WASH SYSTEMS
The variable modular system
www.christ-ag.com
The Real Car Wash Factory
Our services Consultation by wash professionals We are only able to scratch the surface of our comprehensive offer in this brochure. Our professional consultants are happy to work with you personally in creating an individual site analysis.
Should you have any questions or inquiries, please do not hesitate to contact us. Tel. +49 8331 857-0 Fax +49 8331 857-493 www.christ-ag.com sales@christ-ag.com
Tailor-made solutions
SOAKING ZONE
T
ASH SY W S
MS TE
Good weather means wash time and rush hour at the wash tunnel. Hot vehicle surfaces are cooled down before the wash takes place, making the following manual or automatic high-pressure pre-cleaning even more effective. In winter operation, road salt dirt remnants are dissolved.
CHR IS
Pre-spray device
-saving Energy y hnolog LED-tec
G
RE
E N - LI N
E
Pre-spray device, aluminum premium arch, LED-illumination, PW 3.550 mm Eye-catching LED pre-spray arch for stationary installation in front of the wash tunnel in the entrance area. High-grade frame made from aluminum with duplex powder coating in passage width (PW) 3.550 mm. The LED-illumination system integrated in the arch is energy-saving and is covered on the front-side with transluscent decorative plastic foil covers.
Pre-spray device, aluminum premium arch, nonilluminated, PW 3.550 mm Eye-catching pre-spray arch for stationary installation in front of the wash tunnel in the entrance area. High-grade frame made from aluminum with duplex powder coating in passage width (PW) 3.550 mm. This version is non illuminated. The front-side of the arch is covered with a decorative foil.
Pre-spray device, DURAPROTECT arch, non-illuminated, PW 3.550 mm Functional pre-spray arch for stationary installation in front of the wash tunnel in the entrance area. Highgrade DURAPROTECT frame made from stainless steel 1.4301 with duplex powder coating in passage width (PW) 3.550 mm. This version is not illuminated. The front-side of the arch is covered with DURAPROTECT panels.
5
Manual pre-wash zone Manual pre-wash systems
Pre-spray device, manual For application of fly and rim chemicals including a chemical spray lance, storage tank and chemical injection in the supplied water. Hose guidance via a deck rotary system or wall installation.
CAIMAN, Alcaline Pre-cleaner. powerful, universal pre-cleaner for dirt softening on rims and vehicle painted surfaces.
Bye
Bye
Fly!
insect-foam special-wash FOAM-REX insect foam pre-spray device
For application of basic pre-cleaner in foamed form. Area of application: Insect erosion on the vehicle and dirt softening on the rim areas. Complete system with single deck rotary head, XXL foam pistol with supply hose, lance holster, high-pressure supply device and chemical dosing.
FOAM REX insect foam Basic special foam with insect eroding formula and fresh alpine scent.
The manual pre-wash with pre-cleaner and high-pressure is the identifying feature of wash tunnels with a service concept. Wash customers view this as a performance bonus for a more thorough vehicle wash and honor this service through a higher average wash price.
High-pressure lance The central tool of the pre-wash personnel. An easy to handle pistol grip and a lower weight make the work easier. Available lance lengths: 650 mm or 1.050 mm Supply device, high-pressure
Powerful high-pressure supply for vehicle precleaning with cold water (can be used with warm water at up to 55°C provided by the customer). Pump pressure variants: 85 bar or 120 bar Single deck rotary head, 360°, stainless steel For mounting a spray lance (HP or LP), working radius 360°. Double deck rotary head, 360°, stainless steel Two swinging arms for mounting a high-pressure spray lance (HP) and a low-pressure spray lance (LP), working radius 360° Single deck rotary head, 360°, stainless steel, z-form For mounting a spray lance (HP or LP), working radius 360°, rotary in z-form for tangle free swinging
Equipment For the entrance area
Sales counter The service counter model can be obtained with either a flat button or touchscreen operation terminal
Handbrush holster „basic“, portable, stainless steel For submersing handwash brushes in wash water (vehicle pre-wash). Hand brush holster made from stainless steel (unheated), wheels and wheel brakes, removeable sieve insert made from stainless steel and drain valve.
8
Handbrush holster, „professional“, portable, stainless steel For submersing handwash brushes in wash water (vehicle pre-wash). Handbrush holster made from stainless steel (unheated) with 2 wash water chambers, wheels and wheel brakes, removeable sieve insert made from stainless steel, manual drain valve, brush shaft holding device and handwash brush set.
CONVEYOR EQUIPMENT Entry aid and push-on system
Wheel correlator
This entry aid in the chain conveyor system is a necessary accessory in overcoming difficult entry situations or in helping drivers unfamiliar with the facility. The roller guided floor plate easily guides the wheels into the conveyor lane.
Feed-in conveyor system, plastic For wash tunnels with customer corridor The vehicle is driven over the wheel correlator and stopped on the feed-in conveyor (wheel carrier is located on top in centre position as a brake barrier). Feed-in succeeds following program selection on the control console. The feed-in conveyor is initiated and the wheel carrier pushes the right front wheel forward until the left front wheel is in the main conveyor (double chain conveyor or plate conveyor). At this point, the vehicle is taken over and pulled by the main conveyor.
9
CONVEYOR EQUIPMENT Double chain conveyor Double chain conveyor Vehicles are conveyed through the vehicle wash unit by means of chain driven rollers moving at a constant speed. A frequency controlled gearless drive is construed according to the chain length and is used as the drive unit. This drive sits directly on the motor shaft.
An integrated overload protection device switches the drive off during an emergency. Therefore, a shearing pin is no longer necessary. The conveyor speed can be regulated and the respectively required capacity can be adjusted to.
Additional rim protection Rim damages in the conveyor device are minimized by use of protective caps.
Conveyor dimensions: Maximum wheel width: 330 mm Over-ground conveyor height: 50 mm
10
CONVEYOR EQUIPMENT Plate conveyor Plate conveyor, plastic
The vehicles are conveyed through the wash stations by the wheel carriers integrated in the plastic plates. Plastic plates with increased material thickness are delivered for conveyor lengths starting at 36.325 mm.
The left wheels stand during the drag process on the band (no rolling movement). A frequency controlled gearless drive is used as a drive unit just as with the double chain conveyor. The conveyor speed can be adjusted to correspond to the required capacity.
Additional rim protection Employment of plastic plates prevents rims from being damaged in the conveyor device. The upturn beams are integrated in the band and move with the wheel and serve for wheel protection and stabile guidance.
Conveyor dimensions: Maximum wheel width: 360 mm Above-ground conveyor height: 50 mm
11
AUTOMATIC PRE-WASH ZONE CHR IS
Pre-spray systems
T
E LE
G
Foam spray device, aluminum premium arch, LED Eye-catching entrance portal made from powder-coated aluminum with vehicle and height identification system. Front side with translucent, labeled plastic plates. Illuminated system: 1 Lamp compartment in lateral beam, 1 lamp compartment in left and right side beam, up to 6 additional illuminated LED-program indications in
illumination, including program indication left side beam. A running program display can be purchased optionally. Alternative arch versions: a) Without program indication (left side piece also with drive-in pointers) b) Without foam fan spray jets and foam reactor /as pre-spray arch with flat spray jets)
W
R
ASH SY W S MS TE
-saving Energy nology ED-tech
RE
E N - LI N
E
Foam flat spray jets from Christ For special visual optics on the foam arch. The foam carpet is applied evenly and well targeted. Cost-efficient: Reduced chemical and water consumption.
TWIN FOAM. Premium hybrid foam with fresh alpine scent. Perfect for wash units with Protect Shine. TWIN FOAM can also be used as shampoo.
Running program display For displaying advertising and promotions. With PC software for free text programming.
13
Automatic pre-wash zone Pre-spray systems
Pre-spray device, aluminum premium arch, not illuminated
Frontside covered with labelled plastic plate coverings. No lighting system. Alternative arch model: With foam flat spray jets and foam reactor (instead of flat spray jets)
Rim spray device free-standing. Rim cleaner is sprayed onto the rims in order to losen the dirt. The device is light barrier controlled. RIM REX. Acidic rim cleaner. Ideal for the rim spray device.
Chemcial spray device front/rear. This special device is irreplaceable in express wash tunnel concepts. The spray device consists of two spray pipes and is delivered with 2 dosing pumps (for various pre-cleaning chemicals). The first spray pipe sprays against the lower front area (insect area) and the second spray pipe against the lower rear area (around exhaust pipe grime).
RAPTOR. Basic premium pre-cleaner. Top performance through a fast and effective formula.
Automatic pre-wash zone High-pressure pre-wash systems
JETSTREAM-EXPRESS An effective and powerful automatic high-pressure wash is strongly recommended for express wash concepts in order to prepare the vehicle for the subsequent brush wash.
JETSTREAM-EXPRESS powerfully sprays the vehicle with its 5 oscillating high-pressure jet devices (Point spray jet). A working pressure of up to 50 bar at approx. 140 ltr./min. can be achieved in combination with two piston membrane pumps suited for recycled water (up to 250 Οm particle size). The jet devices spray against the vehicle at the start of the program and pivot in towards the vehicle’s end in the rear area for a thorough rear wash. The side devices work in alternating operation according to vehicle area. Frame material: Duraprotect (see Page 43).
JETSTREAM SEMI-EXPRESS Ideal for wash tunnels with semi-express wash concepts. The arch relieves the pre wash personnel and thus reduces the workload. The vehicle is cleaned by 4 oscillating high-pressure jet units (working pressure approx. 50 bar at approx. 70 ltr./min.) These spray parallel to the vehicle and turn towards the rear of the vehicle once reaching the vehicle’s end. Frame material: Duraprotect.
JETSTREAM-MATRIX Combination The JETSTREAM-EXPRESS or the JETSTREAM SEMIEXPRESS can be mounted directly on the high-pressure wheel/sill washer MATRIX. This way, a compact highpressure pre-wash combination is created. We are flexible: Upon request, we can also combine piston membrane pumps with 80 bar and adjust the amount of high-pressure jet devices according to the specific project.
17
Automatic pre-wash zone Pre-wash systems
Middle-pressure spray device, mounted on Evolution Wash Portal For full-surface rinsing of softened dirt by middlepressure spray jets. The spray pipe can be mounted to various Evolution Wash Portals (in the picture on the frame of the kinematic roof cylinder). Designed for supply by centrifugal pump up to 16 bar at 100 ltr./min.
Middle-pressure spray device, DURAPROTECT arch. High-grade middle-pressure arch in DURAPROTECT frame material. The piping with the spray jets is mounted on the rear of the arch. The arch is designed for supply by a centrifugal pump up to 16 bar at 100 ltr./min. (upon request also combineable with piston membrane pumps).
Middle-pressure spray device, aluminum profile arch Cost-efficient middle-pressure arch designed with powder coated aluminium frame profile. The piping with the spray jets is mounted on the rear side of the arch on mounting consoles. The arch is designed for supply by a centrifugal pump up to 16 bar at 100 ltr./min.100 l/min.
Automatic pre-wash zone High-pressure wheel wash systems
Wheel / sill wash device TIREJET The TIREJET cleans the sill and wheel areas, with an electrically driven, 360째 rotating high-pressure jet device. It is ideally situated following a brush wheel wash unit in order to rinse off softened rim dirt. Working pressure: up to 50 bar at approx. 70 ltr./min. (supply via piston membrane pump capable of functioning with recycled water).
Automatic pre-wash zone High-pressure wheel wash systems
Wheel-/ Sill wash device HD-ROTATION, accompanying Effective high-pressure cleaning for sill and rim areas. HP-ROTATION is especially designed for installation and application following the wheel brush wash unit. Two oscillating high-pressure devices wash dirt off of each side (0° jets) of the vehicle in an accompanying movement (1.000 mm). A working pressure of up to 80 bar at approx. 70 ltr./min. can be achieved in combination with a piston membrane pump suited for use with recycled water ( up to 250Οm particle size).
Frame material: DURAPROTECT
Optional: Pivoting device Pivoting device for 3 adjusted angles: Slanted against vehicle front corners, then parallel to the vehicle, then slanted against vehicle rear corners.
Wheel / sill wash device HP-MATRIX, accompanying For high-pressure cleaning of sill and rim areas and especially wheel arches. This aggregate is the ideal complement for wash tunnels with an express wash concept. Large dirt particles are thoroughly removed and the vehicle is ideally prepared for the following wash stations. Two oscillating high-pressure devices wash dirt off of each side (0° jets) of the vehicle in an accompanying movement (1.000 mm).
The vehicle front and rear are washed by a pneumatic pivoting movement. A working pressure of approx. 50 bar at approx. 69 ltr./min can be achieved in combination with two recycled water suitable piston membrane pumps (up to 250 Âľm particle size).
Frame material: DURAPROTECT.
Automatic pre-wash zone Automatic wheel wash systems
Wheel / sill wash device, longitudinal For intensive cleaning of the wheels and the lower vehicle side parties by horizontal wash cylinders on the left and right sides. Both horizontal wash cylinders pivot in the driving direction, mounted in a stand construction and adjust to the exact width of each vehicle.
The wheel wash principal remains the same: The wheel area is washed by the wheel turning while passing the wash cylinder (left wheels turn on double chain conveyor along the cylinder).
Frame material: DURAPROTECT
Optionally available: Wash material BRUSH PREMIUM Special polyethylene brushes (black/grey) with profiled trimming and mixed brush hair model (brush hair geometry, diameter and length) for increased cleaning performance.
Wheel wash device, wheel following Both wheel wash brushes are synchronously and pneumatically guided on the wheel pair to be washed. Correct control of the applied brush pressure as well as correct inner irrigation of the brush guarantees a thorough rim wash. The wheel washer is activated via a light barrier system. Starting at this point it runs frequency controlled 1.000 mm with the wheels. Frame material: DURAPROTECT
Wheel wash device Stable linear guidance of the inner, irrigated wheel wash brushes. High cleaning performance through pulsating brush grip and rotation direction change. Wheel recognization via light barrier.
Automatic pre-wash zone Under-chassis wash systems
Medium-pressure spray device for front, under-body and rear, floor installation above-ground Designed for touchless cleaning of the lower front and rear surfaces with medium-pressure. The water jets overlap underneath the vehicle in the wash program “under-chassis wash�. This aggregate is capable of being retrofitted in wash tunnels with
existing foundations, due to its above-ground installation. With the respective supply device, the device can be operated with a working pressure of approx. 15 bar at approx. 100 ltr./min..
Main wash zone Contour cylinders (rocker)
Contour wash unit KONTEX-HYBRID, 2 Cylinders, WH 1.100mm A substantial component of the wash tunnel. This unit is used for washing the sill and fender surfaces as well as the lower side surfaces. The frame is made from stainless steel. Side wash height: 1.100 mm.
Contour wash unit MINI-KONTEX-HYBRID, 2 Cylinders, WH 500 mm Special aggregate for the sill area, the lower side surfaces and the rims. Slanted position can be adjusted. Frame made from stainless steel. Side wash height: 500 mm.
Contour wash unit VAN-KONTEX-HYBRID, 2 Cylinders, WH 1.900 mm Can be used for washing vehicle side surfaces as well as a side polishing aggregate in the polishing zone (profiled cylinder trimming). Frame made from stainless steel. Side wash height: 1.900 mm.
Main wash zone EVOLUTION Wash aggregates
26
EVOLUTION in wash tunnel technology
True to the motto of Friedrich Schiller „Simplicity is the result of maturity“, the focus of the EVOLUTION lies on quality, operator friendliness, wash sequences with cleverness and avoidance of „over-engineering“. Wash tunnel projects with capacity potentials of up to 30 to 120 passenger vehicles/hour can be
conceived. Space-saving modules for short wash tunnels and even modules with perfect all-around washing and extended rear follow-in. Standard frame material: galvanized steel portal with duplex powder coating. Optional premium level: DURAPROTECT (page 43). Wash height 2.050 mm / wash width 2.400 mm. Upon request, special wash height of 2.400 mm possible for diverse EVO aggregates. Innovative: Upon request, diverse cylinder systems can be equipped with the Christ direct drive (see page 41).
Main wash zone Roof cylinder system KINEMATIC
Roof cylinder system KINEMATIC, free-standing „Kinematic“ is defined as being the science of the movement of bodies in a room. This also applies to our moving roof cylinder – it moves over the horizontal vehicle surfaces to be washed and even over the rear of the vehicle and washes with simplicity and perfection without requiring any lifting motor / cables or belts. A counterweight maintains the balance and a pneumatic cylinder is used for lifting the cylinder if required The cylinder drive is serially controlled via a frequency converter (FC). The amount of rotations required can be set for the selected wash material via the FC.
EVOLUTION in wash tunnel technology
Vehicle front wash The roof cylinder kinematicalley moves upwards by means of the vehicle’s forward pushing movement
Horizontal front surface wash The roof cylinder holds the position by means of the counterweight setting
Horizontal surface wash The roof cylinder moves upwards until reaching the maximum vehicle height
Vehicle rear wash The roof cylinder lowers on the rear through the descending geometry of the vehicle’s rear
Main wash zone EVOLUTION All-around washer EVO-4
EVOLUTION All-around washer EVO-4 Wash portal Evolution EVO-4, 2 cylinders Completely automatic and pneumatic wash sequence. Precise and reliable „like a Swiss clock“. Two profiled side cylinders perform a centre crossover wash on the vehicle’s rear. The forward pushing movement of the vehicle opens the side cylinders on the vehicle’s front. The rear follow-up is completely automatic and is performed by the adjustable slanted position of the X-Rail travelling tracks. The travelling tracks are pneumatically pivotted during the side X-Rail travelling wash from the front wash position to the rear wash tracks: DURAPROTECT position. The air cylinder then brings them back to equipped as standard their starting position following the vehicle wash.
Start of the wash sequence in the EVO-4. The vehicle is pushed against the rotating left side cylinder.
Left side cylinder is pushed out to the left by the passenger vehicle = front wash left side was carried out (green arrow). The front wash on the right side is started parallel.
Left travelling tracks pivot in the rear wash position (orange arrow). Side cylinder on the right side is pushed out to the right by the passenger vehicle = front wash right side (green arrow).
Left side cylinder washes the left side surface. Right side cylinder washes the right side surface (travelling tracks on the right side are not yet in the rear wash position)
Left side cylinder follows in after the vehicle = start rear wash left side (green arrow). Travelling tracks on the right side pivot in the rear wash position (orange arrow).
Left travelling tracks pivot in again in the front wash position. The next car can enter. Side cylinder right follows in on the vehicle = start rear wash right side (green arrow).
T
-saving Energy y hnolog LED-tec
G
Tip: Sell Protect Shine as an additional program and increase the average wash price
ASH SY W S
MS TE
Polishing arch / Protect Shine
CHR IS
Main wash zone
RE
E N - LI N
E
PROTECT SHINE Polishing spray device, Aluminum premium arch with LED-illumination. High-grade arch made from powder coated aluminum with LED background lighting for application of Protect Shine Nano Gloss Polish via two foam fan
spray jets. Including full-surface adhesion in the Protect Shine design and 25 kg Protect Shine from Christ Car Care. The Protect Shine applied to the vehicle is rubbed in by the following textile wash dervices
Outer influences seal off the vehicle paint surface. Gloss is reduced.
Protect Shine is rubbed in and evens out irregularities.
PROTECT SHINE Polishing spray device, DURAPROTECT arch nonilluminated. Arch designed in powder coated stainless steel (DURAPROTECT) for applicaton of Protect Shine Nano Gloss Polish via two foam fan spray jets.
Regular application strengthens the protective layer.
Including adhesion in Protect Shine Design and 25 kg Protect Shine from Christ Car Care. The Protect Shine applied to the vehicle is rubbed in by the following textile wash devices.
The vehicle paint surface becomes increasingly even and shines with a new premium gloss.
Main wash zone EVOLUTION Wash portal EVO-1 with crossmitter
EVOLUTION Wash portal EVO-1 with crossmitter Wash portal Evolution EVO-1, 2 cylinders and 1 crossmitter The 2 front mounted side cylinders wash the vehicle’s front, side andrear. Cylinder opening controlled by active power measurement on the electric brush drive, Brush pressure controlled by a tension spring system. The cylinders can be adjusted off-center to the wash axis (centre cross-over by two cylinder pairs). The electrical crossmitter washes the vehicle’s horizontal surfaces and upper side surfaces This portal can also be installed as a textile dryer following the blowing dryer.
Main wash zone Washmitter free-standing
Washmitter cross-swinging, free-standing Sturdy frame made from galvanized steel with duplex powder coating and plastic doors. The electrically driven crossmitter, with its 4 DURAPROTECT receiving rockers for wash textile (e.g. Teddytex microfasertextile), washes side surfaces and upper side surfaces with the textile strips swinging sideways to the vehicle. A polishing spray device can be mounted on the front-side of the washmitter.
35
Main wash zone EVOLUTION-Wash portal EVO-1 Wash portal EVO-1, 2 cylinders or 3 cylinders Sturdy frame made from galvanized steel with duplex powder coating and plastic doors. The side cylinders wash the vehicle’s front, side and rear. Cylinder opening controlled by active power measurement on the electric brush drive, Brush pressure controlled by a tension spring system. The cylinders can be adjusted off-center to the wash axis (centre crossover via 2 cylinder pairs). FOLLOW-UP Roof cylinder system For contour-following washing of the horizotal vehicle surfaces. Moves upwards pursuant to the vehicle’s front and follows the vehicle’s rear. (pneumatic angle setting). Electrical cable lifting drive with frequency converter.
Side cylinders during the side wash
Side cylinders during the rear wash
Main wash zone FOLLOW-UP Roof cylinder system
Running rail in front wash position
Roof brush ascends at vehicle front
Running rail in rear wash position
Roof brush washes rear with downwards follow in movement
EVO-1 without roof cylinder
Roof cylinder mounted in front
Roof cylinder mounted in back
Follow-up free-standing
Main wash zone EVOLUTION Wash portal EVO-3
Wash portal Evolution EVO-3, 2 cylinders or 3 cylinders Two profiled side cylinders perform a centre cross-over wash on the vehicle. Opening and closing of the side cylinders succeeds electromotorically via the
X-Rail direct drive with frequency converter (FC). The travelling tracks pneumatically pivot from the front wash position to the rear wash position during the side wash.
The air cylinder brings them then back to their starting position following the vehicle wash. FOLLOW-UP Roof cylinder system: Also compatible with the EVO-3!
EVO-3 without roof cylinder
Roof cylinder mounted in front
Roof cylinder mounted in back
Accompanying left side cylinders for front wash.
Left side wash and right front wash cylinder.
Left travelling tracks pivot in on rear wash position.
Rear wash left. Travelling tracks right in rear position.
Rear following rear wash right side cylinder.
39
Main wash zone EVOLUTION Wash portal EVO-2
Wash portal Evolution EVO-2, 2 cylinders or 3 cylinders Two profiled side cylinders allocated parallel to eachother wash the vehicle’s front, side and rear (accompanying on front, following in on rear). Electromotorically controled via xrail direct drive with frequency coverter (FC). During the side wash, the travelling tracks pneumatically pivot from the front wash position to the rear wash position. Following the vehicle wash, the air cylinder brings them back to their starting position. FOLLOW-UP Roof cylinder system: Also compatible with the EVO-2.
Roof cylinder mounted in the front
Roof cylinder mounted in the back
Main wash zone
T
ASH SY W S
MS TE
Direct drive for Evolution side cylinders and follow-up roof cylinder. Only Christ offers the direct drive for the Evolution side cylinders and the follow-up roof cylinder as an alternative option to the standard electro-drive motor. Electricity consumption – depending on the wash material used – is reduced by up to 30% with this revolutionary drive system. The rotation amount can be set according to the selected wash material, as each direct drive can be combined with a frequency converter (FC). Wash material with differing rotation amounts can be retrofitted without having to reconstruct drives.
CHR IS
Cylinder drive as direct drive
-saving Energy ology chn drive te
G Your advantages: RE E E N - LI N l Up to 30% less electricity consumtion l Rotation can be adjusted to suit wash material l Precise applied pressure regulation l Direct rotation direction turn change without loss of time l Problem-free wash material exchange without reconstruction
Main Wash Zone EVOLUTION Wash portal combination EVO-4S
Wash portal Evolution EVO-4S, 6 Cylinders PSpace-saving and effective combination portal with following equipment: 1 Side clyinder pair EVO-4 (see Page 30) 1 Side cylinder pair EVO-1 (see Page 36) 2 Follow-up roof cylinders (see Page 37)
Installation depth only approx. 9.500 mm
Wash portal Evolution EVO-4S, 5 cylinders and 1 crossmitter Space-saving and effective combination portal with following equipment: 1 Side cylinder pair EVO-4 (see Page 30) 1 Side cylinder pair EVO-1 (see Page 36) 1 Follow-up roof cylinder, mounted on the front (see Page 37) 1 Washmitter swinging crosswise, built on the rear (see Page 35)
42
DURAPROTECT Frame model
Optional frame model DURAPROTECT All of our Evolution portal frams, mitters and blowing dryer frames can optionally be executed in DURAPROTECT instead of the standard frame material (steel). DURAPROTECT = frames made from stainless steel (1.4301) with additional duplex-powder coating. The required cleaning effort for the operator is reduced by approx. 50% in comparision to portals made from stainless steel because of the additional coating.
Serial portal frame model
DURAPROTECT – in a class of it’s own Even higher grade: Stainless steel frame (1.4301) with duplex powder coating.
Care zone Clear rinse systems
Clear rinse arch, aluminum profile arch, non-illuminated All portals installed in front of the clear rinse arch are generally supplied with recylced water. In order to prevent recycled water getting mixed into the wax or drying aid application zone, all vehicles must be rinsed off preliminarily. This ensures that the drying aid or the wax optimally reacts and the drying results are good.
44
Clear rinse device, mounted on the front-side of the aluminum premium arch The clear rinse fan spray jets are installed on the front side of the extension and serve as a fresh water shower in front of the conservation arch. Vehicle passengers have full sight of the conservation arch, as there is no free-standing frame. The extensions can be shortened for short wash tunnels.
CHR IS
MS TE
T
ASH SY W S
-saving Energy y hnolog LED-tec
G
RE
E N - LI N
Care zone Conservation systems
E
Conservation spray device, aluminum premium arch, LED lighting Attractive conservation arch made from powder coated aluminium, front-side with transluscent, labelled plastic plates. The background illumination in the arch is completely designed with LED technology. A rear mounted, corrosion resistant drying aid spray pipe (with own dosing pump) is standardly included. This arch can also be obtained without illumination (an non-illuminated version). Equipment options for additional wash programs: a) b) c) d)
Foam wax spray pipe Special wax spray pipe Osmosis spray jets extension Osmosis spray string mirror area
Alpine Wax Sell as an additional program and increase the average wash price
AIR-FIT Scent dispenser
Air dispenser AIR-FIT, mounted on the backside of the spray arch Pneumatic air dispenser for automatic fragrance diffusion in wash hall. Activated by the wash unit, with adjustable spraying duration and the spray duration is adjustable. The release button can also be used for manual spraying. The dispenser is mounted on the backside of the aluminum premium arch or on the DURAPROTECT arch (air-pressure unit must be provided by the customer). AIR-FIT can be mounted on the foam, polishing or wax arch and can either be sprayed generally or according to the program. Advantage of mounting to conservation arch: The blowing dryer sucks the air molecules up and distributes these with the air stream throughout the outside area of the wash center. Depending upon the local situation e.g. the scent can also be detected within the vacuuming area. A fresh scent is indicative of a clean environment and is recognized by customers.
Seasonal selection: AIR-FIT scent concentrates from Christ Car Care
Equipment LED lighting console
LED lighting console, mounted on backside of spray arch For visual recognization support of special programs (e.g. wax or polishing application). The LED light strip can be directed toward the foam spray so that the foam application is colourfully lit up. The light pipe system can be combined with the aluminum premium arch or the DURAPROTECT arch and consists of 3 LED light beams (1x crossbeam, 2x side piece). Unlighted light strip + presentation of 6 light colours
6 Lights are adjusted (blinking or continuous light)
The LED lighting console shines in the white foam and lights it up blue
Colour setting in red Colour setting in green
Drying zone Blowing dryer
Pre-drying blower AEROPRO Front side extension set made from galvanized and painted steel, designed for the basic frame of the drying blower AEROFLEX. An AEROPRO consists of two pivoting pre-drying devices with integrated blowing motor (pivoting sequence through frequency controlled electromotor).
Start setting: Air stream directed against vehicle’s front
The pre-drying devices are additionally equipped with pneumatic air vent flaps for air stream guidance. The air stream is initially directed from above against the vehicle’s front. The pre-drying devices pivot offset with the vehicle and align the air emission angle against the vehicle’s rear. The pivoting sequence enables the airstream to be held longer on the vehicle, which in turn achieves optimum drying results.
End setting: Air stream directed against vehicle’s rear
CHR IS
G
-saving Energy wheel blower
RE
MS TE
T
ASH SY W S
E N - LI N
E
Drying blower AEROFLEX-1 Sturdy portal frame made from galvanized steel with duplex powder coating. Roof drying: A rigid roof jet made from anodized aluminum and two energy optimized blowers each with 7,5 kW motor performance and smooth running air wheels. Side dryer: 2 rigid side jets made from anodized aluminium, an energy optimized blower per side jet with selectively 7,5 kW or 5,5 kW motor performance and smooth running air wheels. Optional installation: Pre-dryer AEROPRO or VAN dryer jets
Optional frame material: DURAPROTECT
DRYING ZONE Drying blowers
Drying blower AEROFLEX-2 Frame material, side drying and add-ons same as AEROFLEX-1 (see page 49), but with alternative roof jet. Roof drying: A contour following telescope roof nozzle with light barrier system and electrical lift drive, two energy-optimized blowers (7,5kW or 5,5kW performance available) and smooth running blower wheels. Optional dryer add-on: Van dryer: For the optimizing of the drying in the upper side area. Two units with one blower each (performance: 3 kW) and a mounting console for the Aeroflex frame. Height, inclination and angle are manually adjustable.
CHR IS
G
Drying blower AEROFLEX-3 Frame model, side drying and attachment options as with drying blower AEROFLEX-1 (see Page 49), but with alternative roof jet: Roof drying: Contour-following and up to 25째 swivelling roof jet made from
-saving Energy wheel blower
RE
MS TE
T
ASH SY W S
E N - LI N
E
anodized aluminum, with light barrier system, swivelling motor and electric lifting drive and two energy optimized blowers (each 5,5 kW motor performance).
Optional frame model: DURAPROTECT
51
Drying zone Textile drying aggregates
Drying portal Evolution EVO-4S, 2 cylinders and 1 crossmitter The 2 front mounted side cylinders dry the the vehicle’s front, side and rear. The right cylinder’s (EVO-1 cylinder) opening movement is controlled by active power measurement on the electric brush drive, brush pressure controlled by a tension spring system. The left cylinder (EVO-4 cylinder) opens mechanically on the vehicle’s front by the vehicle’s forward pushing movement and follows in on the rear area mechanically because of the adjustable slanted position of the X-Rail travelling tracks (centre crossover). The electrical crossmitter then dries horizontal and upper side surfaces of the vehicle.
52
Drying portal Evolution EVO-1, 3 Cylinders The Follow-UP roof brush dries the horizontal surfaces and the rear area of the vehicle. The Cylinder ascends via an electric lift drive at the vehicle front and pursues the vehicle rear (pneumatic angle adjustment). The contouring side cylinders dry the vehicle front, side and rear areas. Cylinder opening controlled by active power measurement on the electric brush drive, Brush pressure controlled by a tension spring system. By using the special SENSODRY material a certain gloss effect is reached on the surface.
53
Drying zone Textile drying aggregates
Drying portal Evolution EVO-1, 2 cylinders and 1 crossmitter (comparable to Page 34)
54
Dryingmitter swinging crosswise, free-standing Sturdy frame made from galvanized steel with duplex powder coating and plastic doors. The electrically driven drying mitter with its 4 DURAPROTECT receiving rockers for drying textile moves crosswise to the conveying direction of the vehicle. The mitter is installed following the blowing dryer. Its textile strips dry up remaining water drops on the vehicle’s horizontal and upper side surfaces.
Drying zone Drying strips
TEDDYTEX® Drying strips In this model, the Teddytex strips are mounted in the dryingmitter’s 4 rockers and are attached in the clamping strip. Clamp strips are opened when changing out the material. Drying strips are exchanged and are clamped down again.
TEDDYTEX®-MICROTEX-Drying strips with active change system „Active change systems“ – basic carriers are mounted in all 4 rockers, in which the drying strips are mounted. Drying strip ends are simply pulled down and moist ends heavy from wetness slide up. Two-coloured textile stoppers prevent them from slipping out of the basic carrier and show the personnel, which strips have alreay been switched out. This enables material exchange even while the machine is in operation. Trimming: Teddytex strips for the front two rockers, extra absorbent Microtex strips for the back two rockers.
The rocker strips are washeable in the wash machine and can be dried in the wash dryer.
Control technique Switchgear unit and unit control
Control cabinet A guarantee for secure unit control and unit monitoring.The free stored programmable
control (SPC) can easily be altered or updated at any time. The SPC, the complete wired 400V-electric power section
the motor protection switch and the frequency converter are protected and contained in a painted sheet steel switchgear cabinet.
User terminal (rugged version with steel buttons)
User terminal The user terminal for wash tunnels is available as rugged version with a stainless steel casing and illuminated stainless steel buttons or as a high-end touchscreen version. Both versions include a stainless steel case and are available with wall mount or foot mount (for dowelling).
User terminal (high-end version witch touchscreen
Control technique Wash tunnel PC-System with Software WASH-OFFICE
Wash tunnel PC-System Complete PC-System, adjusted for operation in wash tunnels and installation of the software CHRIST WASHOFFICE.
The system includes PC with monitor, keyboard, mouse and printer. The PC-System is connected with the wash tunnel control.
Software CHRIST WASH-OFFICE Software characteristics: wash data registration,
error diagnosis, configurations and settings in service areas.
Cashier system Consultation by wash professionals Characteristics of the software package Christ Wash Manager (Backoffice administrative server): • Company and private customer address admini stration • Active profit control and evaluation • Price and bonus scaling, happy hour function • Targeted marketing promotions, complete statistics • Data security through personalisation of customer cards Wash-Manager – Customer loyalty with system Professional customer loyalty system with loyalty cards (prepaid cards with integrated transponder as value or flatrate cards). Advantage: The wash customer identifies with your company due to the additional bonus credit (depending on the charged value). He will happily return and recommend your facility. This is fraud protected. With this system the marketing and staff planning can be optimized.
Features of service counter software:: • Simple operation • Direct program selection • Program is submitted directly to the wash tunnel • Advanced price management (e.g. happy hour) • Product group management for articles with barcode • Secure and consistent accounting, either cash payment (booked by staff via chip technology) or payment via loyalty card
All-in-one Wash Manager WT cashier system and customer loyalty Portable stainless steel operation counter with integrated touchscreen, electric cashier drawer, additional drawer, front doors and integrated desktop PC System with operator software for cashier personnel / pre-wash personnel. Reading devices: Card reader for transponder cards and additional barcode reader for scanning items with barcodes. Additionally includes complete bakkoffice administrative server with software package Christ Wash Manager
The cashier system is also available without service counter as „drive-in cashier“.
Backoffice administrative server with software package
/ Customer loyalty Service/Operation guidance developed for cashier
Basic view – screen locked
Register with personal chip
Price group selection (e.g. Happy-Hour)
Program selection + additional program
Payment with cash
Cash register opens automatically
Per customer card
Per EC-/Credit card
Input valorization amount
Confirmation valorization amount
Alternative payment:
Customer card valorization:
Equipment Rapid action door
Rapid action door Opens and closes precisely in front of and behind the vehicle via a light barrier system at a speed of 0,5 mtr./sec.. The rapid action door can be designed to be flush to the hall on the sides and with an integrated escape door when desired. It can also be installed at the wash tunnel exit.
60
Equipment Light pylons
LED light pylon „program confirmation“ with integrated LED price display
Exit light, illuminated pylon with integrated LED light
LED light pylon „program confirmation“ (without price display)
High-grade: Exit light, PREMIUM, RGB-LED
FONTIS Water recycling units
Water is a precious natural recource and musst be used sparingly. Drink water is too valuable to be used for washing vehicles. Which is why it makes most sense to recirculate water used for washing vehicles. Increasing fresh water supply and drainage costs are pushing car wash operators to seek a solution to these environmental and financial diemmas.
Fresh Water Recycled Water
Aut. back rinse
Gravel filter 1
Gravel filter 2
Air Compressor Back rinse Alimentation pump Membraneaerator
Submersible pump
Membraneaerator
62
Drainage tank
Sludge trap 2
Sludge trap 1
Recycled water tank with membraneaerator
Flow pressure controller
SPS-Control unit Automatic filter cleaning
Air compressor
Dosing device flocculant (option) Dosing device sodium hydroxide (option)
Base frame Quartzgravel filter 3-D-Graphic of the Fontis-L
MODEL FONTIS-M
QUARTZ GRAVEL FILTER 1
FILTER CAPACITY
STORAGE TANK
10.000 l/h (166 l/min)
1.000 Liter
FONTIS-L
2
20.000 l/h (333 l/min)
2.000 Liter
FONTIS-L+
2
30.000 l/h (500 l/min)
3.000 Liter
FONTIS-XL
2
40.000 l/h (666 l/min)
3.000 Liter
63
Colour palette It’s time to get creative
Ultramarine blue RAL 5002 Sky blue RAL 5015
Fire red RAL 3000
Yellow green RAL 6018
Traffic green RAL 6024
Traffic yellow RAL 1023
Traffic orange RAL 2009
Pure white RAL 9010
Telegrey RAL 7047
White aluminium RAL 9006 Grey aluminium RAL 9007 Deep black RAL 905
Colour depictions and pictures are not correct colour representations. The specification of the colour tone according to RAL are close interpretations and can vary depending on surfaces and materials.
In regards to Teddytex, we note that individual white fibers are incorporated in the material (the colour specification is only related to the colour fibers)
AWS TEDDY/MICROTEX (Drying)
TEDDYTEX (Drying)
SENSODRY (Drying)
SENSOTEX (Washmitter)
TEDDYTEX (Washing)
SENSOTEX PREMIUM (Washing)
SENSOMIX (Washing)
SENSOFIL (Washing)
SENSOFIL (Waschen)
PE-Brush (Washing)
Arch/Pylon labelling
Plastic panelling
The standard wash tunnel paint colour is grey aluminium RAL 9007
Wash Material POLYETHYLENE Brush For unit concepts where simple and cost-effective wash technology is of main importance. • Normal material strength • Highest cleaning performance • Average material abrasion on the vehicle’s surface
ep rüf t
SENSOFIL+ (foamed polyethylene) For unit concepts where gentle washing is of main importance. • Increased material strength • Good cleaning performance • Low material abrasion on the vehicle’s surface g
AC AD
ep rüf t
SENSOMIX (50% foamed / 50% needled polyethylene) For unit concepts that require highest quality with textile wash technology. • High stability • High cleaning performance (high rotations per minute possible) • Close to no material abrasion on the vehicle’s paint surface • Higher grade of gloss on the vehicle’s paint surface
AC AD
g
SENSOTEX+ (needled polyethylene) For unit concepts where high quality with textile wash technology is of main importance. • Increased material strength • Increased cleaning performance • No material abrasion on the vehicle’s surface • Highest gloss degree • May be advertised as “Textile Car Wash” SENSOTEX-PREMIUM For unit concepts where highest quality with textile wash technology is of main importance • Characteristics of SENSOTEX+, but with • Padded fiber structure (three-dimensionality) • Lowest sound development • Especially developed for high-performance wash tunnels
TEDDYTEX® (Microfiber-Textile) For unit concepts where highest quality with textile wash technology is of main importance. • Open fiber structure (three-dimensionality) • Ideal for polish brushes • No material abrasion on the vehicle’s surface • Highest gloss degree • Marketing advantage in comparison to competitor wash
65
Wash tunnel concept Evolution Short wash tunnel, premium model Pit length: 18.450 mm (minimum) Operation concept: Serviced wash tunnel Capacity: Up to 50 cars / hour
Clear water rinse-system, mounted front-side on aluminium arch (Page 44)
Polishing spray device, aluminium arch, non-illuminated (Page 32)
Wash portal Evolution EVO-1, 3 cylinders (Page 36) Foam spray device, aluminium Premium arch (Page 12)
Plastic plate correlator (Page 11) Wheel and
Middle pressure spray device (Page 24)
Rim spray device, free standing (Page Wheel correlator (Page 09)
Drying mitter, swinging crosswise, free standing (Page 54) Dryer AEROFLEX-3 (Page 51)
VAN-dryer (Page 50)
Seperation system, who swinging doors, flap door Conservation spray device, alu-arch, with LED-illumination (Page 45) Contour wash unit KONTEX, 2 cylinders, wash unit 1.100 m, stainless steel (Page 25) Wash protal, Evolution EVO-1, 3 cylinders (Page 36)
Wheel-/ sill wash high-pressure-TIREJET, stationary (Page 19) sill wash device, longitudinal (Page 22)
for front, under-body and rear
14)
67
Wash tunnel concept Evolution High level, premium model Pit length: 26.575 mm (minimum) Operation concept: Service wash tunnel Capacity: up to 80 cars / hour Clear water rinse-system, mounted side on aluminium arch (Page 44)
Plastic plate correlator (Page 11) Foam spray device, aluminium Premium arch (Page 12)
Middle pressure spray (Page 24)
Rim spray device, free standing (Page 14)
Wheel correlator (Page 09)
Drying mitter, swinging crosswise, free standing (Page 54)
Dryer AEROFLEX-1 (Page 49)
front-
Pre-dryer AEROPRO (Page 48)
Seperation system, who swinging doors, flap door Conservation spray device, alu-arch, with LED-illumination (Page 45)
Wheel-/ sill wash device ROTATION, DURAPROTECT (Page 20)
Wash portal combination Evolution EVO-4S, 6-cylinders (Page 42)
device for front, under-body and rear
69
Wash tunnel concept Evolution High level, premium model Pit length: 46.075 mm (minimum) Operation concept: Express Capacity: up to 110 cars / hour
Wash portal Evolution cylinder (roof) Clear water rinse-system, mounted front-side on aluminium arch (Page 44) Wash portal Evolution KINEMATIC, cylinder (roof) (Page 28)
Wash portal Evolution EVO-4, 2 cylinders (Page 30) Wash portal Evolution KINEMATIC, cylinder (roof) (Page 28) JETSTREAM-EXPRESS (Page16) Middle pressure spray device for front, under-body and rear (Page 24) Contour wash
Foam spray device, aluminium Premium arch (Page 12)
Wheel and sill wash
Wheel-/sill wash device, MATRIX Double chain conveyor Typ 360 (Page Arch cladding (side and top) with door Chemical-spray device (Page 15) Rim spray device, free standing (Page 14) Wheel correlator (Page 09)
Drying unit Evolution EVO-4S (Page 52) DryerAEROFLEX-1 (Page 49)
Pre-dryer AEROPRO (Page 48)
Action door (Page 60)
KINEMATIC, (Page 28)
Rapid action door, flush side to hall, excape door Conservation spray device, alu-arch (Page 45) Contour wash device VAN-KONTEX (Page 25) Protect-shine polishing spray device, alu arch (Page 32) Wheel and sill wash device, longitudinal (Page 22)
Wash portal Evolution EVO-4, 2-cylinders (Page 30)
device, MINI-KONTEX (Page 25) device, longitudinal (Page 22)
(Page 21) 10)
71
Everything from one hand from Christ’s wash factory Our assortment: • Roll-over wash units • Wash tunnels • Water recycling units • Self-service wash systems • Truck wash units • Wash units for rail vehicles • Self-service vacuum cleaners • Advertising material and accessories for car washing • Car wash and care products
Our services: • Limited site analysis • Profitability calculation • Projection assistance • Operator trainings • Financing concepts • Marketing assistance
• Our area-wide service network guarantees fast help. • Fast supply of wear and tear and replacement parts
Otto Christ AG Wash Systems P. O. Box 1254 87682 Memmingen GERMANY Tel. +49 83 31 857-0 Fax +49 83 31 857-249 www.christ-ag.com export@christ-ag.com