Bergen-Power Hardware Catalog 98H

BERGEN-POWER PIPE SUPPORTS

INDEX

Hardware Catalog 98H

Foreword Bergen-Power Pipe Supports is a complete line manufacturing and engineering organization offering pipe hangers, supports, restraints and specialty devices to support and control piping and equipment used in fossil power generating stations, petro-chemical plants, and other industrial processing piping systems.

In addition to our product line, representing one of the most complete in the industry, Bergen-Power provides complete engineering and technical services, including analysis, hanger design and detailing, and other construction support programs. To provide effective distribution of our products and services, engineering and sales offices are maintained in major cities throughout the continental United States.

This new catalog, illustrating our hardware product line, incorporates some design changes and expanded sizes in previous products along with additional concepts to meet current industry and code requirements.

General Notes Outline dimensions and data shown in this catalog are for reference only and are not intended for inspection purposes.

Designs and dimensions are subject to change without notice.

All hanger products shown herein are manufactured in accordance with industry standards and are for installation and service as described. When used for other purposes or in ways other than those for which designed and manufactured, Bergen-Power cannot be held responsible for product failure, injuries, or property damage.

Cataloged products meet requirements of MSS-SP-58 and MSS-SP-69.

Maximum rated loads for hangers are based on a safety factor applicable to the codes listed in this catalog or the allowable stresses specified in ASME B31.1, ASME B31.3, and MSS-SP-58.

INDEX BY FIGURE NUMBER Figure Page 91..................................................19 91Z ...............................................20 93..................................................12 93L ...............................................12 94..................................................13 94SS .............................................13 100................................................21 100EL...........................................22 100SS ...........................................21 113A...............................................3 113B ...............................................3 123................................................12 123W............................................12 124................................................23 125................................................24 126................................................25 132................................................14 133................................................13

Figure Page 133L .............................................13 134................................................26 137................................................27 160................................................11 165................................................14 175................................................28 175SP ...........................................28 194................................................29 220..................................................4 242A.............................................30 242B .............................................30 243A.............................................31 243B .............................................31 244A.............................................32 244B .............................................32 246................................................33 260..................................................5 276................................................15

Figure Page 276P .............................................15 279................................................16 279L .............................................16 283................................................34 297..................................................6 298................................................35 304................................................36 304Z .............................................37 351-357Z ................................38-41 371................................................42 1020................................................7 1022................................................8 1302................................................5 1308................................................9 1309..............................................10 5105..............................................17 5308..............................................18 7054..............................................11

BERGEN-POWER PIPE SUPPORTS

WELDED BEAM ATTACHMENT

T

S

Figure 113A Figure 113B

E

Figure 113A is recommended for attachment to the bottom of beams when little or no pipe movement is expected.

Figure 113B is recommended for attachment to the bottom of beams, when pipe movement is expected. A bolt & nut or pin is supplied. A pin with cotters is normally supplied for rod sizes over 1.

Compliance: Federal Specification WW-H-171 (Type 22), MSS SP-69 (Type 22) and BSPSS-BS3974.

Material: Carbon Steel.

Finish: Plain, Painted, Galvanized.

Ordering: Specify Figure No., rod size and finish. For Metric applications specify M113A or M113B.

C

ROD SIZE A FIG 113A B CL

E1

C R

S

CL H

T FIG 113B

FIGURE 113 – WELDED BEAM ATTACHMENT ROD SIZE 3 /8 M10 1 /2 M12 5/8 M16 3 /4 M20 7 /8 M20 1 M24 11/4 M30 11/2 M36 13/4 M42 2 M48 21/4 M56 21/2 M64 23/4 M72 3 M80 31/4 M80 31/2 M90

MAX LOAD 650° F 343° C 610 2714 1130 5027 1810 8052 2710 12055 3770 16770 4960 22064 8000 35587 11600 51601 15700 69840 20700 92082 27200 120996 33500 149021 41580 184964 50580 225000 71280 317082 71280 317082

BOLT OR PIN SIZE 1 /2 M12 5 /8 M16 3 /4 M20 7 /8 M20 1 M24 11/8 M30 13/8 M36 15/8 M42 17/8 M48 21/4 M56 21/2 M64 21/2 M64 3 M80X6 31/4 M80 31/2 M90X6 33/4 M90-6

B

C

2 51 2 51 2 51 23/4 70 21 / 2 64 3 76 4 102 5 127 5 127 6 152 6 152 6 152 6 152 7 178 7 178 7 178

27/8 73 27/8 73 27/8 73 31/8 79 41/4 108 41/2 114 5 127 51/2 140 73/4 197 81/4 210 93/4 248 93/4 248 93/4 248 101/4 260 111/2 292 12 305

ROD TAKEOUT FIG 113A FIG 113B E E1 17/8 2 48 51 13/4 2 44 51 13/4 2 44 51 11/8 2 29 51 25/8 3 67 76 3 3 1 /2 76 89 2 3 51 76 21/2 4 64 102 23/4 5 70 127 31/4 5 83 127 31/2 6 1 /4 89 159 31/2 6 1 /4 89 159 N/A 53 / 4 N/A 146 N/A 61 / 4 N/A 159 N/A 7 N/A 178 N/A 71 /2 N/A 191

H

R

S

T

9/16 14 11/16 17 13/16 21 15/16 24 11/8 29 11/4 32 11/2 38 13/4 44 2 51 23/8 60 25/8 67 27/8 73 31/8 79 33/8 86 35/8 92 37/8 98

7 /8 22 7 /8 22 7 /8 22 11/8 29 11/4 32 11/2 38 2 51 21/2 64 23/4 70 31/4 83 31/2 89 33/4 95 4 102 4 102 41/2 114 41/2 114

11/4 32 11/4 32 11/4 32 21/8 54 21/8 54 27/8 73 3 76 3 76 33/4 95 31/2 89 31/2 89 33/4 95 33/4 95 33/4 95 41/4 108 41/4 108

1 /4

6 1 /4

6 1 /4

6 3 /8

10 3 /8 10 1 /2 13 3 /4 19 3 /4 19 3 /4 19 1 /2 13 5 /8 16 5 /8 16 5 /8 16 5 /8 16 3 /4 19 3 /4 19

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

WEIGHT EACH FIG 113A FIG 113B W/O B&N W B&N 0.96 1.20 0.44 0.54 0.96 1.20 0.44 0.54 0.96 1.60 0.44 0.73 1.90 2.80 0.86 1.27 2.50 3.90 1.13 1.77 4.30 6.30 1.95 2.86 8.10 10.20 3.67 4.63 15.60 19.00 7.08 8.62 18.70 24.20 8.48 10.98 22.80 30.60 10.34 13.88 26.40 36.80 117.44 16.69 26.70 39.70 118.77 176.60 N/A 39.70 N/A 176.60 N/A 49.00 N/A 217.97 N/A 67.60 N/A 300.71 N/A 79.30 N/A 352.76 LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 3

BERGEN-POWER PIPE SUPPORTS

WELDING LUG

C

Figure 220 The Figure 220 is to be welded to the underside of structural members for the support of C Type Variable Springs, and with the Figure 276P Forged Steel Clevis with Pin. Material: Carbon Steel Ordering: Specify figure number, finish and size.

For Metric applications specify Figure M220.

C/2

G

E F D

H

FIGURE 220 – WELDING LUG ROD SIZE 1 /2 12 5 /8 16 3 /4 20 7 /8 20 1 24 11/4 30 11/2 36 13/4 42 2 48 21/4 56 21/2 64 23/4 72 3 80 31/4 80 31/2 90 33/4 100

BOLT OR MAXIMUM PIN SIZE LOAD 5 /8 1130 M16 5027 3 /4 1810 M20 8052 7 /8 2710 M20 12055 1 3770 M24 16770 11/8 4960 M30 22064 13/8 8000 M36 35587 15/8 11630 M42 51735 17/8 15700 M48 69840 21/4 20630 M56 91770 21/2 23000 M64 102313 23/4 30500 M72 135676 3 41600 M80 185053 31/4 50500 M80 224644 31/2 60500 M90 269128 33/4 71300 M100 317171 4 82900 M125 368772

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 4

LOADS POUNDS NEWTONS

C 21/2 64 21/2 64 21/2 64 21/2 64 3 76 4 102 5 127 5 127 6 152 6 152 8 203 8 203 8 203 9 229 9 229 9 229

WEIGHT POUNDS KILOGRAMS

D 11/4 32 11/4 32 11/4 32 11/4 32 11/2 38 2 51 21/2 64 21/2 64 3 76 3 76 4 102 4 102 4 102 41/2 114 41/2 114 5 127

E 3 76 3 76 3 76 3 76 3 76 4 102 41/2 114 41/2 114 41/2 114 41/2 114 41/2 114 41/2 114 5 127 5 127 6 152 6 152

F 41/4 108 41/4 108 41/4 108 41/4 108 41/2 114 6 152 7 178 7 178 71/2 191 71/2 191 81/2 216 81/2 216 9 229 91/2 241 101/2 267 11 279

G 1 /4 6 1 /4 6 3 /8 10 3 /8 10 1 /2 13 5 /8 16 3 /4 19 3 /4 19 3 /4 19 3 /4 19 1 25 1 25 1 25 1 25 11/2 38 13/4 44

H 11/16 17 13/16 21 15/16 24 11/8 29 11/4 32 11/2 38 13/4 44 2 51 23/8 60 25/8 67 27/8 73 31/8 79 33/8 86 35/8 92 37/8 98 41/8 105

WEIGHT EACH 0.75 0.34 0.68 0.31 1.00 0.45 0.98 0.44 1.60 0.73 3.70 1.68 6.40 2.90 6.30 2.86 7.20 3.27 7.60 3.45 15.50 7.03 15.10 6.85 16.00 7.26 18.90 8.57 31.30 14.20 35.90 16.28

BERGEN-POWER PIPE SUPPORTS

WASHER PLATE

FIGURE 260 – WASHER PLATE

Figure 260 This product to be welded to back to back channels or angles for supporting pipe with rods or U-Bolts.

Sufficient contact surface to the supporting structure must be made to develop maximum load capacity. Dimension “A” should not be exceeded.

Material: Carbon Steel.

Finish: Plain, Galvanized.

Ordering: Specify figure number, finish, and rod size.

For Metric applications specify Figure M260.

C

TYP.

D

B EXISTING

B/2 B/2

A (MAX.)

B

SELF DRILLING ANCHOR

ROD SIZE 3/8 M10 1/2 M12 5/8 M16 3/4 M20 7/8 M20 1 M24 11/8 M30 11/4 M30 11/2 M36 13/4 M42 2 M48 21/4 M56 21/2 M64 23/4 M72 3 M80 31/4 M80 31/2 M90 33/4 M95

MAX LOAD 610 2713 1130 5026 1810 8051 2710 12055 3770 16770 4960 22063 6230 27712 8000 35586 11630 51733 15700 69837 20700 92078 27200 120991 33500 149015 41580 184956 50580 224990 60480 269027 71280 317068 82890 368711

A 11/2 38 11/2 38 11/2 38 2 51 2 51 21/2 64 21/2 64 3 76 31/2 89 31/2 89 4 102 4 102 41/2 114 41/2 114 41/2 114 41/2 114 5 127 5 127

B 3 76 3 76 3 76 4 102 4 102 4 102 4 102 5 127 5 127 5 127 6 152 6 152 6 152 6 152 6 152 6 152 7 178 7 178

C 1/4 6 1/4 6 3/8 10 3/8 10 1/2 13 1/2 13 1/2 13 1/2 13 5/8 16 5/8 16 3/4 19 3/4 19 3/4 19 3/4 19 3/4 19 3/4 19 3/4 19 3/4 19

HOLE D 7/16 11 9/16 14 11/16 17 13/16 21 15/16 24 11/16 27 11/4 32 13/8 35 15/8 41 2 51 21/4 57 21/2 64 23/4 70 3 76 31/4 83 31/2 89 33/4 95 4 102

TL

WGT EACH 0.63 0.29 0.61 0.28 0.95 0.43 1.60 0.73 2.17 0.98 2.15 0.98 2.13 0.97 3.28 1.49 4.05 1.84 3.88 1.76 4.47 2.03 6.62 3.00 6.40 2.90 6.16 2.79 5.89 2.67 5.56 2.52 8.07 3.66 7.75 3.52

C

Figure 1302 The Figure 1302 is used for bolting components to concrete structures. The shell is fitted with a snap off chucking end for power drilling and shell expansion.

NOTE: This product is not designed or recommended for direct threading to hanger rods. Intermediate attachments are recommended.

WARNING: Recommended practice in sizing and application of concrete fasteners should be followed.

Material: Case hardened plated shell and expander plug.

Finish: Electro-Galvanized.

Ordering: Specify figure number and size. For Metric applications specify Figure M1302.

L

FIGURE 1302 – SELF DRILLING ANCHOR 3500 PSI CONCRETE SAFE WORKING TAP LOAD SIZE TENSION SHEAR 1/4 915 330 M6 4070 1468 3/8 1415 840 M10 6294 3737 1/2 2125 1680 M12 9453 7473 5/8 2925 2975 M16 13012 13234 3/4 4050 4050 M20 18016 18016 7/8 4460 4610 M20 19840 20507

C

L

TL

7/16 11 9/16 14 11/16 17 27/32 21 1 25 11/8 29

13/32 28 117/32 39 21/32 52 215/32 63 31/4 83 311/32 85

3/8 10 9/16 14 13/16 21 15/16 24 17/32 31 113/32 36

WGT EACH 0.05 0.02 0.10 0.05 0.17 0.08 0.32 0.15 0.56 0.25 0.72 0.33 5

BERGEN-POWER PIPE SUPPORTS BEAM FLANGE WIDTH

STEEL BEAM CLAMP WITH WELDLESS EYENUT Figure 297 The Figure 297 beam clamp with eyenut is used when welding to the structure is prohibited for supports where some movement is expected. The clamping effect is produced by the “ice tong” action of the arms and is locked in place by the through bolt located just under the beam flange.

Material: Carbon Steel with Forged Steel Eyenut.

Compliance: Federal Specification WW-H-171 (Type 4), MSS-SP-69 (Type 4) and BSPSS-BS3974 Finish: Plain, Galvanized.

Ordering: Specify figure number, rod size, clamp number and finish. For Metric applications specify Figure M297.

E

A

FIGURE 297 – STEEL BEAM CLAMP WITH WELDLESS EYENUT

CLAMP SIZE 1 2 3 4 5 6 7 8

MAXIMUM LOAD 2710 68834 4960 125984 4960 125984 4960 125984 4960 125984 11500 292100 11500 292100 11500 292100

MAXIMUM ROD SIZE A 3/4 M20 1 M24 1 M24 1 M24 1 M24 11/2 M36 11/2 M36 2 M48

BEAM WIDTH 3-8 76 - 203 3-8 76 - 203 4 - 11 102 - 279 4 - 12 102 - 305 11 - 15 279 - 381 4 - 12 102 - 305 11 - 15 279 - 381 4 - 12 102 - 305

** Based on the allowable stresses shown in ANSI Code for Pressure Piping

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 6

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

BODY SIZE A A B C D C D C

MAXIMUM FLANGE THICKNESS 0.6 15 0.6 15 0.6 15 1.03 26 1.03 26 1.03 26 1.03 26 1.03 26

WEIGHT EACH 5.5 2.5 5.5 2.5 9.0 4.1 29.0 13.2 33.3 15.1 29.0 13.2 33.3 15.1 29.0 13.2

BERGEN-POWER PIPE SUPPORTS

CONCRETE ATTACHMENT

CONFIGURATION TYPE 1 W

Figure 1020 The Figure 1020 Type 1 is for attaching support assemblies to concrete structures where little or no movement is anticipated. Used with a Fig 133 Threaded Rod or Figure 94 All Thread Rod. The Figure 1020 Type 2 is for attaching support assemblies to concrete structures where movement is anticipated. Used with a Fig 279 Weldless Eyenut or Figure 93 Welded Eyerod. A two-anchor pattern is used on sizes 3/8" thru 5/8" and all others use four anchors.

Material: Carbon Steel.

Finish: Plain.

Ordering: Specify figure number, finish, and rod size. For Metric applications specify Figure M1020 Type 1 or Type 2.

KW

J

T

J

J

KL

J

J

J

KL

J

E

2 ANCHOR DESIGN

4 ANCHOR DESIGN

CONFIGURATION TYPE 2 W

KW

J

T E1

2 ANCHOR DESIGN

4 ANCHOR DESIGN

FIGURE 1020 – CONCRETE ATTACHMENT ROD SIZE 3/8 M10 1/2 M12 5/8 M16 3 /4 M20 7 /8 M20 1 M24 11/4 M30 11/2 M36 13/4 M42 2 M48

MAX LOAD 610 2714 1130 5027 1810 8052 2710 12055 3770 16770 4960 22064 8000 35587 11630 51735 15700 69840 20700 92082

E

E1

H*

P

J

KL

KW

21/8 54 21/8 54 21/4 57 21/8 54 33/8 86 33/8 86 35/8 92 5 127 61/4 159 61/2 165

21/4 57 23/8 60 21/2 64 23/8 60 35/8 92 35/8 92 33/4 95 5 127 61/4 159 61/4 159

1/2 13 5/8 16 3/4 19 5/8 16 7/8 22 7/8 22 1 25 11/8 29 13/8 35 13/8 35

1/2 13 5/8 16 3/4 19 7/8 22 1 25 11/8 29 13/8 35 15/8 41 2 51 21/4 57

1 25 1 25 1 25 1 25 11/4 32 11/4 32 2 51 2 51 2 51 2 51

4 102 5 127 6 152 5 127 61/2 165 61/2 165 8 203 8 203 10 254 10 254

N/A N/A N/A N/A N/A N/A 5 127 7 165 7 165 8 203 8 203 10 254 10 254

5 127 5 127 5 127 5 127 5 127 6 152 6 152 6 152 7 178 7 178

T

W

1/4 6 3/8 10 1/2 13 3/8 10 5/8 16 5/8 16 3/4 19 1 25 11/4 32 11/4 32

4 102 4 102 4 102 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

WGT EACH W/PIN 2.8 1.3 4.1 1.9 5.8 2.6 7.7 3.5 19.8 9.0 19.8 9.0 41.0 18.6 60.0 27.2 93.6 42.5 100.0 45.4

WGT EACH W/O PIN 2.7 1.2 3.9 1.8 5.5 2.5 7.1 3.2 18.6 8.4 18.6 8.4 38.7 17.6 56.4 25.6 88.0 39.9 92.0 41.7

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

* Holes are 1/8" larger than recommended anchor bolt diameter to allow for installation tolerance.

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

7

BERGEN-POWER PIPE SUPPORTS

CONCRETE SINGLE LUG PLATE

L/2

L/2

TP

Figure 1022

E

The Figure 1022 is for attachment to a concrete structure where movement is anticipated. A two-anchor pattern is used on sizes 3/8" thru 5/8" and all others use four anchors.

Used with the Figure 276 Forged Steel Clevis and Type “C” variable springs.

Material Carbon Steel.

Finish: Plain.

Ordering: Specify figure number, finish, and rod size.

For Metric applications specify Figure M1022.

HL

R WL HP

J

TL WP

KW WP/2

KL

J

L TWO ANCHORS ONLY FOR SIZES 3/8" THRU 5/8"

FIGURE 1022 – CONCRETE SINGLE LUG PLATE ROD SIZE 3 /8 M10 1/2 M12 5/8 M16 3/4 M20 7/8 M20 1 M24 11/4 M30 11/2 M36 13/4 M42 2 M48

MAX LOAD 610 5027 1130 5027 1810 8052 2710 12055 3770 16770 4960 22064 8000 35587 11630 51735 15700 69840 20700 92082

E 13/4 44 17/8 48 2 51 21/4 57 3 76 3 76 4 102 41/4 108 41/2 114 51/4 133

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 8

HL 1 /2 13 5 /8 16 3 /4 19 7/8 22 1 25 11/8 29 13 / 8 35 15/8 41 17/8 48 21/4 57

LOADS POUNDS NEWTONS

HP 1/2 13 5/8 16 3/4 19 5/8 16 7/8 22 7/8 22 1 25 11/8 29 13/8 35 13/8 35

WEIGHT POUNDS KILOGRAMS

J 1 25 1 25 1 25 1 25 1 25 11/4 32 2 51 2 51 2 51 2 51

KL 4 102 5 127 6 152 5 127 61/2 165 8 203 8 203 8 203 8 203 8 203

KW 5 127 61/2 165 8 203 8 203 8 203 8 203 8 203

L 6 152 7 178 8 203 7 178 9 229 9 229 12 305 12 305 12 305 12 305

R 11/4 32 11/4 32 11/4 32 11/4 32 11/2 38 11/2 38 2 51 21/2 64 21/2 64 3 76

TP 1 /4 6 3 /8 10 1/2 13 1/2 13 3/4 19 3/4 19 1 25 1 25 11/4 32 11/4 32

TL 1 /4 6 1 /4 6 1 /4 6 3 /8 10 3 /8 10 1 /2 13 5/8 16 3/4 19 3/4 19 3/ 4 19

WP 4 102 4 102 4 102 7 178 9 229 9 229 12 305 12 305 12 305 12 305

WL 21/2 64 21/2 64 21/2 64 21/2 64 3 76 3 76 4 102 5 127 5 127 6 152

WGT EACH 11.6 5.3 11.6 5.3 11.6 5.3 12.0 5.4 22.0 10.0 31.9 14.5 43.8 19.9 45.6 20.7 55.7 25.3 58.2 26.4

BERGEN-POWER PIPE SUPPORTS FIGURE 1308 – HILTI KWIK-BOLT ANCHORS

HILTI® KWIK-BOLT ANCHORS Figure 1308 The Figure 1308 is used for bolting components to concrete structures. Allows for through drilling applications.

INSTALLATION: Drill holes the same diameter as the bolt an deeper than the required embedment. Drive the bolt into the hole so that at least six threads are below the top surface of the fixture. Tighten the nut with the washer in place. The resistance will increase after the third or fourth turn.

NOTE: Loads listed are based on a safety factor of four when installed in accordance with manufacturer’s recommendations. Contact us for higher loads are allowed due to increased embedment.

Material: High Tensile Steel. (Also available in Stainless Steel).

Finish: Zinc Plated.

Ordering: Specify figure number, diameter and length.

For Metric applications specify Figure M1308.

A

4000 PSI CONCRETE BOLT SAFE WORKING LOAD DIA. TENSION SHEAR 1/4 M6

365 1624

650 2891

3/8 M10

935 4159

590 2625

1/2 M12

1375 6117

2080 9253

5/8 M16

1650 7340

2900 12900

3/4 M20

2535 11277

4280 19039

1 M24

4000 17794

6700 29804

11/4 M30

5750 25578

8900 39591

E

L

L 13/4 44 21/4 57 31/4 83 21/4 57 3 76 33/4 95 5 127 23/4 70 33/4 95 41/2 114 51/2 140 33/4 95 43/4 121 6 152 7 178 43/4 121 51/2 140 7 178 8 203 6 152 9 229 9 229

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

D(Embd.)

TL

11/8 29

3/4 19

15/8 41

7/8 22 11/8 29 11/8 29 11/8 29

21/4 57

11/4 32

23/4 70

23/4 70

31/4 83

11/2 38

41/2 114

21/4 57

51/2 140

31/4 83

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 9

BERGEN-POWER PIPE SUPPORTS

RED HEAD® TRUBOLT WEDGE ANCHOR

4000 PSI CONCRETE SAFE WORKING BOLT LOAD DIA. TENSION SHEAR

Figure 1309 The Figure 1309 is used for bolting components to concrete structures. Allows for through drilling applications.

INSTALLATION: Drill holes the same diameter as the bolt an deeper than the required embedment. Drive the bolt into the hole so that at least six threads are below the top surface of the fixture. Tighten the nut with the washer in place. The resistance will increase after the third or fourth turn.

NOTE: Loads listed are based on a safety factor of four when installed in accordance with manufacturer’s recommendations. Contact us for higher loads are allowed due to increased embedment.

Material: High Tensile Steel. (Also available Galvanized or Stainless Steel).

Finish: Zinc Plated.

Ordering: Specify figure number, diameter and length.

For Metric applications specify Figure M1309.

A

L

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 10

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

1 /4

6

390 1735

450 2002

3 /8 10

805 3581

1000 4448

1 /2 13

1350 6005

1725 7673

5 /8 16

2000 8897

3120 13879

3/4 19

2500 11121

4500 20018

7/8 22

3400 15125

6300 28025

1 25

5200 23132

7100 31584

11/4 32

6800 30249

11000 48932

E

L 13/4 44 21/4 57 31/4 83 21/4 57 23/4 70 3 76 33/4 95 5 127 23/4 70 33/4 95 41/4 108 51/2 140 7 178 31/2 89 41/4 108 5 127 6 152 7 178 81/2 216 10 254 41/4 108 43/4 121 51/2 140 61/4 159 7 178 81/2 216 10 254 12 305 6 152 8 203 10 254 6 152 9 229 12 305 9 229 12 305

MAX THCKNSS MIN. OF MAT’L D(Embd) TO BE FASTENED 3 /8 10 7/ 8 11/8 29 22 17/8 48 3 /8 10 7/8 22 11/2 11/8 38 29 17/8 48 31/8 79 1 /8 3 1 25 21/4 11/2 57 38 23/4 70 41/4 108 1 /8 3 7/8 22 15/8 41 23/4 25/8 70 67 35/8 92 51/8 130 65/8 168 1/4 6 3 /4 19 11/2 38 21/4 57 31/4 3 83 76 41/2 114 6 159 8 203 13/8 35 33/4 33/8 95 86 53/8 137 1 /2 13 31/2 41 / 2 114 89 61/2 165 6 23/4 140 70 51/4 133

TL

11/8 29

11/2 38

21/4 57

23/4 70

11/2 38

21/2 64

21/2 64 31/2 89

BERGEN-POWER PIPE SUPPORTS

HORIZONTAL TRAVELER Figure 7054 Material: Carbon Steel with self lubricating bushings.

Finish: Plain.

Ordering: Specify figure number and size. For Metric applications specify Figure M7054.

The Figure 7054 is used to accommodate horizontal piping movement that exceeds the normal 4° misalignment limits.

It is to be welded all around to the building structural member. Each unit is compact, self-contained and ready for installation. The design minimizes friction and dust accumulation thus assuring proper functioning.

L

M

N D

E

H T

W

END PLATE OMITTED FOR CLARITY IN THIS VIEW

FIGURE 7054 – HORIZONTAL TRAVELER SIZE 1 2 3 4

MAX LOAD 3770 16770 6230 27714 11630 51735 20700 92082

D 53/8 137 77/8 200 101/2 267 121/2 318

E 41/8 105 6 152 8 203 91/2 241

H (Max.) 11/8 29 13/8 35 13/4 44 23/8 60

L 15 381 161/2 419 173/4 451 193/4 502

M 45/8 117 63/4 171 81/2 216 10 254

N 21/2 64 31/2 89 5 127 6 152

T 3/4 19 3/4 19 1 25 11/2 38

W 21/2 64 31/2 89 5 127 6 152

WEIGHT EACH 15 7 34 15 77 35 120 54

STANDARD HEX BOLT Figure 160 C

American Standard hex head bolts are stocked for immediate shipment in sizes 3/8" to 11/2" in various lengths. Length is measured from under the head to end.

Material: ASTM A-563 Grade A (Alloy and Stainless Steel grades are Available).

Finish: Plain, Electro-galvanized, Hot-Dip Galvanized.

Ordering: Specify figure number, finish and tap size.

For Metric applications specify M160.

H

D F L

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 11

BERGEN-POWER PIPE SUPPORTS

WELDED EYEROD Figure 93 (Right Hand Threads) Figure 93L (Left Hand Threads)

B

A

Welded Eyerods are designed to permit swing in the attachment component due to pipe movement.

Material: Carbon Steel. Larger rod diameters up to 21/2”, special materials, and special eye dimensions can be furnished upon request. See Fig 5308 for larger sizes.

Ordering: Specify figure number, finish, rod size, rod length, and thread length if other than standard. For Metric applications specify M93 or M93L.

TL SPECIFY

FIGURE 93, 93L – WELDED EYEROD A B THREAD LENGTH (TL) LOAD AT 650° F / 343° C

3/8

1/2

5/8

3/4

7/8

M10 3/4 19 3 76 610 2713

M12 7/8 22 3 76 1130 5026

M16 1 25 3 76 1810 8051

M20 11/8 29 3 76 2710 12055

M20 11/4 32 4 102 3770 16770

11/4 M30 15/8 41 4 102 8000 35586

1 M24 13/8 35 4 102 4960 22063

STEEL ROD COUPLING

11/2 M36 17/8 48 6 152 11630 51733

13/4 M42 21/2 64 6 152 15700 69837

A

Figure 123 Figure 123W Figure 123 is used to connect rods up to 11/2 inch diameter.

The Rod Coupling is made of carbon steel and can be welded to the rod after assembly. The Figure 123W has a sight hole mid length to allow for determining depth of thread engagement.

Ordering: Specify figure number, finish and rod size.

For Metric applications specify Figure M123 or M123W.

2 M48 23/4 70 6 152 20700 92078

21/4 M56 3 76 6 152 27200 120991

A

SIGHT HOLE L

L

FIGURE 123, 123W – ROD COUPLING ROD SIZE A 1/4 M6 3/8 M10 1/2 M12 5/8 M16 3/4 M20 7/8 M20 1 M24 11/4 M30 11/2 M36

MAXIMUM LOAD 240 1068 610 2714 1130 5027 1810 8052 2710 12055 3770 16770 4150 18461 6660 29626 7000 31139

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 12

LOADS POUNDS NEWTONS

L 7/8 22 13/4 44 13/4 44 21/8 54 21/4 57 21/4 57 23/4 70 31/4 83 4 102 WEIGHT POUNDS KILOGRAMS

WEIGHT EACH 0.02 0.01 0.08 0.04 0.12 0.05 0.17 0.08 0.28 0.13 0.44 0.20 0.72 0.33 1.41 0.64 1.96 0.89

21/2 M64 31/4 83 6 152 33500 149015

FIGURE 123

FIGURE 123W

BERGEN-POWER PIPE SUPPORTS FIGURE 94, 94SS – ALL-THREAD HANGER ROD

ALL-THREAD HANGER ROD Figure 94 Figure 94SS This product has a standard machine thread running its entire length. It is particularly useful when exact rod lengths are questionable.

Material: Figure 94 is made of carbon steel while Figure 94SS is available in either 304 or 316 stainless steel.

Available in precut six, ten, and twelve foot lengths. Can be cut to suit customer need upon request.

Finish: Plain, Electro-Galvanized, or Hot-Dip Galvanized Ordering: Specify figure number, finish, rod size, and length.

For Metric applications specify Figure M94 or M94SS. A

DIAMETER A 3/8 M10 1/2 M12 5/8 M16 3/4 M20 7/8 M20 1 M24 11/4 M30 11/2 M36

MAXIMUM LOAD 610 2714 1130 5027 1810 8052 2710 12055 3700 16459 4960 22064 8000 35587 11600 51601

WEIGHT PER FOOT 0.30 0.14 0.53 0.24 0.84 0.38 1.20 0.54 1.70 0.77 2.30 1.04 3.60 1.63 5.10 2.31

SPECIFY

FIGURE 133, 133L – MACHINE THREAD RODS

MACHINE THREAD RODS Figure 133 (Right Hand Threads Both Ends)

Figure 133L (Right Hand and Left Hand Thread) Furnished with UNC threads this product is made from carbon steel.

Maximum loads given are rated for up to 650° F (343° C).

Material: Carbon Steel (Stainless Steel is Available).

Finish: Plain, Electro-galvanized, Hot-Dip Galvanized.

Ordering: Specify material if other than carbon steel, figure number, finish, rod diameter, and length, and thread length if other than standard. For Metric applications specify M133 or M133L.

B

D

SPECIFY

A

D

DIAMETER A 3/8 M10 1/2 M12 5/8 M16 3/4 M20 7/8 M20 1 M24 11/4 M30 11/2 M36 13/4 M42 2 M48 21/4 M56 21/2 M64 23/4 M72 3 M80 31/4 M80 31/2 M90 33/4 M95 4 M100

THREAD LENGTH 3 76 3 76 3 76 3 76 4 102 4 102 4 102 6 152 6 152 6 152 6 152 6 152 6 152 6 152 6 152 6 152 6 152 6 152

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOAD AT 650° F / 343° C 610 2713 1130 5026 1810 8051 2710 12055 3770 16770 4960 22063 8000 35586 11630 51733 15700 69837 20700 92078 27200 120991 33500 149015 41580 184956 50580 224990 60480 269027 71280 317068 82890 368711 95400 424358 LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 13

BERGEN-POWER PIPE SUPPORTS

TURNBUCKLE

FIGURE 132 – TURNBUCKLE

A

Figure 132 The Figure 132 is used to connect right and left hand threaded rods together and provide for adjustment.

Material: Forged Steel.

Compliance: Federal Specification WW-H-171 (Type 15), MSS-SP 69 (Type 13), and BSPSS-BS3974.

Finish: Plain, Galvanized.

Ordering: Specify figure number, finish, and rod size.

For Metric applications specify M132.

B

3" ROD TAKE OUT

6"

HEAVY HEX NUT Material: ASTM A-563 Grade A (Alloy and Stainless Steel grades are available).

Finish: Plain, Electro-galvanized, Hot-Dip Galvanized.

Ordering: Specify figure number, finish and tap size.

For Metric applications specify M165.

T

W

F TAP

14

LOADS POUNDS NEWTONS

B 71/8 181 71/2 191 77/8 200 81 /4 210 85/8 219 9 229 91/8 232 93/4 248 103/8 264 11 279 127/8 327 131/2 343

WEIGHT EACH 0.30 0.14 0.60 0.27 1.00 0.45 1.20 0.54 1.90 0.86 2.50 1.13 3.80 1.72 5.70 2.59 8.20 3.72 14.20 6.44 27.00 12.25 33.00 14.97

FIGURE 165 – HEAVY HEX NUT

Figure 165

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

ROD SIZE A 3/8 M10 1/2 M12 5/8 M16 3/4 M20 7/8 M20 1 M24 11/4 M30 11/2 M36 13/4 M42 2 M48 21/4 M56 21/2 M64

MAXIMUM LOAD 650° F 343° C 610 2714 1130 5027 1810 8052 2710 12055 3370 14991 4960 22064 8000 35587 11630 51735 15700 69840 20700 92082 27200 120996 33500 149021

WEIGHT POUNDS KILOGRAMS

TAP SIZE 3/8 M10 1/2 M12 5/8 M16 3/4 M20 1 M24 11/4 M30 11/2 M36 13/4 M42 2 M48 21/4 M56 21/2 M64 23/4 M72 3 M80 31/4 M80 31/2 M90

MAX LOAD 610 2714 1130 5027 1810 8052 2710 12055 4960 22064 8000 35587 11630 51735 15700 69840 20700 92082 27200 120996 33500 149021 41580 184964 50580 225000 60480 269039 71280 317082

F 11/16 17 7/8 22 11/16 27 11/4 32 15/8 41 2 51 23/8 60 23/4 70 31/8 79 31/2 89 37/8 98 41/4 108 45/8 117 5 127 53/8 137

T 3/8 10 1/2 13 5/8 16 3/4 19 1 25 11/4 32 11/2 38 13/4 44 2 51 21/4 57 21/2 64 23/4 70 3 76 31/4 83 31/2 89

W 13/16 21 1 25 11/4 32 17/16 37 17/8 48 25/16 59 23/4 70 33/16 81 35/8 92 41/16 103 41/2 114 415/16 125 55/16 135 53/4 146 63/16 157

WGT EACH 0.031 0.014 0.065 0.030 0.119 0.054 0.193 0.088 0.425 0.193 0.786 0.357 1.310 0.594 2.040 0.925 2.990 1.356 4.190 1.901 5.640 2.558 7.380 3.348 9.500 4.309 11.940 5.416 15.260 6.922

BERGEN-POWER PIPE SUPPORTS

FORGED STEEL CLEVIS

TAP

Figure 276 Figure 276P N

The Figure 276 is used to connect rod ends with structural steel welding lug plates or lugs welded to pipe. It provides a pivot point and adjustment. It can be supplied with a pin as Fig 276P. Material: Forged Steel.

Compliance: Federal Specification WW-H-171 (Type 14), MSS-SP 69 (Type 14), and BSPSS-BS3974.

Finish: Plain, Galvanized.

Ordering: Specify figure number, rod size, pin size, grip “G” and finish. For Metric applications specify M276 or M276P.

W A

T

P

GRIP

D

FIGURE 276 – FORGED STEEL CLEVIS ROD SIZE 3 /8 M10 1 /2 M12 5 /8 M16 3 /4 M20 7 /8 M20 1 M24 11/4 M30 11/2 M36 13/4 M42 2 M48 21/4 M56 21/2 M64

MAX LOAD 650° F PIN/BOLT 343° C DIA. 1/2 610 2713 M12 5/8 1130 5026 M16 3/4 1810 8051 M20 7/8 2710 12055 M20 3770 1 16770 M24 4960 11/8 22063 M30 8000 1 3 /8 35586 M36 11630 15 / 8 51733 M42 15700 17/8 69837 M48 20700 21 / 4 92078 M56 27200 21 / 2 120991 M64 33500 23 / 4 149015 M72

SIZE NO. 2 48 2 48 2 48 21/2 64 21/2 64 3 80 3 80 31/2 90 4 100 5 125 6 150 6 150

A

D

N

P

T

W

33/4 95 33/4 95 33/4 95 4 102 4 102 5 127 5 127 6 152 6 152 7 178 8 203 8 203

11/2 38 11/2 38 11/2 38 21/2 64 21/2 64 3 76 3 76 31/2 89 4 102 5 127 6 152 6 152

5 /8 16 5 /8 16 5 /8 16 7 /8 22 7 /8 22 13/8 35 13/8 35 15/8 41 13/4 102 21/4 102 23/4 102 23/4 102

4 /7 14 1 /3 8 4 /5 21 1 24 11/8 29 11/4 32 11/2 38 13/4 44 2 51 23/8 60 2 5 /8 67 27/8 73

1 /3

1 25 1 25 1 25 11/4 32 11/4 32 11/2 38 11/2 38 13/4 44 2 51 21/2 64 3 76 3 76

WGT EACH 0.77 0.35 0.77 0.35 0.77 0.35 2.50 1.13 2.50 1.13 4.00 1.81 4.00 1.81 6.00 2.72 8.00 3.63 16.00 7.26 26.00 11.79 36.00 16.33

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

8 1 /3 8 1 /3 8 1 /3 8 1 /3 8 1 /2 13 1 /2 13 1 /2 13 1 /2 13 5 /8 16 3 /4 19 3/4

19

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

15

BERGEN-POWER PIPE SUPPORTS

FORGED WELDLESS EYENUT Figure 279 Figure 279L

B

A

The Figure 279 is used to connect rod ends with structural steel welded beam attachments or pipe clamps as a substitute for a welded eyerod. It provides a pivot point and adjustment.

It can also be supplied tapped left hand as Fig 279L. Material: Forged Steel.

Compliance: Federal Specification WW-H-171 (Type 17), MSS-SP 69 (Type 17), and BSPSS-BS3974.

Finish: Plain, Galvanized.

Ordering: Specify figure number, rod size and finish.

For Metric applications specify M279 or M279L.

C F E

D

CL

FIGURE 279 – WELDLESS EYENUT ROD TAP A 3 /8 M10 1 /2 M12 5 /8 M16 3 /4 M20 7/8 M20 1 M24 11/4 M30 11/2 M36 13/4 M42 2 M48 21/4 M56 21/2 M64

MAX LOAD 650° F / 343 °C 610 2714 1130 5027 1810 8052 2710 12055 3770 14991 4960 22064 8000 35587 11630 51735 15700 69840 20700 92082 27200 120996 33500 149021

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 16

LOADS POUNDS NEWTONS

B 1 /2 13 5 /8 16 3 /4 19 3 /4 19 1 25 11/8 29 11/4 32 11/4 32 21/4 57 21/4 57 21/4 57 21/4 57

WEIGHT POUNDS KILOGRAMS

C 3 /4 19 7/8 22 13/8 35 11/2 38 2 51 2 51 23/8 60 23/8 60 4 102 4 102 4 102 4 102

D 5/16 8 3 /8 10 1 /2 13 5 /8 16 3 /4 19 3 /4 19 1 25 1 25 11/2 38 11/2 38 11/2 38 11/2 38

E 11/4 32 11/2 38 17/8 48 21/2 64 21/2 64 21/2 64 33/8 86 33/8 86 61/4 159 61/4 159 61/4 159 61/4 159

F 1 25 1 25 1 25 1 25 13/8 35 13/4 44 13/4 44 13/4 44 31/4 83 31/4 83 31/4 83 31/4 83

WEIGHT EACH 0.20 0.09 0.31 0.14 0.55 0.25 1.00 0.45 1.55 0.70 2.45 1.11 3.75 1.70 6.75 3.06 16.40 7.44 16.75 7.60 16.75 7.60 16.75 7.60

BERGEN-POWER PIPE SUPPORTS

LOAD COUPLING Figure 5105 Material: Carbon Steel.

Compliance: Federal Specification WW-H-171 (Type 15), MSS-SP-69 (Type 13), and BSPSS-BS3974.

Finish: Plain, Electro-Galvanized.

Ordering: Specify figure number, gap, and rod size.

For Metric applications specify Figure M5105.

The Figure 5105 is used for adjustment of the support rods, similar to Figure 132, with up to 24" of adjustment.

It is furnished with right and left hand UNC threads.

Rated loads are for up to 650° F (343° C).

A

SIGHT HOLE TYP. E

D

GAP G

D

FIGURE 5105 – LOAD COUPLING ROD SIZE A 11/4 M30 11/2 M36 13/4 M42 2 M48 21/4 M56 21/2 M64 23/4 M72 3 M80 31/4 M80 31/2 M90 33/4 M95 4 100 41/4 108 41/2 114 43/4 120 5 127

MAXIMUM LOAD 8000 35587 11630 51735 15700 69840 20700 92082 27200 120996 33500 149021 41580 184964 50580 225000 60480 269039 71280 317082 82890 368728 95400 424377 109000 484875 123000 547153 138000 613879 154000 685053

D 25/8 67 25/8 67 25/8 67 35/8 92 35/8 92 35/8 92 41/4 108 41/4 108 41/4 108 51/4 133 51/4 133 51/4 133 51/4 133 61/2 165 61/2 165 61/2 165

E 2 51 23/8 60 23/4 70 31/8 79 31/2 89 37/8 98 41/4 108 45/8 117 5 127 53/8 137 53/4 146 61/8 156 61/2 165 67/8 175 71/4 184 75/8 194

6" 11 5 11 5 10 5 20 9 18 8 17 8 36 16 42 19 40 18 73 33 76 34 76 34 72 33 131 59 126 57 120 54

GAP OPENING “G” WEIGHT EACH 12" 18" 15 19 7 9 15 18 7 8 14 18 6 8 25 30 11 14 23 29 10 13 22 27 10 12 52 60 24 27 50 57 23 26 48 55 22 25 90 100 41 45 86 97 39 44 90 103 41 47 85 99 39 45 150 168 68 76 144 162 65 73 138 156 63 71

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

24" 23 10 22 10 21 10 35 16 34 15 32 15 67 30 65 29 63 29 111 50 107 49 117 53 112 51 186 84 180 82 174 79

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 17

BERGEN-POWER PIPE SUPPORTS

ROD WITH EYE W

Figure 5308

R

T 5°

The Figure 5308 provides eyerod capability for large diameter rods with heavy loads. Furnished with right hand UNC threading in sizes 23/4" to 5".

Rated loads are for up to 650° F (343° C).

Material: Carbon Steel.

Finish: Plain, Electro-Galvanized.

Ordering: Specify figure number and rod size. For Metric applications specify Figure M5308.

D

C H

L (MIN)

TL

A

FIGURE 5308 – ROD WITH EYE PIPE SIZE 23/4 M72 3 M80 31/4 M80 31/2 M90 33/4 M95 4 M100 41/4 M108 41/2 M114 43/4 M120 5 M127

MAX LOAD 41580 184964 50580 225000 60480 269039 71280 317082 82890 368728 90069 400663 95217 423563 123000 547153 138000 613879 154000 685053

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 18

C

D

H

L (MIN.)

R

T

TL

W

33/4 95 4 102 4 102 43/4 121 5 127 5 127 51/4 133 53/4 146 53/4 146 61/4 159

9 229 10 254 111/2 292 111/2 292 131/4 337 141/2 368 151/2 394 151/8 384 161/4 413 181/8 460

31/8 79 33/8 86 35/8 92 37/8 98 41/8 105 43/8 111 45/8 117 47/8 124 51/8 130 53/8 137

19 483 20 508 21 533 24 610 25 635 26 660 30 762 30 762 31 787 32 813

3 76 3 76 31/2 89 31/2 89 41/4 108 41/2 114 43/4 121 47/8 124 51/4 133 55/8 143

11/2 38 11/2 38 11/2 38 2 51 2 51 2 51 2 51 21/2 64 21/2 64 21/2 64

12 305 12 305 12 305 15 381 15 381 15 381 18 457 18 457 18 457 18 457

6 152 6 152 7 178 7 178 81/2 216 9 229 91/2 241 93/4 248 101/2 267 111/4 286

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

WGT EA. WGT PER AT MIN. FOOT OF LENGTH ADD’L ROD 35.9 20.2 16.3 9.2 42.9 24.0 19.5 10.9 54.7 28.2 24.8 12.8 67.3 32.7 30.5 14.8 80.0 37.6 36.3 17.1 97.0 42.7 44.0 19.4 127.0 48.2 57.6 21.9 131.0 54.1 59.4 24.5 154.0 60.3 69.9 27.4 175.0 66.8 79.4 30.3

BERGEN-POWER PIPE SUPPORTS

HEAVY DUTY THREE BOLT PIPE CLAMP

C F

Figure 91 The Figure 91 is designed to accommodate higher loads than the Figure 304 for insulated piping. The spacer on the top inner bolt provides uniform space for the connecting eyerod or weldless eyenut.

Rated loads are for up to 750° F (399° C).

Material: Carbon Steel.

Compliance: Federal Specification WW-H-171 (Type 3), MSS-SP-69 (Type 3), and BSPSS-BS3974.

Finish: Plain, Galvanized.

Ordering: Specify figure number, finish, and pipe size.

For Metric applications specify Figure M91.

D E

CL G STOCK SIZE

B

H

FIGURE 91 – HEAVY DUTY THREE BOLT PIPE CLAMP PIPE SIZE 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 30 750 36 900

MAXIMUM LOAD 650° F 750° F 343° C 399° C 3500 3125 15569 13901 4800 4285 21352 19061 5500 4910 24466 21842 7000 6250 31139 27802 9500 8485 42260 37745 10000 8930 44484 39724 13800 12325 61388 54827 15300 13665 68060 60787 16300 14555 72509 64746 20500 18300 91192 81406 28000 …….

124555 …….

B

C

D

43/4 121 6 152 71/4 184 87/8 225 10 254 107/8 276 121/2 318 131/2 343 16 406 197/8 505 245/8 625

13/4 44 2 51 21/4 57 21/2 64 21 / 2 64 3 76 31/2 89 31/2 89 31/2 89 41/4 108 41/2 114

101/4 260 113/8 289 131/8 333 147/8 378 155/8 397 171/8 435 193/4 502 203/4 527 231/4 591 323/4 832 401/4 1022

TAKE OUT E 9 229 101/8 257 113/8 289 127/8 327 135/8 346 147/8 378 171/4 438 181/4 464 201/4 514 281/4 718 343/4 883

F 1 M24 11/8 M30 11/4 M30 11/2 M36 11/2 M36 13/4 M42 2 M48 2 M48 2 M48 21/4 M56 23/4 M72

G

H

x 21/2 10 x 64 1/2 x 21/2 13 x 64 1/2 x 31/2 13 x 89 5 /8 x 4 16 x 102 3 /4 x 4 19 x 102 3 /4 x 5 19 x 127 1 x4 25 x 102 1 x5 25 x 127 1 x6 25 x 152 1 x8 25 x 203 11/2 x 8 38 x 203

6 152 71/4 184 9 229 107/8 276 12 305 131/8 333 15 381 16 406 19 483 243/8 619 301/8 765

WEIGHT EACH 14.26 6.47 22.20 10.07 35.10 15.92 58.09 26.35 71.31 32.35 105.77 47.98 153.73 69.73 176.40 80.02 237.02 107.51 388.37 176.16 678.00 307.54

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

3/8

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

19

BERGEN-POWER PIPE SUPPORTS

HEAVY ALLOY THREE BOLT PIPE CLAMP Figure 91Z

C

F

The Figure 91Z is designed to accommodate higher loads than the Figure 304Z for use on insulated alloy piping.

The spacer on the top inner bolt provides uniform space for the connecting eyerod or weldless eyenut.

Temperature range: Above 750° F (399° C) to 1050° F (566° C).

Material: Chrome Molybdenum Steel ASTM A-387 Grade 22.

Compliance: Federal Specification WW-H-171 (Type 3), MSS-SP-69 (Type 3), and BSPSS-BS3974.

Finish: Plain Ordering: Specify figure number, finish, and pipe size.

For Metric applications specify Figure M91Z.

D E

CL B

G STOCK SIZE

H

FIGURE 91Z – HEAVY ALLOY THREE BOLT PIPE CLAMP PIPE SIZE 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 30 750 36 900

MAXIMUM LOAD 950° F 1000° F 1050° F 510° C 538° C 566° C 7300 5200 3700 32473 23132 16459 7300 5200 3700 32473 23132 16459 10000 7200 5000 44484 32028 22242 10000 7200 5000 44484 32028 22242 11600 8300 6000 51601 36922 26690 11600 8300 6000 51601 36922 26690 11600 8300 6000 51601 36922 26690 15000 10600 7500 66726 47153 33363 15000 13000 9000 66726 57829 40036 15000 13000 9000 66726 57829 40036 15000 13000 9000 66726 57829 40036

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 20

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

B

C

D

E

F

G

H

5 1 /4 133 6 5 /8 168 77/8 200 93/8 238 97/8 251 11 279 12 305 131/2 343 153/4 400 19 483 22 559

13/4 44 13/4 44 2 51 2 51 21/4 57 21/4 57 21/4 57 21/4 57 21/4 57 21/4 57 21/4 57

11 279 12 305 14 356 15 381 161/4 413 171/4 438 181/4 464 201/2 521 23 584 28 711 31 787

9 229 10 254 12 305 13 330 14 356 15 381 16 406 18 457 20 508 25 635 28 711

11/2 M36 11/2 M36 13/4 M42 13/4 M42 17/8 M48 17/8 M48 17/8 M48 2 M48 2 M48 2 M48 2 M48

1 /2 x 4 13 x 102 1 /2 x 4 13 x 102 3 /4 x 4 19 x 102 3 /4 x 4 19 x 102 7/8 x 41/2 19 x 114 7/8 x 41/2 19 x 114 7/8 x 41/2 19 x 114 1 x5 25 x 127 11/8 x 6 29 x 152 11/4 x 6 32 x 152 11/4 x 6 32 x 152

7 178 81/2 216 10 254 111/4 286 12 305 13 330 14 356 151/2 394 18 457 211/2 546 241/2 622

WEIGHT EACH 28 13 33 15 53 24 65 29 88 40 95 43 103 47 142 64 213 97 300 136 340 154

BERGEN-POWER PIPE SUPPORTS

CLEVIS HANGER Figure 100 Figure 100SS

UPPER

Designed to support non-insulated, stationary lines from above allowing for approximately 1" to 11/2" of vertical adjustment after the pipe is in place. The lower nut (not furnished) adjusts the pipe line to the proper elevation, the top nut (not furnished) prevents loosening due to vibration, and must be tightened securely to assure proper hanger performance.

Hangers for 12" pipe size and larger are furnished with spreaders on the cross bolts.

Rated Loads are for up to 650° F (343° C).

Material: Carbon Steel (Also available in Stainless Steel as Figure 100SS).

Compliance: Federal Specification WW-H-171E Type 1, MSS-SP-69 (Type 1) and BSPSS-BS3974.

Finish: Plain, Galvanized, Plastic Coated.

Ordering: Specify figure number, finish and pipe size. For Metric applications specify Figure M100 OR M100SS.

A

B E C CL

LOWER

FIGURE 100 – CLEVIS HANGER PIPE SIZE 1 /2 15 3 /4 20 1 25 11/4 32 11/2 40 2 50 21/2 65 3 80 31/2 90 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 30 750 36 900

MAXIMUM LOAD 610 2714 610 2714 610 2714 610 2714 610 2714 610 2714 1130 5027 1130 5027 1130 5027 1430 6361 1430 6361 1940 8630 2000 8897 3600 16014 3800 16904 4200 18683 4800 21352 4800 21352 4800 21352 4800 21352 6000 26690 9500 42260

A 3/8 M10 3/8 M10 3/8 M10 3/8 M10 3/8 M10 3/8 M10 1 /2 M12 1 /2 M12 1 /2 M12 5/8 M16 5/8 M16 3 /4 M20 3 /4 M20 7 /8 M20 7 /8 M20 1 M24 1 M24 11 /4 M30 11 /4 M30 1 1 /4 M30 1 1 /4 M30 1 1 /2 M36

B 23/4 70 21/8 54 3 76 31/8 79 31/4 83 33/8 86 41/8 105 5 127 41/2 114 53/8 137 6 152 7 178 81/2 216 10 254 111/8 283 121/2 318 15 381 153/4 400 173/8 441 195/8 498 243/4 629 327/8 835

C 31/8 79 23/4 70 33/4 95 4 102 41/4 108 45/8 117 55/8 143 67/8 175 65/8 168 73/4 197 87/8 225 101/2 267 123/4 324 153/8 391 171/2 445 191/2 495 23 584 243/4 629 273/8 695 315/8 803 403/4 1035 507/8 1292

ROD TAKE OUT E 17/8 48 11/2 38 21/4 57 21/4 57 23/8 60 11/4 32 31/8 79 41/8 105 35/8 92 43/8 111 5 127 57/8 149 63/4 171 81/4 210 91/4 235 105/8 270 131/8 333 133/4 349 151/4 387 171/2 445 213/4 552 30 762

STEEL SIZE UPPER 11ga x 1 3 x 25 11ga x 1 3 x 25 11ga x 1 3 x 25 11ga x 1 3 x 25 11ga x 1 3 x 25 11ga x 1 3 x 25 7ga x 11/4 5 x 32 7ga x 11/4 5 x 32 7ga x 11/4 5 x 32 3ga x 11/4 6 x 32 3ga x 11/4 6 x 32 3ga x 11/4 6 x 32 1/4 x 13/4 6 x 44 3/8 x 13/4 10 x 44 3/8 x 2 10 x 51 1 /2 x 2 13 x 51 1/2 x 21/2 13 x 64 1/2 x 21/2 13 x 64 5/8 x 3 16 x 76 5/8 x 3 16 x 76 3 /4 x 3 19 x 76 3 /4 x 6 19 x 152

STEEL SIZE LOWER 11ga x 1 3 x 25 11ga x 1 3 x 25 11ga x 1 3 x 25 11ga x 1 3 x 25 11ga x 1 3 x 25 11ga x 1 3 x 25 7ga x 11/4 5 x 32 7ga x 11/4 5 x 32 7ga x 11/4 5 x 32 7ga x 11/4 5 x 32 7ga x 11/4 5 x 32 7ga x 11/2 4 x 38 3/16 x 13/4 5 x 44 1 /4 x 1 3 /4 6 x 44 1/4 x 2 6 x 51 1 /4 x 2 6 x 51 1/4 x 21/2 6 x 64 1/4 x 21/2 6 x 64 3/8 x 3 10 x 76 3/8 x 3 10 x 76 3/8 x 3 10 x 76 1 /2 x 6 13 x 152

WEIGHT EACH 0.27 0.12 0.29 0.13 0.33 0.15 0.36 0.16 0.42 0.19 0.52 0.24 0.61 0.28 0.90 0.41 0.99 0.45 1.40 0.64 2.10 0.95 3.00 1.36 5.25 2.38 9.10 4.13 11.75 5.33 14.25 6.46 20.75 9.41 23.00 10.43 41.50 18.82 50.00 22.68 68.08 30.88 68.68 31.15 21

BERGEN-POWER PIPE SUPPORTS

ELONGATED CLEVIS HANGER Figure 100EL

A

UPPER

The 100EL is designed for the suspension of insulated stationary pipe lines. Made of carbon steel it will accommodate 2 inches (51mm) of insulation up to 11/2" (40mm) pipe, and 4 inches (102mm) of insulation for pipe 21/2" (65mm) and larger.

Hanger locking nut above the clevis must be tightened securely to assure proper hanger performance. The nuts are not included.

Hangers for 18 inch (450mm) pipe and larger are furnished with spreaders on the cross bolts.

Rated Loads are for up to 650° F (343° C).

Approvals: Federal Specification WW-H-171 (Type 1), MSS-SP-69 (Type 1) and BSPSS-BS3974.

Ordering: Specify figure number, finish, and pipe size.

For Metric applications specify Figure M100EL.

F

G

B E C

CL

LOWER

FIGURE 100EL – ELONGATED CLEVIS HANGER PIPE SIZE 1/2 15 3/4 20 1 25 11/4 32 11/2 40 2 50 21/2 65 3 80 31/2 90 4 100 5 125 6 150 8 200 10 250 12 300

MAX LOAD 600 2669 600 2669 600 2669 600 2669 600 2669 600 2669 1100 4893 1100 4893 1100 4893 1400 6228 1400 6228 1900 8452 2000 8897 3600 16014 3800 16904

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 22

A 3/8 M10 3/8 M10 3/8 M10 3/8 M10 3/8 M10 3/8 M10 1/2 M12 1/2 M12 1/2 M12 5/8 M16 5/8 M16 3/4 M20 7/8 M20 7/8 M20 7/8 M20

B 33/4 95 41/4 108 51/8 130 53/8 137 51/2 140 75/8 194 77/8 200 81/8 206 83/8 213 95/8 244 103/8 264 107/8 276 125/8 321 131/4 337 153/4 400

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

C 41/4 108 47/8 124 53/4 146 61/8 156 63/8 162 83/4 222 91/4 235 97/8 251 103/8 264 117/8 302 131/8 333 141/8 359 167/8 429 185/8 562 221/8 562

E 31/2 89 37/8 98 43/4 121 47/8 124 5 127 71/8 181 71/4 184 71/2 191 73/4 197 87/8 225 95/8 244 10 254 115/8 295 121/8 308 145/8 371

F 5/8 16 5/8 16 15/8 41 15/8 41 11/2 38 15/8 41 11/8 29 11/8 29 11/4 32 13/4 44 17/8 48 15/8 41 21/8 54 23/8 60 25/8 67

STEEL SIZE UPPER 1/8 x 1 3 x 25 1/8 x 1 3 x 25 1/8 x 1 3 x 25 1/8 x 1 3 x 25 5/32 x 1 4 x 25 5/32 x 1 4 x 25 3/16 x 11/4 5 x 32 3/16 x 11/4 5 x 32 3/16 x 11/4 5 x 32 1/4 x 11/4 6 x 32 1/4 x 11/4 6 x 32 1/4 x 11/2 6 x 38 1/4 x 13/4 6 x 44 3/16 x 13/4 5 x 44 3/8 x 2 10 x 51

STEEL SIZE LOWER 1/8 x 1 3 x 25 1/8 x 1 3 x 25 1/8 x 1 3 x 25 1/8 x 1 3 x 25 1/8 x 1 3 x 25 1/8 x 1 3 x 25 3/16 x 11/4 5 x 32 3/16 x 11/4 5 x 32 3/16 x 11/4 5 x 32 3/16 x 11/4 5 x 32 3/16 x 11/4 5 x 32 3/16 x 11/2 5 x 38 3/16 x 13/4 5 x 44 1/4 x 13/4 6 x 44 1/4 x 2 6 x 51

WEIGHT EACH 0.66 0.30 0.70 0.32 0.74 0.34 0.78 0.35 0.81 0.37 0.88 0.40 1.83 0.83 1.97 0.89 2.06 0.93 2.57 1.17 3.00 1.36 4.05 1.84 6.00 2.72 10.10 4.58 12.90 5.85

BERGEN-POWER PIPE SUPPORTS

RISER CLAMP

F

S

Figure 124 This product is designed to support vertical piping by resting on shear lugs welded to the pipe. Shear lugs are not supplied.

The stated Maximum Loads are based upon the use of the clamp as a rigid support. Use of the clamp with springs units will double the given Maximum Loads. Rated loads are for up to 650° F (343° C).

Material: Carbon Steel.

Ordering: Specify figure number, finish, and pipe size.

For Metric applications specify Figure M124.

NOTE: For your Special Riser Clamp requirements that are not covered by this product, please contact us to discuss your application.

K G STOCK SIZE

F C

E

B CL C–C

FIGURE 124 – RISER CLAMP PIPE MAX SIZE LOAD A 2 900 11/4 50 4004 32 21/2 900 11/4 65 4004 32 3 1500 11/2 80 6673 38 4 2200 17/8 100 9786 48 3 /4 5 2200 125 9786 19 7 /8 6 3000 150 13345 22 7 /8 8 3000 200 13345 22 10 5500 11/4 250 24466 32 12 7800 13/8 300 34698 35 14 7800 13/8 350 34698 35 16 9000 11/2 400 40036 38 18 9000 11/2 450 40036 38 20 13500 17/8 500 60053 48 24 13500 17/8 600 60053 48

B 2 51 2 51 2 51 2 51 2 51 2 51 2 51 2 51 2 1 /2 64 2 1 /2 64 2 1 /2 64 2 1 /2 64 3 76 3 76

C 4 102 4 102

C-C 18 457 20 508 20 508 22 559 22 559 24 610 27 686 30 762 32 813 34 864 36 914 39 991 42 1067 45 1143

E 9 229 10 254 10 254 11 279 11 279 12 305 131/2 343 15 381 16 406 17 432 18 457 191/2 495 21 533 221/2 572

F 3 /8 M10 3 /8 M10 1 /2 M12 1 /2 M12 1 /2 M12 5 /8 M16 5 /8 M16 7 /8 M20 1 M24 1 M24 1 1 /8 M30 1 1 /8 M30 1 3 /8 M36 1 3 /8 M36

G 1/2 x 21/2 13 x 64 1/2 x 21/2 13 x 64 5/8 x 3 16 x 76 3/4 x 3 19 x 76 5/8 x 4 16 x 102 3/4 x 4 19 x 102 3/4 x 5 19 x 127 1 x6 25 x 152 1 x7 25 x 178 1 x7 25 x 178 11/4 x 6 32 x 152 11/4 x 7 32 x 178 11/2 x 8 38 x 203 11/2 x 8 38 x 203

K 3/16 5 11/16 27 13 / 8 35 17 / 8 48 23 / 8 60 213/16 71 313/16 97 4 5 /8 117 5 1 /2 140 6 1 /8 156 7 178 8 203 8 3 /4 222 103/4 273

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

S 3 /4 19 3 /4 19 3 /4 19 3 /4 19 3 /4 19 1 25 1 25 11/2 38 13/4 44 13/4 44 2 51 2 51 21/2 64 21/2 64

LOADS POUNDS NEWTONS

WEIGHT EACH 17.5 7.9 19.1 8.7 29.4 13.3 38.5 17.5 43.2 19.6 56.8 25.8 79.2 35.9 143.3 65.0 183.7 83.3 194.5 88.2 224.7 101.9 280.7 127.3 429.1 194.6 465.1 211.0

WEIGHT POUNDS KILOGRAMS 23

BERGEN-POWER PIPE SUPPORTS

PIPE STANCHION WITH U-BOLT Figure 125 The Figure 125 is used for support of piping from below without welding to the pipe.

Rated loads are for up to 650° F (343° C).

Material: Made from carbon steel, sizes 20 inch and larger are furnished with two U-bolts. The lower supporting pipe ‘A’ must be ordered separately.

Compliance: Federal Specification WW-H-171 (Type 38), MSS-SP-69 (Type 37), and BSPSS-BS3974 Finish: Plain, Galvanized Ordering: Specify figure number, finish, and pipe size. For Metric applications specify Figure M125.

CL E

C 4"

B D A DOUBLE U-BOLTS FOR 20" AND LARGER PIPE SIZES

FIGURE 125 – PIPE STANCHION WITH U-BOLT PIPE SIZE 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 30 750 36 900

MAXIMUM LOAD 1200 270 1200 270 1200 270 1200 270 1200 270 1200 270 1500 337 1750 393 2000 450 3500 787 3500 787 3500 787 3500 787

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 24

LOADS POUNDS NEWTONS

SUPPORT PIPE A 3 80 3 80 3 80 3 80 3 80 3 80 4 100 4 100 4 100 6 150 6 150 6 150 8 200

WEIGHT POUNDS KILOGRAMS

STEEL SIZE B 1/4 x 4 6 x 102 1/4 x 4 6 x 102 3/8 x 4 10 x 102 3/8 x 4 10 x 102 1/2 x 4 13 x 102 1/2 x 4 13 x 102 5/8 x 5 16 x 127 5/8 x 5 16 x 127 3/4 x 5 19 x 127 3/4 x 8 19 x 203 1 x8 25 x 203 1 x8 25 x 203 1 x 10 25 x 250

C 1/2 M12 1/2 M12 5/8 M16 5/8 M16 3/4 M20 7/8 M20 7/8 M20 7/8 M20 1 M24 (2)-1 (2)-M24 (2)-11/8 (2)-M30 (2)-11/8 (2)-M30 (2)-11/4 (2)-M30

STEM D 21/2 65 21/2 65 21/2 65 21/2 65 21/2 65 21/2 65 3 80 3 80 3 80 5 125 5 125 5 125 6 150

WEIGHT EACH 5.15 2.34 5.61 2.54 7.30 3.31 9.25 4.20 13.75 6.24 15.50 7.03 25.35 11.50 30.80 13.97 37.64 17.07 75.35 34.18 112.80 51.17 137.30 62.28 210.15 95.32

BERGEN-POWER PIPE SUPPORTS FIGURE 126 – EXTENSION RISER CLAMP

EXTENSION RISER CLAMP Figure 126 The Figure 126 is designed for the support or steadying of vertical pipe risers. It is made of carbon steel and is designed to hold tight to the pipe, transmitting the load to the structure through the ears on each end. When possible the clamp should be placed under a coupling, hub, or lugs welded to the pipe.

NOTE: This product is not designed to be supported with rods. Use our Figure 124 when hanger rods are required.

Approvals: Federal Specification WW-H-171 (Type 8), MSS-SP-69 (Type 8) and BSPSS-BS3974.

Ordering: Specify figure number, finish, and pipe size.

For Metric applications specify M126.

A 4"

4"

CL

PIPE SIZE 1 /2 15 3 /4 20 1 25 11/4 32 11/2 40 2 50 21/2 65 3 80 31/2 90 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600

MAX LOAD 255 1134 255 1134 255 1134 255 1134 255 1134 255 1134 390 1735 530 2358 670 2980 810 3603 1160 5160 1570 6984 2500 11121 2500 11121 2700 12011 2700 12011 2900 12900 2900 12900 2900 12900 2900 12900

A 9 229 87/8 225 87/8 225 10 254 101/4 260 101/4 6613 111/4 286 113/8 289 127/8 327 127/8 327 133/4 349 143/4 375 181/2 470 203/4 527 223/4 578 24 610 26 660 28 711 30 762 34 864

STEEL SIZE 3/16 x 11/4 5 x 32 3/16 x 1 5 x 25 3/16 x 1 5 x 25 3/16 x 1 5 x 25 3/16 x 1 5 x 25 3/16 x 1 5 x 25 1/4 x 1 6 x 25 1/4 x 1 6 x 25 1/4 x 1 6 x 25 1/4 x 1 6 x 25 1/4 x 11/2 6 x 38 1/4 x 11/2 6 x 38 3/8 x 11/2 10 x 38 3/8 x 2 10 x 51 1/2 x 2 13 x 51 1/2 x 2 13 x 51 5/8 x 21/2 16 x 64 5/8 x 21/2 16 x 64 5/8 x 21/2 16 x 64 5/8 x 3 16 x 76

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

BOLT SIZE 3/8 x 11/4 10 x 32 3/8 x 11/2 10 x 38 3/8 x 11/2 10 x 38 3/8 x 11/2 10 x 38 3/8 x 11/2 10 x 38 7/16 x 11/2 11 x 38 7/16 x 11/2 11 x 38 7/16 x 11/2 11 x 38 1/2 x 2 13 x 51 1/2 x 2 13 x 51 1/2 x 2 13 x 51 1/2x 2 13 x 51 5/8 x 2 16 x 51 5/8 x 21/2 16 x 64 5/8 x 21/2 16 x 64 5/8 x 3 16 x 76 3/4 x 3 19 x 76 3/4 x 3 19 x 76 3/4 x 31/2 19 x 89 11/8 x 4 29 x 102

LOADS POUNDS NEWTONS

WGT EACH 1.00 0.45 1.08 0.49 1.08 0.49 1.86 0.84 1.22 0.55 1.30 0.59 1.74 0.79 1.98 0.90 2.14 0.97 2.28 1.03 3.60 1.63 3.68 1.67 7.26 3.29 11.00 4.99 15.94 7.23 17.36 7.87 29.68 13.46 31.64 14.35 34.84 15.80 50.00 22.68

WEIGHT POUNDS KILOGRAMS 25

BERGEN-POWER PIPE SUPPORTS

STANDARD ALLOY YOKE CLAMP Figure 134 Material: Chrome molybdenum steel except U-bolt, which is stainless steel.

Compliance: Federal Specification WW-H-171 (Type 2), MSS-SP-69 (Type 2), and BSPSS-BS3974.

Finish: Plain.

Ordering: Specify figure number, pipe size, and finish.

For Metric applications specify Figure M134.

The Figure 134 is recommended for the suspension of high temperature piping that requires up to 4 inches of insulation. Normally used with a Figure 93 Welded Eyerod or Figure 279 Weldless Eyenut. An alloy load distribution strap is provided.

C F

A E D

CL

K

FIGURE 134 – STANDARD ALLOY YOKE CLAMP PIPE SIZE 4 100 6 150 8 200 10 250 12 300 14 350 16 400

750° F 399° C 3780 16815 6060 26957 6060 26957 9060 40302 12570 55916 12570 55916 12570 55916

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 26

MAXIMUM LOAD 950° F 1000° F 510° C 538° C 3300 2770 14680 12322 5290 4440 23532 19751 5290 4440 23532 19751 7910 6640 35187 29537 10980 9015 48843 40102 10980 9015 48843 40102 10980 9015 48843 40102

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

1050° F 566° C 1890 8407 3030 13479 3030 13479 4420 19662 6010 26735 6010 26735 6010 26735

C

D

11/8 29 11/2 38 11/2 38 11/2 38 2 51 2 51 2 51

37/8 98 51/2 140 63/4 171 83/8 213 101/8 257 111/8 283 121/4 311

TAKE OUT E 63/4 171 83/8 213 95/8 244 107/8 276 127/8 327 137/8 352 15 381

F

K

7/8 M20 1 M24 1 M24 11/8 M30 11/2 M36 11/2 M36 11/2 M36

61/2 165 91/8 232 111/8 283 135/8 346 161/8 410 173/8 441 195/8 498

WEIGHT EACH 4.0 1.8 7.5 3.4 9.0 4.1 15.8 7.2 24.3 11.0 26.3 11.9 31.0 14.1

BERGEN-POWER PIPE SUPPORTS

ADJUSTABLE PIPE SUPPORT Figure 137 Designed to support pipe from below, the Figure 137 is used in conjunction with flange or base mounted pipe column “B”. The stem is threaded its full length and furnished with an nut to allow for vertical adjustment. A hardened flat washer (not furnished) should be installed under the adjustment nut.

Rated Loads are for up to 650° F (343° C).

Material: Carbon Steel.

Finish: Plain, Electro-galvanized.

Ordering: Specify figure number, finish and pipe size.

For Metric applications specify M137.

CL

C

FIGURE 137 – ADJUSTABLE PIPE SUPPORT PIPE SIZE 1 25 11/2 40 2 50 21/2 65 3 80 31/2 90 4 100 5 125 6 160 8 200 10 250 12 300

A 5/8 M16 5/8 M16 5/8 M16 5/8 M16 5/8 M16 5/8 M16 7/8 M20 7/8 M20 1 M24 1 M24 11/4 M30 11/4 M30

B 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203 8 203

STEEL SIZE C 1/4 x 11/4 6 x 32 1/4 x 11/4 6 x 32 1/4 x 1 6 x 25 1/4 x 1 6 x 25 1/4 x 1 6 x 25 1/4 x 1 6 x 25 1/4 x 11/4 6 x 32 1/4 x 11/4 6 x 32 3/8 x 11/2 10 x 38 3/8 x 11/2 10 x 38 1/2 x 2 13 x 51 1/2 x 2 13 x 51

WEIGHT EACH 0.70 0.32 0.74 0.34 0.80 0.36 0.84 0.38 1.02 0.46 1.06 0.48 1.86 0.84 2.50 1.13 2.98 1.35 3.28 1.49 6.30 2.86 7.00 3.18

FLAT WASHER (NOT FURNISHED)

8"

SUPPORT PIPE "B"

A

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 27

BERGEN-POWER PIPE SUPPORTS

TWO BOLT PIPE CLAMP

Finish: Plain, Galvanized.

Ordering: Specify figure number, finish and pipe size.

Also, include any special requirements for Figure 175SP. For Metric applications specify Figure M175 or M175SP.

Figure 175 Figure 175SP Design to suspend cold or hot pipe lines where little or no insulation is required. The Figure 175 is usually used with a Figure 279 Weldless Eyenut, or Figure 93 Welded Eyerod.

See Figure 298 Heavy Duty Two Bolt Clamp where higher loads are required. We will also design to meet special requirements such as special pipe sizes, order Figure 175SP. Rated Loads are for up to 750° F (399° C).

Material: Carbon Steel.

Compliance: Federal Specification WW-H-171 (Type 4), MSS-SP-69 (Type 4) and BSPSS-BS3974.

C

F

E

D

CL G STOCK SIZE

D

E

FIGURE 175 – TWO BOLT PIPE CLAMP PIPE SIZE 1 /2 15 3 /4 20 1 25 11/4 32 11/2 40 2 50 21/2 65 3 80 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 30 750

MAXIMUM LOAD 650° F / 343° C 750° F / 343° C 500 445 2224 1980 500 445 2224 1980 500 445 2224 1980 500 445 2224 1980 800 715 3559 3181 1040 930 4626 4137 1040 930 4626 4137 1040 930 4626 4137 1040 930 4626 4137 1040 930 4626 4137 1615 1440 7184 6406 1615 1440 7184 6406 2490 2220 11077 9875 2490 2220 11077 9875 2490 2220 11077 9875 2490 2220 11077 9875 3060 2730 13612 12144 3060 2730 13612 12144 3060 2730 13612 12144 3500 3360 15569 14947

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 28

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

C 3 /8 10 3 /8 10 3 /8 10 3 /8 10 3 /8 10 1 /2 13 5 /8 16 5 /8 16 3 /4 19 3 /4 19 7 /8 22 1 25 1 25 1 25 11/8 29 11/8 29 11/4 32 13/8 35 11/2 38 2 51

ROD TAKE OUT D 11/8 29 11/4 32 13/8 35 15/8 41 13/4 44 21/8 54 25/8 67 3 76 35/8 92 41/4 108 61/4 159 73/8 187 83/4 222 101/4 260 105/8 270 115/8 295 13 330 141/8 359 167/8 429 203/4 527

E 15/8 41 13/4 44 17/8 48 21/8 54 21/4 57 25/8 67 31/8 79 31/2 89 43/8 111 5 127 51/4 133 63/8 162 75/8 194 83/4 222 91/4 235 101/4 260 115/8 295 123/4 324 151/4 387 181/2 470

F 3 /8 M10 3 /8 M10 3 /8 M10 3 /8 M10 3 /8 M10 1 /2 M12 1 /2 M12 1 /2 M12 1 /2 M12 1 /2 M12 3 /4 M20 3 /4 M20 7 /8 M20 7 /8 M20 7 /8 M20 7 /8 M20 1 M24 11/8 M30 11/4 M30 11/2 M36

G 1 /8 x 1 3 x 25 1 /8 x 1 3 x 25 1//8 x 1 3 x 25 1 /8 x 1 3 x 25 1 /8 x 1 3 x 25 1 /4 x 1 6 x 25 1 /4 x 1 6 x 25 1 /4 x 1 6 x 25 1/4 x 11/4 6 x 32 1/4 x 11/4 6 x 32 3/8 x 11/2 10 x 38 3/8 x 11/2 10 x 38 1 /2 x 2 13 x 51 1 /2 x 2 13 x 51 1/2 x 21/2 13 x 64 1/2 x 21/2 13 x 64 5/8 x 21/2 16 x 64 5/8 x 21/2 16 x 64 5 /8 x 3 16 x 76 3 /4 x 4 19 x 102

WEIGHT EACH 0.31 0.14 0.35 0.16 0.39 0.18 0.40 0.18 0.45 0.20 1.23 0.56 1.33 0.60 1.53 0.69 2.20 1.00 2.39 1.08 5.87 2.66 6.95 3.15 14.39 6.53 16.73 7.59 21.26 9.64 23.39 10.61 32.96 14.95 36.74 16.67 52.96 24.02 103.50 46.95

BERGEN-POWER PIPE SUPPORTS

ADJUSTABLE PIPE STANCHION WITH U-BOLT

D

Figure 191 The Figure 191 is used for support of piping from below without welding to the pipe with the added adjustment feature and a U-bolt for increased stability. The lower supporting pipe “B” must be ordered separately. A hardened flat washer (not furnished) should be used under the adjusting nut.

Rated loads are for up to 650° F (343° C).

Material: Carbon Steel.

Compliance: Federal Specification WW-H-171 (Type 38), MSS-SP-69 (Type 37), and BSPSS-BS3974.

Finish: Plain, Electro-Galvanized.

Ordering: Specify figure number, finish, and pipe size.

For Metric applications specify Figure M191.

F C E 8"

WASHER (NOT FURNISHED) "B" SUPPORT PIPE (NOT FURNISHED) A

FIGURE 191 – ADJUSTABLE PIPE STANCHION WITH U-BOLT PIPE SIZE 2 50 21/2 65 3 80 31/2 90 4 100 5 125 6 150 8 200 10 250 12 300

A 5 /8 M16 5 /8 M16 5 /8 M16 5 /8 M16 7 /8 M20 7 /8 M20 1 M24 1 M24 11/4 M30 11/4 M30

SUPPORT PIPE B 1 25 1 25 1 25 1 25 1 25 1 25 11/4 32 11/4 32 11/2 38 11/2 38

C 27/8 73 33/8 86 4 102 5 127 51/8 130 61/8 156 73/8 187 93/8 238 115/8 295 133/4 349

D 1 /4 6 3 /8 10 3 /8 10 3 /8 10 1 /2 13 1 /2 13 5 /8 16 5 /8 16 5 /8 16 5 /8 16

E 91/2 241 93/4 248 101/8 257 103/8 264 105/8 270 111/8 283 113/4 298 123/4 324 14 356 15 381

STEEL SIZE F 1 /4 x 1 6 x 25 1 /4 x 1 6 x 25 1 /4 x 1 6 x 25 1 /4 x 1 6 x 25 1/4 x 11/4 6 x 32 1/4 x 11/4 6 x 32 3/8 x 11/2 10 x 38 3/8 x 11/2 10 x 38 1 /2 x 2 13 x 51 1 /2 x 2 13 x 51

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT EACH 1.2 0.5 1.4 0.6 1.6 0.7 2.6 1.2 3.0 1.4 3.2 1.5 4.9 2.2 6.2 2.8 10.5 4.8 11.8 5.4

WEIGHT POUNDS KILOGRAMS 29

BERGEN-POWER PIPE SUPPORTS

PIPE STRAPS Figure 242A, 242B Material: Carbon Steel.

Finish: Plain.

Ordering: Specify figure number, and pipe size.

For Metric applications, specify Figure M242A or M242B.

The Figure 242 is designed to restrain piping laterally while permitting movement in the axial and vertical direction.

Fig 242A is a welded design and Figure 242B is bolted.

Larger sizes are available upon request.

Rated loads are for up to 650° F (343° C).

Pv 1/16

Pv

1/16

X

T

T A

A

C–C

BOLT ø + 1/16"

W

W

FIGURE 242A

FIGURE 242B

FIGURE 242A, 242B – PIPE STRAPS PIPE SIZE 1/2 15 3/4 20 1 25 11/4 32 11/2 40 2 50 21/2 65 3 80 4 100 6 M48

MAX LOAD PL 125 556 125 556 125 556 300 1335 300 1335 300 1335 450 2002 450 2002 450 2002 500 2224

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 30

BOLT SIZE 3/4 M20 3/4 M20 3/4 M20 3/4 M20 3/4 M20 3/4 M20 7/8 M20 7/8 M20 7/8 M20 7/8 M20

A

B

C

E

F

G

1 25 13/16 30 17/16 37 13/4 44 2 51 21/2 64 3 76 39/16 90 49/16 116 6 3/4 171

2 51 2 51 2 51 3 76 3 76 3 76 3 76 4 102 4 102 6 152

4 102 43/16 106 47/16 113 43/4 121 5 127 51/2 140 63/4 171 75/16 186 85/16 211 101/2 267

3 76 3 76 31/4 83 31/2 89 4 102 41/2 114 5 127 51/2 140 61/2 165 81/2 216

1/4

3 76 3 76 3 76 3 76 3 76 3 76 33/4 95 33/4 95 33/4 95 33/4 95

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

6 1/4 6 1/4 6 3/8 10 3/8 10 3/8 10 1/2 13 1/2 13 1/2 13 1/2 13

WEIGHT EACH 242A 242B 1.06 1.77 0.48 0.80 1.09 1.80 0.49 0.82 1.20 1.90 0.54 0.86 3.03 4.46 1.37 2.02 3.43 4.86 1.55 2.20 3.90 5.34 1.77 2.42 5.95 8.29 2.70 3.76 8.82 11.93 4.00 5.41 10.52 13.63 4.77 6.18 21.04 25.71 9.54 11.66

BERGEN-POWER PIPE SUPPORTS

PIPE STRAPS Figure 243A, 243B Material: Carbon Steel.

Finish: Plain.

Ordering: Specify figure number, and pipe size.

For Metric applications, specify Figure M243A or M243B.

The Figure 243 is designed to restrain piping vertically while permitting movement in the axial and lateral directions. Fig 243A is a welded design and Figure 243B is bolted. Larger sizes are available upon request.

Rated loads are for up to 650° F (343° C).

Pv

Pv

X

1/16

1/16

T

T A

A C–C

W

W

BOLT ø + 1/16"

FIGURE 243A, 243B – PIPE STRAPS PIPE SIZE 1/2 15 3/4 20 1 25 11/4 32 11/2 40 2 50 21/2 65 3 80 4 100 6 150

MAX LOAD PL 600 2669 600 2669 600 2669 1500 6673 1500 6673 1500 6673 2500 11121 2800 12456 2800 12456 3000 13345

BOLT SIZE 3/4 M20 3/4 M20 3/4 M20 3/4 M20 3/4 M20 3/4 M20 7/8 M20 7/8 M20 7/8 M20 7/8 M20

A

B

C-C

T

W

X

3 76 31/2 89 4 102 41/2 114 5 127 51/2 140 6 152 61/2 165 71/2 191 93/4 248

15/16

6 152 61/2 165 7 178 71/2 191 8 203 81/2 216 9 229 101/2 267 111/2 292 153/4 400

1/4

2 51 2 51 2 51 3 76 3 76 3 76 3 76 4 102 4 102 6 152

3 76 3 76 3 76 3 76 3 76 3 76 33/4 95 33/4 95 33/4 95 33/4 95

24 11/8 29 13/8 35 13/4 44 2 51 27/16 62 215/16 75 39/16 90 49/16 116 611/16 170

6 1/4 6 1/4 6 3/8 10 3/8 10 3/8 10 1/2 13 1/2 13 1/2 13 1/2 13

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

WEIGHT EACH 243A 243B 0.76 1.47 0.35 0.67 0.89 1.59 0.40 0.72 1.03 1.74 0.47 0.79 2.79 4.22 1.26 1.92 3.11 4.54 1.41 2.06 3.55 4.98 1.61 2.26 5.47 7.81 2.48 3.54 8.29 11.40 3.76 5.17 9.99 13.10 4.53 5.94 20.50 25.18 9.30 11.42 LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 31

BERGEN-POWER PIPE SUPPORTS

PIPE STRAPS Figure 244A, 244B Material: Carbon Steel.

Finish: Plain.

Ordering: Specify figure number, and pipe size.

For Metric applications, specify Figure M244A or M244B.

The Figure 244 is designed to restrain piping vertically and laterally while permitting movement in the axial direction. Fig 244A is a welded design and Figure 244B is bolted. Larger sizes are available upon request.

Rated loads are for up to 650° F (343° C).

Pv

Pv X

1/16

PL

1/16

PL

PL

PL

T

T

A

A

C–C

W

W

FIGURE 244A

FIGURE 244B

BOLT ø + 1/16"

FIGURE 244A, 244B – PIPE STRAPS PIPE SIZE 1/2 15 3/4 20 1 25 11/4 32 11/2 40 2 50 21/2 65 3 80 4 100 6 M48

MAX LOAD PL 250 1112 250 1112 250 1112 500 2224 500 2224 500 2224 650 2891 650 2891 650 2891 700 3114

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 32

MAX LOAD PV 1500 6673 1500 6673 1500 6673 2000 8897 2000 8897 2000 8897 2300 10231 2300 10231 2300 10231 2300 10231

BOLT SIZE 3/4 M20 3/4 M20 3/4 M20 3/4 M20 3/4 M20 3/4 M20 7/8 M20 7/8 M20 7/8 M20 7/8 M20

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

A

C-C

T

W

X

1 25 13/16 30 17/16 37 13/4 44 2 51 21/2 64 3 76 39/16 90 49/16 116 63/4 171

4 102 43/16 106 47/16 113 43/4 121 5 127 51/2 140 63/4 171 75/16 186 85/16 211 101/2 267

1/4

2 51 2 51 2 51 3 76 3 76 3 76 3 76 4 102 4 102 6 152

3 76 3 76 3 76 3 76 3 76 3 76 33/4 95 33/4 95 33/4 95 33/4 95

6 1/4 6 1/4 6 3/8 10 3/8 10 3/8 10 1/2 13 1/2 13 1/2 13 1/2 13

WEIGHT EACH 244A 244B 0.46 1.10 0.21 0.50 0.51 1.20 0.23 0.54 0.58 1.20 0.27 0.54 0.96 1.60 0.44 0.73 1.90 2.80 0.86 1.27 2.50 3.90 1.13 1.77 4.30 6.30 1.95 2.86 8.10 10.20 3.67 4.63 15.60 19.00 7.08 8.62 22.80 30.60 10.34 13.88

BERGEN-POWER PIPE SUPPORTS

HEAVY DUTY ALLOY YOKE CLAMP Figure 246 Material: Chrome molybdenum steel except U-bolt, which is stainless steel.

Compliance: Federal Specification WW-H-171 (Type 2), MSS-SP-69 (Type 2), and BSPSS-BS3974.

Finish: Plain.

Ordering: Specify figure number, pipe exact O.D., and finish. For Metric applications specify Figure M246.

The Figure 246 is recommended for the suspension of heavy loads on high temperature piping that requires up to 6 inches of insulation. Normally used with a Figure 93 Welded Eyerod or Figure 279 Weldless Eyenut. An alloy load distribution strap is provided.

C F

A E D

CL

3" K

FIGURE 246 – HEAVY DUTY ALLOY YOKE CLAMP PIPE SIZE

USED ON O.D. PIPE SIZE

10 250 12 300 14 350 16 400 18 450 20 500 24 600

83/4 - 1013/16 222 - 275 107/8 - 1213/16 276 - 325 127/8 - 141/16 327 - 357 141/8 - 161/16 359 - 408 161/8 - 181/16 410 - 459 181/8 - 201/16 460 - 510 201/8 - 241/16 511 - 611

OPERATING TEMPERATURE 950° F 1000° F 1050° F 1075° F 510° C 538° C 566° C 579° C MAXIMUM RECOMMENDED LOAD 13500 11780 7850 6120 60053 52402 34920 27224 16500 14910 9940 7750 73399 66326 44217 34475 16500 14910 9940 7750 73399 66326 44217 34475 16500 14910 9940 7750 73399 66326 44217 34475 19000 18410 12270 9570 84520 81895 54582 42571 19000 18410 12270 9570 84520 81895 54582 42571 25000 22280 14850 11580 111210 99110 66059 51512

C

D

E

F

K

WEIGHT EACH

2 51 21/4 57 21/4 57 21/4 57 21/2 64 21/2 64 3 76

91/8 232 103/4 273 111/2 292 131/8 333 141/2 368 153/4 400 181/4 464

12 305 133/4 349 141/2 368 163/8 416 181/4 464 191/2 495 22 559

11/2 M36 15/8 M42 15/8 M42 15/8 M42 2 M48 2 M48 21/4 M56

153/8 391 177/8 454 191/8 486 211/8 537 241/8 613 261/8 664 303/4 781

42.0 19.1 58.0 26.3 63.0 28.6 69.0 31.3 94.0 42.6 104.0 47.2 167.0 75.8

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 33

BERGEN-POWER PIPE SUPPORTS

STANDARD U-BOLT

CL

Figure 283

CL C

The Figure 283 is recommended for use as a support or guide for piping. It is supplied with four hex nuts to allow use as a guide. Special U-Bolts can be fabricated to your requirements.

NOTE: Tack weld a 1/4" thick spacer between the pipe and structure is required when using sizes 1/2" to 11/2" as a guide.

Material: Carbon Steel Compliance: Federal Specification WW-H-171 (Type 24), MSS-SP 69 (Type 24), and BSPSS-BS3974.

Finish: Plain, Galvanized.

NOTE: When finished, galvanized oversized hex nuts must be used.

Ordering: Specify figure number, rod size and finish. For Metric applications specify M283.

E

B

D

FIGURE 283 – STANDARD U-BOLT PIPE SIZE 1 /2 15 3 /4 20 1 25 1 /2 15 3 /4 20 1 25 11/4 32 11/2 40 2 50 21/2 65 3 80 31/2 90 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 28 700 30 750 36 900 34

MAX LOAD STOCK SIZE 650° F / 343 °C A 1 /4 480 2135 M6 1 /4 480 2135 M6 1 /4 480 2135 M6 3 /8 480 2135 M10 3 /8 480 2135 M10 3 /8 480 2135 M10 3 /8 1200 5338 M10 3 /8 1200 5338 M10 3 /8 1200 5338 M10 1 /2 2200 9786 M12 1 /2 2200 9786 M12 1 /2 2200 9786 M12 1 /2 2200 9786 M12 1 /2 2200 9786 M12 5 /8 3600 16014 M16 5 /8 3600 16014 M16 3 /4 5400 24021 M20 7 /8 7500 33363 M20 7 /8 7500 33363 M20 7 /8 7500 33363 M20 9900 1 44039 M24 9900 1 44039 M24 9900 1 44039 M24 9900 1 44039 M24 9900 1 44039 M24 9900 1 44039 M24

B 13/8 35 11/8 29 13/8 35 13/8 35 11/8 29 13/8 35 13/4 44 2 51 21/2 64 3 76 35/8 92 41/8 105 45/8 117 55/8 143 63/4 171 83/4 222 107/8 276 127/8 327 141/8 359 161/8 410 181/8 460 201/8 511 241/8 613 281/8 714 301/8 765 361/8 918

C 11/8 29 13/8 35 15/8 41 11/4 32 11/2 38 13/4 44 21/8 54 23/8 60 27/8 73 31/2 89 41/8 105 45/8 117 51/8 130 61/8 156 73/8 187 93/8 238 115/8 295 133/4 349 15 381 17 432 191/8 486 211/8 537 251/8 638 291/8 740 311/8 791 371/8 943

D 23/4 70 23/4 70 23/4 70 23/4 70 23/4 70 23/4 70 27/8 73 3 76 31/4 83 33/4 95 4 102 41/2 114 41/2 114 5 127 61/8 156 71/8 181 83/8 213 95/8 244 101/4 260 111/4 286 125/8 321 135/8 346 155/8 397 175/8 448 185/8 473 215/8 549

E 21/8 54 21/8 54 21/8 54 21/8 54 21/8 54 21/8 54 21/8 54 21/2 64 21/2 64 3 76 3 76 3 76 3 76 3 76 33/4 95 33/4 95 4 102 41/4 108 41/4 108 41/4 108 43/4 121 43/4 121 43/4 121 43/4 121 43/4 121 43/4 121

WEIGHT EACH 11 5 12 5 12 5 16 7 16 7 19 9 28 13 30 14 33 15 70 32 78 35 84 38 90 41 104 47 200 91 230 104 490 222 770 349 830 376 920 417 1350 612 1460 662 1690 767 1800 816 1910 866 2320 1052

A

BERGEN-POWER PIPE SUPPORTS

HEAVY DUTY TWO BOLT PIPE CLAMP Figure 298

C

Design to suspend heavy loads on cold or hot pipe lines where little or no insulation is required. The Figure 298 is usually used with a Figure 279 Weldless Eyenut or Figure 93 Welded Eyerod.

Rated Loads are for up to 750° F (399° C).

Material: Carbon Steel.

Compliance: Federal Specification WW-H-171 (Type 4), MSS-SP-69 (Type 4) and BSPSS-BS3974.

Finish: Plain, Galvanized.

Ordering: Specify figure number, finish and pipe size.

For Metric applications specify Figure M298.

D

E

F

B

G STOCK SIZE

H

FIGURE 298 – HEAVY DUTY TWO BOLT PIPE CLAMP PIPE SIZE 2 50 3 80 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 30 750 36 900

MAX LOAD 650° F 750° F 343° C 399° C 3400 3000 15125 13345 3550 3150 15792 14012 3550 3150 15792 14012 3550 3150 15792 14012 4900 4350 21797 19351 4900 4350 21797 19351 6000 5400 26690 24021 8700 7750 38701 34475 9150 8150 40703 36254 9150 8150 40703 36254 13800 12280 61388 54626 15300 13620 68060 60587 16300 14500 72509 64502 20500 18250 91192 81183 28000 24900 124555 110765

B

C

D

E

F

2 51 31/8 79 33/4 95 43/8 111 53/8 137 63/4 171 75/8 194 91/4 235 93/4 248 11 279 141/2 368 16 406 181/2 470 221/2 572 261/2 673

3/4 19 1 25 1 25 1 25 11/8 29 11/8 29 11/4 32 15/8 41 15/8 41 15/8 41 3 76 3 76 31/4 83 31/2 89 31/2 89

3 76 4 102 47/8 124 51/2 140 63/4 171 81/8 206 91/8 232 113/8 289 117/8 302 127/8 327 171/4 438 183/4 476 211/2 546 26 660 301/4 768

2 51 31/8 79 33/4 95 43/8 111 53/8 137 63/4 171 73/4 197 91/2 241 10 254 11 279 141/2 368 16 406 181/2 470 221/2 572 261/2 673

5/8 M16 3/4 M20 7/8 M20 7/8 M20 1 M24 1 M24 11/4 M30 11/2 M36 11/2 M36 11/2 M36 2 M48 2 M48 21/4 M56 21/2 M64 23/4 M72

STOCK SIZE G 1/4 x 11/2 6 x 38 1/4 x 2 6 x 51 3/8 x 2 10 x 51 3/8 x 2 10 x 51 1/2 x 21/2 13 x 64 1/2 x 21/2 13 x 64 5/8 x 21/2 16 x 64 3/4 x 3 19 x 76 3/4 x 4 19 x 102 3/4 x 4 19 x 102 3/4 x 6 19 x 152 1 x5 25 x 127 1 x6 25 x 152 11/4 x 7 32 x 178 11/2 x 8 38 x 203

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

H 3 76 4 102 47/8 124 51/2 140 63/4 171 81/8 206 9 229 111/8 283 115/8 295 127/8 327 171/4 438 183/4 476 211/2 546 26 660 301/4 768

WGT EACH 2.1 1.0 3.8 1.7 6.5 2.9 7.4 3.4 14.0 6.4 16.4 7.4 25.3 11.5 44.1 20.0 58.8 26.7 64.1 29.1 126.3 57.3 150.0 68.0 210.5 95.5 365.4 165.7 575.1 260.9

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS 35

BERGEN-POWER PIPE SUPPORTS

THREE BOLT PIPE CLAMP Figure 304 The Figure 304 is designed for hot insulated pipe lines up to 750° F. The spacer on the top inner bolt provides uniform space for the connecting eyerod or weldless eyenut. See Figure 91 for higher load ratings. We will also, design to meet special requirements such as special pipe sizes, order Figure 304SP. Rated Loads are for up to 750° F (399° C).

Material: Carbon Steel.

Compliance: Federal Specification WW-H-171 (Type 3), MSS-SP-69 (Type 3) and BSPSS-BS3974.

Finish: Plain.

Ordering: Specify figure number, and pipe size. Also, include any special requirements for Figure 304SP. For Metric applications specify Figure M304 or M304SP.

C

F

D E

CL G STOCK SIZE

B

H

FIGURE 304 – THREE BOLT PIPE CLAMP PIPE SIZE 1/2 15 3/4 20 1 25 11/4 32 11/2 40 2 50 21/2 65 3 80 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 30 750 36 900 36

MAXIMUM LOAD 650° F 750° F 343° C 399° C 950 845 4226 3759 950 845 4226 3759 950 845 4226 3759 950 845 4226 3759 1545 1380 6873 6139 1545 1380 6873 6139 1545 1380 6873 6139 1545 1380 6873 6139 2500 2230 11121 9920 2500 2230 11121 9920 2865 2555 12745 11366 2865 2555 12745 11366 3240 2890 14413 12856 3240 2890 14413 12856 4300 3835 19128 17060 4300 3835 19128 17060 4300 3835 19128 17060 4500 4015 20018 17860 5490 4900 24422 21797 7500 6690 33363 29760 10500 9360 46708 41637

B

C

D

1 25 11/8 29 11/2 38 11/2 38 13/4 44 21/8 54 3 76 27/8 73 31/2 89 4 102 43/4 121 53/4 146 67/8 175 83/8 213 91/8 232 11 279 115/8 295 123/8 314 143/4 375 181/2 470 221/2 572

5/8 16 5/8 16 5/8 16 3/4 19 1 25 11/8 29 11/8 29 11/8 29 1 25 11/8 29 11/4 32 11/4 32 11/4 32 11/2 38 2 51 2 51 2 51 2 51 2 51 11/2 38 3 76

27/8 73 31/4 83 33/4 95 35/8 92 47/8 124 57/8 149 61/8 156 65/8 168 75/8 194 81/8 206 95/8 244 105/8 270 12 305 13 330 143/8 365 155/8 397 163/4 425 171/2 445 197/8 505 263/8 670 321/8 816

TAKE OUT E 21/4 57 21/2 64 21/2 64 27/8 73 41/8 105 51/8 130 53/8 137 6 152 61/2 165 7 178 81/4 210 91/4 235 101/2 267 111/2 292 123/4 324 14 356 151/8 384 157/8 403 177/8 454 233/8 594 283/4 730

F 3/8 M10 3/8 M10 3/8 M10 3/8 M10 5/8 M16 5/8 M16 5/8 M16 5/8 M16 3/4 M20 3/4 M20 7/8 M20 7/8 M20 1 M24 1 M24 11/4 M30 11/4 M30 11/4 M30 13/8 M36 11/2 M36 11/2 M36 13/4 M42

G 3/16

x1 5 x 25 3/16 x 1 5 x 25 3/16 x 1 5 x 25 3/16 x 1 5 x 25 1/4 x 11/4 6 x 32 1/4 x 11/4 6 x 32 1/4 x 11/2 6 x 38 1/4 x 11/2 6 x 38 3/8 x 2 10 x 51 3/8 x 2 10 x 51 3/8 x 21/2 10 x 64 3/8 x 21/2 10 x 64 1/2 x 21/2 13 x 64 1/2 x 21/2 13 x 64 5/8 x 3 16 x 76 5/8 x 3 16 x 76 5/8 x 3 16 x 76 3/4 x 3 19 x 76 3/4 x 4 19 x 102 3/4 x 5 19 x 127 1 x5 25 x 127

H 15/8 41 13/4 44 21/8 54 21/4 57 23/8 60 23/4 70 3 76 33/8 86 45/8 117 51/8 130 61/8 156 71/8 181 81/4 210 97/8 251 103/4 273 12 305 131/4 337 14 356 163/8 416 21 533 26 660

WGT EACH 0.61 0.28 0.66 0.30 0.69 0.31 0.75 0.34 2.14 0.97 2.43 1.10 2.92 1.32 3.19 1.45 7.12 3.23 7.96 3.61 11.85 5.38 13.59 6.16 21.33 9.68 23.65 10.73 38.78 17.59 42.89 19.45 46.35 21.02 58.67 26.61 89.32 40.52 140.89 63.91 246.44 111.79

BERGEN-POWER PIPE SUPPORTS

ALLOY THREE BOLT PIPE CLAMP Figure 304Z

C F

The Figure 304Z is designed for hot insulated pipelines.

The spacer on the top inner bolt provides uniform space for the connecting eyerod or weldless eyenut. See Figure 91Z for higher load ratings.

Temperature range: above 750° F (399° C) to 1050° F (566° C).

Material: Chrome Molybdenum Steel, ASTM A-387 Grade 22.

Compliance: Federal Specification WW-H-171 (Type 3), MSS-SP-69 (Type 3) and BSPSS-BS3974.

Finish: Plain.

Ordering: Specify figure number, and pipe size.

For Metric applications, specify Fig M304Z.

D E

CL G STOCK SIZE

B H

FIGURE 304Z – ALLOY THREE BOLT PIPE CLAMP PIPE SIZE 3/4 20 1 25 11/4 32 11/2 40 2 50 21/2 65 3 80 4 100 5 125 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600

MAXIMUM LOAD 950° F 1000° F 1050° F 510° C 538° C 566° C 870 600 440 3870 2669 1957 870 600 440 3870 2669 1957 870 600 440 3870 2669 1957 1400 1000 700 6228 4448 3114 1400 1000 700 6228 4448 3114 1400 1000 700 6228 4448 3114 1400 1000 700 6228 4448 3114 2300 1600 1100 10231 7117 4893 2300 1600 1100 10231 7117 4893 2600 1800 1300 11566 8007 5783 2600 1800 1300 11566 8007 5783 3000 2100 1500 13345 9342 6673 3000 2100 1500 13345 9342 6673 3900 2800 2000 17349 12456 8897 3900 2800 2000 17349 12456 8897 39 2800 2000 173 12456 8897 5000 3200 2000 22242 14235 8897 5500 3500 2700 24466 15569 12011

B

C

D

11/8 29 11/4 32 11/2 38 13/4 44 21/8 54 23/8 60 27/8 73 3 1 /2 89 4 102 4 3 /4 121 5 3 /4 146 67/8 175 83/8 213 9 1 /8 232 103/8 264 115/8 295 123/8 314 143/4 375

5/8 16 5/8 16 3 /4 19 1 25 1 25 1 25 1 25 1 25 1 1 /8 29 11/4 32 11/4 32 11/4 32 11/2 38 2 51 2 51 2 51 2 51 11/2 38

3 76 31/8 79 33/4 95 47/8 124 57/8 149 61/8 156 63/4 171 75/8 194 81/8 206 10 254 11 279 12 305 131/8 333 141/8 365 151/8 397 163/4 425 171/2 445 197/8 505

TAKE OUT E 21/2 64 25/8 67 27/8 73 41/8 105 51/8 130 53/8 137 6 152 61/2 165 7 178 85/8 219 95/8 244 101/2 267 115/8 295 123/4 324 14 356 151/8 384 157/8 403 177/8 454

F

G

H

3/8 M10 3/8 M10 3/8 M10 5/ 8 M16 5/ 8 M16 5/8 M16 5/8 M16 3 /4 M20 3/4 M20 7/8 M20 7/8 M20 1 M24 1 M24 11/4 M30 11/4 M30 11/4 M30 11/8 M36 11/2 M36

1 /4 x 1 6 x 25 1 /4 x 1 6 x 25 1 /4 x 1 6 x 25 1/4 x 11/4 6 x 32 1/4 x 11/4 6 x 32 1/4 x 11/4 6 x 32 1/4 x 11/4 6 x 32 3/8 x 2 10 x 51 3/ 8 x 2 10 x 51 3/8 x 21/2 10 x 64 3/8 x 21/2 10 x 64 1/2 x 21/2 13 x 64 1/2 x 21/2 13 x 64 5/8 x 3 16 x 76 5/8 x 3 16 x 76 5/8 x 3 16 x 76 3 /4 x 3 19 x 76 3 /4 x 4 19 x 102

158 41 13/4 44 21/4 57 23/8 60 23/4 70 3 76 33/8 86 45/8 117 51/8 130 61/8 156 71/8 181 81/4 210 97/8 251 103/4 273 12 305 131/4 337 14 356 163/8 416

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT EACH 1.09 0.49 1.14 0.52 1.23 0.56 2.48 1.12 2.70 1.22 2.76 1.25 3.19 1.45 7.30 3.31 7.96 3.61 12.26 5.56 14.04 6.37 21.33 9.68 24.00 10.89 38.78 17.59 43.13 19.56 47.78 21.67 58.67 26.61 90.82 41.20

WEIGHT POUNDS KILOGRAMS 37

BERGEN-POWER PIPE SUPPORTS

PIPE COVERING PROTECTION SADDLE Figure 351 to 357Z

zzzz ,,

yy yy ,, ,,

yy

zz {{ ||

zz || ,,

y {{ y ||

{{ || {{

The Figure 351 to 357APCP saddles are used to protect the insulation against damage and keep heat loss to a minimum.

They are designed for from 1" up to 5" of covering. All Saddles are 12" long with three tabs on each side for welding to pipe. Sizes 12" and larger have a welded in center rib.

Material: Carbon Steel.(except Fig 356Z and 357Z which are Chrome Molybdenum Steel)

Compliance: Federal Specification WW-H-171 (Type 40-A or 40-B), MSS-SP-69 (Type 39A or 39B) and BSPSS-BS3974.

Finish: Plain.

Ordering: Specify figure number and pipe size.

For Metric applications specify Figure M351 to M357Z.

COVERING THICKNESS 1" MAX

CL

11/2"

12" 3"

3"

11/2"

B

B

CENTER RIB SIZES 12" & LARGER

3"

A

A

Saddle with Fig. 173 Roll

Saddle with Fig. 67 Roll

FIGURE 351 TO 357Z – PIPE COVERING PROTECTION SADDLE

PIPE SIZE 3 /4

FIG NO. 351 352

20 353 351 1 25

352 353 351

11/4 32

352 353 354 351

11/2 40

352 353 354

MAXIMUM ACTUAL COVERING COVERING MAX. THICKNESS THICKNESS LOAD 15/16 1 1200 25 24 5338 11/2 11/2 1200 38 38 5338 2 2 1200 51 51 5338 1 11/16 1200 25 27 5338 11/2 19/16 1200 38 40 5338 2 21/8 1200 51 54 5338 7/8 1 1200 25 22 5338 11/2 15/8 1200 38 41 5338 2 115/16 1200 51 49 5338 21/2 21/2 1200 64 64 5338 1 11/16 1200 25 27 5338 11/2 19/16 1200 38 40 5338 2 23/8 1800 51 60 8007 21/2 27/8 1800 64 73 8007

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 38

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

T 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3

SADDLE WITH FIG. 173 ROLL ROLL A B SIZE 21/2 21/8 15/8 64 54 41 3 25/8 21/8 76 67 54 4 31/4 25/8 100 83 67 21/4 23/4 13/4 65 70 44 3 27/8 23/8 80 73 60 4 33/8 23/4 100 86 70 3 21/2 2 80 64 51 31/2 3 21/2 90 76 64 5 35/8 31/16 125 92 78 6 41/4 31/2 150 108 89 3 21/2 2 80 64 51 4 31/8 25/8 90 79 67 5 41/8 33/8 125 105 86 6 45/8 37/8 152 117 98

SADDLE WITH FIG. 67 ROLL ROLL A B SIZE 2-31/2 25/16 15/8 50-90 59 41 2-31/2 211/16 21/8 50-90 68 54 2-31/2 33/8 25/8 50-90 86 67 2-31/2 27/16 13/4 50-90 62 44 2-31/2 215/16 23/8 50-90 75 60 2-31/2 31/2 23/4 50-90 89 70 2-31/2 29/16 2 50-90 65 51 2-31/2 33/16 21/2 50-90 81 64 2-31/2 311/16 31/16 50-90 94 78 4-6 41/16 31/2 100-150 103 89 2-31/2 211/16 2 50-90 68 51 2-31/2 35/16 25/8 50-90 84 67 2-31/2 33/4 33/8 50-90 95 86 4-6 43/16 37/8 100-150 106 98

WEIGHT EACH 1.15 29 2.1 53 1.87 47 1.15 29 2.1 53 1.87 47 1.25 32 2.1 53 1.87 47 3.25 83 1.5 38 2.1 53 1.87 47 3.25 83

BERGEN-POWER PIPE SUPPORTS FIGURE 351 TO 357Z – PIPE COVERING PROTECTION SADDLE

PIPE SIZE

FIG NO. 351 352

2 50

353 354 355 351 352

21/2 64

353 354 355 351 352

3 76

353 354 355 351 352 353

4 102

354 355 356 356Z 357Z 351 352 353

5 127

354 355 356 356Z 357Z

MAXIMUM ACTUAL COVERING COVERING THICKNESS THICKNESS 1 11/16 25 27 11/2 19/16 38 40 2 21/8 51 54 21/2 25/8 64 67 3 31/16 76 78 1 11/16 25 27 11/2 17/8 38 48 2 23/8 51 60 21/2 27/8 64 73 3 33/8 76 86 1 11/16 25 27 11/2 19/16 38 40 2 21/16 51 52 21/2 29/16 64 65 3 31/16 76 78 1 11/16 25 27 11/2 19/16 38 40 2 21/16 51 52 21/2 29/16 64 65 3 31/8 76 79 4 41/8 102 105 4 41/16 102 103 51/2 511/16 140 144 1 11/16 25 27 11/2 19/16 38 40 2 21/16 51 52 21/2 29/16 64 65 3 31/16 76 78 4 41/4 102 108 4 43/16 102 106 51/2 511/16 140 144

MAX. LOAD 1200 5338 1200 5338 1800 8007 1800 8007 1800 8007 1200 5338 1200 5338 1800 8007 1800 8007 1800 8007 1200 5338 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 5000 22242 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 5000 22242 5000 22242

T 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 1/8

3 3/8

10 3/8 10 1/8 3 1/8 3 1/8 3 1/8 3 1/8 3 1/8 3 3/8 10 3/8 10

SADDLE WITH FIG. 173 ROLL ROLL A B SIZE 31/2 27/8 23/8 80 73 60 4 31/8 25/8 102 79 67 6 41/4 31/2 152 108 89 7 43/4 4 178 121 102 7 51/4 41/2 178 133 114 4 31/2 27/8 102 89 73 6 41/2 33/8 152 114 86 6 45/8 37/8 152 117 98 7 51/8 43/8 178 130 111 7 55/8 47/8 178 143 124 4 31/2 27/8 102 89 73 6 41/2 33/4 152 114 95 7 43/4 4 178 121 102 8 53/8 45/8 203 137 117 8 57/8 5 203 149 127 6 41/4 31/2 152 108 89 7 43/4 4 178 121 102 7 53/8 45/8 178 137 117 10 6 51/8 254 152 130 10 65/8 53/4 254 168 146 12 73/4 61/2 305 197 165 12 73/4 61/2 305 197 165 16 95/8 81/4 406 244 210 6 47/8 41/8 152 124 105 7 51/2 43/4 178 140 121 8 6 51/4 203 152 133 10 65/8 53/4 254 168 146 10 71/8 61/4 254 181 159 12 81/4 7 305 210 178 12 83/8 71/8 305 213 181 18 103/16 83/4 457 259 222

SADDLE WITH FIG. 67 ROLL ROLL A B SIZE 2-31/2 215/16 23/8 50-90 75 60 2-31/2 35/16 25/8 50-90 84 67 4-6 37/8 31/2 100-150 98 89 4-6 413/16 4 100-150 122 102 7-10 55/16 41/2 180-255 135 114 2-31/2 39/16 27/8 50-90 90 73 2-31/2 33/4 33/8 50-90 95 86 4-6 43/16 37/8 100-150 106 98 7-10 51/16 43/8 180-255 129 111 7-10 59/16 47/8 180-255 141 124 2-31/2 39/16 27/8 50-90 90 73 4-6 41/16 33/4 100-150 103 95 4-6 49/16 4 100-150 116 102 7-10 53/8 45/8 180-255 137 117 7-10 6 5 180-255 152 127 4-6 4 31/2 100-150 102 89 4-6 41/16 4 100-150 103 102 4-6 51/8 45/8 100-150 130 117 7-10 57/8 51/8 180-255 149 130 7-10 63/8 53/4 180-255 162 146 7-10 79/16 61/2 180-255 192 165 7-10 75/8 61/2 180-255 194 165 16 91/2 81/4 180-255 241 210 4-6 4 41/8 100-150 102 105 4-6 53/16 43/4 100-150 132 121 7-10 6 51/4 180-255 152 133 7-10 67/16 53/4 180-255 164 146 7-10 75/32 61/4 180-255 182 159 7-10 83/32 7 180-255 206 178 7-10 81/4 71/8 180-255 210 181 18 103/4 83/4 180-255 273 222

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS

LOADS POUNDS NEWTONS

WEIGHT EACH 1.63 41 2.1 53 3.12 79 3.63 92 4.4 112 1.75 44 2.4 61 3.12 79 3.63 92 4.4 112 1.75 44 2.75 70 3.5 89 3.93 100 4.4 112 2.13 54 3.0 76 3.5 89 3.93 100 5.0 127 6.3 160 6.3 160 26.4 671 2.38 60 3.0 76 3.62 92 4.06 103 5.0 127 6.3 160 14.95 380 27.4 696

WEIGHT POUNDS KILOGRAMS 39

BERGEN-POWER PIPE SUPPORTS FIGURE 351 TO 357Z – PIPE COVERING PROTECTION SADDLE

PIPE SIZE

FIG NO. 351 352 353

6 152

354 355 356 356Z 357Z 351 352 353

8 203

354 355 356 356Z 357Z 351 352 353

10 254

354 355 356 356Z 357Z 351 352 353

12 305

354 355 356 356Z 357Z

MAXIMUM ACTUAL COVERING COVERING THICKNESS THICKNESS 1 1 25 27 11/2 11/2 38 38 2 21/16 51 52 21/2 29/16 64 65 3 31/16 76 78 4 43/16 102 106 4 41/8 102 105 51/2 55/8 140 143 1 11/16 25 27 11/2 19/16 38 40 2 21/16 51 52 21/2 211/16 64 68 3 33/16 76 81 4 43/16 102 106 4 43/16 102 106 51/2 59/16 140 141 1 1 25 25 11/2 15/8 38 41 2 21/16 51 52 21/2 21/8 64 54 3 31/8 76 79 4 41/8 102 105 4 41/16 102 103 51/2 59/16 140 141 1 11/8 25 29 11/2 15/8 38 41 2 21/8 51 54 21/2 21/8 64 54 3 31/8 76 79 4 41/8 102 105 4 41/8 102 105 51/2 59/16 140 141

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 40

LOADS POUNDS NEWTONS

WEIGHT POUNDS KILOGRAMS

MAX. LOAD 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 7200 32028 7200 32028 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 1800 8007 7200 32028 7200 32028 1800 8007 1800 8007 1800 8007 1800 8007 5000 22242 5000 22242 7200 32028 7200 32028 2500 11121 5000 22242 5000 22242 5000 22242 5000 22242 5000 22242 11000 48932 11000 48932

T 3/16

5 3/16

5 3/16

5 3/16

5 3/16

5 3/16

5 3/8

10 3/8 10 3/16 5 3/16 5 3/16 5 3/16 5 3/16 5 3/16 5 3/8 10 3/8 10 3/16 5 3/16 5 3/16 5 3/16 5 3/16 5 3/16 5 3/8 10 3/8 10 3/16 5 3/16 5 3/16 5 3/16 5 3/16 5 3/16 5 3/8 10 3/8 10

SADDLE WITH FIG. 173 ROLL ROLL A B SIZE 7 53/8 45/8 178 137 117 8 57/8 5 203 149 127 10 63/8 51/2 254 162 140 12 7 6 305 178 152 12 73/4 61/2 305 197 165 12 87/8 75/8 305 225 194 12 87/8 77/8 305 225 200 18 119/16 10 457 294 254 10 7 6 254 178 152 10 7 6 254 178 152 12 71/2 61/2 305 191 165 14 81/4 7 356 210 178 12 87/8 75/8 305 225 194 16 10 83/4 406 254 222 16 10 83/4 406 254 222 20 1113/16 101/4 508 300 260 10 71/4 6 254 184 152 10 7 6 254 178 152 12 71/2 61/2 305 191 165 16 95/8 81/8 406 244 206 16 101/8 87/8 406 257 225 18 111/8 93/4 457 283 248 18 111/8 93/4 457 283 248 20 131/8 111/4 508 333 286 14 93/8 81/8 356 238 206 14 93/8 81/8 356 356 238 16 10 85/8 406 254 219 18 101/2 91/8 457 267 232 18 111/4 93/4 457 286 248 20 121/4 103/4 508 311 273 20 121/4 103/4 508 311 273 24 141/4 123/8 610 362 314

SADDLE WITH FIG. 67 ROLL ROLL A B SIZE 4-6 51/8 45/8 100-150 130 117 7-10 63/16 5 180-255 157 127 7-10 61/2 51/2 180-255 165 140 12-15 75/8 6 305-380 194 152 7-10 71/2 61/2 180-255 191 165 12-15 813/16 75/8 305-380 224 194 12-15 87/8 77/8 305-381 225 200 18 111/2 10 180-255 292 254 7-10 69/16 6 180-255 167 152 7-10 73/16 6 180-255 183 152 7-10 711/16 61/2 180-255 195 165 12-15 811/16 7 305-380 221 178 12-15 827/32 75/8 305-380 225 194 12-15 913/16 83/4 305-380 249 222 12-15 97/8 83/4 305-380 251 222 20 113/4 101/4 180-255 298 260 7-10 69/16 6 180-255 167 152 7-10 73/16 6 180-255 183 152 7-10 711/16 61/2 180-255 195 165 16-20 911/16 81/8 406-508 246 206 16-20 103/8 87/8 406-508 264 225 16-20 111/16 93/4 406-508 281 248 16-20 111/8 93/4 406-508 283 248 20 125/8 111/4 406-508 321 286 12-15 91/4 81/8 305-380 235 206 12-15 97/8 81/8 305-380 251 206 16-20 915/16 85/8 406-508 252 219 16-20 109/16 91/8 406-508 268 232 16-20 111/8 93/4 406-508 283 248 16-20 121/16 103/4 406-508 306 273 16-20 121/8 103/4 406-508 308 273 24 133/4 123/8 406-508 349 314

WEIGHT EACH 3.85 98 4.75 121 6.28 160 7.09 180 8.1 206 6.3 160 16 406 27.5 699 5.05 128 5.25 133 7.0 178 7.55 192 9.9 251 1.31 33 13.1 333 34.1 866 5.05 128 5.25 133 7.0 178 8.75 222 10.7 272 13.88 353 13.88 353 36.6 930 7.3 185 7.35 187 9.2 234 10.04 255 11.0 279 14.45 367 14.45 367 36.6 930

BERGEN-POWER PIPE SUPPORTS FIGURE 351 TO 357Z – PIPE COVERING PROTECTION SADDLE

PIPE SIZE

FIG NO. 352 353 354

14 356

355 356 356Z 357Z 352 353 354

16 406

355 356 356Z 357Z 352 353 354

18 457

355 356 356Z 357Z 352 353 354

20 508

355 356 356Z 357Z 352 353 354

24 610

355 356 356Z

MAXIMUM ACTUAL COVERING COVERING THICKNESS THICKNESS 11/2 11/2 38 38 2 2 51 51 21/2 21/8 64 54 3 3 76 76 4 4 102 102 4 4 102 102 51/2 51/2 140 140 11/2 11/2 38 38 2 2 51 51 21/2 21/2 64 64 3 3 76 76 4 4 102 102 4 4 102 102 51/2 51/2 140 140 11/2 11/2 38 38 2 2 51 51 21/2 21/2 64 64 3 3 76 76 4 4 102 102 4 4 102 102 51/2 51/2 140 140 11/2 11/2 38 38 2 2 51 51 21/2 21/2 64 64 3 3 76 76 4 4 102 102 4 4 102 102 51/2 51/2 140 140 11/2 11/2 38 38 2 2 51 51 21/2 21/2 64 64 3 3 76 76 4 4 102 102 4 4 102 102

MAX. LOAD 5000 22242 5000 22242 5000 22242 5000 22242 5000 22242 11000 48932 11000 48932 5000 22242 5000 22242 7200 32028 7200 32028 7200 32028 11000 48932 11000 48932 5000 22242 7200 32028 7200 32028 7200 32028 7200 32028 13200 58719 13200 58719 7200 32028 7200 32028 7200 32028 7200 32028 7200 32028 13200 58719 13200 58719 7200 32028 7200 32028 7200 32028 7200 32028 7200 32028 13200 58719

T 3/16

5 3/16

5 3/16

5 3/16

5 3/16

5 3/8

10 3/8 10 3/16 5 3/16 5 3/16 5 3/16 5 3/16 5 3/8 10 3/8 10 3/16 5 3/16 5 3/16 5 3/16 5 1/4 6 3/8 10 3/8 10 3/16 5 3/16 5 3/16 5 3/16 5 1/4 6 3/8 10 3/8 10 3/16 5 3/16 5 3/16 5 1/4 6 1/4 6 3/8 10

SADDLE WITH FIG. 173 ROLL ROLL A B SIZE 16 101/4 9 406 260 229 18 103/4 93/8 457 273 238 18 113/8 97/8 457 289 251 18 12 101/2 457 305 267 24 131/4 113/4 610 337 298 24 123/4 111/4 610 324 286 24 15 131/8 610 381 333 18 111/8 93/4 457 283 248 20 113/4 101/4 508 298 260 20 121/4 103/4 508 311 273 24 127/8 111/8 610 327 283 24 14 121/4 610 356 311 24 14 121/4 610 356 311 30 161/5 137/8 762 411 352 20 121/4 103/4 508 311 273 24 131/8 115/8 610 333 295 24 131/2 113/4 610 343 298 24 14 121/4 610 356 311 24 153/8 135/8 610 330 346 24 151/8 133/8 610 384 340 30 171/3 15 762 440 381 24 131/2 113/4 610 343 298 24 14 121/4 610 356 311 24 145/8 127/8 610 371 327 24 151/4 133/4 610 387 349 30 161/2 141/4 762 359 362 7 165/8 143/8 178 422 365 30 181/3 16 762 465 406 30 163/8 141/8 762 416 359 30 163/8 141/8 762 416 359 30 17 143/4 762 432 375 30 171/2 151/4 762 445 387 30 183/4 161/2 762 422 419 30 187/8 165/8 762 479 422

SADDLE WITH FIG. 67 ROLL ROLL A B SIZE 16-20 103/8 9 406-508 264 229 16-20 103/4 93/8 406-508 273 238 16-20 111/4 97/8 406-508 286 251 16-20 113/4 101/2 406-508 298 267 22-24 123/8 113/4 559-610 314 298 22-24 117/8 111/4 559-610 302 286 24 141/2 131/8 559-610 368 333 16-20 111/4 93/4 406-508 286 248 16-20 115/8 101/4 406-508 295 260 16-20 121/4 103/4 406-508 311 273 22-24 127/8 111/8 559-610 327 283 22-24 139/16 121/4 559-610 344 311 22-24 135/8 121/4 559-610 346 311 30 153/4 137/8 559-610 400 352 16-20 121/4 103/4 406-508 311 273 22-24 123/8 115/8 559-610 314 295 22-24 13 113/4 559-610 330 298 22-24 131/2 121/4 559-610 343 311 22-24 145/8 135/8 559-610 371 346 22-24 143/8 133/8 559-610 365 340 30 167/8 15 559-610 429 381 22-24 13 113/4 559-610 330 298 22-24 131/2 121/4 559-610 343 311 22-24 141/8 127/8 559-610 359 327 26-30 147/8 133/4 660-762 378 349 26-30 153/4 141/4 660-762 400 362 26-30 157/8 143/8 660-762 403 365 30 177/8 16 660-762 454 406 26-30 153/4 141/8 660-762 400 359 26-30 153/4 141/8 660-762 400 359 26-30 165/8 143/4 660-762 422 375 26-30 171/8 151/4 660-762 435 387 26-30 18 161/2 660-762 457 419 26-30 181/8 165/8 660-762 460 422

WEIGHT EACH 8.25 210 9.2 234 10.04 255 11.0 279 15.5 394 15.5 394 36.6 930 8.25 210 9.2 234 13.69 348 14.65 372 15.5 394 15.5 394 39 991 9.35 237 12.0 305 14.19 360 15.25 387 15.5 394 15.5 394 40 1016 11.05 281 12.4 315 14.19 360 15.25 387 16.6 422 16.6 422 42.4 1077 12.90 328 13.9 352 18.07 459 19.35 491 17.2 437 17.2 437

41

BERGEN-POWER PIPE SUPPORTS

CHANNEL ASSEMBLY Figure 371 E

The Figure 371 Channel assembly is composed of two channels welded back to back with a spacer on each end. The washer plates, four (4), for the support rods are shipped loose.

The allowable safe loads are based on a factor of safety of five for the channels only.

Material: Carbon Steel.

Finish: Plain, Galvanized.

Ordering: Specify figure number, channel size, rod size and C to C dim. For Metric applications specify Figure M371.

L

C–C

W

S

T

W H DIA.

FIGURE 371 – CHANNEL ASSEMBLY ROD DIA H HOLE S W T L

SPAN SIZE 3] [4.1 4] [5.4 5] [6.7 6] [8.2 8] [11.5 12] [20.7

3/8 10 1/2 13 9/16 14 3 76 1/4 6 3/8 10

1/2 13 5/8 16 11/16 17 3 76 1/4 6 3/8 10

12 305

18 441

10000 44484 17500 77847 27600 122776 39500 175712 74500 331406 — —

6800 30249 11600 51601 18400 81851 26300 116993 49600 220641 — —

DIMENSIONS TEMPERATURE INCHES FAHRENHEIT MILLIMETERS CELSIUS 42

5/8 16 3/4 19 13/16 21 3 76 3/8 10 3/8 10

LOADS POUNDS NEWTONS

3/4 19 7/8 22 15/16 24 4 102 3/8 10 3/8 10

7/8 22 1 25 11/16 27 4 102 1/2 13 3/8 10

1 25 11/4 32 13/8 35 4 102 1/2 13 3/8 10

11/4 32 11/2 38 15/8 41 5 127 1/2 13 3/8 10

11/2 38 13/4 44 17/8 48 5 127 3/4 19 3/8 10

13/4 44 2 51 21/4 57 5 127 3/4 19 3/8 10

2 51 21/4 57 21/2 64 5 127 3/4 19 3/8 10

21/4 57 21/2 64 23/4 70 6 152 3/4 19 3/8 10

21/2 64 23/4 70 3 76 6 152 3 /4 19 3 /8 10

23/4 70 3 76 31/4 83 6 152 3/4 19 3/8 10

ALLOWABLE CONCENTRATED LOAD AT CENTER OF SPAN 24 30 36 42 48 610 762 914 1067 1219 5100 22687 8800 39146 13800 61388 19800 88078 37300 165925 98500 438167

WEIGHT POUNDS KILOGRAMS

4100 18238 7000 31139 11000 48932 15800 70285 29800 132562 78800 350534

3400 15125 5800 25801 9200 40925 13200 58719 24800 110320 65600 291815

2900 12900 5000 22242 7900 35142 11300 50267 21300 94751 56300 250445

2500 11121 4400 19573 6900 30694 9900 44039 18650 82963 49200 218861

3 76 31/4 83 31/2 89 6 152 3/4 19 1/2 13

31/4 83 31/2 89 33/4 95 6 152 3/4 19 1/2 13

31/2 89 33/4 95 4 102 7 178 3/4 19 1/2 13

60 1524

72 1829

2000 8897 3500 15569 5500 24466 7900 35142 14900 66281 39400 175267

1700 7562 2900 12900 4600 20463 6600 29359 12400 55160 32800 45907

BERGEN-POWER PIPE SUPPORTS

EXECUTIVE OFFICES MASSACHUSETTS 225 Merrimac Street Woburn, MA 01801 Tel: (781) 935-9550 Fax: (781) 935-7664 e-mail: BPWoburn@aol.com

PENNSYLVANIA 829 Beaver Avenue Pittsburgh, PA 15233 Tel: (412) 323-1545 Fax: (412) 323-1904 e-mail: BergenPwr@aol.com

MANUFACTURING PLANT Eighth Street Gate Donora Industrial Park Donora, PA 15033