Sabmag50sample by SAB Magazine

Issue number 50 | winter 2015/16 | PM40024961 | $6

Regenerative Design in Practice The Vale Living with Lakes Centre

Interview: Zibi redevelopment a 'beacon' project

Beyond Lot Lines Sustainable transformation of neighbourhoods

Canadian Directory of Products and Services for Sustainable, High-Performance Building sabMag - winter 2015/16

Large and small squares, planks and skinny planks.

EM551, EM552 and EM553 in Broad

A G AT E WAY T O C R E AT I V I T Y Nature shows us how to enliven the spirit and awaken our senses from the ground up. It is the very root of creativity. Invite it inside and witness the beauty of possibility. Introducing the Equal Measureâ&#x201E;˘ Collection.

A Foundation For Beautiful Thinking. interface.com 2

sabMag - winter 2015/16

www.sabmagazine.com

Award Winner International excellence in business-to-business publishing

For more about the articles in this issue!

7-11 Industry News, Products, People 12 Regenerative Design in Practice The Vale Living with Lakes Centre

Beyond Lot Lines

Towards the Sustainable Transformation of Existing Neighbourhoods

22 Canada and the Well Standard

12 18

winter

A Path Toward Health and Wellness

2015|2016

24 P’egp’ig’lha Community Centre

Traditional building ideas create energy-efficient, unifying space

33 OUR ANNUAL CANADIAN DIRECTORY of Products and Services for Sustainable High-Performance Building

46 Interview with Rodney Wilts Zibi redevelopment a 'beacon' project

24 issuE DON’T MISS next SPRING 2016 Lunenberg County Lifestyle Centre: 100,000-square-foot building an energy miser through heat recovery and geothermal Continuing Education: Environmental Building Declarations Life-cycle analysis of whole buildings

PLUS … The LEED Buildings Year-in-Review: an overview of all projects LEED certified in 2015, a joint project with the Canada Green Building Council Luneneburg County Lifestyle Centre Cover: P’egp’ig’lha Community Centre, Urban Arts Architecture. sabMag - winter 2015/16

A better way to make ends meet.

Professionals who specify and install Uponor PEX plumbing and hydronic piping report faster installation times, savings on materials costs, fewer callbacks and greater peace of mind. Exceptional products, tools and support. Uponor. Tested in the lab and proven in the field.

Connect with Uponor. Connect with confidence. See more case studies at www.uponor.ca

sabMag - winter 2015/16

PEX PLUMBING RADIANT HEATING & COOLING HYDRONIC PIPING PRE-INSULATED PIPING

Dedicated to high-performance building LEED EDUCATION PROVIDER

Member Canada Green Building Council

SABMag is a proud member and official media partner of the Canada Green Building Council.

THE VALUE OF

PATIENCE

VISIT www.sabmagazine.com

In the run-up to the United Nations Climate Change conference in Paris, our

Publisher Don Griffith 800-520-6281, ext. 304, dgriffith@sabmagazine.com

newly elected federal government has been under some pressure to set hard GHG emissions reduction targets in order to restore international confidence in Canadaâ&#x20AC;&#x2122;s commitment to combat global warming. While such a commit-

Editor Jim Taggart, FRAIC 604-874-0195, architext@telus.net

ment is long overdue, Justin Trudeau and his advisors have wisely chosen not to give in to this temptation.

MARKETING MANAGER Denis Manseau 800-520-6281, ext. 303, dmanseau@sabmagazine.com Senior Account Manager Patricia Abbas 416-438-7609, pabbas8@gmail.com Graphic Design Carine De Pauw 800-520-6281, ext. 308, cdepauw@sabmagazine.com

Recognizing that meaningful consultation and consensus-building is even longer overdue in Canada, they have chosen to first consult with all levels of government and sectors of industry as well as with environmental and Aboriginal groups. Rightly, this process is seen as a fundamental prerequisite for moving forward on this file. While we must clearly respond to the international call to action, we must also be sure that the commitments we make are ones we can deliver on. We

Published by

must first agree on a framework within which the various carrots and sticks of www.janam.net 81 Leduc St.,Gatineau,Qc J8X 3A7 800-520-6281, ext.304, 819-778-5040 Fax: 819-595-8553

a national [or nationally devolved] carbon pricing policy can be implemented and administered. We also need to agree on the measurement tools that will be used for verification. Most important in convincing the more

Subscription/address changes: info@sabmagazine.com, 800-520-6281, ext. 304

reluctant stakeholders, will be to demon-

Subscription prices Canada: [Taxes extra]

strate how the balance of the economy

PRINT 1 year [4 issues] $24.95 2 years [8 issues] $46.95 3 years [12 issues] $67.40

can be recalibrated, and revenues from

DIGITAL $19.95 $34.95 $54.95

carbon taxes invested directly in renewable energy or other green projects. Such a direct connection between revenue and spending will capitalize on the substitution

effect, a reduction in fossil fuel invest-

Publication Mail Agreement #40024961

energy, transit infrastructure etc. It will also

ment and consumption being replaced by additional funding and capacity in green

Return undelivered Canadian address mail to: Janam Publications Inc., 81 Leduc St., Gatineau, Qc J8X 3A7

photo: Roy Grogan

bring greater transparency to the necessary transformation in the labour market. To use an architectural analogy, this

approach is an example of an integrated design process, in which all stakeThe print version of SABMag uses Rolland Enviro 100 Satin, a 100% post-consumer fiber that is certified FSC and EcoLogo. It is processed chlorine-free, FSC-recycled and is manufactured using biogas energy.

holders work toward a consensus, then optimize and verify their decisions by simulation. For complex projects, the additional investment of time and energy up front has consistently resulted in more aggressive performance targets and ultimately delivered better buildings. If we can all exercise a little patience, our long-awaited national climate change policy should provide us with similar results.

Jim Taggart, FRAIC

Editor

Environmental savings for this issue:

77 Trees

275,795 litres water

4,022 kg waste

9,805 kg CO2 sabMag - winter 2015/16

YOUR IDEAS ARE AHEAD OF THE CURVE. OUR SOLUTIONS ARE AHEAD OF THE CODES.

Stay ahead of the curve, choose Owens Corning™, Canada’s No.1 insulation products and systems to achieve optimum energy efficiencies that meet or can exceed today’s building codes.

1-800-GET-PINK® or visit owenscorning.ca

THE PINK PANTHER™ & © 1964-2015 Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved.The colour PINK is a registered trademark of Owens Corning. © 2015 Owens Corning. All Rights Reserved. 73% recycled content is based on the average recycled glass content in all Owens Corning fiberglass batts, rolls and unbonded loosefill insulation manufactured in Canada, SCS certified. GREENGUARD Certified products are certified to GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit ul.com/gg. UL Environment claim validations lend third-party credibility to single-attribute environmental claims.

sabMag - winter 2015/16

Architecture Canada | RAIC report

Towards Regenerative Design

By Peter Busby Sustainable design began with the intention of doing less damage to the planet through design and construction of the built environment, primarily around operational energy reductions. When LEED was introduced, it broadened the scope of sustainability and helped codify goals, calling for less degradation at each higher level of the standard. LEED Certified was better than nothing; LEED Silver and LEED Gold were less harmful than LEED Certified; LEED Platinum called for even less environmenal injury.

For over 20 years, those of us committed to sustainability focused primarily on wreaking less havoc on the natural world under the banner of “sustainability” without actually reaching the goals implied in the name. More recently, new strategies have asked the question, “Rather than doing less harm to the biosphere, shouldn’t we strive to do no harm?” True sustainability implies doing no harm to the environment and keeping nature intact. We have learned how to design and build “net zero” projects that aim to have no impact on specific energy targets. The Living Building Challenge establishes goals for projects that are self-sufficient for water, generate their own power without carbon emissions, and treat their own waste on-site. These projects operate in harmony with nature with no adverse consequences on the environment.

The continued deterioration of the biosphere reminds us that we are due for another paradigm shift. As carbon builds up in the atmosphere, garbage islands grow in the oceans, and the health of thousands of global species diminishes, it becomes increasingly apparent that we are losing time in the fight to save our planet. We now know that our planet needs more than a neutral partner. Nature needs humans to advocate for its health and sustainability, and to restore past damage; a colossal undertaking. It is time to design buildings and communities that give back to the environment. Our work must have positive effects on natural cycles that we have previously conspired to break. The buildings and systems we create must be one with nature, so that humans and their creations ultimately enter into a mutually nurturing relationship with the planet.

In nature there is no waste, and all living things depend on vast systems of support and balance. The organisms of the natural world not only thrive, but they do so for millennia. Humans were part of that natural balance for over 400,000 years. It is only recently and briefly, in particular since the industrial revolution, that we have grown to disregard nature and our place in it so callously. By bringing nature back intothe equation, we can develop regenerative designs that will reverse this tragic imbalance. Peter Busby, C.M., International Assoc., FRAIC, AIA, AIBC, AAA, MOAA, BCID, LEED Fellow, DSc [Hon.] and 2014 RAIC Gold Medal recipient is managing director at Perkins+Will, San Francisco.

Subscribe to ecoHouse digital Readers can now subscribe to and access the ecoHouse Canada digital versions on their phones and tablets through iTunes, Pocketmags or Google Play. ecoHouse Canada covers high-performance housing and related products for healthier and much more energyefficient living in one of the toughest climates in the world. High-performance housing is making great strides, and ecoHouse Canada will keep you in the know. Consider subscribing now …

ADS IN THIS ISSUE 2 Interface 4 Uponor 6 Owens Corning 8 Sustainable Forestry Initiative 9 Tremco 10 Dryvit 11 CertainTeed

17 Unilock 38 WalterFedy | Stonerox 44 Inline Fiberglass 47 Canadian Precast/ Prestressed Concrete Institute 48 Forbo Flooring

iTunes: http://apple.co/1QmCaqw Pocketmags: http://bit. ly/1W7W2l1 Google Play: http://bit.ly/1FRGXKX

sabMag - winter 2015/16

news Stay informed with SABMag e-News Add your name to the distribution list of the SABMag e-News. Distributed nine times per year, the SABMag e-News keeps you up-to-date on seminars, events and topics related to high-performance building; also notifications about the Canadian Green Building Awards, and more. Reply to dgriffith@sabmagazine.com.

Our oversight

In our article on the the Montreal Planetarium in the Fall, 2015 issue of SABMag, we omitted to mention Dupras Ledoux Inc. as the mechanical and electrical engineers for which we apologize.

Perkins+Will white paper cautions on PVC Despite laudable efforts by polyvinyl chloride [PVC] manufacturers to reduce the health and environmental impacts of their products, PVC still poses hazards that designers should consider before specifying products for the built environment, according to a white paper by

WOOD IS GOOD FOR GREEN BUILDING

Perkins+Will Architects. “PVC is a chlorinated plastic, which is potentially responsible for a range of human health and environmental problems. So even with the removal of leadbased stabilizers and toxic plasticizers, studies linking PVC to cancer throughout its lifecycle are still relevant,” says Suzanne Drake, a senior interior designer at Perkins+Will and co-author of the white paper. What’s New [and What’s Not] With PVC examines recent efforts by PVC manufacturers to remove carcinogenic phthalates from their products and rebrand those products as more environmentally friendly by labeling them as “clean” or “bio.” The paper also reviews recent scientific data on PVC’s health and environmental impacts in the wake of these product reformulations. “The bottom line is that the fundamental hazards inherent in the chemistry of PVC cannot be resolved,” says Melissa Coffin, principal investigator with the Healthy Building Network [HBN] and co-author of the white paper. “PVC will always require a highly toxic vinyl chloride monomer and produce even more potent dioxins during manufacture and disposal.” PVC has been on Perkins+Will’s Precautionary List since 2008. At that time, researchers concluded that environmentally superior building materials existed in virtually every product category where PVC options were found, and that these superior materials

could therefore replace PVC in nearly every design application. These categories include piping, wall coverings, window shades, and flooring. Seven years later, after a careful evaluation of the most recent scientific data available on PVC, the paper’s authors draw the same conclusion. “Even without scientific certainty, if competent evidence suggests adverse human health or environmental impacts may be associated with a certain substance, and if a building material contains that substance or may release that substance during its useful life, it’s our responsibility as architects and designers to make our clients aware of that fact and present them with alternative materials for consideration,” says Drake. To download a copy of the white paper: http://bit. ly/1M5TdJv

CertainTeed releases industry-first HPDs and EPDs for gypsum products

CertainTeed, a subsidiary of Saint-Gobain, is the first company in the gypsum manufacturing industry to offer Health Product Declarations [HPDs] and Environmental Product Declarations [EPDs] for drywall products. The newly published HPDs and EPDs provide scientifically robust and transparent information about environmental performance and third-party verification to confirm the true sustainability of a product. The declarations also allow products to contribute towards points in Leadership in Energy and Environmental Design [LEED] building projects. Forty-two HPDs have been published to cover all CertainTeed gypsum board product categories, including Standard and Specialty drywall; Type X fireresistant and M2Tech® moisture and mould-resistant drywall products, GlasRoc® exterior sheathing, AirRenew® Indoor Air Quality [IAQ] drywall; SilentFX® noisereducing drywall and Easi-Lite® lightweight gypsum boards.

CertainTeed releases HPDS and EPDS for its gypsum products

Sustainable Forestry Initiative Wood is a renewable, durable resource. Using wood products from responsibly managed forests in green building is key to keeping forests as forests. Third-party forest certification standards, like SFI, are a proof-point that wood comes from responsibly managed forests that have been managed for mulitple environmental, social and economic values — today and into the future. Learn more at sfiprogram.org/green-building

sabMag - winter 2015/16

Six EPDs [grouped by manufacturing plant location] are also now available for two popular products — Easi-Lite and 5/8-inch Type X fire-resistant gypsum board. The HPDs were issued in alliance with the HPD Collaborative, a customer-led organization committed to the continuous improvement of the building industry’s environmental and health performance, through transparency and innovation in the building product supply chain. The HPD is an open standard that establishes a common reporting language for disclosing information about the ingredients used to construct a building product and associated health information. HPDs can be used to obtain points in the LEED certification process under the Material and Resources credit in LEED version 4. CertainTeed partnered with UL Environment to develop the EPDs for EasiLite and 5/8-inch Type X gypsum boards. The EPD evaluates the products on critical environmental issues, such as production process impact, usage of raw materials and recycled content, packaging, health aspects and end of life impact. UL Environment provides independent verification of the data in accordance with ISO 14025. EPDs provide a valuable tool in undersanding the likely environmental performance of a building. Additionally, the use of EPDs greatly reduces confusion about technical information by providing a standardized format for communication of all impacts of a product or service — economic, environmental, human health, mechanical, safety and other attributes of the product type. EPDs are also useful in providing details required in specification documents as well as product information required in applications for certification in global green building systems. www.certainteed.com/gypsum/sustainability.

for all sectors of our communities. The new book, PLACES: Public Architecture, explores a selection of key projects by HCMA which offer insight into the firm’s specific approach to community building through public architecture. Featured projects typologies, many of which have been challenged by contemporary advancements in technology, include schools, libraries, fire halls, childcare centres, and more. Through the practice of architecture HCMA asks, “What is the future of the library, of education, and of public space in an increasingly online age?" Hard cover. Available for purchase on Amazon: ttp://www.amazon.ca/PlacesHughes-Condon-Marler-Architects/ dp/1941806449

people Architecture Canada/ RAIC names new executive director

Public Architecture, HCMA

Architecture + Design HCMA has consistently achieved an architecture that is expressive of time and place, and uniquely interprets Canadian values of openness and inclusivity. The firm’s concentration on civic buildings denotes a deeply rooted concern for community, and recognition that in contemporary pluralistic society’s schools, libraries and community centres are both, symbolically and literally, the meeting places

TTremco emc understands nde st nd d th thatt h having vi g a good g o roof o f starts t r with h kknowing o g tthat a roof’ o ff’s ccondition. ndii io Th TThat’ a ’s w why hy our u solutions l i n are based a ed on o thorough ou h diagnostic da n i evaluations. e a o s From F vegetative e e t e roofs oof and a d unique u q white wh e adhesive-based d i e a e built-up u t and d modified m d i d bitumen b u e roofs o fs to o a wide wd range a g off other t e energy-efficient energy e eg e efficient f e t roofi o fi fing ng g systems, y t ms , TTremco e o h hass the h solutions o u on architects hite h e t and nd building buildi d g ow owners e need eeed d to o lower w r the h costs o so of rrunning n i g new n w or o renovated re e o a ed facilities. f ciliti

TTo sch schedule h du a checkup c e k p for f r yyour o r roof roo orr to od disc di discuss scuss s ou our eenergy energy-effi e gy-e -effi fficient c n cient rroofs, ofs cal c llll (8 (800 (800) 0) 668-9879. 8 9 79

BOOK places,

Keeping Good Roofs Good To Reduce Costs And Improve Facility Performance

Architecture Canada/Royal Architectural Institute of Canada [RAIC] has appointed Jody Ciufo as its new executive director. During a 30-year-career, she has worked with several national non-profit associations including the Canadian Federation for the Humanities and Social Sciences, the Canadian Council of Professional Engineers, the Canadian Automobile Association, the Canadian Red Cross Society, and most recently as executive director of the Canadian Housing and Renewal Association.

Roofing o f ng and a dW Weatherproofing a h r p r o ng Peace P a off Mind. M d www.tremcor oof in g.com 50 Beth 5 e h Nealson o Drive Di e TToronto, o nto O Ontario t ri M4H 4 1M6 M6

sabMag - winter 2015/16

Get ready for the 2016 Canadian Green Building Awards The 2016 Canadian Green Building Awards, a joint program of Sustainable Architecture & Building [SABMag] and the Canada Green Building Council, is accepting submissions. The Awards recognize excellence in the design and execution of all types of sustainably-designed, high-performance Canadian residential and non-residential buildings of architectural merit, including new, existing, renovations and interior design projects. Projects need not be certified under a green building rating system.

moisture, allowing vapour to pass through it. It is suitable for both new construction and retrofit applications. www.wrmeadows.com

THE VANAIR VENTILATED DOOR

JURY -Calvin Brook, OAA, SAA, MRAIC, MCIP, RPP, LEED AP Partner, Brook McIlroy Architects, Toronto. -Marie-Odile Marceau, AIBC, FRAIC, LEED AP Partner, McFarland Marceau Architects, Vancouver.

-Marc Bertrand, OAQ, AAPPQ, MRAIC Partner, FABRIQ architecture, Montreal.

-Aman Hehar, P.Eng., LEED AP BD+C Energy Efficiency Manager, Humber College, Toronto. Deadline: March 4 Judging: March 11 Winning entries: will be announced at the CaGBC National Conference in Toronto in June, 2016, and published in the Summer issue of SABMag and at www.sabmagazine.com. All projects submitted will be considered for publication in other issues of SABMag or ecoHouse Canada. Register now to receive an Entry Kit:http://sabmagazine.com/ Register.html

sabMag - winter 2015/16

Custom Brick™

Lymestone™

TerraNeo®

Quartzputz®

Dryvit Announces HDCI™ Dryvit is pleased to announce a new program for our Outsulation and Stratum Guard family of systems. HDCI is short for High Durability Continuous Insulation. Engineered to protect, it provides all the features and benefits from our traditional systems – PLUS a 20-year warranty for impact resistance.

Specify Dryvit’s HDCI, and if the wall is punctured*, Dryvit will repair it.

products Water-based barrier evaluated for use in construction

The VanAir Ventilated Door is an advanced interior door that provides ventilation without sacrificing acoustic and visual privacy. Designed for commercial and residential buildings, the VanAir Door

promotes higher indoor environmental quality. The design of the door allows air to flow from one side, through the door and out the opposing side. Built-in acoustical baffles and Helmholtz resonators tuned to attenuate specific frequencies provide superior privacy when the door is closed. The airflow pathways through the VanAir Door mean that no complex modification of ceilings and walls are needed to accept ducting, vents and grilles. In addition, the door can be installed tight to the floor, avoiding overly large undercuts for better privacy and aesthetics. It fits standard door openings and is available in 1-3/4" and 1-3/8" thicknesses. It is suitable for hinged, pocket, double door, and sliding applications – and accepts all types of hardware, closers, drops, and sweeps. The VanAir Door is an easy, effective and elegant ventilation solution to promote circulation. www.vanairdesign.com

AIR-SHIELD LMP – a waterbased, air/liquid barrier product from W.R. Meadows – has been evaluated by the Air Barrier Association of America [ABAA] and listed on its website, www. airbarrier.org. ABAA is the voice of the air barrier industry in the U.S.. dedicated to education and listing of materials and assemblies which it has evaluated. AIRSHIELD LMP is formulated to act as a barrier to air and liquid

Outsulation® Systems are a trusted choice for architects, building owners and contractors who want a high performance, insulated cladding solution that can provide everything needed from a building code perspective, and a versatile appearance of stucco, limestone, brick or metal.

CCMC-12874-R

*Subject to Dryvit’s terms of warranty.

For more information call 1.800.263.3308 e-mail info@dryvit.ca

Information is power.

When the facts are clear, you make the best decisions. That’s the power of working with CertainTeed, an innovative leader in gypsum products featuring EPDs and HPDs—and the first in the drywall category to have them. With greener and more transparent choices from the start, you can make smarter and more sustainable choices across all of your commercial and residential needs. Be Certain™ you’re making the most informed choice with CertainTeed Gypsum. Visit www.CertainTeed.com/Gypsum/Sustainability.

EPDs and HPDs include: • Detailed breakdown of material content • Production process and life cycle stage diagrams • Health and safety information of production and use • Relative primary energy usage by life cycle stage

800-233-8990 • certainteed.ca • http://blog.certainteed.com ROOFING • SIDING • TRIM • DECKING • RAILING • FENCE GYPSUM • CEILINGS • INSULATION

sabMag - winter 2015/16

Regenerative Design in Practice

1 2 3 4 5

Living with Lakes Centre Sustainable Watershed Centre Bioswale Ramsey Lake Wetland

The Vale Living with Lakes Centre

The quest for a sustainable architecture must ultimately embrace the challenge of ecological regeneration. This idea has gained traction internationally through the work of architects such as Sin van der Ryn and Bill Reed, while in Canada the movement has been led by Dr. Ray Cole at the University of British Columbia. BY JIM TAGGART

Site plan

sabMag - winter 2015/16

To minimize solar gain, the main building was oriented east-west with external solar shades used on the south-facing glazing [1].

YOUR ONE VISION. OUR

INFINITE CHOICES. Unilock introduced permeable paving to North America in 1991, and has continued to lead the charge with new innovative products. Environmentally conscious product choices are more in demand than ever. Over the last 20 years Unilock has developed an extensive collection of innovative products for environmental concerns such as stormwater management. Now rainwater harvesting and water quality concerns can be alleviated by designing in style with beautiful colors and textures while promoting sustainability.

PROJECT: Mohawk College, Hamilton DESIGN: IBI Group, Toronto PRODUCT: Thornburyâ&#x201E;˘ Permeable paver The Vale Living with Lakes Centre at Laurentian University. Unilock Ecoloc pavers were installed on this project. Refer to pages 12-15 for full details on this project.

Contact your Unilock Representative for samples, product information and to arrange a Lunch & Learn for your team.

UNILOCK.COM

1-800-UNILOCK

sabMag - winter 2015/16

Beyond

Lot Lines Towards the Sustainable Transformation of Existing Neighbourhoods

True 'green' transformation requires 'bottom-up' collaboration; integrating a community's social and economic priorities with environment and climate change response. © www.EcoDistricts.org.

Triple Threat or Triple Bottom Line Environment, Equity, Infrastructure. These are three key challenges standing in the way of reshaping Canada’s aging urban [and suburban] fabric into more livable and resilient districts.

These present-day threats of infrastructure failure, environmental vulnerability and growing inequity might be characterised as the ‘perfect storm’ of challenges for cities and their existing neighbour-

By Wayne Olson

hoods. Compounded by increasing urbanization and smart growth plans that limit greenfield development, we have a perfect storm inside a pressure cooker.

Traditional responses to these problems have been compart-

The good news? This may be the nexus that drives innovation and

mentalized and resource constrained in a way that is increasingly

cross-sector collaboration allowing us to transform post-war neigh-

inadequate for the complex task of the so-called ‘triple bottom

bourhoods into connected, healthy, socially and culturally vibrant,

line’ [economy, society, environment] regeneration of existing

low carbon, prosperous communities - the building blocks for future

neighbourhoods:

great cities.

• Our cities, which are THE primary generators of climatechanging greenhouse gases globally, are being increasingly buffeted by climate change related events such as ice storms,

Old Way – New Way

flooding, heat waves and pests like the Emerald Ash Borer. These

Cities are increasingly intricate social, technical and economic

environmental stresses typically bring tweaks to building codes

ecosystems where everything connects. Intuitively, it is easy to

and modest green building standards that have little or no impact

understand that overly simplistic decision making may ignore

on existing built assets.

important issues and ‘externalities’ leading to unanticipated negative

• Urban inequity is a growing issue in many cities. Almost a third of children in Toronto grow up in poverty, with many living in poorly maintained rental housing. A key difference from post-war Canada is that today’s poverty is increasingly entrenched, meaning that our cities risk fostering a long-term “underclass” that remains in place despite a pinch of social program funding or a dash of affordable housing dollars from time to time • Canada`s civic infrastructure – just roads and pipes - carries a $170 Billion state-of-good-repair deficit. Unlike many U.S. or

effects, and to missed opportunities to synergistically support other urban priorities. There are endless examples of old, linear, silo-based problem solving frequently failing citizens, neighbourhoods and cities: • Neighbourhood streets are repaved one year only to be dug up the next year for utility work. • Transit investment drives up property values, forcing residents and locally owned business to relocate to ‘affordable’ areas with [ironically] poor transit.

European jurisdictions [and due in part to shrinking support from

• Lightly used local roads and urban laneways contribute multi-

upper-tier governments over the last four decades] most of the

lane expanses of impervious, heat absorbing pavements while cities

financial burden rests on the local property tax base - inadequate

face more heatwaves and flooding.

even before adding the financial burden of new infrastructure

• Communities designed for the car tend to limit active mobility

to serve urban growth and resilient infrastructure responding to

and demonstrate higher rates of obesity, diabetes and heart disease

climate change.

linked to higher health care costs and a decrease in productivity.

sabMag - winter 2015/16

CANADA AND

THE WELL

BUILDING

STANDARD As the average person now spends more than 90% of their time indoors, understanding how the built environment protects and supports human health is not only critical, but it presents a major opportunity. This is because healthy indoor environments can reduce toxic exposure, improve ventilation rates, support healthy eating and physical activity, enhance ergonomics, maximize daylighting and biophilic exposure, and allow for both focused group work and recovery time - to name just some of the benefits. Given this, the environments where we live, work, play and learn should enable us to more easily make these healthy choices.

By Whitney Austin Gray, Renée Rietveld and Martha MacInnis

Over the past decade, the building industry has increasingly positioned itself

The WELL Building Standard can be applied across

within the health and wellness conversation, with LEED as the catalyst, along with

many real estate sectors, with WELL v1 optimized for

the Living Building Challenge, Active Design Guidelines and others. Yet, there was

commercial and institutional office buildings. WELL is

a need to move beyond indoor environmental quality issues to include whole-

further organized into Project Typologies of New and

person health such as physical fitness, nourishment, mental health and wellness,

Existing Buildings, New and Existing Interiors, and Core

and to support healthy behavior choices. If, after all, even with optimal air quality,

and Shell, which account for specific considerations

you are still battling constant interruptions, glare from sunlight and temperature

that are unique to a particular building type. Pilot

regulation issues, compounded by a lack of healthy food options and no opportu-

Programs are also available for market sectors includ-

nity for physical activity breaks – the human body will be affected in other ways.

ing retail, multi-family residential, education, restaurant, and commercial kitchen projects.

A Path Toward Health and Wellness In 2014, the International WELL Building Institute (IWBI) released the WELL

WELL + LEED

Building Standard® [WELL] to address this exact need through a holistic

WELL and LEED complement each other in the

approach. As the world’s first building standard to focus exclusively on enhancing

optimization of healthy and high performance environ-

people’s health and well-being through the built environment, WELL sets forth a

ments. IWBI welcomes projects to pursue LEED along-

path for designing buildings that support wellness while educating and engag-

side WELL in order to promote both environmental

ing the design and health industries about the importance of building design on

sustainability and human health. LEED certification is

health. The culmination of seven years of rigorous research and development

important for achieving the best possible outcomes for

working with leading physicians, scientists and industry professionals, WELL is a

environmental sustainability, and WELL maximizes the

performance-based certification system that marries best practices in design and

potential for supporting human health and wellness.

construction with evidence-based medical and scientific research. Projects earn WELL Certification by achieving features in seven categories of building performance – air, water, light, nourishment, fitness, comfort, and mind. Each WELL Feature is designed to address issues that impact the health, comfort or knowledge of occupants through design, operations and behavior.

sabMag - winter 2015/16

WELL is like a NUTRITION LABEL for your building. WELL shows the ingredients that go into a healthy building, home or neighborhood. Copyright© 2015 by Delos Living LLC. All rights reserved [1]. touchdowns along the window provide views of the TD Centre green roof below as well as other active urban spaces outside of the towers [2].

P’egp’ig’lha Community Centre Traditional building ideas create energy-efficient, unifying space Located on a bench high above the Fraser River, and encircled by mountains, this 1850m2 building includes a community hall, health centre and band office for the T’it’q’et First Nation. The Nation, home to the P’egp’ig’lha, [or frog people]

sabMag - winter 2015/16

is a part of the Upper St’at’imc tribal group whose ancestral territory is now centred on the town of Lillooet in the arid southern interior of British Columbia. By Jennifer Marshall

BLACKSMITH LOFTS Re-purposed brick and beam factory preserves heritage Dating from the late 1800s, the original industrial building, now the Blacksmith Lofts of 27 modern apartments, served as a manufacturing facility for blacksmith forges and residential furnaces. By Patrick Simmons

Dating from the late 1800s, the building is part of the rich industrial heritage of Cambridge [1].

sabMag - winter 2015/16

Canadian Directory of Products and Services for Sustainable, High-Performance Building

THE ANNUAL GUIDE

LEED categories noted for the products listed in the following pages are intended to show how these products can potentially help a project earn LEED points

창

Companies listed in bold have 1/8-page listings containing more information, and are linked to their websites from the online version of the Directory 창

Visit the Directory online for Listings organized by Product Category and by LEED Category

www.sabmagazine.com/product-directory.html

sabMag - winter 2015/16

Site | Landscaping | Rainwater harvesting

* companies in bold have a 1/8-page listing

Green Screen | NC: SS c-7.2 /MR c-4 GSE Lining Technology, Inc. | NC: SS p-1 Hydrotech Membrane Corporation | NC: SS c-7.2 / EA c-1 Integrated Paving Concepts Inc. | NC: SS c-7.2 / MR c-4, 5 HOMES: MR C-2.2

Exterior Sto Corp. North America NC: SS c-7.1 / MR c-4 Syntal Products Ltd. | NC: MR c-4 Tatlors Recyled Plastics Inc. NC: MR c-4 | HOMES: MR C-2.2 Techno Protection NC: MR c-4 | HOMES: MR c-2.2

Invisible Structures Inc. | NC: SS c-6

TerraFirm Enterprises | NC: SS p-1 Terratechnik | NC: SS c-3

Carmanah Technologies | NC: SS c-8, EA C-1

Liveroof Ontario Inc. | NC: SS c-5.1, 5.2, 6.1, 6.2, 7.2 MR c-4, 5, 6 / WE c-1.1, 1.2

Champagne Edition Inc. | NC: MR C-4

Maglin Site Furniture | NC: MR c-4

Unilock | SS 6.1, SS 6.2, SS 7.1 / MR. 4.1, MR 4.2, MR 5.1, MR 5.2

Colbond Inc. | NC: SS P-1, SS C-5

Midpoint International Inc. | NC: MR c-4

Wishbone Industries Ltd. NC & CI: MR c-4 HOMES: MR c-2

Contech Construction Products Inc. | NC: SS P-1

Millennium Decking | NC: MR c-4 | HOMES: MR c-2

Rainwater harvesting

CRS Electronics | NC: SS C-8 /EA C-1

Molok North America Ltd. NC: MR p-1 / MR C-4

Bordna Mona Inc. | NC: SS c-6 WE c-2, 3 | HOMES: WE c-1

Deltalok Inc. – Green Retaining Wall Structures | NC: SS c-5.1

Mutual Materials NC: SS c-6, 7.1 | HOMES: SS C-2

Jay R. Smith Co. | NC: SS c-6 WE c-2,3 | HOMES: WE c-1.1

D. Litchfield & Co Ltd. | NC & CI: MR c-1, 2 | HOMES: MR C-2.2, 3

N.A.T.S. Nursery Ltd. | NC: SS c-7.2

Waterloo Biofilter Systems Inc. NC WE c-2 | HOMES: WE c-1

Envirobond Products Corporation | NC: SS c-7.1 | HOMES: SS C-3 Epcor | NC: we c-2

Nitterhouse | NC: SS c-6, 7.1 / EA c-1 | HOMES: SS C-2, 4 / EA C-5 Performance Bike | NC: SS c-4.2

ZCL Composites Inc. NC: SS c-6 / WE c-2,3

Advanced Panel Ptoducts Ltd. NC: EA c-1 / MR c-4 All Weather Insulated Panels | NC: SS c-7.2 / EA c-1 / MR c-4 Alumicor Building Excellence | MR c-4 Arclin | NC: EQ c-4 Armtec | NC: MR c-4 Canadian Brass and Copper Co. NC & CI: MR c-4 | HOMES: MR c-2.2 CBR Products NC & CI: EQ c-4.2 HOMES: MR c-2 Dryvit Systems Canda NC: EA c-1 | HOMES: EA c-2 Dupont/Tyvek NC & HOMES: EA c-1 Engineered Assemblies | NC: ID c-1, MR c-8 Flynn Canada Ltd. NC: SS c-7.2 / MR c-4 Henry | NC, CS & EB: O&M: SS c-5, 6, 7.2 / EA c-1 / WE c-1, 3 Insulspan | NC: EA c-1

Stormwater

Kawneer Company Inc. NC & CI: MR c-4 | HOMES: MR c-2.2

Gator International | NC: SS c-3

Pontarolo Engineering Inc. NC: SS c-3

GE WattStation | NC: SS c-4.3

Smart Ditch | NC: SS p-1

Kingspan Insulated Panels NC: EA c-1

Gear Up | NC: SS c-4.2

Aqua-Tex Scientific Consulting Ltd. NC: SS c-1 | HOMES: WE c-1

South Side Air NC: SS c-8 / EA c-2

Royal Liner | NC: SS p-1, SS c-6

KlipTech Composites NC & CI: MR c-3, 4, 6

greenscreen®

WISHBONE SITE FURNISHINGS

greenscreen® is a modular three-dimensional, welded wire trellis system with a complete attachment system for wall mounted or freestanding applications. Custom shapes, columns, and colors available.

A recognized leader in the development and manufacture of “Made in Canada” street furnishings. Using recycled plastics and metals, Wishbone products speak innovation through design that is aesthetically pleasing and functional.

800-450-3494 www.greenscreen.com

LEED NC SS c-5.1, 6.1, 7.1, 7.2 / WE c-1 / MR c-1.1, 2, 3, 4, 5 / IEQ c-4.2 / ID c-1

sabMag - winter 2015/16

866-626-0476 WishboneLtd.com

LEED NC & CI MR c-4 LEED HOME MR c-2

Busch Systems is a prominent designer and retailer of innovative recycling, waste and composting containers including the exclusive Designer Collection. All products are 100% recyclable and made in North America.

www.buschsystems.com

LEED NC & CI MR c-1, c-2 LEED EB: O+M MR c-2, c-7, c-8, c-9

Unilock products can help with your LEED certification goals. Our products have been used on many LEED projects in North America. For additional information please contact: COMMERCIAL.UNILOCK.COM | 1-800-UNILOCK Potential LEED Credits for utilizing Unilock Permeable Pavers SS 6.1, SS 6.2, SS 7.1 / MR. 4.1, MR 4.2, MR 5.1, MR 5.2

Structure & Exterior envelope McGill Architectural Products NC & CI: EA c-1 / EQ c-5 Metl-Span | NC: SS c-7.2 / MR c-4,6 Nichiha NC: MR c-4 | HOMES: MR c-2.2 P.F.B Corporation | HOMES: MR c-1

Elevated Landscape Technologies Inc. | NC: SS c-7.2 | HOMES: SS c-3 ELT Easy Green: Green Roof Systems | NC: SS c-6 / EA c-1 WE c-3 | HOMES: SS c-4 / EA c-2

Stonerox | NC: MR c-4

Envirospec Incorporated NC: SS c-7.1

Terramai | NC: MR c-3, 7 HOMES: MR c-2.1,2.2

Firestone Building Products NC: SS c-7 / MR c-4

Thames Valley Brick and Tile

G.E.M. Inc./Euroshield | NC: MR c-3.2, 4.2 | HOMES: MR c-2.2

Triton Logging Company NC: MR c-4 | HOMES: MR c-2.2 Uniboard Canada Linc. NC: MR c-4.4, 7 | HOMES: MR c-2.1

Green Innovations NC: SS c-7.1 | HOMES: SS c-3 Green Over Grey | NC: SS c-7.1

United Stages Aluminum NC: MR c-4

Green Space Roofing NC: SS c-7.2 | HOMES: SS c-3

VicWest | NC: SS c-7.2 / EA c-1 MR c-4 | HOMES: MR c-2.2

Hydrotech Membrane Corporation SS c-6.1, 7.2 / MR c-4, 5 Jakob Inc. | NC: MR c-4

Roofing BioRoof Systems | NC:SS c-7.2

Johns Manville NC: SS c-7.2 | HOMES: SS c-3

Sika/Sarnafil NC: SS c-7.2 /EQ c-4.1, 4.2 Soprema | NC, CS & EB: O&M:SS c-5, 5.1, 5.2, 6, 6.1, 6.2, 7.2 / EA c-1 / WE c-1.1, 1.2, 3 / MR c-1.1, 3, 4.1, 4.2, 5.1

Lafarge North America Inc. NC: MR c-4

Siplast Lcopal Inc. | NC: SS c-7.2

Logix Insulated Concrete Forms NC & HOMES: EA c-1

Tremco | NC: SS c-7.2 VaproShield | NC: MR c-4

McKillican International Inc. NC: MR c-2.1,4

Vitaroofs | NC: SS c-6, c-7.2 WE c-1/EA c-1/MR c-5

Meiser Canada | NC: MR c-3,4

W.R. Meadows of Canada NC & CI: SS c-8 / RP c-1 XeroFlor | NC: SS c-7.2 / EA c-1

Nucor-Yamato Steel NC & CI: MR c-4 | HOMES: MR c-2.2

ZinCo Canada | NC: SS c-6 EA c-2 | HOMES: EA c-10

Nudura | NC: EA c-1 / MR c-4 HOMES: EA c-2

Structure

Polycrete | NC & HOMES: EA c-1

Amvic ICF | NC: EA c-1 / MR c-4 HOMES: EA c-1 / MR c-2 Bailey Metal Products Ltd. | NC: MR c-4, MR c-5 HOMES: MR c-2.2

Caradoc Green Roofs Ltd. NC: SS C-7.2

Lexcan Limited | NC: WE c-2

Carlisle Construction Materials NC: SS c-7.2 Carlisle SynTec | NC: SS c-7.2

Liveroof Ontario Inc. NC: SS c-5.1, 5.2, 6.1, 6.2, 7.2 MR c-4, 5, 6 / WE c-1.1, 1.2

Crowe Building Products Ltd. NC: MR c-4 | HOMES: MR c-2.2

Metal Roofing Alliance NC: SS c-6 / WE c-1 / MR c-4

Detec Systems | NC: SS c-7

N.A.T.S. Nursery Ltd. NC: SS c-7.2 RoofRoc Canada Ltd. | NC: MR c-4

Hycrete, Inc. | NC & CI: MR c-4

At Bailey Metal Products Ltd. we are committed to the advancement of lightweight steel framing as an environmentallyfriendly green building product that reduces energy consumption and waste, improves indoor air quality and conserves water and natural resources for both new and existing commercial and residential buildings.

Duro-Last® Roofing, Inc. NC: SS c-7.2

Alumicor is a leading supplier of architectural aluminum building products, supporting LEED® and green building projects. Alumicor serves North America through facilities in Winnipeg, Toronto, Montreal and Halifax. Winnipeg Toronto Montreal Halifax

1 1 1 1

800 665 3635 877 258 6426 866 586 4267 888 346 5151

Metl-Span | NC: SS c-7.2 / MR c-4,6

www.dryvit.ca

Nordic Engineered Wood NC: MR c-7 | HOMES: MR c-2.2

Bone Structure | NC: MR c-4 Butler Buildings Canada NC & CI: MR c-4 | HOMES: MR c-2

Canadian Brass and Copper Co. NC & CI: MR c-4 | HOMES: MR c-2.2

Tembec NC: MR c-7 | HOMES: MR c-2.1

Canam / Murox | NC: MR c-4

Walters Inc. | NC: MR c-4

CertainTeed | NC & CI: MR c-4 HOMES: MR c-2.2

Western Archrib NC: MR c-6 | HOMES: MR c-2.1

1-800-668-2154 www.bmp-group.com LEED NC MR c-4, MR c-5 LEED HOMES MR c-2.2

Engineered Assemblies specializes in thermally-broken facades. EA’s TcLip™ ensures a higher effective R value with maximized design freedom. Structural and Thermal testing confirms TcLip™ as the superior choice for minimized thermal bridging.

engineeredassemblies.com LEED NC ID c-1, MR c-8

sabMag - winter 2015/16

StoneRox iS “Facing the FutuRe” in a veRy gReen way Thin really is in, especially when it comes to renovating your home or business, or even building new. Using a thin stone veneer instead of the typical full-depth stone will save you both time and money… and who doesn’t want more of those! Thin stone veneer is lighter in weight, faster to install, and more economical to use than traditional, full-depth stone. StoneRox manufactures a comprehensive line of Thin Stone Veneer products that exceed the Green environmental goals of Architects, Designers and Builders by addressing several environmental issues. Manufactured in Stouffville, Ontario, StoneRox uses recycled materials to produce quality interior and exterior products that reflect the Canadian landscape and culture, with little to no maintenance. The overall carbon footprint from transportation emissions is greatly reduced and opportunities are created for local distributors and regional economical development while providing sustainable design solutions. Our products maintain the appearance of natural stone without the added weight or installation costs and less waste is generated. We’re committed to preserving our beautiful planet’s resources and to the continual development of products that are more environmentally friendly, cost-effective and attractive. StoneRox products come in several styles and colour blends that are reflective of our Canadian landscape, allowing for custom designs that inspire. The options are truly endless! Together with you, we’re saving our planet, and “Facing the Future”… one project at a time.

www.stonerox.ca Facing the Future

stonerox ad.indd 1 ® Award-winning, LEED Platinum Certified design Civil, Structural, Mechanical & Electrical Engineering, LEED® Consulting - University of Waterloo – Environment 3

2015-12-10 3:07 PM

ARCHITECTURE ENGINEERING CONSTRUCTION

Our energy management team specializes in making buildings run more efficiently. Our comprehensive energy studies can show you how to save money in the long term and start reducing your carbon footprint.

800.685.1378 WALTERFEDY.COM DESIGN • BUILD • RENEW

sabMag - winter 2015/16

ROXUL NA HEAD OFFICE - New 25,000 square foot two-storey development uses Inline Fiberglass Ltd.

High Performance Series 400 Commercial Window System. ARCHITECT: SRM ARCHITECTS INC. \ CONTRACTOR: STAHLE CONSTRUCTION INC.

235 FITCH STREET SENIORS RESIDENCE - New 50,000 square foot three-storey residential project uses Inline Fiberglass Ltd.

High Performance Series 325 Fixed/Awning Windows. ARCHITECT: MACDONALD ZUBEREC ENSSLEN ARCHITECTS INC. \ GENERAL CONTRACTOR: BROUWER CONSTRUCTION LTD.

VALUE THROUGH INNOVATION The Fiberglass reinforced polymer window frames in these projects are engineered to exhibit superior thermal values, durability and excellent dimensional stability. They are designed to meet the energy demand in SB10 and SB12 code requirments.

Call us to discuss your next project. www.inlinefi berglass.com 1.866.566.5656 44 sabMag - winter 2015/16

MEMBER/MEMBRE

Interview with Rodney Wilts Rodney Wilts, a partner at Windmill Development Group, has a big role to play in the coming years as he helps to guide Zibi [meaning river in Algonquin, www.zibi.ca], one of the most significant brownfield redevelopments anywhere by Windmill and by Dream Unlimited Corp. The $1.2 billion project on the Ottawa River, between Ottawa and Gatineau, will refurbish the Domtar industrial buildings and add new residential, commercial and public space.

âSABMag: Zibi is being called a 'beacon' project. What's the

âSABMag: Will Zibi follow the same design model that Windmill

vision for it?

created for Dockside Green in Victoria?

áRW: The vision is to transform a contaminated and tired

áRW: Each project we do is unique, and informed by place and com-

former industrial site into a sustainability showpiece less than

munity. We have taken some of the things we learned from Dockside

We had eight

and applied them to Zibi, but in many ways Zibi is more ambitious. The

design principles based on the One Planet Living model [www.

number of heritage buildings, and the incredible rich history of the site

bioregional.com/oneplanetliving] that guided the master plan-

are very different than what we had at Dockside.

one kilometre upriver from Parliament Hill.

ning ranging from ‘Design with Ecological Systems in mind’ to ‘Celebrate Heritage’ to ‘Foster and Enable Healthy Living’.

âSABMag:There is still industrial activity nearby so how can you incorporate that into the project?

âSABMag: The project is complicated by the various levels

áRW: The Kruger Mill is still operating just downriver on the Gatineau,

of government. How do you collaborate with them?

Quebec near the Canadian Museum of History. We’re looking to capture

áRW: We’ve had the great pleasure of collaborating with

waste heat from Kruger as part of our district thermal plant.

Ottawa, Gatineau and the National Capital Commission. We’ve treated them as partners in the project, looking to deliver on

âSABMag: What will the first phase of Zibi entail?

their key priorities like intensification, improved public realm,

áRW: We have a first phase in Ottawa and a first phase in Gatineau

greenhouse gas reductions, tourism etc.

already launched. Each of those phases consists of repurposed heritage assets, an amazing public square, and new, green mixed-use buildings. Each first phase is intended to be a microcosm of all the great things that will be delivered by the broader development.

the enwave theatre, toronto.

The Zibi redevelopment includes both ottawa and gatineau as indicated by the orange outline.

sabMag - winter 2015/16

ENVIRONMENTAL PRODUCT DECLARATION

EPD PRECAST CONCRETE

In accordance with ISO 14025

Place de l’Escarpement, Quebec City, QC – LEED Gold Certified Architect: Pierre Martin Architecte

EPDs are third party verified (certified) reports published by product manufacturers that provide quality assured and comparable information regarding environmental performance of their products or system. The CaGBC LEED v4 Rating System and Architecture 2030 are emphasizing the demand for EPDs, by addressing transparency in environmental lifecycle impacts and the selection of building products with improved lifecycles. North American Precast Concrete associations are working together with ASTM International and Athena Sustainable Materials Institute to achieve a third party- verified EPD; providing comprehensive, uniform, and transparent details about a product’s composition and environmental impact throughout its lifecycle. Available in the fall of 2014.

Ask insightful questions before making decisions. Expect transparency. For your free copies of the Life Cycle Assessment of Precast Concrete and the CPCI Sustainable Plant Program contact CPCI at: info@cpci.ca or (877) 937-2724 or visit www.cpci.ca/publications.

196 Bronson Avenue, Suite 100 Ottawa, ON K1R6H4 sabMag - winter 2015/16 47

creating better environments

Introducing

Modular Striato tileS & PlankS!

59 colors. 4 coordinated sizes. endless possibilities. beautiful. durable. sustainable. hygienic. www.forboflooringNA.com 48

sabMag - winter 2015/16