Earthmovers & Excavators issue 412

Komatsu PC138US-11 with 3D Machine Guidance and Payload

Inclusions:

• Factory fit Retrofit Kit (RFK)

• 3 year Smart Construction Support Subscription

• 3 Year Smart Construction Pilot access

Technology Advisor Support • Standard Quick hitch

Plus:

4-Year /8000 Premium Warranty

Komplimentary maintenance *

4.79% interest rate p.a.

Issue

News

In this issue, Cat releases a new D10 model and two soil stabilisers, Tricon announces new Environmental brand, Hydraulink acquires CCR Hose & Fittings, FAE releases new BL1/SSL mulcher, Komatsu announces new CD955-7R mining grader and showcases hydrogen concept excavator, Epiroc to purchase key assets in Schramm Australia , Rex Minerals announces Hitachi mining fleet, Komatsu and Toyota to develop light autonomous vehicle, Tigercat unveils 612 grapple skidder, Dressta releases TD-15M crawler dozer, Trimble updates laser scanning system, Rio Tinto switches to biodiesel, Snowy 2.0 project completes second tunnel and much more 6–8, 40–65

Features

Editorial & Design

Editor Cat Fitzpatrick

catherine.fitzpatrick@ primecreative.com.au

Contributors

Lincoln Bertelli

Art Director Daz Woolley

Managing Editor Andrew Hobbs

Advertising

Brand Sales Manager

Greg Messenger 0429 187 751 greg.messenger@primecreative.com.au

Account Coordinator

Paul McQuillan 0422 049 958

NSW Ben Coleman 0466 545 664

QLD Emily Schlegal 0466 317 555 Subscriptions

www.tradeearthmovers.com.au/subscribe

Ph

Executive CEO John Murphy

COO Christine Clancy

NEW RANGE

The new H-Series wheel loaders offer extremely reliable yet simple operation, low maintenace, and outstanding value.

SDLG is a member of the Volvo Group with over 50 years of manufacturing expertise. SDLG wheel loaders are renowned for their reliability and versatility and are an ideal choice for material handling and general construction applications. Introducing 3 new models to the outstanding SDLG wheel loader range:

New 11-tonne L936HLA & L938H, and 13-tonne L946H

High torque, fuel efficient Weichai 6 cylinder engine

Spacious air-conditioned cab with a wraparound pillarless front and rear windscreen

3 year / 6000 hour warranty on all new SDLG machinery

News

Caterpillar says its updated D10 model burns less fuel, increases productivity and improves uptime

New Cat

The new D10 is powered by the Cat C27 engine, which offers aftertreatment solutions to meet US EPA Tier 4 Final/ EU Stage V as well as Tier 2 equivalent emissions standards for other markets. The new model is expected to be released in Australia later in the year, with Australia-specific specs yet to be announced.

The C27 switches power settings based on travel direction to offer up to 20 per cent more power in reverse and reducing cycle times. In addition to delivering productivity gains of up to 3 per cent, the new D10 offers up to a 4 per cent fuel consumption advantage over the D10T2 and up to 10 per cent over the D10T.

The dozer’s new torque converter design with stator clutch automatically frees up the stator when torque

multiplication is not required, improving drivetrain efficiency for reduced fuel consumption. During high-load and retarding conditions, the stator clutch locks without the need for operator input. Load-sensing hydraulics deliver more power to the ground for increased responsiveness and added fuel efficiency. The new cab for the D10 reduces noise and vibration, with operators benefitting from a new multicolour touchscreen display that monitors machine performance and allows machine parameters to be changed to suit the application.

Caterpillar says that life-enhancing upgrades made throughout the drivetrain help to improve component life. Optional Heavy-Duty Extended Life (HDXL) with DuraLink undercarriage

Brand expands

Tricon Group has announced its new brand – Tricon Environmental

Tricon Group’s new Tricon Environmental brand has the exclusive seller status in Australia for Rubblemaster and Arjes Machinery, with a focus on waste and recycled material processors.

Tricon managing director Michael Tripolone says he is excited to be entering a new market.

“The recycling industry in Australia is in the midst of a huge phase of growth and we wanted to be there, partnered with these new customers to harness this growth,” he says.

“We looked at our crushing and screening business and thought that these waste and recycling customers could really get a lot from using these amazing international brands.

“Arjes is a new brand for us and this exclusive partner specialises in shredding,

which we know is in huge demand within the recycling industry.”

This new business will also offer genuine spare parts and servicing for both the Rubblemaster and Arjes brands.

Tricon Group has sold heavy-duty material processing equipment for over

reduces scallop wear, features an 8,000hour bushing seal life and delivers 20 to 40 per cent longer life than the heavyduty undercarriage.

The D10 design offers easy service and maintenance with features like new replaceable push-arm trunnion bearing inserts. The reengineered engine compartment integrates a single-plane cooling system that is up to 30 per cent more resistant to plugging and improves heat dissipation to extend component life. A new 50 per cent larger oil pan improves average oil quality and extends change intervals by up to 250 hours.

20 years through Tricon Equipment, which is the exclusive dealer of Lippmann Milwaukee, Terex MDS and Superior Industries screening and crushing equipment for quarries and mining.

The Tricon Group is headquartered on the New South Wales’ Central Coast. The business is certified Australian owned and operated, and has locations in Newcastle, Wyong and Melbourne.

For more information on Tricon Environmental, visit www.triconenvironmental.com.au

A variety of updates to the D10 design increase productivity and reduce fuel use

The Rubblemaster 120X crushing basalt

The Arjes Titan 950 crushing railway sleepers

H0SES

New range

Australasian hydraulic hose and fittings company Hydraulink has expanded the scale and scope of its operations in WA with the acquisition of CCR Hose & Fittings, to form Hydraulink CCR.

“[The acquisition] merges [the two business’] complementary strengths into one group, with an even stronger overall service offering to the resources sector and WA industry, including 24/7 services through an expanded mobile service fleet, greater fly-in fly-out capability, and on-site containerised workshops that can be placed virtually anywhere to lift uptime,” Hydraulink Australia managing director Denis Matulin says.

“This is a major investment in WA, the benefits of which will progressively flow through to Hydraulink services to mining, drilling and major projects in other areas nationally.”

Hydraulink is a national hose and fittings specialist that also operates in NZ and across the Asia-Pacific region.

CCR is now bringing its assets and experience into Hydraulink’s national network of 14 company-owned sites in Australia, offering mining and surface

drilling clients a substantial increase in inventory levels and an expanded offering, Hydraulink says.

“Our aim with the new combined entity is to take service to a level previously unseen in WA,” Matulin says.

“Being backed by a much larger, financially robust organisation means we will have the power to invest in additional service offerings to meet the growth needs of operations in the region.”

Hydraulink also recently announced it is offering a new range of hoses, designed for harsh environments. The new Enduro spiral hose range features a flexible slim profile, with high wear and abrasion resistance due to a SuperTuff Mine Safety and Health Administration cover.

“When operating in harsh environments, the last thing you need is gear that isn’t up to the task causing delays and loss of production. The new Enduro hoses are designed to increase service life, lower maintenance costs and reduce downtime – without any loss of flexibility or bend radius,” Matulin says.

The FAE BL1/SSL mulcher has been released

MULCHER

The FAE BL1/SSL mulcher has been designed for small skid steers

Forestry focus

FAE has released a new forestry mulcher for small skid steers – the BL1/SSL/VT – for vehicles from 45 to 65 horsepower (36 to 48kW), which can shred vegetation, shrubs and trees up to 10cm in diameter.

It can be used for vegetation maintenance along roadsides, railroad tracks, the banks of canals, rivers, lakes, managing and protecting wildlife habitats, maintaining vineyards and orchards, commercial and residential green areas and sports grounds.

The head is designed for high productivity, durability and easy maintenance.

The BL1/SSL/VT’s variable torque (VT) piston engine boosts mulcher performance compared to a fixed-cylinder engine, increasing torque when an extra boost of power is needed and minimising rotor stalling.

The Bite Limiter technology on this head is ideal for high productivity in managing vegetation, with reliably efficient shredding. The rotor with Bite Limiter technology comes with special wear-resistant steel profiles that limit the reach (bite) of the teeth. This cuts down on power demand and promotes a consistent working speed, for excellent performance when mulching any kind of wood. The Bite Limiter technology also minimises rotor stalling and helps optimise fuel consumption.

The Spike Pro counter blades ensure low power absorption and a finer final product. Spike Pros are interchangeable offset counter blades that enable finer shredding and a smoother flow of wet material. The special design also makes them efficient with very rigid and more flexible vegetation.

Sneak peek

The first two units of Komatsu’s new GD955-7R mining grader have been built, with plans to ship them to Australia in the coming months

Komatsu has announced that the first two units of its brand new mining grader – the GD955-7R – have been built at its Ibaraki Plant in Japan and are now being prepared for shipment to Australia later in the year. These 47-tonne graders will have

426 gross horsepower (318kW) and blade options of either 18ft (5.49m) or 20ft (6.1m).

As yet that is all of the information released about the new model –hopefully it won’t be too long before we get to welcome them Down Under.

Hydraulink recently acquired CCR Hose & Fittings, boosting its mining and drilling capabilities in WA, and released the Enduro range of hoses for heavy duty applications

Hydraulink is offering a new range of hoses

with variable flow rates of 30 to 1,900L/min for water and 30 to 850 L/ min for emulsion to meet site needs. The operator controls additive flow and customises spray width from inside the cab.

Controlled cut

The new Cat RM600 and RM800 reclaimer/stabilisers have been released for full-depth reclamation and soil stabilisation projects

A turbocharged Cat C18 engine gives the RM600 up to 17 per cent more power at 636 horsepower (474kW) than the RM500B, while the RM800 delivers 762hp (568kW).

Featuring a belt-driven rotor drive system, the machine is capable of flush-cutting on the right side. The new System K rotor uses the same cold planer fastener-free, dualtaper toolholder and base block components to deliver superior material quality on a range of projects. Exit and return-to-cut features simplify operation, save time and ensure the machine maintains a consistent depth of cut.

With front-to-rear weight distribution optimised for stability in tough cuts, standard electronically controlled all-wheel drive maximises traction and mobility for the new RM600 and RM800. Four height adjustable legs provide up to + or – 14 per cent (8 degrees) of slope on either side when working on uneven terrain or to maintain traction in challenging soil stabilisation applications.

Two high-tensile, six-rib belts with automatic tensioning prevent slippage, while the rotor drive features a hydraulically actuated, heavy-duty clutch that does not require adjustment. The versatile rotor can be configured with bolt-on paddle toolholder protection for fulldepth reclamation applications or wedge protection to reduce drag.

The new models cut 2,438mm wide at up to 508mm in depth. Adjusting the front and rear mixing

chamber doors enables modification of material gradation, and an easyto-read indicator on the touchscreen display informs the operator of door positions. A rear rotor chamber door float feature simplifies operation by allowing the operator to select the desired down pressure. RM600 and RM800 also offer bi-directional cutting capability.

With a 3.1m inside turning radius there are four steering modes – front only, rear only, crab and coordinated. Water and emulsion spray systems are available for the new machines, and the emulsion system features self-cleaning nozzles and is designed to deliver water as well as bitumen emulsion. Computerised metering delivers accurate application rates

Asset buy

Epiroc has agreed to purchase the key assets of Schramm Australia, a manufacturer of products for reverse circulation drilling.

Since February 2023, Schramm Australia, based in Perth, has been in voluntary administration. The assets include intellectual property as well as two production facilities near Perth and two service centres located in Queensland and South Australia. Schramm Australia’s employees will be offered employment at Epiroc.

“The Schramm products and brand are well known as a global leader in reverse

Front- and rear-mounted cameras provide configurable guidelines on the touchscreen display while two standard cameras mounted above the front and rear mixing chamber doors give operators visibility to obstructions and material gradation. Optional side-mount cameras provide views to each side of the machine.

The standard compressed air system can power pneumatic tools and offers two access points to reduce the time for rotor bit changes. Service mode allows the engine to run while the machine is locked out, supplying compressed air so the rotor can be safely serviced

The new models feature built-in diagnostics to monitor machine systems, alert the operator of performance issues and simplify troubleshooting. Standard Product Link provides machine data and enables the use of Cat Remote Services.

The RM600 and RM800 reclaimer/stabilisers are available now in Australia.

circulation technology,” Epiroc president and CEO Helena Hedblom says.

“We look forward to welcoming the strong team at Schramm Australia to the Epiroc Group.”

STABILISERS ,

The asset purchase is expected to be completed in the second quarter 2023. The transaction is not subject to a disclosure obligations pursuant to the EU Market Abuse Regulation.

The RM600 and RM800 reclaimer/ stabilisers are available in Australia

Epiroc to purchase key assets in Australian mining equipment manufacturer Schramm Australia

Twice as nice

Equipment is bringing not one, but two lines of SDLG machinery to Australia, with

and

CJD Equipment is launching two new ranges of Shandong Lingong (SDLG) equipment in Australia: a set of mini excavators and the H-Series wheel loaders. CJD has been the national distributor of SDLG machinery in Australia for over a decade.

SDLG is one of China’s fastest growing construction equipment manufacturers, with over 50 years of industry expertise spanning more than 130 countries. As a member of the Volvo Group since 2007, SDLG integrates Volvo’s design influence and high-quality standards to provide machinery that is both costeffective and reliable, with simple operation and maintenance.

“CJD Equipment has been distributing SDLG wheel loaders in Australia for over 11 years and, in that time, our customers have experienced great success with the product in a number of different industries, including waste and recycling, agriculture, timber plants

wheel loaders providing an even wider choice

and general construction,” CJD Equipment SDLG national product manager Andrew Egan says.

“The general feedback is that they are extremely reliable, simple to operate and versatile.”

Mini excavators

The SDLG mini excavator range includes three models: ER616F, ER636F and E660FL. All models, newly designed by SDLG with comfort and reliability at the core, have either zero or reduced tail swing, durable rubber tracks, pilot hydraulic operated controls and either Kubota or Yanmar engines.

“The new models include standard features that are usually options on other machines, making SDLG extremely good value for money,” Egan says.

“Coupled with SDLG’s reputation of simplicity, reliability and ease of operation, SDLG excavators will likely become one of the first choices amongst astute buyers.”

The smallest in the excavator range, the 1.8-tonne, 13 horsepower (10kW) ER616F has an excavation force of 15kN and the ability to accommodate different attachments.

The ER616F features an energysaving, fuel efficient Kubota engine with a zero-tail swing and highquality hydraulic components for precise control and increased machine stability.

Ideal for landscaping and smaller municipal construction jobs, the ER616F is robust, reliable and very simple to operate. With a mechanical accelerator, pilot handle and control switch all ergonomically positioned, the ER616F helps operators get the job done quickly.

The next model is the ER636F 3.8tonne, 27hp (20kW) excavator. The ER636F also has a compact design and zero tail-swing with an enclosed, spacious cabin, making it wellsuited to urban construction jobs, particularly in tight spaces. The cab features a digital instrument

CJD

new mini excavators

H-Series

New SDLG machines are now available from CJD Equipment

The new mini excavators all have a comfortable cab with noise and vibration reduction technology

display, suspension seat and air conditioning as standard for ultimate operator comfort.

The ER636F has a high torque, highly efficient Yanmar engine with a load-sensing hydraulic system for smoother operation and reduced noise and vibration.

For improved durability, the upper frame is reinforced to ensure uniform load distribution with a high ground clearance. Additionally, the undercarriage delivers outstanding wear resistance and the boom and arm use high tensile steel and reinforced castings for a longer service life.

The opening angle of the engine hood allows for unrestricted access to filters and pressure testing ports, and relays and fuses are also located inside the cab to ensure simplified maintenance.

The six-tonne, 52hp (39kW) E660FL excavator is the largest in the line-up to be offered in Australia. Reliable and comfortable, the E660FL excavator has a reduced tail swing, comfortable cab and compact structure, along with industry-leading vibration and noise reduction technologies, ideal for a variety of landscaping and general construction applications.

The E660FL features nine work

modes and an auto-idle function for power on-demand. This is paired with an energy-saving hydraulic system and highly efficient fourcylinder Yanmar T3-rated engine to deliver high performance with notable fuel economy.

The load-sensing hydraulic system is engineered to deliver performance and efficiency with a variable piston pump for precise control in a wide variety of conditions.

Like the ER636F, the E660FL has been designed to minimise maintenance efforts, with the main

components, filter and electrical systems grouped for easy ground level access.

All new SDLG machinery comes with a three-year, 6,000-hour warranty as standard.

H-Series wheel loaders

Expanding CJD Equipment’s SDLG wheel loader offering is the new H-Series range.

The new mini excavator range goes from 1.8 tonnes to six tonnes

SDLG wheel loaders have proven ideal for a variety of applications and are an excellent choice for Australian operations. Having earned a reputation as the workhorse of the construction industry, SDLG wheel loaders are known for their extremely reliable performance, simple operation, low maintenance and value for money.

The new L936HLA, L938H and L946H H-Series models feature a high torque, fuel efficient Weichai sixcylinder engine. The H-Series models are fitted with a newly designed air-conditioned cab with improved sealing performance, suspension seat and a wraparound pillarless front and rear windscreen for clear visibility. All wheel loaders also feature fully certified ROPS-FOPS rollover protection as standard.

“SDLG wheel loaders have all the necessary safety features in the cab, along with an ergonomic, comfortable, low-noise environment – keeping operators alert and happy,” Egan says.

“The new models are very versatile, thanks to the factory fitted quick coupler and third function hydraulics which can accommodate a variety of different attachments, making the machine very simple to use.”

The first new machine in the SDLG H-Series line-up is the 11-tonne, 141hp

(105kW) L936HLA wheel loader. The L936HLA features a bucket capacity up to 1.8 cubic metres and rated load of three tonnes. The rear axle rated load capacity has been improved by 25 per cent, offering greater durability and increased productivity. This loader has a small footprint, making it manoeuvrable, and is perfect for removal jobs and utility work.

The new L938H, also an 11-tonne, 141hp loader, delivers a larger 2.1 cubic metre bucket capacity and includes a four-speed power shift transmission over the two-speed L936HLA, for greater speed and smoother shifting. This makes the L938H wheel loader ideal for transporting and loading loose materials like sand and soil, as well as feedlots and general material handling.

The L936HLA and L938H both also feature an automatic bucket and boom kick out function to ensure optimal productivity during load carrying.

The L946H is the largest wheel loader in the new H-Series range offered by CJD Equipment. Weighing in at 13 tonnes, it has a 173hp (129kW) engine and a four-tonne rated load capacity, 2.3 cubic metre bucket and optimised frame and boom structure, making it ideal for heavy load and material handling applications.

In addition to the new H-Series

models, the compact six-tonne LG918 (77hp/58 kW) and the 17-tonne L958F (217hp/162kW) can still be purchased as new and remain part of CJD’s SDLG wheel loader offering.

Egan says the SDLG and CJD Equipment partnership gives customers a reputable product with high level aftersales support, with 24/7 sales, parts and service support stretching across the nation, from capital cities to country towns.

“It’s one thing to buy a machine that’s cost-effective, but all machines have the potential for unscheduled downtime,” he says.

“It’s a matter of how quickly you can get back to work again and how much you can rely on the company that sold you the machine.

“CJD has a very good reputation Australia-wide for representing its machinery and looking after customers. You don’t stay in the industry for almost 50 years without looking after your customers.

“If you’re planning on purchasing or replacing a piece of used equipment or you just want a machine that is reliable, easy to operate and maintain, and highly efficient, then SDLG is a great option.”

For more info on the SDLG range, locate your local CJD Equipment branch or SDLG dealer online at cjd.com.au or call 1300 139 804.

The L938H is an 11-tonne loader with a 2.1 cubic metre bucket

Hydraulic

Specialised approach

Earthmovers & Excavators caught up with Dakota Contracting Services’ Jake Roehrich recently to ask how the new Lamtrac 6160T mulcher carriers from Colbrook Industries are fitting into his fleet.

“I started off with just one machine, doing forestry mulching, gorse, blackberries and property clean-ups, and built it up into a business,” he says of how Dakota Contracting got going.

“We’ve been going for around five years now and run a set of dedicated mulching machines with a team of five.”

Covering the whole of Victoria, but with a focus on the Macedon Ranges and Hepburn region, Dakota Contracting undertakes a variety of mulching, mowing and land clearance work, from handling storm damage material, to fire prevention, to maintaining council verges.

“We’ve got excavators, dozers, skid steers, dedicated forestry mulchers and remote control mulchers,” Roehrich says of his fleet.

“There’s a fair range there as we use different machines for different applications.

“We use excavators for a lot of our tree clearing and storm damage work, and we run mulchers on the end of those as well. This is for things like drainage lines where other machines can’t get access.

“The remote control machines we send up onto steep embankments and for roadside vegetation where it’s too dangerous to have manned machines working.”

Built for mulching

Taking Dakota Contracting’s mulching work to the next level are a pair of Lamtrac 6160Ts sporting Diamond Mowers mulchers.

The third generation of Lamtrac’s compact track loader-style mulcher carriers, the 6160T have been designed specifically for mulching and offer a superior performance alternative to attaching a mulcher to a skid steer.

“They’ve been really good,” Roehrich says.

“We love the machines, and the boys are in them every day. The Lamtracs have their work cut out for them – they’ve got a fair bit of work to get through and they get pushed pretty hard every day. They’re very

reliable and the production power is impressive.”

With a Cummins B4.5 Stage V engine, the 6160T produces 155 horsepower (116kW) and has a maximum flow rate of 166 litres per minute at 6,000psi. Weighing in at 6.2 tonnes and fitted with a forestry ROPS/FOPS cabin, Colbrook Industries – the sole distributor of Lamtrac machinery in Australia and New Zealand – says that the 6160T offers significantly more power than other compact track loaders on the market.

Initially designed for Lamtrac’s home country of Canada, the Colbrook version sports an upgraded cooling system with a three-tier radiator capable of handling ambient temperatures up to 50 degrees Celsius.

“We wanted something that had more horsepower than your average skid steer,” Roehrich says.

“After we got the first one, we were like – yeah this is the tool, this is what we need.

“A big thing is the safety – for example having side-opening doors instead of front-opening doors. If you stop on a skid steer and your boom’s

Two Lamtrac 6160T mulcher carriers have been hard at work at Victoria’s Dakota Contracting Services – with owner Jake Roehrich saying the dedicated mulching machines make all the difference for his land clearance business

Two Lamtrac 6160T mulcher carriers are now in the Dakota Contracting fleet

YOU DESERVE A SMOOTHER, BETTER BUSINESS WITH CALTEX

At Caltex, we are committed to providing the most advanced premium industrial lubrication technologies available for every kind of operation - from mining to agriculture, power generation to construction, trucking to global marine. No matter what challenges you might face, the journey will be Smoother, Better, Together with Caltex.

Talk to your local distributor or find out more about Caltex fuels and lubricants. www.caltex.com/au/business-solutions

up, you can’t get out of your door –you’re stuck inside the machine.

“The traction is really good. We do a fair bit of work where it’s hilly and it’s going up 45-degree hills. Maintenance is also great as it’s easy to clean. When mulching you get a build-up of debris in the machine because material is flying around all over the place, so that was a game changer. We’ve halved the time spent cleaning the machines – we get it done in an afternoon, whereas a skid steer used to take all day.”

Colbrook Industries

In addition to the Lamtrac mulcher carriers, Dakota Contracting has been running a set of Diamond Mowers vegetation management

attachments, also supplied by Colbrook Industries. These include drum mulchers, disc mulchers and two brush cutters.

Roehrich says that he finds the Diamond brand to be highly efficient, with its capabilities particularly standing out on harder material like trees. The strong backup provided by Colbrook Industries is essential for his work, he adds, along with the parts availability.

“Having the parts and support there has been a big thing for us,” Roehrich says.

“We’ve been buying from Colbrook for about two and a half years and the biggest thing is their service. What I’ve learnt is that it doesn’t matter what machine and what brand you buy, it’s the customer

service you get behind it that matters.

“Colbrook will drop what they’re doing to come and help us get going again. There aren’t many people that will go out of their way and drop you off parts on a weekend to get you going again for Monday. That sort of service is priceless.”

For more info on the Lamtrac 6160T mulcher carrier and Diamond Mowers attachments available from Colbrook Industries, visit: www.colbrookindustries.com.au

The 6160T has been built for mulching, with faster machine cleaning a stand-out

Stability has been excellent, even on steep slopes

LEADER

MINIEXC A VATORS

1.3-6.0 TONNE

A VAILABL

F U LL RANGE AVAILABLE

1.3-6.0 TONNE

MINI E X CAVATORS •

For over thirty years Toyota Huski skid steer loaders have built a reputation on performance, driver comfort and legendary reliability. Toyota Material Handling proudly continue this outstanding pedigree with their range of built tough Huski mini excavators.

Stacked with operator features, the range consists of seven models including a 1.3-tonne short-radius machine and six zero tail swing models ranging from 1.6 to 6 tonne, plus famous Huski performance guaranteed to dig in and be productive on every job.

Talking the torque

The Weitai WTM hydraulic final drive and travel motor ranges are now available from Tilly’s Crawler Parts

Designed to suit 1 .7 to 20-tonne excavators, dozers and crushing and screening machinery, Weitai says its final drives can fit 95 per cent of the most popular tracked machines, on brands like Caterpillar, Komatsu, Case, Kubota, Kobelco, Yanmar, Bobcat, Hyundai and Hitachi.

Final drives transfer power from the drive train to the tracks and increase machine torque in a way that reduces strain on shafts, bearings and gears.

Due to the vast quantity of bolt patterns for final drives utilised in machinery, Weitai has developed a design that can handle multiple bolt configurations to cover a variety of machines. The flexibility of this concept allows Australian distributor Tilly’s to service a wider range of machinery and part needs.

Weitai is one of China’s largest exporters of final drives and travel motors, supplying many original equipment manufacturers (OEMs) with components for excavators, crushers, screens, conveyors and many more types of machine.

Weitai has been building drives for over 30 years and now services customers in 33 countries around the world.

Tilly’s now has Weitai final drives in stock at its Toowoomba HQ, and showcased them at its stand at the Heavy Equipment and Machinery Show, which took place in Brisbane in May.

Tilly’s Crawler Parts salesperson Peter Berg says that the most exciting aspect of the final drive is its ability to fit a wide variety of machines, irrespective of brand.

“We’re giving an option for different machines that is good quality and a lower price,” he says.

“This will get people moving faster than them having to wait for parts to come in from overseas.

To ensure Tilly’s customers are receiving the most effective

The Weitai final drive range is designed to be compatible with a variety of brands

solution, a random selection of Weitai drives have undergone thorough inspection by the Tilly’s team through a disassembly process. The objective of this process was to assess individual internal components of the drives for quality assurance, which the drives passed.

Sales have far exceeded projections and expectations of the Tilly’s sales team. Not only is Tilly’s impressed by the quality of the drives, but also the cost-effective nature of the product.

Customers can expect to save up to 50 per cent off the OEM recommended retail price, as well as a one-year supplier warranty.

“Weitai drives have got a good name and are a good brand,” Berg says.

“Just get in contact with the Tilly’s team and we can answer any questions you have.”

For more information on the Weitai drive range, visit: www.tillys.com.au

The final drives complement Tilly’s range of crawler parts

Top position

With Shell lubricants, oils and grease from Viva Energy Australia you can ensure that your business has the best tools on hand to get more done faster

The world of construction is changing rapidly. On a journey to decarbonise their operations, businesses are quickly adapting to new ways of working. It helps that construction is a sector set to be in high demand during 2023. Many governments have identified the positive impact construction can have on global economies and are ramping up their investments in infrastructure projects.

For example, in the US, Moody’s Investors Service reports construction spending is expected to increase by 5.5 per cent in 2023 with the $1.2 trillion Infrastructure Investment and Jobs Act driving increased demand. Bloomberg reports that China put even more money behind infrastructure projects in 2022, boosting construction with its own $2.3 trillion plan – and the country is set to invest further during 2023, according to China’s state-run Global Times Elsewhere, the energy crisis has inspired governments to invest in long-term alternatives to oil and gas. This is the case in the UK, which plans to accelerate the development of new nuclear, wind, solar and hydrogen power. Similarly, India

faces the need to invest around $840 billion in urban infrastructure over the next 15 years to meet the needs of its rapidly growing population.

All this investment creates a vital opportunity for the construction industry to drive growth – for the businesses themselves and the communities they operate in. From new housing to families to sustainable infrastructure, construction companies can help to build a better economic and environmental future for people everywhere.

Business opportunities

To realise the potential of increased global investments in infrastructure, companies need the ability to take on a range of new projects on top of their current workloads. This means getting themselves set up for success by optimising their processes and maximising equipment uptime.

There are several reasons why these two tasks are important. Across multiple industries, there’s a shortage of skilled workers.

Construction is one of the worst affected, with hundreds of thousands of unfilled vacancies worldwide. So, companies need to

make the most of the skilled teams they have and equip them with the right tools and processes.

Also, with rising material, fuel and labour costs, companies need to find as many efficiency savings as possible to protect their margins.

A vital place to look for these savings is in equipment operations, where breakdowns contribute to missed deadlines and account for roughly 40 per cent of the industry’s cost overruns.

Viva Energy Australia, the Shell Lubricants Macro Distributor in Australia, offers a range of lubricants, oil and greases that can help extend equipment lifespan, prevent breakdowns and provide solutions for effective maintenance plans.

“Shell invests significantly in technical collaboration and has over 350 product application specialists that work closely with original equipment manufacturers and customers to develop innovative lubricant solutions to optimise equipment uptime,” Viva Energy technical expert Silvana Farrugia says.

“Our lubricants products can deliver value but also improve business outcomes.”

Shell Lubricants provide a wide variety of products to optimise equipment uptime

Working as hard as you

As construction companies take on more projects, the reliability of their equipment and processes will be critical in delivering on time and to budget. Shell Lubricants has a wide variety of lubricants, tools, technologies and initiatives available to businesses that they can use to maximise equipment uptime and drive efficiency across site operations. Here are some solutions that companies can explore:

Predictive maintenance and modelling

So much equipment damage can go unnoticed until it’s too late. Unplanned downtime can easily come from previously unnoticed equipment damage. With predictive maintenance practices (including oil condition monitoring), construction crews can spot and fix issues before they escalate – preventing avoidable breakdowns and unplanned downtime. Sensors play a vital role in this, creating a valuable new source of data for companies to generate actionable insights from.

Ineffective lubrication has caused breakdowns for four out of 10 companies

Preventative maintenance

Research conducted by Shell shows ineffective lubrication has caused breakdowns for four out of 10 companies. High-performance lubricants for engines, hydraulics, gears and transmission systems are an essential part of avoiding unplanned downtime and maximising equipment productivity. That’s why regular ongoing maintenance from on-site assessments and services like Shell LubeAnalyst optimise lubrication practices in a way that can make a huge difference to delivering projects on time and on budget. Viva Energy Australia’s local technical helpdesk is also a great resource in providing the best lubricant solutions for your equipment (see below for details).

Artificial Intelligence (AI)

Some predict the use of AI in construction will grow 183 per cent

over the next two years, so how can it help companies improve efficiency?

In the initial stages of a project, it can aid planning to prevent cost overruns and missed deadlines. Out on the site, autonomous equipment can free up workers for more valuable tasks – helping teams to streamline operations and increase productivity while mitigating the issues caused by the labour shortage.

Work with an expert partner

Construction businesses have a huge opportunity ahead of them and collaboration will be crucial in setting them up for success.

Working closely with a partner like Shell Lubricants Macro Distributor Viva Energy can help businesses select the solutions that meet their specific needs and take advantage of the opportunities that increased investment in construction will bring.

For more information about Viva Energy and its lubricant product range for your machinery or equipment visit www.vivaenergy.com. au/shoplubricants. For product information contact the Technical Helpdesk Monday to Friday, 8am to 6pm AEST on 1300 134 205 or email technicalhelpdesk@vivaenergy.com.au. Please visit www.shell.com/ business-customers/lubricants-for-business/perspectives/equipmentlife.html to view information sources used in this article.

Full speed ahead

The dirt is flying at Excavator Parts, with plans for an expansion of its yard underway as well as father and son Peter and Jayden Jilg putting their skills to the test in the high-speed world of 4x4 racing

After Excavator Parts’ brush with the Marvel Universe last year, which saw one of its excavators used in the filming of Shang-Chi and the Legend of the Ten Rings, it seems film is in the blood, with company director Peter Jilg appearing in the short film ‘Terrain Tamer – Dust Up’.

The second in the Fast Parts series filmed by Victorian 4WD parts dealer Terrain Tamer, it focuses on the world of 4WD racing – a particular passion for Peter and his son Jayden.

Outside of the day-to-day of selling new and used excavator parts from their base in Wauchope on NSW’s mid north coast, Peter and Jayden are the driver and navigator for the Jilg Racing team, participating in 4WD and Ultra4 buggy endurance events across Australia.

Since 2019, the pair have taken part in off-roading challenges such as Ultra4 Australia and Cliffhanger – handling everything from winch climbs and creek runs to week-long navigation races in the Cobar desert.

“Dad used to race years and years ago down in Victoria in a few small competitions,” Jayden says of how the business got involved in sponsoring its own racing team.

“Back in 2019 we decided to get

involved because we knew a few guys that did similar events and were keen to get back into it.

“We ended up finding one of the cars that we have from a company down in Victoria that do 4WD parts and, from there, we started the winch challenges and 4WD endurance events.”

This first car was an old Nissan Patrol, which was cut in half and a roll cage built inside. Larger wheels and a host of personal modifications by the Excavator Parts team turned this SUV into a winch track racer.

“We then bought an Ultra4 buggy, which is for more serious off-roading,” Jayden says.

“It’s got 40-inch tyres on and is basically a tube cage with specialised suspension, which means it’s built for more high-speed rock crawling. We pretty much pulled the whole thing down and rebuilt it – added our own touch to it.”

At the time of speaking, the team was preparing for the second round of Ultra4 Australia near Warwick, QLD, with Cliffhanger taking place in October. This year Excavator Parts will be sponsoring Cliffhanger, which calls itself the “big daddy of Australian 4x4 racing”.

“We’ve always had like a passion for 4WD and motorsports,” Jayden says, “so we thought: ‘Why not give it a try, see how we go?’

“It helps us get the business name out there as well.”

It sounds like things are just as fast-paced in the yard, with Jayden saying that the parts business “just keeps getting bigger and bigger”.

“There’s always more demand for it. We’ve got something like 80 or so machines spread throughout the yard. They just keep coming in and we keep pushing them out.

“We’ve actually got two yards at moment, so one where the warehouse is and one over the way that’s getting developed. It should be done at the end of this year/start of next year and is the same size as the yard we currently have, so we’re just trying to fit everything in.”

Best of luck to the Jilg Racing team!

For more info on Excavator Parts, visit the website excavatorparts.com.au. To see Jilg Racing’s 4x4 antics, check out Facebook @JILG Racing and Instagram @jilg_racing.

Father and son team Peter and Jayden Jilg

PRESSEXTRA

With support and expertise from Porter Hire, Plumb Commercial is meeting strict deadlines on a residential housing project near Toowoomba

Plumb position

All the boys love them. It’s pretty hard to even keep the plumbers out of them to do their jobs – they’d rather sit in the machines because they’re air conditioned and have stereos in them!”

Plumb Commercial director Steve Wilkes laughs down the phone when describing how his operators have taken to the Hyundai excavators he currently has at a subdivision site near Toowoomba in Queensland.

Four 32-tonne R320LC-9s, a Hyundai HL757TM-9 wheel loader and a 20-tonne Ammann ARS200 padfoot roller from Porter Hire are currently on site laying services, operated by a team that includes Trevor Jennings – aka ‘Australia’s Best Operator’ – who’s known for his Instagram and TikTok film clips of him operating heavy machinery.

“He loves being in the big stuff,” Wilkes says.

“But we try to get all of our guys to look after the machines – you’ve got to treat them like your own.”

Wilkes’s career began with an apprenticeship at his father’s sheet metal company in Toowoomba, before a move to Brisbane and into plumbing. After a decade, Toowoomba called him back and he was headhunted by Hutchinson Builders, where he spent 15 years running its hydraulic and civil division alongside his current Plumb Commercial partner Andrew.

“We decided to go out and do it for ourselves, so myself and Andrew started Plumb Commercial about three years ago,” Wilkes says.

“When we were doing subdivisions for Hutchinson Builders, Porter Hire came and saw us, and we’ve dealing with them ever since.”

Now, Plumb Commercial has seven subcontractors under its umbrella as well as the Cavalier Homes business bought around 18 months ago.

“We specialise in civil plumbing, but we also cover commercial and residential hydraulics as well, so basically anything with plumbing we can do,” Wilkes says.

“On the Cavalier Homes side, we build residential homes, along with anything up to three storeys high.

“With the plumbing contracts we’ve got two jobs that are about two and a half million dollars, but we’ve worked up to $5 to $10 million jobs.

“We’re probably not always the cheapest, but the quality of our work and the work ethic that we instil in our guys is what sets us apart from everyone else. We make sure that we that everything we do is good quality and we really don’t want to go back to a job, so we make sure that works are done right the first time.”

Highfields subdivision

The project we are looking at today is what will become a new housing estate in the expanding town of Highfields, located 20 minutes north of Toowoomba.

Words Cat Fitzpatrick

Images Lincoln Bertelli

“We’re putting in the civil infrastructure, so the sewers, the stormwater, water, connecting it up to the council mains, and so on,” Wilkes says.

“It’s a 160-lot subdivision, with a detention basin that runs over to a creek at the back.”

On the site, the four Hyundai R320LC-9s are digging the pipe trenches that vary between three and six and a half metres in depth.

“We have them digging the trenches and backfilling, but we’ve also got to use shoring boxes on some of the deeper stuff, so they’re lifting the shoring boxes in and out as well as the piping.” Wilkes says.

The R320LC-9s were chosen specifically for “that extra reach and the extra grunt” with the deeper trenches. Wilkes says the features such as auto boom and

auto power boost are useful features for making operation easier and improving productivity.

The surround-view camera system is also a major benefit on a busy worksite.

“The cameras are great for safety as we’ve probably got eight or nine guys running around on the site, and there’s a fair bit of pressure to get the work done quickly. So, having that that 360-degree camera means that, if somebody walks up behind a machine, the operator can see them and stop what they’re doing. It’s very handy for this site as well, to prevent machines from ending up in trenches.

“If we start getting into more of the subdivision work, we’ll start talking to Porter Hire about GPS as well. This will make the machines more efficient again because then

It

we don’t need to have people in the trenches giving heights, as they can just dig straight off the machine.”

Alongside the excavators, a Hyundai HL757TM-9 wheel loader is moving material around on site – from soil dug from trenches to heavy concrete piping.

“Because we are digging so deep, we’ve got a lot of spoil that we have to move as well as backfilling,” Wilkes says.

“It was a no-brainer to get this machine in. Its capacity makes the process faster, as its bucket can hold a lot more material and therefore backfill a bit quicker than the excavators.

“We’ve also put some forks on it to move pipes around. At the moment, as it can take six months to get concrete pipe in, most developers are buying the pipe before the

The R320LC-9s were chosen for their greater reach and horsepower

was a no-brainer to get this machine in

subdivision’s even approved and just storing it on site. It then becomes an issue when we get to site, especially when you’re covering hectares of ground, to try and move all this pipe around, so that’s where the loader comes in.

“It’s got a wide wheelbase as well, which is what we need, especially with the undulations that we’ve got on site. Especially if you’ve got new guys coming in and trying to learn how to operate them, it’s a lot safer having a wide base.”

Porter Hire

With high praise for the machines comes even higher praise for Porter Hire.

For Plumb Commercial, hiring specific machines in for different jobs makes a lot more sense rather than having a large yard to store a

fleet, and the machines’ maintenance is handled for them.

“Porter Hire delivers the machines to site, they remove them from site and they look after the fleet – the only thing we’ve got to do is operate them and put fuel in,” Wilkes says.

“We have a great relationship. They’ll ring me up just to see how things are going, even if I don’t have anything on hire with them at the moment. When they’re in town, they’ll pop in and just say hello to us and see what’s coming up.”

The Porter Hire team has also been on hand to help the Plumb team out where needed.

“For example, on another one of our jobs, the people we’re doing the work for own the machine, but we needed a rock breaker. Usually that isn’t supplied without a machine, but they look after us. It’s a really healthy and

The service Porter Hire gives us is outstanding

B

C

prospering relationship,” he says.

“The service they give us is outstanding. If a machine breaks down or we have an issue with it, usually they’re there the next day having it fixed or replacing the machine so we can keep moving as we’re on tight deadlines.

“To anybody reading this, I just highly recommend getting in touch with them and their pricing is really competitive.

“Also, if you have downtime due to the weather or other reasons, they’re always happy to help you out and stand a machine down if they can. I wouldn’t go anywhere else – they’re our number one supplier.”

For more details on equipment available for hire through Porter Hire, visit www.porterce.com.au

The Porter Hire team is supporting several other machines on site, including this Hyundai 290LC-9

A 20-tonne Ammann ARS200 padfoot roller has been performing well on site

The HL757TM-9 wheel loader has come in useful for moving heavy concrete pipe around the site

Test of time

McCloskey’s R155 reclaimer screen may have a fresh new look but, underneath, it’s the same durable and versatile machine that’s made it a firm favourite for the past 13 years

In the fast-paced world of heavy machinery, it is rare to find a product that stands the test of time.

However, the McCloskey R155 reclaimer screen has defied expectations and remained a steadfast favourite at 888 Crushing and Screening Equipment (888CSE), and throughout Australia, for over a decade. This remarkable machine has proven its longevity and continues to impress both existing and new operators across endless mobile screening applications.

The recent arrival of the R155 in McCloskey’s new green and grey livery has resulted in a modernlooking machine that still boasts the form and function of the original heavy-duty scalper/reclaimer screen.

Beyond its aesthetics, the R155 has always been built to last. Constructed with robust materials and cuttingedge technology, this screener can withstand the most demanding conditions, ensuring optimal performance for years to come.

One of the remarkable aspects of the R155’s success is its status as one of the first screens sold at 888CSE. Over the years, this machine has garnered a loyal following among 888CSE’s customer base. Its reputation for reliability and efficiency has spread, making it a sought-after choice in the industry.

A recent R155 delivery was made to a repeat client which was still

using its original McCloskey R155 in a demanding recycling application after more than 10 years and over 15,000 hours.

By minimising the need for extensive material pre-handling, this screener streamlines operations and reduces overall costs. Moreover, it ensures clean end products, meeting the stringent requirements of various industries.

The versatility of the R155 is a key factor in its popularity. It has proven its worth in a wide range of applications, including site reclamation, construction and demolition (C&D) waste management and recycling.

It also handles difficult materials such as the sorting of primary crushed rock, rip-rap and various sands, aggregates, ores and minerals. Regardless of the challenge, the McCloskey R155 rises to the occasion.

As part of the esteemed McCloskey R Series screener range, which includes the R230 for very large operations, the R155 high energy screener offers unparalleled flexibility.

Available in several deck configurations, such as punch plates, bofar bars, finger tines, standard mesh and piano wires, this machine can adapt to the specific needs of each project. The R155 is a tough and reliable screening tool, designed to handle the heaviest of applications with ease.

If you’re in the market for a highquality screening solution, look no further. 888CSE currently has the McCloskey R155 in stock, ready to meet your project’s demands. This machine combines durability, versatility and efficiency – making it an ideal choice for any operation.

After 13 years of exceptional service, the McCloskey R155 has solidified its place as a reliable and effective screening solution. Its sleek and modern design, coupled with its ability to handle challenging materials, has earned the respect and admiration of operators worldwide. Whether it’s site reclamation, construction and demolition waste management, or any other demanding application, the R155 continues to prove itself as a powerhouse in the industry. Trust in its capabilities and let the McCloskey R155 elevate your screening operations to new heights.

For more information about the R155 reclaimer screen, visit 888SCE at www.888cse.com.au

The McCloskey R155 reclaimer screen is now available in a new green and grey livery

The R155 is robust enough to stand up to the toughest applications

DOZER SPECIALISTS

CATERPILLAR307.5 2022,excavator.7.5ton,quickhitch, thumbgrab,bucket.Readytowork!.S1020. TA1146312. $119,900PlusGST

CATERPILLARD5K2XL 2018,with4,500hours.6way blade,gradecontrol,slopeassist,newsweeps,screens andMSrippertobefitted.ThisD5K2willbesoldclean, detailedandservicedwithourcomprehensiveworkshop report.233. TA1166133. $234,900PlusGST

KOMATSUD39EX-24 2021,1,200hrs,6wayblade,95HP, MSripper,suitnewbuyer.ThisD39EX-24willbesold clean,detailedandservicedwithourcomprehensive workshopreport.267. TA1174108. $249,900PlusGST

CATERPILLARD6TLGP 2014,LGPwith6,500hours. Straighttiltblade,rearscreen,Trimble3DGCS900grade control.ThisD6TLGPwillbesoldclean,detailedand servicedwithourcomprehensiveworkshopreport.Sold withwinch for $395,900plusGSTor$405,900plusGST withnewMSripper.221. $405,900PlusGST

CATERPILLAR12M3 2015,graderwith6,950hours.14ft blade,pushblockandMSripper.17.5tyres.This12M3 graderwillbesoldclean,detailedandservicedwithour comprehensiveworkshopreport.239. TA1166139. $319,900PlusGST

JOHNDEERE450K 1400hrs,6wayblade,sweeps, screensandMSrippertobefitted.S1063. TA1163359. $229,900plusGST

CATERPILLARD5GXL 2004,with7,300hours.6way blade,sweeps,screens,MSripper,stickrake,newpads. ThisD5GXLwillbesoldclean,detailedandservicedwith ourcomprehensiveworkshopreport.S1084. TA1166950. $174,900PlusGST

CATERPILLAR12M3 2016,Graderwith4,950hours.14ft blade,joysticksteering,Autoshift,Lightpackage,sold withMSripperandpushblock.This12M3Graderwillbe soldclean,detailedandservicedwithourcomprehensive workshopreport.S1013. TA1139678. $319,900PlusGST

CATERPILLAR140HVHP 2004,withonly6,550hours.14ft blade,soldwithpushblockandMSripper,17.5Tyers. This140HGraderwillbesoldclean,detailedandserviced withourcomprehensiveworkshopreport.225. TA1161366. $263,890PlusGST

KOMATSUD61EX 2018,5,800hrs,6wayblade,MSripper, TopConwired.S1067. TA1163362. $309,900plusGST

KOMATSUD65EX-17 2013,3,200hours.Sigmatiltblade, MSripper,sweeps,screens,TopConwired,Interimtier4, NONadblue.ThisD65EX-17willbesoldclean,detailed andservicedwithourcomprehensiveworkshopreport. 202. TA1152843. $380,490PlusGST

CATERPILLARD6TXL 2012,7900hours,SUtiltblade, sweeps,rearscreen&MSripper.S1085. TA1167018. $314,900plusGST

Best on show

The 2023 Heavy Equipment and Machinery Show took place at the Brisbane Showgrounds in May and attracted over 5,500 attendees for the four-day event

The Heavy Equipment and Machinery Show saw a wide range of exhibitors from different industries showing off their gear and tech. We were on site to see what was on display.

CJD Equipment – SDLG L958F wheel loader

CJD Equipment was out in force in BrisVegas with a whole suite of Volvo machinery on site, but with the cover story of this issue focused on the expansion of CJD Equipment’s SDLG wheel loader range, what attracted our attention was the hefty 17.5-tonne L958F wheel loader on display.

“This is a very popular loader due to its size and price point,” a CJD Equipment sales rep on the stand told Earthmovers & Excavators

“It’s perfect for quarry work and for loading up trucks. A lot of these units are moved overseas so we’re just trying to mimic that in Australia.

“This one we have here has a quick hitch on it so it’s very easy to move between attachments and you can retrofit boom suspension to these. These really can be fitted out to suit a wide range of applications – it’s a good all-rounder.”

Hiab – Moffett E Series E5 NX electric forklift

Hiab had an extensive range of scissor lifts and truck loading cranes on display, but the star was a brand new electric truck-mounted forklift that can unload both sides of a truck from the same position.

“The one side offload, which is a unique feature of Moffett, allows you to unload both sides of the truck, when you’ve only got access to one side of the truck,” HIAB national product manager Moffett + Multilift Steve Lelan says.

“Normally, with a conventional forklift, you can only pick up on one

side, so if you’re in a tight location you might have to move and repark the truck. You don’t need to do that with this particular Moffett because, due to its ability to pick up 2.5 tonnes on the near side and two tonnes on the far side, it provides both near side and far side access.”

The E5 NX has been designed for use in last-mile logistics and operations such as building material transport and storage units, providing noise and emission-free operation in inner-city settings where access may be limited.

Hastings Deering – 299D3XE compact track loader

What immediately caught the eye on Hastings Deering’s stand was the bright pink Cat 299D3XE compact track loader. This particular loader was given the striking paint job last year as part of a fundraising initiative for Chicks in Pink, which raises awareness of breast cancer. It’s now been out and about on a variety of sites, bringing a bit more power at 110hp (87kW) Hastings Deering says, for use in civil construction and forestry applications.

CR Kennedy – Leica iCR80 and AP20 AutoPole

Australia’s distributor of Leica Geosystems equipment, CR Kennedy, was displaying the new Leica iCR80 construction total station and the Leica AP20 AutoPole, which are designed to minimise errors and automate workflow.

“The AutoPole does numerous things, one being automatic tilt recognition, so you no longer have to keep the pole steady to be able to shoot a point,” CR Kennedy machine control sales and support rep Josh Milliron says.

“You also have height recognition, so as soon as you move the pole up, it’ll automatically update the pole height into the tablet. This means that you can’t mark things out at the wrong height. It’s very fast, running on dual Wi-Fi and Bluetooth to make

The L958F wheel loader is a good all-rounder

The Moffett E Series E5 NX electric forklift (left) appeared on the stand next to the original M5 NX model

setting out 30 per cent quicker than if you weren’t using an auto tool.

“This station will run on a grader or digger as well so that you can actually use it for millimetre accuracy on an excavator or grader for trimming roads.”

Tilly’s – Weitai final drive

Tilly’s had a larger stall this year with a wide range of attachments and parts on display.

An exciting new addition to the Tilly’s stable is the Weitai final drive range, which we go into on page 18. There was also a range of stick rakes for D3–D8 dozers and wheel loaders, rippers and undercarriage parts for machines between 2 tonnes and 60 tonnes.

Although best known for its undercarriage parts, we hear that Tilly’s is also starting to expand into offering low-hour secondhand machines.

Komatsu – excavator Retrofit Kit

Komatsu had one of its PC138US excavators on site to showcase its retrofit kit, which can turn older excavators into smart machines.

The kit equips an excavator with 3D machine guidance, where location data is used to show the operator where the bucket edge is in relation to design data of the construction area.

The process also works in reverse through the collection of 3D construction data so digital designs can be updated to match actual conditions on a site. A payload meter is also included in the kit.

EV Charging Australia –charging stations

EV Charging Australia may be a name that you haven’t come across before, but with the growing interest in electric machinery,

there needs to be a charging infrastructure system to go with it.

Having started up in 2020 with the focus of providing mobile EV charging services, EV Charging Australia has expanded to offer a range of solutions that can charge cars, trucks and machinery, with modular options for companies expanding their fleets and the option of storing excess energy from solar power generation.

Along wide accessories, charging cables, Tesla rental and charging stations it also offers a variety of subscription services for mobile charging and commercial installation.

EV Charging Australia can also manage payment software for quick charging and it has partnered with brokers to provide options for EV financing.

This striking pink 299D3XE loader

Tilly’s had a full suite of excavator parts and attachments on show

This PC138US was showcasing Komatsu’s Retrofit Kit

EV Charging Australia was displaying its range of charging solutions

The Leica iCR80 and AP20 AutoPole

Brisbane Mini Excavator Sales

Future at your fingertips

Continental hydraulic hoses and fittings are built for the harshest environments. From construction, oil and gas, mining and manufacturing to transportation, Continental’s designers and engineers constantly develop new innovations to meet their changing needs.

One example is the Continental crimper controller, which is a 21stcentury improvement over manual crimping. Precise digital crimping and cloud solutions are a quantum leap in the world of hydraulic and industrial hose.

The PC200i is a high-volume, high-capacity stationary crimper featuring the Continental CrimpIQ Controller, powered by Continental Fluid Solutions technology. This technology provides direct access to all crimping specs and information.

It supports a user-friendly interface to guide new and advanced users through the crimping process quickly and easily. Crimp settings, dwell time, pre-start positions and auto/manual operations are all easily set with electronic controls.

The PC200i standard package includes: a 10-inch colour capacitive touchscreen; foot switch; 99mm QCT; manual back stop; PC200 Rack; protective master die foam pads; an adapter die set; an adapter die removal tool; a spare set of die

studs and QCT pins; a Continental Bluetooth digital calliper; and a mini grease gun with CrimpX die lubricant grease tube.

With the full MyCrimp crimp specification app integration, users can easily import and store up-to-date crimp specifications.

The MyCrimp application provides users with up-to-date specifications to properly crimp Continental hydraulic hose and fittings. Users can search by hose style, coupling style, hose size and crimper. The application contains all the information required to properly set up and crimp the desired hose and fitting.

This means operators don’t have to hunt through manuals to find the right specs. To crimp a fitting onto a hose, the operator just uses the touchscreen interface. Presets can be saved, tech support accessed and data backed up to the Cloud, all through the touchscreen.

Combining CrimpIQ crimpers with CrimpCloud greatly increases the efficiency of an operation, delivers real-time traceability and improving the quality and safety of every crimp. CrimpCloud provides improved equipment maintenance, support, integrated e-resources, reports and equipment utilisation data. Owners can monitor production data and create certificates for every hose assembly for full traceability.

Machine performance can also be tracked, ensuring crimp quality and eliminating errors.

In another new release from Continental, operators can now create a hydraulic and industrial hose crimp shop wherever they are with Continental’s Shop In A Box. This turnkey set up contains a hose saw, crimper and all the accessories you need to produce premium Continental assemblies.

Continental fittings are constructed from a single piece of steel without brazed or welded joints to provide ultimate protection against leaks and potential leak paths. With fulllength crimps and a low-profile design that will last longer, the interlocking Bite-to-Wire technology delivers maximum coupling retention for safer assembly and reliability under the toughest pressure — no internal or external skive required.

For more information on Continental’s hose solutions, visit: www.continental-industry.com and to learn more about CrimpCloud, visit: CrimpCloud.com

Above left: The PC200i crimper comes with the CrimpIQ Controller for easy access to crimp settings.

Above right: With Crimp in a Box, owners can set up their own Continental hose crimping shop, whatever their location

Continental’s CrimpIQ Controller makes crimping hoses as simple as pressing a button

MINING

Hitachi haul

Mining company Rex Minerals has announced that it has entered into an agreement with Hitachi for new Ultra-class mining equipment worth over $100 million

This will include four excavator units ranging in size from 250 tonnes to 600 tonnes and 12 300-tonne capacity haul trucks. Hitachi will also provide South Australian-based facilities and aftersales support as Rex Minerals continues to develop the Hillside Copper-Gold Project on Yorke Peninsula, South Australia.

“This strategy of locking in the fleet via an LOI [Letter of Intent] secures the Ultra-class fleet for Rex without any immediate financial commitment and ensures that we can push forward with and adhere to our project timeline,” Rex CEO Richard Laufmann says.

“We are excited to be working with Hitachi after completing an exhaustive examination of our potential mining fleet options. As detailed in this announcement, the activity levels for all disciplines in relation to Hillside are increasing and the process remains focused on first production by Q4 calendar year 2025.”

Rex Minerals says that Hillside will provide employment for over 500 people during construction and over 400 during operations.

AUTONOMOUS

Mining innovation

Komatsu and Toyota to develop autonomous light vehicle

Komatsu Ltd and Toyota Motor Corporation have announced a joint project to develop an autonomous light vehicle (ALV) that will run on Komatsu’s autonomous haulage system (AHS) to boost safety and productivity improvements in mines.

Haulage trucks using an AHS are already in use at mine sites, but when they share roads with manual light vehicles like those used for maintenance or transport, they may decrease their speed or stop when passing, to avoid possible collisions caused by human error.

In an effort to avoid this and improve productivity, Komatsu will develop a new management program for ALVs on its autonomous haulage supervisory system and Toyota will develop ALVs running automatically under AHS control.

Both companies are currently testing a concept autonomous light vehicle at their proving grounds and plan to have a proof of concept at a customer site by January 2024.

“Since 2008, we’ve have rolled out 650 driverless trucks at 22 mine sites around the world,” Komatsu Australia executive general

A proof of concept will be developed for testing by January 2024

manager mining Leo Kaloglou says.

“Our AHS has a proven track record in delivering enhanced productivity and lower operating costs, with safety as the highest priority.”

Komatsu Australia managing director Sean Taylor says Komatsu and Toyota have a long strategic global relationship and this project is another example of this collaboration delivering value to joint customers.

“Komatsu and Toyota are also collaborating on hydrogen fuel cell technologies to be featured on medium-sized hydraulic excavators, which will support our journey towards a 50 per cent reduction in CO2 emissions by 2030 and net zero by 2050,” Taylor says.

“Komatsu’s vision is to empower a sustainable future where people, businesses and planet thrive together and we are accelerating our efforts to realise smart and clean future mine sites, leading to higher safety and productivity for our customer and partners.”

The new fleet will be put to work at Rex Minerals’ new Hillside mine

THE D-LOCK TILT COUPLER

COMPLIANCY IS PARAMOUNT

All Doherty couplers are compliant with Australian standard AS13031:2023, WC01783 NSW Workcover position paper, European standard EN474, International ISO 13031, and all major contractor policies.

¬ DPL+ safety system locks front and rear pin in event of loss of engagement force

¬ Wide pin centre pick-up range

Powerdig Digging Bucket

¬ Reduced tip radius and 100% bucket fill factor proving maximum breakout

¬ Tapered sides minimising ground resistance

D-Lock Tilt Mini | Pull-Pin

¬ Simple pull-pin design with maximum pin contact to eliminate wear

¬ Compact in design, powerful, and virtually maintenance free

¬ Incorporates a precision-built actuator with only two moving parts, ensuring trouble-free operation

¬ Up to 180° of tilt

¬ Simplified connections and controls

¬ DPL+ safety system locks both front and rear pins in the event of loss of engagement forces

To see the full range of Doherty attachments, contact the Doherty team.

¬ Motor only has two moving parts and can run up to 210 BAR (3000PSI)

D-Lock Tilt Mini | Hydraulic

¬ All D-Lock Tilt Mini Couplers can run on pilot pressure, reducing fit-up cost

¬ Locking cylinder hoses are fully protected with internal routing

Rotary Tilt Bucket

¬ No cylinders, pins, bushes or grease nipples - only two moving parts

¬ Doherty Power Actuator ensures precise control with no unwanted movement

Powerdig Mud Bucket

¬ Minimal bucket to product contact when digging, substantially increasing bucket life

¬ Minimal wear and maximum life

D-Lock Coupler

Upto 100°oftilt

DOZER

Top cat

Tigercat has released the 612 grapple skidder in the US – the second variation to be built on the 612 platform after the release of the European-focused 612 dual winch skidder earlier this year.

Key design aspects include an oscillating centre section and the optional blade tongs. The oscillating centre section narrows the stance of the machine, allowing easier navigation through tight stands. The optional blade tongs offer additional versatility for decking wood and other secondary duties.

The 612 is equipped with the Tigercat FPT N67 Stage V engine, delivering 155kW (208hp). The operator’s cab is spacious with clear sightlines. The heavy-duty air ride suspension seat is climate controlled and fully adjustable.

Turnaround provides increased comfort and easy entry and exit from either side of the machine. The operator has full control of all machine functions in any position within the 220° range.

As yet there isn’t a release date for the 612 grapple in Australia. For a range of available Tigercat skidders and other forestry equipment, visit Onetrak’s website at www.onetrak. com.au/forestry.

Cool crawler

Dressta’s releases TD-15M crawler dozer

With a frame and undercarriage designed to handle tough work sites, the TD-15M’s hydraulics have been given a higher level of protection and the blade and ripper strengthened. To safeguard the engine from dust and debris the TD-15M has a hydraulically driven, variable speed fan.

“A dozer is only as strong as its weakest point,” Dressta global sales director Bartosz Kozik says.

“At Dressta, we don’t do weakness. Our strength is in building worldclass machines which deliver for the operator and the owner.”

With 33 per cent larger glass surface area, a tapered engine hood, optional rear-view camera and additional blade lighting, the TD-15M continues Dressta’s commitment to safety and visibility.

“Visibility is one of our core design considerations,” Dressta executive director of industrial design Gary Major.

“Across our range, which includes the new TD-16N, the absolute benchmark for visibility, we have taken a proactive approach to maximising visibility for the operator. Our priority is to make our dozers safer and more productive and great visibility is key to both.”

Operator comfort has also been improved with an ergonomic control interface, improved seating and joystick and an ultra-low noise, low vibration cab.

Powered by a Cummins engine, delivering 1,044Nm torque @ 1,500 rpm, the TD-15M generates 472kN of drawbar pull. Two-speed steering drive maximises productivity by delivering 100 per cent of the engine’s power to both tracks. Selectable drive and attachment modes improve the operational experience and performance, while load sensing hydraulics and electro-hydraulically controlled proportional joysticks allow accurate and sensitive control.

“Power and control go hand-in-hand,” Kozik says.

“We’ve given the operator the tools to enjoy many happy hours of profitable dozing. In addition, with its modular layout with safe and easy access to maintenance points, lifetime lubricated rollers, heavy-duty chains and idlers for extended track life, we’ve made significant steps to increase overall uptime and performance.”

Production of the TD-15M has now begun at Dressta’s new fullyautomated dozer production facility in Changzhou.

TD-15M crawler dozer

Tigercat’s new 612 grapple skidder

The new Tigercat 612 is designed to excel in harvesting applications

Komatsu has developed a concept machine for a medium-sized hydraulic excavator that combines a hydrogen fuel cell and Komatsu-developed key components, to achieve carbon neutrality on construction worksites.

By advancing the proof of concept tests it started in May 2023, Komatsu will accelerate its efforts to embark on the commercial production of mediumsized and large construction equipment powered by hydrogen fuel cells in the near future.

In its mid-term management plan, Komatsu committed to minimising environmental impact through its business, targeting a 50 per cent reduction in CO2 emissions from use of its products and production of its equipment by 2030 (compared to 2010 levels) and set a challenge target of achieving carbon neutrality by 2050.

Currently manufacturing hybrid hydraulic excavators and electric mini excavators, Komatsu is also engaged in research and development to provide products equipped with new power sources.

For the new concept machine, Komatsu adopted a Toyota-developed hydrogen fuel cell system and hydrogen tank.

Komatsu says that medium-sized and large construction equipment requires a power source with higher energy density than that of small construction equipment. As hydrogen has a higher energy density and can be refuelled in a shorter time than recharging batteries, Komatsu has been advancing its R&D efforts in hydrogen for medium-sized and large models.

HAULERS

Heavy haul

Three Rokbak RA40s are handling difficult conditions with ease at Indonesian nickel mine

On an island on the edge of the Pacific Ocean, 2,000km north-east of Java, a trio of Rokbak RA40s are working across a 45,065-hectare mining site. At this remote location in North Maluku, Indonesia, the Rokbak articulated haulers operate up and down steep inclines, through mud, dirt, grit and gravel, for close to 24 hours a day, in 30°C heat and in sometimes torrential rain.

Moving around 450 tonnes of biomass and quarry materials each day over a 2km area, each RA40 will record approximately 6,000 operating hours per year.

Indonesian heavy industry company PT Hillcon purchased the three haulers through Rokbak dealer PT Uniquip, an equipment supplier based in Jakarta, and they have been operating at the mine since February 2022.

Daily operations for each RA40 begin at 7am and conclude at 6:45am the following day, across a two-shift driver pattern. These long hours benefit from the truck’s

high-performance fluid transmission providing 6,000 hours of operating time before requiring an oil change, meaning increased productivity and uptime as well as low cost per tonne.

“This particular site is extremely challenging, with high levels of mud, uneven ground and precarious terrain that gets even worse when the notorious Indonesian wet season rolls around,” Rokbak regional business manager Lee Irving says.

However, Rokbak says that difficult conditions are where the RA40 excels, with the 38-tonne hauler designed to make light work of large-scale quarry, mine and construction jobs.

“With long shift patterns, we’ve been able to see first-hand the RA40’s performance and productivity in Weda Bay, with the truck’s heavy-duty axles coping extremely well against slippage and the subsidence you often find on site,” Uniquip sales manager Rachmad Sembiring says.

Hillcon’s operators like the visibility and comfort that the RA40 provides

A PT Hillcon RA40 and site operators at the mine in Weda Bay, North Maluku, Indonesia

Concept machine for a mediumsized hydraulic excavator equipped with a hydrogen fuel cell

Komatsu reveals hydrogen concept machine

2021 SANY SY55C PRO 37668

XE55DA

The Trimble X9 includes automatic instrument calibration and greater sensitivity

LASER SCANNER

Next level

Trimble has announced the release of its X9 3D laser scanning system for surveying, construction and engineering

The X9 includes Trimble X-Drive technology for automatic instrument calibration, survey-grade self-leveling and laser pointer for georeferencing. The model is an expansion of the Trimble X7 – delivering longer range, higher accuracy, shorter scan times and a higher level of sensitivity, improving scan results and productivity. With more efficient reality capture capabilities, the X9 broadens potential applications for customers in surveying, building construction, oil and gas, rail, forensics, monitoring, tunnelling, mining and others.

By capturing more accurate data, the X9 provides significant time savings. The auto-calibration eliminates the need for annual calibration, which lowers the cost of ownership and reduces downtime. The X9 also includes survey-grade self-leveling with the industry’s widest compensation range for fast, easy setup.

Trimble X9 data can be delivered directly from Trimble Perspective or FieldLink software to Trimble’s office software, including Trimble Realworks 3D scanning software, Trimble Business Center office software, SketchUp and Tekla, or exported to industry-standard formats to produce application-specific deliverables. The Trimble ecosystem provides the software and flexibility to work the way scanning professionals want, so they can deliver what their customers need.

“Our customers buy Trimble because they want reliability and performance,” Trimble Geospatial market manager for reality capture solutions Jason Hayes says.

“The Trimble X9 is simple to use, provides unsurpassed reliability, and excels at creating high-quality digital representations of the world for applications ranging from fast-paced building documentation to challenging outdoor surveys.”

BATTERY

Juice boost

New Sandvik battery boosts battery electric vehicle runtime by 36 per cent

Sandvik is introducing a highercapacity battery for its battery electric mining loaders and trucks that significantly boosts the vehicles’ run time on a single charge.

In addition to a 36 per cent longer runtime, there is also a lower cost per Amp-hour compared to currentgeneration Artisan battery packs. The increased capacity also improves charge acceptance, enabling faster downhill speeds and better efficiency.

“This new battery represents 13 years of technology evolution for Artisan battery packs,” Sandvik Mining and Rock Solutions product line manager, batteries and chargers Joseph Beck says.

“By utilising the latest generation of larger LFP battery cells, we’ve optimised energy density to enable our largest BEV loaders and trucks to operate 36 per cent longer between battery swaps. Our simulations show that customers will be able to eliminate one swap every shift in some applications.”

Purpose-built for underground mining and designed and manufactured in-house by Sandvik, the new battery maintains the modularity and ruggedness of the existing pack and features significant design improvements.

A revamped housing and increased rigidity enhance structural strength,

enabling the battery to better withstand shock and vibration. Laser-welded terminals provide a stronger connection with lower resistance, reducing energy loss and heat while improving efficiency and safety. Top and bottom cooling plates improve cooling performance to slow cell degradation and extend life. Key design improvements also include better ingress protection against dust and moisture.

The next-generation LFP battery cells are fully encapsulated in a non-conductive potting material, increasing thermal conductivity and reducing the risk of overheating and short circuit. Sandvik has also redesigned its battery management system for improved reliability and function. This safety feature monitors every cell’s temperature and voltage to ensure everything is within operational range.

Sandvik says the battery can be retrofitted into Z40, Z50, LH518B and TH550B units currently operating in the field. It is expected to be commercially available from Q4 2023 and equipped as standard on all new Sandvik BEV loader and truck orders.

Sandvik is expanding electric vehicle run times with a new battery

+ 5 Year Structural Warranty

+ Designed in Australia for Australia

+ Full range of mobile Impact Crushers, Jaw Crushers, Cone Crushers, Scalpers, Screens & Conveyors

+ National dealer support, Service & Spare Parts

Authorised dealer for Striker

Green light

Rio Tinto US Borax is the first open pit mine to switch all of its heavy machinery to renewable diesel

Rio Tinto’s Boron, California operation is the first open pit mine in the world to complete its move to renewable diesel. The Boron site produces a million tonnes of borates every year, for use in fertiliser and building materials. An initial trial of switching fossil diesel to renewable diesel in a US Borax haul truck was conducted through 2022 in partnership with Neste and Rolls-Royce, using Neste MY Renewable Diesel.

Made from materials such as used cooking oil and animal fat waste, the use of Neste MY Renewable Diesel can reduce greenhouse gas emissions by up to 75 per cent over the life cycle of the fuel compared to fossil diesel, Neste says.

Rio Tinto has now fully transitioned its heavy machinery fleet onsite to renewable diesel, even using it in blasting.

Rio Tinto says this is a key step towards achieving its commitment to reach net zero emissions by 2050.

“We are proud that our US Borax operations have become the first open pit mine to operate a fleet running entirely on renewable diesel,” Rio Tinto Minerals chief executive Sinead Kaufman says.

Next phase

The Snowy 2.0 pumped-hydro mega project has seen a second tunnel excavation completed at Lobs Hole in the Snowy Mountains

The 2.93-kilometre emergency, cable and ventilation tunnel (ECVT) has been excavated and fully lined with 13,140 locally-manufactured concrete segments by tunnel boring machine (TBM) Kirsten.

Snowy Hydro CEO Dennis Barnes says Snowy 2.0 was continuing to make solid progress, with around six kilometres of tunnelling by TBMs completed and drill and blast excavation of the power station cavern about to start.

“We are extremely pleased the ECVT excavation has been completed and the whole project team is excited to be moving into the next critical phase of construction. Our huge power station cavern will be located about 800 metres underground and will be one of the largest and deepest in the world.

“We are also using drill and blast methods to construct cross passages linking the ECVT with the MAT [main access tunnel].

“Meanwhile TBM Kirsten, which is setting a global standard in TBM technology, is being modified to carry out another very specific task – to excavate the inclined pressure

shaft and line it with speciallydesigned and locally manufactured concrete segments.

“The shaft is 1.45km long and excavating a segment lined tunnel of this length at a very steep 47 per cent incline using an 11-metre diameter TBM is without precedent internationally.”

Modifications to Kirsten include altering the levels of the TBM’s tanks and mechanical equipment so they remain horizontal when travelling up the incline, and converting the walkways into steps and ladderways. Also being installed is a screw conveyor to extract excavated rock from the cutterhead to a sandwich conveyor system with face-to-face rubber belts that help constrain the crushed rock so that it can be transported down the steep slope without spillage.

Additional plant and equipment will be installed in the ECVT tunnel to support the excavation activities, including an overhead crane, a conveyor transfer station, monorail manrider for personnel access and rack and pinion mechanism for plant access to the TBM.

Snowy 2.0 will significantly expand hydro electricity generation

Rio Tinto’s Boron mine in California

The excavation of the incline requires novel modifications to the TBM

WORLD CLASS MACHINERY FROM AN AUSTRALIAN-OWNED COMPANY

With autonomous mowers, landscape contractors can reduce the number of employees required to complete general mowing tasks.

LEARN MORE AND REGISTER YOUR INTEREST

50° SLOPE CAPABILITY

RC ROBOTIC SLOPE MOWERS

• Reduce your labour requirements and cost

• Manage fewer employees and the management of them

• Grow your business with less labour

• Let your high-value talent do high-value work

SKID-LIFT

FOR SKID STEER AND TRACTOR

The ultimate in accessibility, efficiency and safety when it comes to slope mowing.

• Hillside & steep-incline maintenance

• Golf course rough maintenance

• Solar farm mowing

• Dam & levy embankments

• Wet or swampy terrain

• Roadside mowing

Pairing the advantages of a scissor lift with the accessibility, flexibility and stability of a skid steer. SKID-LIFT™ is revolutionising the way industry undertakes its aerial works, increasing safety and productivity.

MORE WORLD-CLASS COLBROOK PRODUCTS

ALSO COMPATIBLE WITH

• Skid Steer/CTL

• Tractors

• Telehandlers

• Wheeled Loaders

• Fork Lifts

75-77 Westgate Drive, Altona North, VIC 3025

P (03) 8369 6610

E info@colbrookindustries.com.au

colbrookindustries.com.au

FIND OUT MORE Full specs, features, videos, photos and more.

Long leave EMPLOYMENT

The Construction Industry Portable Paid Long Service Leave Act 1985 was introduced to allow construction workers to carry long service leave benefits from employer to employer.

The Construction Industry Long Service Leave Payments Board, trading as MyLeave, is a statutory authority established to carry out the administration of the Act on behalf of eligible employees in the construction industry in Western Australia.

The primary purpose of the Act is to “make provision for paid long service leave to employees engaged in the construction industry and for incidental and other purposes”.

After 36 years since its introduction, the review will assess whether the Act remains fit-for-purpose.

Stakeholder consultation and submissions for the review will be sought shortly, and stakeholders with an interest in the construction industry will be given the opportunity to participate.

“The Construction Industry Portable Paid Long Service Leave Act is nearly four decades old and, in that time, has provided significant benefit to workers and employers in the construction industry,” WA Industrial Relations Minister Bill Johnston says.

“The time has come to consider opportunities for improvements to this Act to ensure it keeps pace with the evolution of the industrial relations environment and how it affects the construction industry.”

REMUNERATION

Hays flags expected salary increases

According to a survey, 90 per cent of Australia’s construction businesses are planning to increase salaries this year

Recruitment company Hays has released its Salary Guide for the 2023–24 financial year where it surveyed over 14,000 employers and professionals across the Australian construction industry.

The results show that 62 per cent of employers plan to increase salaries above 3 per cent.

“We’re calling this the year of the raise, where the promise of higher salaries reflects the intensity of the skills shortage in today’s jobs market,” Hays senior regional director of Hays Simon Bristow.

“This year, both the number and value of increases will rise, continuing the upwards trajectory we first noted in last year’s Hays Salary Guide.

“Despite the increased salary boost, employer and employee expectations in the construction industry still fail to align. Many construction professionals feel undervalued and underpaid. They feel their current salary doesn’t reflect their individual performance.”

According to Hays, there are four key factors motivating employers to increase salaries in their next review: competition amid a growing skills gap crisis; the ripple effect of

falling real wages, the impact of pay transparency; and ‘the great ask’ where more employees are prepared to ask for higher wages.

“Many employers find that the pipeline of skilled construction professionals doesn’t meet their needs,” Bristow says.

“As candidate supply continues to tighten, employers face increased pressure to proactively attract and retain talented employees.

“Employees still feel they have bargaining power and are more confident to negotiate for better pay.”

Other key findings of the report are that 48 per cent of construction employers are planning to increase their permanent headcount over the next 12 months, while just 49 per cent of construction professionals plan to remain with their current employer. The rising cost of living is cited as a reason for this, along with uncompetitive salaries and poor management styles or workplace culture.

Benefits outside of salary are also playing a significant role, with top benefits being training, a company car, a car allowance, onsite parking and career progression opportunities.

Many construction employees will see salary gains

WA reviews construction industry long service leave Act

APPRENTICES

Helping hand

Free car rego for Victorian apprentices

Victorian apprentices will be able to get free vehicle registration from July 1, saving them up to $865 every year.

The $10 million initiative is being delivered in the Victorian Budget 2023/24 to ease financial pressure for trainees and apprentices across the state.

Apprentices who need their car for work are already entitled to a 50 per cent discount on their vehicle’s registration fee as part of the Trade Apprentice Registration Discount scheme – with over 12,000 apprentices and trainees currently taking advantage of the discount.

The scheme was introduced in 2016 to reduce costs for trade apprentices needing to use their own vehicle for work purposes, and expanded to border communities earlier in the year – giving apprentices who live in Victoria but work in New South Wales and South Australia the same savings as those who live and work in Victoria.

Eligible apprentices can apply for the free vehicle registration via the myVicRoads portal on the VicRoads website.

“We’re backing our hard-working Victorian apprentices and helping ease cost of living pressures by making vehicle registration completely free, saving eligible apprentices hundreds of dollars every year,” Premier Daniel Andrews says.

Member for Broadmeadows Kathleen Matthews-Ward adds: “Carpenters, joiners, bricklayers, plumbers, electricians and chefs in our outer suburbs rely on their vehicle to get to and from work every day – so this initiative will provide a huge benefit.”

APPRENTICES

Grant announcement

Apprentices facing financial or personal hardship will be supported to undertake their trade and study through a $2.25 million NSW government scholarship program

Applications are now open until July 21 for the 2023 Bert Evans Apprentice Scholarships program that will support 150 people with $15,000 each to complete their training and further their career.

The scholarships support apprentices who are experiencing financial or personal hardship, demonstrate a high aptitude for vocational education and training and are committed to their on and off the job training in metropolitan and regional NSW.

These scholarships greatly assist first year apprentices to undertake their trade and study to achieve their career goals.

“With demand for vocational education high, this year we have increased the number of Bert Evans scholarships on offer to help more apprentices through their training,” Minister for Skills, TAFE and Tertiary Education Tim Crakanthorp says.

“Whether you need to purchase new tools, cover fuel or car

The number of scholarships on offer has been expanded to 150

maintenance costs, or pay for additional training courses, these scholarships have helped people overcome personal barriers to finish their apprenticeships and go onto rewarding careers.

“Apprenticeships are vital in ensuring NSW has a pipeline of skilled workers, and we want to give our apprentices a helping hand to complete their training, so they can make a strong contribution in their jobs and in the lives of their families and communities.”

Free rego for apprentices will kick in next month

REGULATION

Act action

NSW to establish Building Commission to strengthen the quality of building and construction in the state

With the need for significant levels of new housing, the NSW government says the new Building Commission will provide house buyers with greater confidence in the quality of building work.

David Chandler was appointed as Building Commissioner two and half years ago, after cracks were found in Sydney’s Opal and Mascot Towers apartment buildings.

The government will also this year introduce to parliament its new Building Act, which will consolidate and modernise many pieces of legislation.

The government says its aim is to provide clarity to consumers and the sector about their rights and responsibilities and to incentivise the building sector to deliver quality homes.

“I’ve made clear we need more supply, there’s no two ways about it,” NSW Premier Chris Minns says.

“The pressure on the rental market is severe, and the government’s job is to get more supply into the system to help alleviate some of that pressure.

“But I want to provide confidence to the public that when we build, we’ll build properly.

“We want well-built, well-designed suburbs with top-tier buildings and top-tier builders.

“The Building Commissioner David Chandler has done a remarkable job cleaning up the construction industry. We want to expand on that and ensure can get supply moving while still maintaining public confidence in the quality.”

The Building Commission is expected to be established by the end of the year.

MINING

Fresh start

Mining to begin at Mount Carbine tungsten project

Full scale mining will begin soon at EQ Resources’ Mt Carbine tungsten project, about 130km northwest of Cairns.

Tungsten, also known as wolfram, is a critical mineral used in aerospace, construction and technology such as smartphones, solar panels, wind turbines and EV batteries.

Mt Carbine is currently Australia’s only primary tungsten producer, producing about 350 tonnes of concentrate a year from existing tailings and low-grade stockpiles.

Once open cut mining begins, production is expected to ramp up to between 60 to 90 tonnes a month.

The mine is located within Queensland’s North East Minerals Province and is a site for tungsten, molybdenum and tin.

“This is an important step forward for both Queensland’s growing critical minerals sector, and our renewable energy transition,” Queensland Resources Minister Scott Stewart says.

“Demand for critical minerals such as tungsten is increasing exponentially as the world moves towards decarbonisation.

“The transformation of this mine reflects one of the key themes of our Queensland Resources Industry Development Plan, which

is to provide new life for old mines.

“Importantly, this mine will provide up to 135 good, secure jobs for Far North Queenslanders, which will also mean economic benefits for the entire region.

“Together our Resources Industry Development Plan will work hand in glove with the Energy and Jobs Plan to help get these minerals out of the ground to build the solar panels, wind farms, electric vehicles and batteries we need for the future.”

EQ Resources CEO Kevin MacNeill adds: “Mt Carbine is already a major jobs provider in the region and will grow further in coming months as production ramps up.

“The open cut mine will provide a five-fold increase in grade quality which will allow us to become a global leader in tungsten supply.

“Our plan is for the Mt Carbine mining leases and surrounding exploration tenements to become a top three tungsten producer outside of China.

“We are also looking to make a major contribution to economic development in the Cairns hinterland including upgrading services and providing employment opportunities in a region hit hard by COVID-19 lockdowns.”

The Building Commission will bring greater oversight to the NSW building and construction sector

Tungsten has widespread use in tech such as smartphones and EV batteries

ATACAT773D/F/G 2019build.Hoistraisetankforeasier access/truckmaintenance,444,000litres,interiorprotective coatingforoptimumprotection,extensivegridlocktank bafflingcreatingstabilitywithoutlosingcapacity,underbody stonechipprotectioncoating,lowprofile/lowcentreofgravity S231.

HYUNDAIR800LC-9 2017,tidyunit,workingdaily,compete withheavydutyrockbucketcomes,MEboomandarm(Short), hammerpiping,Lincolnhydraulicautogreaser,OPGguard,AC ROPScabin,handrails,E-stops,GME-UHFradio.Locatedin

$150,000PlusGST

CATERPILLAR140HVHPSERIES2 2006,verytidySeries2 unitwithextensiveservicehistory,completewithACROPS cabin,14ftblade,RMR,17.5R25tyres,wiredfortopcon.Can inspectworking,locatedWesternQLD.Pleasecallfordetails. S230. TA1176700.

JOHNDEERE770G 2013,immaculatelowhourmachine, completewithACROPScabin,steeringwheelandconventional

$195,000PlusGST

KOMATSUD475A-3 1999,tidylocal860HP,100Tmachine, 12,000indicatedhours,completewithACROPScabin,SU blade,dualTilt,4BBLsinglegiantripperwithpinpuller,OEM undercarriageatestimated70%liferemaining,800mmwide grousers,servicehistoryavailable.MachineislocatedinSE QLDandcanbeinspectedworking.Pricejustreduced.S212. TA1133395.

$295,000PlusGST

CHOPPERROLLER 12Tchopperrollerplus,4Tofballast,16T totaloperatingweight,drum3.66mWide,1.8Mdiameter,total width4.12m,5.2mlong.LocatedinParkes,NSW.S226. TA1159158. Priceis$70,000PlusGST$70,000

construction events

Here are upcoming construction events for 2023. Information was current as of going to press

AIMEX – Sydney

The Asia-Pacific’s International Mining Exhibition (AIMEX) is an internationally renowned platform which showcases the latest mining technology, equipment and services, offering a unique opportunity for leading suppliers and buyers to conduct business face-to-face, learn about the latest trends and network in an interactive forum.

WHEN: September 5–7, 2023

MORE INFO: www.aimex.com.au/en-gb.html

Concrete 2023 – Perth

Under the theme ‘Resilient and Sustainable Concrete: Breaking Down Barriers’ the Conference will cover all aspects of concrete materials, design, construction, repair, and maintenance that are relevant to our changing world.

WHEN: September 10–13, 2023

MORE INFO: ciaconference.com.au

No-Dig Down Under – Brisbane

No-Dig Down Under is the southern hemisphere’s only large scale conference and exhibition dedicated to trenchless technology. Organised in partnership with the Australasian Society for Trenchless Technology (ASTT), a range of training courses on trenchless methods will be presented prior to the conference. These will be presented by industry leaders from Australia and overseas and will be of value to anyone who encounters trenchless technologies as part of their employment.

WHEN: September 12–14, 2023

MORE INFO: www.nodigdownunder.com

Henty Field Days – Henty

Located in the heart of the nation’s food bowl in southern NSW, Henty Machinery Field Days is an agribusiness supermarket attracting more than 60,000 visitors each year.

WHEN: September 19–21, 2023

MORE INFO: hmfd.com.au

Inside Construction Expo –Melbourne

Inside Construction Expo will bring the major projects and civil infrastructure construction industry together across two massive days in Melbourne. With a focus on Victoria’s Big Build, Inside Construction Expo is an integrated event featuring a world-class exhibition, eading educational conference program and industry awards.

WHEN: September 20–21, 2023

MORE INFO: www.insideconstructionexpo.com.au

Workplace Health and Safety Show –Sydney

The Workplace Health and Safety Show will feature a program of events including live demonstrations, seminars, interactive forums and round table discussions on health, wellbeing, manual handling, major hazards, innovation, technology advancements, new safety products, injury prevention and height safety, amongst other topics.

WHEN: September 20–21, 2023

MORE INFO: www.whsshow.com.au

Elmore Machinery Field Days –Elmore

Begun in 1964, Elmore Machinery Field Days is one of Australia’s key agricultural field days, held at Elmore Event Centre in Victoria. A large number of exhibitors cover earthmoving machinery, GPS and guidance equipment, laser and levelling equipment, IT and lifting machinery, among other categories.

WHEN: October 3–5, 2023

MORE INFO: www.elmorefielddays.com.au

Victorian Major Projects Conference –Melbourne

Covering transport, housing, health, education, energy & water the Victorian Major Projects Conference is set to delve into the significant infrastructure projects that are supporting growth and driving the state’s postpandemic economic recovery.

WHEN: October 10–11, 2023

MORE INFO: www.expotradeglobal.com/events/ vicmajorprojects

National Roads & Traffic Expo –Sydney

The National Roads & Traffic Expo focuses on civil construction, traffic management, road maintenance, operations and asset management of roads, bridges, tunnels across Australia.

WHEN: October 11–12, 2023

MORE INFO: www.terrapinn.com/exhibition/roadtraffic-expo/index.stm

WA Mining Conference – Perth

The WA Mining Conference will focus on the best practices, technologies and strategies advancing mining in Western Australia to help attendees increase production, lower costs and prepare for a sustainable future. WA Mining Conference will address the most important issues shaping mining in WA.

WHEN: October 11-12, 2023

MORE INFO: www.waminingexpo.com.au

Tigercat

Mulcher. Tigercat (FPT) C13 engine 569 HP. Tigercat 4061 Mulching head (3.0m drum width). POA

Caterpillar 4.4T Tier 3–96kw Engine. Capacity up to 450T/ Hour. POA

Dressta TD20M Dozer. Cummins QSC8.3, Tier 3 engine 179kW (240 fwhp). Semi-U, Rippers, 3 Shanks POA.

QSC8.3,

Hidromek HMK410LC 41ton. H4-Series, DA Hydraulics, Quick Hitch Piping & HD bucket. POA

Hidromek HMK230LC 23ton. H4-Series, DA Piping Kit, Quick Hitch Piping & GP Bucket. POA

Hidromek HMK145LCSR 16.8ton. H4-Series, DA Piping Kit, Quick Hitch Piping, Rotating Hyd circuit & dozer blade. POA

Striker CQ400 Cone Crusher. Caterpillar C13 Tier III 328kw Diesel Engine, Remote Control, Capacity up to 400T/Hour. POA

Hidromek HMK210W-H4 25ton. H4-Series. ISUZU AI-4HK1X Tier 3A engine. 0.9 m3 bucket. Dual 11,0020 (16pr) tyres. POA

Terex Fuchs MHL331F Material Handler. DEUTZ TCD 4.1 L4 EDG 4-cylinder-turbo-diesel engine. 12m reach. POA

Hidromek HMK310LC 31ton. H4-Series, DA Hydraulics, Quick Hitch Piping & HD bucket. POA

Anaconda SR520-2 Finishing Screen.

M760B

Dressta TD15MLT Dozer. Cummins

Tier 3 engine 142kW (190 fwhp). Semi-U, Rippers, 3 Shanks. POA

Anaconda TD516R Trommel Screen. Tier 3 - JCB 444 DieselMAX – 63kw Engine. Capacity up to 150 T/Hour. POA

Anaconda DF514 Scalping Screen. Tier 3 - JCB 444 DieselMAX – 85kw Engine. Capacity up to 375 T/Hour. POA

Hidromek HMK102B Supra 9.5ton. 1.1m3 6:1 bucket, roll over forks, extending backhoe arm. Fully optioned high-spec backhoe. POA

Terex Fuchs MHL350F Material Handler. DEUTZ TCD 2013 L06 2V Engine. 15m reach. POA

Striker HQR1112 Impact Crusher. Caterpillar C9 265kw Tier 3 Diesel Engine. Remote Control. Capacity up to 350 T/Hour. POA

One of the codes being reviewed pertains to moving plant on worksites

HEALTH AND SAFETY Best practice

SafeWork NSW is conducting a large-scale review of workplace health and safety codes of practice – the largest it will have completed in decades

SafeWork NSW has announced that 20 codes of practice are being reviewed to make them relevant to today’s workplaces.

Amongst the codes being reviewed is the Code of Practice for Moving Plant on Construction Sites, which first came into use in January 2004. The code encapsulates consultation and risk management, risks associated with moving plant on construction sites and other additional risks that need to be considered for achieving safe workplaces.

Other codes being prioritised by the NSW government include codes pertaining to work near overhead power lines, tunnels under construction and safety in forest harvesting operations.

A code of practice does not explicitly equate to, nor replace, work health and safety laws, but can be used to facilitate an easier understanding of what is required to be compliant within those work health and safety laws.

This review is being undertaken following a statutory review of the Work Health and Safety Act, which found that all pre-existing codes of practice should be reviewed in order to make sure health and safety practices are modernising at the same rate as technological developments and new work practices.

Climate positive

AECOM and the Infrastructure Sustainability Council have provided recommendations around how to build sustainability into preparation for the Olympic and Paralympic games

AECOM and the Infrastructure Sustainability Council have released a paper on how the Olympics and Paralympic Games can provide an opportunity to revolutionise the built environment and set a new sustainable paradigm for how infrastructure is designed, built, operated and maintained. With a focus on climate positivity, resilience and nature-based solutions, AECOM and the Infrastructure Sustainability Council have made a series of recommendations for the industry ahead of the Games, including:

• explore innovative renewable energy solutions, such as onsite renewable generation, alternative fuel sources, purchase power agreements and offset purchases;

• create a standardised framework to measure carbon emissions, not just based on cost, but also efficiency, whole-of-life outcomes and effectiveness of solutions;

• collaborate across local, state and federal governments to develop an integrated approach to climate modelling, measuring resilience and understanding risk;

• define resilience early and establish its scope, while considering shocks and stresses beyond those associated with climate change and extreme weather events;

• consider opportunities to position nature and the natural environment in a way that celebrates Australia’s natural

heritage prominently within the Games infrastructure, precincts and beyond;

• integrate First Nations knowledge and practice into standards, guidance and practice and bring together the wisdom and knowledge of Country to inform current and future practice for industry; and

• explore and promote communitycentred decision-making to support efforts to deliver a meaningful and lasting legacy.

“At AECOM, we are committed to leaving a positive, lasting impact on people and our planet through our Sustainable Legacies strategy”, AECOM chief executive for Australia and New Zealand Richard Barrett says.

“Brisbane 2032’s publicly stated commitment to deliver a climate positive Games will require a significant shift in how the industry approaches infrastructure development, embracing sustainable practices and innovative technologies to reduce carbon emissions, mitigate climate risks and create a lasting legacy.”

A full copy of the paper can be found at: www.iscouncil.org/ beyond-climate-positive

AECOM and the Infrastructure Sustainability Council say the Olympic and Paralympic Games offer the opportunity to approach the built environment in a more sustainable way

CATERPILLARR2900 ReconditionedTorqueConverter& updriveAssembly.Exchange.1738976.

CATERPILLAR12M/120M/140M/160M Reconditionedexchangegrader transmission.2538405.

CATERPILLARC-16 Rebuiltexchangetruckengine(7CZ), dynotested600Hp,2050ft/lb.*core chargeapplies.2444606.

CATERPILLAR980H Transmission,Reco,ExchangeOnly. *Corechargeapplies 2306311.

CATERPILLARC27ACERT(JNW) ExchangeenginesuitAD55B.*Core chargeapplies.2930853.

CATERPILLARCP76

2009,2100mmPadFootRoller,ForwardOperating Lights,E-Stop,Isolator..C7L001##. TA1181022. $122,000+GST

2007,37,000Litres,FOPS&FOPSA/CCabin,Great

CATERPILLAR651B

Approx35,000LTank.EnclosedA/CCab,3xRearBatter Sprays,2xTopFillPoints.WC17. TA1165552.

2006,newcompactorfeettobefitted. Servicedandpainted. Goodworkingcondition.CP06. TA1123054. $298,000+GST

TRANSTANK67,000L

2005,BulkDieselStorageTank.61,000LSafeFill, SmartFillSystem,2xHighFlowHoses,1xLVBowser. ExcellentWorkingCondition.Priceincludescranageto loadontotransport.FT02. TA1096398. $88,000+GST

CATERPILLAR633EII(3AVAILABLE) ScraperBowls,Unused,LastEverBuilt. $50,000+GSTeachor3for$115,000+GST. YIF86,87,88. TA1076078. $50,000+GST

w.LapSashBelts,ElectricAutoPassengerDoor. SVYIF12. TA1155824. $63,000+GST

CATERPILLAR16H 1997,ExcellentWorkingCondition,PushBlock,Ripper, UHFRadio,FlashingLight..6ZJ003##. TA1000295. $188,000+GST

CATERPILLAR740

WorkingCondition.WC01. TA1043566. $208,000+GST

CATERPILLAR836H

NISSANPATROLDX

2013,ARBBullBar,DrivingLights,TowBar,Trailer Brakes,bUteTrayw.StorageBoxes,WorkLights, FlashingLight,DualBatteries,UHFRadio.SV47. TA1126725. $27,182+GST

WorkingCondition.EX03. TA964855.

WorkingCondition.EX04.

SellingasPackage$48,750+GSTEach

$134,000+GST

KOMATSUHD785-3 1990,100TonDumpTruck.Call/EmailforMultiple BuyingPackages.RD29. TA1176511. $100,000+GST

CATERPILLAR777C 1995,CabChassis,GoodWorkingCondition,Full ComponentHistoryAvailable.WC12. TA1076526. $78,000+GST

HITACHIEX1800-3 2001,Twin6CylinderTurbochargedCumminsEngine. GoodWorkingCondition.EX06. TA1071933. $240,000+GST

KOMATSUPC300-7EO 2010,QuickHitch,FireSuppression,Handrails,Good

KOMATSUHD785-3

1989,100TonDumpTruck.Call/EmailforMultiple BuyingPackages.RD27. TA1176506. $100,000+GST

KOMATSUHD-465-5(2AVAILABLE) Dumptrucks,onecomplete,oneforparts.RD22/23. TA964865.

CONCRETE

Milestone marked

World’s largest pour of cement-free concrete takes place in London

The UK’s National Grid and its contractor Hochtief-Murphy Joint Venture (HMJV) have completed the world’s largest ever continuous pour of Earth Friendly Concrete at London’s Power Tunnels project.

736,000 litres of cement-free concrete were poured to fill the base of the 55m-deep tunnel drive shaft at National Grid’s Hurst Substation in South London.

The cement-free solution, developed by Wagners, uses a binder of ground granulated blast furnace slag and a fly ash geopolymer concrete system chemically activated by the use of industrial waste products instead of cement. The concrete reduces carbon by around 64 per cent, saving an estimated 111kg of CO2 per cubic metre poured.

“We are always looking for new ways to innovate and to now be using this carbon saving cement-free alternative to conventional concrete at scale and on site is exciting,” National Grid project director Onur Aydemir says.

“This world record-breaking pour also offers the opportunity to evaluate the technology ahead of future possible rollout across our network in England and Wales, demonstrating our ambition to achieve net zero construction across all our projects by 2025/26.”

EXCAVATORS

Upgraded design

HD Hyundai Construction Equipment Europe has launched the HW65A wheeled excavator and HX65A crawler excavator

The two new excavators from Hyundai replace the R55-9A and R55W-9A models, with a revised design and new technologies.

The operating weight has been increased to 6.0–6.5 tonnes, depending on specification, and both machines are now powered by Hyundai’s own Stage V diesel engine. This 2.4-litre motor delivers a maximum power rating of 48.5kW, with 248Nm of torque, and it drives a Bosch-Rexroth open centre hydraulic system, with Parker main control valves and an Eaton swing motor.

The hydraulic system is equipped with proportional joysticks as standard, with a ram lock switch mounted on the left-hand lever head. Double-acting breaker piping is also standard equipment and rotation piping is available as an option from the factory. The excavators feature an improved swing motor, offering increased operating speed and torque, boosting productivity in digging and loading operations.

The new cab design delivers improved space for the operator, with increased visibility and a fully adjustable and heatable operator seat. A revised air conditioning system provides optimised airflow within the cab and there are lower noise levels inside and externally. Bringing technology from larger Hyundai excavators, the compact machines now feature a 7 inch touchscreen monitor. This can be used to set auxiliary hydraulic flows for attachments.

Cabin working lights have been improved and there is now the option of full falling object guards at the front and top of the cabin, to provide additional protection on demolition and other hazardous operating sites. Rear and side view cameras provide improved visibility all around the machines.

Significant carbon savings were made through using the cement alternative

Hyundai launches the HW65A and HX65A models

Fair work

Master Builders Australia has aired its concerns that independent contractors may lose out if proposed fair work legislation changes go ahead

The federal government is considering changes to fair work legislation to close what is says a loophole in the difference between the rights and protections afforded to employees compared to independent contractors.

However, there are concerns that independent contractors who run their own businesses will be caught up in these legislative changes.

The government is looking to set minimum standards for workers in what it calls ‘employee-like’ work, including the gig economy, with a consultation paper released in April. The consultation paper describes independent contractors, like selfemployed tradies, as falling into this group of those undertaking ‘employee-like’ work but who do not have access to the same level of rights as employees.

The government also expresses concerns around the amount of bargaining power contractors can have; expressing an aim to achieve a level playing field for all industry participants.

With the emergence of the gig economy, where workers are generally engaged as independent contractors rather than employees, the government says that it is looking to address concerns around these workers being paid below minimum wage as well as suffering from a lack of access to other employee rights.

Master Builders has released its submission to the consultation paper, saying that “the federal government is proposing to force independent contractors to give up their business to become an employee” and urging it to restrict its scope to gig workers.

“The proposed ‘employeelike’ policy goes beyond the Government’s purported original scope of supporting gig workers and leaves the door open to swallow industries across the economy,” Master Builders Australia CEO Denita Wawn says.

“This includes well-established forms of work, including independent contractors and self-employed tradies.

“The building and construction industry is made up of around 440,000 businesses, with over 264,000 of them being independent contractors, representing one in five workers.

“For decades, the industry has attracted individuals who choose to go out and be their own boss and have the freedom to choose the hours they work, the projects they work on, who they work for and negotiate their own fees and conditions.

“If the policy is implemented as foreshadowed in this paper, it will fundamentally upend and damage the entire building and construction industry, which is

founded on a model of specialist contract work arising from the way in which building work is performed.

“The dynamic nature and array of specialist contractors required on a project mean it is simply not feasible for businesses to have to permanently employ independent contractors, and critically, it takes away the rights of independent contractors to run their own business.

“The ‘employee-like’ measure represents one of the most significant and real attacks on the rights of self-employed and independent contractors.

“The proposed changes pose a serious threat, introducing uncertainty, commercial risk, and negative consequences for the community, consumers and an industry already grappling with disruptions, economic uncertainty and high inflation.

“Master Builders Australia strongly urges the federal government to explicitly exclude the building and construction industry from their employee-like industrial law changes to protect the sector’s integrity and the rights of independent contractors.”

Master Builders warns that independent contractors may suffer under ‘employee-like’ work laws

MOROOKAMS-45RUBBERTRACKED crawlerloader,rubber trackedMorookaMS-45,fittedwithIsuzudiesel,fullhydrostatic drivewithcounterrotatingtracks,weighs2.5ton,1.8mwide,strong

REXSOILSTABILISERGRINDERHDS-PULVI SoilStabiliser Grinder,RexmodelHDS-PULVI,fittedwithcabwithcertifiedROPS frame,Detroitengine,hydrostaticdrive,drumhasbulletteethand cuts1.2mwide,has1200litrewaterorlimetankwithhydraulic pumptosprays.Runswell..S438. TA1174276. $38,000+GST

MITSUBISHIBD2G BulldozerMitsibishiBD-2G,fitted with6waydozerblade,3speedfullpowershift transmission,Komatsudiesel,canopyweighs4ton.. Verygoodcondition,onlyworked1200hours..S439. TA1180954.

PACIFICV24-D RollerPadfootTagalong,weightis13.5ton, vibrationispoweredbyDeutzaircooled6cylinderengine,very goodfeetandscraperbars,drumdiameter1750highby2200wide. Massivecompactioncapability.NeedapproximatelyCatD6size machinetopull.Runswell.S428. TA1153112. $24,000+GST

OKADATS850 Pulveriser,Okada,modelTS850,hasreobarcutter, manual360degreerotation,opens850mmwide,headhas100 bosses,pinnedto80mm,375betweenearsand520pincentres.Will suit20-30tonexcavator.Goodorderhadlittleuse..A418. TA1114949. $14,000+GST

KESSLERDRIVEAXLESTEERABLE heavyduty, Kessler,hydraulicdrive,steerable,planetaryreduction, tiltrams,fittedwith1800x25tyres,verygoodorder,2 available.A400. TA1096872. $7,500+GST

CATERPILLAR305E-2CR 2017,excavator,zeroswing,5ton capacity,nearnewrubbertracks,fittedwithbackfillbladeand 450mmbucket.Goodlatemodeldigger.S431. TA1159439.

CATERPILLAR305SRRUBBERTRACKS 2007,excavator,offset boom,backfillblade,rubbertracks,fittedwithmudbucket,has

CATERPILLAR305SR 2007,excavator,offsetboom,backfillblade, 600diggingbucket,steeltracksbuthavepadstosuit,hascrane scaleandhook,weighs5ton.Worked6000hours,runswell.S436. TA1173402. $29,500+GST

SYMTECMKW-35SM concretepump,willpumpupto35cubic metresperhour,weightis2.5ton,150mmdiameteroutlet,hasown watertankandmixinghopper,needsapprox.80kvagensettorun, unitbeeninstorageonlyworked21hours.S405. TA1113598. $29,000each+GST

CASE480-E fittedwith4in1bucketwithnewedge,ROPScabin, poweredbyCummins4cylinderengine,powershiftforwardand reverse,6,000hours.Goodloader.S429. TA1154757. $24,000+GST

PALSONIC7B7B 1999,piledriver,99yearofmanuafacture,weight 1550kg,2wayvibratingoscillation for drivingorremovingpiles,suit craneor20tonexcavator,longcontrolhoses,suitsheetpilesorany piledrivingwork.S435. TA1141428. $19,000+GST

BERTITRINCARNINI2000 Mulcher,cuts2mwide,hasverticallift for treepruning,sideshiftswingtocutbesidetractor,heavy swingingcutters,willcutheavyscrub,willsuitfrom85to155hp tractor.A408. TA1109739.

EXEQMODEL04 2022,Pulveriser,brandnew,modelEXEQ04,suit from5-10tonexcavator,pickupsizebosses75mm,pinnedto 60mm,centres303mm,ears230mm,opens380mmwide,hasreo barcutter,brandnew..A446. TA1170080. $10,000+GST

$8,000+GST

strongsheetpiler,hasforwardreversecontrolincab,willsuit20-30 toncarrier,weight1.4ton,comeswithcarryframe,goodpiler.A424. TA1121485. $34,500+GST

DIGGAPD22 augeranddrive,DiggaPD22,suitupto25ton excavator,hasnew450heavydutyauger,headsuitsCat312,65

MANIPULATORMP1 Grapplemanipulator,setup for pickingand placementoflargeconcreteorsandstoneblocks,suit30-40ton

KOBELCOSK3003PARTDEMOLITIONBOOM suitKobelcoSK300

TAG40-50TON bucketstosuit40to50tonexcavators,suitHitachi

BBBWOODSHEAR Treeorlogshear,builtbyBetterBuiltBuckets, suit30-40tonexcavator,100mmpinsat600centreswith420-480 $20,000+GST

JEC1800 pulveriser,suitable for concreteorrock,headhas90 bossespinnedto80mm,distancebetweenears330to410,reobar cutter.Crusherwillcrushmaterialdownto40mmminus,weighs1.8

SKESKE-60 pulveriser for concreteorrock,suit20-25ton

DIGGABR410 bobcatsweeper,modelBR-410,sweeps1.6mwide,

NPKG-18 concreteorrockpulveriser,fittedwithreobarcutter,ram guard,has100bossespinnedto80with370betweenearsat530 pincentres.Weightis2ton,suit25-30tonexcavator.Wellbuilt pulveriseringoodorder.A315. TA988264. $18,500+GST

TUTHILLT1850 vacuumblowerunit,400 cfm capacity,fullyself contained,Kubota4cylinderdieselpowered,hasMurphyengine protection,skidmounted,workedonly34hours.S396. TA1092720. $15,500+GST

EXEQMODEL06 pulveriser,brandnew,suitfrom12-16ton excavator,pickupsize,bosses90mm,pinnedto65mm,ears

EXEQ08 pulveriser,brandnew,suitfrom18-25tonexcavator,pick upsizebosses110mm,pinnedto80mm,centres450mm,ears 365mm,opensto870mm,hasreobarcutter,brandnew.A448. TA1170082.

Bucketsuit80tonKomatsuPC800-6,2.2mwide, reversableteeth,pinsare130and110,earsare560-630,andpin centresare660.Weightofbucketis5.7ton,hasheavyduty guardingallaround.Buckethashadlittleuse.A436.

TOKU14E Rockbreaker,suit20tonexcavator,headhas80pins, 480pincentreswith330betweenears.Runswell.A376. TA1078792.

DIGGAPD40 Augeranddrive,suitupto40tonexcavator,has 900mmheavydutyrockauger,100pins,580cent,430between

BOBCATCONCRETEMIXERBUCKEET Bobcatmountedconcrete mixerbucket,brandnew,1,350wide,hashydraulicactuated150 diameterconcretereleaseshute,onethirdcubicmetrecapacity, brandnew.A444.

MARUZENBEDBORERB8 bedborerexcavatormounted,Maruzen, suit5-12tonexcavator,hastwosetsofaugers,one200mmdiathe other300mmdia.Therea10augersofeachsize,hascontroller for remoteoperation,extrapinsandbushes for differentexcavator

KOMATSUPC400-450 Bucket,ripperbucketsuitKomatsuPC400or PC450excavator,bucketis1250wide,has100pins,600centres with370-445betweenears.Verygoodbucket.A415.

ALLUDNS 2011,screeningbucket,Allu,modelDNS-3-12,has3 rotors,weighs1.6ton,hasheadplatewith100pins,580centres with425betweenears,Willsuitmachinefrom20-30ton.Bucketin verygoodorder.A439. TA1161460. $22,000+GST

JEC120 CrusherGrinderBucket,hasheadplatetosuit20-25ton excavator,80pins,470centreswith350-410betweenears.Crushes downto40mm,bucketweightis2ton,buckethashadlittleuse. A441. TA1154755.

JEC2T concreteprocessorcrusher,hasmanualrotatinghead,reo barcutter,opensto800wide,headplatehas80pins,centresare 500,distancebetweenears320to340.Unitweighs2ton.A341.

4TEFCP3061 2021,platecompactorvibrating,brandnew900wide, headhas80pins,460centresand335betweenears.Weightis1060 kg,newcompactorplatereadytogo.A426. TA1121488.

CLAMSHELLROTATINGST-45 grappleorclamshell bucket,withMono360degreehydraulicrotator,has80 bosseswith60pinsand490pincentreswith305ears, hasremovablesides for pickinguplogs,Japanesebuilt. A254. TA811779. $8,000+GST

$21,000+GST

$25,000+GST

CATERPILLAR12-40TON Bucketshugerange,suit12-40ton excavators,includingmudbuckets,screeningbucket,GPbuckets allpricedtogo.Exampleprice for 20ton2mwidemudbucket.

TA1035074. $18,000+GST

JAWSPC800-6

TA1141853.

TA1113779.

$9,000+GST

WRECKING LIST

x ZX230 1 x ZX250H-3 2 x ZX270LC-3

x ZX35U-3F

x ZX330

x ZX330-3

x ZX330LC-3

x ZX350H-3

HYUNDAI 1 x R140LCD-7

x R160LC-7

IHI

x IHI30

x IHI30J

x IHI30JX

x IHI45J

x IHI55UJ

KATO 1 x HD1023

KOBELCO

SE210LC-2

TAKEUCHI 1 x TB138FR

VOLVO 1 x EC240BLC 1 x EC240CL

DOOSAN DX225 HITACHI ZX225USR CASE 9010B

KOMATSU PC228UU KOBELCO SK135SR CATERPILLAR 323DL CATERPILLAR 336D HITACHI ZX135US-3

KATO HD1023 HITACHI ZX200-3 KOMATSU PC220-3 HITACHI EX270-1 SAMSUNG SE130LC-2 SAMSUNG SE210LC-2 SUMITOMO SH350-5

2x DAEWOO S330LC-V

View Products

5 YEAR / 5000 HR WARRANTY ON ALL SUNWARD MINI EXCAVATORS

SWL2820 $50,000+GST Kubota engine, hi flow, ac cabin 4-1 bucket

Track Skid Steer SWTL4538 $82,000+GST HI-Flow, AC Cabin, 75HP Kubota engine, Rexroth pump, 4-1 Bucket

FULL RANGE 1.8-50Ton EDT Hydraulic breakers

SUNWARD SWE18UF - 1.8 Tonne Yanmar 3TNV80F, 17.9hp, hydraulic pilot traveling control. $30,990+GST

SUNWARD SWE90UF - 8.9 Tonne Yanmar 4TNV98 engine, 61.9hp, small tail swing, complete auxiliary equipment, multiple electro-hydraulic control modes, $98,000+GST

SUNWARD SWE25UF - 2.6 Tonne Yanmar 3TNV80F, 18.7hp, Electro-hydraulic propor-tional lever controls the flow (opt). SPECIAL DEALS call for more info.

SUNWARD SWE35UF - 3.8 Tonne Kubota D1703 24.8hp, zero tail swing, multi-funct aux tools. $55,990+GST

SUNWARD SWE60UF - 6 Tonne Kubota V2607 48.9hp turbo, zero-tail swing, aux pipeline. $76,990+GST

TRICON8048STACKEDMULCHHOPPER

Trackconveyors,inboth20mand24mmodels/1200mmwidebelt,CatC2.2engine, 12monthwarranty.S656. TA1142855. POA

TEREXMDSM518R

2021,Trommel,Catengine,self-removingdrum,4wheeldrive,excellent forgreenwaste&soilapplications.S658. TA1142858. $350,000

TRICONPHOENIXTRACKMOUNTEDPUGMILL 2023,NEWMODEL|TrackMountedPugmill|CatC4.4engine|300TPH. ThePhoenixPugmillenablesuserstoproducetheirownmaterialfor roadpavementsincludingcementtreatedandorlimestabilised pavementmaterials,wherevertheyare.S601. TA1058830.

$399,000PlusGST

TEREXMDSM413

Heavydutytrommel,100mm/300mmdrumsectionswithdromcleaner, perfectforheavyorstickymaterialapplications.S657. TA1142856. POA

PORTAFILLMR-5SCALPINGSCREEN

2022,9x4reclaimer/scalpingscreen,extendeddischargeconveyors, hopperextensions,returnrollerguardingetc.S599. TA1058760. POA+GST,ExWorks

2022,TheTesab800iisaheavydutytrackedjawcrusherdesignedto crushprimaryrockatthequarryface.Basedontheproven10580,the 800ihasanadditionalindependent pre-screenwhichhelpsconsistently producehightonnagesof400+tonnesperhour.Thisofferincludesa partspackage.S659.

MDSM515TRACKEDHEAVYDUTYROCKTROMMEL

2020,350-500tonnesperhour,CAT4.4dieselengine.Hydraulicpushfeeder.The M515TrackTrommelisperfectforcleaningdirtymaterialandcanhandlerocksupto

TRICONSR124HEAVYDUTY3WAYSPLITSCREEN

2021,TriconSR124HeavyDuty3WaySplitScreen12x5Screener.S605. TA1066720. POAExGST,ExWorks

RUBBLEMASTERRM90GO!IMPACTCRUSHER

2022,NewandusedRubbleMasterRM90GO!IMPACTCRUSHERavailablenow.TheRM 90GO!isamobileimpactcrusherthatprovidesthebestperformanceinitsclass withoutsacrificingmobility.-. TA1088683. POA+GST,exWorks

LIPPMANNLR516SCALPING/RECLAIMERSCREEN

NEW2022.ApronFeeder,HopperExtensions,HopperLiners,RadioRemoteControl, 100mmPunchPlate-TopDeck,30mmWireMesh-BottomDeck.S655. TA1137804. $429,000+GST,ExWorks

TESAB800IJAWCRUSHER

TA1151737. $988,900

RUBBLEMASTERRM120XHYBRID

2022,Availablenow!2022hybridRubbleMaster(diesel/electric)mobile crusherC/Wscreenbox&oversizeRECIRC&stockpile.S642. TA1088685. POAexworks

HAMMER,*MUDBUCKET,RIPPER,A7BAUGERDRIVE,12 MONTHS-1500HRSEPPCOVER,3XGPBUCKETS 230MM,300MM450MM,150MM,300MM,450MMAUGER BITS.LJD02934. TA1173353. $60,500

CATERPILLAR336FL

2018,FIREEXTINGUISHER,AMFMRADIO,BEACON BOOMCHECKVALVE,PRODUCTLINK,UNDERCARRIAGE, LONGHANDANDFOOTCONTROL,AUXILIARY HYDRAULICS,STICKCHECKVALVE,LIGHTING,AIR CONDITIONER,TILTMUDAND1GPBUCKET,3DREADY KCS20235. TA1169240. $357,500

CATERPILLARCW34LRC

2018,AMFMCDRADIO,WATERSPRAYSYS AIRCONDITIONER,BALLAST B7L00358.

CATERPILLARD5K2XL

2018,PRODUCTLINK,RIPPER,MULTISH,EROPS, STRAIGHTBLADE,CATCERTIFIEDUSED:ELIGIBLEFOR HD,ADVANTAGE&EPPCOVERQLD/NTENDUSERS ONLY,SALTTRACKS.REMAININGEPPCOVERAGE 01/10/2025OR5500HOURSWOF.AUSTRALIANCONFIG TIER3ENGINE.WT302293. TA1176639. $302,500

ATTACHMENTS HIRE

DAILY WEEKLY MONTHLY LONG TERM

HIRE IT WHEN YOU NEED IT

Depending on the jobs on hand, renting attachments can be an economical and low cost way to excavate, demolish, quarry or mine.

Ability to hire an attachment enables our customers to quote or tender for jobs that require specific equipment they may not have.

TRY BEFORE YOU BUY

An attachment can be rented with the view to purchase new equipment. The rental charge will be refunded should a purchase take place. Conditions apply.

FOR ALL YOUR ATTACHMENT NEEDS

Our rental equipment features over 100 latest hydraulic attachments that are regularly serviced and professionally maintained to ensure a troublefree and productive hire period. Our experienced staff will help you choose the correct attachment to suit your application and specific job.

JOHNDEERE770G 5,272Hours,EROPS,A/CCabin, 14ftBlade,BrandNewMichelinTyres&Rims,Rear Ripper,PushBlock,AM/FMRadio,ExGovernment Grader,PMServiced&WorkshopChecked,Locatedin OrangeNSW.CE1709... TA1180906. From$289,000+GST

JOHNDEERE772GPGRADER 2016,7,655Hours, EROPS,A/CCabin,PushBlock,14ftBlade,Rear Rippers,AM/FMRadio,ReverseCamera,PMServiced&

VOLVOL110H 2017,From2,600Hours,2xUnits Available,EROPS,A/CCabin,QuickCoupler,Third Valve,50%L3Tyres,GPBucket,Scales,UHFRadio,PM Serviced&WorkshopChecked,MineSpecifications AvailableUponRequest(atextracost),AvailableLate June2023.CE1752. TA1173230.

$260,000From$260,000+GST

BRAND NEW ARTICULATED & RIGID OFF-ROAD WATER TANKS

VOLVOA30G 2021,2xUnitsFrom2,127Hours,EROPS, A/CCabin,StandardDumpBody,ReverseCamera, BatteryIsolator,NewGMEUHFRadio,ExcellentRadial Tyres,AM/FMRadio,Tailgate,WorkshopChecked& Serviced.AvailablelateJune2023.CE1731. TA1155788. POA

VOLVOL120H 2021,1,944Hours,EROPS,A/CCabin, QuickCoupler,AutoGreaser,ThirdValve,Loadmaster Scales,FittedwithL5Tyres,GPBucket,FullMineSpec AvailableUponRequest(atextracost),Workshop Checked&Serviced,LocatedinOrangeNSW... TA1154803. POA

CURRYSUPPLYTANKS 2023,CurrySupplyCo&ColemansEquipmenthavean exclusivepartnership,providingthebestqualitywatertanksforoff-highway trucks.Alltanksare100%Australian/USmanufacturedandareregardedhighlyin theindustryfortheirexceptionalworkmanship,quality&design.Wehavetanksto fitavarietyoftrucks,includingCAT725/C,730/C,740/B,745/CArticTrucks,Volvo A25/E/G,A30/E/F/G,A40/E/F/GArticTrucks,&CAT769,773/G,777/D/E/FRigid Trucks.WealsohavetanksavailableforarangeofKomatsu,Terex,andHydrema dumptrucks.CE1530. TA446020. POA

HITACHIZX870LCH-5B 2018,EROPS,A/CCabin, FactoryHandrails&Platform,GPBucket,BrandNew 5M3MassExcavationBucket,AutoGreaseSystem,Full MineSpecificationsAvailableUponRequest,WillbePM Serviced&WorkshopChecked,LocatedinOrange, NSW.CE1726. TA1159334. POA

KOMATSUD65EX-16 2011,2011KomatsuD65EX-16 Bulldozer6,840Hours-EROPS,A/CCabin,Sigma Blade,RearRipperwith3xTynes,ForwardSweeps, E-Stop,Side&RearWindowScreens,Excellent UndercarriageCondition,AM/FMRadio,Willbe WorkshopChecked&Serviced,LocatedinOrange NSW..CE1763.. TA1172979. From$249,000+GST

CATERPILLARD6TXL 8,740Hours,NextGenDozer, EROPS,A/CCabin,SUBlade,E-Stop,MSRRipper, ExcellentServiceHistory,GenuineCATUndercarriage, LEDFlashingLight,PMServiced&WorkshopChecked, LocatedinOrangeNSW.CE1781.. TA1180907. From$295,000+GST

WorkshopChecked,CanbeWired for TrimbleGPSUpon Request(atextracost),AvailableLateJune2023.

SYKESWATERPUMPCP80 80x80x185,poweredby3cylinder CAT/MITSUBISHImotor*priceincludesgst.6659. TA994544. $11,950INCGST

HYUNDAIROBEX55-7EXCAVATOR,4CYLINDERDIESEL newrubber

MASSEYFERGUSON298TRACTOR4WHEELASSIST 4wheelassist, rollframe&roof,newtyresallround,80horsepowerapproximately, 3pointlinkage,PTO,4,800hoursapproximately,hasbeenthrough workshop,readytogo,'nomoneytospend'.7246. TA1180772. $32,000INCL GST

HORWOOD-BAGSHAWMULTITYREDROLLER(GRADERROLLER) ex council.7096. TA1136427. $11,950INCLGST

EXCAVATORBUCKETS2TONNE-15TONNE(BRANDNEW)FMA PLEASECALL0883238795formoreinformationandprices. 7242. TA1177706. POA

JOHNDEERETURFUTILITYVEHICLE/SPRAYERPROGATOR2030A 2016,diesel,yearapproximately2016,vinno: 1TC200GXJHT090114,approximately1,663hoursindicated. 7118. TA1151064. $35,000INCLGST

JOHNDEERE5525FWATRACTOR(08)83238795 withJohnDeere selflevellingfrontendloader,4.1bucket,yearapproximately 2005-2008,4wheeldrive,ROPS&Roof,91horsepower approximately,PTO,withfrontweightframe(noweights), approximately1,968hoursindicated,3pointlinkage,2newfront tyres.7073. TA1125206.

$62,000INCLGST

CATERPILLAR428CBACKHOE 4cylinderturbodiesel, with trenchingbucket,front4.1bucket&forks,showing2,300hours approximately(wethinkgenuine),tyres90%allround,serialno: 428C/8RN012411209565, on plate: 5HK63432/065002/j97/1169/1117814,exceptionalcondition. 7152. TA1166753. $65,000INCLGST

KUBOTAK008-3MINIEXCAVATOR(08)83238795 yearapprox. 2015,serialno:40940,engineno:4EW899,productidentification no:JKUK0081J01H40940,1,800hoursapproximately,4 cylinder diesel,2xbuckets:-450mmGP,900mmtiltingmudbucket,ripper, SWL65kg,folddownrollframe,hydraulictrackadjustment,new rubbertracks,goodtightmachine,readytogo.7062. TA1121629. $19,500INCLGST

CASE580SUPERLELOADER/BACKHOE approx.1997,vinno: CGG0162828,90horsepowerapprox.,4cylinderturbodiesel,5,500 hoursapprox.,4x4,fitting4newtyres,originalbushesinverygood condition.7140. TA1159827.

$55,000INCL GST

MARSHALLMULTISPREAD825TFERTILISERSPREADER AS NEW, USEDONCE,serialno:12087770,2.5-3tonne,allhydraulicdrive, 2xhydraulicspinners,beltfeed,spreadwidthto24m. 7114. TA1149867. $35,500INCL GST

YANMARV4-6WHEELEDLOADER articulated,42horsepower approximately,4cylinderinjectiondiesel,vinno: YMRV4Y6YEAYY61084,4.1bucket,4X4,1,300hoursapproximately. 7133. TA1159444. $44,500INCL GST

FERRARICRANEF310A2 wiredcontrols,serialno:101094,auxiliary hydraulics,yearofmanufacture2011,lastinspection 17.01.22. 7154. TA1168989. $6,900INCL GST

Stock Units For Sale

IMS – PM1050-16TB Track Pugmill

IMS Mobile 40 tonne Cement Silos

IMS Electric modular twin hopper pugmill with 24 meter radial stacker fully automated

IMS 24 meter stacker with loader feed hopper

IMS 14 meter stacker with separate feed hopper with tipping grid

Purchase before June 30 and get 100%tax deduction

IMS 20 meter stacker with a 1200mm wide belt that can stack a 300mm rock and produce 900 tonnes per hour

IMS 15 meter wheel hydraulic conveyor

(RM)

Est. 2005 and Shantui authorised dealer since 2018

Shantui SG21-B6 Grader

16.8 tonne with Cummins 6CTAA 8.3-C215 160kW (214.56hp) engine (Cummins Australia warranty), ZF type powershift transmission - six forward / three reverse, with transmission guarding, no-spin self-locking differential, 17.5x25 tyres, 14 ft blade, rear rippers, front blade, air-conditioned cabin with Australian certified ROPS, tinted glass, suspension seat, and radio.

Price dependent on equipment fitted.

Shantui SG19-B6 Grader

15.8 tonne with Cummins 6CTAA 5.9-C205 153kW (205.17hp) engine (Cummins Australia warranty), ZF type powershift transmission - six forward / three reverse, with transmission guarding, no-spin self-locking differential, 17.5x25 tyres, 12 ft blade, rear rippers, front blade, air-conditioned cabin with Australian certified ROPS, tinted glass, suspension seat, and radio.

Price dependent on equipment fitted.

Shantui SG17-B6 Grader

14.8 tonne with Cummins 6CTAA 5.9-C180 132kW (177.01hp) engine (Cummins Australia warranty), ZF type powershift transmission - six forward / three reverse, with transmission guarding, no-spin self-locking differential, 17.5x25 tyres, 12 ft blade, rear rippers, front blade, air-conditioned cabin with Australian certified ROPS, tinted glass, suspension seat, and radio.

Price dependent on equipment fitted.

Quality Equipment and Warranties that Work

Southern Equipment Sales Pty Ltd

Picton

KENWORTHT359

2013,registeredinNSWuntilJanuary2023.Minimaldamage forwriteoffwasareplacementhoistrequired.Inspectionwill showtheimmaculatepresentationofthetruck-repaired writeoff(bin&hoistrepairs).6F5000000DA449184.

VOLKSWAGENAMAROK

2021,TD1580,WS805,2HAuto,MY21.IridiumGreyWalkinshawW580Sin pristine,brandnewcondition.Whywaitforanewone!Thisisbetterand readyforimmediatedelivery.Alwaysgaraged,firsttoseewillbuy. 2400kmsonclock.BalanceofVW5-yearnewcarwarrantyout2026.

19-29 Curlew Cresc Tamworth NSW 2340

www.philhuntparts.com.au

brendan@philhuntparts.com.au

PHIL HUNT PARTS PHIL HUNT PARTS

RING ALL HOURS

NEW AND S/H PARTS

ALLIS-CHALMERS/HANOMAG/MASSEY

JOHN DEERE INDUSTRIAL

PARTS FOR Dozers, Loaders, Drotts, Graders, Scrapers

WRECKING DOZERS

ALLIS-CHALMERS: Model “M”, HD5, HD6B,E, HD7W, HD7G, HDIIB, EP, HD15-16, HD16DC, HD16DP, HD19-21, HD41B

FIAT: 451C, 555, 605, 50CI, 70CI, AT7C, 8B, BD10B, FD10E, BD20

FIATALLISM100C Justinfordismantling,Allis10,000series engine,wetengineclutch,transmissioningoodorder,Moldboard pitchcylinders,allpartsavailable,PhoneBrendan0267624466. S175. TA1162783. POA

HANOMAG/MASSEY: 2244, 200, 300, 3366, 400, 500, L400C, L600C, D600D Super, D700C

JOHN DEERE : 1010C, 850

LOADERS

ALLIS-CHALMERS: TL12D, TL14, TL20, 545, 605B, 645, 745B,C FIAT: FR20B LD3, LD5, LD7 & LD9 Scoopmobile

HANOMAG/MASSEY 22,33C,44, 55, CL55C,66C-D, 77 GRADERS

ALLIS-CHALMERS: D, DD, M65, 65B, AD30-40, 45, 145, M100A, B, FG95

DRMCO/CHAMPION 562, 600, 720, 740

JOHN DEERE 570, 570A, 670A, 770, 770A, 772A

ALLIS WHEEL TRACTORS

JOHNDEERE670 justinfordismantling,startsrunsanddrives, 6414Tengine,8speedpowershifttransmission,rearrippersand scarifiers,12footmoldboardwithnewedges,goodrubberallround, allpartsavailable,phoneBrendan0267624466.S176. TA1181375. POA

ALLISCHALMERSHD16DC Justinfordismantling,swiveltyne pacificrippers,nearnewlatestyleundercarriageallround,Allis 16,000engine,finaldrivesrebuilt,bulltiltblade,allpartsavailable, PhoneBrendanorPeteon0267624466.S173. TA1153539. POA

AC D17, D19, D21, XT190, 7000, 7010, 7020, 7040, 7060, 7080, 8010, 8050, 8070, 7580, 8550, 440 ALSO AVAILABLE Track Chains, Rollers, Idlers, Sprockets Various 4-1 Buckets, POA

FIATALLISHD16B Justinfordismantling,Standenrippers, immaculateundercarriageallround,bulltiltblade,fulllengthQLD canopy,17,000seriesAllisengine,powershift,segmented sprockets,allpartsavailable.PhoneBrendanorPeteon026762 4466.S174. TA1153541. POA

CATERPILLARCB22 2012,tandemvibratingroller,979hrs.2549. TA1177720. $28,500PLUSGST

CATERPILLARCP44 2011,AirROPScab,lowhrs,goodfeet.2550. TA1176663. $67,500PLUSGST

CATERPILLAR980M 2017,10887hrs,autogrease,loadscales&printer,new reartyres.2527. TA1155845. $345,000PLUSGST

CATERPILLAR311DLRR305DCR 2010,305DCR&311DLRR2010models,$47500&$68500+ GST.S257. TA1176722. POA

CATERPILLARCS533EXT

JOHNDEERE770G 2013,9520hrs,airROPScab,14'blade,ripper,grease system.2531. TA1170221. $245,000PLUSGST

HYUNDAILC210-7HIGHWIDE forestryguarded,Marguard windscreen.Completelyrebuiltinc.replacedslewring.Brandnew motorwithreconditionedinjectionpump.Brandnewvalvebank andhydraulicpump.Rebuiltslewmotor.Newtracks,rollersand sprockets.Fittedwithloggrab.Wouldsuitforprocessororloadout machine.LC210-7. TA1103044. $80,000+GST=$88,000

JOHNDEERE748GIIGRAPPLESKIDDER Verytidymachine.Dual archgrappleand6,000poundwinch.Tyres70%rearand25% frontwithbrandnewchains.Airconenclosedcab,1400series

1991BarkerTrailersBogiefloat.Good condition.BARKERSBOGIE. $30,000+GST=$33,000

CATERPILLAR324DL 2007,Quickhitch.Onebucket.Chainsplates andsprocketschanged2000hoursago.324DL1. TA1173221. $65,000+GST=$71,500

CATERPILLAR12HGRADER 1997,newtyres,newmuffler,well maintainedmachine.Sellingduetoupgrade.12H. $120,000+GST$132,000

AMMANNASC150D 16Tsmoothdrumroller.Goodtidymachine. 2654hours.AMMANDRUM. TA1178747. $47,500+GST=$52,250

KOMATSUPC200-6EXCAVATOR withWaratahhead.Newpumps. 21,491hours.200-6war. TA1097330. $60,000+GST=$66,000

CATERPILLAR12M 2008model.15843hours.Newtyres100 hrs ago.Goodtidygrader.S735. TA1176346. $160,000+GST=$176,000

JCB220LC 2018,brandnewtrackgear,Talonloggraband forestryguarding.Climatecontrolwithheatedseat.Machinestill underwarranty.1200hrs.(Alsoavailablequickhitch&mudbucket $9000+GST).JCB220LC. TA1120729. $165,000+GST=$181,500

KOMATSUPC270-8 withloggrabandcutoffsaw,hours15,467. 2010model.270-8. TA920281. $75,000+GST=$82,500

KOBELCOSK300-3 fittedwithforestryguarding&DonHowlog grab.Newinjectorpump,approximately13,000hours.Tracks 85%.Allnewcomputer&computerwiring.Goodworkingorder. SK300-3. TA1050619. $48,000+GST=$52,800

VOLVOFH12 1995,420HP,airbagsuspension,Bisalloybody, pintallhooktowhitch.FH12. TA1168316. $45,000+GST=$49,500

CATERPILLAR615C scraper.Goodcleanmachine,goodchains. 21,675hoursshowing.Tyre's:2x80%,1x50%,1x25%.615C. TA1146211. $150,000+GST=$165,000

CATERPILLARD6RLGP 2000,withrippers,goodchainsand rollers.D6RLGP1. TA1173218. $135,000+GST=$148,500

hitch,4sparetyresandrims.906. TA1164421. $35,000+GST=$38,500

BARKERTRAILERSBOGIE

CAT906 Loader,4,000hours,4-in-1bucket,woodbucket,quick

TCM810A 1992,4cylKubotaturbo,hours 4200,attachmentsb/hoe, 4in1bucket,exroadscorp,goodtyres,pinsandbushes,clean condition.Otherloadersinstock.S770. TA550235. $24,000

VERMEERT455 1999,doneonly1000hrs,inverygoodcondition, fittedwithslidingtrencherattachment,poweredbya125hpJohn

removabletruckmountedchassis.S476.

FURPHY1200GALVANISEDFIREFIGHTERTANKERTRAILER Fully

CASE660 Ingoodcondition,poweredbya60hpCumminsdiesel engine,fittedwithrollerboomandrockchain, we canfitanew earthtrencherchainatnoextracost.Trencherhasbeenserviced andreadyforwork.S158. TA544148. $35,000+GST

ExMelbourneTramways,approx 4.5ton,wasusedforcarryinggrinders,canbeusedformosttypesof machinery,on6studrims.S710. TA550133. $2,000exclGST

DITCHWITCH6510 1988,6510Perkinscompleterunnerforparts. S350. TA546484. From$55-$500+GST

fortheCV550Trollers,500x125x40.S995.

CUMMINS30DGGC Ingoodcondition,poweredbya4cylCummins B3.3dieselengine,poweringaCummins/Stamfordgenset,auto start,fullengineandgeneratorprotection,fueltankbased,3phase outletsandsinglephaseoutlets,earthleakage.S651. TA549937. $9,000inclGST

TANDEMTRAILER-4.5TON

SAKAICV550T NEWSakairubbertracks,NEWrubbertracksinstock

TA1090568. $5,500

REDROONA 2008,exlocalhireco,poweredbyaV2petrolengine, towable,4"CHIPPERSHREDDER.S972. TA550915. $2,800exclGST

OTHERHYDRAULIC Usedhydraulicwinchingoodcondition,fitted withcapstondrumandcablerecoverydrums,poweredbya4cyl Kubotadieselengine,saftycage,operator'sconsole,allona

$10,000+GST

TRANSFIX2200 1997,exlocalcounciltrailer,CityofMaribyrnong,

TANDEMTRAILER-4.5TON ExMelbourneTramways,approx

KANSAIKDE20T3 NEWGENERATORSET,HP 28hp3cyldiesel, capacity20kva3phs,new.S757. TA550208. $4,000exclGST

> > > BUSINESS FOR SALE < < <

We have the following in stock & available for sale:

2 x JD450J TRACK ASSYS 40 LINK 159 PITCH 405mm G1

9/16X51 BOLTS ASSEMBLED $4,940 EACH

10 x BOTTOM ROLLERS $230 EACH, 2 x TOP ROLLERS $152 EACH, 2 x SPROCKET $285 EACH

CATERPILLAR D10R/T Link

ALL PRICING + GST

Field Service 100 Ton Track Press & Tooling $14,800

Hand Hydraulic 100 Ton Pump $3,800

Mini Excavation: All sizes.. Tracks / Link Assy – Rollers – Idlers / Sprockets – ALL POA

2 x IDLER ASSY $1,250 EACH, ALL PRICES ARE + GST, ALL ASSEMBLED & READY TO GO Contact:

ASSORTED HYDRAULIC HAMMERS. 100 tonne – 1 tonne, new, used & hire. Includes HAMMER HS8000, HS4500, Indeco HP9000, UP7000, MES5000, MES4000, 3000, HP2000. New Sandvic BA 2323 BR3088, S21, S22, S23, S25, S27, S83, S54, S86, E68, Rammer, Atlas Copco, HBC2500, MB1700, MB800, SB150, RFG, MONTABERT V55, V45, BRH501, BRH250, BRH125, Star SH1400, SH992, SH200. Stanley, TNB, Promove. GTX. MUSTANG, Rockram, Rockhammer, Furukawa, GB, KRUPP, SOOSAN SBI00TS, SB70. Can demo, cheap Austwide freight. Photos emailed. Ph: 03 9719 7483, 0433 372 416. (EMP-340--02)

BLUE METAL. 230acre property for sale, large amount of quality metal Test reveal material is suitable for concrete aggregate, road base & ceiling aggregate. Land zoned white, close to rail, plenty of water, 3 phase power. Lowmead area. Ph: 0427 135 554 or 07 4312 1010 QLD. (EMP-343-01)

BUCKETS. New, used & hire. 250ton-1ton, includes 4 in 1’s, loaders, tilts, sorting, rake, clamshell, grapple, trapezoid, telehandler, hammer buckets. MISU screening buckets. Flipscreens, M.B crusher buckets. Photos emailed. Cheap Austwide freight. Ph: 03 9719 7483, 0433 372 416. (EMP-340-03)

LONGREACH BOOMS. 45ton, 30ton, 20ton & 8ton excavator. Also 20ton extension sticks & 7.5ton hydraulic extension booms. Genuine Cat 30 Ton Longreach. Cheap Austwide freight. Photos emailed. Ph: 03 9719 7483, 0433 372 416. (EMP-340-04)

SOLAR POWERED Variable message boards. Techroad 8600, Ditchwitch JT820. Also light towers, trailer mounted. Wacker, Almand Bros. Free rolls. Hire & sale. Photos emailed. Cheap Austwide freight. Ph: 03 9719 7483 or 0433 372 416 (EMP-340-08)

PARTS FOR SALE

ASSORTED PARTS. Lots of rubber tracks. 950 R.O.P.S. Rock Buster 1220, New D155 triple bar grousers, 26.5 x 25 x 28 ply tyres. D65 rollers, combination roller, concrete saws, loader rims & diffs, ZF & Hamworthy, track bases 20 & 30ton. Cheap Austwide freight. Ph: 03 9719 7483, 0433 372 416. (EMP-340-05)

HYDRAULIC EQUIPMENT. Hydraulic motors and pumps, power packs Defence Force, electric & diesel with piston pumps. Many reco piston pumps, elect valve banks, control banks & rams etc… Cheap Austwide freight. Ph: 03 9719 7483, 0433 372 416. (EMP-340-06)

YANMAR EXCAVATOR V1035-3/5, new hydraulic pump. Yanmar final drives V1020-3. V1027-2/3/5, V1035-2/3/5, V1055-5/5B, + hyd slew motor, V1055-5 complete new pins and bushes set for slew/boom/ arm. V1075A yellow slew motor and reduction. Yanmar quickhitch, new switch box 17295817101. Sumitomo slew motor/reduction assy SH1203+5. Ph: 0417 036 866 or (03) 5917 0222 VIC. (EMP-347-01)

WRECKING

DISMANTLING EXCAVATORS & FORESTRY MACHINES. Incl Hyundai R450LC7, 45ton, Kobelco SK75V, CAT320 CFM high wide, Hyundai R210LC7, Timberjack 608, OSA280 & Volvo 462 log forwarders, Volvo EC290 BLC, good bases. Ph: 03 9719 7483, 0433 372 416. (EMP-340-07)

PRIVATE Advertising

KOMATSUWA250PZ-6WHEELLOADER 2012, ex council machine(on2ndowner),newtyres,autogreaser,hay forks,scaleswithprintout,verygoodcondition,77253. QLD. DIY1178886. 0412 800 084. $145,000

WACKERNEUSONDPU7060REMOTECONTROL 2018, dieselvibplate.Excellentworkingorder,locatedBurleigh Heads,384582.QLD. DIY1180279. 0411 020 252. $4,750

DOOSANDAEWOO 1.6tiltmudbucket.new grab & hydraukicQuickHitch,liftinglug,800GPbucket, DHKHEBCOL42001464.QLD. DIY1177608. 0428 163 377.

2018,aggregate4xbin trailer,6T9T25AAJ0AAB016. TAS. DIY1177888. 0459 980 680.

KOMATSUWA470-8 2016,AirconROPS,4.6m3straight edgeGPbucket,InbuiltKomatsuscales,ridecontrol (ECSS),flashinglight,reversecamera,batteryisolator, reversealarm,new26.5R25tyres,272HP/203 kW, 25 tonneoperatingweight,originalpaint,immaculate

HYUNDAI210LC-7 greatexcavator,veryreliable, ready for work,N60716857.VIC. DIY1180947. 0431 250 242. $130,000

FREIGHTMORESINGLEAXLE16T TAG TRAILER 2021, singleaxle16Ttagtrailer,newarnew,goodcondition, rego18-01-2024,YN85FQ.NSW. DIY1180390. 0409 661 737. $32,450

CATERPILLAR966C ROPS,hydraulicquickhitch,straight edgeGPbucket,GPbucketwithteeth,forks,battery isolator,23.5R25tyresize.Greatpropertymachinein goodorder ready towork!,966C.QLD. DIY1181096. 0432 383 088. $45,000

CATERPILLAR938H 2010,11,689hours,airconROPS, 2.8m3straightedgeGPbucket,autogreasesystem,ride control,flashinglight,battery&starterisolator,fire extinguishers,E-stops,20.5R25tyres,180HP/134 kW, 15tonneoperatingweight,servicedand ready towork, 938H.QLD. DIY1180224. 0432 383 088. $125,000

CATERPILLAR306D 2006,with3bucketsonehydraulic ram tilt,CAT 00306VSMD00310.NSW. DIY1177773. 0407 234 235. $49,500

CMQ4BINAGGREGATETRAILER

ATLASCAT345 tiltingbucketto suitcat45ton.Asnew condition.Frontpin.110mm. Rearpin.100mm,441 betweentheears,587mmpin centres,004810. QLD. DIY1179891. 0490 003 800.

KOMATSUD65EX15 New tracks,39link,610mmplates, segmentsandboltsincluded, ..NSW. DIY1180437. 0408 301 788.

UHILG938 2020,wheelloader inasnewcondition, 2010B1486.QLD. DIY1180920. 0407 334 453. $33,000Privatesale

KUB0TAU17-3 2023,mini excavator2TimportedD902 Kubota2023,D902. NSW. DIY1181134. 0403 218 480. $29,099

90Tonneperhourdependingonmaterial.Perfectfor screeningawiderangeofmaterialsandisthefirst choiceforwetandstickyorganicsubstancesincluding;

DIY1177379. 0448 242 007.

JOHNDEERE325G 2023,skid-steer.NormEngineering 4in1bucket,joystickcontrol,high-Ffow,keylessstart, A/Cpressurisedcab(ONLYHAS55hrs), 1T0325GMKPG435906.QLD.

KOMATSUPC55MR-3 2010,with2newbucketsandone usedbucket,1500mmhydraulic ram tiltbucket,..NSW. DIY1172150. 0407 234 235.

VICKEY510WTROMMELSCREEN 2023,4cylinder70HP Dieselengine,30"9'rollerbeltfdr,48"3.2'underscreen reardischargeconveyor.Producesapproximately80to

Soil,Sand,Mulch,Woodpellets/chips,Compost, Domesticwaste,AUS1.QLD. DIY1178745. 0429 588 545. POA

Digger Deals

Welcome to the new Digger Deals classified pages!

These hand-picked items from across our dealer network are a selection of popular categories and great bargains. Scan the QR code to check out the latest price info and see more detailed specs, or call the number listed below each item.

And best be in quick, these items are sure to sell!

2,109 hours. In A1 condition, with low hours it is hard to find a machine in such great condition.

Just $136,345!

Scan code to view, or call 07 35195850

Isuzu engine, 13 ton, 2014 model, 3,099 hours. Steel tracks with rubber pads. Machine weight 12,500kg. Reverse camera, air conditioned cabin.

Just $128,700!

Scan code to view, or call 07 35195850

NEW, comes with Quick Hitch and bucket package. Yanamar engine 4TNV98C, 47Kw/2200 RPM 63HP/2200RPM, machine weight 8900kg.

Just $115,500!

Scan code to view, or call 07 35195850

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2014 Sumitomo SH125X-6

Kobelco SK125SR-3

2023 Sunward SWE90OUF

Scan the QR Code to find out more!

KOMATSU

PC138UU-11

138 hours, GP Bucket, certified ROPS air conditioned cabin, intergrated A/C cabin short tail swing with 3 reverse cameras.

Just $236,500!

Scan code to view, or call 07 35195850

2017 Caterpillar

305E-2CR

Excavator, zero swing, 5 ton capacity, near new rubber tracks, fitted with back fill blade and 450mm bucket. Good late model digger.

Just $46,000!

Scan code to view, or call 02 90647510

2017 Caterpillar

305E2CR

Zero swing, 5 ton capacity, near new rubber tracks, twin slew capability, backfill blade, fitted with 600 wide digging bucket, 2 speed tracks.

Just $45,000!

Scan code to view, or call 02 90647510

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Excavators

Digger Deals

2007 Caterpillar 305SR

Rubber Tracks

Offset boom, backfill blade, rubber tracks, fitted with mud bucket, has crane scales and hook, weighs 5 ton, 8000 hours, good strong excavator.

Just $29,500!

Scan code to view, or call 02 90647510

2023 Sunward SWE60UF

New F Zero Swing, Kubota engine V2607-D1, 36.5Kw/2000 RPM 48.9HP/2000RPM, machine weight 6000kg, 3 year / 3000 hour warranty.

Just $84,689!

Scan code to view, or call 03 9116 6689

2007 Caterpillar 305SR

Rubber Tracks

Offset boom, backfill blade, 600 digging bucket, steel tracks but have pads to suit, has crane scale and hook, weighs 5 ton. Worked 6000 hours, runs well.

2023 Sunward SWE18UF

New 1.8ton. Zero swing mini excavator, Japanese Yanmar engine, KYB main pump, KYB slew motor, KYB final drives.

Just $34,089!

Scan code to view, or call 03 9116 6689

Just $29,500!

Scan code to view, or call 02 90647510

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2023 Sunward SWE25UF

New. 2.6 ton mini excavator comes with Yanmar 1.267L 20HP diesel engine / KYB hydraulics, zero tail swing, ROPS canopy, dozer blade.

Scan the QR Code to find out more! Digger Deals Excavators

Just $49,489!

Scan code to view, or call 03 9116 6689

Sunward SWE9OUF

Yanamar engine 4TNV98C, REXROTH hydraulic, 46.2Kw/2200 RPM, 61.9HP/2200RPM, machine weight 8900kg.

Just $112,200!

Scan code to view, or call 03 9116 6689

Hidromek

HMK500 LC HD

Operating weight 50,800 kg.. Long chassis excavator c/w full track guards. Reach boom 6.9m, long stick 3.3m, 600mm heavy duty triple grouser shoes.

Sunward 4538

Kubota engine stage5 euro 55.4kw/75HP, machine weight 4400kg, operating capacity 1200kg, Bosch Rexroth pump, led working lights.

Just $91,289!

Scan code to view, or call 03 9116 6689

Call for pricing!

Scan code to view, or call 03 6111 4728

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Excavators

Digger Deals

HMK410LCUHD-H4

Operating weight 41800kg. Long chassis excavator. Isuzu AH-6HK1X tier 111 engine 4-cycle diesel, 6-cylinder in-line, direct injection, turbocharged.

Call for pricing!

Scan code to view, or call 03 6111 4728

Hours 4133, double locking Quick Hitch, tilting mud & GP buckets, UHF, emergency E-stop.

Just $67,000!

Scan code to view, or call 03 6111 4728

HMK140W H4

Operating weight 15,700 kg. (approx. plus configuration). Wheeled excavator with dozer Bbade and rear stabilizers. 10.00 pneumatic tyres and rims.

Call for pricing!

Scan code to view, or call 03 6111 4728

2020 Caterpillar 320GC Next Gen 07C Serial# - DKJ21472-5795401 / *CAT00320TDKJ21472*, with a 145HP-108KW C4.4 engine Serial# - 2W214201 Arr# - 6247465 showing 1868 hrs options.

Just $199,650!

Scan code to view, or call 07 3073 8189

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2022 Hidromek

2022 Hidromek

2017 Hyundai R80CR-9

Scan

the QR Code to find out

2023 Hidromek

HMK230LC

26,000kg operating weight, Isuzu AI-4HK1X tier 111 engine, water cooled, 4-cycle, 4-cylinder inline, direct injection, turbocharged diesel.

Call for pricing!

Scan code to view, or call 03 6111 4728

2010 Komatsu

PC350LL

Log oader, Pierce boom kit and butt-n-top grapple with cabin riser, 25,069 machine hours.

Just $65,000!

Scan code to view, or call 03 6111 4728

2020 Caterpillar 330LC Next Gen 07B

Serial# - KEL10892 /

*CAT00330TKEL10892* with a

260HP-195KW C7.1 engine serial#E7A36348 Arr# - 5023531 showing 1055 hrs.

Just $329,450!

Excavators

Digger Deals

Pro New / Unused Serial# - 37668 / *SY005QCC37668* with a 48.2HP-

36.0KW Isuzu 4JG1 engine Serial# - 631735 showing 4.4 hrs.

Just $48,950!

Scan code to view, or call 07 3073 8189

2020 Caterpillar 305.5E2

Arriving May2023* a Used x3-Serial# - WE211595-4715700 / *CAT3055EKWE211595* with a 45.7HP-34.1KW C2.4. 1616 hours.

Just $76,450!

Scan code to view, or call 07 3073 8189

307 Next Gen 07A

Used / Near New x4Serial# - ZGC00759-5804516 / *CAT00307LZGC0759*, 48.2HP36.0KW C2.4T. Engine Serial# - 7FL6959 Arr# - 5147591 showing 192.6 hrs.

2022 Caterpillar 305.5E2

ARRIVING IN MAY Serial# - WE216832-4715700 / *CAT3055EJWE216832* with a 45.7HP-34.1KW C2.4 engine serial# - 7MD02858 Arr# - 5928947 showing 588 hrs.

Just $79,750!

Scan code to view, or call 07 3073 8189

Just $93,390!

Scan code to view, or call 07 3073 8189

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2022 Sany SY55C

2020 Caterpillar

2021

Arriving July 2023* a Used x3, Serial# - MTM05147-6016780 /

*CAT0313DCMTM05147* with a 100HP-75KW C4.4

Just $159,940!

Scan code to view, or call 07 3073 8189

2020 Caterpillar 336GC 07B Next

Gen

Arriving July 2023* a Used / Near New x4, Serial# - JFW108436017268 / *CAT0033 6AJFW10843* with a 260HP-195KW C7.1

Just $381,700!

Scan code to view, or call 07 3073 8189

103.9HP-77.5KW Isuzu, showing 2.0 hrs options include - Air ROPS cab, push button start, led touch screen with reverse camera. Available now.

Just $119,900!

Scan code to view, or call 07 3073 8189

Excavator serial# - ZBT10794-5603280 / *CAT00320KZBT10794*, with a 145HP-108KW C4.4 ACERT engine serial# - 2W214194 Arr# - 6247465.

Just $194,700!

Scan code to view, or call 07 3073 8189

2022 Sany SY135C

Caterpillar 313D2GC

2020 Caterpillar 320GC Next Gen

Excavators

Digger Deals

2019 Caterpillar

305.5E2

Serial# - WE208507-4715650 / *CAT3055EVWE208507* with a 45.7HP-34.1KW C2.4 engine serial# - 7JX6108 Arr# - 4571444 showing 1654 hrs .

Just $73,590!

Scan code to view, or call 07 3073 8189

2020 Caterpillar

336GC Next Gen

07C

Arriving Aug. Serial# - DKJ222435798184 / *CAT00320ADKJ22243*, with a 145HP-108KW C4.4 ACERT engine serial# - 2W220336 Arr#6247465, 1653 hrs.

Just $405,900!

Scan code to view, or call 07 3073 8189

2022 SANY SY135C

Serial# - 21398 / *SY013YCC21398*

with a 98.0HP-73.05KW Isuzu 4JJ1X engine Serial# - 641870 showing 5.0 hrs.

Just $127,600!

Scan code to view, or call 07 3073 8189

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more!

2021 Caterpillar

307 Next Gen

Serial#- ZGC03375 / *CAT00307TZGC03375*, 48.2HP36.0KW C2.4T Engine Serial# - 7ME4663 Arr# - 5147591 showing 11.0 hrs.

Just $95,590!

Scan code to view, or call 07 3073 8189

2020 Caterpillar

320GC Next Gen 07C

Serial# - DKJ22243-5798184 / *CAT00320ADKJ22243*, with a 145HP-108KW C4.4 ACERT engine serial# - 2W220336 Arr# - 6247465 showing 1653 hrs. Arriving Aug.

Just $199,650!

Scan code to view, or call 07 3073 8189

2023 Sunward SWE90OUF

NEW, comes with Quick Hitch and bucket package. Yanamar engine 4TNV98C, 47Kw/2200 RPM 63HP/2200RPM, machine weight 8900kg.

Just $115,500!

Scan code to view, or call 07 35195850

Digger Deals

2017 Tigercat 1075

Forwarder. Large Tigercat F195T85 crane. NAF Bogies fitted with 54 x 37.00 DT logger (Floatation) tyres, fire suppression system. 10,070 machine hours.

Just $265,000!

Scan code to view, or call 03 6111 4728

2022 Tigercat 760B

Mulcher with 4061-30 mulching head.Tigercat (FPT) C13 420 kw (563hp) @ 1,800 rpm tier 2 engine. 35.5 x 32, 30PR Firestone CRC wheels.

Call for pricing!

Scan code to view, or call 03 6111 4728

2008 Tigercat

LH845C

Tracked harvester. Serial No. 84581589. Fitted with Mercedes Benz engine. ESN: 906.991.00.703274. Waratah HTH622B attachment.

Just $110,000!

Scan code to view, or call 03 6111 4728

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Shovel logger. With Tigercat 5195 directional felling head, 9,611 machine hours. Located in Tumut, NSW.

Just $375,000!

Scan code to view, or call 03 6111 4728

648

Skidder, 24,199

Just $65,000!

Scan code to view, or call 03 6111 4728

21,318

Just $75,000!

Scan code to view, or call 03 6111 4728

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2018 Tigercat LS855E

2008 Valmet 890.3

machine hours. Located in Mount Gambier, SA.

2007 John Deere

machine hours. Located in Mt Gambier, SA.

Digger Deals

LH855C

New engine fitted at 11053 hours. Levelling tilt cylinders resealed at 10600 hours. Both final drives & drive motors replaced in Aug 2022. 15035 machine hours.

Just $175,000!

Scan code to view, or call 03 6111 4728

648H

18,963 machine hours. Located in Mt Gambier, SA.

Just $75,000!

Scan code to view, or call 03 6111 4728

Harvester with Waratah 622B harvesting head. Approx. 11,000 hours. Comes with fully optimised Waratah 622B harvesting head. All in good condition.

Just $255,000!

Scan code to view, or call 03 6111 4728

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2013 Tigercat

2017 Caterpillar 521B

2007 John Deere

Scan the QR Code to find out more!

2018 John Deere

650K

With only 3,300 hours. 100HP, 11 ton, sweeps, Forrestry protection, HD 5 shank ripper, new idlers and segments.

Just $219,900!

Scan code to view, or call 07 3171 1145

2012 Caterpillar

D8T

Serial# - J8B00356-2066783 with a 310HP-231KW C15 ACERT Engine

Serial# - LHX01543 Arr# - 2250097 showing 15158 hrs.

Just $368,500!

Scan code to view, or call 07 3073 8189

2017 Caterpillar

D3K2 XL

With only 2,900 hours. 80HP, 9 ton, sweeps, side screens and MS ripper to be fitted. This D3K2 XL will be sold clean, detailed and serviced.

Just $184,900!

Scan code to view, or call 07 3171 1145

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Digger Deals

2014 Caterpillar

D6T XW VPAT

With 9,400 hours. 6 way VPAT blade, Accugrade wired, MS ripper, 220HP. This D6T XW will be sold clean, detailed and serviced.

Just $299,900!

Scan code to view, or call 07 3171 1145

With only 3,700 hours. ARO wired, 100HP, 10 ton, new sweeps, screens and MS ripper to be fitted. This D5K2 XL will be sold clean, detailed and serviced.

Just $204,900!

Scan code to view, or call 07 3171 1145

2014 Caterpillar

D6T

With 8,900 hours. SU tilt blade, sweeps, rear screen, MS ripper with 3 shanks. This D6T XL will behold clean, detailed and serviced with our workshop report.

Just $335,390!

Scan code to view, or call 07 3171 1145

With only 2,900 hours. ARO wired, 10 ton, 100HP, Sweeps, screens and ripper to be fitted. This D5K2 XL will be sold clean, detailed and serviced.

Just $204,900!

Scan code to view, or call 07 3171 1145

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

XL

2012 Caterpillar D5K2 XL

2014 Caterpillar D5K2 XL

2018

D6K2 XL

3,500 hours. 6 way blade, 135HP, 14 ton, grade control, Slope assist. New sweeps, screens and MS ripper to be fitted. (Price before GST)

Just $296,890!

Scan code to view, or call 07 3171 1145

2014

D6T LGP

7,100 hours. Straight tilt blade, genuine sweeps and rear screen, MS ripper to be fitted. (Price before GST)

Just $362,890!

Scan code to view, or call 07 3171 1145

With only 3,200 hours. Sigma tilt blade, MS ripper, sweeps, screens, top con wired, interim tier 4, NON Ad Blue. This D65EX-17 with comprehensive workshop report

Just $380,490!

Scan code to view, or call 07 3171 1145

With 5,800 hours. 6 way blade, 19 ton, 170HP, MS ripper. This D61EX-24 will be sold clean, detailed and serviced with our comprehensive workshop report.

Just $340,890!

Scan code to view, or call 07 3171 1145

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Caterpillar

Caterpillar

2013 Komatsu D65EX-17

2018 Komatsu D61EX-24

Dozers

Digger Deals

2014

D6T LGP

7,100 hours. Straight tilt blade, genuine sweeps and rear screen, MS ripper to be fitted. (Price before GST)

Just $362,890!

Scan code to view, or call 07 3171 1145

2015 John Deere 850K WT

Only 4,900 hours. 6 way blade, GPS wired, MS ripper.

Just $373,890!

Scan code to view, or call 07 3171 1145

2014

4,350 hours. ARO wired, 6 way blade, 135HP, 14 ton. Non ADBlue machine. Sold with new sweeps, screens and MS ripper. (Price before GST)

Just $263,890!

Scan code to view, or call 07 3171 1145

9,400 hours, ARO wired, grade control, 6 way blade, 15 ton, 135HP, MS ripper, tinted windows, near new undercarriage. (Price before GST)

Just $230,890!

Scan code to view, or call 07 3171 1145

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Caterpillar

Caterpillar D6K2

2016 Caterpillar D^K2 XL

With 6,720 hours. 6 way blade, 115HP, 13 ton, MS ripper, complete new under carriage, new cutting edges.

Just $225,390!

Scan code to view, or call 07 3171 1145

With 9,000 hours. SU Tilt blade, sweeps, screens and MS ripper.

Just $241,890!

Scan code to view, or call 07 3171 1145

LGP

With 4,458 hours. 11 ton ,100HP, 6way blade, Forestry package, MS ripper, sweeps and screens.

Just $214,390!

Scan code to view, or call 07 3171 1145

Only 1,600 hours. ARO wired, sweeps, rear screen, side screens and MS ripper to be fitted.

Just $236,390!

Scan code to view, or call 07 3171 1145

Only 1,200 hours. ARO wired, sweeps, screens, HD tank guarding.

Just $274,890!

Scan code to view, or call 07 3171 1145

With 6,800 hours. 6 way blade, MS ripper, good U/C, Top Con wired.

Just $373,890!

Scan code to view, or call 07 3171 1145

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2021 Caterpillar D1 LGP

2014 John Deere 650K XLT

2017 Caterpillar D65PX-18

2016 Caterpillar D3K2

2013 Komatsu D65EX-17

2004 Caterpillar D5N XL

Digger Deals

Only 3,900 hours. ** Price does not include GST ** 6 way blade, 170HP, 18 ton, top con wired.

Just $360,690!

Scan code to view, or call 07 3171 1145

With 6,450 hours. ** Price does not include GST ** ARO wired, grade control, sweeps, rear screen, tinted windows, MS ripper, near new under carriage.

Just $285,890!

Scan code to view, or call 07 3171 1145

With 2,700 hours. ** Price does not include GST ** ARO wired, grade control, slope assist, sweeps, rear screen, MS ripper.

Just $313,390!

Scan code to view, or call 07 3171 1145

* Price does not include GST ** With 4,600 hours. ARO wired, grade control, slope assist, sweeps, rear screen, MS ripper. 100HP, 10.5 ton.

Just $274,890!

Scan code to view, or call 07 3171 1145

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2020 Komatsu D61PX-24

2018 Caterpillar D6K2 XL

2017 Caterpillar D6K2 XL

2018 Caterpillar D5K2 XL

Scan the QR Code to find out more!

D-2 semi-U dozer, 7.04 cu m (9.2 cu yd), complete with all blade components, includes hydraulic tilt and manual pitch. Ripper with hydraulic pitch.

Call for pricing!

Scan code to view, or call 03 6111 4728

Cummins QSC8.3, Tier 3, emission certified, turbocharged, direct start, direct injection, 142kW (90 fwhp). Air cleaner, dry type with exhaust aspirated primary.

Call for pricing!

Scan code to view, or call 03 6111 4728

Dozers

Bulldozer serial# - J8B00356-2066783 with a 310HP-231KW

C15 ACERT engine serial# - LHX01543 Arr# - 2250097 showing 15158 hrs.

Just $368,500!

Scan code to view, or call 07 3073 8189

1999 Caterpillar

D6R

Bulldozer serial# - 7DR004511266742 with a 225HP-168KW

3306DIT engine serial# - 10Z38035

Arr# - 1081076 showing 22254 hrs.

Just $197,780!

Scan code to view, or call 07 3073 8189

2013 machine hours. PAT angle dozer (6-way), 3.20 cu m (4.2 cu yd), full hydraulic, inside arm with hydraulic tilt and angle and manual pitch.

Just $275,000!

Scan code to view, or call 03 6111 4728

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

XL

2022 Dressta TD20Mexlt

2012 Caterpillar D8T

2017 Dressta TD14M Extra LT

Dressta TD15MLT

Graders

Digger Deals

2010 John Deere

670G

With 7,700 hours. 14ft blade, push block, MS ripper. This 670G will be sold clean, detailed and serviced with our comprehensive workshop report.

Just $249,900!

Scan code to view, or call 8 3171 1145

2016 Caterpillar

12M3

4,950 hours. 14ft blade, joystick steering, auto shift, light package, sold with MS ripper and push block.

Just $351,890!

Scan code to view, or call 07 3171 1145

2014 Caterpillar

12M2

9,000 hrs. 14ft blade, auto shift, sold with push-block and MS ripper. This 12M2 will be sold clean, detailed and serviced with our comprehensive workshop report

Just $296,890!

Scan code to view, or call 07 3171 1145

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more!

2022 Hidromek

460MG

Mitsubishi 6D24-T engine, 4 cycle, turbocharged, direct injection, water cooled diesel engine. 116 -138kw (155-185hp) @ 2000 rpm.

Call for pricing!

Scan code to view, or call 03 6111 4728

2022 Tigercat

632H

Tigercat (FPT) N67, 6.7 litre 215 kw (288hp) @ 2100 rpm, 24 valve tier 2 electronic engine with charge air cooling, intake manifold grid air heater.

Call for pricing!

Scan code to view, or call 03 6111 4728

2023 SEM 921

Due mid June. 217HP-162KW with a SDEC SC9D220G2 engine *CAT 3306DIT with Chinese fuel pump, Air ROPS cab, 6F-3R powershift tranny.

Just $230,780!

Scan code to view, or call 07 3073 8189

Graders

Graders/Loaders

Digger Deals

2022 Hidromek MHK230MG

Perkins Tter 3A, 4 cylinders, 4400 cc, 124 HP (92,6 kW) @2200 rpm. Max torque : 530 Nm @1400 rpm.

Call for pricing!

Scan code to view, or call 03 6111 4728

2020 Caterpillar 279D3

480 hours. Highflow 2 speed, reversing camera, Hydraulic quick attach, counter weights, light guarding, stereo. (Price before GST)

Just $186,890!

Scan code to view, or call 07 3171 1145

2022 Sunward SWE60UF

Kubota engine V2607-D1. LED instrument display for easy diagnosis and visibility in both daylight and night environments with WIFI.

Scan

Just $90,200!

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more! Digger Deals

Kubota engine D1703-E4BSWD1. 18.5Kw/2200 RPM 24.8HP/2200RPM. 3 Year / 3000 hour full Comprehensive Warranty on all Sunward mini excavators.

Just $75,020!

Scan code to view, or call 07 35195850

European design SWE18 model is an impressive 1.8ton zero swing mini excavator. Features include an expandable undercarriage from 900mm to 1320mm.

Just $36,245!

Scan code to view, or call 07 35195850

Kubota engine stage5 euro 55.4kw/75HP, machine weight 4400kg, operating capacity 1200kg, Bosch Rexroth pump, LED working lights.

Just $93,445!

Scan code to view, or call 07 35195850

Comes complete with the following features as standard: Yanmar engine 3TNV80FSPSU, 14.6KW/2400RPM20HP/2400RPM.

Just $57,750!

Scan code to view, or call 07 35195850

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2022 Sunward SWE35UF

2022 Sunward SWE25UF

2022 Sunward SWE18U

2022 Sunward SWTL4538

Loaders

Digger Deals

Kubota engine V2403M-DI (V2403M-T) 4 cylinder, water cooling diesel engine, EU, stage 3 emissions, 41.7KW Engine, hydraulic flow 67 L/min.

Just $61,050!

Scan code to view, or call 07 35195850

1,890 hours. Two speed, cab air, heater. Straight and tidy machine. (Price before GST)

Just $115,390!

Scan code to view, or call 07 3171 1145

Two speed, cab air, heater. Straight and tidy machine. (Price before GST)

Just $131,890!

Scan code to view, or call 07 3171 1145

1,150 hours. Two speed, high flow, cab air, heater. Straight and tidy machine. (Price before GST)

Just $127,490!

Scan code to view, or call 07 3171 1145

1,180 hours. Two speed, Hhgh flow, cab air, heater. Straight and tidy machine. (Price before GST)

Just $208,890!

Scan code to view, or call 07 3171 1145

450 hours, highflow, 2 speed, reversing camera, debris kit, light protection, counter weights. (Price before GST)

Just $217,690!

Scan code to view, or call 07 3171 1145

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2021 Caterpillar 259D3

2022 Sunward SWL2820

2021 Caterpillar 299D3

2021 Caterpillar 259D3

2020 Caterpillar 299D3

2021 Caterpillar 259D3

Scan the QR Code to find out more!

Deals

259D

With only 900 hours. 2 speed, New CAT 4 in 1 bucket, very good tracks. Sold with 250hr service.

Just $113,190!

Scan code to view, or call 07 3171 1145

With 2,700 hours. 2 speed, Cab, A/C, sold with new 4 in 1 bucket.

Just $153,890!

Scan code to view, or call 07 3171 1145

Multi terrain compact track loader / skid steer serial#*A3NR17876* with a 66HP-49.2KW Kubota V2607-DI-T-EU3 engine showing 1764 hrs.

Just $89,650!

Scan code to view, or call 07 3073 8189

New unused, two speed, reversing camera, counter weights, quick hitch, GP bucket. 4 in 1 bucket available for additional charge. (Price before GST)

Just $190,190!

Scan code to view, or call 07 3171 1145

995 hours, two speed, reversing camera, air ride seat. (Price before GST)

Just $197,890!

Scan code to view, or call 07 3171 1145

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2018 Caterpillar

2022 Caterpillar 289D3

2020 Caterpillar 299D3

2019 Caterpillar 299D3

018 Bobcat T590 Compact Track Loader

Loaders

Digger Deals

2022 Olympus

ML400 Mini Skid Steer

New. Gen Honda 22HP diesel engine. Overall weight 900kg, LxWxH (mm) 2170 x 1160 x 1370, rated load (kg): 350, max height to Pin (mm) 1914, fuel cap 40L

Just $20,790!

Scan code to view, or call 07 35195966

2013 Caterpillar

259D

Multi terrain compact track loader / skid steer serial# - FTK002923888260 / *CAT0259DHFTK00292* with a 74.3HP / 55.4KW C3.3B engine serial# - 8DQ3091.

Just $80,850!

Scan code to view, or call 07 3073 8189

2019 Caterpillar

257D3

Multi terrain compact track loader / skid steer serial# - FMA00500 / *CAT0257DHFMA00500* with a 74.3HP / 55.4KW C3.3B engine.

Just $108,900!

Scan code to view, or call 07 3073 8189

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more! Digger Deals Loaders

Heavy duty gear box. Integrated high volume air conditioning designed in Australia for Australian conditions.

Just $70,950!

Scan code to view, or call 07 35195850

The anticipated new H850 loader is powered by a genuine 130HP Cummins engine and has been improved for better performance and reliability.

Just $82,250!

Scan code to view, or call 07 35195850

Just $217,800!

Scan code to view, or call 07 35195850

New. 10.5 tonne operating weight, heavy duty chassis, increased dump height, longer wheel base giving superior lifting ability and overall stability.

Just $108,350!

Scan code to view, or call 07 35195850

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2022 Hercules H700

2023 Hercules H1050

2022 Hercules H850

Sem 658D Factory demonstrator with only

Loaders

Digger Deals

Sem 676D

Factory demo with only 540 hours. 270HP. Operating weight 23,000KGS.

Just $262,900!

Scan code to view, or call 07 35195850

2022 Hercules HD656

Operation weight: 17,000kg. LxWxH: 8,279x2,963x3,457. Rated load: 5,000kg. Max dumping height: 3,113mm. Engine model: Cummins. Rated power: 220HP.

Just $196,900!

Scan code to view, or call 07 35195850

2022 Hercules HD668

Operation Weight: 21,000kg. Load sensing hydraulic system provides consistent and precise blade movement.

Just $263,500!

Scan code to view, or call 07 35195850

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more!

14.5 ton excavator, 2021-22 year model, 138 hours, GP bucket, certified ROPS air conditioned cabin, inter-grated A/C cabin.

Just $236,500!

Scan code to view, or call 07 35195850

2023 Hercules

H1250 Next Gen

New. 12 tonne operating weight, large ROPS cabin, Cummins 180HP Engine, 4000 kg lift cap, 1.7m3 bucket capacity, all wheel disc breaks, constant 4x4.

Just $127,050!

Scan code to view, or call 07 35195850

2023 Hercules

636D

Load sensing hydraulic system provides consistent and precise blade movement. A-frame designed drawbar provides strength in all blade positions.

Just $120,945!

Scan code to view, or call 07 35195850

Loader, 1988 year, fitted with 4 in 1 bucket, enclosed ROPS cabin, powershift transmission. Runs well.

Just $19,800!

Scan code to view, or call 02 90647510

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

John Deere 315C Backhoe

Komatsu PC138UU-11

Loaders

Digger Deals

Morooka MS-45

Crawler loader, rubber tracked Morooka MS-45, fitted with Isuzu diesel, full hydrostatic drive with counter rotating tracks, weighs 2.5 ton, 1.8m wide.

Just $24,500!

Scan code to view, or call 02 90647510

Case 480-E

Front end loader, fitted with 4 in 1 bucket with new edge, ROPS cabin, powered by Cummins 4 cylinder engine, power shift forward and reverse, 6,000 hours.

Just $24,000!

Scan code to view, or call 02 90647510

Pallet forks, hay spikes, 4 in 1 buckets all available with the Olympus Loaders and quick hitch pick up compatible with Hercules Loaders pick up.

Just $64,900!

Scan code to view, or call 07 35195966

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2021 Olympus FL927CR Farm Master

Scan the QR Code to find out more!

New model tool carrier loader with auto lube system, hydraulic quick hitch and auxiliary hydraulics. Pallet forks, hay spikes.

Just $82,500!

Scan code to view, or call 07 35195966

Articulated wheel loader YX667 HD (heavy duty) new model tool carrier loader with hydraulic quick hitch and auxiliary hydraulics.

Just $203,500!

Scan code to view, or call 07 35195966

90HP, diff locks, 12 speed.

Just $57,915!

Scan code to view, or call 07 35195966

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2022 Olympus

YX904 YX Series

2021 Olympus FL933 Farm Master

Olympus YX667HD Loaders

Loaders

Digger Deals

FS270 FS Series

Articulated wheel loader FS270 Cummins 100HP engine.

Just $66,000!

Scan code to view, or call 07 35195966

9 ton articulated wheel Llader FS300 Cummins 130HP engine.

Just $82,000!

Scan code to view, or call 07 35195966

FS400R

12 ton articulated wheel loader

FS400r (rippers) Cummins 180HP engine.

Just $126,500!

Scan code to view, or call 07 35195966

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2023 Olympus

2023 Olympus

2023 Olympus

FS300 FS Series

Scan the QR Code to

Digger Deals

FS400

Articulater wheel loader, Cummins 180HP engine.

Just $104,500!

Scan code to view, or call 07 35195966

Duty

Heavy

Our latest release loader is the Olympus YX636HD 130hp Weichai engine with 2 speed transmission this is our HD (heavy duty) range for the agricultural market.

Just $115,500!

Scan code to view, or call 07 35195966

Loaders

New model tool carrier loader with hydraulic quick hitch and auxiliary hydraulics. Pallet forks, hay spikes, 4 in 1 buckets .

Just $115,500!

Scan code to view, or call 07 35195966

Pallet forks, hay spikes, 4 in 1 buckets all available with the Olympus loaders and quick hitch pick up compatible with Hercules loaders pick up.

Just $137,500!

Scan code to view, or call 07 35195966

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2023 Olympus

2021 Olympus YX636HD

Olympus YX638HD

2021 Olympus YX646HD

Digger Deals

YX657HD Heavy Duty

Pallet forks, hay spikes, 4 in 1 buckets all available with the Olympus Loaders and quick hitch pick up compatible with Hercules Loaders pick up.

Just $165,000!

Scan code to view, or call 07 35195966

2020 Olympus YX656HD

New model tool carrier loader with hydraulic quick hitch and auxiliary hydraulics, pallet forks, hay spikes, 4 in 1 buckets.

Just $159,500!

Scan code to view, or call 07 35195966

Telescopic wheel loader. New model now with 4 speed transmission for greater road speed.

Just $71,500!

Scan code to view, or call 07 35195966

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2021 Olympus

2021 Olympus TL528

Scan the QR Code to find out more! Digger Deals

Backhoe loader. Approx. 7800hrs, good condition, 4in1 Quickhitch front bucket, standard rear bucket, JCB Quickhitch on backhoe, tyres good.

Just $59,950!

Scan code to view, or call 03 6111 4728

Backhoe loader, 2732 machine hours. Fitted with: A2 tilting Quick Hitch, emergency stop buttons x 2, battery & starter isolators, UHF radio and fire extinguisher x 2.

Just $135,500!

Scan code to view, or call 03 6111 4728

938K

Wheel Lloader Serial# - XXT00846 / *CAT0938KKXXT00846* with a 188HP-140KW C7.1 ACERT engine serial# - E7A02863 ARR# - 3711441 showing 13355 hrs.

Just $137,940!

Scan code to view, or call 07 3073 8189

approx machine house, fitted with Loadrite scales, 5.0m3 bucket.

Just $105,000!

Scan code to view, or call 03 6111 4728

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2012 JCB 3CX

2015 Caterpillar

2020 Hidromek HMK102B Supra

2005 Komatsu WA500-3H 18776

Digger Deals

2022 McCloskey

SF50

Feeder/stacker, Cat engine, hydraulic tipping grid.

Call for pricing!

Scan code to view, or call 07 3073 8201

2023 McCloskey C3

New generation of cone crushers from McCloskey International.

Call for pricing!

Scan code to view, or call 07 3073 8201

2023 McCloskey

I44RV3

Ideal for some of the toughest project sites worldwide, including asphalt recycling, concrete recycling, rock crushing, construction and demolition.

Call for pricing!

Scan code to view, or call 07 3073 8201

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more!

2021 McCloskey

WS3250

15m stockpiler, 800mm belt, electric/hydraulic/dieselMcCloskey quality engineered.

Call for pricing!

Scan code to view, or call 07 3073 8201

2022 MSC

Hydrascrew 100 New.

Call for pricing!

Scan code to view, or call 07 3073 8201

2023 McCloskey

I54RV3

Available with various blow bar material options, the I54v3 is versatile and easily transported. It has a minimal setup time, maximizing on-site production time.

Call for pricing!

Scan code to view, or call 07 3073 8201

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Screening/Crushing

2023 McClosky

S190 Tripledeck

New. 20’x5’ tripledeck deck, 100mm remote tipping grid, Cat C4.4 130hp - McCloskey quality engineered.

Call for pricing!

Scan code to view, or call 07 3073 8201

2023 McClosky

R230

Hardox apron feeder, 20’X6’ screenbox, Cat C6.6.

Call for pricing!

Scan code to view, or call 07 3073 8201

2023 McCloskey

134R

Compact impact crusher range is the perfect solution for projects with small footprints but big requirements.

Scan

Call for pricing!

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more!

2023 McCloskey

R155

Scalper. Hardox apron feeder, hopper wings for FEL operation, Cat C4.4, punch plate top deck, radio remote.

Call for pricing!

Scan code to view, or call 07 3073 8201

2022 McCloskey

TS4065V2

Track stacker is a 40” x 65’ (915mm x 19.8m) track mobile stacking conveyor, allowing quick and easy movement with minimal effort.

Call for pricing!

Scan code to view, or call 07 3073 8201

2022 McCloskey

TS4080

24m tracked stacker, diesel engine, 1000mm belt, hydraulic tail fold McCloskey quality engineered.

Call for pricing!

Scan code to view, or call 07 3073 8201

Digger Deals

2023 McCloskey

S130 High Energy Screener

14’x5’ two deck, 100mm remote tipping grid, Cat 130hp.

Call for pricing!

Scan code to view, or call 07 3073 8201

Anaconda FTR150

New. Weight: 13300kg - Weight with tipping grid 15000kg - Weight with vibrating grid 17800kg power pack: TIER 3 JCB 444 DIESELMAX 63KW engine.

Call for pricing!

Scan code to view, or call 03 6111 4728

Striker JQ1170

Jaw crusher. 7/10 m3 capacity. Caterpillar 265kw Tter 111 diesel engine fuel tank 640 litre hydraulic tank 620 litre.

Call for pricing!

Scan code to view, or call 03 6111 4728

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

New. Course gravel washer hydraulic or electric dive available.

Call for pricing!

Scan code to view, or call 07 3073 8201

20’x5’ two deck, 100mm remote tipping grid, Cat C4.4 130hpMcCloskey quality engineered.

Call for pricing!

Scan code to view, or call 07 3073 8201

5 / 7 m3 Capacity fitted with Metal Detector. Caterpillar C13 328kw Tter 3 ACERT diesel engine, fuel tank 840 litre, hydraulic tank 600 litre.

Call for pricing!

Scan code to view, or call 03 6111 4728

7 / 10 m3 capacity, hydraulic folding, hydraulic locking, blanking plates & 43mm Grizzly bars.

Call for pricing!

Scan code to view, or call 03 6111 4728

Trommel screen.7,400 hours. This mobile unit is ideal for a startup business or someone needing a large unit on a small price tag.

Just $65,000!

Scan code to view, or call 03 6111 4728

Tracked conveyor. Hardox lined hoppers, lanyards, under conveyor guarding, heavy duty machine, suitable to jump into any quarry operation, 647 machine hrs.

Just $151,600!

Scan code to view, or call 03 6111 4728

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2022 MSC Hydrascrew 175C

2023 McCloskey S190

Stiker CQ400 Cone Crusher

2022 Striker HQR1112

1996 Powerscreen 830

2022 Anaconda TR7542

Digger Deals

Atlas Copco

XAS350GD

700 cfm capacity, 125 psi working pressure, 6 cylinder diesel powered, all mounted on steerable 4 wheel trailer. Runs well.

Just $18,000!

Scan code to view, or call 02 90647510

Maruzen Bed Borer

B8

5-12 ton excavator, has two sets of augers, one 200mm dia the other 300mm dia. There a 10 augers of each size, has controller for remote operation, extra pins and bushes.

Just $16,500!

Scan code to view, or call 02 90647510

1999 Palsonic 7B

Pile driver, 99 year of manuafacture, weight 1550 kg, 2 way vibrating oscillation for driving or removing piles, suit crane or 20 ton excavator, long control hoses.

Just $19,000!

Scan code to view, or call 02 90647510

1987 Hyster H2.50XM/6

H2.5XM/6 lgp / gas forklift serial# - D177B36480U with a 4TNE92 4 Cyl diesel engine Serial# - 1220 showing 12453 hrs .

Just $11,990!

Scan code to view, or call 07 3073 8189

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more!

Rex Soil Stabilizer

Grinder HDS-Pulvi

Soil stabiliser grinder, rex model HDS-PULVI, fitted with cab with certified ROPS frame, Detroit engine, hydrostatic drive, drum has bullet teeth and cuts 1.2m wide.

Just $38,000!

Scan code to view, or call 02 90647510

2010 Kohler KR44

40KVA

40 kva, KR44, silenced, powered by 4 cylinder Kohler diesel, has 3 phase and single phase outlets, fully bunded base with fuel tank.

Just $8,000!

Scan code to view, or call 02 90647510

2022 Hidromek

HMK130CS

Operating weight 13,250 kg.

Vibration frequency, for high amplitude/for low amplitude : 30 / 27,5 Hz amplitude, high/low : 2,01 / 0,81 mm.

Digger Deals

Call for pricing!

Scan code to view, or call 03 6111 4728

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Digger Deals

2022 Hydrema 707G

Articulated chassis with oscillation of 12 degrees. 3.5m3 high tensile steel tray body with 7 tonne carrying capacity. One-step entry for easy access.

Call for pricing!

Scan code to view, or call 07 3707 6349

2022 Hydrema 912ES

EROPS spacious cabin, reverse camera and full safety pack. 5.6m3 body with 10T payload & multi-tip swivel system.

Call for pricing!

Scan code to view, or call 07 3707 6349

2022 Hydrema

912HM

EROPS spacious cabin, reverse camera and full safety pack. 5.6m3 body with 10T payload & multi-tip swivel system.

Call for pricing!

Scan code to view, or call 07 3707 6349

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2022 Hydrema

912GS Rail

Factory designed & built Hi/Low Rail System. EROPS spacious cabin, reverse camera and full safety pack.

Call for pricing!

Scan code to view, or call 07 3707 6349

Kubota RTV900

4wd, 2005 year, ROPS, tow bar, Kubota diesel powered 3 speed transmission, hydraulics for tip body, can be used to power hydraulic attachments, slasher etc.

Just $12,000!

Scan code to view, or call 02 90647510

Wacker Neuson 2011

Remote control trench roller, model: RT82-SC-C, 3 cylinder Kohler diesel, water cooled, 80mm, 588 wide hours.

Just $15,500!

Scan code to view, or call 07 3519 5720

Digger Deals

Atlas 7 Ton

Jaws made bucket.

Just $1,100!

Scan code to view, or call 07 3519 5720

Unused 22-20 Ton Mud Bucket

Good bucket for Ditch cleaning 2100mm wide.

Just $4,400!

Scan code to view, or call 07 3519 5720

6 Foot Cultivator

To suit 50 -80 hp tractor with extra set off tynes.

Just $3,500!

Scan code to view, or call 07 3519 5720

900mm bucket to suit Caterpillar 325 C,D, Sumitomo sh250, Kobelco sk260 Hitachi zx270, Komatsu pc270 Doosan, Hyundai 90mm pins.

Just $2,750!

Scan code to view, or call 07 3519 5720

AHA Cat Backhoe 900mm

Bucket 900mm gp with chisel teeth 50mm front 45mm rear pin 450mm also available extra cost.

Just $2,200!

Scan code to view, or call 07 3519 5720

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Dromone 900mm GP Bucket

Earthmaster 20-24 Ton

Ripper 20 ton 80mm pins. Caterpillar, Komatsu, Hitachi, Kobelco, sumitomo, Doosan, Hyundai.

Just $3,500!

Scan code to view, or call 07 3519 5720

Caterpillar 432E GP Bucket

900mm bucket to to suit Caterpillar backhoe, 450mm also available.

Just $1,200!

Scan code to view, or call 07 3519 5720

Strickland MFG Job 3CX 600mm

3cx 600mm dig bucket to suit job 3cx backhoe factory teeth.

Just $990!

Scan code to view, or call 07 3519 5720

Rock Grab

To suit 300 Komatsu, 90mm pins / 515mm centres / 355mm ear spread, Australian made EMG.

Just $6,500!

Scan code to view, or call 07 3519 5720

Hydraulic Plate Compactor

To suit 20-30 ton excavator, Korean made plate, unused, 90mm front pin, pick up.

Just $7,500!

Scan code to view, or call 07 3519 5720

Hammer 360 Degree Rotation

Hydraulic grab. Italian made quality, to suit 18-24 ton excavator, net weight 1,000kgs.

Just $12,500!

Scan code to view, or call 07 3519 5720

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Digger Deals

JCB 3CX-4CX

1800 mm mud bucket, to suit Jcb 3cx 4cx backhoe.

Just $1,200!

Scan code to view, or call 07 3519 5720

Grab Bucket

Grab bucket to suit 30 ton Excavator, Heavy duty with hydraulic ram, 1400mm wide.

Just $6,000!

Scan code to view, or call 07 3519 5720

Used 20-24 Ton Sieve or Skeleton

Gp 20-230 ton bucket.

Just $6,600!

Scan code to view, or call 07 3519 5720

Auger Torque Drive

With 65mm round shaft to suit excavator S and skid steer loader. The perfect choice for excavators between 2T-5T.

Just $2,000!

Scan code to view, or call 07 3519 5720

2018 GEW CAT320,322,324 BC,D

Heavy duty GP bucket to suit 20 to 24 ton CAT excavator. J series teeth ,wear plate on bottom of bucket.

Just $3,500!

Scan code to view, or call 07 3519 5720

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more!

Hammer RK20

Concrete pulveriser to suit 20-26 ton excavator, full rotating head for easy operator use.

Just $19,900!

Scan code to view, or call 07 3519 5720

Digger Deals

Turners 1800 Mud Bucket

Turners Engineering 1800 Mud Bucket to suit 20 ton.

Just $3,685!

Scan code to view, or call 07 3519 5720

Turners 40 - 50 Ton Ripper

Pin 110mm,, pin centres 565, ear width 470mm, length of ripper 1200mm.

Just $5,000!

Scan code to view, or call 07 3519 5720

Caterpillar GP Dig Bucket

To suit 25 to 30 ton class excavator, esco teeth. Caterpillar 329, 330 B, C, D, Kobelco 330, Sumitomo 330, 240, Case 330.

Just $7,000!

Scan code to view, or call 07 3519 5720

Bucket Trench - Heavy Duty 650mm

To suit 20-24 ton excavator 80mm pins /327mm ear spread /460mm pin centres. Bucket to suit Komatsu PC228. Cat 320B, C, D, E. Hitachi ZX210.

Just $3,300!

Scan code to view, or call 07 3519 5720

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Digger Deals

Caterpillar 953C

Track loader bucket, quick hitch type, 2380 wide, good order.

Just $6,000!

Scan code to view, or call 02 90647510

2021 4TE FCP3061

Plate compactor vibrating, brand new, 4TE, model FCP3061, 900 wide, head has 80 pins, 460 centres and 335 between ears. Weight is 1060 kg.

Just $9,000!

Scan code to view, or call 02 90647510

2016 Cardley Bingham Versavibe

Post or sheet piler, will drive and extract 100 to 280 dia post or pipe, force 3500 kg at 38 times per second, fitted with high lift frame.

Just $24,500!

Scan code to view, or call 02 90647510

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

2008 ICE 625B

Pile driver, Ice model 625B, 2007 year, centrifugal force, 410kn, boom lifting torque, 120kn amplitude 13mm, frequency 42HZ, drive power 83kw.

Just $34,500!

Scan code to view, or call 02 90647510

Okada TS850

Pulveriser,has reo bar cutter, manual 360 degree rotation, opens 850mm wide, head has 100 bosses, pinned to 80mm, 375 between ears and 520 pin centres.

Just $14,000!

Scan code to view, or call 02 90647510

Labounty MDS112R

Jaw opening is 545mm, has head to suit Caterpillar 345 excavator, 120 pins, 585 pin centres with 490 between ears. Comes with own carry frame, weight is 3 ton.

Just $34,000!

Scan code to view, or call 02 90647510

Digger Deals

Oz 1200mm Tilt Bucket 2.7-3.8T 1200mm tilt bucket to suit Yanmar, Kubota, Kobelco, Caterpillar, Komatsu with bolt on edge.

Just $1,850!

Scan code to view, or call 07 3519 5720

Berti Trincarnini

2000

Mulcher, cuts 2m wide, has vertical lift for tree pruning, sideshift swing to cut beside tractor, heavy swinging cutters, will cut heavy scrub.

JB Hydraulic Hitch Parts

Many different Parts to suit Jb Hitches front locks and rear sliders. Bodies to suit 13 ton and 20 ton hitches.

Just $100!

Scan code to view, or call 07 3519 5720

Just $8,000!

Scan code to view, or call 02 90647510

Labounty MDS112R

Jaw opening is 545mm, has head to suit Caterpillar 345 excavator, 120 pins, 585 pin centres with 490 between ears. Comes with own carry frame, weight is 3 ton.

Just $34,000!

Scan code to view, or call 02 90647510

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more!

Caterpillar 953C

Track loader bucket, quick hitch type, 2380 wide, good order.

Just $6,000!

Scan code to view, or call 02 90647510

2021 4TE FCP3061

Plate compactor vibrating, brand new, 4TE, model FCP3061, 900 wide, head has 80 pins, 460 centres and 335 between ears. Weight is 1060 kg.

Just $9,000!

Scan code to view, or call 02 90647510

2016 Cardley Bingham Versavibe

Post or sheet piler, will drive and extract 100 to 280 dia post or pipe, force 3500 kg at 38 times per second, fitted with high lift frame.

Just $24,500!

Scan code to view, or call 02 90647510

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Digger Deals

BBB Wood Shear

Tree or log shear, built by Better Built Buckets, suit 30-40 ton excavator, 100mm pins at 600 centres with 420-480 between ears. Good order.

Just $20,000!

Scan code to view, or call 02 90647510

Jaws PC800-6

Bucket suit 80 ton Komatsu PC800-6, Jaws brand, 2.2m wide, reversable teeth, pins are 130 and 110, ears are 560-630, and pin centres are 660. Weight of bucket is 5.7 ton.

Just $17,000!

Scan code to view, or call 02 90647510

Manipulator MP1

Grapple manipulator, set up for picking and placement of large concrete or sandstone blocks, suit 30-40 ton excavator, has 360 degree hydraulic rotation.

Just $16,000!

Scan code to view, or call 02 90647510

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Scan the QR Code to find out more!

Komatsu PC800-6 Dipper and Ram

Will suit most 80 ton excavators, ram and dipper in good order.

Just $10,000!

Scan code to view, or call 02 90647510

Bobcat Wide Bucket 2.2

2.2m wide, has bolt on edge,Big wide genuine Bobcat bucket made in USA. .

Just $2,000!

Scan code to view, or call 02 90647510

Digger Deals

Pacific V24-D

Roller Padfoot Tagalong, Pacific V24-D, weight is 13.5 ton, vibration is powered by Deutz air cooled 6 cylinder engine, very good feet and scraper bars.

Just $24,000!

Scan code to view, or call 02 90647510

JEC 120

Crusher grinder bucket, has head plate to suit 20-25 ton excavator, 80 pins, 470 centres with 350-410 between ears. Crushes down to 40mm, bucket weight is 2 ton.

Just $21,000!

Scan code to view, or call 02 90647510

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Digger Deals

Caterpillar 950966

Dozer blade, suit Caterpillar 950 to 966 size machine, blade is 3450 wide, has hydraulic angle and also side shift. Set up for quick hitch pick up, very versatile blade.

Just $10,500!

Scan code to view, or call 02 90647510

Bobcat Concrete Mixer Bucket

New. Bobcat mounted concrete mixer bucket, brand new, 1,350 wide, has hydraulic actuated 150 diameter concrete release shute, one third cubic metre capacity.

Just $5,900!

Scan code to view, or call 02 90647510

Caterpillar Rubber Track

Used, suit Cat 305E-2, 5 ton size excavator. Good set of spare tracks.

Just $1,500!

Scan code to view, or call 02 90647510

Digga BR410

Bobcat sweeper, model BR-410, sweeps 1.6m wide, good broom and collector bucket, weight of unit is 400kg, good sweeper.

Just $4,500!

Scan code to view, or call 02 90647510

156

EXEQ 08

Pulveriser, brand new, suit from 18-25 ton excavator, pick up size bosses 110mm, pinned to 80mm, centres 450mm, ears 365mm, opens to 870mm.

Just $25,000!

Scan code to view, or call 02 90647510

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Earthmovers & Excavators

Scan the QR Code to find out more!

Digger Deals

Grapple complete with RPA4570R-RGP1300 (power attachment, w/360° cont. rotator), VOS3 (Patent pending, valve-on-swivel, ready to install a saw).

Just $65,050!

Scan code to view, or call 03 6111 4728

Loader bucket. In as-new condition (removed from machine to alternative attachment). Bucket has work only 50 hours.

Just $8,000!

Scan code to view, or call 03 6111 4728

Pulveriser, brand new, suit from 5-10 ton excavator, pick up size bosses 75mm, pinned to 60mm, centres 303mm, ears 230mm, opens 380mm wide

Just $10,000!

Scan code to view, or call 02 90647510

Felling saw attachment, 340° rotating wrist. Fitted with new Hhydraulic drive motor and spindle.

Just $65,000!

Scan code to view, or call 03 6111 4728

Pulveriser, brand new, suit from 12-16 ton excavator, pick up size, bosses 90mm, pinned to 65mm, ears 330mm, centres 375mm, opens to 590mm wide.

Just $15,000!

Scan code to view, or call 02 90647510

Located in Bridgewater, Tasmania. No rotation. Weight: 590kg. Working pressure (bar): 330. Capacity (M3): 0.5.

Loading capacity: 3500kg. 5 jaws.

Just $9,900!

Scan code to view, or call 03 6111 4728

*Prices and details are indicative only – scan each item’s QR code or call for up to date pricing, availability and information

Rotobec RPA4570R RGP1300

2022 EXEQ 04

2013 Tigercat ST5702

2022 Hyundai HL770-9

EXEQ 06

Hidromek Grapple

Victorian era

A new Melbourne branch for Toyota Material Handling Australia will take the company to the next level

Toyota Material Handling

Australia (TMHA) has opened a new Melbourne branch, which it says will create new opportunities for its clients.

Located on TMHA-owned land in the Melbourne suburb of Dandenong South, the 17,000 square metre space is all under one roof, and has a total of 12,140 square metres dedicated to warehouse and workshop space.

Designed to accommodate the assembly, sales, hire and servicing of forklifts, scissor lifts, skid steer loaders, sweepers and scrubbers, pallet jacks, elevated work platforms and automatic guided vehicles, the facility will also be the base of TMHA’s workshop and field services divisions.

The new facility also includes another 9,900 square metres of hardstand, specialised sealed and pressurised paint and preparation booths and a dirt demonstration area to showcase the brand’s Huski excavator range.

King move

Built tough for extreme conditions, Kaeser Compressors’ Mobilair M120 portable compressor is now available to order in Australia.

Kaeser says the machine can be used in quarrying, mining or blasting applications, able to deliver up to 11.3 cubic metres of compressed air per minute, or 400 cubic feet per minute.

It can run seamlessly on high-sulphur diesel, and continues operating in the green zone even when ambient temperatures reach above 50 degrees Celsius.

Equipped with a Tier 3 emissions Cummins engine, a certified spark arrester and an automatic engine shut-off valve, the compressor also features a new oil separator design with two spin-on cartridges, ensuring a low residual oil content for the compressed air.

It also has 4,110 square metres of office space over two levels, including open plan areas, meeting rooms, lunchrooms, a board room and a spectacular new reception area with a statement staircase.

TMHA plans to use the new facility as the base of its major and corporate accounts operations, as well as facilitating the sales and rental of its forklifts and other equipment.

As well as its inventories of new material handling and Huski equipment, the new complex has 935 cubic metres of space dedicated to storage of spare parts as well as training facilities for staff.

TMHA general manager of corporate compliance and project development Bob Walmsley says the new branch will allow for a greater level of usability and innovation for the TMHA brand.

“Our new state-of-the-art facility will offer more for our valued Victorian customers,” he says.

Start-up is at the push of a button; the machine then runs unloaded, thereby ensuring safe cold starts in all conditions. The display indicates the end of the warmup phase, after which the machine can be switched to load to begin generating compressed air.

The Mobilair M120 gives the operator two choices of pressure stages, one to a max. of 10.3 bar (125 psi) and the other up to 14 bar (200 psi), adjusting the maximum possible flow rate to match the pressure set at the controller thanks to its innovative pV control.

Depending on the desired application, the system can also be equipped with an aftercooler or a microfilter combination for technically oil-free compressed air.

Rather than being discharged from the machine, accumulating condensate is evaporated by the hot exhaust gases from the engine, ensuring eco-friendly operation.

The M120 is available as a construction site chassis equipped with parking brake, a road-going chassis fitted with a run-on brake and lights for towing on the public highway, or as a stationary version mounted on skids.

Integrated forklift guides and lifting eyes, which can be reached via climbing aids, are fitted as standard.

Kaeser Compressors’ Mobilair M120 compressor is easy to use and hard to beat

The new facility is based at 253–281 Discovery Road, Dandenong South

Brett:

Sunny: 0418 781 835

E-mail: sales@diesel-engine.com.au

Address:

QLD 4172

KALMAR(NEW)DRU450 SOLD-Another available.Reachstackerfromglobalindustry leadingporthandlingequipment manufacturer.S89. TA1081384.

ForSaleorHirePOAHiretoBuy

KALMARDRT450-65S 2013,Stacksladen 20x40containers5high.CumminsQSM11 dieselengine.Dana15.5HR36000 transmission.Fullyenclosedairconditioned cab.H10300280. TA1153805.

ForSaleorHirePOAFreeCall1800688788

KALMARDRF450-60S5M 2012,Stacksladen 20x40containers5high.CumminsQSM11 dieselengine.Dana15.7TE32xmsn.Axletech driveaxlewithwetdiscbrakes.ACcab.S99.

TA1153810.

ForSaleorHirePOAFreeCall1800688788

HYSTERH18.00XM-12 2008,stacks12,000kg highcube20'&40'4high.ELME55820x40 spreaderwithtopentrytwistlocks.Frontline unitready for immediatedelivery.R3547.

TA829125.

ForSaleorHirePOAFreeCall1800688788

HYSTERH18.00XM-12 2008,18,000kg highcube20'containers3highwith2440forks +forkpositioningsideshift.Option14,000kg withELME558Sidelift for 20'and40' highcube.R3282. TA511086.

ForSaleorHirePOA$FreeCall1800688788

HYSTERH18.00XM-12 withforkpositioning sideshiftcarriage,2440mmforks,Cummins engine,fullyenclosedairconditionedcabOption20x40sideliftcont.frame.R3632.

TA1124211. POA

HYSTERH20.00F 2009,Smallestinthisfamily ofmostrobust20tonto32tonforklifts.Can landtransportfullyassembledready for work Cumminsengine,sideshiftandfork positioning2440mmforks.E008E02372G.

TA1153814.

ForSaleorHirePOAFreeCall1800688788

HYSTERH16.00XM-6 2010,canstack20' highcubecontainers2highcirca11,000kgat 1200mm.Cumminsdieselengine.2440mm forks,sideshiftandforkpositioningcarrige A/Ccab.S100.

TA1153811.

CATERPILLARDP160N 2009,hassideshift withforkpositioningand2440mmlongforks. Fullyenclosedairconditionedcab,powershift transmission.Easymastontransportready for workwith4500mmliftheightabletostack20' highcubecontainers2high.T40A10068.

TA1153855.

ForSaleorHirePOAFreeCall1800688788

CLARKC500Y650D 1983,stacks28,000kg20' highcubes3high.Hassideshift&fork positioningplus8'forks.Cummins6CTdiesel, ClarkHurth28000powershiftxmsn.Easy staircaseaccesstohighviscab. 084AUFL4890. TA1153864.

GoodRunnerataffordableprice$55,000 FreeCall1800688788

MOBICON33T loadunloadandtravel 33,000kg20'and40'shippingcontainers.For sale&wanted.R3299. TA148664.

ForSaleorHirePh:1800688788POA

KONECRANESSMVSL32-1200B 2011,rated 32,000kgat1200mmloadcentre,canstack highcube20'containers2high.Road transportwithoutdemobe.R3376. TA1038152.

POAForSaleorHirePh:1800688788

19-29 Curlew Cresc

Tamworth NSW 2340

www.philhuntparts.com.au

brendan@philhuntparts.com.au

PHIL HUNT PARTS PHIL HUNT PARTS

RING ALL HOURS

ALLIS-CHALMERS/HANOMAG/MASSEY

JOHN DEERE INDUSTRIAL

PARTS FOR Dozers, Loaders, Drotts, Graders, Scrapers

WRECKING DOZERS

ALLIS-CHALMERS: Model “M”, HD5, HD6B,E, HD7W, HD7G, HDIIB, EP,

HD15-16, HD16DC, HD16DP, HD19-21, HD41B

FIAT: 451C, 555, 605, 50CI, 70CI, AT7C, 8B, BD10B, FD10E, BD20

FIATALLISM100C Justinfordismantling,Allis10,000series engine,wetengineclutch,transmissioningoodorder,Moldboard pitchcylinders,allpartsavailable,PhoneBrendan0267624466. S175.

HANOMAG/MASSEY: 2244, 200, 300, 3366, 400, 500, L400C, L600C, D600D Super, D700C

JOHN DEERE : 1010C, 850

LOADERS

ALLIS-CHALMERS: TL12D, TL14, TL20, 545, 605B, 645, 745B,C FIAT: FR20B LD3, LD5, LD7 & LD9 Scoopmobile

HANOMAG/MASSEY 22,33C,44, 55, CL55C,66C-D, 77 GRADERS

ALLIS-CHALMERS: D, DD, M65, 65B, AD30-40, 45, 145, M100A, B, FG95

DRMCO/CHAMPION 562, 600, 720, 740

JOHN DEERE 570, 570A, 670A, 770, 770A, 772A

FIATALLISHD16B Justinfordismantling,Standenrippers, immaculateundercarriageallround,bulltiltblade,fulllengthQLD canopy,17,000seriesAllisengine,powershift,segmented sprockets,allpartsavailable.PhoneBrendanorPeteon026762 4466.S174. TA1153541. POA

ALLISCHALMERSHD16DC Justinfordismantling,swiveltyne pacificrippers,nearnewlatestyleundercarriageallround,Allis 16,000engine,finaldrivesrebuilt,bulltiltblade,allpartsavailable, PhoneBrendanorPeteon0267624466.S173.

ALLIS WHEEL TRACTORS AC D17, D19, D21, XT190, 7000, 7010, 7020, 7040, 7060, 7080, 8010, 8050, 8070, 7580, 8550, 440 ALSO AVAILABLE Track Chains, Rollers, Idlers, Sprockets Various 4-1 Buckets, POA

ALLISCHALMERSHD11EP Justinfordismantling,hydraulicbulltilt blade,swiveltynerearrippers,turbo11,000seriesrunningengine, Powershifttransmissionandconverter,goodundercarriageall round,allpartsavailable,phoneBrendanon0267624466.S172.

SELL YOUR TRUCK

DUALAXLEPLANT/CAR/MULTI-PURPOSE 2023, multi-purpose/plant/car/tilttray low profile3.4tonne heavydutytrailer, S401-TKD. SA. DIY1177875. 0409 081 063. $15,000

4000mm,capacity-1250KN/135T,ser 1605146. NSW. DIY1175132. 0419 203 894. $27,500

MONITOR1380EP

2017,spiderlift,PB10008.NSW.

AKSELEMENTZMEMPAKDS-1

DCEDLM4.5.15

Vokes,seriesDLM15,dalamaticcaseddustextractor,typeDLM 4.5.15,4bank5tier,5tierfilers-6.2bar(90psig),priceincludes GST,8438-1.VIC. DIY1174407.

0411 825 720.

$22,000

2020,containerisedsewagetreatmentplant-30m3/day.Fully refurbished,MPAK40.VIC. DIY1175349.

0488 400 461.

$199,000

DONALDSON-TORITDB-3000 Downdraftbenchdustcollector,serial:IG752996-001,415 V, 3.0 KW,

2850RPM,3phase,50cycle.Self-containeddustcollector benchusedingrindingandfinishingoperations.Powerful downwardairfloweffectivelycapturesdustandfume ,IG752996-001.VIC. DIY1174413.

0411 825 720.

$16,500

DIY1174398.

0427 422 851. $64,500NoGSTPrivateSale

CECCATOCSA20 2016,15kw/20hprotaryscrewair compressorpackagewithairreceivertankand refrigerateddryer,SER CAI971147.NSW. DIY1175150. 0419 203 894. $12,100

METALMASTERHG-4006 2016,sheetmetal guillotine, 4000x6mmmildsteelshearingcapacity,ser 1611277. NSW. DIY1175136. 0419 203 894. $27,500

METALMASTERPB-135B 2016,Hafco.135tonnex