ProLyft - The Next Level - Complete ProLyft Range

Get Ready for titel

The Next Level

Get Ready for the Next Level

When simplicity in motion is the ultimate goal, there’s always a next level to meet. ProLyft invites you to take that level further with a product range that is fit to meet the future.

Made for entertainment

ProLyft hoists and hoist control systems are designed to meet the increasingly exacting demands of the entertainment market. For simple as well as complex lifting applications, ProLyft has a fitting solution, all designed and developed around the principle that easy and intuitive operation helps to create a safe lifting environment.

ProLyft is a Prolyte Group brand

Aetos Aetos as the starting point Aetos hoists and controllers make it possible to create the best and most affordable solution for every lifting situation. Standard Aetos hoists and controls are fit to cover your average lifting situation, they are designed with an understanding of the requirements of entertainment rigging, making them easy and intuitive to operate.

The system offers power and control connections which are commonly used within the entertainment sector worldwide and are easy to adapt to special power requirements.

The control system offers added safety through a clear overview of selected hoists during operation, while an optional remote control guarantees an overview of the lifting situation from the best possible viewpoint.

Remote control All Aetos remote controls have an ergonomic design to make them easy to handle and operate.

The Aetos 1-channel remote control can be used as a remote up/down in combination with the Aetos Pro controllers, or as a pickle on a single Auxo hoist.

The Aetos 24-channel remote control brings all of the functionality of the Pro controllers to the remote control, including possibilities for both left and right hand operation.

All remote controls connect to the hoists or controllers using the Thuja Network connection (7p XLR), indicators on the front panel show errors, selections and availability.

www.prolyft.com

Aetos+ Step up to a next level The ProLyft Aetos+ range is an extension to your standard Aetos products with helpful accessories for load measuring and positioning.

Creating the possibility to safely suspend loads above people, protect your lift against overloading and to provide more essential information to the operator, thereby adding safety in your lifting application.

Load cells, geared limit switches and encoders work as simple addons to the existing systems. These add-ons are wired to a separate smart control interface, making the system very cost-efficient and easy to up- or downscale for each lifting application.

Group protection Connecting the control interface in a position between the remote control and the hoist controller, each add-on is automatically connected to the corresponding hoist, thereby also creating group protection. Crossing any limit of one of the selected hoists will stop the complete selected group.

Aetos system integration Aetos+ accessories fully integrate with all Aetos hoists and Pro controllers: • Independent from the type of control, direct or low voltage control • Independent from the load capacity • Independent from the amount of controlled channels

Due to these options the system offers ultimate flexibility, parts of the installation can be upgraded without losing control over the non-upgraded part.

Load monitoring The load monitoring interface is positioned in between the remote control panel and the hoist controller. The load monitor reads the load cells and connects the load data to the corresponding hoist.

Additional functions of the load monitoring interface are: • Hoist and chain length selection to detect self weight of hoists • Motor up or motor down selection • Overload level switch-off setting • Overload level warning setting • Peak hold display Hoists can always be lowered when an overload is detected.

The connection of the hoist to the hoist controller remains unchanged and is identical to the Aetos range, for either Direct Control or Low Voltage Control.

Auxo Auxo, made for entertainment The ProLyft Auxo range provides out-of-the-box solutions for simple to complex situations, answering the daily needs for safe rigging. The Auxo system is based on the Aetos hoist bodies, but offers a total new approach to lifting and control solutions, stepping away from control systems as we know and opening a world of new possibilities.

Thuja network Thuja is a digital data network for controlling lifting equipment in the entertainment industry; safe enough for lifting above persons, simple enough for touring applications.

All hoists are connected via the Thuja network using a cat5 cable with 7-pin XLR data connection. You can daisy chain from one hoist to another. Like this all hoist are connected with an individual address, either by self addressing or by patching, based on the unique hoist numbers.

Power and Emergency Stop Each hoist has its own emergency stop relay, power for the hoist may be taken from any power outlet available. In this set up you can:

Integrated components All Auxo hoists are standard equipped with: • Load read-out • Hook position read-out • Phase order detection, up is always up • Overload log and overload protection • Motor up / motor down detection • Registration of running hours and loaded hours • Maintenance advice based on running/loading hours Operating the Auxo The Auxo hoist can be operated with: • A stand alone 1-channel remote control • A 24-channel remote control in a group of maximum 24 hoists • A touch screen controller in a set of maximum 999 hoists

• Combine power for the hoists with power for the lighting department • Take power from the nearest wall outlet • Daisy chain power from one hoist to another

Load Load monitoring monitoring Upgrade Upgradeyour yourAetos Aetoshoist hoistwith withaaload loadcell cell Adding a load cell to a standard Aetos hoist Adding a load cell to a standard Aetos hoistisiseasy easyand andcan canbebedone done within minutes: within minutes: ••The Theload loadcell cellreplaces replacesone oneofofthe thehook hookconnection connectionpins pins ••The amplifier can be positioned either inside The amplifier can be positioned either insidethe thehoist, hoist,ororininaa separate separatebox boxoutside outsidethe thehoist hoist •• Each load cell is wired Each load cell is wiredwith withaa4pin 4pinXLR XLRcable cable

Load Loadmonitoring monitoringinterface interface The load The loadcells cellsare arepowered poweredfrom fromthe theload loadmonitor monitorinterface, interface,which which isispositioned in between the remote control panel and positioned in between the remote control panel andthe thehoist hoist controllers. controllers.The Theload loadmonitor monitorreads readsthe theload loadcells cellsand andconnects connectsthe the data to the corresponding hoist. data to the corresponding hoist.

Hoist Hoistcan canalways alwaysbebelowered loweredwhen whenananoverload overloadisisdetected. detected.The Theload load monitor interface is available up to 24 channels. monitor interface is available up to 24 channels.

Load Loadcells cellspins pinsare areavailable availablefor forallallloading loadingcapacities. capacities.Additional Additional specifications: specifications: •• 200% 200%proof proofload load •• 500% ultimate 500% ultimateload load •• <<+/+/-1% 1%accuracy accuracy •• pins pinsare areIP67 IP67

Additional Additionalfunctions functionsofofthe theload loadmonitoring monitoringinterface: interface: •• Hoist and chain length selection Hoist and chain length selectiontotodetect detectself selfweight weightofofhoists hoists •• Motor up or motor down selection Motor up or motor down selection •• Overload Overloadlevel levelswitch-off switch-offsetting setting •• Overload level warning Overload level warningsetting setting •• Peak Peakhold holddisplay display

Aetos AetosHoist, Hoist,Direct DirectControl Control PLA-30-XX; PLA-30-XX;Motor Motorpower powercable cable16A 16ACeeform-4pin; Ceeform-4pin;3phase 3phase++ground ground PLA-34-02; PLA-34-02;Break-out Break-outMulti Multicable cableHarting-16p Harting-16p(male) (male)toto4x4x16A 16ACeeform-4pin Ceeform-4pin(female) (female) PLA-33-XX; PLA-33-XX;Multi Multicable cableHarting-16p; Harting-16p; Aetos AetosHoist, Hoist,Low LowVoltage VoltageControl Control PLA-30-XX; PLA-30-XX;Motor Motorpower powercable cable16A 16ACeeform-4pin; Ceeform-4pin;3phase 3phase++ground ground PLA-31-XX; PLA-31-XX;Low LowVoltage VoltageControl Controlcable cable16A 16ACeeform-4pin; Ceeform-4pin;3phase 3phase++ground ground PLA-34-04; PLA-34-04;Break-out Break-outMulti Multicable cableHarting-16p Harting-16p(male) (male)to:to:4x4x16A 16ACeeform-4pin Ceeform-4pin(female) (female)++4x4x16A 16ACeeform-4pin Ceeform-4pin(male) (male) PLA-33-XX; PLA-33-XX;Multi Multicable cableHarting-16p; Harting-16p; Aetos AetosControllers Controllers PTH-7PXLR-XX; PTH-7PXLR-XX;Thuja Thujanetwork networkcable cable7p7pXLR XLR PLA-32-XX; PLA-32-XX;Power Powercable cable32A 32ACeeform-5pin; Ceeform-5pin;3phase 3phase++Neutral Neutral++ground ground Aetos+ Aetos+Load Loadcells cells PLCC-4PXLR-XX; PLCC-4PXLR-XX;Loadcell Loadcellcable cable4p4pXLR XLR PLCC-34-02; PLCC-34-02;Break-out Break-outMulti Multicable cableHarting Harting24p 24p(male) (male)to:to:4x4x4p4pXLR XLR(female) (female) PLCC-33-XX; PLCC-33-XX;Multi MultiCable CableHarting Harting24p 24p Auxo Auxohoists hoists PLA-36-XX; PLA-36-XX;Power Powercable cable16A 16ACeeform-5pin; Ceeform-5pin;3phase 3phase++Neutral Neutral++ground ground PTH-7PXLR-XX; PTH-7PXLR-XX;Thuja Thujanetwork networkcable cable7p7pXLR XLR

Multifunctional remote control ProLyft 1-channel remote control The ProLyft 1-channel remote control has an ergonomic design for easy handling and operation. The 1-channel remote control fits perfectly in your hand and has an elastic band for optimal grip.

All remote controls use the Thuja Network connection (7p XLR).

Indicators on the front panel show errors, selections and availability.

1 Remote 2 functions The ProLyft 1-channel remote control can be used as a remote up/ down in combination with the Aetos Pro controllers; operating the hoists as pre-selected on the hoist control front panel.

Hoist controllers can be linked; in this case the remote control will operate all selected hoists in the complete system.

In order to leave the remote safely unattended a DESELECT button is available to release the selection from the remote without the need to walk to the hoist controllers. The ProLyft 1-channel remote control can be used as a 1-way controller (pickle) in combination with the Auxo hoist.

Specifications: • Sealed front panel with integrated buttons • UP, DOWN and DESELECT button • LED indicators for Power, Operational and Controller Fault • Powered over the network • E-stop at SIL2 level

Worldwide service network ProLyft has established an extensive network of worldwide Service Points, unique among hoist manufacturers. All Service Points are fully equipped and staffed by comprehensively trained personnel. All Service Points are certified to perform any required maintenance or repair jobs on ProLyft hoists. Each Service Point maintains an inventory of spare parts as well as a stock of standard hoists. All technical and

sales personnel are re-trained on a yearly basis to ensure a consistently high level of service expertise.

Have a look at www.prolyte.com/partners for a complete overview of the complete ProLyft network or scan this QR code.