WALL. SLIDING DOOR AT ROOM HEIGHT.

RF CORRIDOR WALL. SLIDING DOOR AT ROOM HEIGHT. The sliding door element is frameless and available at room height up to 300 cm. The frameless sliding door panel is placed in front of the fixed glazing and is not restricted by any door frame. The sliding door has excellent sliding properties and is installed together with the single-glazed RF corridor wall. The lateral excess length that projects is a deliberate design element that enhances the impact of the sliding door element.

RSRFG00D012

RSRFR30D002

350

Door guide – sliding door ar room height

RSRFG00D015

RSRFG00D016

44,5

±12

38,5

Handle – sliding door

RSRFG00D014

Floor connection – sliding door

RSRFR30D001

RF CORRIDOR WALL. SLIDING DOOR AT ROOM HEIGHT.

13

RSRFR30R007

68,5

25

68,5

Gas pressure spring for shock absorbance

RSRFG00D058

RSRFG00D018

14

RF CORRIDOR WALL. HINGED DOOR WITH FAN LIGHT.

RF CORRIDOR WALL. HINGED DOOR WITH FAN LIGHT.

32

32

4

4

+15

40 -12

+15

40 -12

The hinged door element is available with fan light element up to 350 cm. All elements have a consistent design and construction and are perfect down to the smallest detail. The fixed glass element remains unchanged and is mounted flush with the door. Because the door frame fittings and hardware of the door element are concealed behind the fixed glass element, the RF corridor wall features a homogeneous front design. The folding door element is very effective acoustically.

RSRFG00D020

Ceiling connection (single glazed)

RSRFG00D019

RSRFR30D006

Ceiling connection (double glazed)

2106

20

2106

RSRFG00D024

RSRFG00D022

Top stop, folding door with fan light (double glazed)

44,5

44,5

±12,5

±12,5

32

32

Top stop, folding door with fan light (single glazed)

RSRFG00D023

Floor connection – folding door (single/double glazed)

RSRFG00D023

Floor connection – folding door (single/double glazed)

RSRFR30D020

RF CORRIDOR WALL. HINGED DOOR WITH FAN LIGHT.

15

RSRFR30R004

50

86

14,5

32

20

Door width - 77mm Door width.

RSRFG00D026

Door handle set – folding door (single glazed)

RSRFG00D027

16

RF CORRIDOR WALL. FOLDING DOOR AT ROOM HEIGHT.

RF CORRIDOR WALL. FOLDING DOOR AT ROOM HEIGHT.

32

4

+15

40 -12

The folding door element is available for room heights up to 300 cm. All elements have a consistent design and construction and are perfect down to the smallest detail. The fixed glass element remains unchanged and is mounted flush with the door. Because the door frame fittings and hardware of the door element are concealed behind the fixed glass element, the RF corridor wall features a homogeneous front design. The folding door element is very effective acoustically.

RSRFG00D021

44,5

±12,5

32

Top stop, folding door at room height

RSRFG00D023

Floor connection – folding door (single/double glazed)

RSRFG00D025

Door handle set – folding door with/without fan light

RF CORRIDOR WALL. FOLDING DOOR AT ROOM HEIGHT.

17

RSRFR30R003

50

86

14,5

32

20

Door width - 77mm Door width.

RSRFG00D026

Door handle set – folding door (single glazed)

RSRFG00D027

18

RF CORRIDOR WALL. WALL CONNECTION.

RF CORRIDOR WALL. WALL CONNECTION. The wall connection allows the perfect connection to any wall system (such as drywall) or facade connection.

The transparent glass elements are bonded so as to produce a uniform, flush and aesthetically clean design.

Vertical bonding of glass panels and profiles with adhesive. The aluminum pilaster strip is a design feature and protects the glass edge.

The aluminum窶田oated connection element is adjusted accordingly and the sealant system allows it to attain a high sound insulation value.

Either for single or double glazed. Thanks to its consistent design and construction, the second wall panel can easily be refitted when rooms need to be used for other purposes.

Its smart design allows accommodation of building tolerances.

43

ﾂｱ12,5

Aluminium coated RSRFG00D056

RSRFR30D040

Wall connection (double glazed)

RSRFR30D041 RSRFR30D010

Wall connection (single glazed)

RF CORRIDOR WALL. VERTICAL CONNECTION.

19

RF CORRIDOR WALL. VERTICAL CONNECTION. The bandraster allow the connection of Bene wall systems as well as connections to different structural conditions (such as drywall).

The transparent glass elements are bonded so as to produce a uniform, flush and aesthetically clean design.

Vertical bonding of glass panels and profiles with adhesive.

Its design and sealant system allows the vertical connection to attain a high sound insulation value. Acoustic separation is provided with two sealant levels on the double glazed variant.

Either for the single or double glazed variant or for the exchange of single to double. Thanks to its consistent design and construction, the second wall panel can easily be refitted when rooms need to be used for other purposes.

Its smart design allows accommodation of building tolerances.

RSRFG30D032

RSRFG30D033

RSRFR30D034

45

Cover proďŹ le

10 mm ESG

+8

19 12 -0 50 RSRFR00D039

Vertical connection (double glazed)

RSRFR00D040

Vertical connection (double glazed)

RSRFR00D041

Vertical connection (single/double glazed)

20

RF CORRIDOR WALL. RF T-CONNECTION.

RF CORRIDOR WALL. RF T-CONNECTION. The RF T-connection allows the 90 degree connection to the RF corridor wall.

The transparent glass elements are bonded so as to produce a uniform, flush and aesthetically clean design.

Vertical bonding of glass panels and profiles with adhesive. The aluminium pilaster strip is a design feature and protects the glass edge.

Either for the single or double glazed variant or for the exchange of single to double. Thanks to its consistent design and construction, the second wall panel can easily be refitted when rooms need to be used for other purposes.

RSRFR30D036

RSRFR30D037

45

+8

72 -2

91

RSRFR30D035

+8

19 12 -0 50 RSRFG00D049

RSRFG00D048

RF T-connection (double glazed)

RF T-connection (double glazed)

RSRFG00D050

RF T-connection (single/double glazed)

RF CORRIDOR WALL. RG T-CONNECTION.

21

RF CORRIDOR WALL. RG T-CONNECTION. The T-connection allows the 90 degree connection to the RF corridor wall. The glass bayonet serves as the connection for the transition to the R2 organiser wall as well as the connection to different structural conditions (such as drywall).

Its design and sealant system allows the vertical connection to attain a high sound insulation value. Acoustic separation is provided with two sealant levels on the double glazed variant.

Either for single or double glazed. Thanks to its consistent design and construction, the second wall panel can easily be refitted when rooms need to be used for other purposes.

Its smart design allows accommodation of building tolerances.

The glass bayonet with 16 mm glass thickness. Optionally available in LSG acoustic glass.

RSRFG30D030

RSRFR30D031

45

58

Âą5

25

RSRFG30D029

+8

19 12 -0

50

RG T-connection (single glazed)

RSRFR00D051

RSRFR00D052

RG T-connection (double glazed)

RSRFR00D053

RG T-connection (single/double glazed)

22

RF CORRIDOR WALL. R2 T-CONNECTION.

RF CORRIDOR WALL. R2 T-CONNECTION. The R2 T-connection allows the 90 degree connection of the R2 organiser wall to the RF corridor wall. This type of connection allows the linking of different systems and variants and provides a great deal of freedom in configuration.

The aluminium pilaster strip is a design feature.

The transparent glass elements are bonded so as to produce a uniform, flush and aesthetically clean design. Vertical bonding of glass panels and profiles with adhesive. Either for the single or double glazed variant or for the exchange of single to double. Thanks to its consistent design and construction, the second wall panel can easily be refitted when rooms need to be used for other purposes.

RSRFG30D027

RSRFG30D028

45

72

Âą2

RSRFG30D026

+8

19 12 -0 50 RSRFR00D042

R2 T-connection (double glazed)

RSRFR00D043

R2 T-connection (double glazed)

RSRFR00D044

R2 T-connection (single/double glazed)

RF CORRIDOR WALL. GK T-CONNECTION.

23

RF CORRIDOR WALL. GK T-CONNECTION. The GK T-connection allows the 90 degree connection to the RF corridor wall. The connection is neutral (decor white) and matches different structural conditions as an enclosed bayonet. 16 mm thickness with two dry seals.

Either for single or double glazed. Thanks to its consistent design and construction, the second wall panel can easily be refitted when rooms need to be used for other purposes.

RSRFG30D023

RSRFG30D024

RSRFG30D025

70

10 mm ESG

45

45

45

120

Âą20

Decor white

+8

19 12 -0 50 RSRFG00D045 RSRFR30D007

GK T-connection (single glazed)

RSRFG00D046 RSRFR30D011

GK T-connection (double glazed)

RSRFR30D047 RSRFR30D012

GK T-connection (single/double glazed)

24

RF CORRIDOR WALL. R2 LINEAR CONNECTION.

RF CORRIDOR WALL. R2 LINEAR CONNECTION. The R2 linear connection allows the linear connection of the RF corridor wall to the R2 organiser wall. This type of connection allows the linking of different systems and variants and provides a great deal of freedom in configuration.

The aluminium pilaster strip is a design feature.

The transparent glass elements are bonded so as to produce a uniform, flush and aesthetically clean design. Vertical bonding of glass panels and profiles with adhesive. Its design and sealant system allows the connection to attain a high sound insulation value.

Either for single or double glazed. Thanks to its consistent design and construction, the second wall panel can easily be refitted when rooms need to be used for other purposes.

Its smart design allows accommodation of building tolerances.

RSRFG00D054

RSRFR30D038

R2 linear connection (double glazed)

+5

38 -3

RSRFG00D055

R2 linear connection (single glazed)

RSRFR30D039

RF CORRIDOR WALL. CERTIFICATES.

RF CORRIDOR WALL. CERTIFICATES.

25

26

RF CORRIDOR WALL. OVERVIEW.

RF CORRIDOR WALL. OVERVIEW.

me

ele

ele

RSRFG00D030

RSRFG00D031

fan

Light height = order measurement - 38.5 mm

G

Order measurement = upper edge of frame

G

s las

lig

igh

ht,

RSRFG00D032

RSRFG00D034

RSRFG00D033

an hf

it rw do d g e n z di la Sli le g g sin

lig

m oo d tr r a laze o o g g d gle din sin Sli ght, i he

Light height = order measurement - 58.5 mm

n

n

me

s las

t,

ht,

lig

he m h roo d h t t i t i r a laze rw rw oo oo g oo d d uble d d zed d d azed e e e g g o la n n ng e gl i i g d i / H H H bl gle gle u sin sin do fan

eg

gl

in t, s

ht,

ed laz

Order measurement = upper edge of frame

eg

l

ub

o t, d

ed laz

RSRFG00D035

RSRFG00D036

RF CORRIDOR WALL. WALL THICKNESS-JOINT PATTERN.

27

RF CORRIDOR WALL. WALL THICKNESS-JOINT PATTERN. Wall thicknesses.

single glazed

double glazed

16 92 12

12 88

12 90

10

10 86 43

44,5

44,5

±12,5

±12,5

4

4

32

32

43

10 86

RSRFG00D038

Joint pattern.

single glazed

RSRFG00D037

double glazed

1x2mm VHB

RSRFG00D004

Junction, linear bonding (1 x 2 mm VHB) transparent

2x1mm VHB RSRFG00D003

Junction, linear bonding (2 x 1 mm VHB) anthracite

1x2mm VHB

RSRFG00D007

Junction, linear bonding (1 x 2 mm VHB) transparent

2x1mm VHB RSRFG00D009

Junction, linear bonding (2 x 1 mm VHB) anthracite

28 RF CORRIDOR WALL. FACTS.

RF CORRIDOR WALL. FACTS. m

o pt

u ht

ig

m

o Ro

he

c 00

3

o pt

u ht

ig

m

o Ro

he

3

o pt

u ht

ig

m

o Ro

he

/3 00

3

Glass

Glass

Glass

Glass

Glass element

TSG

TSG

LSG

LSG

Single glazed

10 mm 12 mm 12 mm 16 mm

10 mm TSG glass

32 db

he

cm

m

0c

o pt

u ht

ig

m

o Ro

RF WALL I

12 mm TSG glass

50

m

c 50

t

en

35

el

s

th wid

m Ele

Width

e nc

era

gh Hi

tol

Ceiling

el

lev

e nc

lev

era

gh Hi

tol

Floor

+15/-12 mm +/-12.5 mm

Standards

Remarks

ETAG 003

45 - 150 32 db

45 - 150

12 mm LSG acoustic glass

36 db

45 - 150

RH 250-300, comprising of 2 x 6 float

12 mm LSG acoustic glass

36 db

45 - 150

RH to 350, comprising of 2 x 6 TSG

16 mm LSG acoustic glass

39 db

comprising of 2 x 8 float

double glazed

+15/-12 mm +/-12.5 mm

10 mm TSG glass

43 db

ETAG 003

45 - 150

12 mm LSG acoustic glass

49 db

45 - 150

Horizontal bonding area Standard (VHB black) Standard (VHB light grey)

ditto for door element and junction

• •

• •

• •

• •

• • •

• • •

• • •

• • •

Vertical joint formation Bonded joint, transparent Bonded joint, anthracite Silicon joint, transparent

Width 2 mm Width 2 x 1 mm Width 3 mm (only single glazed)

Door element

+15/-12 mm +/-12.5 mm

Sliding door glass

0 db

Folding door glass (1 sealing level)

30 db

ETAG 003

100 - 120 30 db

34 db

Opening on office side Values attained with floor sealing and tread plate.

80 - 120

Connections: Connectionssingle glazed/ double glazed 90º or 270º junction

Bevelled cut (2 x 2 mm joint)

Wall connection

+15/-12 mm +/-12.5 mm

Vertical connection

+15/-12 mm +/-12.5 mm

RF T-connection

+15/-12 mm +/-12.5 mm

RG T-connection

+15/-12 mm +/-12.5 mm

R2 T-connection

+15/-12 mm +/-12.5 mm

GK T-connection

+15/-12 mm +/-12.5 mm

16 mm RG connection, 2 x 65 mm

R2 linear connection

Legends:

Standard

Options

INFOBOX • Sound absorption value for glass element as per TGM testing • Sound absorption value for hinged doors as per TGM testing Indicated measurements only apply if sound absorption of built-in structural elements equals values of partitioning.

Built-in elements must be tightly closed without gaps.

• Door width of 100 cm results in clearance of 92 cm • Clearance for handicapped access requires 110 cm door width • Maximum glass panel weight up to 100 kg • ETAG 003, European guideline for the approval of partitioning walls • 16 mm RG connection on scale of 1:10 • Minimum height of fan light 34 cm All information provided for standard version, also project-based.

RF CORRIDOR WALL. GENERAL PARAMETERS.

29

RF CORRIDOR WALL. GENERAL PARAMETERS. Statics.

Technical information required.

Linear distributed load partition wall.

(Bene Sales & Project Support)

LINIENLAST

(basis of calculation: room height 2900mm ) 10 mm TSG, single glazed 760 N/lfm 12 mm LSG, single glazed 900 N/lfm 16 mm LSG, single glazed 1200 N/lfm 10 mm TSG, double glazed 1500 N/lfm 12 mm LSG, double glazed 1500 N/lfm (load-bearing surface 56 x 1000 mm)

•

Installation at building edges.

•

Installation at flooring joints.

•

Installation with limited drilling depths.

(cooling elements/underfloor heating)

Acoustics.

(Test certificates and subsequent measures upon request.)

Point load/door leaf glazing. Door frame (element).

PUNKTLAST

10 mm TSG

850 N/4.82 cm² = 177 N/cm²

12 mm LSG

980 N/4.82 cm² = 204 N/cm²

AKUSTIK

16 mm LSG 1240 N/4.82 cm² = 257 N/cm² (load-bearing area base panel frame = 4.82 cm²)

Installation conditions.

Floor.

Point and linear distributed loads of the partition wall, along with resulting loads, act on the corresponding elements on all floor parts.

Room temperature.

The bonding process requires a minimum temperature of 18°C.

BODEN

Ceiling construction.

Loads (especially those arising from live loads) acting on the partition wall, must be transferred to and carried by the ceiling.

VERKEHRSLAST

Suitable ceiling construction: • Concrete ceiling.

• Suspended ceiling with load-bearing and compression-rigid substructure.

• (e.g. ceiling wall)

TEMPERATUR

Dust-free environment. (RF double-glazed).

Please avoid work that produces dust as partitions must be installed in a completely dust-free environment.

STAUBFREI

Work involving sparks.

After installing glass sheets, please avoid any work on metal parts that produces sparks.

Unsuitable ceiling construction: • Suspended ceiling without load-bearing and compression-rigid substructure.

FUNKENFLUG

Compressive rigidity and form stability of ceiling planking.

The ceiling planking must be sufficiently rigid to withstand compression and be stable in form to avoid being crushed or deformed when the ceiling wall is screwed to the wall.

Logistics.

As per Bene standard.

DECKE

Suitable ceiling construction: • Concrete ceiling.

• Drywall ceiling.

• Other suspended ceilings with bandraster.

• Metal ceilings with rigid panel lining around the fastening area.

Door opening direction.

Unsuitable ceiling construction: • Ceilings with metal panels without rigid lining, mineral wool ceilings with or without injected plaster, such as various acoustic ceilings.

Left hinged door

Left sliding door

OFFICE

Right sliding door

CORRIDOR

OFFICE

CORRIDOR Right hinged door

OFFICE

OFFICE

30

RF CORRIDOR WALL. MATERIAL.

RF CORRIDOR WALL. MATERIAL.

KS Clear glass

ST Etched glass white

SN Etched glass green

Safety glass Safety glass is available in the form of laminated sheet glass (LSG) or toughened safety glass (TSG). In contrast to standard float glass, the danger of injury is reduced considerably on breakage.

Toughened safety glass (TSG) By breaking up into small round pieces, toughened safety glass prevents risk of injury on breakage. During the TSG manufacturing process, float glass is tempered by heating the sheet to approx. 650째C and then cooled down using cold air. TSG is very resistant to the impact from blunt objects..

Laminated sheet glass (LSG) With this type of safety glass, the tear-resistant foil (PVB) ensures that, on breakage, glass shards (LSG from float glass)/ glass grain (LSG from TSG) remain on the foil, thus considerably reducing the risk of injury.

Black bonding surface

Light grey bonding surface

AL Aluminium anodised

RF CORRIDOR WALL. NOTES.

NOTES.

31

RF FLURWAND. TECHNIK./WP_MB072E/032007

BENE HEADOFFICE A-3340 WAIDHOFEN/YBBS SCHWARZWIESENSTRASSE 3 PHONE +43-7442-500-0 E-MAIL OFFICE@BENE.COM AUSTRIA: BREGENZ, GRAZ, INNSBRUCK, KLAGENFURT, LINZ, SALZBURG, ST. PÖLTEN, VIENNA. BULGARIA: SOFIA. CZECH REPUBLIC: PRAGUE. GERMANY: ASCHAFFENBURG, BERLIN, BONN, DÜSSELDORF, ESSEN, FRANKFURT, HAMBURG, HANNOVER, LEIPZIG, MANNHEIM, MUNICH, SCHWENNINGEN, STUTTGART-MÖHRINGEN. HUNGARY: BUDAPEST. IRELAND: DUBLIN. MIDDLE EAST: DUBAI. POLAND: WARSAW. ROMANIA: BUCHAREST. RUSSIAN FEDERATION: MOSCOW. SERBIA: BELGRAD. SLOVAKIA: BRATISLAVA. SLOVENIA: LJUBLJANA. SWITZERLAND: WALLISELLEN. UKRAINE: KIEV. UNITED KINGDOM: LONDON. TRADING PARTNERS: BELGIUM: ZAVENTEM. CROATIA: ZAGREB. DENMARK: COPENHAGEN. FRANCE: LILLE, LYON, MONTPELLIER, NANTES, NICE, PARIS, TOULOUSE. GERMANY: BAYREUTH, BREMEN, DONAUWÖRTH, ERLANGEN, MÜNSTER, NÜREMBERG, REGENSBURG, SAARBRÜCKEN, SAARLOUIS, SÜSSEN. ITALY: MERAN. KUWAIT: KUWAIT. LIECHTENSTEIN: SCHAAN. LUXEMBOURG: LUXEMBOURG. NETHERLANDS: HAAKSBERGEN, ROTTERDAM, WILP. QATAR: DOHA. SPAIN: BARCELONA.

Prozessänderungen und technische Änderungen vorbehalten.

HTTP://BENE.COM