22 minute read
Offsite Expo 2021
OFFSITE EXPO: THE HOME OF OFFSITE TECHNOLOGY INNOVATION
The construction sector is at a critical crossroads - offsite technology is now recognised as providing the most important solution to overcome many of the challenges facing the industry today.
Bringing together the sector’s most influential innovators who are driving change in the construction industry, OFFSITE EXPO provides fast and efficient access to a wealth of knowledge and offsite innovation. By attending this one highly focused event, construction professionals can gain a broad spectrum of offsite industry intelligence and practical insight – all under one roof.
Taking place at the Ricoh Arena,
Coventry on 21 & 22 September
2021 – OFFSITE EXPO is the focalpoint of innovative building and digital construction technologies. Presenting a compelling proposition, OFFSITE EXPO will feature a combination of advanced manufacturing approaches and smart digital construction technologies. With innovative displays, live demonstrations, and pioneering speakers – the event will play host to leading experts, offsite manufacturers and component suppliers showcasing a broad spectrum of panelised, volumetric modular systems, pod and prefabricated MEP solutions.
The last OFFSITE EXPO exceeded expectations attracting almost 3,000 unique visitors, over 100 professionals with purchasing power participated in the Offsite Connect Buyers and Specifiers Forum, in excess of 100 exhibiting companies promoted offsite solutions and smart technologies and more than 40 hours of CPD Accredited presentations took place. The feedback was universal - OFFSITE EXPO was acknowledged as featuring the most informative and inspiring content.
Explore: Offsite Technologies
The case is unequivocal – offsite technology challenges outmoded construction practices and is a progressive and productive step that is set to revolutionise the way buildings are designed and assembled. Every major review of the construction industry has in some way recommended a move towards advanced factory-based construction methods.
This specialist offsite technology event is destined to become Europe’s largest dedicated event, providing direct access to explore this innovative and fast-moving sector. Get to grips with the latest offsite methods and smart digital technology – OFFSITE EXPO showcases the widest and most comprehensive display within the built environment including but not limited to:
• Framing Solutions in Concrete,
Timber and Steel • Modular Volumetric Systems • Bathroom and Kitchen Pods • Pre-engineered MEP Building
Services • Prefabricated Building Components • Digital/ BIM/Augmented Reality (AR)/ Virtual Reality (VR)
Expertise: CPD Accredited Masterclasses
Presenting the optimum personal development opportunity – rapid and efficient access to the latest information is crucial to success. Advanced offsite approaches and innovative technologies are changing the face of construction, the Offsite Masterclass Theatres provide over 40 hours of CPD Accredited presentations in a dynamic and interactive format for those looking to learn direct from eminent offsite industry experts.
For more information, visit: www.offsite-expo.co.uk/masterclasses
BUYERS AND SPECIFIERS FORUM EXPECT – BUSINESS DEVELOPMENT OPPORTUNITES
The Offsite Connect Forum is the most dynamic ‘meet the buyer’ business development opportunity of the year. OFFSITE EXPO exhibitors can gain access to key industry professionals with a buying or specifying remit. This Forum offers a structured, highly effective way for new and existing offsite industry suppliers to connect with potential customers easily and cost effectively in highly focused meetings.
The greatest success of the 2019 event for many, were the business development opportunities secured in the Offsite Connect Buyers and Specifiers Forum, which was a hive of activity and open exclusively to exhibitors. With over 100 buyers and specifiers participating from high profile construction companies such as Mace, Willmott Dixon, Kier, Balfour Beatty, Galliford Try and the NHS – over 330 business meetings took place and feedback from both the buyers and exhibitors has been outstanding.
Participating buyer, Julian Humphreys, Programme Manager at Community Health Partnerships said: ‘Offsite Connect was a very useful forum that enabled contact with organisations associated with the offsite market, and I established a number of new connections. The offsite market is expanding, and the event provided the ability to explore new opportunities and new products at a single location, making OFFSITE EXPO a very efficient and cost-effective method of networking.’
If you have influence over procurement or specification decisions and would like to take part in structured, highly effective meetings with new and existing offsite industry suppliers, email Jessica Holland on: jessica.holland@radar-communications.co.uk
2021
Exposure - Offsite Awards
It is not only the exhibition that has exciting development plans, for the first time OFFSITE EXPO will host the dynamic and innovative Offsite Construction Awards at this new high-profile location. Taking centre stage, the Offsite Construction Awards will take place at OFFSITE EXPO on 21 September 2021. Since inception seven years ago, the Awards have been on an upward trajectory presenting professionals operating in the sector with outstanding opportunities to showcase excellence and network with those who are gaining industry recognition.
For more information, visit: www.offsiteawards.co.uk
Experience - The Offsite Event of the Year
Showcasing the greatest display of offsite building and digital construction technologies under one roof, OFFSITE EXPO aims to attract circa 5,000 delegates and is geared towards creating the ultimate visitor experience. New for 2021 and hosted by Cogent Consulting the ‘Ask the Expert’ guided technical tours will allow OFFSITE EXPO VIP visitors the opportunity to meet one-to-one with leading industry experts and discuss live projects and explore design efficiencies, engineering challenges and supply-chain development opportunities. OFFSITE EXPO is the place for people to engage with key industry contacts, acquire new knowledge and network in vibrant surroundings.
Health and Wellbeing
The health and wellbeing of all attendees, speakers, exhibitors and staff are the event organisers top priority. Measures are being put in place so that the exhibition and Offsite Awards can take place in a safe and controlled manner.
Get Connected
To join the offsite conversation, become a member of the Explore Offsite Linkedin Group: www.linkedin.com/groups/7456674 Or to stay up to date with the latest announcements – follow #OffsiteExpo on Twitter at @ExploreOffsite
Get involved as an exhibitor or sponsor
With over 75% of the inaugural exhibitors and sponsors rebooking for the 2021 event, construction businesses are advised not to leave it too late to book promotional packages to ensure they maximise this highly targeted business opportunity.
Here is just what one exhibitor had to say about OFFSITE EXPO: “We had an excellent couple of days exhibiting at OFFSITE EXPO. The quality of visitors and the seminars were outstanding. Great to make so many new contacts and what a way to showcase our Thrubuild® range of complete walling solutions. It was a thoroughly productive couple of days.’ Steve Thompson, Managing Director, EOS.
For more information on getting involved in OFFSITE EXPO 2021 as an Exhibitor or Sponsor contact Amy Pryce on 01743 290001 or email: amy.pryce@radar-communications.co.uk
TECHNICAL DESIGN SERVICES GROUP EXPANDS OFFSITE CAPABILITIES ONCE AGAIN
THE IMPORTANCE OF MODULAR CLADDING IN THE FUTURE OF CONSTRUCTION
Across the industry, 2020 was the year that saw interest in offsite construction methods surge. That was certainly true for the Technical Design Services Group (TDSG), which has seen expansion across all three businesses to meet the growing demand for its engineering, design and training services.
With the explosion of new buildings going up in the last few decades, the construction industry is always looking for faster, more efficient and cost-effective ways of creating highrise buildings that don’t compromise on aesthetics.
The group, which officially brought TDS, Design4Structures and Cadcoe together in 2019, have always held the profound belief that digital transformation and better collaboration are two of the main drivers for an, efficient, viable and secure industry. With two in-house divisions specialising in offsite design, it has been poised to make this drive for change early on.
TDSG has recently welcomed several new design engineers, who will work for both TDS and Design4Structures. All, are highly experienced LGSF Engineers, previously working on projects across multiple sectors.
The traditional way of building may still be popular, but too time consuming for some projects. This is where modular cladding systems using lightweight materials come into their own.
The advantage of going lightweight
As a prime example of popular architectural design, brickslips provide the aesthetic quality that we all associate with traditional brickwork, with many added benefits. They allow designers a lot more freedom in building features and the method of primary construction on the build. A prime example is that Mechslip can be used in curtain walling, or modular cladding panels to blend in with areas that are masonry but can’t Cadcoe has also witnessed an increase in demand for apprentices within offsite manufacturing during the past 12 months. With part of its intensive CAD training dedicated to design for MMC, it has a growing portfolio of clients looking to future-proof and access its growing pool of digital talent. The evidence this is an effective way to recruit? Five of its previous Apprentices, are now full-time CAD Engineers primarily working within the offsite teams at TDSG.
The Technical Design Services Group will be exhibiting at the Offsite Expo on the 21st September 2021 at the Ricoh Arena where they will be
be built with bricks. This gives an easy transition from traditional to modern construction without compromising on the quality of the look. ready to discuss your next project or recruitment drive.
Visit www.tdsg.co.uk to learn more about TDS, Design4Structures and Cadcoe.
For more information on Mechslip brick cladding visit – www.mechslip.co.uk
STAND NO: C05
Design possibilities with modular cladding
Significant savings can be made with materials like brickslips. The materials chosen will vary and tend to be more costly than traditional bricks and mortar at the start, but the cost benefit is realised is in the early engagement with manufacturers and installation. The systems are considerably lighter than traditional bricks, weighing in at 80kg per square metre less than bricks. This results in lighter loading, which in turn reduces the foundation depth, installation is quicker too!
STAND NO: C14
TAKING A COLLABORATIVE APPROACH
A long-lasting bathroom installation relies on each component working as part of a system which is why tile and stone protection experts Schlüter-Systems create products which perform best when used together.
From the BBA certified tile backerboard Schlüter-KERDI-BOARD to the recently launched low height version of the shower board SchlüterKERDI-SHOWER-LTS, their product portfolio, which also includes tile trims, underfloor heating and wetrooms, can guarantee a reliable CE marked waterproof system is achieved every time.
Hosting a suite of RIBA accredited CPD seminars online has also positioned Schlüter as leaders within the construction sector, offering architects and specifiers a fantastic way of learning about best practise through engaging seminars. Each seminar provides a detailed look into a specific area, and the intention is to come away armed with the tools and confidence to install products with ease. Training aimed at contractors is also available, offering application focused sessions designed to give contractors handson experience with installing Schlüter products. This delivery of product and specification expertise, paired with their ongoing support of some of the offsite industry’s most prominent companies means that you can trust Schlüter’s team of specialists when it comes to system solutions. Whether this is through the creation of CAD drawings at the specification stage or providing onsite technical support to a multitude of different projects, they are on hand to help the offsite industry grow and develop.
For more information visit: www.schluterspecifier.co.uk
STAND NO: C15
Think offsite. Think systems. Think Schlüter.
Your experts in tile & stone protection.
It is essential that the bathroom products you choose work together to offer a reliable and long-lasting installation. This is why our solutions work best when used as part of a system. Our extensive portfolio includes trims, underfloor heating, waterproofing and uncoupling products. When it comes to service, you can rely on us to deliver above and beyond with design and technical support throughout the duration of the project and bespoke extended warranties available to ensure you have complete peace of mind. Visit us on stand C15 at the Offsite Expo to find out more about how we can help. www.schluterspecifier.co.uk
BRE is the world’s leading, multi-disciplinary building science organisation: an innovative group of researchers, scientists, engineers, and technicians who contribute to a thriving and sustainable world, by developing science-led solutions to built environment challenges.
Newtons Connect™ is a unique approach to modular MEP designed to maximise off-line production, reduce labour spend and improve quality- all with the purpose of driving efficiencies and getting more modules out the door!
We use independent cutting-edge research to generate new knowledge and to develop our range of products, services, standards, and qualifications which are used around the world, including by the UK government.
We pride ourselves on being able to provide the answer to virtually any construction-related testing question.
David Gall is the Project Manager developing a new “industry-plus” BRE Product Standard for modular homes and he will be speaking at Offsite Expo on 21 September 2021, in the Training, Skills & Innovation session on ‘BPS 7014, an overview of BRE’s new standard and certification scheme for Offsite Modular Construction’. BRE is a world leading, multidisciplinary, building science centre with a mission to improve buildings and infrastructure, through research and knowledge generation.
For more information visit: www.bregroup.com
STAND NO: C09
It combines our protected ‘plug-andplay’ MEP products, bespoke modular installation training programme and our exclusive data gathering systems. All to provide a turnkey solution for modular MEP.
Newtons Connect is part of the Newtons Group. An established M&E company working across the modular, projects and facilities management industries.
We operate as your specialist service partner. Providing a full service approach to MEP. Fitting within your existing management structure so we are equally held accountable as any other department. We begin with an assessment of your M&E design, working with your existing design team to maximise ‘off-line’ pre-fabrication, and implement modular products and methods that save time and money. We can also develop drawings to construction issue at your request.
Our modular supervisors prepare and present operating procedures, quality control measures, health and safety monitoring and data reporting processes that are essential for the efficient running of the factory floor. When this is approved, our engineers get to work on delivering quality M&E installations for your projects. We know that feedback is essential for continually improving efficiency and working as part of a larger production line. We provide real time data alongside our formal weekly and monthly reports on output, savings, issues, and modular research & development progress.
For more information visit: www.newtonsgroup.co.uk/modular
STAND NO: H12
OFF-THE-SHELF AND CUSTOM MODELLING SOLUTIONS FOR LIGHT GAUGE STEEL OR WOOD FRAMING SYSTEMS
It all starts at the design stage with MWF or Metal Wood Framer - our flagship solution, the ultimate add-on to Revit®. Now complying with the latest energy efficient & green building methods in use today, MWF allows users to model virtually any light gauge steel or wood framing system while simultaneously creating schedules, material cut lists, framing elevations, and fully dimensioned 2D shop drawings.
The software can then export wall, floor, and truss framing data, directly into a format which is readable by your company’s roll forming machine and automated wood saw. Knock-outs, hole cuts, dimples and more operations are supported when using MWF in conjunction with our CNC Modules.
Builders can then manage every aspect of panel design, scheduling, delivery and machine output from any web enabled device using ONYX, our cloud manufacturing tool. With important data flowing back from the shop floor to the management software and easy collaboration from the design team, ONYX enables managers to fully control and access projects from anywhere at any time with up-to-date information at their fingertips.
Contact us today to find out how our off-the-shelf or custom solutions can benefit your next project by emailing us at info@strucsoftsolutions.com
STAND NO: F09
WE MAKE LIFE BETTER ON-SITE BY WORKING OFF-SITE
Saint-Gobain believe the construction industry can use off-site manufacture to improve quality, maximise supply chain efficiency and enhance sustainability performance during and after construction.
Speak with us and our specialist brands - International Timber, INTRASTACK, Pasquill, Roofspace Solutions and Scotframe - to discuss your next off-site building project.
Find us at stand G3 www.offsite.co.uk
CE AND ETA APPROVED PRODUCTS THAT CONFORM TO CPR REGULATIONS
Not all screws and connectors are the same, 17 years within the offsite manufacture construction fastener supply business, has taught us at TT FIXINGS, that the supply of fasteners and connectors is not all about price, it has to be a Technical led product, with local manufacture and support on all the products.
Stock on hand within central England, allows rapid delivery times to the whole of the UK, without costly site delays. For TT FIXINGS the Screws from SCHMID SCHRAUBEN, and Connectors from SHERPA, fit perfectly with the demands of UK construction, technically superior in the market, and constantly evolving their own manufactured product ranges.
European manufactured product gives closer control over product availability, with shorter lead times, and flexibility to react quickly to projects. Full support, prior to, and during the construction process ensures a level of technical and practical assistance, ensuring the correct products are specified and installed.
Designers, Architects, and end users are assured that the fully approved products on offer, can meet any demands required by a project, with the highest level of technical support through recognised ETA approvals, within the UK.
Underpinned by direct partnerships with the manufacturers within Austria. TT FIXINGS has the right product, knowledge, people, and experience to be your supply partner in today’s evolving OFFSITE manufacturing and Construction industry.
For more information visit: www.ttfixings.co.uk/products 01773 833338 timber@ttfixings.co.uk
STAND NO: A09
INNOVATIVE TOILET FLUSH WITH VORTEX POWER
TwistFlush: More cleanliness, less water consumption - the new revolutionary TwistFlush toilet flush delivers extra clean and hygienic flushing results while being exceptionally water efficient.
The secret: the patent-pending TwistFlush technology uses the physical force of a controlled water vortex, which flushes almost all of the inside of the toilet bowl while carrying waste away. In turn TwistFlush uses the flush water much more efficiently and saves precious water every time the flush is activated.
Economical yet powerful
A sustainable lifestyle includes the conscious use of resources. A TwistFlush toilet that saves precious water every time it is used plays an important role in this. The toilet only needs 4.5 litres for a large flush and a mere 3 litres for a small one. And as the flush is so powerful, one flush is usually sufficient. This way, a fourperson family can save up to 19,700* litres of water a year. Moreover, the patent-pending flushing technology far exceeds standard requirements**: the controlled water vortex generates a very strong pull in a conic bowl. It reaches almost all of the inside of the toilet bowl while well and truly carrying waste away.
Practically brushless and easy to clean
Annoying toilet brushes are a thing of the past: TwistFlush thoroughly flushes the entire inner pan, and the smartly designed bowl with its steep and super smooth walls makes it difficult for dirt to stick. One more hygienic advantage: thanks to the sophisticated rimless shape, a TwistFlush toilet is quick and easy to clean. CeramicPlus and AntiBac make it even cleaner while reducing bacterial growth by 99.9%.
Prevents spray and aerosols
The controlled vortex power deploys the flushing water exactly where it is needed. This prevents spray and significantly reduces the formation of aerosols. Another advantage: TwistFlush is significantly quieter than a standard flush.
For more information visit:
www.villeroy-boch.com
STAND NO: F21
Offsite Expo will play host to the leading UK and international offsite manufacturers and component suppliers showcasing a broad spectrum of panelised, volumetric modular solutions, pod and prefabricated MEP solutions. Here is a sample of companies that will be at the Ricoh Arena in Coventry on 21 & 22 September 2021...
Across Europe and worldwide, BeA’s fastening technology, tools and consumables are the trusted choice for some of the biggest and best known names in offsite timber and light gauge steel frame manufacturing. BeA manufacture an extensive range of market leading choice of fasteners, nails, staples and tools. We offer customers an unrivalled range of manual, semi-automatic and fully automated fastening solutions. Using industry leading quality controls, BeA meet or exceed standards such as Eurocode 5.
For more information visit:
www.bea-group.uk
STAND NO: Z32
Constructing Modern Methods (CMM) is the result of a piece of research conducted with Bristol City Council to understand what resources might make the widescale adoption of modular housing solutions more feasible. In April 2020, a consortium of partners led by YTKO and including Bristol City Council, Bristol Housing Festival, BRE Group, and nine leading modular housing companies were awarded an Innovate UK grant for their project, Enabling Housing Innovation for Inclusive Growth. This is an 18 month programme working with multiple partners towards the delivery of a major Research, Development and Innovation (R,D & I) in the use of Modern Methods of Construction (MMC).
For more information visit:
www.westofengland.ytko.com/ constructing-modern-methods/
STAND NO: Z55
Currently growing their capabilities in the North East, CoreHaus, a social enterprise, believe building better can make economic sense and contribute to improving society. Utilising proven modern methods of construction intelligently to achieve their mission of transforming new build housing delivery. CoreHaus applies MMC categories 2+5 in a hybrid approach and brings experience from multiple industries including Automotive, Aerospace, Rail manufacturing and construction to adopt best practice, improve quality, develop skills and accelerate delivery within the built environment.
For more information visit:
www.corehaus.co.uk
STAND NO: F19
Experts in providing modular metal ramping and step units nationwide.
As the UK’s leading provider of modular metal ramps and adjustable step units, Easiaccess manufacture, supply and install a range of compliant access solutions. Our products are designed to provide stepped or ramped access to modular buildings, with minimal groundworks and in short timescales. The system is completely re-usable and can be reconfigured for different buildings and locations, providing a fast, cost effective solution, without compromising on quality.
For more information visit:
www.easiaccess.co.uk
STAND NO: J07
ESS modular is a leading modular construction company boasting more than three decades of experience in providing building solutions to the market. Since 2016, ESS Modular has more than doubled in size and directly employs over 220 staff across five sites and two manufacturing facilities in London, Manchester, Dublin, Belfast and Cork. The company has significant expertise in the residential, healthcare, commercial sectors and services the education sector through its specialist education business Spatial Initiative.
For more information visit:
www.essmodular.com
STAND NO: D14
Rapid construction, the smart way. The FRAMECAD® end-to-end design and manufacturing system helps you deliver large-scale cold formed steel (CFS) construction projects faster. FRAMECAD’s automated engineering and detailing software integrates with our world-leading factory control software and advanced roll-forming manufacturing equipment - giving you the technical tools to accelerate the construction process, increase productivity and accuracy, and reduce labour costs.
For more information visit:
www.framecad.com
STAND NO: E09
Net zero pioneer Futurebuild, will return to London’s ExCeL on the 01 – 03 March 2022. Futurebuild connects over 20,500 specifiers, decision-makers and disruptors with major brands and start-ups. Our mission is to cultivate cross sector collaboration to inspire the transformational change needed to propel the construction industry to net-zero.
For more information visit:
www.futurebuild.co.uk
STAND NO: Z16
ISO Spaces designs and manufactures relocatable modular units. The units are permanently-portable and are built to full UK Building Regulations, lasting up to 60 years with regular maintenance. Highly adaptable, our modular buildings offer a “building on demand” solution to wide variety of applications and sectors. ISO Spaces offers a full turn-key solution – a unified process that allows us to do as little or as much of your build project as your require.
For more information visit:
www.isospaces.com
STAND NO: J09
Since 1934, Lindapter International has pioneered the design and manufacture of steelwork fixings, providing a faster and more cost-effective alternative to on-site drilling or welding. On Stand J11 Lindapter will be demonstrating its latest steel-tosteel connection solutions for typical Offsite Manufacturing and Modular Construction applications including; connecting adjoining modular units together, securing framework for cable tray systems, connecting prefabricated balconies to buildings, securing steel base frames of modular buildings and for temporary connections during transportation of modules to site.
For more information visit:
www.lindapter.com
STAND NO: J11
Modular Building Automation BV designs and manufactures equipment for the offsite construction industry worldwide. Specialising in timber frame, steel frame and SIP construction of frames, elements and volumetric methods, we are well placed to support this growing sector with automation equipment. With our production facilities in the Netherlands, from where our equipment is designed and manufactured; our sales, distribution and technical support offices in the UK; and our worldwide network of dealers, we can provide individual machines, production lines through to complete modular factory installations.
For more information visit:
www.modularbuildingautomation.eu
STAND NO: H10
Modern Interior Wall Coverings for the 21st Century.
Reco is at the forefront of tiling innovation, offering an eco-friendly alternative to traditional tiling that provides tangible benefits to every project. The wide range of available tile patterns and designs ensures the successful delivery of even the most exacting of project specifications, giving superb, hard-wearing finishes at a fraction of the cost of tiles.
For more information visit:
www.recosurfaces.com/
STAND NO: A16
Wavin is a member of the Orbia Group, and is UK’s leading supplier of water management, plumbing, heating and drainage systems for the building and construction markets. Highly respected within the industry, Wavin has a reputation for innovation and leadership and has an extensive portfolio under its various brands - market leading OSMA above and below ground drainage, Hep2O hot and cold plumbing and underfloor heating, Hepworth Clay, and a wide range of Wavin stormwater management solutions for all application areas.
For more information visit:
www.wavin.com
