Bridgestone Data Book by Remexim Estonia

GENERAL INFORMATION RADIAL TIRE BIAS TIRE REMARKS & SPECIAL OPERATIONS O-RING, FLAP, RIM, VALVE, CONVERSION TABLES

ÂŠ2012 Off-The-Road Tire Department, Bridgestone Corporation, Tokyo, Japan All rights reserved. No part of this manual may be reproduced in any form by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from Off-The-Road Tire Department, Bridgestone Corporation, Tokyo, Japan. Notice: Although great care has been taken in producing this manual, we can accept no responsibility for any loss or damage resulting from undetected errors or misprints which may have occurred. Due to the constant advance of tire technology, the contents of this data book are subject to change without notice.

CONTENTS INTRODUCTION 1. Industry Standard ................................................................................................. 1 2. Application Vehicle Matching Chart ................................................................... 1

GENERAL INFORMATION 1. Structural Diagram ............................................................................................... 2 2. Definitions ............................................................................................................. 3 3. Classification ........................................................................................................ 4 4. Tire Markings ........................................................................................................ 6 5. Ton-Kilometer-Per-Hour (TKPH)........................................................................ 11

RADIAL TIRE 1. Tread Designs ..................................................................................................... 13 2. Application .......................................................................................................... 18 3. Technical Data .................................................................................................... 24

INTRODUCTION 1. Industry Standard Bridgestone Corporation has developed a wide range of tire patterns and specifications, so that the proper Off-the-Road tire can be matched to any vehicle, service, or operating conditions. Bridgestone’s Off-the-Road tires are designed and produced to meet the commonly accepted international standards, those set by the TRA (Tire and Rim Association) in the U.S.A., by the ETRTO (European Tire and Rim Technical Organization) in Europe and/or by the JATMA (Japan Automobile Tire Manufacturers’ Association) in Japan*. Load capacities, inflation pressures, dimensions such as overall tire diameter and width, as well as the relative rims and tube valves follow these standards. If a tire is to be used for a purpose other than that for which it is originally intended, please consult Bridgestone Corporation for advice. *Where differences exist between the TRA, ETRTO and JATMA standards, Bridgestone selects the most applicable.

2. Application Vehicle Matching Chart APPLICATION

BIAS TIRE 1. Tread Designs ..................................................................................................... 54 2. Application .......................................................................................................... 56 3. Technical Data .................................................................................................... 62

REMARKS & SPECIAL OPERATIONS 1. Remarks............................................................................................................... 80 2. Special Operations ............................................................................................. 82

OTHER SPECIFICATION 1. O-Ring Specifications ........................................................................................ 86 2. Flap Specifications ............................................................................................. 86

VEHICLE

Earthmover Service

Dump Trucks, Motor Scrapers, Articulated Dump Trucks, Coal Haulers, Logging Trucks, Other Mining Trucks, etc.

Grader Service

Motor Graders

Loader & Dozer Service

Front-End Loaders, Back-hoe Loaders, Skid Steer Loaders, Dozers, Shuttle Trucks, Load-Haul-Dumps, etc.

Mobile Crane Service (High-Speed)

All-Terrain Cranes, High-Speed Vehicles, etc.

Industrial Service

Straddle Carriers, Aircraft Towing Tractors, Container Stackers, Counter-balanced Lift Trucks, Mobile Crushers, Log Stackers, etc.

Compactor Service

Compactor, Road Rollers

Sand Service

Sand Service Trucks

3. Rim and Valve ..................................................................................................... 87

OTHER INFORMATION 1. Unit Conversion Tables...................................................................................... 94 2. Specific Weight (Approximately)....................................................................... 97 II

INTRODUCTION 1

GENERAL INFORMATION 1. Structural Diagram

2. Definitions

Off-The-Road Radial Tire (ORR)

2.1 Tire Size

2.4 Overall Width (OW)

The size of each tire is indicated by nominal width and rim diameter in inches and mm. Radial structure is indicated by the letter “R”. For some tire the aspect ratio is indicated by percentage.

“Overall Width” is the width of a new tire, including 24hour inflation growth, and including protective side ribs, bars or decorations.

2.5 Section Width (SW)

Example Radial Tire ; 40.00R57, 33.25R35, 445/95R25 Bias Tire ; 21.00-35, 45/65-45

Belt

Tread

Casing Ply

“Section Width” is the width of a new tire, including 24hour inflation growth and including normal sidewalls, but not including protective side ribs, bars, or decorations.

2.2 Star Rating, Ply Rating and Load Index

2.6 Static Loaded Radius and Width (SLR, SLW)

The load capacity of a tire is indicated by the star rating (in case of radial tire) and the ply rating (in case of bias tire). The load index is applied in countries where the ETRTO standards are used.

“Static Loaded Radius” is the shortest distance from the axle center to the contact surface of a tire and “Static Loaded Width” is the overall width of a tire, mounted on the approved rim at the specified inflation pressure and placed still and vertically on a flat board, and loaded with the specified load.

2.3 Overall Diameter (OD) “Overall Diameter” is twice the section height of a new tire, plus the nominal rim diameter, including 24-hour inflation growth.

Chafer

2.7 Original Tread Depth (OTD) “Original Tread Depth” is the tread depth of a new tire measured at the point of tread-indicator where available or one-fourth the width of the tire crown section from the crown center, including 24-hour inflation growth.

Overall Width (OW) Section Width (SW)

Off-The-Road Bias Tire (ORS)

Tread Width

Inner Liner Bead Wire Free Radius

Section Height (SH) Rim Flange Height

Breaker

Rim Width Overall Diameter (OD)

Nominal Rim Diameter Dual Spacing

Carcass Chafer

Static Loaded Radius (SLR)

Static Loaded Width (SLW)

GENERAL INFORMATION 3

3.2 TRA Classification and Corresponding Bridgestone Off-The-Road Tires

3. Classification 3.1 Uses and Characteristics of Off-The-Road Tires The characteristics that Off-The-Road tires must possess differ according to their function and the type of vehicles they are mounted on.

Off-The-Road tires are classified by the TRA as follows, and the names of the tread patterns of the corresponding Bridgestone Off-The-Road tires are described below.

TRA Classification

Type/Service

Function

Main tire characteristics required

Vehicles

Bridgestone Tread Pattern Radial Bias

Tread Type

E= Earthmover (Haulage Service) E-2

Traction

E-3

Rock

E-4

Rock Deep

E-7

Flotation

VUT VKT VSB VFT VHS VSW VLT VMT VTS VEL VRL VRF L317 VLTS VSNT VMTS VMTP VZTS VZTP VELSL VELS VRLS VREP VRDP VRPS VRQP VSJ

Rigid dump trucks

Articulated dump trucks

Earthmover

Transporting Coal haulers

Heat-resistance, Cut-resistance, Wear-resistance Shock burst-resistance

Rib Traction Rock Rock Deep

Off road trucks

Grader

Grading, Leveling Graders

RLS ELS2

SCP2

G=Grader G-1 G-2 G-3 G-4

Scrapers

WL RL VL2

RG GL FG RL

VUT VKT VSW VMTS

L=Loader & Dozer (Slow Speed Service) Traction, Maneuverability, (directional stability)

L-2 L-3 L-4 L-5 L-5S

Traction Regular Rock Regular Rock Deep Rock Extra-Deep Smooth Extra-Deep

VUT VKT VSW VLT VMT VJT VTS VLTS VSNT VSNL VSDT VSDL VSMS

GL FG RL VL2 RLS NL DL STMS

C=Compactor Service Loader and dozer

Loading and dozing

Loaders, Bulldozers

Cut-resistance, Wear-resistance Stability

C-1 C-2

Smooth Grooved

Mobile Crane Service (High-Speed) Mobile Crane Service

Compacting Tire-rollers

Mobile crane (High-speed)

Oil-resistance, Cut-resistance, Wear-resistance

VHB VEL VCH VCHD VCHR VCHS VELS VRLS VSDL VSMS

Industrial Service

RL RLS ELS2 STMS YS2

Design Tread-Depth Heat-resistance, Wear-resistance, Traction

High-speed Travelling

VGT VHB VHS VSW

Industrial Service

LHDs

Compactor

RR AL2

150%

100%

250%

All-Terrain Cranes

Industrial

Uneven wear, Wear-resistance, Stability

Handling & Towing Handling & Towing Equipments

Regular Tread

Deep Tread

Extra Deep Tread

E-2/E-3 L-2/L-3 G-2/G-3

E-4 L-4 G-4

L-5/L-5S

GENERAL INFORMATION 5

4. Tire Markings (ORR)

4.2 Type of Tire Structures Classified by Service and Designated by Bridgestone

1 6

Each Bridgestone tire has a Bridgestone code number on the tire sidewall according to its specifications.

1 Brand Name 2 Bridgestone’s Specifications Code 3 Pattern Name 4 Serial Number

OFF

R OA D

ROA D

TYPE 2-A

E S I S TA N T CUT R

For Earthmover service

For Loader and Dozer service

THE

ROA D

For Industrial service

OFF

THE

For Grader service

ROA D

AND CRANE USE WHEEL

For Mobile Crane Service

Service Service

BS No. BS Code Code No.

Structure Structure

Earthmover Service (E)

1A 2A 3A

Standard Cut-resistant Heat-resistant

Grader Service (G)

1A 2A

Standard Cut-resistant

Loader & Dozer Service (D)

2A 2V* 2Z*

Cut-resistant Special cut-resistant (Type“V”) Special cut-resistant (Type“Z”)

Logging Service (S)

**Standard

*Tire Aspect Ratio

27.00 R 49 Star Rating Rim Diameter (inches) Radial Structure Section Width (inches)

SH = 0.95* SW

33.25 R 35

Radial Structure Section Width (inches)

SH = 0.80* SW

Super Wide Base 40 / 65 - 39 30PR Ply Rating

Rim Diameter (inches) Radial Structure Aspect Ratio 95 Series Section Width (mm) Speed Symbol Load Index

SH = 0.65* SW SH, SW : See Page 3

170 E 385 / 95 R 24

A: Standard V: Cut-resistant type “V” Structure: (Steel Breaker) Z: Cut-resistant type “Z” (Side Steel Breaker) Characteristics:

Rim Diameter (inches) Aspect Ratio 65 Series Section Width (inches)

NOTES: *Bias Tire Only **2V tires are standard for log skidder service since the possibility of the cutting is high in log skidder operations.

Steel Breaker Tire

Star Rating Rim Diameter (inches)

THE

GRADER

TYPE 2-A

4.1 Type of Tire Size Designation

Wide Base

OFF

Tire Structures Classified by Type of Service and Bridgestone’s Designations

Regular

R OA D

& DOZER

E S I S TA N T CUT R

IAL SERVICE INDUSTR

DOT code is necessary for USA public road.

THE

TYPE 2-A

5 Tire Size, Star Rating, Tubeless or Tube Type 6 DOT Code

OFF

L OA D E R

E S I S TA N T CUT R

OFF

THE

E A R T H M OV I N G

Type of Service:

Type V

Type Z

Steel breaker construction

Side steel breaker construction

1: Standard 2: Cut-resistant 3: Heat-resistant E: Earthmover G: Grader D: Loader & Dozer S: Logging

Steel Breaker Bias Tire Steel Breaker Off-the-Road tires feature breaker material which is changed from nylon to steel in order to resist cutting and cut bursting. Bridgestone Steel Breaker Off-the-Road tires are widely used on loaders at mining and quarry sites, loaders and shuttle trucks in underground mines, and also on log loaders.

Side Steel Breaker Bias Tire In this tire the steel breaker extends to the sidewall of the tire to protect it against damage. The construction is similar to that described above.

GENERAL INFORMATION 7

4.3 Load Index

4.4 Speed Symbol

The LOAD INDEX is an international numerical code for the maximum load a tire can carry at the speed indicated by its speed symbol under service conditions specified by Bridgestone.

The SPEED SYMBOL indicates the speed at which the tire can carry a load corresponding to its load index under service conditions specified by Bridgestone.

0 1 2 3 4 5 6 7 8 9

45 46.2 47.5 48.7 50 51.5 53 54.5 56 58

50 51 52 53 54 55 56 57 58 59

190 195 200 206 212 218 224 230 236 243

100 101 102 103 104 105 106 107 108 109

800 825 850 875 900 925 950 975 1 000 1 030

150 151 152 153 154 155 156 157 158 159

3 350 3 450 3 550 3 650 3 750 3 875 4 000 4 125 4 250 4 375

200 201 202 203 204 205 206 207 208 209

14 000 14 500 15 000 15 500 16 000 16 500 17 000 17 500 18 000 18 500

250 251 252 253 254 255 256 257 258 259

60 000 61 500 63 000 65 000 67 000 69 000 71 000 73 000 75 000 77 500

10 11 12 13 14 15 16 17 18 19

60 61.5 63 65 67 69 71 73 75 77.5

60 61 62 63 64 65 66 67 68 69

250 257 265 272 280 290 300 307 315 325

110 111 112 113 114 115 116 117 118 119

1 060 1 090 1 120 1 150 1 180 1 215 1 250 1 285 1 320 1 360

160 161 162 163 164 165 166 167 168 169

4 500 4 625 4 750 4 875 5 000 5 150 5 300 5 450 5 600 5 800

210 211 212 213 214 215 216 217 218 219

19 000 19 500 20 000 20 600 21 200 21 800 22 400 23 000 23 600 24 300

260 261 262 263 264 265 266 267 268 269

80 000 82 500 85 000 87 500 90 000 92 500 95 000 97 500 100 000 103 000

20 21 22 23 24 25 26 27 28 29

80 82.5 85 87.5 90 92.5 95 97 100 103

70 71 72 73 74 75 76 77 78 79

335 345 355 365 375 387 400 412 425 437

120 121 122 123 124 125 126 127 128 129

1 400 1 450 1 500 1 550 1 600 1 650 1 700 1 750 1 800 1 850

170 171 172 173 174 175 176 177 178 179

6 000 6 150 6 300 6 500 6 700 6 900 7 100 7 300 7 500 7 750

220 221 222 223 224 225 226 227 228 229

25 000 25 750 26 500 27 250 28 000 29 000 30 000 30 750 31 500 32 500

270 271 272 273 274 275 276 277 278 279

106 000 109 000 112 000 115 000 118 000 121 000 125 000 128 000 132 500 136 000

30 31 32 33 34 35 36 37 38 39

106 109 112 115 118 121 125 128 132 136

80 81 82 83 84 85 86 87 88 89

450 462 475 487 500 515 530 545 560 580

130 131 132 133 134 135 136 137 138 139

1 900 1 950 2 000 2 060 2 120 2 180 2 240 2 300 2 360 2 430

180 181 182 183 184 185 186 187 188 189

8 000 8 250 8 500 8 750 9 000 9 250 9 500 9 750 10 000 10 300

230 231 232 233 234 235 236 237 238 239

33 500 34 500 35 500 36 500 37 500 38 750 40 000 41 250 42 500 43 750

40 41 42 43 44 45 46 47 48 49

140 145 150 155 160 165 170 175 180 185

90 91 92 93 94 95 96 97 98 99

600 615 630 650 670 690 710 730 750 775

140 141 142 143 144 145 146 147 148 149

2 500 2 575 2 650 2 725 2 800 2 900 3 000 3 075 3 150 3 250

190 191 192 193 194 195 196 197 198 199

10 600 10 900 11 200 11 500 11 800 12 150 12 500 12 850 13 200 13 600

240 241 242 243 244 245 246 247 248 249

45 000 46 250 47 500 48 750 50 000 51 500 53 000 54 500 56 000 58 000

Speed Symbol

Speed (km/h)

Speed Symbol

Speed (km/h)

A1 A2 A3 A4 A5 A6 A7 A8

5 10 15 20 25 30 35 40

B C D E F G

50 60 65 70 80 90

4.5 Conversion Table: Star Rating to Ply Rating Service

Tire Size

Earthmover

12.00R24 14.00R24 14.00R25 16.00R25 18.00R25 18.00R33 21.00R35 40.00R57 17.5R25 20.5R25 25/65R25 23.5R25 26.5R25 29.5R25 29.5R29 33.25R29 33.25R35 37.25R35 37.5R39 40.5/75R39

Star Rating 3 3 3 2 1 2 2 2 2 1 1 2 2 1 2 2 2 2 2 2 2 2 2

Corresponding Ply Rating up to 24 up to 32 up to 32 up to 36 up to 24 up to 36 up to 40 up to 44 up to 74 up to 16 up to 24 up to 28 up to 32 up to 24 up to 32 up to 32 up to 34 up to 40 up to 44 up to 44 up to 48 up to 52 up to 54

Service

Tire Size

Grader

14.00R24 16.00R24 17.5R25 15.5R25 17.5R25 20.5R25

Loader

23.5R25 26.5R25

29.5R25 29.5R29 35/65R33 45/65R45

Star Rating 1 1 1 1 1 1 2 1 2 1 2 1 2 1 1 1

Corresponding Ply Rating up to 16 up to 16 up to 16 up to 16 up to 16 up to 24 up to 28 up to 24 up to 32 up to 24 up to 36 up to 28 up to 34 up to 34 up to 36 up to 50

Note: Due to the practice of altering inflation pressure to improve flotation on sand, Bridgestone does not apply a star rating to tire size 21.00R25 VSJ.

GENERAL INFORMATION 9

4.6 Size Conversion Table

5. Ton-Kilometer-Per-Hour (TKPH)

Metric

Inch

385/95R24, 25 445/95R24, 25 445/80R25 505/95R25 525/80R25 750/65R25

14.00R24, 25 16.00R24, 25 17.5R25 18.00R25 20.5R25 30/65R25

5.1 Operating TKPH Earth-moving, mining and logging tires have become increasingly important with the development of large construction vehicles. The primary task of these heavy-duty tires is to haul heavy loads faster, over longer distances. This heavy hauling inevitably causes heat built-up in the tires. As tires have limited resistance to heat, deterioration of the tire may occur at an early stage of operation if used beyond the rated TKPH. Accordingly, it is necessary when selecting tires, to determine the amount of work which will keep the tire within a safe range to avoid over-heating when the vehicle is operated under given conditions. The amount of work done under the given conditions and within a safe range is shown as “Operating Ton-Kilometer-Per-Hour (Operating TKPH)” which can be determined by the following formula:

Formula for Calculation of Operating TKPH

4.7 Dual Specification Codes

Operating = TKPH

Some Bridgestone Off-The-Road Tires have dual specification codes which can be used for both services.

Construction

Size Designation 26.5R25 MS* VLT T DE2

Radial

Loader & Dozer Service + Earthmover Service

1 2

D2A E2A

26.5 – 25 20 VL2 T DE2 Bias

Bias

(AWSS)

AWSS [km/hour]

D2A G2A

(Empty)

Tire Load

+ (Loaded) 2

Round Trip Distance[km] × Number of Cycles per Shift Total Hours of Operation per Shift

17.5R25 1 VKT T EG2 Radial

E2A G2A

* Multiple Star Rating Bridgestone Radial Tires marked with “LOADER & DOZER (one star)” and “EARTHMOVER (two star)” have specified load capacity on each servicing condition. Strength of tire casing is designed to constrain inflation pressure used. <26.5R25 as an example> Star Rating

Loader

(one

Earthmover

(two

star) stars)

Inflation Pressure

Load (Load Index)

Speed (Speed Symbol)

5.00 bar

15,000 kgs (202) 11,500 kgs (190)

10 km/hour (A2) 50 km/hour (B)

5.25 bar

5.2 Tire TKPH Tire TKPH varies depending on the tire’s design (size, tread pattern and the type of compound). A High TKPH tire generates less heat than that of lower TKPH tire. However, the lower TKPH tire will have greater cut and wear resistance than the higher TKPH one.

Compound Characteristics better

Earthmover Service + Grader Service

Type of Service

Average Work Shift Speed

(MTL) Tire Load

MTL [metric tons] =

D2A E2A 17.5 – 25 12 FG T DG2

Loader & Dozer Service + Grader Service

Mean Tire-Load

Cut Resistant Standard

Cut Resistance

Combination

Heat Resistant

The TKPH method is applicable in the following situations. (1) One way distance: within 16 km (10 miles) a. When haul length exceeds 16 km one way, consult a Bridgestone Representative. b. If the round-trip distance is less than 5km (3miles), Tire TKPH better Heat Resistance figures can be increased by 12%. (2) Ambient temperature: 38˚C (100˚F) For ambient temperatures other than 38˚C (100˚F), the Tire TKPH rating should be revised based on the following formula. a. Radial Tire Revised TKPH rating = [1 + A × (38˚C–Max. Ambient Temperature ˚C)]* × Tire TKPH Below Above

Description on Tire Sidewall

27.00 (33.5) inches in Section Width: A =0.010 30.00 (37.25) inches in Section Width: A =0.009

b. Bias Tire Revised TKPH rating = [1 + A × (38˚C–Max. Ambient Temperature ˚C)]* × Tire TKPH Below Above

27.00 (33.5) inches in Section Width: A =0.006 30.00 (37.25) inches in Section Width: A =0.005 *Revising coefficient: The value is shown in the following table.

GENERAL INFORMATION 11

RADIAL TIRE Revising Coefficient Ambient Temperature ˚C ˚F 14 15 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50

57 59 61 64 68 72 75 79 82 86 90 93 97 100 104 108 111 115 118 122

Bias Tire Tire Section 27.00 and below 30.00 and over 1.144 1.138 1.132 1.120 1.108 1.096 1.084 1.072 1.060 1.048 1.036 1.024 1.012 1.000 0.988 0.976 0.964 0.952 0.940 0.928

Radial Tire Tire Section 27.00 and below 30.00 and over

1.120 1.115 1.110 1.100 1.090 1.080 1.070 1.060 1.050 1.040 1.030 1.020 1.010 1.000 0.990 0.980 0.970 0.960 0.950 0.940

1.240 1.230 1.220 1.200 1.180 1.160 1.140 1.120 1.100 1.080 1.060 1.040 1.020 1.000 0.980 0.960 0.940 0.920 0.900 0.880

1.216 1.207 1.198 1.180 1.162 1.144 1.126 1.108 1.090 1.072 1.054 1.036 1.018 1.000 0.982 0.964 0.946 0.928 0.910 0.892

1. Tread Designs ®Earthmover Service

V-STEEL ULTRA TRACTION (VUT)

V-STEEL K-TRACTION (VKT)

V-STEEL S-BLOCK (VSB)

For all ambient temperatures below 14˚C (57˚F), the same TKPH value as calculated at 14˚C (57˚F) should be used.

(3) Maximum speed: 50 km/h (30 mph) When maximum speed exceeds 50 km/h, please refer the followings; a. Radial Tire No revision is needed up to the speed of 65 km/h (40 mph). Over 65 km/h: Consult a Bridgestone Representative. b. Bias Tire When the maximum speed exceeds 50 km/h (30 mph) under loaded conditions, the following formula is used: Revised TKPH Rating =

50 km/h Max. speed

× Tire TKPH

Example: The TKPH Rating for 21.00-35, 36PR RLS E1A is 226; if the tire is to run at 60 km/h when loaded.

V-STEEL F-TRACTION (VFT)

V-STEEL H-SERVICE (VHS)

V-STEEL SNOW WEDGE (VSW)

50 × 226 =188 60

(4) To obtain the TKPH(TMPH) for type 2A-LS, multiply type 2A rating by 0.8. (5) The respective types of vehicles are subject to the following speed limitations.

Maximum Speed Type of Vehicle

Maximum Speed

Dump & Scraper

50 km/h (40 mph)

Grader

40 km/h (25 mph)

Loader & Dozer

10 km/h (5 mph)

5.3 Proper TKPH The average operating TKPH, calculated after several samples, should not exceed the tire TKPH rating. Exceeding the tire TKPH may result in serious tire damage or failure.

V-STEEL L-TRACTION (VLT)

Wide Base Regular V-STEEL M-TRACTION (VMT)

V-STEEL TRACTION-STABILITY (VTS)

RADIAL TIRE 13

V-STEEL E-LUG (VEL)

Wide Base Regular V-STEEL R-LUG (VRL)

V-STEEL ROCK FAST (VRF)

14.00R24~ 16.00R25

21.00R33~ 37.00R57

V-STEEL R-LUG S (VRLS)

V-STEEL ROCK E-PREMIUM (VREP)

V-STEEL ROCK DEEP PREMIUM (VRDP)

速Sand Service

L317

V-STEEL L-TRACTION S (VLTS)

V-STEEL N-TRACTION (VSNT)

V-STEEL M-TRACTION S (VMTS)

V-STEEL M-TRACTION PREMIUM (VMTP)

V-STEEL ROCK PREMIUM SERVICE (VRPS)

V-STEEL ROCK QUARRY PREMIUM (VRQP)

V-STEEL JAMAL (VSJ)

速Grader Service

V-STEEL Z-TRACTION S (VZTS)

V-STEEL Z-TRACTION PREMIUM (VZTP)

37.00R57 VELSL

18.00R25~ 21.00R35

40.00R57

31/90R49 46/90R57

V-STEEL E-LUG S (VELS)

V-STEEL U-TRACTION (VUT)

V-STEEL K-TRACTION (VKT)

V-STEEL SNOW WEDGE (VSW)

V-STEEL M-TRACTION S (VMTS)

RADIAL TIRE 15

速Loader & Dozer Service

速Mobile Crane Service (High-Speed)

V-STEEL U-TRACTION (VUT)

V-STEEL K-TRACTION (VKT)

V-STEEL SNOW WEDGE (VSW)

V-STEEL L-TRACTION (VLT)

V-STEEL M-TRACTION (VMT)

V-STEEL G-TRACTION (VGT)

V-STEEL H-BLOCK (VHB)

V-STEEL HIGHWAY SERVICE (VHS)

V-STEEL SNOW WEDGE (VSW)

速Industrial Service

V-STEEL J-TRACTION (VJT)

V-STEEL TRACTIONSTABILITY (VTS)

V-STEEL L-TRACTION S (VLTS)

V-STEEL SUPER-DEEP TRACTION (VSDT)

V-STEEL N-TRACTION (VSNT)

V-STEEL N-LUG (VSNL)

V-STEEL H-BLOCK (VHB)

V-STEEL E-LUG (VEL)

V-STEEL CONTAINER HANDLER (VCH)

V-STEEL CONTAINER HANDLER DEEP (VCHD)

V-STEEL CONTAINER HANDLER RIB (VCHR)

L5S

V-STEEL D-LUG (VSDL)

V-STEEL SMOOTH TREAD-MS (VSMS)

V-STEEL CONTAINER HANDLER STABILITY AND SAFETY (VCHS)

V-STEEL E-LUG S (VELS)

V-STEEL R-LUG S (VRLS)

V-STEEL D-LUG (VSDL)

V-STEEL SMOOTH TREAD-MS (VSMS)

RADIAL TIRE 17

2. Application ®Earthmover Service HEAT RESISTANT

CUT RESISTANT

VLT

VFT

TRACTION

VMTP VLTS

VSW

VKT VSNT

VMT

L317

VMTS

VSB

VZTS

ROCK

VZTP VRL VEL VELSL VHS

VRF

Size

Type Star Rating

VUT(E2) 335/80 R 20 365/80 R 20 405/70 R 20

T/L T/L T/L

36.00 R 51

Type Star Rating

20.5 R 25 23.5 R 25 T/T T/L T/L T/L T/L T/L T/L

3 1 2 2 2 2 2

T/T T/L

T/L

3 3

T/L T/L

MS MS

VLT(E3) 20.5 R 25 23.5 R 25 750/65(30/65) R 25 26.5 R 25 29.5 R 25 33.25 R 29 37.25 R 35 40.5/75 R 39

T/L T/L T/L T/L T/L T/L T/L T/L

MS MS MS MS MS 2 2 2

VTS(E3) VFT(E2) 18.00 R 33 24.00 R 49 27.00 R 49

875/65 R 29 T/L T/L T/L

2 2 2

T/T: Tube Type T/L: Tubeless Type MS: Multiple Star Rating

*VSW is especially designed for snow surface operations.

T/L

VMT(E3) 23.5 R 25 29.5 R 25 30.00 R 51 33.00 R 51 40.00 R 57

VRPS

Size

VRQP

Type Star Rating

VEL(E3)

* VSW(E2)

VSB(E2) 14.00 R 24 14.00 R 25

VRDP

VHS(E2)

VKT(E2) 14.00 R 24 17.5 R 25 18.00 R 25 25/65 R 25 29.5 R 25 29.5 R 29 37.5 R 39

Size

VELS/VRLS

VREP

T/L T/L T/L T/L T/L

2 2 2 2 2

18.00 R 25 18.00 R 33 21.00 R 35

T/L T/L T/L

2 2 2

T/L T/L T/L T/L T/L

2 2 2 2 2

VRF(E3) 53/80 R 63 59/80 R 63

T/L T/L

2 2

T/T T/T T/L T/L T/T

3 3 14 3 3

T/L T/L T/L T/L T/L T/L

MS MS 2 2 2 MS

VLTS(E4) 20.5 R 25 23.5 R 25 750/65(30/65) R 25 26.5 R 25 29.5 R 25 875/65 R 29

26.5 R 25 29.5 R 25 29.5 R 29 35/65 R 33

T/L T/L T/L T/L

MS MS MS MS

12.00 R 24 18.00 R 33 21.00 R 33 21.00 R 35 24.00 R 35 24.00 R 49 27.00 R 49 33.00 R 51

T/T T/L T/L T/L T/L T/L T/L

3 3 2 2 2 2 2

T/T T/L T/L T/L T/L T/L T/L T/L

3 2 2 2 2 2 2 2

T/L T/L

2 2

VZTS(E4) 37.00 R 57 40.00 R 57

Type Star Rating

46/90 R 57

T/L

VELSL(E4) 37.00 R 57

T/T: Tube Type T/L: Tubeless Type MS: Multiple Star Rating

18.00 R 25 18.00 R 33 21.00 R 35 31/90 R 49 40.00 R 57

24.00 R 35 24.00 R 49 27.00 R 49 30.00 R 51 33.00 R 51 36.00 R 51 37.00 R 57

Type Star Rating

27.00 R 49

T/L

T/L T/L T/L T/L T/L T/L

2 2 2 2 2 2

T/L T/L T/L T/L T/L T/L

2 2 2 2 2 2

T/L T/L

2 2

VRDP(E4) T/L

T/L T/L T/L T/L T/L

2 2 2 2 2

VRLS(E4) 14.00 R 24 14.00 R 25 16.00 R 25 21.00 R 33

Size

VREP(E4)

VELS(E4)

VMTS(E4) 14.00 R 24 14.00 R 25 16.00 R 25 18.00 R 25 18.00 R 33 24.00 R 35 27.00 R 49

Size

VZTP(E4)

VMTP(E4)

L317(E4) 11.00 R 20 12.00 R 20 11 R 22.5 12 R 22.5 12.00 R 24

Type Star Rating

VSNT(E4)

VRL(E3) 29.5 R 35 33.25 R 35 37.25 R 35 40.5/75 R 39 27.00 R 49

Size

T/T T/L T/L T/L T/T T/L T/L T/L T/L T/L T/L T/L

3 3 2 2 2 2 2 2 2 2 2 2

27.00 R 49 33.00 R 51 42/90 R 57 40.00 R 57 46/90 R 57 53/80 R 63 VRPS(E4) 33.00 R 51 40.00 R 57 46/90 R 57 50/90 R 57 53/80 R 63 59/80 R 63 VRQP(E4) 18.00 R 33 24.00 R 35

RADIAL TIRE 19

® Grader Service

® Loader & Dozer Service CUT RESISTANT

HEAT RESISTANT

VUT VSW VKT

VUT

CUT RESISTANT

VLT

TRACTION

HEAT RESISTANT

VSW VKT VJT VMT

VTS VLTS VSNT

VSDT

VSNL Size

Type Star Rating

VUT(G2) 13.00 R 24 TG 14.00 R 24 TG 15.5 R 25 17.5 R 25 20.5 R 25 23.5 R 25

T/L T/L T/L

1 1 1

T/L 1 3 T/L 1 T/L 1

VMTS(G4) 14.00 R 24 TG

335/80 R 365/80 R 405/70 R 15.5 R 17.5 R 20.5 R 23.5 R

T/L

14.00 R 15.5 R 17.5 R 20.5 R 23.5 R 26.5 R

T/L T/L T/L T/L T/L T/L T/L

1 2 1 1 1

24 TG 25 25 25 25 25

T/L T/L T/L T/L T/L T/L

1 1 1 1 1 1 2

24 TG 25 25 25 25

T/L T/L T/L T/L T/L

1 1 MS MS 1

25 25 25 25 25

T/L T/L T/L T/L T/L

MS MS MS MS MS

*VSW(L2) 14.00 R 17.5 R 20.5 R 23.5 R 600/65 R

*VSW is especially designed for snow surface operations.

T/T: Tube Type T/L: Tubeless Type TG: For Semi-Drop Center Rim

20.5 R 23.5 R 750/65(30/65) R 26.5 R 29.5 R

Type Star Rating

17.5 R 20.5 R 23.5 R 26.5 R 29.5 R

25 25 25 25 25

T/L T/L T/L T/L T/L

1 2 1 1 1 2 1

Size

17.5 R 20.5 R 23.5 R 26.5 R 29.5 R

25 25 25 25 25

T/L T/L T/L T/L T/L

1 2 1 1 2 1 2 1

550/65 R 650/65 R 750/65 R 775/65 R 875/65 R

25 25 25 29 29

T/L T/L T/L T/L T/L

1 1 1 1 MS

20.5 R 25 23.5 R 25 875/65 R 29

T/L T/L T/L

MS MS MS

23.5 R 26.5 R 29.5 R 29.5 R 35/65 R

VJT(L3)

VSMS Type Star Rating

25 25 25 29 33

T/L T/L T/L T/L T/L

1 2 1 2 1 2 1 2 1 2

15 15 15 20 25 25 25 25 25 25 29 33 39 45 51 57 57

T/T T/T T/L T/T T/L T/L T/L T/L T/L T/L T/L T/L T/L T/L T/L T/L T/L

2 2 2 2 1 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 1 2 2

20 20 24 24 25 25 25 29

T/T T/T T/T T/T T/L T/L T/L T/L

2 2 2 2 1 2 1 2 1 2 2

VSDL(L5)

VTS(L3)

VLTS(L4)

VSNT(L4) 26.5 R 29.5 R 29.5 R 35/65 R

25 25 29 33

T/L T/L T/L T/L

14.00 R 20 35/65 R 33 45/65 R 45

T/T T/L T/L

MS MS MS MS

2 2 2 2

VSNL(L4) T/T: Tube Type T/L: Tubeless Type MS: Multiple Star Rating TG: For Semi-Drop Center Rim

VSDL

VSDT(L5)

VMT(L3) 20 20 20 25 25 25 25

VLT(L3)

Size

VKT(L2)

* VSW(G2) 14.00 R 24 TG 16.00 R 24 TG 17.5 R 25

Type Star Rating

VUT(L2) T/L 1 T/L 1 T/L 1 2 T/L 1 T/L 1 T/L 1

VKT(G2) 14.00 R 24 TG 16.00 R 24 TG 17.5 R 25

Size

ROCK

VMTS

*VSW is especially designed for snow surface operations.

2 2 2

NEW NEW NEW

8.25 R 10.00 R 14.5 R 12.00 R 15.5 R 17.5 R 20.5 R 23.5 R 26.5 R 29.5 R 29.5 R 35/65 R 45/65 R 45/65 R 50/65 R 55.5/80 R 60/80 R

VSMS(L5S) 9.00 R 12.00 R 12.00 R 14.00 R 17.5 R 18.00 R 26.5 R 29.5 R

RADIAL TIRE 21

® Mobile Crane Service (High-Speed) ON ROAD

® Industrial Service OFF ROAD

VHB

VRLS 14.00 R 24 16.00 R 25 18.00 R 25

3 2 3

TRACTION

VGT

T/T T/L T/L

16.00 R 25

T/L

23.5 R 25 35/65 R 33

T/L T/L

2 2

18.00 R 25

T/L

16.00 R 25

T/L

VSDL VEL 18.00 R 25

T/L

VHB VSW Size

Type

VGT 24 R 21 170E 445/80 R 25 (17.5R25)

VHS Size

Type

VHS T/L T/L

VHB

Size

Type

VSMS VCH 12.00 R 20 12.00 R 24 14.00 R 24

* VSW

170E 385/95 R 24 (14.00R24)

T/T

170E 385/95 R 25 (14.00R25)

T/L

170E 385/95 R 25 (14.00R25)

T/L

177E 445/95 R 25 (16.00R25)

T/L

170E 385/95 R 24 (14.00R24)

T/T

170F 385/95 R 25 (14.00R25)

177E 445/95 R 25 (16.00R25)

T/L

177E 445/95 R 25 (16.00R25)

T/L

186E 505/95 R 25 (18.00R25)

T/L

174F 445/95 R 25 (16.00R25)

T/L

186E 505/95 R 25 (18.00R25)

T/L

176F 525/80 R 25 (20.5R25)

T/L

T/T T/T T/T

3 2 3

VCHR NEW

VCHD 16.00 R 25

T/L

® Sand Service

VCHS 12.00 R 12.00 R 14.00 R 14.00 R 18.00 R 18.00 R

20 24 24 24 TG 25 33

T/T T/T T/T T/L T/L T/L

3 3 3 3 3

VSJ(E7) 16.00 R 20 21.00 R 25

T/T T/L

*VSW is especially designed for snow surface operations.

VELS T/T: Tube Type T/L: Tubeless Type

18.00 R 33

T/L

T/T: Tube Type T/L: Tubeless Type TG: For Semi-Drop Center Rim

RADIAL TIRE 23

3. Technical Data LI/SS

Star Rating

TRA Code or Application

Spec

D2A

TKPH TMPH

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

OTD mm

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch

Pattern

Tire Load Limits at Various Cold Inflation Pressures

48.0

VSDL

D2A

905 35.6

287 11.3

416 16.4

330 13.0

48.0

7.50V

VSDL

14.5R15 Tubeless

VSDL

D2A

899 35.4

359 14.1

413 16.3

412 16.2

48.0

11.00/1.5

VSDL

20" 9.00R20

VSMS

L5S

D2A

1054 41.5

260 10.2

474 18.7

303 11.9

51.0

7.00T

20" VSMS

11.00R20

L317

188

129

1107 43.6

290 11.4

512 20.2

325 12.8

25.0

335 13.2

8.00V

L317

1146 45.1

308 12.1

523 20.6

346 13.6

25.0

384 15.1

8.50V

L317

208

142

VSDL

D2A

1168 46.0

320 12.6

538 21.2

359 14.1

57.0

VSMS

L5S

D2A

1173 46.2

312 12.3

540 21.3

351 13.8

57.0

VCH

Industrial Service

IDU

D2A

kPa psi

400 58

Loader 10 5

kg lbs kg lbs kg lbs

2 2200 2275 2350 2425 2500 2575 2650 2725 2800 2875 2950 3025 3100 4860 5020 5200 5360 5540 5700 5860 6000 6200 6350 6500 6650 6800 2 2875 2975 3075 3175 3275 3375 3475 3575 3650 3750 3850 3950 4025 6350 6550 6800 7000 7200 7450 7650 7850 8050 8250 8500 8700 8900 2 2425 2550 2650 2775 2875 2975 3100 3200 3300 3400 3500 5360 5620 5860 6100 6350 6600 6800 7050 7250 7500 7700

Loader 10 5 E/M E4 50 30 E4

kg lbs kg lbs kg lbs kg lbs

2 3075 3250 3350 3450 3550 3650 3750 3875 4000 4000 4125 4250 4375 6800 7150 7400 7600 7850 8050 8250 8550 8800 8800 9100 9350 9650 3 2810 2910 3010 3100 3200 3300 3390 3480 3570 3670 3760 6200 6420 6640 6830 7050 7280 7470 7670 7880 8080 8290 3 3110 3220 3330 3430 3540 3650 3750 3850 3950 4060 4160 6860 7100 7340 7560 7800 8050 8270 8490 8720 8940 9170 2 4375 4500 4625 4875 5000 5150 5300 5450 5600 5800 5800 6000 6150 9650 9900 10200 10700 11000 11400 11700 12000 12300 12800 12800 13200 13600

6.50T

L317

VSDL VSMS

Loader 10 5

VCH VCHS

IDU

425 62

450 65

475 69

500 73

2500 2600 2710 5510 5730 5970 2770 2880 2990 6110 6350 6590

See characteristics page 48

VCHS

176A5

14.00R20

VSNL

Industrial Service L4

16.00R20

VSJ

1196 47.1

360 14.2

550 21.7

414 16.3

34.0

136B 147A2

E2 L2

DE2

10.00WI

VSNL

VSJ

1036 40.8

319 12.6

463 18.2

357 14.1

19.0

Loader 10 5 Sand

kg lbs

kPa psi

11x20

VUT

141B 153A2

E2 L2

DE2

1087 42.8

347 13.7

483 19.0

389 15.3

21.0

11x20

VUT

405/70R20 Tubeless

VUT

143B 155A2

E2 L2

DE2

1092 43.0

398 15.7

485 19.1

446 17.6

20.0

13x20

VUT

For the TKPH(TMPH) Ratings, please refer to page 11.

575 83

600 87

625 91

650 94

675 98

700 102

725 105

750 109

775 112

800 115

825 120

2 5200 5400 5550 5750 5900 6100 6250 6450 6600 6800 6950 7100 7300 11400 11900 12300 12600 13000 13400 13800 14200 14600 15000 15300 15700 16100

See characteristics page 53

VUT

365/80R20 Tubeless

550 80

See characteristics page 49

See characteristics page 52

VUT

525 76

8.25R15

285 11.2

14.5R15 10.00R15

405 15.9

11.00R20 9.00R20

248 9.8

12.00R20

880 34.6

E/M 50 30 Loader 10 5 E/M 50 30 Loader 10 5 E/M 50 30 Loader 10 5

kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs

275 40

300 44

325 47

350 51

16.00R20 14.00R20

375 54

1800 1900 2000 2120 2240 4000 4200 4400 4700 5000

335/80R20

10.00R15

335/80R20 Tubeless

Size

15" VSDL

VSDL

12.00R20

Application Max.Speed km/h mph

2430 2575 2725 2900 3075 5350 5700 6000 6400 6800 2060 2180 2300 2430 2575 4500 4800 5100 5400 5700 2900 3075 3250 3450 3650 6400 6800 7150 7600 8000 2180 2300 2430 2575 2725 4800 5100 5400 5700 6000 3075 3250 3450 3650 3875 6800 7250 7600 8100 8550

365/80R20

15" 8.25R15

Pattern

405/70R20

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 25

24" 12.00R24

L317

TKPH TMPH

Mobile Crane Service

520

356

TBA

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

OTD mm

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch

See characteristics page 50

1078 42.4

270 10.6

TBA TBA

25.0

Pattern

21" VGT

TBA TBA

TBA

L317

188

129

1109 43.7

292 11.5

517 20.4

327 12.9

25.0

343 13.5

9.00

L317

177

121

1254 49.4

319 12.6

577 22.7

355 14.0

31.5

391 15.4

8.50V

VMTP

E2A

136

1256 49.4

319 12.6

577 22.7

355 14.0

31.5

391 15.4

VSMS

L5S

D2A

1275 50.2

312 12.3

573 22.6

364 14.3

57.0

VCH

Industrial Service

IDU

Industrial Service

IDU

G2A

22.5" L317

L317

Tire Load Limits at Various Cold Inflation Pressures

HighSpeed 11R22.5 14PR kPa psi E/M kg 50 30 lbs

TBA 450 475 65 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

675 98

700 102

725 105

750 109

775 112

800 115

815 118

3 2410 2510 2610 2700 2800 2890 2990 3080 3170 3260 3350 3440 3530 3620 3690 3760 5310 5530 5750 5950 6170 6370 6590 6790 6990 7190 7390 7580 7780 7980 8140 8290

VUT

kPa psi

450 65

3 3050 3180 3300 3430 3550 3670 3790 3900 4020 4140 4250 6720 7010 7280 7560 7830 8090 8360 8600 8860 9130 9370

E/M 50 30

kg lbs

VSMS

Loader 10 5 IDU

kg lbs

VCH VCHS

1290 50.8

357 14.1

585 23.0

380 15.0

25.0

E2A

106

1351 53.2

390 15.4

612 24.1

442 17.4

25.0

450 17.7

VSB

E2 Logging

E2A

179

123

1365 53.7

390 15.4

628 24.7

433 17.0

21.0

450 17.7

VHB

Industrial Service

8.00TG Grader 40 25

10.00W VKT VSB VMTS VRLS VSB

See characteristics page 48

VMTS

E2A E1A

91 119

62 82

1400 55.1

386 15.2

642 25.3

428 16.9

38.0

450 17.7

VRLS

E2A

1403 55.2

390 15.4

644 25.4

432 17.0

39.0

450 17.7

VSMS

L5S

D2A

1394 54.8

390 15.4

634 25.0

437 17.2

72.0

VCH

Industrial Service

IDU

Industrial Service

IDU

196A5

For the TKPH(TMPH) Ratings, please refer to page 11.

500 73

525 76

550 80

575 83

See characteristics page 48

600 87

625 91

650 94

675 98

700 102

725 105

750 109

775 112

800 115

825 120

2 4875 5150 5300 5450 5600 5800 6000 6150 6300 6500 6500 6700 6900 11000 11400 11700 12000 12300 12800 13200 13600 13900 14300 14300 14700 15200

See characteristics page 49

VKT

VCHS

475 69

See characteristics page 48

E/M 50 30

kPa psi

200 29

kg lbs

1 1850 2000 2180 2360 2500 2650 2800 3000 4080 4400 4800 5200 5520 5840 6150 6600

kPa psi

450 65

kg lbs

3 4000 4125 4375 4500 4625 4750 5000 5150 5300 5450 5600 5710 5830 5940 6050 8800 9100 9650 9900 10200 10500 11000 11400 11700 12000 12300 12500 12800 13100 13400

Logging Load Range

Size

See characteristics page 51

L317 VMTP

VUT

14.00R24

Application Max.Speed km/h mph

24"

VCHS

13.00R24 TG Tubeless

Spec

24R21

VGT

TRA Code or Application

12R22.5

Star Rating

12.00R24

12R22.5 Tubeless

LI/SS

10.00W

kg lbs

VSMS

VHB VCH VCHS

Loader 10 5 IDU

225 33

475 69

250 36

500 73

275 40

525 76

300 44

550 80

325 47

575 83

350 51

600 87

375 54

625 91

J (18PR)

13.00R24 TG

21" 24R21 Tubeless 22.5" 11R22.5 Tubeless

Pattern

650 94

675 98

700 102

725 105

750 109

775 112

800 115

L (20PR)

3700 3910 4110 4310 4500 4690 4870 5150 5300 5450 5600 8150 8620 9070 9500 9930 10340 10730 11400 11700 12000 12300

Maximum Speed = 88km/h (55mph)

14.00R24

Tire Size

2 kg 5950 6200 6450 6700 6950 7200 7450 7700 7950 8200 8450 8700 8950 9200 9500 lbs 13120 13700 14220 14800 15300 15900 16400 16980 17500 18080 19600 19180 19690 20680 20900

See characteristics page 49

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 27

G2 L2

G2A D2A

VUT

G2A

1354 53.3

373 14.7

611 24.1

420 16.5

25.5

VSW

1351 53.2

390 15.4

594 23.4

446 17.6

23.5

VMTS

VCHS

15.5R25 Tubeless

G2A

Industrial Service

IDU

1400 55.1 -

373 14.7

25.0

426 16.8 TBA TBA

TBA TBA

10.00VA

VKT VUT VSW VMTS VKT VSW

Application Max.Speed km/h mph

Tire Load Limits at Various Cold Inflation Pressures kPa psi

200 29

225 33

250 36

275 40

300 44

325 47

Grader 40 25

kg lbs

1 2240 2430 2650 2800 3000 3250 3350 3650 4940 5360 5840 6150 6600 7150 7400 8050

Loader 10 5

kg lbs

170E

Mobile Crane Service

VHS

170E

Mobile Crane Service

375 54

525 76

550 80

3 VSW=Consult a Bridgestone Representative.

8.00TG

38.0

VCHS

VHB

350 51

Size

1 6700 6900 14800 15200

IDU

See characteristics page 48

See characteristics page 49

VHB VHS

HighSpeed

See characteristics page 50

See characteristics page 51

VKT

G2A

1473 58.0

418 16.5

675 26.6

470 18.5

28.5

VSW

1485 58.5

417 16.4

680 26.8

467 18.4

22.5

VSB

E2 Logging

E2A

179

123

1365 53.7

390 15.4

628 24.7

433 17.0

21.0

450 17.7

VMTS

650 25.6

435 17.1

38.0

450 17.7

62 93 58

389 15.3

91 136 85

1406 55.4

VRLS

E2A E3A E2A

1403 55.2

389 15.3

650 25.6

435 17.1

39.0

450 17.7

10.00VA VKT VSW

Grader 40 25

kPa psi

200 29

225 33

250 36

275 40

300 44

325 47

350 51

375 54

kg lbs

1 2900 3150 3350 3650 3875 4125 4375 4625 6400 6950 7400 8050 8550 9100 9650 10200

kPa psi

450 65

25"

VHS

170E 170F

Mobile Crane Service

VSW

170E

Mobile Crane Service

10.00/1.5

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

675 98

700 102

725 105

750 109

775 112

800 115

E/M 50 kg 30 lbs Logging Load

3 4000 4125 4375 4500 4625 4750 5000 5150 5300 5450 5600 5710 5830 5940 6050 8800 9100 9650 9900 10200 10500 11000 11400 11700 12000 12300 12500 12800 13100 13400 J L Range (18PR) (20PR) kg lbs

3700 3910 4110 4310 4500 4690 4870 5150 5300 5450 5600 8150 8620 9070 9500 9930 10340 10730 11400 11700 12000 12300

14.00R25

VSB VMTS VRLS VSB

VHS VSW

Maximum Speed = 88km/h (55mph)

HighSpeed

See characteristics page 50

See characteristics page 51

VUT

2 1

G2, L2

DG2

1269 50.0

383 15.1

559 22.0

436 17.2

27.0

VKT

D2A

1275 50.2

392 15.4

570 22.4

445 17.5

23.5

VSDL

D2A

1329 52.3

392 15.4

606 23.9

443 17.4

64.0

For the TKPH(TMPH) Ratings, please refer to page 11.

370 14.6

Pattern

385/95R25 (14.00R25)

385/95R25 (14.00R25) Tubeless

DG2 L2

OTD

kPa psi

12.00/1.3 VUT VKT VSDL

VUT

Loader 10 5

Grader 40 25

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

1 2 kg 5000 5150 5450 5600 5800 6150 6300 6500 6700 6900 7100 lbs 11000 11400 12000 12300 12800 13600 13900 14300 14800 15200 15700

kPa psi

125 18

150 22

175 25

200 29

225 33

250 36

275 40

kg lbs

1 1550 1750 2000 2180 2360 2575 2800 3000 3420 3860 4400 4800 5200 5680 6150 6600

15.5R25

25" 14.00R25 Tubeless

196A5

TKPH TMPH

385/95R24 (14.00R24)

153A8 175A2

Star Rating

16.00R24 TG

VKT

LI/SS

14.00R24 TG

14.00R24 TG Tubeless

16.00R24 TG Tubeless

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch 8.00TG -

Spec

Pattern

385/95R24 (14.00R24)

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 1351 370 612 422 53.2 14.6 24.1 16.6

TRA Code or Application

Tire Size

300 44 For slope and ditching service, inflation pressures should be increased by 100kPa (15psi) with no increase in load rating. For extreme conditions, consult a Bridgestone Representative for additional recommended operating requirements.

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 29

TKPH TMPH

VMTS

E2A

123

VRLS

E2A E1A

112 146

77 100

VHB

Industrial Service

IDU

Industrial Service

IDU

Industrial Service

IDU

Industrial Service

IDU

1531 60.3

448 17.6

697 27.4

New

VCHR

VRLS

445/95R25 (16.00R25) Tubeless

VHB

177E

Mobile Crane Service

VHS

177E 174F

Mobile Crane Service

177E

Mobile Crane Service

E2 G2 L2 G2, L2

EG2 D2A DG2

95 -

65 -

VSW

17.5R25 Tubeless

VKT

VUT

VSW

153A8 176A2

VMT

VJT New

176A2 182A2

VSDL

VSMS

445/80R25 (17.5R25) Tubeless 18.00R25 Tubeless

VGT

45.0

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch 513 11.25/2.0 20.2

513 20.2

Application Max.Speed km/h mph

Tire Load Limits at Various Cold Inflation Pressures kPa psi

VMTS VRLS

E/M 50 30

VHB VCHD VCHR VRLS

IDU

450 65

475 69

500 73

525 76

550 80

575 83

625 91

650 94

675 98

700 102

See characteristics page 49

VHB VHS VSW

HighSpeed

See characteristics page 51

1339 52.7

440 17.3

600 23.6

490 19.3

27.0

1340 52.8

444 17.5

586 23.1

500 19.7

28.0

G2 L2

DG2

1340 52.8

440 17.3

597 23.5

480 18.9

27.0

2 1

D2A

1352 53.2

443 17.4

600 23.6

514 20.2

30.0

1 2

D2A

1352 53.2

443 17.4

604 23.8

510 20.1

30.0

2 1

D2A

1400 55.1

440 17.3

639 25.2

495 19.5

68.0

2 1

L5S

D2A

1374 54.1

440 17.3

623 24.5

487 19.2

68.5

Mobile Crane Service

14.00/1.5

VKT

E1A

239

164

1610 63.4

510 20.1

733 28.9

571 22.5

31.0

587 23.1

VEL

E2A

181

124

1605 63.2

506 19.9

729 28.7

580 22.8

34.0

587 23.1

Industrial Service

kPa psi

275 40

1 3350 3550 3750 4000 4125 7400 7850 8250 8800 9100

VKT

E/M 50 30

kg lbs

VUT VKT VSW VMT VJT VSDL VSMS

Loader 10 5

kg lbs

VUT VKT VSW

Grader 40 25

VGT

HighSpeed

See characteristics page 50

See characteristics page 48

600 87

Size

2 kg 5150 5450 5600 5800 6000 6300 6500 6700 6900 7100 7300 lbs 11400 12000 12300 12800 13200 13900 14300 14800 15200 15700 16100

See characteristics page 48

170E

Pattern

See characteristics page 50

For the TKPH(TMPH) Ratings, please refer to page 11.

510 20.1

OTD

300 44

325 47

350 51

375 54

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

1 2 6000 6150 6500 6700 7100 7300 7500 7750 8000 8250 8500 13200 13600 14300 14800 15700 16100 16500 17100 17600 18200 18700

17.5R25

VCHD

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 1535 450 696 507 60.4 17.7 27.4 20.0

16.00R25

Spec

445/95R25 (16.00R25)

TRA Code or Application

LI/SS

kPa psi

125 18

kg lbs

1 1850 2120 2360 2650 2900 3075 3350 3650 4080 4680 5200 5840 6400 6800 7400 8050

VKT VEL

E/M 50 30

VEL

IDU

175 25

200 29

225 33

250 36

275 40

See characteristics page 51

kPa psi

13.00/2.5

150 22

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

675 98

445/80R25 (17.5R25)

16.00R25 Tubeless

Star Rating

Pattern

700 102

2 kg 6700 7100 7300 7500 7750 8000 8250 8500 8750 9000 9250 lbs 14800 15700 16100 16500 17100 17600 18200 18700 19300 19800 20400

18.00R25

Tire Size

See characteristics page 49 1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 31

TKPH TMPH

VMTS

E2A

169

116

VELS

E2A E1A

144 179

99 123

1638 64.5

515 20.3

744 29.3

580 22.8

50.0

587 23.1

VSMS

2 1

L5S

D2A

1675 65.9

512 20.2

733 28.9

592 23.3

84.5

Industrial Service

IDU

Industrial Service

IDU

VHB

186E

Mobile Crane Service

VHS

186E

Mobile Crane Service

D2A

VSW

VUT

VLT

177B 186A2

VMT

DE2

Loader 10 5 IDU

500 73

525 76

550 80

575 83

1470 57.9

530 20.9

644 25.4

597 23.5

30.5

1470 57.9

530 20.9

640 25.2

603 23.7

30.5

G2, L2

DG2

1473 58.0

533 21.0

643 25.3

608 23.9

30.5

E3 L3

DE2

149 -

102 -

1495 58.9

533 21.0

676 26.6

586 23.1

40.0

D2A

1480 58.3

530 20.9

652 25.7

597 23.5

33.0

1480 58.3

530 20.9

652 25.7

597 23.5

33.0

VLTS

177B 186A2

E4 L4

DE2

126 -

86 -

1478 58.2

530 20.9

667 26.3

581 22.9

49.0

2 1

D2A

1552 61.1

531 20.9

704 27.7

583 23.0

78.0

Mobile Crane Service

308

211

17.00/2.0 VSW VLT VLTS

VUT

675 98

700 102

725 105

750 109

775 112

800 115

825 120

kg lbs

1 2 11200 11800 12150 12500 12850 13200 13600 14000 14500 15000 15000 15500 16000 24700 26000 26800 27600 28300 29100 30000 30900 32000 33100 33100 34200 35300

E/M 50 30

Grader 40 25

kPa psi

275 40

300 44

kg lbs

1 2 4375 4750 5000 5300 5600 5800 6150 6500 6700 6900 7300 9650 10500 11000 11700 12300 12800 13600 14300 14800 15200 16100

kPa psi

125 18

kg lbs

1 2430 2800 3150 3450 3875 4125 4375 4625 5360 6150 6950 7600 8550 9100 9650 10200

150 22

325 47

175 25

350 51

200 29

375 54

225 33

400 58

250 36

425 62

275 40

450 65

475 69

500 73

525 76

300 44

For slope and ditching service, inflation pressures should be increased by 100kPa (15psi) with no increase in load rating. For extreme conditions, consult a Bridgestone Representative for additional recommended operating requirements.

VUT VKT VSW VLT VMT VJT VLTS VSDL

Loader 10 5

VHS

HighSpeed

VSJ See characteristics page 52

650 94

HighSpeed

17.00AL/1.7( 1only)

See characteristics page 50

625 91

2 kg 6700 7100 7300 7500 7750 8000 8250 8500 8750 9000 9250 lbs 14800 15700 16100 16500 17100 17600 18200 18700 19300 19800 20400

kPa psi

D2A

600 87

See characteristics page 51

For the TKPH(TMPH) Ratings, please refer to page 11.

VSMS

475 69

See characteristics page 50

VSJ

E/M 50 30

VHB VHS

176F

VMTS VELS

450 65

Size

See characteristics page 49

186A2

VHS

kPa psi

VSMS VHB VCHS

VJT

VSDL

525/80R25 (20.5R25) Tubeless 21.00R25 Tubeless

E2, L2

Tire Load Limits at Various Cold Inflation Pressures

505/95R25 (18.00R25)

214A5

51.0

Application Max.Speed km/h mph

See characteristics page 48

VCHS

VKT

Pattern

20.5R25

20.5R25 Tubeless

OTD

18.00R25

Spec

VHB

505/95R25 (18.00R25) Tubeless

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch 587 13.00/2.5 23.1

TRA Code or Application

LI/SS

kg lbs

275 40

300 44

325 47

350 51

375 54

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

1 2 8000 8250 8750 9000 9500 9750 10000 10300 10900 11200 11500 17600 18200 19300 19800 20900 21500 22000 22700 24000 24700 25400

See characteristics page 51

Sand See characteristics page 53

525/80R25

18.00R25 Tubeless

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 1649 514 754 571 64.9 20.2 29.7 22.5

Star Rating

Pattern

21.00R25 (20.5R25)

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 33

Spec

VKT

D2A

VSW

E2, L2

DE2

1596 62.8

620 24.4

692 27.2

689 27.1

31.5

VUT

G2, L2

DG2

1599 63.0

620 24.4

702 27.6

688 27.1

33.5

E3 L3

DE2

190 -

130 -

1623 63.9

616 24.3

734 28.9

680 26.8

42.5

2 1

E3 L3

E2A D2A

190 -

130 -

1600 63.0

617 24.3

702 27.6

688 27.1

35.0

195A2 201A2

1 2

D2A

1602 63.1

616 24.3

696 27.4

695 27.4

35.0

VLTS

185B 195A2

E4 L4

DE2

161 -

110 -

1616 63.6

612 24.1

729 28.7

675 26.6

54.0

VSDT

201A2 195A2

2 1

D2A

1660 65.4

621 24.4

745 29.3

680 26.8

79.0

2 1

D2A

1672 65.8

608 23.9

755 29.7

677 26.7

87.0

IDU

E2A

162

111

1486 58.5

635 25.0

670 26.4

690 27.2

30.5

VLT

185B 195A2

TKPH TMPH

OTD mm

33.0

Pattern

VJT New

VSDL

VSW VLT VMT VLTS

Loader 10 5

20.00/2.0

VKT

E/M 50 30 Loader 10 5

550/65R25 Tubeless

VTS

D2A

1350 53.1

547 21.5

594 23.4

605 23.8

32.5

(14.00/1.5) 17.00/2.0

VTS

600/65R25 Tubeless

VSW

D2A

1424 56.0

606 23.9

TBA TBA

31.5

(17.00/1.7, 17.00/2.0)

VSW

650/65R25 Tubeless

VTS

750/65R25 (30/65R25) Tubeless

VLT

VLTS 26.5R25 Tubeless

190B

VKT

VLT

VMT

193B 202A2

See characteristics page 48

D2A

1502 59.1

642 25.3

660 26.0

710 28.0

37.0

19.50/2.5

VTS

E3 L3

DE2

225 -

154 -

1625 64.0

765 30.1

718 28.3

831 32.7

43.0

(22.00/3.0) 24.00/3.0

VLT VLTS

D2A

1607 63.3

745 29.3

701 27.6

833 32.8

41.0

E2A

195

134

D2A

765 30.1 677 26.7

713 28.1 756 29.8

832 32.8 772 30.4

55.0

2 1

1623 63.9 1732 68.2

E3 L3

DE2

220 -

151 -

1755 69.1

678 25.7

787 31.0

736 29.0

45.0

D2A

1735 68.3

684 26.9

754 29.7

766 30.2

38.0

2 1

39.0

325 47

350 51

375 54

400 58

425 62

450 65

kPa psi

125 18

150 22

175 25

200 29

225 33

250 36

275 40

kg lbs

1 3150 3550 4000 4500 4875 5300 5600 6000 6950 7850 8800 9900 10700 11700 12300 13200

VLT VTS

22.00/3.0

275 40

300 44

325 47

kg lbs

350 51

375 54

400 58

425 62

475 69

500 73

525 76

300 44

E/M 50 30 Loader 10 5

VLT

E/M 50 30

VKT VLT VMT

Loader 10 5

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

1 2 10300 10600 11200 11500 12150 12500 12850 13200 13600 14000 14500 22700 23400 24700 25400 26800 27600 28300 29100 30000 30900 32000

IDU

19.50/2.5

For the TKPH(TMPH) Ratings, please refer to page 11.

VUT VKT VSW VLT VMT VJT VLTS VSDT VSDL VSDL

VKT

VTS

Grader 40 25

300 44

1 2 kg 5600 6000 6500 6700 7100 7500 7750 8250 8500 9000 9250 lbs 12300 13200 14300 14800 15700 16500 17100 18200 18700 19800 20400

kPa psi

25/65R25 Tubeless

190B 202A2

E/M 50 30

275 40

Size

Industrial Service E2

187A2

Tire Load Limits at Various Cold Inflation Pressures kPa psi

VUT VMT

Application Max.Speed km/h mph

23.5R25

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch 19.50/2.5 -

TRA Code or Application

LI/SS

See characteristics page 49 kg 5600 6000 6300 lbs 12350 13200 13850 kg lbs kg lbs kg lbs kg 6900 7300 7750 lbs 15200 16100 17100 kg lbs

2 6700 7100 7450 7750 14800 15600 16350 17100 1 7500 7750 8250 8500 16500 17100 18200 18700 1 8750 9000 9500 9750 19300 19800 20900 21500 1 10000 10600 10900 11500 22000 23400 24000 25400 2 8250 8750 9250 9750 10300 10600 18200 19300 20400 21500 22700 23400 1 13200 13600 14500 15000 29100 30000 32000 33100

750/65R25 (30/65R25) 650/65R25 600/65R25 550/65R25 25/65R25

23.5R25 Tubeless

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 1602 612 690 686 63.1 24.1 27.2 27.0

Star Rating

Pattern

1 2 kg 7100 7500 8000 8500 9000 9500 9750 10300 10600 11200 11500 lbs 15700 16500 17600 18700 19800 20900 21500 22700 23400 24700 25400 kg lbs

1 2 12850 13200 14000 14500 15000 15500 16000 16500 17000 18000 18500 28300 29100 30900 32000 33100 34200 35300 36400 37500 39700 40800

26.5R25

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 35

E2A

186

127

1736 68.3

675 26.6

784 30.9

743 29.3

60.0

E4 L4

DE2

165 -

113 -

1779 70.0

685 27.0

799 31.5

740 29.1

57.5

209A2 202A2

2 2 1

D2A D2A

1775 69.9

697 27.4

790 31.1

778 30.6

88.0

2 1

D2A

1790 70.5

684 26.9

797 31.4

761 30.0

95.5

VSMS

2 1

L5S

D2A

1775 69.9

684 26.9

810 31.9

746 29.4

95.0

VKT

E2A E1A

310 376

212 258

1861 73.3

762 30.0

822 32.4

844 33.2

44.0

E3 L3

DE2

266 -

182 -

1885 74.2

762 30.0

840 33.1

830 32.7

48.0

266 354 -

182 242 -

1865 73.4

762 30.0

808 31.8

868 34.2

42.0

1865 73.4

762 30.0

810 31.9

878 34.6

42.0

200B 208A2

VMT

VJT

208A2 208A2

1 1

L3 L3

E2A E1A D2A D2A

VLTS

200B

E2A

225

154

1865 73.4

762 30.0

835 32.9

844 33.2

65.0

E4 L4

DE2

220 -

151 -

1905 75.0

768 30.2

849 33.4

835 32.9

60.0

VSNT

VSDT

216A2 208A2

2 2 1

D2A D2A

1903 74.9

779 30.7

845 33.3

869 34.2

96.0

25.00/3.5

VSDL

2 1

D2A

1925 75.8

766 30.2

855 33.7

846 33.3

104.0

VTS

D2A

1740 68.5

775 30.5

762 30.0

843 33.2

43.0

(24.00/3.5) 25.00/3.5 27.00/3.5 (28.00/3.5)

VTS

E3 L3

DE2

1865 73.4

850 33.5

804 31.7

982 38.7

47.5

E4 L4

DE2

TBA -

1868 74.0

858 33.8

TBA TBA

60.0

VKT

E2A E1A

330 401

226 275

1958 77.1

765 30.1

870 34.3

841 33.1

44.0

VSNT

E4 L4

DE2

232 -

159 -

2000 78.7

774 30.5

905 35.6

849 34.6

60.0

VLTS

203B 214A2

D2A

For the TKPH(TMPH) Ratings, please refer to page 11.

38.0

Tire Load Limits at Various Cold Inflation Pressures kPa psi

275 40

300 44

325 47

350 51

VLTS VSNT

E/M 50 30

VJT VSNT VSDT VSDL VSMS

Loader 10 5

VKT VLT VMT VLTS VSNT

E/M 50 30

VLT VMT VJT VSNT VSDT VSDL

Loader 10 5

kg lbs

Loader 10 5 E/M 50 30 Loader 10 5 E/M 50 30 Loader 10 5

kg lbs Ê Ê Ê Ê Ê kg 10000 10900 11500 12150 lbs 22000 24000 25400 26800 kg lbs kg 9250 9750 10300 10900 lbs 20400 21500 22700 24000 kg lbs

29" VTS

VTS VLTS VTS VLTS

25.00/3.5

Application Max.Speed km/h mph

VKT VSNT VSNT

375 54

400 58

425 62

450 65

475 69

500 73

525 76

550 80

Size 575 83

600 87

625 91

650 94

1 2 kg 7100 7500 8000 8500 9000 9500 9750 10300 10600 11200 11500 lbs 15700 16500 17600 18700 19800 20900 21500 22700 23400 24700 25400 kg lbs

1 2 12850 13200 14000 14500 15000 15500 16000 16500 17000 18000 18500 28300 29100 30900 32000 33100 34200 35300 36400 37500 39700 40800

26.5R25

Pattern

1 2 kg 8500 9250 9750 10300 10900 11500 11800 12500 12850 13600 14000 lbs 18700 20400 21500 22700 24000 25400 26000 27600 28300 30000 30900

1 2 15500 16000 17000 17500 18000 19000 19500 20000 20600 21200 22400 34200 35300 37500 38600 39700 41900 43000 44100 45400 46700 49400

29.5R25

OTD

1 17000 37500 2 15500 34200 1 18500 19500 20600 21200 40800 43000 45400 46700

15000 33100 Ê Ê 12850 13600 28300 30000

15500 34200 Ê 14000 30900

16500 36400 Ê 14500 32000

1 2 11500 12150 12500 13200 13600 14500 15000 25400 26800 27600 29100 30000 32000 33100 1 2 16500 17000 18000 18500 19500 20000 20600 21200 22400 23000 23600 36400 37500 39700 40800 43000 44100 45400 46700 49400 50700 52000

775/65R29

TKPH TMPH

VSDL

VLT

29.5R29 Tubeless

193B

VSDT

875/65R29 Tubeless

D2A

202A2 209A2

VSNT

29" 775/65R29 Tubeless

VJT

VLTS

29.5R25 Tubeless

1 2

Star Rating

New

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch 22.00/3.0 -

Spec

LI/SS

875/65R29

26.5R25 Tubeless

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 1737 682 754 766 68.4 26.9 29.7 30.2

TRA Code or Application

Pattern

29.5R29

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 37

33" 18.00R33 Tubeless

D2A

VSDL

2 1

D2A

2008 79.1

776 30.6

900 35.4

856 33.7

104.5

VSMS

L5S

D2A

2008 79.1

766 30.2

904 35.6

861 33.9

104.5

VLT

E2A

349

239

2076 81.7

864 34.0

906 35.7

943 37.1

54.0

27.00/3.5

VFT

822 32.4

567 22.3

30.5

587 23.1

13.00/2.5

225 180

500 19.7

328 263

1811 71.3

VEL

E3A E1A

1805 71.1

500 19.7

835 32.9

560 22.0

35.0

587 23.1

VMTS

E2A E1A

199 246

136 168

1862 73.3

515 20.3

849 33.4

576 22.7

51.0

587 23.1

VMTP

E2A E1A

185 229

127 157

1870 73.6

515 20.3

846 33.3

575 22.6

55.0

587 23.1

VELS

E2A E1A

170 211

116 145

1856 73.1

512 20.2

856 33.7

575 22.6

49.0

587 23.1

Industrial Service

E2ALS E2A

122 152

84 104

Industrial Service

IDU

VSDT

218A2 211A2

OTD mm

96.0

Pattern

Application Max.Speed km/h mph

Tire Load Limits at Various Cold Inflation Pressures kPa psi

VSDT VSDL VSMS

Loader 10 5

VLT

E/M 50 30

275 40

300 44

325 47

350 51

375 54

kg lbs

400 58

425 62

450 65

475 69

500 73

525 76

550 80

Size 575 83

600 87

625 91

650 94

1 2 16500 17000 18000 18500 19500 20000 20600 21200 22400 23000 23600 36400 37500 39700 40800 43000 44100 45400 46700 49400 50700 52000

2 kg 11200 12150 12850 13600 14000 15000 15500 16500 17000 17500 18500 lbs 24700 26800 28300 30000 30900 33100 34200 36400 37500 38600 40800

33"

VRQP

VCHS

21.00R33 Tubeless

TKPH TMPH

29.5R29

2 1

Star Rating

33.25R29

33.25R29 Tubeless

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch 25.00/3.5 -

Spec

LI/SS

219A5

See characteristics page 48

1890 74.4

515 20.3

876 34.5

575 22.6

64.5

587 23.1

kPa psi VFT VEL VMTS VMTP VELS VRQP

E/M 50 30

VCHS VELS

IDU

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

675 98

700 102

2 kg 7750 8000 8500 8750 9000 9250 9750 10000 10300 10600 10900 lbs 17100 17600 18700 19300 19800 20400 21500 22000 22700 23400 24000

18.00R33

29.5R29 Tubeless

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 1989 779 883 872 78.3 30.7 34.8 34.3

TRA Code or Application

Pattern

13.00/2.5 See characteristics page 49

See characteristics page 48

VMTP

E2A E1A

237 293

162 201

1998 78.7

578 22.8

909 35.8

650 25.6

61.0

701 27.6

VRLS

E2A

227

155

1978 77.9

578 22.8

899 35.4

650 25.6

54.0

701 27.6

VSNT

E4 L4

DE2

250 -

171 -

2075 81.7

904 35.6

936 36.9

976 38.4

62.5

VSNL

2 2

15.00/3.0

VMTP VRLS

E/M 50 30

2 kg 10000 10300 10900 11200 11500 11800 12500 12850 13200 13600 14000 lbs 22000 22700 24000 24700 25400 26000 27600 28300 29100 30000 30900

21.00R33

Tire Size

21.00R33

VSDT

224A2 217A2

2 1

VSNT

D2A D2A

2075 81.7

880 34.6

936 36.9

981 38.6

62.5

D2A

2075 81.7

890 35.0

914 36.0

990 39.0

96.0

For the TKPH(TMPH) Ratings, please refer to page 11.

kPa psi

28.00/3.5

VSNT VSNL VSDT

E/M 50 30 Loader 10 5

275 40

300 44

325 47

350 51

375 54

400 58

425 62

kg 10600 11500 12150 12850 13600 14000 15000 lbs 23400 25400 26800 28300 30000 30900 33100 kg 19500 20600 lbs 43000 45400

450 65

475 69

500 73

15500 16000 17000 34200 35300 37500 1 21200 22400 23000 46700 49400 50700

525 76

550 80

575 83

600 87

625 91

650 94

2 17500 38600 2 23600 25000 25750 26500 27250 28000 52000 55100 56800 58400 60000 61500

35/65R33

35/65R33 Tubeless

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 39

LI/SS

Star Rating

TRA Code or Application

Spec

D2A

TKPH TMPH

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

OTD mm

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch

Pattern

880 34.6

917 36.1

951 37.4

95.0

kPa psi

28.00/3.5

Industrial Service

IDU

E3A E2A E1A E3A E2A E1A

410 237 293 342 227 281

281 162 201 234 155 192

E3A E2A E1A E3A E2A E1A E3A E2ALS

489 314 388 453 314 388 453 207

335 215 266 310 215 266 310 142

E1A

380

260

VMTP

VELS

VMTS

VMTP

VRLS

VRQP

VRL

VSDL

1993 78.5

568 22.4

912 35.9

646 25.4

37.5

701 27.6

375 54

kg lbs

2048 80.6

577 22.7

922 36.3

655 25.8

61.0

701 27.6

2044 80.5

577 22.7

935 36.8

650 25.6

59.0

701 27.6

2175 85.6

660 26.0

980 38.6

734 28.9

59.0

795 31.3

2194 86.4

660 26.0

975 38.4

734 28.9

68.0

795 31.3

2175 85.6

660 26.0

980 38.6

734 28.9

59.0

795 31.3

2194 86.4

660 26.0

995 39.2

745 29.3

71.5

795 31.3

2120 83.5

768 30.2

932 36.7

844 33.2

39.5

kPa psi

15.00/3.0

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

1 2 19500 20600 21200 22400 23000 23600 25000 25750 26500 27250 28000 43000 45400 46700 49400 50700 52000 55100 56800 58400 60000 61500

17.00/3.5

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

675 98

700 102

VEL VMTP VELS

E/M 50 30

2 kg 10300 10600 11200 11500 11800 12150 12850 13200 13600 14000 14500 lbs 22700 23400 24700 25400 26000 26800 28300 29100 30000 30900 32000

VMTS VMTP VRLS VRQP

E/M 50 30

2 kg 13200 13600 14000 14500 15500 16000 16500 17000 17500 18000 18500 lbs 29100 30000 30900 32000 34200 35300 36400 37500 38600 39700 40800

kPa psi

25.00/3.5

VRL

E1A

472

323

2228 87.7

846 33.3

990 39.0

970 38.2

49.0

27.00/3.5

VRL

37.25R35 Tubeless

VLT

E2A E1A

417 569

286 390

2388 94.0

954 37.6

1054 41.5

1063 41.9

59.5

31.00/4.0

VLT VRL

VRL

E1A

563

386

2370 93.3

954 37.6

1045 41.1

1063 41.9

51.0

VKT

E1A

696

477

2524 99.4

982 38.7

1120 44.1

1080 42.5

51.0

32.00/4.5

VLT

E2A E1A

500 682

342 467

2609 102.6

1002 39.4

1157 45.6

1127 44.4

58.5

32.00/4.5

VRL

E1A

675

462

2588 101.9

1002 39.4

1147 45.2

1125 44.3

48.5

For the TKPH(TMPH) Ratings, please refer to page 11.

350 51

See characteristics page 49

33.25R35 Tubeless

40.5/75R39 Tubeless

325 47

See characteristics page 48

VRL

39" 37.5R39 Tubeless

300 44

24.00R35

VEL

Loader 10 5 IDU

275 40

35/65R33

2075 81.7

21.00R35

39" VKT

VLT VRL

E/M E3 50 30 E2 E3

275 40

300 44

325 47

350 51

375 54

E2 E3 E3

kg 10000 10600 11200 11800 12500 lbs 22000 23400 24700 26000 27600 kg 12150 12850 14000 14500 15500 lbs 26800 28300 30900 32000 34200 kg 14500 15500 16500 17500 18500 lbs 32000 34200 36400 38600 40800

E/M 50 30 E/M 50 30

kg 16000 17000 18000 lbs 35300 37500 39700 kg 18000 19000 20600 lbs 39700 41900 45400

400 58

425 62

450 65

475 69

500 73

525 76

2 13200 13600 14500 15000 15500 16000 29100 30000 32000 33100 34200 35300 2 16000 17000 17500 18500 19000 20000 35300 37500 38600 40800 41900 44100 2 19500 20600 21200 22400 23000 23600 43000 45400 46700 49400 50700 52000

2 19000 20000 21200 21800 23000 23600 25000 25750 41900 44100 46700 48100 50700 52000 55100 56800 2 21800 22400 23600 25000 25750 27250 28000 29000 48100 49400 52000 55100 56800 60000 61500 64000

29.5R35

33.25R35

29.5R35 Tubeless

Size

37.25R35

2 1

24.00R35 Tubeless

Tire Load Limits at Various Cold Inflation Pressures

35" VSDL

VSDL

21.00R35 Tubeless

Application Max.Speed km/h mph

37.5R39

35" 35/65R33 Tubeless

Pattern

40.5/75R39

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 41

TRA Code or Application

Spec

D2A

TKPH TMPH -

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 2580 1074 1116 1205 101.6 42.3 43.9 47.4

Recommended Minimum Dual Spacing Rim/Flange Height mm mm inch inch 116.0 32.00/4.5 36.00/4.5

OTD

Pattern

27.00R49 Tubeless

31/90R49 Tubeless

51" 30.00R51 Tubeless

D2A

2730 107.5

1123 44.2

1190 46.8

1275 50.2

75.0

VSDL

2 1

D2A

2730 107.5

1123 44.2

1188 46.8

1274 50.2

111.5

VFT

E1A

562

385

2486 97.9

656 25.8

1147 45.2

738 29.1

38.5

795 31.3

VMTP

E2A -

361 -

247 -

2547 100.3

656 25.8

1175 46.3

735 28.9

68.0

795 31.3

VRLS

1166 45.9

738 29.1

59.0

795 31.3

2646 104.2

750 29.5

1207 47.5

835 32.9

44.0

892 35.1

VRL

2645 104.1

750 29.5

1205 47.4

835 32.9

42.5

892 35.1

VMTS

2690 105.9

750 29.5

1230 48.4

835 32.9

64.0

892 35.1

VMTP

2708 106.6

750 29.5

1239 48.8

835 32.9

73.0

892 35.1

VRLS

2687 105.8

750 29.5

1228 48.3

835 32.9

66.5

892 35.1

VREP

2692 106.0

750 29.5

1231 48.4

835 32.9

66.5

892 35.1

VRDP

2711 106.7

750 29.5

1240 48.8

835 32.9

76.0

892 35.1

VELSF

234 288 337 382 551 441 516 333 411 481 301 373 436 284 351 411 313 386 452 284 351 411 292 362

656 25.8

341 421 492 557 804 644 753 486 600 702 440 544 636 415 513 600 457 564 660 415 513 600 427 528

2531 99.6

VFT

E2A E1A E3A E2A E3A E1A E3A E2A E1A E3A E2A E1A E3A E2A E1A E3A E2A E1A E3A E2A E1A E3A E2A E1A

2694 106.1

771 30.4

1228 48.3

862 33.9

66.5

VMT

1294 50.9

950 37.4

729 340 413 491

854 33.6

1065 496 603 717

2850 112.2

VRLS

E3A E2A E1A E3A

2911 114.6

854 33.6

1311 51.6

963 37.9

For the TKPH(TMPH) Ratings, please refer to page 11.

36.00/4.5

17.00/3.5

45" VSNL VSDL

49" VFT VMTP VRLS

425 62

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

Loader 10 5

kg lbs

Loader 10 5

1 2 kg 35500 37500 38750 40000 42500 43750 45000 46250 47500 50000 51500 lbs 78500 82500 85500 88000 93500 96500 99000 102000 104500 110000 113500

675 98

700 102

1 33500 34500 36500 37500 40000 74000 76000 80500 82500 88000

E/M 50 30

kg lbs

2 15500 16500 17000 17500 18500 19000 19500 20000 20600 21200 21800 34200 36480 37500 38600 40800 41900 43000 44100 45400 46700 48100

24.00R49

400 58

Size

19.50/4.0

VFT VRL VMTS VMTP VRLS VREP VRDP

E/M 50 30

kg lbs

2 19500 20000 20600 21800 22400 23000 23600 25000 25750 26500 27250 43000 44100 45400 48100 49400 50700 52000 55100 56800 58400 60000

956 37.6

19.50/4.0

VELSF

E/M 50 30

kg lbs

2 20600 21200 22400 23000 23600 25000 25750 26500 27250 27800 29000 45400 46700 49400 50700 52000 55100 56800 58400 60000 61500 64000

45.0

993 39.1

22.00/4.5

51" VMT VRLS

E/M 50 30

kg lbs

2 23600 25000 25750 26500 28000 29000 30000 30750 31500 32500 33500 52000 55100 56800 58400 61500 64000 66000 68000 69500 71500 74000

74.5

993 39.1

27.00R49

49" 24.00R49 Tubeless

VSNL

Tire Load Limits at Various Cold Inflation Pressures kPa psi

VSDL

45" 45/65R45 Tubeless

Application Max.Speed km/h mph

45/65R39

Star Rating

45/65R45

VSDL

LI/SS

31/90R49

45/65R39 Tubeless

Pattern

30.00R51

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 43

VRLS

VRDP

VRPS

VHS

VRLS

VSDL

VZTS

VELSL

VRLS

42/90R57 Tubeless

VRDP

40.00R57 Tubeless

VMT

VZTS

VELS

VRDP

VRPS

36.00R51 Tubeless

50/65R51 Tubeless

57" 37.00R57 Tubeless

1018 1209 591 700

697 828 405 479

E2A E1A E3A E2A E1A E3A E2A

558 679 807 558 679 807 558

382 465 553 382 465 553 382

E3A E2A E1A E3A D2A

1485 642 781 927 -

1017 440 535 635 -

E2A E1A E3A E3A E2A E1A E3A E2A E1A E3A E2A E1A E3A E2A E1A E3A E2A E1A E3A E2A E1A E3A E2A E1A E3A

694 845 1003 1148 694 845 1003 715 870 1033 1204 1463 1739 773 940 1117 773 940 1117 773 940 1117 773 940 1117

475 579 687 786 475 579 687 490 596 708 825 1002 1191 529 644 765 529 644 765 529 644 765 529 644 765

For the TKPH(TMPH) Ratings, please refer to page 11.

OTD mm

48.0

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch 1074 24.00/5.0 42.3

Pattern

Application Max.Speed km/h mph

Tire Load Limits at Various Cold Inflation Pressures kPa psi

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

675 98

Size 700 102

VMT VMTP VRLS VRDP VRPS

E/M 50 30

kg lbs

2 27250 29000 30000 30750 32500 33500 34500 35500 36500 37500 38750 60000 64000 66000 68000 71500 74000 76000 78500 80500 82500 85500

26.00/5.0

VHS VRLS

kg lbs

2 33500 35500 36500 37500 38750 40000 41250 42500 43750 45000 46250 74000 78500 80500 82500 85500 88000 91000 93500 96500 99000 102000

40.00/4.5

VSDL

Loader 10 5

87.5

1217 47.9

27.00/6.0

1190 46.9

77.0

1217 47.9

1535 60.4

1190 46.9

87.5

1217 47.9

1060 41.7

1539 60.6

1210 47.7

97.0

1323 52.1

3512 138.3

1108 43.6

1560 61.4

1264 49.8

64.0

1311 51.6

3585 141.1

1140 44.9

1606 63.2

1289 50.7

91.5

1311 51.6

3562 140.2

1127 44.4

1582 62.3

1291 50.8

91.5

1311 51.6

3575 140.7

1108 43.6

1591 62.6

1264 49.8

97.0

1311 51.6

3575 140.7

1108 43.6

1591 62.6

1264 49.8

97.0

1311 51.6

3063 120.6

932 36.7

1376 54.2

1052 41.4

89.5

1074 42.3

3036 119.5

932 36.7

1371 54.0

1051 41.4

78.5

1074 42.3

3061 120.5

932 36.7

1376 54.2

1051 41.4

87.0

1074 42.3

3061 120.5

932 36.7

1376 54.2

1051 41.4

87.0

1074 42.3

3108 122.4

1015 40.0

1390 54.7

1163 45.4

44.0

1184 46.6

3204 126.1

1015 40.0

1431 56.3

1153 45.4

86.5

1184 46.6

3070 120.9

1278 50.3

1347 53.0

1361 53.6

128.0

3422 134.7

1044 41.1

1541 60.7

1190 46.9

3388 133.4

1044 41.1

1524 60.0

3410 134.3

1044 41.1

3456 136.1

33.00R51

VMTP

E1A E3A E2A E1A

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 2988 932 1338 1052 117.6 36.7 52.7 41.4

2 kg 45000 47500 50000 51500 54500 56000 58000 60000 61500 63000 65000 lbs 99000 104500 110000 113500 120000 123000 127500 131500 135500 139000 143500

57" VZTS VELSL VRLS

E4 E/M E4 50 E4 30

kg lbs

2 37500 38750 40000 41250 43750 45000 46250 47500 48750 50000 51500 82500 85500 88000 91000 96500 99000 102000 104500 107500 110000 113500

27.00/6.0

VRDP

29.00/6.0

VMT VZTS VELS VRDP VRPS

E3 E4 E4 E4 E4

kg lbs kg lbs

2 38750 40000 41250 42500 45000 46250 47500 48750 50000 51500 53000 85500 88000 91000 96500 99000 102000 104500 107500 110000 113500 117000 2 42500 45000 46250 48750 50000 51500 53000 54500 56000 58000 60000 93500 99000 102000 107500 110000 113500 117000 120000 123500 128000 132500

36.00R51

TKPH TMPH

50/65R51

Spec

37.00R57

VMT

33.00R51 Tubeless

LI/SS

42/90R57

TRA Code or Application

Pattern

40.00R57

Star Rating

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 45

VRDP

VRPS

55.5/80R57 Tubeless

VSDL

50/90R57 Tubeless

VRPS

60/80R57 Tubeless

VSDL

63" 53/80R63 Tubeless

59/80R63 Tubeless

VRF

VRDP

VRPS

VRF

VRPS

TKPH TMPH

E2A E1A E3A E2A E1A E3A E2A E1A E3A D2A

766 927 1103 796 968 1150 796 968 1150 -

E2A E1A E3A D2A

E3A E2A E1A E3A E2A E1A E3A E1A E3A E1A E3A E2A E1A E3A E2A E1A E3A

For the TKPH(TMPH) Ratings, please refer to page 11.

884 1092 1278 -

1628 974 1150 1408 974 1150 1408 1784 2050 1686 1937 1228 1515 1773 1160 1431 1675

525 635 755 545 663 788 545 663 788 -

605 748 875 -

1115 667 788 964 667 788 964 1222 1404 1155 1327 841 1038 1214 794 980 1147

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 3585 1145 1591 1299 141.1 45.1 62.6 51.1

OTD mm

97.0

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch 1412 29.00/6.0 55.6 (32.00/6.0)

Pattern

550 80

575 83

600 87

625 91

650 94

82000 85750 89500 93250 97000 100500 104000 107750 111000 114750 118000 180500 189250 197500 205500 213500 221500 229500 237250 245000 252500 260000

E/M 50 30

kg lbs

2 67000 69000 71000 75000 77500 80000 82500 147500 152000 156500 165500 171000 176500 182000

kg lbs kg lbs

2 80000 82500 87500 90000 92500 95000 100000 176500 182000 193000 198500 204000 209500 220500 2 77000 79000 84000 86000 89000 91000 96000 169300 174600 185200 190500 195800 201050 211650

1145 45.1

1586 62.4

1299 51.1

97.0

1412 55.6

3740 147.2

1410 55.5

1634 64.3

1616 63.6

125.5

44.00/6.0

3840 151.2

1283 50.5

1702 67.0

1471 57.9

107.0

1562 61.5

32.00/6.0 34.00/6.0

VRPS

3952 155.6

1491 58.7

1738 68.4

1755 69.1

118

47.00/6.0

VSDL

3741 147.3

1311 51.6

1615 63.6

1524 60.0

64.0

1626 64.0

36.00/5.0

3828 150.7

1304 51.3

1657 65.2

1511 59.5

110.0

1626 64.0

3828 150.7

1304 51.3

1657 65.2

1511 59.5

110.0

1626 64.0

4022 158.3

1459 57.4

1710 67.3

1712 67.4

71.0

1780 70.0

525 76

kg lbs kg lbs kg lbs

3575 140.7

116.0

500 73

Loader 10 5 E/M 50 30 Loader 10 5

1412 55.6

1712 67.4

475 69

VSDL

97.0

1710 67.3

450 65

kg lbs

1299 51.1

1467 57.8

425 62

E/M 50 30

1586 62.4

4017 158.1

400 58

VZTP VRDP VRPS

1145 45.1

41.00/5.0

Tire Load Limits at Various Cold Inflation Pressures kPa psi

3575 140.7

44.00/5.0

Application Max.Speed km/h mph

63" VRF VRDP VRPS

VRF VRPS

675 98

Size 700 102

2 45000 47500 48750 51500 53000 54500 56000 58000 60000 61500 63000 99000 104500 107500 113500 117000 120000 123500 128000 132500 135500 139000

46/90R57

VZTP

Spec

82500 85000 90000 92500 95000 97500 100000 103000 106000 * About some exceptions, consult a 182000 187500 198000 203500 209000 214500 220500 227000 233500 bridgestone representative. 2 56000 58000 60000 63000 65000 67000 69000 71000 73000 75000 77500 123500 128000 132500 139000 143500 147500 152000 156500 161000 165500 171000

60/80R57 50/90R57 55.5/80R57

TRA Code or Application

LI/SS

53/80R63

46/90R57 Tubeless

Star Rating

Pattern

* 44.00/5.0 Rim

* 41.00/5.0 Rim

44.00/5.0

59/80R63

Tire Size

41.00/5.0

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

RADIAL TIRE 47

LI/SS

Industrial Service 20" 12.00R20 VCH

23.5R25 Tubeless

33" 18.00R33 Tubeless

35/65R33 Tubeless

Size

512 20.2

360 14.2

29.5

380 15.0

Industrial Service

1139 44.8

297 11.7

507 20.0

355 14.0

41.5

375 14.8

Industrial Service

1254 49.4

323 12.7

558 22.0

376 14.8

29.5

Industrial Service

1263 49.7

310 12.2

580 22.8

351 13.8

42.0

Industrial Service Industrial Service Industrial Service Industrial Service

1357 53.4 1393 54.8 1412 55.6

383 15.1 390 15.4 383 15.1

630 24.8 610 24.0 626 24.6

410 16.1 460 18.1 445 17.5

23.5

450 17.7 480 18.9 480 18.9

Industrial Service Industrial Service Industrial Service Industrial Service Industrial Service Industrial Service Industrial Service Industrial Service

1484 58.4 1500 59.1 1504 59.2 1531 60.3 1610 63.4 1609 63.3 1650 65.0 1681 66.2

440 17.3 435 17.1 435 17.1 448 17.6 515 20.3 507 20.0 504 19.8 512 20.2

690 27.2 668 25.8 674 26.5 713 28.1 733 28.9 727 28.6 707 27.8 730 28.7

475 18.7 500 19.8 500 19.7 488 17.6 565 22.2 571 22.5 596 23.5 592 23.3

22.5

VCH

VCHS

196A5

VCHS

196A5

VCHR VRLS

VHB

VEL

3 214A5

32.0 63.0

54.0

513 20.2 523 20.6

VCH VCHS

IDU

Load 1000 Wheel 145 Steering 1000 Wheel 145

24" VCH

IDU

VCHS

IDU

10.00W

VHB VCH VCHS

IDU

10.00VA

VCHS

IDU

11.25/2.0

25" VHB VRLS

IDU

8.50V

50.0 45.0 26.0 34.0 64.0

540 21.3 587 23.1 612 24.1 600 23.6 612 24.1

kPa psi

8.50V

13.00/2.5

722 28.4

19.50/2.5

VSDL

IDU

Industrial Service Industrial Service Industrial Service

1856 73.1 1860 73.2 2075 81.7

508 20.0 512 20.2 880 34.6

803 31.6 800 31.5 900 35.4

585 23.0 604 23.8 986 38.8

68.5

600 23.6 634 25.0 -

13.00/2.5

33" VCHS VELS

IDU

28.00/3.5

VSDL

IDU

VSDL

49.0 95.0

8875 19570 6570 14480

960 139 960 139 1000 145 1000 145 1000 145 1000 145

kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs

12420 27385 9935 21910 9750 21500 7500 16500 18000 39690 14400 31750

11040 24345 8830 19475 9750 21500 7500 16500 16000 35280 12800 28225

10005 22060 8005 17650 9750 21500 7500 16500 14500 31970 11600 25580

9315 20540 7450 16430 9750 21500 7500 16500 13500 29765 10800 23815

8970 19780 7175 15825 9750 21500 7500 16500 13000 28665 10400 22930

8765 19320 7010 15455 9750 21500 7500 16500 12700 28005 10160 22400

8625 19020 6900 15215 9750 21500 7500 16500 12500 27560 10000 22050

9375 20670 6935 15200 12400 27340 9920 21875

9375 20670 6415 15200

Load 1000 Wheel 145 Steering 1000 Wheel 145

kg lbs kg lbs

18000 39690 14400 31750

16000 35280 12800 28225

14500 31970 11600 25580

13500 29765 10800 23815

13000 28665 10400 22930

12700 28005 10160 22400

12500 27560 10000 22050

12400 27340 9920 21875

Load Wheel Steering Wheel

960 139 960 139 1000 145

kg lbs kg lbs kg lbs

21870 48225 17495 38580 18200 40140

19440 42865 15550 34290 18200 40140

17615 38845 14095 31075 18200 40140

16400 36165 13120 28935 18200 40140

15795 34825 12635 27860 14000 30900

15430 34025 12345 27220 14000 30900

15185 33490 12150 26790 14000 30900

15065 33220 12050 26575 12460 12460 27475 27475

kg lbs kg lbs

30600 67475 24480 53980

27200 59975 21760 47980

24650 54355 19720 43480

22950 50605 18360 40485

22100 48730 17680 38985

21590 47605 17270 38085

21250 46855 17000 37485

21080 46480 16865 37185

kg lbs kg lbs kg lbs kg lbs

28800 63505 23040 50805 26100 57550 20880 46040

25600 56450 20480 45160 23200 51155 18560 40925

23200 51155 18560 40925 21025 46360 16820 37090

21600 47630 17280 38100 19575 43160 15660 34530

20800 45865 16640 36690 18850 41565 15080 33250

20320 44805 16255 35845 18415 40605 14730 32485

20000 44100 16000 35280 18125 39965 14500 31970

19840 43745 15870 34995 17980 39645 14385 31715

kg 35100 31200 28275 lbs 77395 68795 62345 kg 28080 24960 22620 lbs 61915 55035 49875 kg 50400 44800 40600 lbs 111130 98785 89525 kg 40320 35840 32480 lbs 88905 79025 71620

26325 58045 21060 46435 37800 83350 30240 66680

25350 55895 20280 44715 36400 80260 29120 64210

24765 54605 19810 43685 35560 78410 28450 62725

24375 53745 19500 42995 35000 77175 28000 61740

24180 53315 19345 42655

Load Wheel Steering Wheel Load Wheel Steering Wheel 3 Load Wheel Steering Wheel

960 139 960 139 690 100 690 100

87.0

VELS

8875 19570 6570 14480

687 27.0

219A5

9230 20350 7100 15620

IDU

755 29.7

35 22

9230 20350 7100 15620

VSMS

608 23.9

30 19

9230 20350 7100 15620

Load 1000 Wheel 145 Steering 1000 Wheel 145

1672 65.8

25 15

9230 20350 7100 15620

Industrial Service

20 12

9230 20350 7100 15620

IDU

15 9

9230 20350 7100 15620

VHB VEL VCHS

VSDL

84.5

10 5

9230 20350 7100 15620

IDU

5 3

kg lbs kg lbs

VCHD VCHR

VSMS

km/h 0 Creep mph Static Creep

Load Wheel Steering Wheel 2 Load Wheel Steering Wheel 3

Load 1000 Wheel 145 Steering 1000 Wheel 145 2 Load 780 Wheel 113 Steering 780 Wheel 113

12.00R20

315 12.4

VCHS

Tire Load Limits at Various Speeds

*Compliant with the ETRTO standard of industrial tires

12.00R24

1140 44.9

VHB

VCHS

Inflation Pressure

14.00R24

Industrial Service

VCHD

18.00R25 Tubeless

Star Rating

14.00R24 TG

176A5

VHB

New

Pattern Application

*Compliant with the ETRTO standard of industrial tires (For straddle carrier use only)

16.00R25

25" 16.00R25 Tubeless

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch

VCHS

14.00R24 TG Tubeless

OTD

Industrial Service 20"

VCH

14.00R24

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

18.00R25

24" 12.00R24

TRA Code or Application

23.5R25

VCHS

Star Rating

18.00R33

Pattern

35/65R33

Tire Size

3) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi). 4) For Speeds exceeding 30km/h (18mph), consult a Bridgestone Representative. 5) For tire sizes and star ratings other than listed above, consult a Bridgestone Representative.

RADIAL TIRE 49

LI/SS

Mobile Crane Service (High-Speed) 21" 24R21 VGT Tubeless

TRA Code or Application

Mobile Crane Service

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

1380 54.3

601 23.7

623 24.5

647 25.5

OTD mm

24.5

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch

18.00/1.5

Pattern

Application

Inflation

Mobile Crane Service (High-Speed) 21" kPa psi VGT High-Speed 580 85

445/80R25 (17.5R25) Tubeless 505/95R25 (18.00R25) Tubeless

525/80R25 (20.5R25) Tubeless

km/h mph

88 55

kg lbs

7120 15700

Mobile Crane Service

1357 53.4

383 15.1

630 24.8

410 16.1

23.5

450 17.7

VHS

170E

Mobile Crane Service

1356 53.4

384 15.1

626 24.6

422 16.6

23.0

450 17.7

VHS

170E 170F

Mobile Crane Service

1356 53.4

384 15.1

626 24.6

422 16.6

23.0

450 17.7

VSW

170E

Mobile Crane Service

1355 53.3

394 15.5

631 24.8

427 16.8

23.5

450 17.7

VHB

177E

Mobile Crane Service

1484 58.4

440 17.3

690 27.2

475 18.7

22.5

513 20.2

VHS

177E 174F

Mobile Crane Service

1484 58.4

435 17.1

684 26.9

480 18.9

25.5

513 20.2

VSW

177E

Mobile Crane Service

1484 58.4

435 17.1

695 27.4

476 18.7

23.0

513 20.2

VGT

170E

Mobile Crane Service

1339 52.7

440 17.3

610 24.0

485 19.1

24.0

VHB

186E

Mobile Crane Service

1590 62.6

510 20.1

778 30.6

565 22.2

26.0

587 23.1

VHS

186E

Mobile Crane Service

1593 62.7

505 19.9

727 28.6

565 22.2

26.0

587 23.1

VHS

176F

Mobile Crane Service

1480 58.3

533 21.0

677 26.7

578 22.8

31.0

kPa psi

10.00W VHB VHS

km/h 0 Creep mph Static Creep

5 3

10 5

15 9

20 12

30 19

40 25

50 31

60 37

70 43

80 50

90 56

100 62

High-Speed

900 131

kg lbs

17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600 39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950

High-Speed

900 131

kg lbs

17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600 39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950

High-Speed

900 131

kg lbs

15000 33070

VHB VHS VSW (177E)

High-Speed

900 131

kg lbs

21500 17500 15500 13400 12000 10800 9500 9050 8600 8100 7300 6000 5100 4375 47500 38500 34200 29600 26400 23800 20900 20000 19000 18000 16100 13200 11300 9650

VHS (174F)

High-Speed

900 131

kg lbs

16750 36930

14.00/1.5

VGT

High-Speed

700 102

kg lbs

17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600 39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950

13.00/2.5

VHB VHS

High-Speed

900 131

kg lbs

28000 22700 20200 17500 15600 14100 12300 11800 11200 10600 9500 7800 6650 5700 61800 50200 44500 38500 34300 31000 27200 26000 24700 23400 20900 17200 14700 12600

17.00/2.0

VHS

High-Speed

700 102

kg lbs

22900 18600 16500 14300 12700 11500 10100 9600 9150 8700 7750 6350 5400 4650 50400 40900 36300 31400 28000 25300 22200 21200 20200 19100 17100 14000 12000 10200

10.00/1.5

11.25/2.0

25" VHS VSW (170E) VHS (170F)

12600 10800 9900 9000 7500 6900 6720 6600 6300 6000 5640 5100 27780 23810 21830 19850 16540 15220 14820 14560 13890 13230 12440 11250

14070 12060 11055 10050 8375 7705 7505 7370 7035 6700 6300 5695 31020 26590 24380 22160 18470 16990 16550 16250 15510 14780 13890 12560

385/95R25 (14.00R25)

170E

385/95R24 (14.00R24)

24" VHB

445/95R25 (16.00R25)

445/95R25 (16.00R25) Tubeless

*Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi).

445/80R25

25" 385/95R25 (14.00R25) Tubeless

Size

505/95R25 (18.00R25) (17.5R25)

24" 385/95R24 (14.00R24)

Tire Load Limits at Various Speeds

Pressure

24R21

Pattern

525/80R25 (20.5R25)

Tire Size

RADIAL TIRE 51

25" 21.00R25 Tubeless

LI/SS

Star Rating

TRA Code or Application

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

OTD mm

Recommended Minimum Dual Spacing Rim/Flange Height mm inch inch

Pattern Application

Ply

Sand Service 20" VSJ

VSJ

1315 51.8

1728 68.0

414 16.3

584 23.0

590 23.2

784 30.9

475 18.7

649 25.6

18.5

22.5

520 20.5

685 27.0

Max.

kg lbs VSJ

Sand

25" VSJ

Sand

Size

*It is Recommended that 90% of the below indicated loads per tire is to be applied when used on a dual axle.

10.00W

15.00/3.0

Tire Cold Inflation Pressures at Various Load Limits

Rating Speed

28PR 65km/h 40mph 50km/h 30mph 16km/h 10mph

65km/h 40mph 50km/h 30mph 16km/h 10mph

kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi

4250 4500 4750 5000 5250 5500 6000 7000 8000 8500 9000 9500 9370 9920 10470 11020 11570 12130 13230 15430 17640 18740 19840 20940 490 71 390 57 280 41

540 78 420 61 300 44

580 84 450 65 320 47

630 91 490 71 350 51

680 98

720 105

16.00R20

Sand Service 20" 16.00R20

Pattern

330 48 260 38 200 28

410 60 320 47 230 34

490 71 390 57 280 41

540 78 420 61 300 44

590 85

630 92

21.00R25

Tire Size

RADIAL TIRE 53

BIAS TIRE 1. Tread Designs ® Earthmover Service

W-LUG (WL)

R-LUG (RL)

® Sand Service

V-LUG2 (VL2)

R-LUG S (RLS)

E-LUG S2 (ELS2)

® Grader Service

RIB GRADER (RG)

G-LUG (GL)

R-LUG (RL)

SMOOTH TREAD-MS (STMS)

ALLIGATOR2 (AL2)

® Industrial Service

G-LUG (GL)

D-LUG (DL)

ROAD ROLLER (RR)

FAST GRIP (FG)

® Loader & Dozer Service

N-LUG (NL)

L5S

® Compactor Service

SAND CLIPPER-2 (SCP2)

R-LUG S (RLS)

FAST GRIP (FG)

R-LUG (RL)

V-LUG2 (VL2)

R-LUG (RL)

R-LUG S (RLS)

E-LUG S2 (ELS2)

SMOOTH TREAD-MS (STMS)

YARD SERVICE-2 (YS2)

BIAS TIRE 55

2. Application 速 Earthmover Service

速Grader Service HEAT RESISTANT

CUT RESISTANT

TRACTION

CUT RESISTANT

TRACTION

HEAT RESISTANT

Size

Type

Size

Ply Rating

T/T

9.00-20

RL(E3) 10.00-20 11.00-20 12.00-20 12.00-24 14.00-24 16.00-25 18.00-25 37.25-35

T/T T/T T/T T/T T/T T/L T/L T/L

14 14 18 20 24 28 28 32 36

T/L T/L T/L T/L

16 20 16 20 24 20 24 26 22 28

9.00-20

Ply Rating

T/T

T/L T/T T/L T/T T/T T/L T/L T/T

12 10 12 14 12 16 16 12 12 12

T/T

FG(G2) 13.00-24 TG 14.00-24 TG 16.00-24 TG 17.5-25 20.5-25 RL(G3) 16.00-24 TG

T/T: Tube Type T/L: Tubeless Type

Type

GL(G2)

VL2(E3) 20.5-25 23.5-25 26.5-25 29.5-25

RG(G1)

WL(E3) 9.00-20

ROCK

VL2

ROCK

T/T: Tube Type T/L: Tubeless Type TG: For Semi-Drop Center Rim

BIAS TIRE 57

速Loader & Dozer Service HEAT RESISTANT

CUT RESISTANT

FGF NL

VL2

Size

Type

Ply Rating

T/T

FG(L2) 23x8.50-12 27x8.50-15 33x12.5-15 12.5/70-16 10-16.5 12-16.5 15.5/60-18 15.5/70-18 10.00-20 11.00-20 15.5/70-20 42x17-20 17.5/65-20 13.00-24 TG 14.00-24 TG 16.9-24 18.4-24 17.5-25 20.5-25

Type

10.00-20

Ply Rating

4 4 8 68 68 8 10 8 8 8 10 12 14 10 16 10 10 10 12 12 12 12 10 10 12 12 12

12.00-24 14.00-24 16.00-24 TG

STMS

Size

Type

Ply Rating

VL2(L3) T/T

15.5-25 17.5-25

RL(L3) T/T T/T T/T T/L T/L T/L T/T T/L T/L T/T T/T T/L T/T T/L T/L T/T T/L T/T T/T T/T T/L T/L T/T

RLS

FGF(L2)

GL(L2) 9.00-20

Size

T/T T/T T/T

ROCK

TRACTION

CUT RESISTANT

TRACTION

HEAT RESISTANT

16 20 24 16

20.5-25 23.5-25 26.5-25 29.5-25

T/L T/L T/T T/L T/T T/L T/T T/L T/T T/L

12 16 16 16 20 16 20 16 20 24 16 20 24

T/T T/L T/L

20 26 28

20 24 26

24 22 28

RLS(L4) 14.00-24 26.5-25 29.5-25

T/T: Tube Type T/L: Tubeless Type TG: For Semi-Drop Center Rim

Size

NL(L4) 35/65-33

Type

Ply Rating

T/L

T/L T/L T/L T/L T/L T/L T/L T/L T/L

16 12 16 20 28 42 56 58 62 62

Type

Ply Rating

T/T T/T T/L T/L T/L T/L

16 20 20 20 24 28 32 32 36 34

STMS(L5S)

DL(L5) 17.5-25 20.5-25 23.5-25 29.5-25 35/65-33 40/65-39 45/65-45 50/65-51 65/65-57

Size

12.00-24 14.00-24 17.5-25 18.00-25 26.5-25 29.5-29

T/T: Tube Type T/L: Tubeless Type

BIAS TIRE 59

速Compactor Service Size

Type

速Industrial Service

Ply Rating

10.5/80-16 9.00-20 14/70-20

Type

Ply Rating

12.00-20 14.00-24 14.00-24 TG 16.00-25

T/T T/T T/L T/L T/T T/L T/L T/L

20 24 28 24 28 32 28 40 40 40

T/L

28 32

T/L T/L T/L

40 36 40

T/T T/L

20 40

T/L

RR(C1) 7.50-15 9.5/65-15 7.50-16

Size

T/T T/T T/L T/T T/L T/T T/T

12 6 6 6 6 10 12

T/T

RL 18.00-25 21.00-25 21.00-35

AL2(C2) 23.1-26

RLS 16.00-25

AL2

RLS

ELS2 18.00-25 18.00-33 21.00-35

速Sand Service SCP2(E7) 14.00-20

ELS2 T/T

SCP2

STMS 12.00-24 18.00-25

STMS

YS2 16.00-25

YS2

T/T: Tube Type T/L: Tubeless Type

T/T: Tube Type T/L: Tubeless Type TG: For Semi-Drop Center Rim

BIAS TIRE 61

3. Technical Data Ply Rating

TRA Code or Application

Spec

TKPH TMPH

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

OTD mm

Minimum Dual Spacing mm inch

Recommended Rim/Flange Height

5JA

Pattern

inch

576 22.7

215 8.5

265 10.4

223 8.8

14.5

220 32

240 35

260 38

PR kg lbs

4 550 585 620 655 685 1210 1290 1365 1445 1510

209 8.2

360 14.2

225 8.9

250 9.8

6.00GS

kPa psi

350 51

686 27.0

208 8.2

317 12.5

218 8.6

16.5

7JA

671 26.4

238 9.4

312 12.3

242 9.5

7JA

33x12.5-15

851 33.5

318 12.5

TBA TBA

22.5

10.00F

7.50-16

814 32.0

225 8.9

379 14.9

243 9.6

776 30.6

214 8.4

361 14.2

224 8.8

250 9.8

6.00GS 6LB

16" RR

10.5/80-16 Tubeless

812 32.0

272 10.7

376 14.8

282 11.1

8LB

12.5/70-16 Tubeless

6 8

860 33.9

319 12.6

389 15.3

336 13.2

21.0

10LB

6 8

771 30.4

268 10.6

353 13.9

278 10.9

19.5

8.25

16.5" FG

8 10

831 32.7

315 12.4

376 14.8

325 12.8

20.0

9.75

Compactor PR 10 kg 5 lbs kPa psi Loader PR 10 kg 5 lbs Compactor PR 10 kg 5 lbs kPa psi Loader PR 10 kg 5 lbs C1 PR Compactor kg 10 lbs 5

Loader 10 5 Loader 10 5

PR kg lbs PR kg lbs PR kg lbs PR kg lbs

375 54

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 84

600 87

625 91

650 94

675 98

700 102

725 105

750 109

12 1700 1750 1850 1900 1950 2060 2120 2180 2240 2300 2300 2360 2430 2500 2575 2575 2650 3740 3860 4080 4180 4300 4540 4680 4800 4940 5080 5080 5200 5360 5520 5680 5680 5840

180 26

200 29

220 32

240 35

260 38

280 41

300 44

325 47

4 695 740 780 820 860 1530 1630 1720 1805 1895 6 1100 1155 1205 1255 1315 2430 2550 2560 2770 2900

120 17

140 20

160 23

180 26

200 29

220 32

240 35

260 38

7.50-15

775 30.5

27x8.50-15

9.5/65-15

280 41

300 44

325 47

350 51

375 54

400 58

425 62

450 65

8 1510 1605 1695 1785 1870 1950 2035 2130 3330 3540 3735 3935 4125 4300 4485 4695 6 1405 1470 1535 1600 1675 1750 1820 1890 3100 3240 3380 3530 3690 3860 4010 4170

6 1645 1725 1800 1875 3630 3800 3970 4130 6 8 1050 1145 1240 1330 1410 1495 1570 1645 2315 2525 2735 2930 3110 3295 3460 3625 6 8 1140 1215 1285 1350 1415 1475 1540 1610 1685 1750 1820 2515 2680 2830 2975 3120 3250 3395 3550 3715 3860 4010 8 1470 1565 1655 1740 1820 1905 1980 2075 2170 3240 3450 3650 3835 4010 4200 4365 4575 4785

33x12.5-15

12-16.5

200 29

7.50-16

12-16.5 Tubeless

180 26

12.5/70-16 10.5/80-16

9.5/65-15

16.5" 10-16.5 Tubeless

Loader 10 5

kPa psi

15" RR

16" 7.50-16 Tubeless

Size

23x8.50-12

27x8.50-15

Tire Load Limits at Various Cold Inflation Pressures

12" FG

15" 7.50-15

Application Max.Speed km/h mph

10-16.5

12" 23x8.50-12

Pattern

10 2540 5600

12-16.5

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

BIAS TIRE 63

Ply Rating

TRA Code or Application

Spec

TKPH TMPH

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

OTD mm

Minimum Dual Spacing mm inch

Recommended Rim/Flange Height

W10

Pattern

inch

932 36.7

391 15.4

416 16.4

404 15.9

21.5

1035 40.7

405 15.9

459 18.1

424 16.7

20.5

W13

1023 40.3

267 10.5

473 18.6

291 11.5

15.0

7.00T

20" RG GL

1005 39.6

265 10.4

458 18.0

297 11.7

310 12.2

G2, L2

1023 40.3

255 10.0

478 18.8

276 10.9

21.0

SCR

1027 40.4

257 10.1

466 18.3

280 11.0

19.5

310 12.2

FGF

11.00-20

10 12 14 16

1064 41.9

281 11.1

479 18.9

307 12.1

24.0

1057 41.6

276 10.9

478 18.8

302 11.9

18.0

334 13.1

CRT

1067 42.0

285 11.2

489 19.3

304 12.0

22.5

10 16

1100 43.3

299 11.8

510 20.0

323 12.7

24.5

352 13.9

CRT

1091 43.0

296 11.7

514 20.2

311 12.2

24.0

FG FGF

Loader 10 5

PR kg lbs PR kg lbs

8 1525 1670 1805 1935 2060 2195 3360 3680 3980 4265 4540 4840 8 1725 1885 2040 2185 2325 2455 3800 4155 4495 4815 5125 5410

Grader 40 25

PR kg lbs

Compactor 10 5 Loader 10 5

E/M 50 30

Loader 10 5

E/M 50 30

8.00V Loader 10 5

344 13.5 RL

For the TKPH(TMPH) Ratings, please refer to page 11.

120 17

7.50V

kPa psi

E/M 50 30

140 20

160 23

180 26

200 29

220 32

240 35

260 38

280 41

300 44

325 47

350 51

375 54

400 58

425 62

450 65

475 69

500 73

15.5/60-18

15.5/70-18

10.00-20

Size

10 14 955 1035 1110 1180 1245 1310 1375 1435 1495 1565 1635 1705 1780 1850 1910 1965 2025 2110 2280 2450 2600 2740 2890 3040 3160 3300 3460 3600 3760 3920 4060 4210 4340 4480

kPa psi

350 51

375 54

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

675 98

700 102

PR kg lbs PR kg lbs

10 2900 3000 3150 3250 3350 3450 3550 3650 6400 6600 6950 7150 7400 7600 7850 8050

kPa psi

200 29

PR kg lbs

14 1280 1350 1420 1490 1555 1620 1695 1770 1845 1915 1985 2055 2120 2185 2245 2310 2820 2980 3130 3280 3430 3570 3740 3900 4070 4220 4380 4530 4670 4820 4950 5090

kPa psi

475 69

PR kg lbs

10 12 14 16 3550 3650 3750 3875 4000 4125 4125 4250 4345 4440 4530 4620 7850 8050 8250 8550 8800 9100 9100 9350 9580 9790 9990 10180

kPa psi

200 29

PR kg lbs

14 1445 1530 1610 1685 1760 1830 1920 2005 2085 2170 2245 2320 2395 2470 3190 3370 3550 3710 3880 4030 4230 4420 4600 4780 4950 5110 5280 5450

kPa psi

450 65

PR kg lbs

10 16 3750 3875 4000 4125 4250 4250 4375 4500 4675 4780 4880 8300 8550 8800 9100 9350 9350 9650 9900 10300 10540 10740

kPa psi

200 29

PR kg lbs

14 1570 1660 1750 1830 1910 1990 2085 2180 2270 2355 2440 2525 2605 3460 3660 3860 4030 4210 4390 4600 4810 5000 5190 5380 5570 5740

9.00-20

20" 9.00-20

Tire Load Limits at Various Cold Inflation Pressures

18" FG

15.5/70-18 Tubeless

Application Max.Speed km/h mph

14 3150 3250 3350 3450 3450 3550 3630 3710 3790 3875 6950 7150 7400 7600 7600 7850 8000 8190 8360 8550

220 32

500 73

220 32

475 69

220 32

240 35

525 76

240 35

500 73

240 35

260 38

550 80

260 38

525 76

260 38

280 41

575 83

280 41

550 80

280 41

300 44

600 87

300 44

575 83

300 44

325 47

625 91

325 47

600 87

325 47

350 51

650 94

350 51

625 91

350 51

375 54

675 98

375 54

650 94

375 54

400 58

700 102

400 58

675 98

400 58

425 62

725 105

425 62

450 65

475 69

500 73

525 76

550 80

750 109

450 65

475 69

500 73

10.00-20

18" 15.5/60-18 Tubeless

Pattern

700 102

425 62

450 65

475 69

11.00-20

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

BIAS TIRE 65

SCR

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 1138 316 513 331 44.8 12.4 20.2 13.0

OTD mm

25.5

Minimum Dual Spacing mm inch 382 15.0

Recommended Rim/Flange Height

Pattern

inch 8.50V

14.00-20

SCP2

Industrial Service

IDU

Application Max.Speed km/h mph

E/M 50 30 IDU

Tire Load Limits at Various Cold Inflation Pressures kPa psi

275 40

300 44

325 47

350 51

375 54

400 58

PR kg lbs

18 2180 2300 2430 2500 2650 2725 2800 2900 3000 3075 4800 5080 5360 5520 5840 6000 6150 6400 6600 6800

SCP2

970 38.2

380 15.0

448 17.6

392 15.4

42x17-20

17.5/65-20 Tubeless

24" 12.00-24

1072 42.2

410 16.1

TBA TBA

21.5

1077 42.4

431 17.0

TBA TBA

25.5

1107 43.6

450 17.7

TBA TBA

25.0

1238 48.7

326 12.8

576 22.7

341 13.4

24.5

1257 49.5

330 13.0

584 23.0

346 13.6

1275 50.2

321 12.6

606 23.9

339 13.3

kPa psi

11.00TG

W13

14.00TG

W14L

8.5 8.50V

E3 L3

DE2

66 -

45 -

STMS

16 20

D2A

L5S

D2A

391 15.4 55.0

Industrial Service

IDU

G2 G2, L2

G2A DG2

10 12

G2 L2

G2A D2A

STMS

140 20

160 23

180 26

200 29

220 32

240 35

260 38

280 41

300 44

325 47

350 51

375 54

400 58

425 62

450 65

PR kg lbs PR kg lbs PR kg lbs PR kg lbs

2130 2330 2520 2700 4695 5135 5555 5950

12 2775 2905 3035 3160 3310 3460 3600 3740 3875 4005 6100 6400 6700 6950 7300 7650 7950 8250 8550 8850 10 2475 2620 2755 2890 5455 5775 6075 6370 10 2915 3080 3240 3395 3545 3690 6425 6790 7140 7485 7815 8135 10 2875 3040 3195 6340 6700 7045

kPa psi

275 40

375 54

PR kg lbs

16 20 2500 2575 2725 2800 3000 3075 3150 3250 3350 3450 3550 3650 5520 5680 6000 6150 6600 6800 6950 7150 7400 7600 7850 8050

kPa psi

475 69

1835 2010 2175 2330 4045 4430 4795 5135 2740 6040

Loader 10 5 IDU

300 44

500 73

325 47

525 76

350 51

550 80

575 83

400 58

600 87

1286 50.6

340 13.4

588 23.1

374 14.7

28.0

625 91

450 65

650 94

475 69

675 98

500 73

700 102

525 76

725 105

550 80

750 109

775 112

800 115

825 120

See characteristics page 77

8.00TG (10.00VA)

For the TKPH(TMPH) Ratings, please refer to page 11.

425 62

PR 16 20 kg 5000 5150 5300 5450 5600 5600 5800 6000 6150 6270 6410 6540 6660 6780 6900 lbs 11000 11400 11700 12000 12300 12300 12800 13200 13600 13790 14100 14390 14700 14900 15200

See characteristics page 76

E/M 50 30

8.5 8.50V RL STMS

13.00-24 TG

Compactor 10 5 Loader 10 5 Loader 10 5 Loader 10 5

120 17

24" RL

13.00-24 TG Tubeless

500 73

See characteristics page 79

15.5/70-20 Tubeless

475 69

Sand

See characteristics page 78

14/70-20

450 65

See characteristics page 77

See characteristics page 76

425 62

Size

12.00-20

TKPH TMPH

14.00-20

Spec

14/70-20

TRA Code or Application

17.5/65-20 42x17-20 15.5/70-20

Ply Rating

12.00-24

12.00-20

Pattern

Grader 40 25 Loader 10 5

kPa psi

125 18

150 22

175 25

200 29

225 33

250 36

275 40

300 44

PR kg lbs PR kg lbs

10 12 1700 1900 2060 2240 2360 2500 2650 2725 3740 4180 4540 4940 5200 5520 5840 6000

325 47

350 51

375 54

400 58

425 62

450 65

12 4500 4750 5000 5150 5300 5600 9900 10500 11000 11400 11700 12300

13.00-24 TG

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

BIAS TIRE 67

14.00-24

Pattern RL

RLS

STMS

TRA Code or Application

Spec

E2A

109

D2A IDU

L3 Industrial Service

D2A

Ply Rating 28 24

L5S

TKPH TMPH

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 1355 387 627 400 53.3 15.2 24.7 15.7

OTD mm

28.0

Minimum Dual Spacing mm inch 450 17.7

Recommended Rim/Flange Height

Pattern

inch 10.00W

RL See characteristics page 76

D2A

1407 55.4

390 15.4

646 25.4

440 17.3

48.0

1373 54.1

367 14.4

646 25.4

391 15.4

78.0

450 17.7

Application Max.Speed km/h mph

E/M 50 30

300 44

325 47

350 51

375 54

400 58

RL RLS STMS RL

Loader 10 5 IDU

425 62

275 40

PR kg lbs

24 28 3350 3550 3750 3875 4000 4250 4375 4500 4625 4750 4875 5000 5150 5300 5450 5600 7400 7850 8250 8550 8800 9350 9650 9900 10200 10500 10700 11000 11400 11700 12000 12300

575 83

PR kg lbs

450 65

600 87

475 69

625 91

500 73

650 94

525 76

675 98

550 80

Size

kPa psi

10.00W

Tire Load Limits at Various Cold Inflation Pressures

700 102

575 83

725 105

600 87

750 109

625 91

775 112

650 94

800 115

825 120

850 124

20 24 7500 7750 8000 8250 8250 8500 8670 8830 9000 9170 9330 9500 16500 17100 17600 18200 18200 18700 19100 19500 19800 20200 20600 21000

14.00-24

Tire Size

See characteristics page 77

1336 52.6

375 14.8

606 23.9

374 14.7

G2, L2

DG2

1336 52.6

390 15.4

TBA TBA

Industrial Service

IDU

G2A

31.0

8.00TG (10.00VA) FG 8.00TG 10.00VA FG

See characteristics page 76

RL 14.00-24 TG

1336 52.6

16.00-24 TG

16.9-24

375 14.8

606 23.9

395 15.6

D2A

G2A

G3, L3

DG2

400 15.7

31.0

10.00VA (8.00TG) 10.00VA

390 15.4

TBA TBA

1453 57.2

438 17.2

638 25.1

500 19.7

32.5

1478 58.2

419 16.5

671 26.4

446 17.6

33.5

513 20.2

1320 52.0

447 17.6

591 23.3

462 18.2

30.5

150 22

175 25

200 29

225 33

250 36

275 40

300 44

325 47

350 51

PR kg lbs PR kg lbs

12 14 16 2060 2300 2500 2650 2800 3075 3250 3450 3550 3650 4540 5080 5520 5840 6150 6800 7150 7600 7850 8050

375 54

400 58

425 62

12 6300 13900

10.00VA

See characteristics page 77

FG RL RL

Grader 40 25 Loader 10 5

W15L FG

18.4-24

1385 54.5

483 19.0

612 24.1

516 20.3

32.5

W16L

25" 15.5-25 Tubeless

VL2

D2A

1284 50.6

410 15.6

568 22.4

448 17.6

27.0

12.00/1.3

Loader L2 10 5 L2

PR kg lbs PR kg lbs

16 2650 3000 3250 3450 3650 4000 4250 4500 5840 6600 7150 7600 8050 8800 9350 9900

kPa psi

120 17

PR kg lbs PR kg lbs

10 2300 2520 2725 2920 3105 3280 3455 5070 5555 6005 6435 6845 7230 7615 10 2765 3025 3270 3505 3725 3940 6095 6670 7210 7725 8210 8685

kPa psi

225 33

PR kg lbs

12 4000 4250 4500 4750 4875 5150 5300 5600 8800 9350 9900 10500 10700 11400 11700 12300

16 7100 7300 7750 8000 8250 15700 16100 17100 17600 18200

140 20

160 23

180 26

200 29

220 32

240 35

25"

VL2

For the TKPH(TMPH) Ratings, please refer to page 11.

125 18

8.00TG (10.00VA)

430 16.9

1330 52.3

Grader 40 25 Loader 10 5 IDU

kPa psi

14.00-24 TG

G2A

16.00-24 TG

16.9-24

18.4-24

Loader 10 5

250 36

275 40

300 44

325 47

350 51

375 54

400 58

15.5-25

14.00-24 TG Tubeless

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

BIAS TIRE 69

TRA Code or Application

Spec

E2A

TKPH TMPH 139

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 1478 432 671 459 58.2 17.0 26.4 18.1

OTD mm

33.5

Minimum Dual Spacing mm inch 513 20.2

Recommended Rim/Flange Height

Pattern

inch 11.25/2.0

RL RLS YS2

Industrial Service

IDU

RLS

28 32

Industrial Service

IDU

YS2

Industrial Service

IDU

16.00-25

Industrial Service

IDU

17.5-25 Tubeless

G2, L2

DG2

1345 53.0

450 17.7

596 23.5

472 18.6

27.5

VL2

D2A

1348 53.1

444 17.5

597 23.5

470 18.5

30.5

D2A

1410 55.5

445 17.5

656 25.8

470 18.5

69.5

STMS

L5S

D2A D2Z

1385 54.5

450 17.7

645 25.4

462 18.2

69.0

E/M 50 30 IDU

225 33

250 36

PR kg lbs

275 40

300 44

325 47

350 51

VL2

D2A

1348 53.1

444 17.5

597 23.5

470 18.5

30.5

18.00-25 Tubeless

E2A

173

118

1602 63.1

503 19.8

727 28.6

572 22.5

37.5

587 23.1

Industrial Service

IDU

14.00/1.5

ELS2

Industrial Service

IDU

STMS

24 28 32 40

L5S

D2A

Industrial Service

IDU

Grader 40 25

kPa psi

125 18

PR kg lbs

12 2120 2360 2575 2900 4680 5200 5680 6400

kPa psi

13.00/2.5

FG VL2 DL STMS

Loader 10 5

E/M 50 30

STMS

See characteristics page 76

762 30.0

550 21.7

84.0

425 62

450 65

475 69

500 73

525 76

550 80

575 83

150 22

175 25

200 29

13.00/2.5

RL ELS2 STMS

Loader 10 5 IDU

225 33

250 36

275 40

300 44

325 47

350 51

375 54

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 83

PR 12 16 20 kg 4750 5000 5300 5600 5800 6150 6300 6700 6900 7100 7300 7500 7750 8000 8250 lbs 10500 11000 11700 12300 12800 13600 13900 14800 15200 15700 16100 16500 17100 17600 18200

PR kg lbs

kPa psi

520 20.5

400 58

See characteristics page 77

17.5-25

1675 65.9

375 54

Size

28 4375 4625 4875 5000 5300 5450 5600 5800 6000 6300 6500 6500 6700 9650 10200 10700 11000 11700 12000 12300 12800 13200 13900 14300 14300 14800

See characteristics page 76

32 5600 6000 6300 6500 6900 7100 7300 7500 7750 8000 8250 8500 8750 12300 13200 13900 14300 15200 15700 16100 16500 17100 17600 18200 18700 19300

375 54

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

675 98

700 102

725 105

750 109

PR 24 28 32 kg 10000 10450 10900 11500 11500 11800 12150 12500 12850 13200 13600 13600 14000 14500 14500 15000 lbs 22000 23000 24000 25400 25400 26000 26800 27600 28300 29100 30000 30000 30900 32000 32000 33100

See characteristics page 77

For the TKPH(TMPH) Ratings, please refer to page 11.

Tire Load Limits at Various Cold Inflation Pressures kPa psi

28 32

Application Max.Speed km/h mph

16.00-25

Ply Rating

17.5-25

16.00-25 Tubeless

Pattern

18.00-25

Tire Size

See characteristics page 76 1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

BIAS TIRE 71

Spec

G2, L2

DG2

E3 L3

DE2

80 -

55 -

1494 58.8

542 21.3

641 25.2

587 23.1

33.0

16 20

OTD mm

29.5

Recommended Rim/Flange Height inch 17.00/1.7 (12,16PR) 17.00/2.0

Pattern

VL2

FG DL

12 16

D2A

1558 61.3

548 21.6

714 28.1

570 22.4

79.5

G2, L2

DG2

1493 58.8

534 21.0

652 25.7

551 21.7

29.5

VL2

16 20

D2A

1494 58.8

542 21.3

641 25.2

587 23.1

33.0

21.00-25 Tubeless

Industrial Service

IDU

23.5-25 Tubeless

VL2

16 20 24 20

E3 L3

DE2

D2A

1673 65.9

616 24.3

779 30.7

646 25.4

88.0

23.5-25

VL2

D2A

1607 63.3

618 24.3

682 26.9

688 27.1

43.0

26.5-25 Tubeless

VL2

16 20 24 20 24 26 24 26

E3 L3

DE2

132 -

90 -

1738 68.4

683 26.9

745 29.3

734 28.9

44.0

20.5-25

RLS

107 -

kPa psi

125 18

150 22

175 25

200 29

225 33

250 36

73 -

1607 63.3

618 24.3

682 26.9

688 27.1

43.0

275 40

300 44

325 47

PR kg lbs PR kg lbs

16 20 4125 4500 4875 5150 5450 5800 6000 9100 9900 10700 11400 12000 12800 13200 12 2800 3150 3550 6150 6950 7850

350 51

375 54

400 58

Size 425 62

450 65

FG VL2 DL

Loader 10 5

IDU

PR kg lbs

12 16 20 6300 6700 7100 7500 7750 8250 8500 8750 9250 9500 13900 14800 15700 16500 17100 18200 18700 19300 20400 20900

See characteristics page 77

kPa psi

19.50/2.5 VL2 DL

D2A

D2A D2A

1785 70.3

700 27.6

800 31.5

736 29.0

67.0

32 36

L5S

D2A

1798 70.8

680 26.8

827 32.6

719 28.3

95.0

26.5-25

VL2

D2A

1738 68.4

683 26.9

745 29.3

734 28.9

44.0

29.5-25 Tubeless

VL2

E3 L3

DE2

150 -

103 -

1850 72.8

770 30.3

792 31.2

833 32.8

49.0

RLS

D2A

1912 75.3

784 30.9

813 32.0

805 31.7

74.0

D2A

1900 74.8

768 30.2

873 34.4

805 31.7

105.5

For the TKPH(TMPH) Ratings, please refer to page 11.

E/M 50 30 Grader 40 25

Tire Load Limits at Various Cold Inflation Pressures

See characteristics page 76

STMS

22 28

Application Max.Speed km/h mph

VL2

22.00/3.0

25.00/3.5

Loader 10 5 E/M 50 30

175 25

200 29

225 33

PR kg 8000 lbs 17600 PR 16 kg 5300 5800 6150 lbs 11700 12800 13600

250 36

275 40

300 44

16 8500 9000 9500 18700 19800 20900 20 6500 6900 7300 14300 15200 16100

325 47

350 51

375 54

400 58

425 62

450 65

475 69

500 73

525 76

550 80

20 24 10000 10600 10900 11200 11800 12150 12500 22000 23400 24000 24700 26000 26800 26700 24 7750 8000 17100 17600

VL2

E/M 50 30

VL2 RLS STMS

Loader 10 5

PR kg lbs

20 24 26 32 12150 12500 13200 13600 14000 14500 15000 15500 16000 16500 17000 26800 27600 29100 30000 30900 32000 33100 34200 35300 36480 37500

VL2

E/M 50 30 Loader 10 5

PR 22 kg 8000 8750 9250 10000 10600 lbs 17600 19300 20400 22000 23400 PR kg 12150 12850 13600 lbs 26800 28300 30000

28 10900 11500 24000 25400 22 28 14500 15000 16000 16500 17000 17500 32000 33100 35300 36480 37500 38600

VL2 RLS DL

630 92

23.5-25

VL2

TKPH TMPH

20.5-25

TRA Code or Application

21.00-25

Minimum Dual Spacing mm inch -

Ply Rating

PR 20 24 26 kg 6700 7300 7750 8250 8750 9250 9500 lbs 14800 16100 17100 18200 19300 20400 20900 36 18600 41000

26.5-25

20.5-25 Tubeless

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch 1493 534 652 551 58.8 21.0 25.7 21.7

Pattern

29.5-25

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

BIAS TIRE 73

Ply Rating

TRA Code or Application

Spec

TKPH TMPH

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

OTD mm

Minimum Dual Spacing mm inch

Recommended Rim/Flange Height

DW20A DW20B

Pattern

inch

1472 58.0

595 23.4

654 25.7

618 24.3

19.0

kPa psi

29" -

2023 79.6

749 29.5

931 36.7

792 31.2

103.0

kPa psi

25.00/3.5

ELS2

Industrial Service

IDU

33" ELS2

PR kg lbs

225 33

250 36

275 40

300 44

D2V

2085 82.1

890 35.0

953 37.5

928 36.5

62.5

D2V

2085 82.1

890 35.0

979 38.5

945 37.2

97.0 97.0

Industrial Service

IDU

ELS2

Industrial Service

IDU

E1A

358

245

1060 41.7

1000 39.4

51.5

375 54

400 58

425 62

450 65

475 69

500 73

525 76

34 12850 14000 14500 15500 16000 17000 17500 18000 19000 19500 20000 20600 21200 28300 30900 32000 34200 35300 37500 38600 39700 41900 43000 44100 45400 46700

kPa psi NL DL

Loader 10 5

275 40

300 44

325 47

350 51

375 54

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

PR 24 42 kg 16500 17000 18000 19000 19500 20000 21200 21800 22400 23000 23600 24300 25000 25750 26500 lbs 36480 37500 39700 41900 43000 44100 46700 48100 49400 50700 52000 53600 55100 56800 58400

IDU See characteristics page 79

See characteristics page 78

955 37.6

350 51

IDU

28.00/3.5

35" RL ELS2

2330 91.7

325 47

See characteristics page 77

kPa psi

31.00/4.0 E/M 50 30

175 25

200 29

225 33

250 36

275 40

300 44

325 47

PR 36 kg 13600 14500 15500 16500 17500 18500 19500 lbs 30000 32000 34200 36400 38600 40800 43000

39" DL

D2V

2420 95.3

1020 40.2

1112 43.8

1070 42.1

106.5

kPa psi

32.00/4.0 DL

45" 45/65-45 Tubeless

D2V

2730 107.5

1146 45.1

1261 49.6

1185 46.6

116.0

36.00/4.5

45" DL

51" 50/65-51 Tubeless

D2A D2V

3070 120.9

1260 49.6

1412 55.6

1300 51.2

127.5

40.00/4.5

51" DL

57" 65/65-57 Tubeless

D2V

3735 147.0

1640 64.6

1672 65.8

1706 67.2

142.5

52.00/6.0

57" DL

For the TKPH(TMPH) Ratings, please refer to page 11.

200 29

See characteristics page 76

39" 40/65-39 Tubeless

Loader 10 5

175 25

29.5-29

D2A D2Z

18.00-33

L5S

35/65-33

21.00-35

STMS

37.25-35

37.25-35 Tubeless

8 2850 6285

275 40

300 44

325 47

350 51

375 54

400 58

425 62

450 65

475 69

500 73

525 76

550 80

575 83

600 87

625 91

650 94

675 98

700 102

Loader 10 5

PR 56 kg 22400 23600 25000 25750 27250 28000 29000 30000 30750 31500 32500 34500 34500 36500 37500 38750 40000 41250 lbs 49400 52000 55100 56800 60000 61500 64000 66000 68000 69500 71500 76100 76000 80500 82700 85400 88200 90900

Loader 10 5

PR 58 kg 30000 31500 32500 34500 35500 37500 38750 40000 41250 42500 43750 45000 46250 47250 48250 49250 50000 lbs 66000 69500 71500 76000 78500 82500 85500 88000 91000 93500 96500 99000 102000 104200 106400 108600 110000

Loader 10 5

PR 62 kg 37500 40000 42500 43750 46250 47500 48750 51500 53000 54500 56000 58000 58000 60000 61500 63000 lbs 82500 88000 93500 96500 102000 104500 107500 113500 117000 120000 123500 128000 128000 132500 135500 139000

Loader 10 5

PR 62 kg 67000 71000 73000 77500 80000 82500 87500 90000 92500 95000 lbs 147500 156500 161000 171000 176500 182000 193000 198500 204000 209500

40/65-39

35" 21.00-35 Tubeless

Compactor PR 10 kg 5 lbs

110 16

45/65-45

35/65-33 Tubeless

Size

23.1-26

STMS

33" 18.00-33 Tubeless

Tire Load Limits at Various Cold Inflation Pressures

26" AL2

AL2

29" 29.5-29 Tubeless

Application Max.Speed km/h mph

50/65-51

26" 23.1-26

Pattern

65/65-57

Tire Size

1) Figures under the star rating denote the maximum load and inflation pressures. 2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.

BIAS TIRE 75

TRA Code or Application

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

OTD mm

Minimum Dual Spacing mm inch

Recommended Rim/Flange Height

Pattern

Size

1138 44.8

316 12.4

507 20.0

348 13.7

24.0

378 14.9

8.50V

Industrial Service

1275 50.2

321 12.6

606 23.9

339 13.3

55.0

391 15.4

8.50V

14.00-24

24 28

Industrial Service

1355 53.3

367 14.4

627 24.7

400 15.7

28.0

450 17.7

10.00W

14.00-24 TG Tubeless

Industrial Service

1360 53.5

395 15.6

614 24.2

410 16.1

28.0

450 17.7

10.00VA

11.25/2.0

Industrial Service

1495 58.9

445 17.5

671 26.4

459 18.1

33.5

513 20.2

RLS

28 32

Industrial Service

1548 60.9

438 17.2

722 28.4

460 18.1

57.0

513 20.2

YS2

Industrial Service

1465 57.7

430 16.9

658 25.9

472 18.6

49.2

513 20.2

16.00-25

Industrial Service

1478 58.2

445 17.5

671 26.4

459 18.1

33.5

513 20.2

18.00-25 Tubeless

Industrial Service

1608 63.3

508 20.0

727 28.6

572 22.5

36.0

587 23.1

ELS2

Industrial Service

1685 66.3

515 20.3

796 31.3

530 20.9

66.5

587 23.1

STMS

Industrial Service

1675 65.9

520 20.5

762 30.0

550 21.7

84.0

587 23.1

Industrial Service

1745 68.7

560 22.0

775 30.5

620 24.4

41.0

ELS2

Industrial Service

1860 73.2

509 20.0

887 34.9

533 21.0

66.5

Creep Creep

5 3

10 5

15 9

20 12

25 15

30 19

IDU

Load Wheel Steering Wheel

1000 145 1000 145

kg lbs kg lbs

11880 26200 9505 20960

10560 23290 8450 18630

9570 21100 7655 16880

8910 19650 7130 15720

8580 18920 6865 15135

8380 18480 6705 14785

8250 18190 6600 14550

8185 18050 6550 14440

IDU

Load Wheel Steering Wheel Load Wheel Steering Wheel Load Wheel Steering Wheel

1000 145 1000 145 1000 145 1000 145 1000 145 1000 145

kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs

12420 27385 9935 21910 17100 37705 13680 30165 18000 39690 14400 31750

11040 24345 8830 19475 15200 33515 12160 26810 16000 35280 12800 28225

10005 22060 8005 17650 13775 30375 11020 24300 14500 31970 11600 25580

9315 20540 7450 16430 12825 28280 10260 22625 13500 29765 10800 23815

8970 19780 7175 15825 12350 27230 9880 21785 13000 28665 10400 22930

8765 19320 7010 15455 12065 26605 9650 21280 12700 28005 10160 22400

8625 19020 6900 15215 11875 26185 9500 20945 12500 27560 10000 22050

8555 18865 6845 15090 11780 25975 9425 20780 12400 27340 9920 21875

Load Wheel Steering Wheel Load Wheel Steering Wheel

900 131 900 131 1000 145 1000 145

kg lbs kg lbs kg lbs kg lbs

20700 45645 16560 36515 22500 49610 18000 39690

18400 40570 14720 32455 20000 44100 16000 35280

16675 36770 13340 29415 18125 39965 14500 31970

15525 34230 12420 27385 16875 37210 13500 29765

14950 32965 11960 26370 16250 35830 13000 28665

14605 32205 11685 25765 15875 35005 12700 28005

14375 31695 11500 25355 15625 34455 12500 27560

14260 31445 11410 25155 15500 34175 12400 27340

25" RL RLS YS2

0 Static

IDU

13.00/2.5

RL ELS2 STMS

IDU

Load Wheel Steering Wheel

1000 145 1000 145

kg lbs kg lbs

30600 67475 24480 53980

27200 59975 21760 47980

24650 54355 19720 43480

22950 50605 18360 40485

22100 48730 17680 38985

21590 47605 17270 38085

21250 46855 17000 37485

21080 46480 16865 37185

668 26.3

15.00/3.0

IDU

Load Wheel Steering Wheel

1000 145 1000 145

kg lbs kg lbs

36385 80230 29110 64185

32345 71320 25875 57055

29310 64630 23450 51705

27290 60170 21830 48135

26280 57950 21025 46360

25670 56610 20535 45290

25270 55720 20215 44575

25065 55270 20050 44215

21.00-25

28 32

km/h mph

587 23.1

13.00/2.5

IDU

Load Wheel Steering Wheel

1000 145 1000 145

kg lbs kg lbs

33300 73425 26640 58740

29600 65270 23680 52215

26825 59150 21460 47320

24975 55070 19980 44055

24050 53030 19240 42425

23495 51805 18795 41445

23125 50990 18500 40790

22940 50580 18350 40465

18.00-33

24" STMS

kPa psi

12.00-20

Industrial Service

12.00-24

STMS

33" 18.00-33 Tubeless

Tire Load Limits at Various Speeds

Industrial Service 20"

24" 12.00-24

21.00-25 Tubeless

Inflation Pressure

inch

25" 16.00-25 Tubeless

Ply Rating

Appli.

14.00-24

Industrial Service 20" 12.00-20 RL

Ply Rating

16.00-25

Pattern

33" ELS2

18.00-25

Tire Size

BIAS TIRE 77

35" 21.00-35 Tubeless

Pattern

Ply Rating

TRA Code or Application

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

OTD mm

Minimum Dual Spacing mm inch

Recommended Rim/Flange Height

15.00/3.0

Pattern

Ply Rating

Appli.

Inflation

Tire Load Limits at Various Speeds

Pressure

Size

inch

35" RL

Industrial Service

2000 78.7

575 22.6

937 36.9

648 25.5

41.0

701 27.6

ELS2

Industrial Service

2040 80.3

592 23.3

955 37.6

617 24.3

67.0

701 27.6

RL ELS2

IDU

Load Wheel Steering Wheel

kPa psi

km/h mph

0 Static

Creep Creep

5 3

10 5

15 9

20 12

25 15

30 19

1000 145 1000 145

kg lbs kg lbs

43740 96445 34990 77155

38880 85730 31105 68585

35235 77695 28190 62155

32805 72335 26245 57870

31590 69655 25270 55725

30860 68050 24690 54440

30375 66975 24300 53580

30130 66440 24105 53150

21.00-35

Tire Size

Off-the-Road Tires Used for Industrial Vehicle Applications 1) Industrial Vehicles comprise vehicles such as counter-balanced lift trucks, container handlers, straddle carriers, aircraft tow tractors, mobile crushers, log stackers etc., used on hard improved surfaces, smooth floors and runways. 2) Use Specifications of Industrial Service only. 3) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi). 4) For Speeds exceeding 30km/h (18mph), consult a Bridgestone Representative. 5) For tire sizes and star ratings other than listed above, consult a Bridgestone Representative. 6) For RTG (Rubber Tired Gantry Crane) operation, consult a Bridgestone Representative.

Sand Service 20" 14.00-20

Pattern

Ply Rating

TRA Code or Application

Approximate Inflated Dimensions OD OW SLR SLW mm mm mm mm inch inch inch inch

OTD mm

Minimum Dual Spacing mm inch

Recommended Rim/Flange Height

Pattern

Sand Service 20" SCP2

1206 47.5

370 14.6

TBA TBA

10.5

Max. Speed

Tire Load Limits at Various Cold Inflation Pressures (100kPa = 1bar)

Size

inch Â&#x203A; When

tires are to be used under conditions other than those recommended above, consult a Bridgestone Representative.

9.00V SCP2

Appli.

Sand

10km/h 5mph 50km/h 30mph 65km/h 40mph

kPa psi

70 10

100 15

140 20

170 25

210 30

240 35

kg lbs kg lbs kg lbs

1960 4320 1340 2950 1135 2500

2485 5480 1695 3740 1435 3160

2950 6500 2015 4440 1695 3740

3355 7400 2285 5040 1940 4280

3720 8200 2550 5620 2160 4760

4080 9000 2790 6150 2360 5200

14.00-20

Tire Size

BIAS TIRE 79

REMARKS & SPECIAL OPERATIONS 1. Remarks

1.2 The Variation in Load Carrying Capacity with Operating Speed

1.1 Excess Load

For Radial Tires

Due to the specialized nature of Off-The-Road vehicle usage, loads in excess of those in the appropriate above-listed load tables are often encountered. These excess loads result from items such as actual vehicle weight exceeding the design weight, varying density of materials, field modifications to the equipment, load transfer, etc. Only under these conditions, the actual tire load in service may exceed the above load ratings for the tire(*) by an amount not greater than shown in the following table:

For Radial Tires E2, E3, E4*

L**

Maximum Excess Load Maximum Excess Pressure Maximum Pressure

14%

800kPa

825kPa

116psi

120psi

(except for underground vehicles)

When excess loads are encountered, cold inflation pressures must be increased to compensate for higher loads. For each 1% increase in load, the inflation pressure must be increased by 2%. *except following sizes on the list

11.00R20 12.00R20

335/80R20 365/80R20

405/70R20 12R22.5

12.00R24

Maximum Speed (km/h) Static Creep 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 80<

E2, E3

* +12% +10% +8% +6% +4% +3% +2% 0 -2% -6% -12% -20%* -30%* -42%* *

0 -9% -18% -27%

L** +60% +30% +14% 0 -13% -20% -26% -30%

Reference speed for calculating load variance * Consult a Bridgestone Representative ** About the size of 55.5/80R57 and 60/80R57, consult a Bridgestone representative.

* * * *

This table doesn't secure to prevent the risk derived from heat buildup.

About 63" tires, consult a Bridgestone represetative. **except 55.5/80R57 and 60/80R57 The maximum excess loads will result in reduced tire performance.

Maximum Speed (km/h)

For Bias Tires L**

E2, E3, E4*

Maximum Excess Load

15%

Maximum Excess Pressure

30% 825kPa 120psi

30%

Maximum Pressure

L5/L5S*** 0%

+100kPa 825kPa 120psi

(except for underground vehicles)

9.00-20

10.00-20

11.00-20

**except following sizes on the list 5.70-12 23x8.50-12 27x8.50-15

33x12.5-15 12.5/70-16 10-16.5

12-16.5 12.5/65-18 15.5/60-18

15.5/70-18 15.5/70-20 42x17-20

17.5/65-20 16.9-24 18.4-24

***For L5/L5S tires following sizes on the list, on front tires for front end loaders, it is permissible to increase inflation pressure up to 100kPa (15psi) above, with no increase in load. (Maximum inflation pressure should not exceed 825 kPa (120psi).) 17.5-25 20.5-25 23.5-25

For Bias Tires

26.5-25 29.5-25 29.5-29

35/65-33 40/65-39 45/65-45

50/65-51 65/65-57

Static Creep 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 80<

E2, E3, E4**

* +12% +10% +8% +6% +4% +3% +2% 0 * * * * * * *

**except following sizes on the list

0 -9% -18% -27%

L***

+60% +30% +14% 0 -13% -20% -26% -30%

* 9.00-20

10.00-20

Reference speed for calculating load variance Consult a Bridgestone Representative

11.00-20

***except following sizes on the list 5.70-12 23x8.50-12 27x8.50-15

33x12.5-15 12.5/70-16 10-16.5

12-16.5 12.5/65-18 15.5/60-18

15.5/70-18 15.5/70-20 42x17-20

17.5/65-20 16.9-24 18.4-24

This table doesn't secure to prevent the risk derived from heat buildup. The maximum excess loads will result in reduced tire performance.

REMARKS & SPECIAL OPERATIONS 81

2. Special Operations

2.1.1 For Front End Loader Service

Please check your operation to make sure of the Tire Load Limit.

For Radial Tires

Type/Service

Type of Operations

Reference No.

Standard Earthmover

Underground Shuttle Truck Service

2.1.3

When the vehicle is driven over the highway for delivery, or moved by an operator to a new job site - Drive-Away Distance of picking up and relocating material Less than 76m (one way) - Standard

Loader & Dozer

Tread Class

Inflation Pressure Rim Diameter 29" and below Conventional size (95 series) 1

2.2.1

L2, L3 L4

Load Capacity* 10km/h (5mph)

Wide base size (65 series)

Wide base size (85, 65 series)

33" and above

Maximum Cycle Distance (m)

1800 550kpa 825kpa 500kpa (80psi) (120psi) (73psi)

650kpa (94psi)

600kpa 750kpa (87psi) (109psi)

100% of STD. load

1500 (VSDT) 1500 (VSDT) 1200

L5S

Distance of picking up and relocating material More than 76m (one way) - Load-and-Carry Operations

2.1.1

Underground Load Haul Dump Service

2.1.2

Underground Shuttle Truck Service

2.1.3

When the vehicle is driven over the highway for delivery, or moved by an operator to a new job site - Drive-Away

2.2.2

2.1 For Load-and-Carry Operations Service conditions of a loader is defined as “picking up material and relocating a short distance away, a maximum of 76m (250 feet), one way, with a maximum speed of 10km/h (5 mph)”. However, a loader can pick up a load and transport such load to another location and return unloaded for a longer distance. This type of service is called as Load-and-Carry operations. Transportation usually occurs at low speeds, up to 25km/h (15 mph), and distances are limited. The tires when used in Load-and-Carry operations may encounter heat problems especially on the front axle tires. To avoid such problems, Bridgestone recommends the following operating conditions. For tires over 33" inch rim diameter tires, careful study is required to maximize tire life while considering TonKilometer-Per-Hour limits. Please consult a Bridgestone representative for more information. If you need to use the tire beyond this recommendation, please consult a Bridgestone representative.

Allowable Average Work-shift Speed (km/h)

16 14 10 6 5

*STD.load: Maximum permissible load at standard inflation pressure for respective tire size and star rating. Please refer to the load - inflation pressure table for loader and dozer service “10km/h (5mph) service” .

For Bias Tires Tread Class

Inflation Pressure for Front Tires

L2, L3 L4 L5 L5S

Standard inflation pressure + 100kpa (15psi)

Load Capacity* 10km/h (5mph)

Maximum Cycle Distance (m)

Allowable Average Work-shift Speed (km/h)

85% of STD. load

1200 500

300

Rim Diameter 29" and below 32" and above 90% of STD. load

* STD.load: Maximum permissible load at standard inflation pressure for respective tire size and star rating. Please refer to the load - inflation pressure table for loader and dozer service “10km/h (5mph) service”. ** Not permissible The inflation pressure should not exceed 825kPa (120psi).

2.1.2 For Load Haul Dump Service Since a load haul dump (LHD) unit has a similar structure and operational characteristics as load and carry service on a front end loader, the following operating parameters are recommended.

For Radial Tires Inflation Pressure Tread Class

Earthmover Articulated Dump Truck

Earthmover & Loader Shuttle Truck

Wide base size (85, 65 series)

Load Capacity* 10km/h (5mph)

Front End Loader

825kpa (120psi)

under ground

650kpa (94psi)

90% of STD. load

L5S

High Standard

Speed Load

Low Severe

Maximum Cycle Distance (m)

Allowable Average Work-shift Speed (km/h)

1800 1500 (VSDT) 1200 (VSDL) 1200

14 10 6 5

2 D2A **

L2, L3 L4

Loader LHD

Conventional size (95 series)

*See note in Table 2.1.1. **Not permissible 100% of STD. load is applicable to the following sizes on the list.

29.5R29 2, 35/65R33 2

For Bias Tires Tread Class

Inflation Pressure for Front Tires

L2, L3 L4 L5 L5S

Standard inflation pressure + 100kpa (15psi)

Load Capacity* 10km/h (5mph) Rim Diameter 29" and below 32" and above

Maximum Cycle Distance (m)

Allowable Average Work-shift Speed (km/h)

** 90% of STD. load

85% of STD. load

500 300

*See note in Table 2.1.1. **Not permissible The inflation pressure must meet 1.1 for maximum excess load.

REMARKS & SPECIAL OPERATIONS 83

2.1.3 For Shuttle Truck Service Shuttle truck service is defined as small and low vehicle height dump truck used in underground mines. However, the application is considered to be similar to load and carry operation which has relatively slower speed and shorter distance with more load than normal dump truck use. Consequently, the severity to the tire is estimated using the load and carry concept. Bridgestone defines the recommendation in this section.

b. Stop for a 30-minute cooling period after each 80 km (50 miles) of driving or before 2 hours of continual operation, whichever comes first. (shown in the following figure) c. One-hour minimum midday lunch stop should be observed during full day operations. (shown in the following figure)

Drive-Away STOP 0.5 hr.

For Radial Tires Speed Tread Class & Pattern

Wide base size (85, 65 series) 25" – 33"

L3 L4 L5 L5S

Conventional size (95 series) 25" – 35"

VMT VSNT VSDT VSDL VSMS VELS VMTP VRLS

Inflation Pressure

650 kpa (94psi)

2 D2A

Load Capacity* 10km/h (5mph)

90% of STD. load

Maximum Speed (km/h)

Allowable Average Work-shift Speed (km/h)

16 14 10 6 5

2 Hrs. or 80 km (50 miles)

STOP 0.5 hr.

2 Hrs. or 80 km (50 miles)

[2] Vehicles in transit should be accompanied by responsible personnel in a pilot car to enforce these precautions and maintain a check on equipment. This is good insurance for a valuable investment.

2.2.2 Off-the-Road Tires for Loader & Dozer During or after the operation, please wait for the following hours prior to start Drive-Away.

700 kpa (102psi)

2 E2A

115% of STD. load

14 Size & Pattern

Load per tire [ton]

45/65R45 VSDL

30.3

50/65R51 VSDL

40.3

2.2 Drive-Away Tires on Vehicles

555/80R57 VSDL

64.8

2.2.1 Off-the-Road Tires for Earthmover

60/80R57 VSDL

69.5

(1) Recommendations for Off-the-Road Tires

65/65-57 DL

64.8

*See note in 2.1.1. For over Maximum Speed, consult a Bridgestone Representative. 29.5R29 2, 35/65R33 2 100% of STD. load is applicable to the following sizes on the list.

For Bias Tires Not recommendable.

Because of the special extra-heavy construction of Off-the-Road tires, special precautions must be observed to protect these expensive tires when the vehicle is driven over the highway for delivery, or moved by an operator to a new job site. If the precautions are not observed, excessive tire heat is built up and the tires most likely will fail prematurely. These precautions are as follows and apply to tires on all vehicles in transit—driven or towed. Consult a Bridgestone Representative for specific information before starting out on a drive-away trip.

(2) Load and Pressure

Maximum Travel Distance (One way)

Rest time prior to traveling (Hour)

5 km or 3.1 Mil

10 km or 6.2 Mil

Maximum speed on traveling Rest time prior to traveling (Hour)

1.5

Rest time prior to traveling (Hour)

3.5

10 km/h or 6.2 MPH 7

20 km/h or 12.4 MPH 1

Maximum speed on traveling Maximum speed on traveling

60 km or 37 Mil

20 km/h or 12.4 MPH

Maximum speed on traveling Rest time prior to traveling (Hour)

50 km or 31 Mil

10 km/h or 6.2 MPH

Maximum speed on traveling Rest time prior to traveling (Hour)

20 km or 12.4 Mil

10 km/h or 6.2 MPH 4

10 km/h or 6.2 MPH 3

6.5

20 km/h or 12.4 MPH

10 10 km/h or 6.2 MPH

*Please consult a Bridgestone representative. Remarks; 1. Time for cooling temperature of the tire (Parked up the loader) should be applied prior to start to travel on the road. 2. Ambient temperature of 38˚C or 100˚F is assumed. 3. Maximum load on tire should be less than the Load per tire in the above table. 4. Air pressure for “Drive-Away” should be the same as our recommended figures, and need to confirm whether it would not be higher figures that we experienced prior to travel. 5. We recommend that it would be best way for Giant loaders to use tow hauler for long way traveling. The drive away distance should be shorter than 60km (37 miles) within 20 km/h as the maximum speed to minimize the risk of tire heat damage. 6. If you have a plan of Drive-Away, please consult a Bridgestone representative.

[1] Vehicles must be empty during transportation. [2] Inflation pressure is to be checked before starting, each break and adjusted to the pressure recommended for over-the-highway transit by Bridgestone. [3] Inflation pressures are not to be reduced by “bleeding” tires during transportation. [4] Periodical inflation pressure checks during transportation (i.e. every 2 hours) is recommended. Although operational pressure build-up in tires is normal during transportation, when it increases 20% or more than the cold pressure reading, it indicates over heating, and the vehicle should be stopped and a Bridgestone Representative should be consulted.

(3)Speed [1] Regular tread tires (E-3): (Note: For deep tread tires (E-4), always consult a Bridgestone Representative.)

a. Maximum highway speed:

Maximum Speed (Drive-Away) Maximum Speed Radial / Bias

Regular

50 km/h

30 mph

Wide Base

32 km/h

20 mph

REMARKS & SPECIAL OPERATIONS 85

OTHER SPECIFICATION 1. O-Ring Specifications Code No.

Applicable Size Radial

13.00R24 TG 14.00R24 TG 16.00R24 TG P-25AX 14.00R25* 15.5R25 17.5R25 20.5R25 29.5R25 385/95R25 445/80R25 445/95R25 14.00R25** P-25B 16.00R25 17.5R25 18.00R25 20.5R25 21.00R25 23.5R25 25/65R25 26.5R25 29.5R25 30/65R25(750/65R25) 385/95R25 445/80R25 445/95R25 505/95R25 525/80R25 550/65R25 600/65R25 650/65R25 750/65R25 29.5R29 P-29B 33.25R29 775/65R29 875/65R29

P-24A

Diameter

3. Rim and Valve Inner Circumference

inch

Code No.

Bias

inch

13.00-24 TG 14.00-24 TG 15.5-25 17.5-25 20.5-25 16.00-25 17.5-25 18.00-25 20.5-25 21.00-25 23.5-25 26.5-25 29.5-25 29.5-29 -

6.6

0.26

1768 69.61

P-33B

6.8

0.27

1779 70.04

P-35B

P-39B

9.8

0.39

1779 70.04

P-45B P-49B

P-51C

P-57C

P-63C 9.8

0.39

Applicable Size Radial 18.00R33 21.00R33 35/65R33 21.00R35 24.00R35 29.5R35 33.25R35 37.25R35 37.5R39 40.5/75R39 45/65R39 45/65R45 24.00R49 27.00R49 31/90R49 30.00R51 33.00R51 36.00R51 50/65R51 37.00R57 40.00R57 42/90R57 46/90R57 50/90R57 55.5/80R57 60/80R57 53/80R63 59/80R63

Diameter

Inner Circumference

Bias

inch

18.00-33 35/65-33 21.00-35 37.25-35 40/65-39 41.25/70-39 45/65-45 50/65-51 65/65-57 -

9.8

0.39

2382

93.78

9.8

0.39

2572 101.26

9.8

0.39

2900 114.17

9.8 9.8

0.39 0.39

3326 130.94 3611 142.17

12.7

0.5

3694 145.43

12.7

0.5

4129 162.56

Rim Width Rim Flange 12.7

2127 83.74

0.5

4580 180.31

Rim Flange

Lock Ring

2. Flap Specifications Flap 550/600-15 650/700/750-15 12/65B-15 750/825AR15 750/825-R16 200D1000-R15 700A825-R20 900A111-R20 1100B13/80-R20 1400/14/80R20 1300A1600-20 42x17-20 14/70-20 1300-24 1200A1400-24,25 1100B1300-R24 1300/1400-24,25 1400/1600R24,25 1600-24,25 155A1800-24,25 235-25 265-25 2100R33

Bead-Seat Band

Rim Base

* For Rim Size 10.00-25 ** For Rim Size 11.25-25

Locking Key (part of lock ring)

Bead Seat

inch

1175 1177 1196 1201 1255 1201 1255 1201 1594 1594 1618 1576 1587 1916 1942 1922 1942 1942 1916 1926 1934 2010 2553

46.3 46.3 47.1 47.3 49.4 47.3 49.4 47.3 62.8 62.8 63.7 62.1 62.5 75.4 76.5 75.7 76.5 76.5 75.4 75.8 76.1 79.1 100.5

4.0 4.5 7.0 6.0 5.0 6.5 5.0 6.0 6.5 8.5 8.0 9.0 9.0 9.0 9.0 7.5 9.0 9.0 9.0 6.0 9.0 12.0 9.0

0.16 0.18 0.28 0.24 0.20 0.26 0.20 0.24 0.26 0.33 0.31 0.35 0.35 0.35 0.35 0.30 0.35 0.35 0.35 0.24 0.35 0.47 0.35

129 169 270 184 174 205 180 205 218 240 246 390 331 229 232 220 232 260 293 340 560 570 413

5.1 6.7 10.6 7.2 6.9 8.1 7.1 8.1 8.6 9.4 9.7 15.4 13.0 9.0 9.1 8.7 9.1 10.2 11.5 13.4 22.1 22.4 16.3

Nominal Diameter

Valve-Stem Support

Valve Hole

O-Ring

8.50V

P G1

Nominal Diameter of Rim (inches) Flange Type Rim Width (inches) Flap

OTHER SPECIFICATION 87

3.1 Rim Designation Full Tapered Bead Seat Rims (5 pieces) A

11.00/1.5 11.25/2.0 13.00/2.5

15.00/3.0

17.00/2.0 17.00/3.5 18.00/1.5 19.50/2.5

19.50/4.0 20.00/2.0 22.00/3.0 22.00/4.5 24.00/3.0 24.00/3.5 24.00/5.0 25.00/3.5

26.00/5.0 27.00/3.5

27.00/6.0 28.00/3.5 29.00/6.0 31.00/4.0 32.00/4.0 32.00/4.5

32.00/6.5 34.00/6.5 36.00/4.5 36.00/5.0 40.00/4.5 41.00/5.0 44.00/5.0 44.00/6.0 47.00/6.0 52.00/6.0

Tire Size Radial 14.5R15 16.00R25 445/95R25(16.00R25) 18.00R25 505/95R25(18.00R25) 18.00R33 21.00R25 21.00R33 21.00R35 550/65R25 600/65R25 24.00R35 24.00R49 24R21 23.5R25 600/65R25 650/65R25 27.00R49 31/90R49 25/65R25 750/65R25(30/65R25) 26.5R25 30.00R51 750/65R25(30/65R25) 775/65R29 33.00R51 29.5R25 775/65R29 29.5R29 29.5R35 36.00R51 875/65R29 33.25R29 33.25R35 37.00R57 42/90R57 875/65R29 35/65R33 40.00R57 46/90R57 37.25R35 37.5R39 40.5/75R39 45/65R39 50/90R57 50/90R57 45/65R39 45/65R45 53/80R63 50/65R51 59/80R63 59/80R63 55.5/80R57 60/80R57 -

Bias 16.00-25 18.00-25 18.00-33 21.00-25 21.00-35 24.00-35 23.5-25 26.5-25 29.5-25 29.5-29 35/65-33 37.25-35 40/65-39 41.25/70-39 45/65-45 50/65-51 65/65-57

Flat Base Rims

Recommended Rim/ Flange Height

Semi Drop Center Rims (SDC)

Full Tapered Bead Seat Rims (3 pieces)

Tire Size

Recommended Rim/ Flange Height

Radial

10.00/1.5

Bias

14.00R25 385/95R25(14.00R25) 15.5R25 12.00/1.3 17.5R25 14.00/1.5 445/80R25(17.5R25) 550/65R25 550/65R25 17.00/2.0 17.00AL/1.7( 1only) 20.5R25 17.00/1.7 600/65R25 20.5R25 17.00/2.0 525/80R25(20.5R25)

14.00-25 15.5-25 17.5-25 20.5-25 20.5-25 -

Recommended Rim/ Flange Height

Tire Size Radial 13.00R24 TG 14.00R24 TG 16.00R24 TG 335/80R20 365/80R20 405/70R20 -

6.00GS 8.00TG 10.00F 10.00VA

11x20 11.00TG 13x20 14.00TG

Bias

6.50T

7.50-15 7.50-16 14.00-24 TG 33x12.5-15 13.00-24 TG 14.00-24 TG 16.00-24 TG 14/70-20 42x17-20

7.00T 7.50V

8.00V 8.5 8.50V 9.00 9.00V 10.00WI 10.00W

Drop Center Rims (DC, W, DW) C

11LB 6LB 8LB 10LB 8.25 9.75 W13 W14L W15L DW20B DW27B

Radial

Bias

8.25R15 9.00R20 10.00R15 11.00R20 12.00R20 12.00R24 12R22.5 14.00R20 16.00R20 14.00R24 385/95R24(14.00R24) 385/95R25(14.00R25)

8.25-20 9.00-20 10.00-20 14.00-20 11.00-20 12.00-24 12.00-20 12.00-24 14.00-24 14.00-24 -

Tire Size

Recommended Rim/ Flange Height 5JA 4.50E 5.1/2K 5.50F 7JA

Tire Size

Recommended Rim/ Flange Height

Radial -

Bias 23x8.50-12 5.50-15 9.00-15 9.00-15 23x8.50-12 27x8.50-15 9.5/65-15 14.0/65-15 7.50-16 10.5/80-16 12.5/70-16 10-16.5 12-16.5 15.5/70-18 15.5/70-20 17.5/65-20 16.9-24 18.4-24 23.1-26 30.5L-32

OTHER SPECIFICATION 89

Interchangeable Swivel Valves For Tubeless Or Tube Type Tires

3.2 Valve Types

Large Bore Valves

TRJ4000-4 1/2

Tube Valve and Rim Section

Dimensions (mm) F˚ A B TRJ650 27.5 79.5 80˚ TRJ4000-4 1/2 31 114.0 90˚ TRJ4000-8 31 203.0 90˚ TRJ4000-7 1/2 31 190.5 90˚

Valve No.

F˚ Tube Flap A

This type of VALVE consists of a combination of the rubber base SP-4000 or SP-2.

Tube Type Spud

Tubeless Type Spud

SP4000

SP2

28mm

Tube Valve

Tubeless Valve and Rim Section

9.5mm Inner Liner

ø114mm

Tube Type Rubber Base Valves TR218

B Rim Valve

Valve No.

9.5mm

Dimensions (mm) A

TR218A

20.6

11.1

TR220A

30.2

20.7

Tube Valve ø63.5mm

PV-7 86˚

Tubeless Valve

Valve No. PV-7

Dimensions (mm) A

D dia.

100

D dia.

OTHER SPECIFICATION 91

Tube Type Rubber Covered Valves JS75

Dimensions (mm) F˚ A B

Valve No. B

JS75 TR76A TR77A TR77E TR78A TR175A TR177A JS177B JS179 JS179A TR179A PV38 PV89 V3-02-3 V3-02-15

F˚± 2˚ A

ø95mm

24 70 24 86 24 105 35 94 24 127 24 115 24 95 28 91 36 133 29 137 24 141 24 136 42.8 123 35.8 44.5 23.3 145.5

TR13 E

82˚ 86˚ 86˚ 86˚ 86˚ 86˚ 86˚ 86˚ 86˚ 86˚ 86˚ 80˚ 86˚ 85˚ 86˚

38mm Valve No.

Dimensions (mm)

E 11.5 16.5

TR13 TR15

ø56mm

Tube Type Screw-on Valves PV88 B

D G˚

JSJ1175

90˚

F˚

B A

F˚± 2˚

Large Bore Valves

Valve No. JSJ1078S JSJ1175 JSJ1175B JSJ1175C

Dimensions (mm) A B D dia. F˚ 30 35 35 35

121 105 105 102

32 32 32 32

Valve No.

84˚ 88˚ 80˚ 60˚

D dia.

V3-06-2 V3-06-5 PV88 PV118

ø95mm

TR150CW

Dimensions (mm) B C D F˚

23.3 44.5 23.3 62.5 26.3 80.5 35.4 130.0

20.8 25.9 47.0 84.0

37.5 49.0 54.5 –

55˚ 41˚ 30˚ 10˚

G˚ 55˚ 41˚ 30˚ –

ø15.5mm

JS2

F˚ 88.5mm

A Valve No. JS2

Valves, TR150 and TR150CW, are also called Hand Bendable Valves, that is, their stems are made of very flexible material permitting manual bending in all directions and to any angle.

Dimensions (mm) F˚ A B 26

70˚

ø57mm

OTHER SPECIFICATION 93

OTHER INFORMATION 1. Unit Conversion Tables TEMPERATURE

INFLATION PRESSURE 2

kg/cm

psi

kPa

bar

kg/cm

psi

kPa

bar

kg/cm

0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5

1 3 4 6 7 9 10 11 13 14 16 17 18 20 21 23 24 26 27 28 30 31 33 34 36

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250

0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5

2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0

37 38 40 41 43 44 45 47 48 50 51 53 54 55 57 58 60 61 62 64 65 67 68 70 71

250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490

2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9

5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5

psi 72 74 75 77 78 80 81 82 84 85 87 88 89 91 92 94 95 97 98 99 101 102 104 105 107

kPa

bar

kg/cm

490 500 510 520 530 540 550 560 570 580 590 600 610 620 630 640 650 660 670 680 690 700 710 720 730

4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3

7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0

psi 108 109 111 112 114 115 116 118 119 121 122 124 125 126 128 129 131 132 133 135 136 138 139 141 142

kPa

bar

°C

740 750 760 770 780 790 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 970 980

7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8

-19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10

WEIGHT FROM POUND TO KILOGRAM

FROM KILOGRAM TO POUND

1 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 220 240

0.5 4.5 9.1 13.6 18.1 22.7 27.2 31.8 36.3 40.8 45.4 49.9 54.4 59.0 63.5 68.0 72.6 77.1 81.6 86.2 90.7 99.8 108.9

260 280 300 320 340 360 380 400 420 440 460 480 500 520 540 560 580 600 700 800 900 1000 1100

117.9 120.0 136.1 145.2 154.2 163.3 172.4 181.4 190.5 199.6 208.7 217.7 226.8 235.9 244.9 254.0 263.1 272.2 317.5 362.9 408.2 453.6 499.0

1200 1300 1400 1500 1600 1700 1800 1900 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4600 4800

544.3 589.7 635.0 680.4 725.8 771.1 816.5 861.8 907.2 997.9 1088.6 1179.4 1270.1 1360.8 1451.5 1542.2 1633.0 1723.7 1814.4 1905.1 1995.8 2086.6 2177.3

5000 5200 5400 5600 5800 6000 7000 8000 9000 10000 11000 12000 13000 14000 15000 16000 17000 18000 19000 20000

2268.0 2358.7 2449.4 2540.2 2630.9 2721.6 3175.2 3628.8 4082.4 4536.0 4989.6 5443.2 5896.8 6350.4 6804.0 7257.6 7711.2 8164.8 8618.4 9072.0

1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120

2.2 11.0 22.0 33.1 44.1 55.1 66.1 77.2 88.2 99.2 110.2 121.3 132.3 143.3 154.3 165.3 176.4 187.4 198.4 209.4 220.5 242.5 264.6

130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 350 400 450 500 550

286.6 308.6 330.7 352.7 374.8 396.8 418.9 440.9 463.0 485.0 507.1 529.1 551.2 573.2 595.2 617.3 639.3 661.4 771.6 881.8 992.1 1102.3 1212.5

600 650 700 750 800 850 900 950 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400

1322.8 2500 1433.0 2600 1543.2 2700 1653.5 2800 1763.7 2900 1873.9 3000 1984.1 3500 2094.4 4000 2204.6 4500 2425.1 5000 2645.5 5500 2866.0 6000 3086.4 6500 3306.9 7000 3527.4 7500 3747.8 8000 3968.3 8500 4188.7 9000 4409.2 9500 4629.7 10000 4850.1 5070.6 5291.0

lb 5511.5 5732.0 5952.4 6173.0 6393.3 6613.8 7716.1 8818.4 9920.7 11023.0 12125.3 13227.6 14329.9 15432.2 16534.5 17636.8 18739.1 19841.4 20943.7 22046.0

°F

°C

-2.2 -0.4 1.4 3.2 5.0 6.8 8.6 10.4 12.2 14.0 15.8 17.6 19.4 21.2 23.0 24.8 26.6 28.4 30.2 32.0 33.8 35.6 37.4 39.2 41.0 42.8 44.6 46.4 48.2 50.0

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

°F

°C

51.8 53.6 55.4 57.2 59.0 60.8 62.6 64.4 66.2 68.0 69.8 71.6 73.4 75.2 77.0 78.8 80.6 82.4 84.2 86.0 87.8 89.6 91.4 93.2 95.0 96.8 98.6 100.4 102.2 104.0

°F

41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

105.8 107.6 109.4 111.2 113.0 114.8 116.6 118.4 120.2 122.0 123.8 125.6 127.4 129.2 131.0 132.8 134.6 136.4 138.2 140.0 141.8 143.6 145.4 147.2 149.0 150.8 152.6 154.4 156.2 158.0

°C

71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

°F

°C

°F

°C

159.8 161.6 163.4 165.2 167.0 168.8 170.6 172.4 174.2 176.0 177.8 179.6 181.4 183.2 185.0 186.8 188.6 190.4 192.2 194.0 195.8 197.6 199.4 201.2 203.0 204.8 206.6 208.4 210.2 212.0

101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130

213.8 215.6 217.4 219.2 221.0 222.8 224.6 226.4 228.2 230.0 231.8 233.6 235.4 237.2 239.0 240.8 242.6 244.4 246.2 248.0 249.8 251.6 253.4 255.2 257.0 258.8 260.6 262.4 264.2 266.0

°F

131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 160 170 180 190 200

267.8 269.6 271.4 273.2 275.0 276.8 278.6 280.4 282.2 284.0 285.8 287.6 289.4 291.2 293.0 294.8 296.6 298.4 300.2 302.0 320.0 338.0 356.0 374.0 392.0

TREAD DEPTH CONVERSION TABLE FROM INCH TO MILIMETER

inch/32 mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.1 8.0 8.7 9.5 10.3 11.1 11.9 12.7 13.5 14.3 15.1 15.9

inch/32 mm 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

16.7 17.5 18.3 19.1 19.8 20.6 21.4 22.2 23.0 23.8 24.6 25.4 26.2 27.0 27.8 28.6 29.4 30.2 31.0 31.8

FROM MILIMETER TO INCH

inch/32

41 42 43 44 45 46 47 48 49 50 55 60 65 70 75 80 85 90 95 100

32.5 33.3 34.1 34.9 35.7 36.5 37.3 38.1 38.9 39.7 43.7 47.6 51.6 55.6 59.5 63.5 67.5 71.4 75.4 79.4

105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200

83.3 87.3 91.3 95.3 99.2 103.2 107.2 111.1 115.1 119.1 123.0 127.0 131.0 134.9 138.9 142.9 146.9 150.8 154.8 158.8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

1.3 2.5 3.8 5.0 6.3 7.6 8.8 10.1 11.3 12.6 13.9 15.1 16.4 17.6 18.9 20.2 21.4 22.7

mm inch/32 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

23.9 25.2 26.5 27.7 29.0 30.2 31.5 32.8 34.0 35.3 36.5 37.8 39.1 40.3 41.6 42.8 44.1 45.4

inch/32

37 38 39 40 41 42 43 44 45 46 47 48 49 50 55 60 65 70

46.6 47.9 49.1 50.4 51.7 52.1 54.2 55.4 56.7 58.0 59.2 60.5 61.7 63.0 69.3 75.6 81.9 88.2

75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150

95.5 100.8 107.1 113.4 119.7 126.0 132.3 138.6 144.9 151.2 157.5 163.8 170.1 176.4 182.7 189.0

OTHER INFORMATION 95

PRESSURE

2. Specific Weight (Approximately)

kg/cm2

kPa

bar

psi

kg/cm2

98.07

0.9807

14.22

kPa bar

0.0102

0.01

0.1450

1.020

100

14.503

psi

0.0703

6.895

0.06895

Material

LENGTH m.meter c.meter meter k.meter inch foot yard mile

m.meter

c.meter

meter

k.meter

inch

foot

yard

0.10000

0.00100

0.03937

0.00328

0.00109

10.0000

0.01000

0.00001

0.39371

0.03281

0.01094

1000.00

100.00

0.00100

39.3707

3.28089

1.09363

0.00062

100000

1000.00

39370.7

3280.89

1093.63

0.62138

25.3995

2.53995

0.02540

0.00003

0.08333

0.02778

0.00002

304.794

30.4794

0.30479

0.00030

12.0000

0.33333

0.00019

914.383

91.4383

0.91438

0.00091

36.0000

3.00000

0.00057

160931

1609.31

1.60931

63360.0

5280.00

1760.00

hectare

k.meter2

foot2

yard2

acre

mile2

mile

Pounds/cu.yd

Metric Tons/m3

Anthracite 2000 1.2 Basalt 3400 2.0 Bauxite 2400 1.4 Clay: dry 2500 1.5 wet 2900 1.7 Coal 1200 0.7 Copper ore 2700 1.6 Crushed gypsum 2700 1.6 Earth: dry 2500 1.5 wet 2700 1.6 Granite 2900 1.7 Gravel: dry 2900 1.7 wet 3400 2.0 Note: Weight of materials varies with moisture content, grain exact weight.

Material

Pounds/cu.yd

Metric Tons/m3

Iron ore: Magnetite 4700 2.8 Limestone 2500 1.5 Pyrites 4400 2.6 Over-Burden 75%rock-25%earth 3400 2.0 50%rock-50%earth 2900 1.7 25%rock-75%earth 2700 1.6 Sand: dry 2400 1.4 wet 3000 1.8 Sandstone 2500 1.5 Snow: dry 170 0.1 wet 840 0.5 Uranium 2700 1.6 size, degree of compaction, etc. Test must be made to know

AREA meter2

are

meter are hectare k.meter2 foot2 yard2 acre mile2

0.010000

0.000100

0.000001

10.7639

1.19600

0.000247

0.000000

100.000

0.010000

0.000100

1076.39

119.600

0.024710

0.000039

10000.0

100.000

0.010000

107639.0

11960.0

2.47105

0.003861

10000.0

100.000

247.105

0.386098

0.092903

0.000929

0.000009

0.000000

0.111111

0.000023

0.000000

0.836130

0.008361

0.000084

0.000000

9.00000

0.000207

0.00000

4046.87

40.4687

0.404687

0.004047

43560.2

4840.00

0.001562

25900.2

259.002

2.59002

640.000

gram

k.gram

ton

s.ton

l.ton

ounce

pound

0.00100

0.03527

0.00220

1000.00

0.00100

0.00110

0.00098

35.2739

2.20462

1000.00

1.10230

0.98421

35273.9

2204.62

907185

907.185

0.90719

0.89286

32000.0

2000.00

1016.04

1.01604

1.12000

35840.0

2240.00

28.3495

0.02835

0.00003

0.06250

453.592

0.45359

0.00045

0.00050

0.00045

16.0000

cub.meter

liter

cub.inch

cub.foot

cub.yard

U.S.gallon

U.K.gallon

1000.00

61027.1

35.3147

1.30802

264.186

220.216

0.00100

61.0271

0.03532

0.00131

0.26419

0.22022

WEIGHT gram k.gram ton s.ton l.ton ounce pound

CAPACITY cub.meter liter cub.inch cub.foot cub.yard U.S.gallon U.K.gallon

0.00002

0.01639

0.00058

0.00002

0.00433

0.00361

0.02832

28.3167

1728.00

0.03704

7.48051

6.23549

0.76455

764.554

46656.0

27.0000

201.974

168.358

0.00379

3.78543

231.000

0.13368

0.00495

0.83270

0.00455

4.54596

277.413

0.16037

0.00594

1.20091

FORCE 1 kgf

9.81 N

POWER (horse power)

1 hp

550 ft * lbf/s

745.7 W

1 PS

75 m * kgf/s

735.5 W

OTHER INFORMATION 97

MEMO