15
www.lsf-association.co.uk
Flooring LSF components are used to form structural floors in load-bearing structures. LSF floors can also be used in volumetric modular construction where floors are formed from a double deck system of a floor and ceiling combination. Refer to Section ‘Components for Modular Construction’ later in this guide for more details. Formed as either steel joisted floors or as composite concrete floors in ground floor applications if part of the LSF system, together with separating and intermediate floors. Joists are formed from galvanised steel plate up to 2.5mm gauge from joists at a maximum of 600mm centres. All floor types are underlined to provide fire and acoustic performance and overlaid with a floor finish. Loads that need to be accommodated vary when used in either domestic, commercial or communal areas. Corridor floors are often designed using a shallower depth as the span is reduced but increased loads need to be accommodated. Enhancements are required to the floor build-up such as floating floors and acoustic ceilings to achieve the acoustic performance. Refer to Section ‘Elements Used in Conjunction with LSF’ in this guide for more detail. LSF manufacturers and lining board providers have fully tested load-bearing floors to BS EN 1365-2.
When designing floors to be used in LSF structures it should be noted that: • Early identification of any elements that may add loads to the structure and any penetrations that may be required within structural elements to accommodate services etc. This early design input is essential to avoid cutting additional holes in to studs post installation. • When LSF structures are used to form ground floors the protection to the steel will need to be increased and the level of galvanisation may also need to be increased. Some warranty providers may require the steel to be kept a minimum of 150mm above external ground level. • Ground floor components should be kept warm, insulated and membranes incorporated in line with the requirements of a condensation risk analysis.
Fusion Building Systems cassettes
For further information on LSF flooring go to: www.lsf-association.co.uk/library/lsfa-specification-and-engineering-guide/lsf-flooring
