Nominations Close August 31
CADspace becomes third Solidworks reseller in Australia
Plastics Industry Achievement Awards 2013 The Plastics Industry Event of the year acknowledges achievements in the plastics industry Nominate TODAY
Additive manufacturing: from scanning to designing to printing
Obtain exposure for your achievements Join your industry colleagues for the Presentation Dinner September 18 Kooyong Lawn Tennis Club Register TODAY
Personal Water Craft Gets Buoyancy Lift With Expandable Interpolymer
PlastixTODAY is published & distributed by PlastixANZ 68 Parkhurst Dve., Knoxfield 3180 Victoria Ph: 03 9018 7674 Email: info@plastixanz.com.au
Ausplas Sponsor PlastixANZ Plastics Industry Achievement Awards
Reed Exhibitions, presenters of Ausplas, are proud to support the plastics industry and sponsor the PlastixANZ Plastics Industry Achievement Awards Ausplas, Australia’s national trade exhibition for the plastics industry and the longest-running plastics industry event in the southern hemisphere, will enter a new era in 2014 with its incorporation into Reed Exhibitions Australia’s National Manufacturing Week (NMW). Read full press release here. Ausplas will participate every three years and the next edition of Ausplas will be held alongside NMW from 13-16 May 2014 at Sydney Showground, Sydney Olympic Park. This will be the first time in 24 years that Ausplas will be staged in Sydney. The Ausplas @ NMW 2014 floor plan and contract are now available for exhibitors to view and begin planning budgets and space preferences for Ausplas 2014. As a launch addition, space is limited. Contact one of the account managers to book your space today. View Floor plan View Contract
Cory McCarrick - T: 02 9422 8720 - E: cory.mccarrick@reedexhibitions.com.au Stephen Cuff – T: 02 9422 8921 – E: Stephen.cuff@reedexhibitions.com.au Guy Freebody – T: 02 9422 2568 - E: guy.freebody@reedexhibitions.com.au
Plastics Industry Achievement Awards 2013 NOMI NATIO N CLOS E AUG S UST 31 NOMI NAT TODA E Y
Pres e Kooy ntation D o i Wed ng Law nner n nesd ay S Tennis C epte mbe lub r 18 9 Aw a rd s pres ente d Reg ister Toda y
r e k a e p S t s Gue iper P Tim or ct e r i D n a i l a r p t u s o u r A G y r t s Indu
ME LB OU
RN E
OC 9 TH CO T NV OB - 10 T H EN TIO ER NA 2 ND 01 EX 3 H
IBI TIO N
CE NT RE
FREE Visitor Registration now open
www.wasteexpo.com.au See it all under one roof!
2 days dedicated to waste management, recycling & sustainability solutions:
GOVERNMENT
CORPORATE
COMMERCIAL
HEALTHCARE
HOSPITALITY
TRANSPORT
PANEL SESSIONS & CASE STUDIES CONFERENCE PROGRAM waste wise melbourne networks BUSINESS NETWORKING SEMINAR LIVE DEMONSTRATIONS 100'S OF BRANDS AND EQUIPMENT ON DISPLAY SEE THE LATEST TECHNOLOGIES FROM LEADING SOLUTION PROVIDERS
FEATURING SEMINARS BY:
SUPPORTED BY:
MEDIA PARTNER:
CO-LOCATED WITH:
FOR MORE INFORMATION AND BOOKING DETAILS PLEASE CONTACT THE WASTE EXPO TEAM
A 2/20 Meta St, Caringbah NSW 2229
T +61 2 9528 5791
F +61 2 9028 7023
E sales@wasteexpo.com.au
W www.wasteexpo.com.au
News
Win 3D Systems 3D printer
3D Systems provide CubeÂŽ 3D printer as door prize for Plastics Industry Achievement Awards. Register today for the Awards presentation dinner Register here
ALPS introduces New Large Bottle Version of High Speed Linear Leak Tester ALPS (Air Logic Power Systems) of Wisconsin USA, a global leader of in-line container leak inspection equipment, have released a new version of their successful Speed Glider high speed linear leak tester, called the Speed Glider 3.85 that has been specifically designed for larger container sizes. The 3 station continuous motion leak tester is capable of rates up to 185 bottles per minute and has a container pitch of 266mm and is nominally capable of container heights of up to 215mm. The Timing Screw provides positive container handling and control, in order to ensure high
efficiencies and quick/efficient changeovers at the higher rate demands. The system can be easily mounted to existing contiuous conveyor systems, eliminating the need for additional conveyors and bottle transfers. Cameras for vision inspection can be placed after the leak tester, with the leak tester's timing screw acting as an automatic spacing device. The Speed Glider 3.85 offers a higher speed, higher efficiency and easier to setup/changeover alternative to "bottle stop" linear leak testers that stop containers 'on the fly' using cylinders.
Petainer’s PET Kegs Allows Significant Costs Reduction For Drink Companies
ALPS (Air Power Logic Systems) are represented in Oceania by HBM Plastics & Packaging Technologies.
Latest News 3D Systems Launches Cubify Sculpt The Simplest, Most Powerful And Intuitive 3D Sculpting Tool
- Creates Instant Printables For At-Home Or Cloud Printing .... More
3D printer to be sent to International Space Station NASA aims to have 3D printers designed by Made In Space operating on the International Space Station in June 2014. The Telegraph and others report that plastic parts will eventually be created on-demand, fulfilling roles like printing up broken parts. "As you might imagine on ISS, whatever they have available in orbit is what they have to use,” said Nasa's Marshall Space Flight Centre’s Niki Werkheiser, according to the Telegraph. "Like they do on the ground, parts get broken or lost and they have to wait for replacement parts or we have to launch multiple spares. The concept is often compared to the replicator machine in Star Trek...MORE
Stratasys and MakerBot Complete Merger Merger enhances Stratasys' leadership position in 3D printing and additive manufacturing and enables the company to offer world's most popular desktop 3D printer ... MORE
Latest News Automotive applications drive the global long fiber thermoplastics market Global consumption of Long Fiber Thermoplastics is projected to exceed 326 thousand tons by 2018, driven by burgeoning automotive applications as per Global Industry Analysts, Inc. Driven by advantages such as creep resistance, low Techspan New Zealand reports that ENGEL will participate at the upcoming Drinktec 2013 exhibition in Munich, 16th 20th September.
warpage, and impact strength, Long Fiber Thermoplastics (LFTs) are finding increased use as metal substitutes in a number of structural and semi-structural applications. Demand for LFT worldwide grows in tandem with the developments in the automotive industry, as about 78% of LFT materials go into manufacturing structural parts of automobiles. The trend towards sleek, small, lightweight vehicles is playing an instrumental role in increasing opportunities for LFT across the automotive sector because
Compostable NatureFlex Film Adopted By Fair Trade Organic Tea Company
UK-based Innovia Films says its compostable cellulosebased material, NatureFlex NVR, has been chosen by French Fair Trade organic
the stiffness offered by the composite material is ideal for structural parts of shorter lengths. End-of-Life legislations, particularly in Europe, which make recycling of materials compulsory is also driving growth in the market. Long Glass Fiber Reinforced Polypropylene (LGFRP) is growing in popularity among auto makers, owing to the
tea company, Les Jardins
latter’s mono-material construction that enables recyclability.
de Gaïa, to pack its range
The lightweight, recyclability, and low cost advantage enjoyed
of organic teas in
by LFTs will continue to offer long term growth opportunities.
individual sachets.Jean Baptiste Dubois, Marketing of Les Jardins de Gaïa,
LFT consumption in non-automotive applications is forecast to grow at a CAGR of 5.3% ... MORE Polystruct LFT
notes, “We wanted to keep our product safe and in premium condition and do something that would stand out from the crowd. NatureFlex films ensure we are proud of our packaging!” ... MORE
available in Australia from Duromer Products
Unisort Flake Colour sorting of granulated plastic, ground materials or metals in the form of fine-grain materials: Reclaiming pure secondary raw materials without contaminants is a complex task. Achieving high-value recycling requires that even the smallest size particles are reliably separated according to their types and colours. The UniSortŽ Flake is right for your fine-grain materials sorting of plastics, metals or minerals. Feed material: plastic flakes, electronic scrap Overview Throughput per module: approx. 0.4–2 t/h, depending on the material to be sorted Degree of separation: 85% or better, depending on previous contamination Purity: 90% or better, depending on previous contamination Unit size (h,w,l): 2,000 x 1,500 x 4,100 mm Weight: 1,700 kg Installed load: approx. 11 kW Air requirement: approx. 1,5 Nm3/min, depending on the material to be sorted Fraction size: 3 – 30 mm for colour sorting, Detections: > 24 million/sec. for colour sorting,Nozzle bar: 120 high-speed valves
" What a ride " Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming --WOW -- " What a ride!!! " James Fineous McBride
Business Vision – Don‘t be Without it By Scott Bywater
Have you ever heard the saying… ―Be true to yourself‖? Let‘s look into that saying a little more deeply. Because you essentially have two selves… 1. A Past Self 2. A Future Self Being true to your past self is easy – you just require a sharp memory and the ability to do what you have always done. Simple, really – but remember: if nothing changes, nothing changes. However, if you are going to be true to your future self, you need something very few people possess… VISION That‘s right. Without vision, you will wander aimlessly. Without vision, you won‘t know what to focus on. Without vision, you will allow others to direct you and guide you off the path. The truth is, vision is the most important asset you have… and when it becomes stronger than your memory, you will transform your future. Anthony Robbins says: the past does not equal the future. But it does if you dwell in your memories instead of your vision. So today, take some time to invest in clarifying your vision. Decide what you want. Because whether you realise it or not… What you see is almost always what you get. Master the art of SEEING better and you will BECOME better. Do you want to learn the easiest way to get more customers fast? Leading advertising copywriter, Scott Bywater, has just completed his brand new guide "7 Ways to Get More Customers" where he outline everything so it's as easy as 1, 2... 3. Download it for free by visiting http://www.copywritingthatsells.com.au/ plastix
CATEGORY AWARD SPONSORS 2013
Plastics Industry Achievement Awards 2013 Category Sponsors View nomination criteria View Presentation Dinner details
To nominate for an award, click on the award category below Nominations close August 31 PlastixANZ Plastics Industry Excellence Award -- Presented by Tim Piper PlastixANZ plastics industry achievement award for excellence. This award recognizes the best business initiative and outstanding achiever for 2013.
Plastics industry Achievement Award Categories Duromer Plastics Industry Achievement Award for Export
This award recognizes companies that have achieved sustained business export growth
Steinert Australia Plastics Industry Achievement Award for Environment
This award recognizes outstanding effort to increase the awareness for and management of the environment
BASF Australia Plastics Industry Achievement Award for Design & Innovation
This award recognizes break-through design & innovation in the plastics industry, creative successful design of plastic/s components or use of technology.
Australian Vinyls Plastics Industry Achievement Award for Manufacturing and Best Practice Award This award recognizes best manufacturing practices, process and productivity improvement
Applied Machinery Plastics Industry Achievement Award for Marketing / Distribution
This award recognizes creative & efficient methods for marketing, distribution & supply chain management and process improvement.
Kangan Institute Plastics Industry Encouragement Award Award to encourage continuing development in the plastics industry.
ComtecIPE - Manufactured in Australia Award
Award to recognises manufacture of raw materials, equipment plus plastic products & plastic components manufactured in Australia
ComtecIPE - Manufactured in New Zealand Award
Award to recognises manufacture of raw materials, equipment plus plastic products & plastic components manufactured in New Zealand
Are you in the plastics industry? – you can be nominated
PLASQUIPS ONLINE SHOP - NOW OPEN
A revolution in the way you purchase your CNC Tools & Tool holding Systems is here now – PLASQUIP SALES all-new ONLINE STORE is NOW OPEN to make purchasing these tools a breeze, as well as many other items including: * Saw Blades * Plastic Weld Rods * Hot Air Guns * Extrusion Welders * Laser Tubes Make www.plasquip.com.au your first point of call and be rewarded with our exclusive Plasquip Rewards program – we value your ongoing business, and this is our way of rewarding your loyalty..
PLASQUIP SALES has taken delivery of new stock of the revised 380V Buffing Machine from IPLEX of Milan Italy. The 380V is the only Buffing Machine that is available on the market as a stock item that is specifically designed for Acrylic Sheet Edge-Polishing, and incorporates a number of fantastic features for the optimum performance: Provided with special guarding to reduce the chance of operator injury and/or discomfort Incorporates 305mm Ventilated Buffing Wheels which will not clog up or overheat Set at a lower RPM to reduce the problems with burning the acrylic Powerful 1.5HP/380V/3PH motor Set on a Pedestal Floor stand for optimum working height Provided with a large Emergency Stop Instead of using a machine that was designed for metal applications, why not invest in a Buffing Machine that was specifically designed for acrylic and other plastic sheet applicationsAnd for the ultimate performance from your 380V Machine, we recommend the use of the IPLEX PoliBrill Buffing Compound – this is a dry paste compound that is far superior in performance to any other wax-based compounds available on the market currently. The complete380V Buffing Machine (including all Buffing Wheels & Adaptors) is available for $2,985.00 + GST and the PoliBrill Buffing Compound is available for $25.00/1.2kg Bar.
Reprinted from editorial, manufacturers Monthly, August issue -- Cole Latimer - Managing Editor
Are we in for a new Industrial Revolution? Digital revolution perhaps? Every day the crew here at manufacturers monthly he is the major newspapers sending the death knell for the manufacturing industry, but what they failed to understand is that the industry isn't dying. Not in the slightest – it is evolving, and changing into something new. We are entering new territory here – 3-D printing while it is been around for a while now, the technology in capability to mass-produce extremely high quality and unique products using the process hasn't really been around until fairly recently. Smaller 3-D printing machines, the capability of producing highly machined parts, and working parties opening new doors manufacturers and others outside of the industry. The new technology is also opening up the world manufacturing to more people outside of the wider Australian primary and secondary industries, allowing for amazing designs and products are previously wouldn't have been possible to construct without major investment. An 3-D printing has really captured the imagination of the general public in a way that the previous manufacturing industry was never able to. Sitting within the manufacturing industry as we do, we know how this technology has been utilised for some time, but this rampant uptake of its potential over the last few years is simply astounding. 3-D printing festival, a new makers movement, the London School of design has even installed 3-D printers and its museum to allow members of the general public to make things. The way things are picking up, almost without many noticing, must be reminiscent of the swift, almost overnight buildup experienced by those during the Industrial Revolution. Except this is now putting the revolution in the hands of the people, instead of a few of the capacity and finance to mass-produce. It could even lead to a revival of cottage industries, as people take the manufacturing of specialist goods in small batches back in their homes or smaller factories. And all of this is supported by the widespread use of CAD and came helping people to access these designs. Cloud computing and the infinite computing ability provides is also helping the smaller manufacturers to a degree. Sophisticated modelling and more's simulations can be carried out faster, even from the home. It also takes away the capital intensive nature inherent to manufacturing. Within a generation or two we could see the end to massive factories, as more people move to the cloud and trade designs, and they white have the large overheads in terms of planet and site.
NE\A/ PHQNE NUMBERS Our phone numbers have recently changed, please let the relevant people in your organisation know.
General Enquiries: (02) 9426 7300 Fax: (02) 9426 7399
Customer Service: (02) 94267351, Accounts: (02) 9426 7354 Purchasing: (02l, 9426 7350 Logistics: (02') 9426 7355
Postal and delivery addresses as well as emails and
mobile phone numbers remain unchanged.