WEST COAST PRODUCT CATALOG VOLUME 01
WE JUST REDUCED YOUR SHIPPING COSTS. p 800.321.1130 • F 480.214.0081 • ACTION-IND.COM
TABLE OF CONTENTS:
OUR LOCATIONS WE’VE GOT YOU COVERED.
7815 South Hardy Drive, SUITE 109 • Tempe, AZ 85284 • ACTION-IND.COM P 800.321.1130 or 480.422.3051 • F 888.329.7880 or 480.214.0081
TABLE OF CONTENTS:
TABLE OF CONTENTS STANDARD SEALS:
THRESHOLDS:
04 STANDARD ALUMINUM RETAINERS
16 STORM SHIELD® GARAGE DOOR THRESHOLD
05 STANDARD BRUSH SEALS
17 EXCALIBURTM
05 STANDARD VINYL SEALS 05 STANDARD RUBBER SEALS
MATERIAL HANDLING:
06 STANDARD FLEXIBLE BRUSH SEALS
18 DOCK LEVELER SEALS
SLIM-LINE SEALS: 07 SLIM-LINE ALUMINUM RETAINERS
19 WHEEL CHOCKS 19 LAMINATED DOCK BUMPERS
07 SLIM-LINE VINYL SEALS
STRIP DOOR:
07 SLIM-LINE BRUSH SEALS
20 RIP-A-STRIP
LARGE SEALS:
20 CUSTOM STRIP DOORS
08 LARGE ALUMINUM RETAINERS
ACCESSORIES:
09 LARGE BRUSH SEALS
21 LUBRICANT
09 LARGER RUBBER SEAL
21 PNEUMATIC SAFETY EDGE
BOTTOM & TOP SEALS:
21 COIL CORDS
10 ALUMINUM BOTTOM SEAL RETAINERS
Hardware:
10 PLASTIC BOTTOM SEAL RETAINERS
22 HINGES
11 SHIP-LAP/TONGUE-AND-GROOVE ADAPTERS
23 ROLLERS
11 PLASTIC VINYL BOTTOM SEAL
23 SLIDE LOCKS
11 FLEXIBLE TOP SEAL
23 BEARINGS & SHAFT COLLARS
12 BOTTOM “T” RUBBER SEALS
24 DRUMS
12 BOTTOM “T” VINYL SEALS
24 UNIVERSAL SPRING CONES
13 ROLLING STEEL DOOR BOTTOM SEAL
25 BOTTOM BRACKETS
13 BOTTOM “T” BULB VINYL SEALS
25 JAMB BRACKETS
13 WOOD DOOR BOTTOM NAIL-ON SEALS
25 SHEAVES & STRAPS
JAMB SEALS:
26 TERMS & CONDITIONS
14 STANDARD ROLLING STEEL DOOR CLIP-ON GUIDE SEAL 14 FLEXIBLE VINYL REVERSE ANGLE JAMB SEALS 15 FLEXIBLE TPR REVERSE ANGLE JAMB SEALS 15 RIGID VINYL REVERSE ANGLE JAMB SEALS P 800.321.1130 • F 480.214.0081 • action-ind.com •
03
STANDARD SEALS
STANDARD ALUMINUM RETAINERS
Made of high-strength aluminum ore and designed to hold any ½” to 3” brush or vinyl seal from our Standard Line. STANDARD LENGTHS: 8’-2”, 9’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2” PART NUMBER A0083-MI-W
COLOR
Mill
A0086-MI-W
Mill
A0288-MI-W
Mill
A0282-MI-W
Mill
A0084-MI-W
Mill
A0088-MI-W
Mill
A0082-MI-W
Mill
A0087-MI-W
Mill
A0085-MI-W
Mill
STANDARD SEALS
A0083
0-299’ 2” OFFSET $1.26 3” OFFSET $1.65 2” STR $0.88 2” 45º $0.86 2” OFFSET $0.77 1” STR $0.65 1” 45º $0.65 1” 90º $0.65 1” R 45º $0.66
300-899’
A0086
900-1999’
2000’
$1.13
$1.05
$0.93
$1.51
$1.38
$1.23
$0.81
$0.73
$0.66
$0.79
$0.71
$0.64
$0.71
$0.66
$0.61
$0.59
$0.55
$0.51
$0.61
$0.57
$0.53
$0.59
$0.55
$0.51
$0.59
$0.55
$0.51
A0288
A0282
1 7/8”
2 15/16”
1 7/8”
1 5/8”
2 5/16”
3 5/16”
2 1/8”
2”
A0084
A0082
A0088
1 5/16”
7/8”
1 5/8”
1 1/4”
04 • action-ind.com • P 800.321.1130 • F 480.214.0081
A0087 13/16”
1 1/8”
1 5/16” 1 1/4”
A0085
11/16”
STANDARD SEALS
STANDARD BRUSH SEALS
Our Standard Brush Seals are made of versatile and long-lasting filaments that will not hold water or freeze at sub-zero temperatures. Bristles are wrapped around a steel rod to prevent “pull-out.” Standard Brush Seals fit all Standard Aluminum Retainers (see page 4) or Standard Rolling Steel Clip-On Retainers (see page 14). Standard lengths: 6’, 7’, 8’, 9’, 10’ PART NUMBER
BRISTLE
B0772-00-W B0771-00-W B0769-00-W B0768-00-W
0-299’
3” 2” 1 1/2” 1”
300-899’
$2.44 $2.18 $1.89 $1.73
900-1999’
$2.19 $1.96 $1.71 $1.56
2000’ 2000’
$1.96 $1.76 $1.54 $1.42
$1.75 $1.56 $1.39 $1.26
STANDARD VINYL SEALS
These seals possess excellent memory for shape retention under various conditions at a reasonable cost. Designed to fit in our Standard Aluminum Retainers (see page 4) or Standard Rolling Steel Clip-On Retainers (see page 14). AVAILABLE IN ROLLS OR INSTALLED PART NUMBER
COLOR
V0021-GR-W V0023-WH-W V0024-BL-W
Grey White Black
V0031-GR-W V0033-WH-W V0034-BL-W
Grey White Black
V0041-GR-W V0043-WH-W V0044-BL-W
Grey White Black
0-299’ 300-899’ 1” (available in 750’ rolls) $0.37 $0.33 $0.37 $0.33 $0.37 $0.33 1 3/8” (available in 500’ rolls) $0.42 $0.39 $0.42 $0.39 $0.42 $0.39 2” (available in 400’ rolls) $0.45 $0.42 $0.45 $0.42 $0.45 $0.42
2000’
900-1999’
$0.31 $0.31 $0.31
$0.29 $0.29 $0.29
$0.36 $0.36 $0.36
$0.32 $0.32 $0.32
$0.40 $0.40 $0.40
$0.37 $0.37 $0.37
STANDARD RUBBER SEALS
Designed for applications where extreme temperature changes (-50o – 350oF) may occur. AVAILABLE IN 100’ ROLLS OR INSTALLED PART NUMBER V0036-00-W V0056-00-W
DESCRIPTION
0-299’
1 3/8” Black 2 1/2” Black
$0.65 $0.72
300-899’
$0.55 $0.64
2000’ 2000’
900-1999’
$0.51 $0.58
$0.45 $0.54
P 800.321.1130 • F 480.214.0081 • action-ind.com •
05
STANDARD FLEXIBLE BRUSH SEALS
Like our Standard Brush offering, Action’s Flexible Brush Seals are made of versatile and long-lasting filaments that will not hold water or freeze at sub-zero temperatures. The flexible backing, fused with bristles, fits all of Action’s Standard Aluminum Retainers (see page 4) or Standard Rolling Steel Clip-On Retainers (see page 14). PART NUMBER B0768-PP-W B0769-PP-W B0771-PP-W B0772-PP-W
DESCRIPTION 1” Standard Polypropylene Brush 1 1/2” Standard Polypropylene Brush 2” Standard Polypropylene Brush 3” Standard Polypropylene Brush
REEL PRICE
*BULK PRICE
$238.00 $266.00 $294.00 $330.00
$208.00 $234.00 $258.00 $290.00
*Bulk Pricing: 10+ reels **200’ per reel
DELIVERS FOR LESS. Weighing up to 40% less than metal-channel brushes and bending to fit into smaller spaces, Action’s Flexible Brush saves you significant amounts of money on shipping. LASTS LONGER. No metal means Action’s Flexible Brush will never rust. BENDS ANY WAY YOU WANT. Installation is easier than ever, and Action’s Flexible Brush works with any design. Adapts to fill your needs. Action’s Flexible Brush not only fits all standard channels; it can also be customized for unique applications. WON’T PULL OUT. The filaments of Action’s Flexible Brush are actually incorporated into the base, so they’re not going anywhere. ISN’T OVERLY SENSITIVE. Action’s Flexible Brush construction can withstand a wide range of chemicals.
STANDARD SEALS
Never gets dumped. Go green with Action’s Flexible Brush. It’s made with non-PVC, 100% recyclable materials. ALWAYS AVAILABLE. Because Action’s Flexible Brush is so easy and efficient to store, you can make your life easier and save even more on shipping by ordering extra to keep on-hand. Is just long enough. Action’s Flexible Brush is available in extensive lengths. One reel lets you cut as much as you need, reducing PNs/SKUs and eliminating scraps and splices.
06 • action-ind.com • P 800.321.1130 • F 480.214.0081
SLIM-LINE SELAS
SLIM-LINE SEALS SLIM-LINE ALUMINUM RETAINERS
Slightly smaller than our Standard Aluminum profiles, Slim-Line is an economical alternative and will accept any Slim-Line brush or vinyl. STANDARD LENGTHS: 8’-2”, 9’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2” PART NUMBER A2088-MI-W A2082-MI-W A2830-MI-W
DESCRIPTION
0-299’
7/8” STR Mill $0.46 7/8” 45º Mill $0.46 1/2” Mill $0.57
2000’
900-1999’
300-899’ $0.43 $0.43 $0.53
$0.40 $0.40 $0.48
$0.38 $0.38 $0.44
SLIM-LINE VINYL SEALS
Composed from the purest chemical combination, these seals possess excellent memory for shape retention under various conditions at a reasonable cost. Slim-Line vinyls are designed to fit in our Slim-Line Aluminum Retainers or Slim-Line Clip-On Retainers (see page 14). PART NUMBER V2021-GR-W V2023-WH-W
DESCRIPTION 1” Grey 1” White
0-299’ $0.32 $0.32
$0.30 $0.30
2000’
900-1999’
300-899’
$0.28 $0.28
$0.25 $0.25
SLIM-LINE BRUSH SEALS
Comparable to our Standard Brush Line, but with a smaller profile. The brush filaments do not hold water and will not freeze at sub-zero temperatures, and make an excellent seal for irregular surfaces. Slim-Line brushes coordinate with any of our Slim-Line Aluminum Retainers or Slim-Line Plastic Clip-On Retainers (see page 14). STANDARD LENGTHS: 6’, 7’, 8’, 9’, 10’ PART NUMBER B2771-00-W B2769-00-W B2768-00-W B2767-00-W
BRISTLE 2” 1 1/2” 1” 3/4”
0-299’ $1.26 $1.08 $0.95 $0.84
300-899’ $1.14 $0.99 $0.86 $0.77
900-1999’ $1.03 $0.89 $0.78 $0.70
2000’ $0.93 $0.81 $0.71 $0.62
P 800.321.1130 • F 480.214.0081 • action-ind.com •
07
LARGE SEALS
LARGE ALUMINUM RETAINERS
For oversized applications such as rolling steel and hangar doors, or for situations where excessive gaps occur. They are designed to accommodate our dense, oversized brush seals or Large Rubber Seal. STANDARD LENGTHS: 8’-2”, 9’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2”
LARGE SEALS
PART NUMBER
COLOR
A7089-MI-W
Mill
A7092-MI-W
Mill
A7083-MI-W
Mill
A7086-MI-W
Mill
A7082-MI-W
Mill
A7087-MI-W
Mill
A7088-MI-W
Mill
A7388-MI-W
Mill
A7382-MI-W
Mill
0-299’ 5 1/2” STR $2.48 5 1/2” 45º $2.48 2” OFFSET $1.44 3” OFFSET $1.86 1” 45º $0.90 1” 90º $0.91 1” STR $0.91 3” STR $1.75 3” 45º $1.75
300-899’
2000’
900-1999’
$2.25
$2.03
$1.83
$2.25
$2.03
$1.83
$1.31
$1.18
$1.07
$1.69
$1.53
$1.39
$0.81
$0.75
$0.67
$0.82
$0.76
$0.68
$0.82
$0.76
$0.68
$1.58
$1.43
$1.27
$1.58
$1.43
$1.27
A7092
A7089
5”
5”
5 7/16”
5 1/2”
A7083
A7086
A7082
A7087
1 7/8”
2 7/8”
1”
15/16”
2 1/2”
3 1/2”
1 3/8”
1 1/2”
A7088
A7388
A7382
15/16”
2 5/8”
2 5/8”
3 1/8”
3 1/16”
1 3/8”
08 • action-ind.com • P 800.321.1130 • F 480.214.0081
LARGE SEALS
LARGE BRUSH SEALS
Oversized polypropylene brushes are designed to fit our Large-Channel Aluminum Retainers and possess the same high-quality properties as our standard brushes. STANDARD LENGTHS: 6’, 7’, 8’, 9’, 10’ PART NUMBER
BRISTLE
B3776-00-W B3775-00-W B3774-00-W
0-299’
300-899’
6” $4.82 5” $4.57 4” $4.33
2000’
900-1999’
$4.36 $4.13 $3.89
$3.93 $3.72 $3.47
$3.49 $3.31 $3.06
LARGE RUBBER SEAL
EPDM synthetic rubber insert is specially designed for applications where extreme temperatures changes (-50o – 350o F) may occur. Designed to fit any of our Large-Channel Aluminum Retainers. PART NUMBER V7066-00-W
DESCRIPTION
3” Black
0-299’
$0.90
300-899’
$0.84
2000’ 2000’
900-1999’
$0.75
$0.68
P 800.321.1130 • F 480.214.0081 • action-ind.com •
09
BOTTOM & TOP SEALS ALUMINUM BOTTOM SEAL RETAINERS
Designed as a longer-lasting, versatile retainer that will accept ¼” T-style rubber, vinyl or bulb seals. STANDARD LENGTHS: 8’-2”, 9’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2” PART NUMBER
DESCRIPTION
0-299’
A1315-00-W 1 3/8” x 1 1/2” L-Shape, Mill A1700-00-W 1 5/8” Flat, Mill A2020-01-W 2”x 2” L-Shape, Mill
300-899’
$1.50 $1.21 $1.86
900-1999’
$1.38 $1.10 $1.70
$1.26 $0.99 $1.52
2000’ $1.14 $0.92 $1.40
2”
BOTTOM & TOP SEALS
1 1/2” 1 5/8”
1 3/8”
A1700
A1315
2”
A2020
PLASTIC BOTTOM SEAL RETAINERS
Made to withstand cracking and hold their shape in temperature extremes. They are designed as economical and versatile retainers that will accept ¼” T-style rubber, vinyl or bulb seals. STANDARD LENGTHS: 8’-2”, 9’-2”, 10’-2”, 16’-2”, 18’-2” PART NUMBER
SIZE
0-299’
300-899’
P1315-BK-W 1 3/8” X 1 1/2” L-Shape, Black $0.77 P2020-BK-W 2” x 2” L-Shape, Black $0.90
$0.69 $0.81
2” 1 1/2” 1 3/8”
P1315
10 • action-ind.com • P 800.321.1130 • F 480.214.0081
2”
P2020
900-1999’
2000’
$0.63 $0.56 $0.73 $0.66
2”
2” 1 1/2”
1 1/2”
A2015-01
A2015-02
SHIP-LAP/TONGUE-AND-GROOVE ADAPTERS
Convert tongue-and-groove sections to ship-lap and ship-lap sections to tongue-and-groove. Additionally, A2015-02-W serves the dual purpose of being used as either a ship-lap adapter or as a bottom retainer. With each of these innovative accessories, you can make use of the panels available to you. STANDARD LENGTHS: 8’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2” SIZE
PART NUMBER
2” x 1 1/2” 2” x 1 1/2”
300-899’
$1.51 $2.11
2000’
900-1999’
$1.37 $1.92
$1.24 $1.75
$1.11 $1.58
BOTTOM & TOP SEALS
A2015-01-W A2015-02-W
0-299’
PLASTIC VINYL BOTTOM SEAL
All-in-one design is economical and provides easy, one-step field replacement installation with two “contact points.” STANDARD LENGTHS: 8’-2”, 10’-2”, 12’-2”, 14’-2”, 16’-2”, 18’-2” COLOR
0-299’
2” x 7/8” Black
$1.37
PART NUMBER PL206-BK-W
300-899’
2000’
900-1999’
$1.30
$1.24
$1.18
FLEXIBLE TOP SEAL
STANDARD LENGTHS: 100’ ROLLS PART NUMBER PL053-BL-W
COLOR Black
0-299’ $0.42
$0.40
2000’
900-1999’
300-899’
$0.37
$0.35
P 800.321.1130 • F 480.214.0081 • action-ind.com •
11