Solid Timber Pallet Boxes Planning & Design Guide

Page 1

SOLID TIMBER PALLET BOXES P lanning & D esign G uide V1 / 16.03.23 / PRODUCT DEVELOPMENT & DESIGN DEPARTMENT / RS
CONTENTS This comprehensive solid timber pallet drawer box guide is split into 2 key sections: 1. DESIGN 2. PLANNING & INSTALLATION SECTION 1 Design SECTION 2 Planning & Installation 06 08 09 04 05 In-frame Mock In-frame Lay-on Introduction Product Specification

Solid Timber Pallet Boxes

Our solid timber pallet boxes embrace a resurgence in timber. They are designed to be planned within open feature units across lay-on and in-frame planning configurations.

Available in 3 widths (400/500/600mm), these are ideal for storing a plethora of food items including fresh vegetables, spice jars and other dried pantry items.

THIS GUIDE...

This guide will detail recommended planning configurations across lay-on and in-frame configurations including suggested drilling patterns.

When selecting your solid timber pallet box, please consider the following:

- Specification (lay-on or in-frame)

- Desired width (400/500/600mm)

- Configuration

Design & planning opportunities

The solid timber pallet boxes have been designed to be planned within open units across in-frame, mock in-frame, & lay-on.

Creating a bespoke timber look across 3 key kitchen styles:

Please see page 6 for further information on how to successfully achieve these key looks.

1909 Ovolo Range Shown in: Copse Green, In-Frame Walnut Pallet Drawer Box IN-FRAME
4
MOCK IN-FRAME LAY-ON

In-frame & lay-on offering:

The solid timber pallet boxes come in two specifications to enable successful planning across in-frame and lay-on kitchens, as detailed in the table below - please note pallet boxes are sold individually.

TOPTIP

Did you know? This specification should be used when planning a mock in-frame unit as 2 x packers are required to clear the frame, and the runners need to be concealed.

SEEPAGE

Planning & Installation can be found on pages 6 - 8

- Slatted front

- Integrated handle detail

- Solid back and sides

- Supplied with 2 x packers

- Features a 9mm overhang to hide visibility of runners

TOPTIP

SEEPAGE

Did you know? We have designed these pallet boxes to be planned in unison with our internal dovetail drawer boxes for added flexibility.

Planning & Installation can be found on page 9

-

- Integrated handle detail

- Solid back and sides

- Compatible with our internal dovetail Drawer boxes

LAY-ON LAYON Order code VB*HB/W VB*HBNT Depth 456mm 456mm Height 184mm 184mm Available widths 400, 500, 600mm 400, 500, 600mm Finish Washed Oak Walnut Additional
Slatted
front
IN-FRAME IN-FRAME IFVB*HB/W IFVB*HBNT Order code 456mm 456mm Depth 184mm 184mm Height 400, 500, 600mm 400, 500, 600mm Available widths Washed Oak Walnut Finish
Additional
targetnI e d s callopedhandle dettalS d r a wer front 5 targetnI e d s callopedhandle dettalS d r a wer front 2x Packers 9mm overhang

In-frame planning & installation

The in-frame solid timber pallet boxes have been designed to sit within a frame including standard door set frames and drawer pack frames. These need to be ordered separately as a set with the door/dresser removed upon installation. Alternatively you can use frame profile to create a frame.

PACK RUNNERS OFF CABINET USING IN-FRAME DRAWER PACKERS (supplied)

Door Set planning

Cabinet Drilling requirements for packers

Cabinet side panel drilling to suit Movento (Blum) runners (dimensions are from the front edge of the cabinets)

Range: 1909 slab Shown in: Putty

SEAMLESS LINING THROUGH Designed to maintain equal spacing between drawers to create a seamless aesthetic.

In-frame kitchens are compatible with our solid timber pallet drawer boxes, using the Blum Movento undermount runner system (MOV450/60). All solid timber pallet drawer boxes come supplied with a 25mm thick packer, enabling the drawer box to bypass the fixed frame. Fix the packer to the inside of the cabinet, by screwing through the 4 x countersunk holes. Then fix the runner to the packer.
12.5 25 50 37 37 160 160 32
The below technical illustration shows drilling measurements of the packer, for use with timber dovetail drawer boxes.
Countersunk holes to fix spacer to inside of cabinet
Fixing holes for runner attachment
160 32 160 37 47 505 276 720 18
6

2 Drawer Set planning

Cabinet Drilling requirements for packers

Cabinet side panel drilling to suit Movento (Blum) runners (dimensions are from the front edge of the

3 Drawer Set planning

Cabinet Drilling 318

for packers 720 18 589

Range: 1909 Ovolo

in: Putty

1x 2 Drawer Pack Frame Order your 2 drawer pack separately and replace fascias with pallet boxes upon installation.

Range: Clarendon Shown in: Slate

1x 3 Drawer Pack Frame Order your 3 drawer pack separately and replace bottom 2 fascias with pallet boxes upon installation.

Shown
160 32 160 37 47 399 720 18
cabinets)
7
requirements
Cabinet side panel drilling to suit Movento (Blum) runners (dimensions are from the front edge of the cabinets) 160 32 160 37 47

Mock in-frame planning & installation

The in-frame solid timber pallet boxes should be used when planning mock in-frame kitchens. Creating a Mock in-frame to house the pallet boxes can be achieved using frame profile which can be ordered separately. 2x packers are required and supplied to allow the pallet box to clear frame.

PACK RUNNERS OFF CABINET USING IN-FRAME

DRAWER PACKERS (supplied)

Mock in-frame planning

Cabinet Drilling requirements for packers

Cabinet side panel drilling to suit Movento (Blum) runners (dimensions are from the front edge of the cabinets)

Range: Hunton Shown in: Dove Grey

EASY OPENING

Ergonomically spaced to enable easy opening without the need of a handle, maintaining a seamless look.

160 32 160 37 65 505 285 720 18
Mock in-frame kitchens are compatible with our solid timber pallet drawer boxes, using the Blum Movento undermount runner system (MOV450/60). All solid timber pallet drawer boxes come supplied with a 25mm thick packer, enabling the drawer box to bypass the fixed frame. Fix the packers to the inside of the cabinet, by screwing through the 4 x countersunk holes. Then fix the runner to the spacer.
12.5 25 50 37 37 160 160 32
The below technical illustration shows drilling measurements of the packer, for use with timber dovetail drawer boxes. Fixing holes for runner attachment
8 1x 3 Drawer Pack Frame Order your 3
and
Countersunk holes to fix spacer to inside of cabinet
drawer pack separately
replace bottom
2
fascias with pallet boxes upon installation.

Lay-on planning and installation

The pallet boxes have been designed to sit flush with the cabinet gables. We recommend matching your cabinet to the solid timber drawer boxes. In addition, these pallet boxes can be planned in unison with our internal dovetail drawer boxes for added flexibility as detailed below:

Cabinets housing the lay-on pallet boxes should be pulled forward to sit flush with adjacent fascias.

Lay-on planning

Cabinet Drilling requirements for runners

Cabinet side panel drilling to suit Movento (Blum) runners (dimensions are from the front edge of the cabinets)

Range: Hunton Shown in: Hartforth Blue

FLUSH TO CABINETRY
720 224 53 18 256 32 535 297 59
Pallet boxes and cabinet sit flush to adjacent units,
9 1 x
2 x Internal 2 x
1 x Internal 3
NOTE
Pallet
Pallet
x Pallet
Station Road, Aycliffe Business Park, Newton Aycliffe, Co. Durham, DL5 6EQ

Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.