4
:: LABORATORY EQUIPMENT
Laboratory equipment 0001.00
Retort stand base A-shape cast iron with stoved enamel finish. Length of feet 200 mm, with 10 mm dia. hole and fixing screw for retort stand rods dia. 10 mm, supplied with rubber feet. Weight: 2.0 kg. 0001.00 Retort stand base
Retort stand base Stump-shaped cast iron with stoved enamel finish, designed to accept 10 mm. dia. retort stand rods, complete with thumb screw. Weight: 0.43 kg.
0004.00
0004.00 Retort stand base
Retort stand base Stump-shaped cast iron with stoved enamel finish, designed to accept 10 mm. dia. retort stand rods, complete with thumb screw. Weight: 0.57 kg.
0004.10
0004.10 Retort stand base
Retort stand base Tripod in cast iron with stoved enamel finish. Designed to accept 10 mm. dia. retort stand rods, complete with fixing screw and rubber feet. Weight: 1.0 kg.
0006.10
0006.00 Retort stand base 0006.00
Retort stand base Tripod in cast iron with stoved enamel finish, with vertical tubing equipped with thumb screw. Designed to accept 10 mm dia. retort stand rods. Weight: 1.20 kg.
0008.40-.60
0006.10 Retort stand base
0008.00-.30
Retort stand rods Made of polished solid stainless steel 10 mm dia. No.
Length
Diameter
0008.00 0008.10 0008.20 0008.30 0008.40 0008.50 0008.60
150 100 75 50 60 25 10
12/10 12/10 12/10 12/10 10 10 10
速
cm cm cm cm cm cm cm
mm mm mm mm mm mm mm
Science Equipment for Education Physics
LABORATORY EQUIPMENT
::
5
Table clamp Designed for mounting of retort stand rods to the edge of a table. The holes can accommodate rods of up to 13 mm in diameter. The maximum clamp opening is 65 mm. The mass of the clamp is 0.36 kg. The clamp is made of cast iron with stoved enamel finish.
Retort stand base (incl. rod) Steel plate 155 x 200 mm in stoved enamel finish, with one M10 hole for retort stand rod of nickel-plated steel. Retort stand rod 10 mm dia., length 60 cm. Weight: 2.8 kg.
0016.00 Table clamp
Table clamp, universal 0016.00
0010.00 Retort stand base (incl. rod)
0010.00
Designed for securing round or square retort stand rods up to 25 mm in diameter or plates up to 20 mm thick. The clamp can be mounted on the edge of a table, thickness up to 56 mm. Manufactured of cast iron with lacquered finish. Weight: 1.2 kg. 0016.10 Table clamp, universal
0018.10
0016.10
Clamp
0018.30
Clamp with rounded jaws of light alloy on a 10 mm. dia. steel shaft. Enables articles from 20 to 55 mm. dia. to be clamped securely, with cork lined jaws. Total length: 240 mm. Weight: 0.2 kg.
0018.40
0018.10 Clamp
Clamp Clamp with diecast lacquered angular jaws on a 10 mm. dia. steel shaft. Enables articles from 10 to 40 mm dia. to be clamped securely, with cork lined jaws. Total length: 200 mm. Weight: 0.22 kg.
0018.00
0018.30 Clamp
Clamp
Universal Clamp
Clamp with overlapping jaws on a 10 mm dia. Steel shaft. Enables articles from 0-40 mm dia. To be clamped securely. Jaws are coated with soft PVC. Length 230 mm. Weight: 0,14 kg.
Clamp with overlapping jaws of lacquered aluminium on a 10 mm dia. steel shaft. Enables articles from 2 to 85 mm dia. to be clamped securely, with cork lined jaws. Equipped with a double-threaded quick-tightening arrangement for ease of use. Total length: 230 mm. Weight: 0.18 kg.
0018.00 Clamp
0018.40 Universal Clamp
Science Equipment for Education Physics
速
6
:: LABORATORY EQUIPMENT
Bosshead Double Bosshead in lacquered aluminium with two slots at right angles to take round or square rods from 7 to 16 mm dia. Total length: 130 mm. Weight: 0.18 kg.
0023.00
0023.00 Bosshead
Universal bosshead Double Bosshead made of lacquered aluminium, with four slots at right angles to take round or square rods up to 16 mm dia. With 2 angular screws. Overall length: 55 mm. 0023.10 Universal bosshead 0023.10
0023.20
Suspension hook Support rod clamp, rotatable This rotatable double rod clamp is made of pressure cast zinc and finished with lacquer. For support rods from 718 mm in diameter. Total length 155 mm. Weight: 0,174 kg.
Suspension hook made of lacqured aluminium, hook in nickel-plated brass. Clamps on retorts stand rods from 7 to 16 mm dia. Total length: 130 mm. Weight: 0.1 kg. 0027.00 Suspension hook
0023.20 Support rod clamp, rotatable 0027.00
Support rod clamp with 10 mm diameter hole Designed for support of equipment using a 10 mm rod. Lacquered, pressure cast zinc. Can be mounted on retort stand rods with a diameter from 7 to 18 mm. Total length: 80 mm. Weight: 0,077 kg. 0028.00 Support rod clamp 0028.00
速
Science Equipment for Education Physics
LABORATORY EQUIPMENT
::
7
0038.20
0038.00 0038.10
Heating ring
Leveling table
Manufactured of nickel plated steel with a clamp for mounting on retort rod clamps from 6 - 15 mm in diameter. Ring diameter: 60 mm. Total length: 190 mm. Weight: 0,15 kg.
The table size is: 165 x 130 mm. The height variation range is from 62 to 277 mm. It is produced using stainless steel plates with a fast regulating spindle and 8 ea. securing screws. Supplied with rubber pads. Weight: 1.7 kg.
0038.00 Heating ring
0036.00 Leveling table
Heating ring As item 0038.00 but with a ring diameter of 80 mm. Total length 205 mm. Weight: 0,22 kg. 0038.10 Heating ring
Heating ring Manufactured of nickel plated steel with a 10 mm dia. support rod mount. Ring diameter: 80 mm. Total length: 240 mm. Weight: 0,17 kg.
Leveling table The table size is: 200 x 200 mm. The height variation range is from 62 to 276 mm. It is produced using stainless steel plates. Fast regulating spindle with 8 ea. securing screws and rubber pads. Mass: 2.6 kg. Weight: 2.4 kg. 0036.10 Leveling table
0038.20 Heating ring 0036.00
0036.10
Science Equipment for Education Physics
速