DECEMBER 2021
30 YEARS OF SERVICE 1991-2021
STAYING MOBILE IN QUEENSLAND
“Leads the Way”
$9m boost to support forestry
CABIN The most comfortable cabin ever seen in the forest provides unmatched operator efficiency and productivity.
H7 Harvester Head
KING SCORPION The award winning PONSSE Scorpion King is already one of the most successful products ever produced by Ponsse. Right now, over 1000 units are working in more than 20 different countries including Australia.
INTELLIGENT STABILISATION system monitors the position of the crane and
Recent improvements have taken the Scorpion King to a new level with increases in productivity and fuel efficiency, hydraulic performance and a range of other subtle upgrades. Now more than ever the PONSSE Scorpion King is an Operators dream.
continually presses the rear frame in the direction of the weight, offering the best stability.
HYDRAULIC SYSTEM 62% larger hydraulic lines make the Scorpion King even more productive with lower fuel consumption.
ENGINE Powerful and cost-effective Mercedes Benz/MTU engine
Ponsse Scorpion New Features Australia 230x320.indd 1
Randalls Equipment Company Pty Ltd 8 Wallace Ave Point Cook, Victoria, 3030 Phone: 03 9369 8988 Sales: 0437 54 11 54 Email: randalls@randalls.com.au Web: www.randalls.com.au
12.11.2021 11.45.56
In the news
Softwood estate remains stable, hardwood declines A
d
G
N
ustralia’s commercial plantation estate stood at 1.8 million hectares in 2019-20 according to the Australian Bureau of Agricultural and Resource Economics and Sciences. ABARES Acting Executive Director, Dr Jared Greenville, said the report shows the softwood estate remained relatively stable at about one million hectares. “However, the hardwood estate declined by about 200 thousand hectares compared to the previous estimate for 2014-15,” Dr Greenville said. “Annual softwood log availability is forecast to decline from an average of 17 million cubic meters over the period 2015–19 to approximately 15 million cubic meters a year over 2020–24. “The lower projected softwood production is due to a range of reasons including the bushfires in the summer of 2019-20 and the age of the trees in the ground. Softwood plantations are based on a 30-year rotation so planting trees now won’t increase wood supply for some time to come. “However, we are expecting wood supply to gradually recover out to 2050. By 2035-39 we are projecting softwood production to be about 18.5 million cubic meters, off the back of replanting and productivity gains. If realised this would be a record,” he said. “There could be an average of 2.8 million cubic meters more softwood sawlogs a year available over 2035-39 compared to the average annual harvest over 2015-19.” For hardwood plantations, the reduction in the estate is expected to have a relatively small impact on projected hardwood availability. “Most of the removed hardwood plantations were low yielding or far from processing or export facilities, so converting them to another use has had minimal impact on projected supply,” Dr Greenville said. “We are also seeing a slight shift for both softwood and hardwood from www.timberbiz.com.au
11.45.56
lower value pulplog production to higher value sawlog production. For example, some plantation managers have been successful in finding new markets for saw and veneer logs.” The Victorian Forest Products Association believes new trees are needed to tackle climate change and meet structural timber demand “The increasing supply gap between the softwood estate and new builds tells quite a story over time and indicates an urgent need to improve our sovereign construction timber supply capability,” VFPA CEO Deb Kerr said. Forestry is committed to supporting the Federal Government in its billion trees program, but those trees need to go in the ground somewhere - and not all land is created equal. The increasing cost of agricultural land is a major
CUSTOMISED SOLUTIONS FOR YOUR SAWMILL AE GIBSON & SONS Over 100 years of timber engineering solutions for optimum mill productivity • Twin Saw Log Edgers • Log Carriages • Resaws • Multisaws & Board Edgers • Docking Systems • Automatic Sorters and Stackers • Complete turnkey projects
From major start ups to retro fits contact: Ph: 02 6559 4001 E: info@aegibsonman.com.au www.aegibsonman.com.au
Continued on page 10 Australian Forests & Timber News December 2021
3
My view DECEMBER 2021 Issue 8 – Volume 30 Established 1991 News My View Silviculture Finance Machinery Mill profile
3 ― 13 4 14 15 18 ― 28 29
Front Cover: GMT Logging’s Bruks mobile chipper model 806.2 STC in action in Queensland. Picture: Callan Groth Publisher and Chief Executive: Hartley Higgins General Manager: Robyn Haworth Editor: Bruce Mitchell b.mitchelll@ryanmediapl.com.au Adelaide Office (08) 8369 9512 Advertising: Gavin de Almeida g.dealmeida@ryanmediapl.com.au Adelaide Office (08) 8369 9517 Creative Services: Jarren Gallway Jessica Masters Publication Design: Jarren Gallway Trader classifieds: g.dealmeida@ryanmediapl.com.au Adelaide Office (08) 8369 9517 Subscriptions: subs@forestsandtimber.com.au Adelaide Office (08) 8369 9522 Subcription rates One-year (8 editions) $55 Two-years (16 editions) $95 Accounts: Adelaide Office (08) 8369 9555 Postal Address: 630 Regency Road, Broadview South Australia 5083 Phone: (08) 8369 9555 Fax: (08) 8369 9501 Melbourne Office: Suite 2262, 442 Auburn Rd, Hawthorn VIC 3122 Phone: (03) 9810 3262 Find us on Facebook @australianforestsandtimbernews Website www.timberbiz.com.au Printed by Lane Print, Adelaide, SA
Conditions
The opinions expressed in Australian Forests & Timber News are not necessarily the opinions of or endorsed by the editor or publisher unless otherwise stated. All articles submitted for publication become the property of the publisher. All material in Australian Forests & Timber News copyright 2021 © Ryan Media. All rights reserved. No part may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical including information and retrieval systems) without written permission of the publisher. While every effort has been made to ensure the accuracy of information, the published will not accept responsibility for errors or omissions, or for any consequences arising from reliance on information published.
MEDIA
INDEPENDENT & AUSTRALIAN OWNED
4
Greens claim Tasmanian forestry damages state’s brand is hypocritical
T
asmanian forestry isn’t damaging the state’s brand Surely the complete hypocrisy of the Tasmanian Greens and a handful of tourism operators latest claim, that Tasmanian forestry is damaging the Tasmanian brand, is not lost on the public. Native forestry and tourism in Tasmania are now and always have been intrinsically linked and complimentary to each other. Tasmanian timber has been the centrepiece of the state’s unique and very marketable identity for decades. From the famous, soaring, wave-like celery top pine ceiling in the award winning Saffire Freycinet to the beautiful aroma of Tasmanian specialty timbers through Salamanca Market, Tasmanian timber is and always has been a tourism showpiece. I challenge anyone to find a Tasmanian tourist attractions or icon that does not use or showcase native Tasmanian Timbers, portraying a natural Tasmanian brand and using this point of difference to market their business. Simply look at the stunning Tasmanian Oak Veneer adorning the new Cradle Mountain Visitor Centre. Or
MY VIEW Nick Steel CEO, Tasmanian Forest Products Association
Pump House Point where (and I quote direct from their web site) “common spaces subtly give way to more refined Tasmanian timber veneer panelling. Material and product selection is subtle in its response to environmental stewardship with natural materials favoured where possible”. What could be better than local timber? Imports from Indonesia? Perhaps plastic cladding from China? I have never seen plaster or concrete feature on a tourism icon’s web site as a point of difference. Wall in the Wilderness, The Abt Railway, Three Capes Huts, Derby’s Float-
ing Sauna, more hotels, wineries, cafes and restaurants than I could even mention showcase Tasmanian timber. Then there are our distilleries, art galleries, museums, university, airports, football and basketball stadiums, all adorned with Tasmanian timber. Our tourism businesses don’t just use timber, they drape themselves in Tasmanian timber and then yell it from the rooftops to promote what we have. This latest claim is not just wrong, it’s damaging to the tourism businesses who choose to showcase these timbers as part of their brand. The Greens and some in tourism want to stop our diversified mixed forests and instead have single species plantation timbers or imported timber only. Try promoting that on your web site. This hypoc-
risy and political opportunism must stop. The people in our industry who produce these timber products know that the forest practices undertaken in Tasmania today are world leading and that our public native production forests will remain as native forests forever. Sometimes managed forests will grow close to bike tracks or other attractions, but rest assured that forestry in Tasmania has no intention of destroying the livelihood of anyone operating tourist operations, in fact, we want to continue our close association to strengthen a Tasmanian brand based on natural and sustainable local products. Lastly, congratulations to all the winners of the recent Tasmanian Tourism Awards who were lucky enough to take home a trophy made from Tasmanian myrtle.
Merry Christmas and a better new year
T
he year almost behind us now has been all about the native timber industry’s future, China, protests, litigation. And of course the allencompassing presence of Covid-19 and its effects on business, lifestyle and our health. But the biggest challenge ahead must be the native timber industry which faces imminent closure in both Victoria and Western Australia. A voice of sanity raised its head through Forestry Australia Vice President Dr Michelle Freeman who says the escalating situation in Victoria shows the State’s
ria and Federally. The outcomes, regardless of who wins, will certainly have a current approach to forest huge impact on the timber management is simply not industry. On a positive note, there working. Forestry Australia – a pro- has been the success of Forfessional body of forest sci- estry Australia’s rebranding entists, managers and grow- from the IFA/AFG name and ers - says it is ready to work its incredibly successful 2021 annual conference in with governments. But is the government in Tasmania. Yes, it was both a physiVictoria ready to work with cal and virtual conference Forestry Australia. Recent history sadly sug- with some participants unable to travel because of the gests it is not. Next year will see elec- many and varied Covid retions in Victoria, South Aus- strictions. But the industry did get a tralia and of course, Federchance to get together again ally. The ones to have the big- and talk about the industry. I would like to thank the gest impact will be in Victo-
Australian Forests & Timber News December 2021
many contributors and industry organisations who are integral to this publication, plus the advertisers who have supported us to bring it to our readers. Our sales, editorial production and support team remain passionate about the industry and we look forward to serving our customers and readers in 2022. After all, we print your industry details on a product that you produce. Best wishes to all for a Merry and Safe Christmas followed by a Prosperous New Year. Bruce Mitchell Editor www.timberbiz.com.au
AFTN 330
CAT 330 GC
WITH TALON LOG GRAB AND INTEGRATED SAW
THE CAT 330GC WITH A TALON LOG GRAB AND INTEGRATED SAW IS A PROVEN PERFORMER IN THE BUSH • 30 ton Next Generation Excavator base • Cat C7.1 Tier 3 Engine (no Adblue)
For more information:
• Long Undercarriage • High ambient cooling with reverse fan • AVAILABLE RIGHT NOW* Stuart Bell Phone: (+61) 418 513 516 Forestry Specialist – South East VIC
• Fuel efficiency with Cat Fuel Edge program • Talon Grab with Integrated Saw (Australian made)
Mick Hardy Phone: (+61) 418 141 820 Equipment Sales – North West TAS
GET IN TOUCH TO FIND OUT MORE
1300 923 267 (WADAMS) | ENQUIRE@WILLIAMADAMS.COM.AU | WILLIAMADAMS.COM.AU FOLLOW US... TERMS AND CONDITIONS: *Availability at time of print. William Adams machine fleet availability can change daily. © 2021 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow”, the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
AFTN 330GC Full Pg Advert v4.indd 1
22/11/2021 2:00:05 PM
Forestry Australia annual conference
Playing key climate change role Philip Hopkins
M
anaged forests can play a key role in meeting climate change’s net zero challenge through the carbon stored in wood products and bioenergy, according to one of Australia’s leading researchers. Professor Annette Cowie, senior principal research scientist in the NSW Department of Primary Industries, said forests (either native or plantation) contribute to reducing carbon dioxide emissions by producing wood products that displace emissions-intensive building products. “A global emitter analysis found that for each one tonne of carbon in wood products, you would have an emissions reduction of on average two tonnes ranging from one to three,” she said. Professor Cowie, Adjunct Professor in the School of Environmental and Rural Science at the University of New England, was addressing the annual conference of Forestry Australia in Launceston. FA is the new name of the Australian Institute of Foresters/Australian Forest Growers group. “You may have heard discussion on the accuracy of the substitution values. Value does vary depending on the products displaced. It’s important that you do the comparison apples for apples; you need to compare a wood frame versus a steel frame, rather than one
6
with existing infrastructure. for bioenergy. You may “Because it’s dispatchable, have even heard it said that biomass can play a strategic biomass is worse for the clirole in stabilising the grid mate than using coal,” she and allowing more rapid said. “And, in fact, it’s perfectly penetration of intermittent renewables. Bioenergy can true that if you look just at fill the gaps when solar and a pile of wood pellets and wind resources are low, es- compare that with a pile of coal, there’s more CO2 emitpecially in winter.” Professor Cowie said bio- ted per megajoule from the mass can provide other wood than from the coal. benefits such as in waste But that is simply a matter kilo of wood versus one kilo management, for example, of the chemical composidiverting wood waste from tion of those two materials. steel,” she said. “That is not relevant; your Professor Cowie said the landfills. 2019 IPCC report reconfirmed the findings of its 2007 study on the important role of forestry in cutting emissions. The 2019 IPCC report specifically stated: “Sustainable forest management aimed at providing timber, fibre, biomass, non-timber resources and other ecosystem functions and services, can lower greenhouse gas emissions and can contribute to adaptation (high confidence).” Professor Cowie said managed forests’ used forest biomass for bio energy. “Bioenergy is essentially a carDelegates at this year’s Forestry Australia in Launceston. bon neutral energy source as long as the biomass is NSW studies showed that system boundaries are too regrowing after harvest, wood products in landfill narrow if you’re just lookapart from any fossil fuel had essentially no decom- ing at the pile of wood chips emissions that you might position after more than 50 versus the pile of coal. use along the supply chain,” years. “When you burn biomass she said. However, Professor Cowie for energy, you do emit the “Bioenergy is available said some reports claim carbon dioxide at the point now. The technologies are that bioenergy is bad for the of combustion, but it’s part available, the biomass is climate. “These studies em- of the short-term carbon available. It can supply a phasise the carbon depth of cycle - unlike burning coal, wide range of energy prod- bioenergy and long payback which takes carbon that was ucts, it can be integrated times when you use forests stored perfectly safely un-
•
Australian Forests & Timber News December 2021
derground and puts it into the atmosphere.” Professor Cowie said some negative findings emphasised the spatial scale of the assessment. They argued that starting the clock at the time of harvest, with a single stand, consumed all the biomass bioenergy, putting the CO2 back into the atmosphere immediately. “It takes time for the forest to regrow, hence the consideration of a carbon debt,” she said. “But a forest is managed as a series of stands that are harvested each year so that you can supply a continuous supply of wood products. So, in fact, across the whole landscape, if you have a socalled normal forest, you’ll have a constant carbon stock and you won’t see this phenomenon of a carbon debt.” Professor Cowie said another explanation for negative views on bioenergy was the assumption that all of the harvested biomass would be used for bioenergy. “But in fact, most biomass comes as a by-product from forestry operations. When you harvest trees, only a fraction of that above ground biomass is suitable for solid wood products, and there is wide a large amount of biomass that could be used for bioenergy,” she said. “Studies in NSW have found that 40 to 60% of the above ground biomass is residues.”
www.timberbiz.com.au
Forestry Australia annual conference
Wildlife is protected Philip Hopkins
R
esearch by VicForests shows that the new variable retention harvesting systems are protecting wildlife, with species found in and around completed harvest areas. The research was conducted over two years to assess whether arboreal species such as Leadbeater’s Possum and Greater Glider are surviving after coupes have been harvested and regenerated. The research findings were outlined by VicForests’ silviculture scientist, Mike Ryan, to the Forestry Australia national conference in Launceston. FA is the successor body to the Institute of Foresters Australia/ Australian Forest Growers group. Mr Ryan said aboreal species were found in post-harvest coupes within five to 10 years of logging. “Arboreal species are still present on or adjacent to most sites. In surveys to date, we’re still finding a presence in sites harvested five to 10 years previously when suitable habitat is retained,” he said. “Variable retention harvesting is difficult to burn (post-harvest), but it can be done. And there are considerable challenges still delivering the required timber to sawmills,” he said.
Mr Ryan said silviculture had traditionally been a clear-fell system in post1939 regrowth Ash forests. “The sites have been burned; that allows the seed fall to regenerate the sites,” he said. This type of silviculture worked well for delivery of timber, but “may have some limitations for some wildlife”. Mr Ryan said the new approach centred on increasing the retention of large numbers of habitat trees. “We have either moderate or higher levels of retention according to the habitat trees on site,” he said. The coupes became a mosaic of retained forest areas. Each of these systems had different implications for wildlife. Mr Ryan cited an area around Powelltown in West Gippsland where he was involved in coupe harvesting and planning of 1939 regrowth. Pictures of the coupe over 20 years showed the successive waves of regrowth. In 2004, high quality Leadbeater Possum habitat was retained at the edge of the coupe where there were large old trees and an area also suitable for other species. Now, in one area, researchers had found five Leadbeater possums in a
• Delegates to the Forestry Australia Annual Conference during a field trip in Tasmania. one-kilometre transect, he said. Mr Ryan said landscape context had to be understood, as the harvest area was surrounded by a sea of forest. Forest change could also be dramatic at the local scale. For example, the 2021 windstorm event that went through parts of Victoria flattened some forest areas. Mr Ryan said that at Wallaby Creek, old growth forest was burned completely during the 2009 bushfire. Ten years later, the sea of dead trees had become a sea of young regrowth. “It’s going to be excellent quality habitat because you’ve got both the nest trees and the foraging habitat,” he said. One survey at Connors Plain was outside the current known distribution of the Leadbeater’s Possum. “It was quite exciting to be able to get detections up there,” he said. In a selection harvest area in the Strathbogies, within three transects of 500 me-
tres, “we’ve had 130 Greater Glider detections over the last nine surveys”. “And we’ve had excellent wildlife outcomes,” he said, including koalas, Mountain Brushtail Possums, ringtail Possums and Feathertail Gliders. Greater Gliders were found at different detention harvesting coupes in Toolangi forest, while Leadbeater’s Possum were detected in adjacent 2009 fire regrowth. Mr Ryan said under adaptive harvesting, Greater Gliders were found on or adjacent to most harvest areas provided there was no crown scorch. “Gliders are still on sites harvested five to 10 years previously, provided we’ve got suitable habitat retained. We did have one site, which was burned too hot and Gliders will not return to that site until you’ve got full crown re-establishment,” he said. Regarding Leadbeater’s Possum, “there’s foraging in harvesting regrowth after six years”. “We’ve found
them living in fire-killed ash forest, nine years post-2009. They’ll be in there before then. But that’s when we first found them,” he said. “We found one nesting in a 34 centimetre silver wattle in 28-year-old regrowth.” Mr Ryan was questioned by Victorian Forest Products Association chief, Deb Kerr: what was the future of the Leadbeater’s Possum when native forestry ceased in 2030 and the possum’s preferred habitat was not being sustainably regenerated through harvesting? Mr Ryan said there were still considerable areas burned in the 2009 bushfires. “That is going to be the mainstay of the Leadbeater’s Possum for the next couple of decades at least,” he said. “We will get future fire events as well. They will still be present in those other forests… I’ve found the greatest density certainly in that 2009 post-fire regrowth, especially when you’ve got large numbers of dead trees.”
Research investment is needed
I
n the session ‘Forest health and biosecurity – a good news story’ leaders in the field of Australian forest health and biosecurity came together to highlight current research projects and discuss broader implications for the forestry industry. Jodie Mason, Forest Research Manager at Forest and Wood Products Australia, spoke about the need for increased investment in forest biosecurity and forest research. Research and development funding has decreased
www.timberbiz.com.au
by 80 per cent in the past decade and the number of forest researchers has decreased by 95 per cent, according to Australian Forest Products Association figures. To address these issues, Ms Mason worked with a group of FWPA members, through the Grower Research Advisory Committee, and developed eight investment plans to inform and promote investment in forest research, development and extension. The investment plans were finalised with a budg-
et of $53 million over five years, which could deliver a $700 million financial benefit to the industry. Over $10 million has already been invested in identified priority projects, with funding from industry and the Australian government. One plan, the damage agents investment plan, focusses on agreed priorities for forest health and biosecurity research. It includes environmental influences like drought and heatwave and long established physical pests like sirex, leaf
beetle, eucalypt weevil and browsing animals, as well as newly established pests such as mrytle rust and giant pine scale. “The damage agents investment plan identifies RD&E priorities to address current and emerging forest health and biosecurity issues. Tackling these threats is essential for the Australian forest industry to thrive. It’s great to see the industry taking up the challenge with increased levels of investment in these areas,” Ms Mason said. In a project funded by
Australian Forests & Timber News December 2021
FWPA, looking at the biological control of the giant pine scale (a sap-sucking insect also known as GPS) in Australia, Greg Lefoe, from Agriculture Victoria, detailed the risks and benefits of introducing a specialised predator species, Neoleucopis kartliana, from its native Greece. Research indicates that if approved the predatory fly could be a “long-term, cost-effective and environmentally friendly management option for GPS in Australia”, according to Mr Lefoe. 7
Forestry Australia annual conference
Forestry Australia conference dinner 1. Carmen Windsor and Linda Crawford from Sustainable Timber Tasmania. 2. Jim Wilson and Bella Walker. 3. Bob Gordon (left) and Jerry Leech, Principal, Forestry Systems, SA. 4. Bassie Yizengaw Limenih, Julianne O’Reilly-Wapstra and Folarin Faluyi. 5. Michael Schofield, Mitchell Raspin and Tony Price from Midway. 6. Conference attendees at the conference dinner. Pictures: Forest Practices Authority Australia
4
1
2
3
5
6
DON’T MISS A THING
Australia's leading timber industry web portal
TIMBERBIZ.COM.AU 8
australasian
Brought to you by
Australian Forests & Timber News December 2021
www.timberbiz.com.au
I n c o r p o r a t i n g A U S T R A L A S I A N F O R E S T L O G G E R & S AW M I L L E R
magazine
www.timberbiz.com.au
www.tigercat.com
Wide
Durable Tigercat bogie axles – front and rear
UNMATCHED PRODUCTIVITY. UNMATCHED RELIABILITY.
Optional factory fitted fire suppression system Dasa Forester F30 Data management system
The Tigercat 1075C forwarder delivers unmatched productivity and reliability. Features such as the FG43 grapple and the hooked crane set Tigercat apart from the crowd. Careful engineering along with solid construction ensure Tigercat forwarders are the best choice for the toughest conditions.
Contact Onetrak today to learn more.
In the news BRIEFS $9m VFPA CHAIRMAN HVP’s Rob Hescock has been has been elected the new chairman of the Victorian Forest Products Association. He replaces Tony Price who has stood down due to his pending retirement in early 2022. Mr Hescock represents the softwood plantation sector having worked in the industry across Victoria for many years. Currently he is the Chief Operating Officer for HVP Plantations.
MCCORMACK REAPPOINTED Long-serving Australian Forest Products Association chairman Greg McCormack will continue in the role alongside a reaffirmed board of directors. AFPA also confirmed at its 2021-2022 Annual General Meeting yesterday Jean Yves Nouaze (Deputy Chair), Ian Telfer (Treasurer), Diana Gibbs, Jon Kleinschmidt, Stephen Dadd, James Malone, Jessica Douglas, Mark Rogers, Craig Dunn, and Steve Whiteley, as the new AFPA Board for 2022-2023. FORICO BOARD Hobart-based Tracy Matthews and Beth Mathison have been appointed for a three-year term to the Forico Board. They are both Fellows of the Australian Institute of Company Directors, and each bring decades of experience from private, government and not-forprofit enterprises, both locally and abroad. BLASKETT APPOINTED Ms Debra Blaskett has been appointed as the new Chair of the Forest Products Commission (FPC). Ms Blaskett, who has served as an FPC Commissioner since June 2021, brings to the role extensive experience as both a non-executive director and senior executive working across a range of industries including aviation, maritime ports, tourism and Commonwealth Government administration and regulation. SAFPA CHAIRMAN Tammy Auld of Timberlands Pacific has been elected chairman of the South Australian Forest Products Association. 10
RT
Federal boost to support forestry growth A ustralia’s nine Regional Forestry Hubs have received a $9 million funding boost to support growth in the forest industries. Spread out for the next four years, the funding is part of a $10.6 million national investment will help finance the existing forestry hubs around Australia, as well as establish two new hubs in Eden in New South Wales, and in the Northern Territory. Minister for Agriculture and Northern Australia David Littleproud said the Australian Government’s investment in the Regional Forestry Hubs was a show of faith in our forest industries and the benefits that they deliver for regional communities and the Australian economy. “The Australian Government is providing more than $10.6 million over 4 years for existing Regional Forestry Hubs and the establishment of two new hubs in Eden NSW, and the Northern Territory,” Mr Littleproud said. “We are committed to delivering positive outcomes
“We are also working towards enhancing the overall community awareness and understanding of forestry. “We have a unique and sustainable industry in WA and this funding will assist in developing it even further.” Federal Member for Forrest Nola Marino MP said this new funding secured the future of the South West Timber Hub and its important work within the industry especially given the recent State Government announcement. South West Timber Hub Project Manager Wendy Perdon “The hub is assessing prowith Federal Member for Forrest Nola Marino duction forestry resources, for the industry Australia- funding was a much-needed processing capacity and inwide and are backing those confidence boost for WA’s frastructure needs and limitations and finding ways who rely on the productivity forest industries. “This funding extension to support innovation and of the sector every step of will allow the South West growth in our region,” Ms the way.” “These key forestry ar- Timber Hub to build on the Marina said. “South West WA is a key eas across the country have valuable projects currently strong potential for growth being undertaken, which forestry area with strong for growth and innovation, with skilled are designed to strengthen potential innovation, with forestry workers, trans- and grow WA’s forest indus- and skilled forestry workers, port routes and processing tries,” Mrs Perdon said. routes and “These projects include transport plants,” Mr Littleproud said. Australian Forest ProduAs- focal points like ecological processing plants. This sistant Minister for ForeW- thinning for forest health funding will help the estern Australia’s South West and private forestry, both of local industry to meet the Timber Hub Project Man- which are extremely impor- challenges and timber demands of the future.” ager Wendy Perdon said the tant to industry.
•
Softwood estate remains stable, hardwood declines
Ce
Continued from page 3
hurdle, which is why Victoria’s Forestry Hubs are looking at options to not only expand our plantation estate, but also to use innovative manufacturing solutions to make our available timber go further. “In the Green Triangle we are actively looking for new opportunities to stop the plantation decline and optimising existing fibre use,” Liz McKinnon, Executive General Manager of the Green Triangle Forest Industries Hub, said. “The Hub is looking to establish partnerships with farmers. We want to incentivise landowners so they can incorporate commercial tree farming as a new business opportunity”, Ms McKinnon said. However, the benefits of increasing the plantation estate to close the supply
G B
• Liz McKinnon
and demand gap were important with the future for our climate depending on more trees in the ground. “If the sector plants one billion new trees nationally over the next ten years, those trees will store an esti-
“But in the case of our current climate crisis, part of the solution is right in front of us,” she said. “Trees remove carbon from the atmosphere and continue to store it for their lifecycle and in the harvested wood, wood fibre and Deb Kerr pulp and paper products. “More trees equal less carmated additional 200 megatonnes of carbon dioxide bon dioxide in the atmosper year by 2050,” Ms Kerr phere. The Victorian Government needs to work with said. “Sometimes, we look for all stakeholders to get the complicated, expensive op- right trees in the ground, at tions to tackle difficult prob- right scale and in the right areas,” Ms Kerr said. lems.
•
Australian Forests & Timber News December 2021
www.timberbiz.com.au
S
A A ha ou
S
t
1
RTO 90003 | CRICOS 00591E | HEP PRV12049
Certificate III in Saw Technology FWP30719
Certificate III in Harvesting and Haulage FWP30216
Skill Set for a Plantation Forest Operator FWPSS00018
Certificate IV in Forest Operations FWP40116
Chainsaw Operations
Grow something meaningful. Be part of a more sustainable Australia. Study Forestry and Timber courses At TAFE NSW, we’re excited about the future for cultivators. Whether you want to prepare a more sustainable Australia, help regenerate our native forests or learn to harvest and haul timber in a viable manner, TAFE NSW has the timber and forestry course you need to put you a cut above. Taught by industry-expert teachers, our nationally recognised courses will give you the hands-on skills you need to cultivate a fulfilling career. Semester 1, 2022 courses are now open for enrolment but they are filling fast, so don’t miss out.
tafensw.edu.au 131 601
Profile BRIEFS OPERATIONS COMPLIANT An independent audit of VicForests has found its operations to be 95 per cent compliant overall and better than that in the five key environmental compliance areas. VicForests said that as a result of the 2019-20 audit, it would continue to increase its focus on improving road design, road construction and infrastructure in its harvesting operations. MILL INVESTMENT OneFortyOne will invest $11 million dollars in its Kaituna Sawmill in New Zealand over the next three years. The investment consists of three major projects to increase the sawmill’s drying and treating capacity. The project will begin in April 2022. PARROTS RETURN Pro-active monitoring and on-ground expertise from Sustainable Timber Tasmania has confirmed that migratory swift parrots have returned to search for nest sites in forests on the east coast of Tasmania. As a result of extensive monitoring, Sustainable Timber Tasmania has temporarily ceased forest harvesting operations in one of its harvesting areas RU034B, on Permanent Timber Production Zone land located in Tasmania’s south. SAFETY STRATEGY More fatigue risk management options, targeted compliance activities and promoting safer, cleaner and efficient heavy vehicles are some of the key initiatives to be delivered under the first year of the NHVR’s five-year strategy for heavy vehicle safety. The Heavy Vehicle Safety Strategy 2021-25 and supporting Action Plan 2021-22 was developed in consultation with a wide range of government, industry and safety advocates. The Strategy contains three guiding themes that have been driven by industry, including creating positive change in individual behaviours and culture, driving uptake of a modern, safer heavy vehicle fleet, and influencing road network design and use to support road safety. 12
Thirty-six years and counting for Brad S traight out of school, and only 16 years old, Brad Dowdell thought he’d give his first fulltime job a couple of years and see what happened. Thirty-five years later, after a long career adapting to and embracing change, Greenmill Operator Brad has shared some of his story. “My first fulltime job was out at Lakeside,” he said. “I was 16, I came straight out of school and thought I’d give this a couple years and see how it panned out. “I’d done nightfill at Woollies before but immediately knew this job was going to be a little more full on,” he said. “I went up to shake the boss’s hand and he said ‘you’re not in school now, there’ll be no stuffing around’.” That was his first day. “I destacked packs of timber and put them into orders. After a year-and-ahalf, I moved into the sawmill where I started on the stacker, and within another year after that I was inside the mill working on the main machines,” Brad said. “Eventually I was running one of the shifts out there. I transferred here to Jubilee in 2013.”
So what has changed in those 35 years at the mill? “Safety has been a big thing I’ve seen improve over the years,” Brad said. “When I started there were no fences or guards around the machines, it was just word of mouth – ‘you don’t go in there’, or ‘you’ll
be right young fella, we all do that’ and I’d be like “really!? “I can’t imagine the mill like that now. Back then it was normal, but thankfully now it’s pushed more and more to get everyone home safe.” The change was hard to adjust to but once he got through it, he found more often than not it was all for the better. “I was at Lakeside for what must have been 26 years. I was at that place for so long, I didn’t want to move, I had a fair bit to do with that mill,” Brad said. “For some people it was a
Australian Forests & Timber News December 2021
difficult transition. It took a couple of years to get used to it and there was a lot to learn. “I almost left, but eventually I settled in and felt better as you could see that things were going forward. We’re a team – like a footy team really – everyone does their role, everyone is equally important and the operation won’t run without working together,” he said. “You might have bad bits of the day, but you just go on to the next one and have another go. “It’s pretty good here, I’ll give it another 35 and see how that pans out.”
www.timberbiz.com.au
In the news
Give our forests a carbon value Philip Hopkins
G
iving forests a carbon value can drastically change the outlook for plantations and regional economies, but companies must work with local communities to avoid a backlash against largescale planting, according to an Australian forestry leader. David Brand, the chief executive of New Forests which among its operations includes softwood sawmills in Bell Bay, Tasmania, and Tarpeena, South Australia, and sales and distribution facilities in Victoria, South Australia and Western Australia, said land-use changes that brought more trees into the landscape were “climate friendly”. “We must do that with communities, not in opposition with communities, so that we have a shared value in the outcome,” he said. Mr Brand made these comments in an address on plantations’ role in the transition to net zero emissions. He was speaking to a national forest industries symposium held by the Australian Forest Products Association. New Forests, based in Sydney and established in 2005, manages $6 billion in assets locally and internationally – in forests, rural land, timber processing, carbon projects and conservation, including major sawmills at Tarpeena in South Australia and Bell Bay in Tasmania. Mr Brand said a carbon price fundamentally changed the economics of tree growing, which had huge up-front costs, a long wait time for financial rewards and less liquidity than agriculture. Now, as trees grew and removed carbon dioxide from the atmosphere, this started to create a cash
• New Forests CEO David Brand yield. “As the carbon price rises, the economic value of the land starts to rise with forestry,” he said. However, the trend could create controversy, as in New Zealand, where the carbon price had gone from $NZ20 to $NZ50 in 18 months www.timberbiz.com.au
• New Forests’ Timberlink mill at Tarpeena in South Australia. when land was bought for pine plantations. This had created negative attitudes from farmers, who complained that companies were taking up productive farmland and planting for trees – a bit like the MIS (managed investment schemes) in Australia. “We try and talk to farmers, try to understand their motivations and their views on forestry. They have a negative view in general against forestry, a hangover from MIS era. Forestry is difficult to understand; markets can be more consolidated than in agriculture, and farmers are not homogeneous,” he said. “How we go ahead will vary depending on which group of farmers we deal with, and what their motivations are.” One may want to retire and exist with dignity; others may work parttime in town and may lease some of their farm for stable income; while others may be innovative and take more additional exposure to forestry and carbon market. “They may look at the whole farm and how they can optimise by integrating agroforestry, carbon markets and become a carbon-neutral farm,” he said. Mr Brand said plantation forestry was on the cusp of expanding but would not occur through conventional broadacre buying. “It will be more nuanced - parts of the farm, some agroforestry, a lesser productive part of farms may be forested, revegetation of riparian zones, back areas – that’s the kind of model,” he said. “My mentality is to end up with landscapes that will encompass conservation, forestry and agriculture integrated together. We hopefully will organise landscapes in an economically efficient way – forestry hubs with processing infrastructure and other more remote
areas, for more conservation value. That’s the sort of landscape we will create - widely spaced trees with grazing underneath – a beneficial land use.” Mr Brand said sophisticated carbon markets had different carbon credit values for different aspects,
Australian Forests & Timber News December 2021
such as conservation. “We want to have both production and conservation of landscape – that is the end game we want to promote,” he said. Australian forestry had positive tailwinds. “When we started to invest a decade ago, you could have bought the entire sector - plantations and processing - for $A5 billion. Now it would cost $20 billion,” he said. Mr Brand said a factor in this growth was the rise of sustainability and climate concerns. This included forestry’s role in the emerging circular bio-economy. “There are amazing shift in markets and rising opportunities. Climate change is a driving force,” he said. Stora Enso in Scandinavia recently said that 70 per cent of their profits come from products they did not make 10 years ago. With net zero emissions 2050 and taking on aggressive targets for 2030, major corporations and investors with trillions in assets were realigning their invest portfolios and creating “opportunities for the forestry sector”.
13
Silviculture
Softwood trials for Australia’s north A softwood timber project that could help Northern Australia’s graziers create an additional income stream is being evaluated by a research collaboration. The three-year Silvopastoral trials for commercial pine systems in North Queensland project is the focus of a new Cooperative Research Centre for Developing Northern Australia (CRCNA) research collaboration. The project is being led by Timber Queensland and brings together forestry and livestock production experts and environmental and carbon consultants to assess potentially transformational farming systems. Key research partners include the Queensland Department of Agriculture and Fisheries, CQUniversity, HQPlantations and CO2 Australia. Given the high-level of innovation involved, the project has attracted a range of funding supporters including the CRCNA, Timber Queensland, HQPlantations and Forest and Wood Products Australia through its voluntary matching program.
young softwood pine plantation • Silvopastoral trials of timber in Far North Queensland.
Timber Queensland’s CEO Mick Stephens said the project would assess the economic merits of combined grazing and commercial tree farming systems compared to traditional forestry and grazing only practices. “There is a high likelihood these silvopastoralism systems can deliver higher net financial returns per hectare for suitable land types, while at the same time contributing to income diversification and lower overall carbon emissions, or even carbon neutral outcomes for the farming enterprise,” Mr Stephens said. The project will measure and model the returns from field trials with cattle grazed
The principals and benefits of silvopastoral systems are understood from overseas experience, to unlock the full productive potential for timber and beef we need to assess treepasture systems relevant to Northern Australia. in widely spaced commercial pine forests and compare the returns from carbon sequestration and combined timber and beef production returns with traditional grazing only activities on cleared farmland. CRCNA CEO Anne Stünzner said this project builds on recommendations made in the CRCNA’s Northern
Forest and forest products industry situational analysis, which aimed to deliver a pathway for realising forest industry potential in Northern Australia “The principals and benefits of silvopastoral systems are understood from overseas experience, to unlock the full productive potential for timber and beef we need
to assess tree-pasture systems relevant to Northern Australia,” she said. In addition to technical field work and trials, the project team will work to keep the forestry and livestock industries up-to-date with key research findings to inform investors and landowners on the benefits of these novel systems.
Seeing through the eyes of a sirex wasp
N
ative to Europe, Asia and Northern Africa, the sirex wood wasp was first detected as an invasive species in Tasmania in 1952 and was accidentally introduced to mainland Australia in 1961. Plantation radiata pine and other pine species have proven to be particularly susceptible to wood wasp infestations. Between 1986 and 87, it was found that when left unchecked, the financial damage the sirex wood wasp inflicted could total between one and four million dollars. Around the world, the
14
total loss to trees from sirex wood wasps amounts to about $70 billion per year. The good news is science may have an answer! Most insects like wasps can see green, blue and ultraviolet, and are attracted to pleasing colours. Meanwhile, pheromones are chemical smells that provoke specific responses, for instance many animals use pheromones to attract mates, again including wasps. Quentin Guignard, a researcher from the University of Pretoria in South Africa, is conducting research which places electrodes in
the wasp’s antennas and eyes, to monitor the electrical currents transmitting to their brains. These observations will help determine which specific pheromones
to attract the sirex wood wasps away from pine trees and exterminate them. This approach takes advantage of the insect’s natural instincts to travel towards a potential mate or certain colours. This research is one small part of a global effort by scientists to protect trees and crops from invasive species. Here in Australia, the biological control agent and colours the sirex wood Beddingia (previously Dewasps can perceive, and ladenus) siricidicola has been mostly successful in how they react to them. With the data collected, sterilising the female wood Guignard hopes to be able wasp and suppressing mato develop targeted lures jor outbreaks.
Australian Forests & Timber News December 2021
www.timberbiz.com.au
Finance
Lockdowns, unemployment and the effect on interest rates Richard Jefferies Jade Finance Australia
A
ustralia is currently in a fast-moving and evolving COVID-19 scenario with the eventual outcomes unknown at this stage. The extended lockdown in NSW especially the 14 day pause to the construction sector was something very few expected. There is a lot of information, data, commentary and opinion, both qualified and unqualified, to digest. So much so that some may have missed the significance of, or even the announcement of the latest unemployment figures. Over recent months the unemployment figures have continued to defy predictions and have moved steadily in a downward direction. Normally these announcements are heralded as major wins by the Federal Government. But in this case, the announcement coincided with the Greater Sydney extended lockdown and outbreaks and snap lockdowns in other states. While no doubt pleased, Treasurer Josh Frydenberg appeared cautious and subdued in discussing the figures. The figures – unemployment has dropped to 4.9%. Significance to business? The link between unemployment levels and interest rates! Specifically, the costs of securing equipment finance and other business loans. We explain how current unemployment figures and the effect of lockdowns may impact interest rates and potentially your costs of finance. While unemployment has dropped over the past few months, the 4.9% figure has particular significance. A sub 5% unemployment figure has long been touted as one of the indicators for the RBA to trigger a rate rise. During the early part of 2020 it was expected by many that unemployment could reach in excess of 10%, especially after the conclusion of the JobKeeper program. The RBA cut the official cash rate as part of their stimulus response to the early stages of the pandemic to the current historic low of 0.1%. The cash rate is a major determinant for banks and other lenders in establishing their own interest rates across their lending portfolio. Lenders and borrowers closely follow the RBA decisions and our www.timberbiz.com.au
team especially analyse the statement issued by the RBA Governor, Dr Philip Lowe following each announcement. These announcements over recent months have included consistent messaging – that the RBA Board is looking for unemployment to be sustainably lower and inflation to be in a range of 2% to 3%. The target unemployment has been tagged at below 5%. So now that it is sitting at 4.9% will that trigger a rate rise? No. Inflation is still sitting in the 1% range and Dr Lowe has repeatedly said he was not expecting to raise rates till 2023/24. It is considered that the unemployment target figure could even now be less than 4%. What will potentially interrupt the downward trend in unemployment is the extended lockdown in Greater Sydney, Central Coast and Illawarra. Significant numbers of both individuals and businesses have applied for support through Service Australia and Service NSW. At least an ad hoc indication of the hurt being felt by the lockdown. Any impact on actual data will not be revealed for several weeks. Any push up in unemployment could push out any rate increase date. But 2024 is still several years away. The impact on interest rates of repeated lockdowns, noting that Victoria has just emerged from a fifth lockdown and areas of NSW is into the fifth week of one, is less clear. The impact on business will be clearer in coming weeks but not fully appreciated until lockdowns are lifted and the degree of bounce back can be assessed. A drop in overall growth/GDP could delay any rise in inflation and as such keep rates at current low rates. What is probably more significant in regard to lockdowns and interest rates is how individual lenders will assess individual loan applications. Typically, lenders will take into account the strength of the business moving forward and may consider any potential exposure to the effect of lockdowns. As an example, the construction sector was previously allowed to operate during the NSW 2020 lockdown. But in July 2021, a 14 day halt to all construction activity was a surprise move by the NSW Government. This may, as the saying goes, throw a spanner in the works for business lending. The complex nature of the impacts which determine interest rates including the unpredictable factors around COVID-19 highlight the importance of adopting a highly professional and expert approach to sourcing equipment finance. Businesses taking on the task themselves rather
COVID-19 has highlighted the importance of adopting a highly •professional and expert approach to sourcing equipment finance. than engaging experts such as Jade Equipment Finance face the possibility of missing out on cheaper rates and a better finance deal. The benefits of using our brokerstyle service are clear, proven and very real. With our vast accreditations with both the major banks and a multitude of non-bank lenders, including specialists in equipment finance, we can offer more choices, more quickly and more efficiently.
Jade Finance’s consultants are fully trained and have the direct, industry connections to negotiate with the decision-makers in our lender organisations. Presenting our individual customer applications to the lenders and using our strong bargaining power to achieve the best outcomes. www.jadeequipmentfinance. com.au/blog/lockdowns-unemployment-and-their-effect-on-interest-rates/
GREEN TRIANGLE Finance & Leasing Pty Ltd
EQUIPMENT FINANCE VEHICLE FINANCE TRUCK & TRAILER FINANCE 41 Helen Street Mount Gambier SA 5290 Ph: 08 8724 7333 Fax: 08 8724 7344 Email: admin@greentrianglefinance.com
Australian Forests & Timber News December 2021
15
All the modules were relevant to my current job and will help me broaden my skills and knowledge so I am able to make better decisions and help grow the company I work for.
Machinery New home for RDO in Tassie
R
DO Equipment, Launceston’s local John Deere construction and forestry and Vermeer equipment dealer, has opened its new flagship Tasmanian dealership this week, creating more jobs and opportunities for customers in the region and across the state. The new dealership is expected to contribute millions to the local economy through the $8.5M facility, offering employment opportunities and increased capacity to service more machines not only at the new branch, but remotely via its field service division. RDO Equipment’s new CEO, Phil Canning, says this new dealership means big things for local customers, and reflects the Group’s strong commitment to embedding itself in the Australian market. “We now have greater capacity for not only more equipment in stock, but more parts on shelves and service support, all with a real focus on maximising our customers’ uptime,” Mr Canning said. The new branch has moved 10 minutes down the road from the existing premises on Montague St, Invermay, to Australis Drive, Rocherlea and offers a much larger space for servicing and holding machines and parts. The new branch expansion also means a bigger focus on career development opportunities, with more training resources available for existing staff and new starters. “With a larger footprint in the region, we will be looking to invest more into training and development for our employees, and also investing in a strong apprentice program. We want to be bringing in more up-and-comers and help develop their careers throughout RDO Equipment in these exciting industry sectors,” Mr Canning said. The opening of the new branch was celebrated with a Covid-safe event attended by local customers, industry leaders and staff, as well as Mayor of Launceston Cr Albert van Zetten.
18
Multi-purpose equipment to fight fires A
ny purpose-built equipment in forestry requires a substantial financial commitment. It is important that all equipment acquisitions are used to their full potential. Ponsse’s innovative engineering team have once again developed a solution that optimises equipment usage allowing it to perform multiple activities when required. In a design collaboration with emergency fire services and Ponsse engineers Ponsse firefighting equipment was born. It allows for machines to be successfully used in different activities such as wildfire fighting, extinguishing fires from slash burning operations or be converted back into the original intended use as a conventional forwarder for timber haulage. Ponsse has designed and manufactured a forwarder mounted firefighting solution that takes advantage of the superior travel capabilities of the Ponsse Buffalo and Elephant forwarders. This has resulted in an extremely capable forwarder with firefighting capabilities and the ability to fight fires in extreme terrain where most firefighting equipment can’t reach.
Firefighting equipment is easy to retro fit to new or existing Ponsse Buffalo and Ponsse Elephant forwarder models with minimal changes to the forwarders’ hydraulics. The 10m3 lightweight aluminium tank is simply lifted into the load bay of the forwarder with the forwarders own crane and then it is simply a matter of connecting the Hydraulics. It is quickly and easily ready for use. The 10,000-litre tank is
filled by its own hydraulic pump. It can be filled from a lake, river, tanker or from another fire truck. The water cannon is fed by a centrifugal spray pump and has a 360°coverage with a maximum range of 47 meters. A handheld remote control guides the direction, height, and the nozzle. It also allows for the simultaneous use of a handheld hose and the water cannon. The Ponsse forwarders can be used in its primary forwarder role whilst being able to be easily converted to fight fires if the need should arise without the extra expense of a needing a standalone fire fighting
Australian Forests & Timber News December 2021
Key Points length • Dimensions: 5150 mm, width
• • • • •
2250mm, height 2200 mm Weight approx. 1500 kg Volume 10,000-litres Spray Coverage: 360° at up to 47 metres Durable lightweight aluminium tank. Corrosion resistant tank and pumping system.
machine. Added peace of mind. Another extremely economical and efficient solution from the team at Ponsse. Available through Randalls Equipment.
www.timberbiz.com.au
Chippers Death of scientist
Pictures: Callan Groth
D
Keeping mobile amongst the trees in Queensland F or Adan Taylor, working with the Bruks mobile chipper model 806.2 STC has been a bit of a learning curve. But now he is more than happy with the unit. “It took us a while to get our head around what was good and what was bad,” the general manager of GMT Logging at Imbil said. GMT runs two Bruks chippers – the 806.2 in the Toolara estate for HQ Plantations, and the earlier 805 model in the Beerburrum estate. Mr Taylor said he started off with some small private jobs while waiting for the HQ Plantations contract to begin. “We started to learn what we can and can’t do with it. And we broke a lot of knives,” he said. “We did a job to harvest and chip macadamia trees. And that was very tough on the knives. “So it was all about getting our head around what works and doesn’t work.” Bruks mobile chipper model 806.2 STC is a wood chipper to be used off road or at roadside for the production of fuel chips from forest residues. The chipper has a capacity to process full-length trees and logs up www.timberbiz.com.au
“And the key to any residue business is haulage. The Bruks chipper works to a diameter of 50 cm (Max. perfectly. It does a brilliant 40 cm for hardwood) as well job of small and short, fat, skinny - all the off cuts that as brushwood. GMT Logging’s 806 is cur- you’d expect coming out of rently undertaking harvest a harvest operation.” Mr Taylor said the 806 did residue work at Toolara while the 805 is doing the a great job, but conceded same sort of work at the there was an “art form to feeding it”. Beerburrum estate. To enable full volume “In Beerburrum they have a high rainfall, so they get during operation and at quite a lot of woody under- the same time enable low transport height, the chip growth,” Mr Taylor said. “There’s almost as much bin is equipped with hyhardware does there is fine draulically foldable side panels. There is a rubber residue.” The chipper is attached to containment curtain at the a forwarder making it very rear, that is elevated by the side panels. There are also mobile. “We’ve learned the key to notches for parking the what we’re doing,” Mr Tay- crane into, or through the bin. lor said.
Key Points
height • Transport 2590 mm - 6400-6600mm • Length width - 2800• Transport 2950mm infeed table • Width 2100mm infeed - 850mm • Width Capacity - 100-200m3/h • Power Scania • engine - 500HPindustry
High lifting and side dumping yokes with 80 cm lifting height gives a displacement of the chip bin laterally to facilitate dumping into another vehicle or container.
• AFCA Chairman, Adan Taylor
Australian Forests & Timber News December 2021
r Charlma Phillips who recently passed away after a long illness was a well-known and respected Entomologist who worked in SA but also at a national level. Dr Phillips was an entomologist by training who was recognised nationally as a leading authority on the assessment and management of forest health. She was involved in the South Australian forest industry for the past thirty years, since her recruitment by ForestrySA in 1992. ForestrySA had advertised widely for an entomologist and interviewed two highly qualified applicants, one of whom, Charlma, was judged the best applicant. Much to their surprise they found that she was living on a farm twenty kilometres down the road. In her role as Principal Forestry Scientist with ForestrySA and later PIRSA, she provided advice on forest pests and diseases to South Australian forest growers, other government agencies and the public. In 1996 she published the definitive text on eucalyptus health: Insects, Diseases and Deficiencies associated with Eucalypts in South Australia, an essential foundation for the development of the eucalypt plantation estate. It remains the “go to” text for eucalypt plantation forestry and is still the most detailed that has ever been produced. She was of great assistance to blue gum growers in the early days and helped to get the first hardwood forest health group up and going in the Green Triangle. She was a respected leader of a number of different forest health related initiatives including the Green Triangle and South Australian forest health groups, and a significant contributor to national forest health groups. Charlma always maintained her academic interests and over the years supervised several PhD and Honours students at Southern Cross University, University of Melbourne and University of Tasmania as well as lecturing in Forest Health at Southern Cross University. 19
Grinders
Clearing the way with Vermeer’s horizontal grinders
RDO2303_Vermeer HG_460X145_1.indd 1 20
Australian Forests & Timber News December 2021
www.timberbiz.com.au
Grinders
I
f you’re looking for a horizontal grinder that can power through large materials like whole trees and large stumps, look no further than Vermeer’s HG6800TX horizontal grinder. According to Vermeer Australia’s National Specialist Technical Advisor, Steve Batchelor, the HG6800TX is built for land-clearing and pipeline right-of-way operations and offers a high-horsepower engine on a tracked machine with a compact design. “It’s a fairly powerful machine, and due to its functionality and features, it can handle both big and small materials,” Steve says. “The low side walls on the grinder are well-suited for feeding whole trees and other large objects with
It’s a fairly powerful machine, and due to its functionality and features, it can handle both big and small materials. less restriction, which reduces the need for operator interaction with the material, a great safety feature.” The feed roller in the HG6800TX can climb up to 1.27 metres, helping the machine to crush logs or stumps that need to be rolled, and allowing operator flexibility with different material types. Steve also says that one key thing that operators need to think about when using the HG6800TX is choosing which tips to use, as different types of material need different tip types. “Vermeer Australia has a
broad selection of grinder tips which allows you to choose the right tip to meet the demands of your specific job — processing waste faster and more efficiently. “Wide block tips are the most common within the industry and can be used for a variety of applications such as general land clearing, regrind and green waste. And the best part is they can be flipped over and used on the other side, basically giving the tip double the lifespan,” Steve says. “Wing tips on the other hand have quite a unique
• Vermeer’s HG6800TX Horizontal Grinder in action. design, with an overlay of a carbide compound that helps with processing large-diameter woody material, mostly over 2ft. The narrow centre section helps the tip pierce the log, then the wings clean out the remainder.” “A common configuration is wide block tips on the outside of the walls, then
wing tips in the middle. If you have green waste with a lot of chunky wood, it’s better to have wing tips to grind down the larger material more effectively.” To find out more about Vermeer’s HG6800TX Horizontal Grinder, contact your local team on 1300 VERMEER or visit www. vermeeraustralia.com.au.
VERSATILE. EASY MAINTENANCE FEATURES. BUILT TOUGH. Green waste, trees, logs – Vermeer Horizontal Grinders eat ‘em all for breakfast. And now, the latest models offer remote control systems that let one operator feed and manage the unit. These powerful machines are the result of decades of refinement – they’re a chip off the old block.
Call your local RDO Vermeer dealer on 1300 VERMEER.
www.timberbiz.com.au
Australian Forests & Timber News December 2021
11/11/21 2110:35 am
Harvesters
l The TimberPro •TL775D fitted with the
Quadco QB4400 Control Fall Bar Saw operating in the southern Otways.
Largest TimberPro gains momentum in forests K omatsu Forest has been successful in recent weeks with four new deliveries of the largest Timberpro tailswing track machine, the TL775D with three in Australia and one in NZ. All are working in large Radiata Pine and fitted with attachments such as the SouthStar QS600 harvester head, Woodsman CFH 1400, Quadco QB4400 and KF800 control fall saw heads. Interestingly there has been a very strong demand with the later control fall heads in Australia and NZ due to their ability to lay the larger felled trees resulting in a large reduction in stem damage. TimberPro developed the TL775D to cater for the larger trees found on the West Coast USA as well as Australia and New Zealand. It’s an upgraded 765 featuring a longer 5.3 metre track frame with 10 bottom rollers, 20% larger tilt frame and increased lift capacity. These upgrades coupled with the standard tether hitch, very high slew torque 154,191 Nm and 484 kN tractive effort makes for a very effective machine in big timber and tougher ter-
22
rains. In addition, there are three boom options covering most applications; harvester booms, feller booms and shovel booms. The most recent delivery was the TimberPro TL775D fitted with the Quadco QB4400 Control Fall Bar Saw delivered to Mark Venturoni of Kelmar Services Pty Ltd operating in the southern Otways. HVP had requested Mark to supply a unit with a Quadco QB4400 due to its ability to control the fall of bigger trees resulting with Above: The TN775D fitted with a SouthStar QS600 less stem breakage which harvester working around Mt Gambier. Below: The TL775D has been too common in fitted with a Woodsman CFH1400 working in the Napier the faster growing Radiata region NZ. in the Otways. This unit has been recently delivered and so far meeting expectations on less stem damage. Mark has a strong history with Komatsu Forest which started when working with his father John and uncles Laurie and Frank which later led to his purchase of two TimberPro TL765C’s and Komatsu 895 for a new HVP contract in nearly 2018. One of the TL765C’s was fitted with a Waratah 625C which has worked approximately
•
Australian Forests & Timber News December 2021
7,000hrs and the second unit was fitted up as a feller shovel fitted with shovel booms and a Satco 630E and has worked 4,500 hours. “It’s very early days” according to Mark as the operator is just getting started on the new TL775D, so we hope to get back to him sometime next year to check out an update. The other recent TimberPro 775D deliveries are; • TN775D fitted with a SouthStar QS600 harvester delivered to Tabeel Trading working around Mt Gambier. Tabeel already operate a TN765C with a Quadco 7320HT Shear working in Eucalypt with approximately 7,200hrs and a TL765D fitted with a Waratah 624C in large Radiata Pine with 7,000hrs. • TL775D fitted with a Woodsman CFH1400 delivered to D.G. Glen Logging working in the Napier region NZ. This unit will be tethered in the steeper terrains which is typical for this style of machine in NZ. • TL775D fitted with a KF800 Control Fall Head delivered to Tree Cycle Removals. The KF800 is the forerunner to the Quadco QB4400 designed by the legendary Paul Rosin. www.timberbiz.com.au
load up on productivity
Primed for productivity, Volvo log loaders are adapted to thrive in forestry environments. Delivering the performance and reliablity to work in confined spaces, reach high log stacks and tackle adverse terrain. The even weight distribution, logging counterweight and low ground pressure from wide low profile tyres provide outstanding stablity, traction and tipping load - making easy work of daily challenges and getting the job done.
volvo log loaders rise to the challenge
MEET THE TEAM:
L110H
18,560 kg / 190 kW
Images are for illustration purposes only.
L120H
19,640 kg / 203 kW
L150H
24,090 kg / 220 kW
L180H
27,060 kg / 245 kW
L220H
31,190 kg / 273 kW
Visit cjd.com.au for more information or call 1300 139 804
enquiries@cjd.com.au | Find us on Facebook, LinkedIn and Instagram BIG ENOUGH TO TRUST SMALL ENOUGH TO CARE
L260H
33,240 kg / 309 kW
Loaders
AKD partners with Volvo to improve efficiencies
F
ounded in Colac, Victoria, in 1955 by an association of local family-owned and operated businesses, AKD Softwoods is an integrated forestry and timber processing company. Today, it’s owned by four equal shareholders who’ve been involved in the business since its inception. “We’re proud to have built a 100 percent Australian owned business that’s internationally competitive, but also continues to have strong roots in the local community that’s been instrumental to our success,” AKD Softwoods said. AKD Softwoods has six sawmills across Victoria, New South Wales and Queensland that produce over 1,000,000m3 of timber products annually. It owns and controls over 10,000ha of radiata pine plantation, as well as three preservation businesses. AKD employs over 1,000 people and services a range of industries, including: timber wholesales; frame and truss manufacturers; retailers, as well as supplying treated roundwood products to the agriculture and viticulture sectors. ‘There are industry-wide challenges – supplying sufficient volumes of timber to meet the increased construction activity, for instance – that affect all operations. In the wake of the 2019 bushfires there
24
new Volvo L150H loaders at Tumut, which will be used in the log yards. The new H-Series wheel loaders feature state-ofthe-art technology, such as OptiShift, which combines Volvo’s patented Reverse By Braking (RBB) technology with lock-up, available from first to forth gear. When the operator changes direction the Volvo patented RBB function senses the loader’s direction and slows the machine by applying the service brakes automatically, while lock-up creates a direct drive between the engine and transmission. These unique technical advancements increase machine performance, improve operator comfort, extend machine life and reduce fuel consumption by up to 18 percent. “The Volvo L150H and L220H with log grabs are
versatile, robust loaders that will be used extensively in the log yards at AKD’s timber processing sites. We’ll also use them to unload sawlog deliveries and move debarked logs to the greenmill for processing into timber,” AKD Softwoods said. The Volvo L150H and L220H have been designed to be the workhorses of any operation. “Our customers want versatile equipment that, whatever the situation, they know they can rely on. They’re used in a wide array of operations across a range of different industries; while each customer has different requirements, they understand and depend on the quality that’s ensured as we’ve been market-leaders for decades,” Fernando said. The L150H and L220H feature Volvo’s unique Torque Parallel (TP) linkage, which delivers high breakout force and excellent parallel movement throughout the entire lifting range. This, combined with the Volvo attachment bracket, delivers greater machine flexibility and versatility. The world-class Volvo engine features advanced technology built on decades of experience that delivers high performance and low fuel consumption. The water-cooled turbocharger increases engine life, while the ideally-matched, allVolvo powertrain has been built to work together in perfect harmony. The Volvo design has been rigorously tested to deliver optimised
has been sawlog shortages. These challenges are compounded by strong lumber prices overseas, which is attracting timber stocks that would normally be imported to bolster the Australian market,’ AKD Softwoods said. The industry is currently experiencing shortages of quality sawlog to be processed into structural timber. “Volvo has a proven track record of manufacturing high performance, reliable equipment and machinery. We work with our customers to understand their operational requirements and we devise a solution based Above and below: The Volvo L150H and L220H with log on what they tell us,” Noel grabs at work for AKD Softwoods. Fernando, CJD Equipment Regional Sales Manager said. AKD Softwoods have a long history of using Volvo loaders and currently operates a range of wheel loaders with various attachments: loader buckets, forks and log grapples at different sites. They recently took delivery of three new Volvo L150H and L220H wheel loaders at Colac and will soon take delivery of two
•
Australian Forests & Timber News December 2021
performance, high productivity, low fuel consumption and superior reliability. “We operate them all the time with the log grab attachments, but we also use them in other configurations across different sites,” AKD Softwoods said. The attachments are designed as an integrated part of the wheel loader and, with a wide variety of options, Volvo customers can adapt their machine to access more applications. “Volvo and CJD strives to be the benchmark against which other companies rate themselves. This is obviously challenging, but it is also one of the reasons we are constantly improving our offering to our customers, whether it be introducing new technology to the market or expanding our service network,” Fernando said. “AKD Softwoods has a long relationship with Volvo and CJD that stretches back years. They supply us with parts and provide specialised servicing for all the loaders. In 2018, we expanded the business and acquired additional sites. These had existing lease and servicing arrangements in place with CJD Equipment, which ensured a smooth transition,” AKD Softwoods said. “Volvo loaders are a vital part of what we do. Over the years, we’ve developed a strong business relationship with CJD Equipment built on a shared vision and close collaboration. Everyone knows that when they buy a Volvo loader they’re getting a world-class product, but equally as important is the after market service and support. Whenever we have a request and enquiry, we know we can rely on the CJD team to respond promptly and efficiently.” CJD Equipment has a network of branches and service centres that stretch across the nation, from Australian capital cities to regional country towns. This comprehensive network takes advantage of local knowledge, combined with its global experience, to support its customers. www.timberbiz.com.au
Loaders
Randalls going to new heights with Sany T o better service customer needs, Randalls Equipment expanding on its range of log loaders and can now offer the Sany wheeled material handling machine range. The Sany Wheeled Series machines are a favorite in warehouses, ports and Log yards all around the world. Numerous core technologies promote its outstanding performance. Energy control technology, anti-rollover protection, malfunction protection and real time data display contribute to its safety and high working efficiency. With 2 models ranging from 30T-50T these loaders offer many features synonymous with the Sany brand of equipment. Great fuel consumption, strengthened structural members, and multi-functional configuration make the Sany material
Key Points
handing machines a great alternative. With power, versatility, efficiency, and reliability, the wheel material handler series machines are a light, flexible, stable, and efficient option when it comes to log loaders. The SMHW30 pictured has a machine weight of 30 ton capacity and comes with solid tyre 2-wheel steer and 4-wheel drive carrier configuration. It is Powered by a 147kW Mitsubishi engine in conjunction with a Kawasaki positive hydraulic system and Sany DOMCS control
• • • • • •
Engine Type Mitsubishi DO6FRC-TAA Rated power 147 kW/2100 rpm Engine Max. torque 750 Nm/1350rpm Working radius 11.5m Working height 12m Working depth -4.5m
system. With World leading DANA drive axles and transmission, the SWHW30 is ready and willing to meet any challenge it faces head on. As the operator you get power, efficiency, and reliability, all in one machine. You can expect to get around 10% fuel saving in addition to a projected 10% efficiency saving. So, it just makes sense to choose Sany
when considering for your next log loader options. Fitted with Randalls Australian made grapples, backed by Randalls “Customer first” support network, it has all your wants and needs covered giving you the extra peace of mind that comes only from purchasing Randalls backed products. The Sany’s elevating cab is capable of rising 2.65m above its normal resting position which gives the operator 5.4mt eye height when loading, ensuring you always have a bird’s eye view and the ability to clearly see far and wide making loading a lot easier. And with this improved visibility also comes improved safety. Used in ports, wood yards and warehouses throughout
SANY • The SMHW30 model fitted with Randalls 1.3IR22 Log Grapple.
the world due to its performance and lifting capacity, the Sany wheel series material handlers features a maximum height point stick reach up to 12 mt on the SMHW30 and 19 mt on the SMHW48 .
A CUT ABOVE THE REST
CONTACT + 64 21 842413 OR GO TO QUADCO.COM
www.timberbiz.com.au
Australian Forests & Timber News December 2021
25
Loaders Onetrak’s new Albany branch
O
netrak has relocated its Western Australia branch to new facilities in Albany at the southern tip of Western Australia. Onetrak is known mainly in the forestry industry as the dealer for Tigercat but also other major brands including Hidromek, Striker, Anaconda, Fuchs and Dressta. The company has locations in Tasmania, Victoria, New South Wales, Western Australia, South Australia and Queensland. The new premises include two separate buildings for spare parts warehouse/office and the workshop. The WA aftersales support team now consists of 5 fully equipped Field Service vehicles and 5 experienced factory trained dedicated forestry field service technicians based in Albany and one full-time resident fitter based in Esperance. Additional personnel are also based in Bunbury. The move will allow Onetrak to better service the large forestry contractors base in the region. Both spare parts and service capacity has been increased with the move to the new location. Onetrak stock spare parts for most makes and models and the regional branches are supported by a warehouse and distribution centre in Victoria. Onetrak is also the distributor for Veriga forestry chains, Daemo Alicon rockbreakers, Rotobec grappes, Timbermax forestry winch systems, Donaldson filters and Castrol oils. Onetrak Albany is open for business. You can visit on 24 Stirling Street, Robinson or contact the team by calling 08 9725 7299. For service and repairs for all makes and models contact Trevor Els on 0427 429 112 or trevor.els@ onetrak.com.au. For all spare parts enquiries contact Bradley Carroll on 0439 906 125 or bradley.carroll@onetrak. com.au. You can learn more about Onetrak by visiting www.onetrak.com. au or call through to your nearest branch on 1300 727 520.
26
New loader debuts at Indianapolis launch M orbark has debuted the Rayco 4000AWL Articulated Wheel Loader at the TCI Expo in Indianapolis. The company also offered an overview of additional equipment within the Morbark, Boxer, Denis Cimaf, and Rayco brands that complement the equipment needs of tree care professionals. “At Morbark, we are focused on continually providing new products and product improvements that meet our customers’ needs and help them succeed in their businesses,” said Jason Showers, Morbark Director of Tree Care Products. “The new 4000AWL articulated wheel loader is in direct response to our customer’s requests and feedback for higher capacity, with cost and labor-saving tool options.” Rayco 4000AWL Articulated Wheel Loader The 4000AWL is the second model in Rayco’s articulated wheel loader line and is designed to meet the
material handling needs of landscape contractors, tree services, rental companies, municipalities, and agricultural businesses. This turffriendly, highly maneuverable articulated wheel loader offers a light footprint and heavy workload. Designed to meet the material handling needs of tree services, landscapers, rental companies, municipalities, light construction, and agricultural business, the 4000AWL can take on a multitude of big challenges in tight areas while minimizing ground disturbances. In addition, the 4000AWL offers impressive lifting capacity and a compact size that eas-
ily works inside fenced-in yards, pens, nurseries, and more. The 4000AWL is outfitted with a standard skid steer attachment plate and can accommodate many attachments. In addition, the quick-attach system enables users to quickly and easily switch from a bucket to forks or other tools for optimum on-the-job flexibility and bottom-line performance. The telescoping boom provides excellent lifting and dumping height, enabling loading on high-sided trucks and other applications that require extended reach. The 4000AWL has a maximum lift height (measured at the hinge pin) of 126 inches (320.7 cm). With its 48-hp (36-kW) Isuzu 4LE2T diesel engine, the 4000AWL generates a working lift capacity of 4000 lb (1814.4 kg). The small footprint (the 4000AWL is only 56.63”/143.8 cm wide) and articulating design give operators the agility they need to maneuver in close quar-
Australian Forests & Timber News December 2021
ters, such as small yards or narrow pathways. At the same time, the turf tires provide minimal turf disruption when making turns. The 4000AWL has been built with operator comfort and safety in mind, including a low-profile suspension seat within the ROPS/FOPScertified roll cage. In addition, the open-air design provides a clear view of the worksite in all directions, and easy-to-use controls make these machines simple for anyone to operate. Also featured in Morbark’s booth were favorite models from the company’s family of brands: Morbark 2400X Wood Hog Horizontal Grinder, Morbark Eeger Beever™ 1215, 1621X, 1821, and 2131 Brush Chippers; Rayco RG37 4x4, RG55 Trac, RG74 Trac, and RG80 Stump Cutters; Rayco 1800AWL, Rayco C200 Forestry Mulcher with DENIS CIMAF Mulching Head; Boxer 385D and 700HDX Mini Skid Steers; and DENIS CIMAF DAH-150E Boom-mounted Mulcher Head. www.timberbiz.com.au
Feller buncher
Tigercat upgrades T igercat has released the 822E series feller bunchers and harvesters with the latest features and upgrades. The 822E is the most compact track feller buncher and harvester platform in the Tigercat track carrier line-up. The powerful machine is versatile for challenging thinning and final felling applications. Strong lift capacity, tight-tuck ER boom geometry, and compact tail-swing make the 822E the perfect choice for selective felling where minimal site impact is important. The harvester configuration is available with a fixed or leveling undercarriage. High horsepower and harvester head optimized hydraulics provides responsive control, quick feed speed and powerful delimbing capability for high performance and productivity. The 822E series carriers can be equipped with the Tigercat FPT N67 Non-
certified, Tier 4f or Stage V engine, producing 210 kW (282 hp). A redesigned engine enclosure provides improved roof access for clearing debris. A boom slider also reduces debris build-up in hard-to-reach areas. The clamshell style enclosure and drop-down side platform allow easy access to all sides of the engine, valves and daily service points. A hot shutdown feature has been added. This allows the turbo to sufficiently cool before stopping the engine for improved turbo life. A larger, spring-assisted pump cover improves service access to the hydraulic pump area. Hydraulic improvements include quicker anti-stall response, consistent anti-cavitation flow and improved heat rejection. The updated E-series cab includes a new parallel ac-
From modest beginnings, Ensign has grown to become one of the most trusted and respected names in the log handling business. Today, Ensign continues to build on that reputation as it continually refines and develops its product range in an effort to supply its clients with the very best tools for the job.
The 822E is the most compact track feller buncher and harvester platform in the Tigercat track carrier line-up.
tion air ride seat with integrated heating and cooling. The reclining seat is fully adjustable with seat angle and seat extension adjustment. The wider seat cushion and lumbar support provide operator comfort all day long.
The full-length front window and narrow side posts give the operator an excellent view of the tracks and surrounding area. The HVAC controls feature a new infinitely variable fan speed control, which can
LOG FORKS
be adjusted on the control panel, or by the machine control system touchscreen. Additional features include an emergency stop button and multiple storage locations with nets to keep objects in place.
GRAPPLES
When there’s no standard option available we’ll build something that works exactly the way you need it. If you’ve broken it, we’ll fix it - and if you need it altered to work differently, we can do that too.
Servicing the forestry industry for 50 years
That’s why Ensign is the forest industry’s first choice.
BUCKETS
PALLET FORKS
FOR PRODUCT & SALES ENQUIRIES CONTACT GB FORESTRY
P. 03 8353 6655 E: office@gbforestry.com.au GBFORESTRY.COM.AU
GB Forestry are the exclusive distributor of Ensign forestry attachments & equipment.
© Copyright 2021 Engineering Service Rotorua Ltd. All Rights Reserved. The Ensign brand is a trademark of Engineering Services Rotorua Ltd.
aft_ensign_halfpage_advert_0203021.indd www.timberbiz.com.au
1
Australian Forests & Timber News December 2021
2/03/2021 1:46:44 PM 27
Harvester heads
New Waratah heads provide versatile productivity and durability HTH616 Series•III The features a new, more
efficient main control valve that can be configured with various options.
F
or more than 45 years, loggers around the globe have counted on Waratah Forestry Equipment to manufacture harvester heads that are built to work in the toughest woods. Two new Waratah harvester heads, the H425X and the HTH616C SeriesIII, showcase the company’s commitment to customers. Versatile productivity with the HTH616C Series-III Waratah introduced the HTH616C Series-III – the next generation of its HTH616C harvester head – earlier this year. Featuring a highly efficient valve and extensive optionality, the HTH616C Series-III is performance-ready for productivity on wheeled or tracked carriers. Plus, the head features improved accessibility and serviceability. “This versatile head gives more performance from low powered carriers, and it provides a great option for those with WCTL machines who want a 600 series head,” said Brent Fisher, product marketing manager for Waratah. With a weight starting at 1,800 kg (3,968 lb.), the
28
HTH616 Series-III features a new, more efficient main control valve that can be configured with various options to fit performance needs on wheeled or tracked carriers. Motor selections can be configured to complement the new valve and improve feeding speed, with a high torque motor option available to help increase productivity in the toughest delimbing conditions. The new valve also provides improved responsiveness in the delimb and drive arms to enhance grabbing stems, log handling and improve sawing performance, helping reduce processing times. New cast delimb arm design improves limb shedding and can be configured in a processing or harvesting profile with a maximum delimb opening of 68.5 cm (27 in.). The H616C Series-III has optional twin diameter sensors that provide better measuring when small
The tough H425X features an extreme duty main saw box •with heavier steel plating. end diameters are critical. Additionally, the head features more length measuring consistency, with more measuring arm travel and enhanced measuring arm responsiveness. Beyond improved productivity, the HTH616C SeriesIII also has a variety of features for increased uptime. Hose routing has been optimized to the new valve, improving fitting access and easier serviceability, while new optional harvesting guards for the main valve, drive arms and saw box are available to reduce understory hosing interference.
Additionally, a new and improved valve cover provides quick no-tools access with integrated handles and quick-attach pins. A larger oiler filler improves the ease of filling bar and chain oil and helps shorten daily servicing. “Boosting productivity and profitability for customers is what the HTH616C SeriesIII is all about,” Fisher said. Extreme durability with the H425X When it comes to tackling the toughest woods, loggers can rely on the new Waratah H425X. This rugged har-
Australian Forests & Timber News December 2021
vester head features a powerful control valve and four roller feed arm geometry for maximum productivity on wheeled or tracked carriers. “The H425X is purposebuilt for durability and performance,” Fisher said. “New hose protection and servicing enhancements are just a few of its many new features.” Weighing in at 1426 kg (3,143 lb.), the H425X offers loggers increased reliability with new feed motor hosing routings and new covers. It also features a new hinged valve cover and improved access to greasing for quick and easy servicing. The tough H425X features an extreme duty main saw box with heavier steel plating, extra feed motor component guarding, a heavy-duty tilt frame, hose protection and increased drive arm durability for demanding applications in mixed stand harvesting. Its four roller feed arm geometry ensures rollers grip solidly in all diameters, improving responsiveness with unprecedented treeprocessing performance – especially in large timber. Additionally, the H425X offers options for applications with multi-tree handling, an integrated top saw and processing knives for picking from piles or hardwood applications, and several feed wheel options to suit a variety of applications. “The H425X and the HTH616C Series-III are prime examples of the versatility and durability that Waratah provides loggers,” Fisher said. “With each new head generation, we’re offering our customers the solutions they need to maximize uptime and get the most out of every piece of wood.” For more information about Waratah, please visit Waratah.com, or contact Brendon Satchwell at Brendon.Satchwell@waratah. com. www.timberbiz.com.au
Mill profile Looking Back 2020 SUSTAINABLE timber harvesting is not a significant threat to koalas in New South Wales, a State Government inquiry has been told. The Forestry Corporation of NSW has told the Inquiry into koala populations and habitat in New South Wales that known threats to koala populations are permanent land clearing, activities associated with urban development, fire and drought. These threats occur across tenures, including in areas set aside for conservation, corporation told the inquiry.
• Rod Henson with Cory O’Brien and right, son Allen
2016
Broad species a wise choice Keith Smiley
A
ssailed by the tumultuous elements of fire, water, and government intransigence, one sawmiller has defied the odds by remaining on an even keel, drawing on a clever strategy. Henson Sawmilling is tucked away 16 kilometres north of Grafton in New South Wales’ lush belt, abounding with a wide variety of tree species made viable for infrastructure and domestic timbers. One of its directors, Rod Henson, believes this variety is a key factor in their survival from tempests and intractable government entities. Born in Swan Hill, Victoria, Rod and his father moved to the Grafton area, after the red gum industry fell in a heap due to decisions hastily made by that state government. Seventeen years later the business now employs 38 skilled workers who man three twin edges, several oneman benches and ‘fairly large’ pinewood dockers. It was a bold move for the father and son team whose goal was to create a thriving enterprise in a beautiful climate. They got both and even involved others to share the dream. Two industry directors came onboard: Andrew www.timberbiz.com.au
Epthorp owns Lumara Timber and sells Henson timber to retail in Sydney and the other director, Ken Obrien owns Red Gum Firewood; while his son Cory O’Brien is in charge of processing orders and organising the staff at Henson. Very much a family affair, Rod’s daughter Tamika works in the office with her sister in law, Bree, while Tamika’s brother Allen is in charge of maintenance and the ‘wellbeing of operations’. “I took over the business in 1994 when dad semi-retired, and has since passed on. He gave me good advice but we disagreed some of the time,” Rod says with a hearty smile. “While I’ve backed off a bit, through getting old, I love to keep my hand in, doing odd jobs, or filling in. My wife Margaret is always there to help and spoils the five grandchildren when they visit,” said 62-year old, Rod. While they might be spoilt by their grandparents there may be a solution for the kids through succession planning in the future, a must, but a difficult road to plough for anyone, especially in rural areas. There is no doubt Rod Henson is conscientious, flexing with fairness, yet
his patience has probably pushed him over the line a number of times, and still he remains true to his emplacement at Henson Sawmilling. “There is a big future for the timber industry and for Henson’s, a massive future, because of our broad spectrum of timbers we cut for different applications,” Rod foretells. These timbers include: red and grey gum, blackbutt, spotted gum, tallowwood, white and red mahogany, stringy bark, turpentine, blue gum, ironbark and brush box – cut from private sources 300km north of the Queensland border to about 200km from Sydney. “To get
enough logs, we need that broad spread,” he says. As a boy he dreamt of working with his hands: “I was born to be a worker. I would keep fit and active and live a good lifestyle. I love the industry, treating it with a passion. You make a success of something you love doing.” Rod never thought the business would grow ‘so big’ but because of work demands the business has continued to prosper alongside the updating of equipment. His mill was spared in the 2019 fires which ravaged the area. With the fires closing in, they immediately stopped milling for two weeks; and removed the equipment and timber; to a clearing in their paddock. “We had two years of wet conditions which hampered our log intake. The loggers couldn’t get into the forest, because it was so wet under foot. This year, alone, we’ve had sixty inches of rain. Staff shortages remain the number one issue to resolve, despite paying well above average.” Rod Henson strikes you as a considered man, one who is reasonable, slow to anger and most likely a sound temperament to match his eagerness.
Australian Forests & Timber News December 2021
COOPERATION BETWEEN Australia and China in the field of forestry has been germinating for some time and recently took another solid turn toward the future when the Institute of Foresters Australia National President Rob de Fegely signed an historic Memorandum of Understanding with the President of the Chinese Society of Forestry Zhao Shucong. “This MOU builds on the significant interaction between our members and provides an important vehicle for building the relationship as our economic ties grow,” said Rob. “China is now our major forest products trading partner and so it makes sense for us to trade ideas and skills as well as products.” 2011 AUSTRALIA’S FOREST industry needs to be more vigilant about preventing eye injuries with more than half of all eye injuries happening at work and many workers unaware of vision problems which are putting them at risk, according to the country’s leading optometry body. As part of its 2011 ‘Eye accidents change lives forever’ campaign, Optometrists Association Australia (OAA) is urging industries most at risk to implement eye safety procedures and conduct regular vision screenings and eye tests for employees. 29
Classifieds
Sell your used equipment, advertise your tender, offer your real estate or find your next employee. For rates and deadlines call Gavin de Almeida on (08) 8369 9517 or email: g.dealmeida@ryanmediapl.com.au
FOR SALE
FTX150-2 FORESTRY TRACTOR
Loser, Dowell cut off machines Two Loser AA220 dowell cut off machines.
Plant capable of making 100,000 furniture dowell daily, eg 32mm x 8mm.
$4000 each or $6500 for the two
BUILT TOUGH FOR AUSTRALIAN CONDITIONS 155 HORSEPOWER | 227 LPM HYDRAULICS | SEVERE DUTY MULCHER
0437 222 211
|
www.fecon.net.au
Austral Timber Group
Contact: Ken Baker 0438 643 992 or ken.baker@dynagroup.com.au
www.forestrynow.com.au Thank you to everyone who took part in this year’s groundbreaking production FORESTRY NOW. The success of the project was in a large part down to the enthusiasm which so many contributors showed. We felt that with the past two years’ upheaval within the timber industry - bushfires, COVID lockdowns, China, plans to halt the native timber industry in at least two States and legal challenges it was time to take a snapshot of where we are and where we may be heading. Everyone involved in the timber industry agreed. Again, thank you. Bruce Mitchell, Editor
30
VISIT THE ONLINE DIRECTORY NOW
Australian Forests & Timber News December 2021
www.timberbiz.com.au
Classifieds
Sell your used equipment, advertise your tender, offer your real estate or find your next employee. For rates and deadlines call Gavin de Almeida on (08) 8369 9517 or email: g.dealmeida@ryanmediapl.com.au
FOR SALE 1
2
3
4
890.3 Valmet Forwarder 2012 With rear track & spare tyre All maintenance records available. 13,352 machine hours. $120,000 + GST ONO Contact Kevin Muskett on 0428 144 984
FIRST WITH INDUSTRY NEWS STRAIGHT TO YOUR INBOX www.timberbiz.com.au
2. Kennedy T658 prime mover 2009 model with 2009 model Kennedy Mini B Double C Locker. Truck has ISX Cummins on 540,000 km since rebuild. Full cross locks, CTI and scales. Will separate. $135,000 + GST 3. Kenworth T908 prime mover 2008 model and 1998 Elphinstone B Double Air Rider. Truck has 600 Cummins engine, 18 speed, full crosslocks, hydraulics and CTI. Will separate. $160,000 + GST
4. Caterpillar 535B grapple skidder showing 14,800 hours. 2003 model. Motor and transmission fully rebuilt 4,000 hours ago. $80,000 + GST 5. John Deere 748G II grapple skidder with dual arch grapple and 6,000 pound winch. Tyres 70% rear and 25% front with brand new chains. Air con enclosed cab, 1400 series axles, showing 16,500 hours. Very tidy machine. Little bit of wear in arctic pin, grapple and blade pins. $87,500 + GST
Tigercat H822C Harvester with Waratah HTH618 $150,000 + GST
Tigercat 635D Skidder
CBI Magnum Force 604 Flail Debarker
$260,000 + GST
$325,000 +GST
Tigercat E625C Skidder $155,000 + GST
Komatsu PC270LC-8 Harvester
Rotobec Forwarder Grapples From $5,700 + GST
Tigercat 1075C Forwarder
$145,000 + GST
Tigercat H860C Harvester with Waratah HTH622B or HTH624C $165,000-$185,000+ GST
Tigercat 1075C
$385,000 +GST
$585,000 + GST
Tigercat 570 & 575 Harvesting Heads Available for immediate delivery
Tigercat DT5003 Bunching Saw
NEW Tigercat H822D Harvester Ask for special pricing
Waratah HTH624C $55,000 + GST
CONTACT Jack EPJ Trading Co 0428 506 035 office@griffithsgroup.co
SUBSCRIBE ONLINE TIMBERBIZ.COM.AU www.timberbiz.com.au
I n c o r p o r a t i n g A U S T R A L A S I A N F O R E S T L O G G E R & S AW M I L L E R
$45,000 +GST
1300 727 520 www.onetrak.com.au All Prices exclude GST
australasian
Brought to you by
Tigercat 822 Harvester with Waratah HTH624 $125,000 + GST
5
1. Kennedy folding skel trailer with cab guards, carry bars and turntable with scales. 2008 model. $32,000 + GST
FOR SALE
Onetrak
magazine
Australian Forests & Timber News December 2021
REACHING OVER 6,000 EMAILS EVERY WEEK.ADVERTISE WITH DAILY TIMBER NEWS TODAY!
31
Komatsu 895.2 Stage II 210 kW Hydraulic Lifters
Maxi XT Control System
Heavy Duty Load Gate
Optional Speedshift Transmission
Optional Xtreme Transmission
Heavy Duty Bogie Assembly (Xtreme only)
New Intelligent Transmissions for Increased Productivity The new Komatsu 895.2 Forwarder offers increased productivity with two unique transmission options; • SpeedShift … gear change “on the fly” with high 262 kN torque • Xtreme … severe/steep conditions with very high 307 kN torque • New Maxi XT Control System
Komatsu Forwarders lead the way in production Komatsu Forest Pty Ltd. 11/4 Avenue of Americas Newington NSW 2127 Australia T: +61 2 9647 3600 E: info.au@komatsuforest.com