DON’T CHANGE OIL

Achieve Carbon Savings And Financial Savings In One Simple Maintenance Change

Are you about to change your machines oil – just because its dirty or wet ? ….. or do you still utilise time-based preventative maintenance to change oil and filters?

Why stop that machine for a day?

Why laboriously empty all that old oil into transfer?

Why pay to have it taken away?

Why pay for a full tank of brand-new oil?

…and why to see it immediately get dirty from all the old oil pushing out of the lines and cylinders ?

There is a better solution that saves money; is kinder to the oil, kinder to the machine and kinder to the environment!

- Don’t change oil – KLEENOIL

Oil can be cleaned – in tank –during operation – to levels that will maintain it to as ‘clean as new’!

KLEENOIL – Natural Cellulose Depth

By-pass oil filtration – has an ultra-fine, slow principle of cleansing & drying oils. This is a method to continuously filter a percentage of oil to far finer levels to remove the particulates, sludge & moisture that would normally be missed by standard filtration. By continuously removing these contaminants the aging effect of such catalysts are minimised so maintaining a constant oil cleanliness to within OEM parameters. The result – no need to change oil.

The Carbon benefits

• OIL … consider if every machine on your site was to just double its oil life? You would half your oil consumption; as a finite resource & equally half your oil wastage, contributing to carbon savings throughout the entire supply chain from delivery through to waste.

• PARTS ... Through constant cleanliness = less abrasion = better operation = equipment lasts longer, with less ‘blockages’, sticking valves or failing pumps…. pumps seem to be an accepted consumable & they shouldn’t be if looked after properly – all these ‘replacement parts’ if reduced; contribute to not only financial but carbon savings throughout the supply chain.

• EFFICIENCY – Cleaner, better operation will result in less downtime and interruption that potentially wastes on power supply and human intervention.

The financial savings

• OIL SAVINGS - What was your oil spend last year? Extend oil life by as much as 10 times alongside scheduled condition monitoring.

• PARTS SAVINGS – Constantly cleaned oils reduces wear on components and the inevitable result is increased machine life. Reduce machine & component wear

• DOWNTIME – Less down time is simply more uptime! Increase machine availability through reducing downtime.

Employing affordable fine filtration alongside condition monitoring will give confidence in extending oil life safely and KLEENOIL will do all of that for you on an agreed free maintenance schedule.