How to Pass 300-115 Exam in the First Try

How to pass 300-115 Exam In the first Try?

Exam Details Exam Name: Implementing Cisco IP Switched Networks Exam Code: 300-115 Total Questions: 214 Exam Link: http://braindumpskey.com/exam/300-115.html

Exam Description This exam declares the switching experience and abilities of successful candidates. They are certified in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture.

http://braindumpskey.com/exam/300-115.html

300-115 Exam Questions Question 1 What is the maximum oumber if switches that cao be stacked usiog Cisci StackWise?

A.4 | B. 5 | C. 8 | D. 9 | E. 10 | F. 13 Answer: D

http://braindumpskey.com/exam/300-115.html

300-115 Exam Questions Question 2 A network engineer wants to add a new switch to an existing switch stack. Which configuration must be added to the new switch before it can be added to the switch stack?

A. No configuration must be added.

B. stack ID C. IP address D. VLAN information E. VTP information Answer: A

http://braindumpskey.com/exam/300-115.html

300-115 Exam Questions Question 3 What percentage of bandwidth is reduced when a stack cable is broken?

A.0

B. 25

C. 50

D. 75

E. 100

Answer: C

http://braindumpskey.com/exam/300-115.html

300-115 Exam Questions Question 4 After an EtherChannel is configured between two Cisco switches, interface port channel 1 is in the down/down state.

Switch A is configured with channel-group 1 mode active, while Switch B is configured with channel-group 1 mode desirable.

Why is the EtherChannel bundle not working?

A.The switches are using mismatched EtherChannel negotiation modes.

B. The switch ports are not configured in trunking mode C. LACP priority must be configured on both switches.

D. The channel group identifier must be different for Switch A and Switch B. Answer: A

http://braindumpskey.com/exam/300-115.html

300-115 Exam Questions Question 5 Interface FastEthernet0/1 is configured as a trunk interface that allows all VLANs. This command is configured globally: monitor session 2 filter vlan 1 - 8, 39, 52 What is the result of the implemented command?

A.All VLAN traffic is sent to the SPAN destination interface.

B. Traffic from VLAN 4 is not sent to the SPAN destination interface.

C. Filtering a trunked SPAN port effectively disables SPAN operations for all VLANs. D. The trunk's native VLAN must be changed to something other than VLAN 1 E. Traffic from VLANs 1 to 8, 39, and 52 is replicated to the SPAN destination port.

Answer: E http://braindumpskey.com/exam/300-115.html

300-115 Exam Questions Question 6 A network engineer notices inconsistent Cisco Discovery Protocol neighbors according to the diagram that is provided.

The engineer notices only a single neighbor that uses Cisco Discovery Protocol, but it has several routing neighbor relationships. What would cause the output to show only the single neighbor?

A.The routers are connected via a Layer 2 switch B. IP routing is disabled on neighboring devices C. Cisco Express Forwarding is enabled locally D. Cisco Discovery Protocol advertisements are inconsistent between the local and remote devices Answer: A http://braindumpskey.com/exam/300-115.html

300-115 Exam Questions Question 7 After the implementation of several different types of switches from different vendors, a network engineer notices that directly connected devices that use Cisco Discovery Protocol are not visible. Which vendor-neutral protocol could be used to resolve this issue?

A.Local Area Mobility B. Link Layer Discovery Protocol C. NetFlow D. Directed Response Protocol Answer: B

http://braindumpskey.com/exam/300-115.html

300-115 Exam Questions Question 8 Several new switches have been added to the existing network as VTP clients. All of the new switches have been configured with the same VTP domain, password, and version. However, VLANs are not passing from the VTP server (existing network) to the VTP clients. What must be done to fix this?

A.Remove the VTP domain name from all switches with "null" and then replace it with the new domain name B. Configure a different native VLAN on all new switches that are configured as VTP clients C. Provision one of the new switches to be the VTP server and duplicate information from the existing network.

D. Ensure that all switch interconnects are configured as trunks to allow VTP information to be transferred.

Answer: D http://braindumpskey.com/exam/300-115.html

300-115 Exam Questions Question 9 After implementing VTP, the extended VLANs are not being propagated to other VTP switches. What should be configured for extended VLANs? A.VTP does not support extended VLANs and should be manually added to all switches.

B. Enable VTP version 3, which supports extended VLAN propagation.

C. VTP authentication is required when using extended VLANs because of their ability to cause network instability.

D. Ensure that all switches run the same Cisco IOS version.

Extended VLANs will not propagate to different IOS versions when extended VLANs are in use.

Answer: B http://braindumpskey.com/exam/300-115.html

300-115 Exam Features • • • • •

Free Updates on Regular basis 100% Real Exam Questions & Answers for Cisco 300-115 100% exam passing assurance Up-to-date 300-115 braindumps Our All Cisco 300-115 exam Q & A are verified by experts

http://braindumpskey.com/exam/300-115.html

Exam Name: Implementing Cisco IP Switched Networks Exam Code: 300-115 Exam Link: http://braindumpskey.com/exam/300-115.html

Thanks For Watching ď Š

http://braindumpskey.com/exam/300-115.html