Electron A12 A1
S.R.L.
Design Production & Trading of Educational Equipment
ELECTRICAL INSTRUMENTS SUPPLIES, ACCESSORIES
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 03/04 Specifications may change without notice
Page - 1 -
File A12
A1212-B0240 POWER SUPPLY FOR ELECTRONICS LABORATORY
This unit is designed to be equipped to Laboratory desks in order to provide safe and handy voltage supply sources. The unit consists of a metallic case of approx 350 x 390 x 1000 mm size (H x D x W) with clear silkprinting indication of controls, output voltages and ratings.
in such a manner that they can be connected in series to make a 0-60 V source or a dual source 0 to +/- 30 V. Current rating is 2 A on each output, short-circuit proof. 2 stabilized DC sources at selectable and fixed voltages 6, 12, 24 V, with adjustable current limiting 0.5 to 10A. 2 stabilized DC sources at 5 V, with short-circuit protection at 1 A.
The module includes: magneto-thermic differential AC mains breaker, with lamp “ON” indication and emergency “OFF” button 4 AC mains output socket, SHUKO standard, 6A each 1 adjustable AC output source 0-220 V (or 240 V depending on local AC mains voltage), current rating 1 A, fuseprotected 2 stabilized DC sources 0-30 V, separately variables and independent,
Technical characteristics of DC stabilizers (all types) output ripple at rated load: better than 50 mV rms voltage change from 10% load to 90% load: better than 1.5% ORDERING CODE B0240
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 03/04 Specifications may change without notice
Page - 2 -
File A12
A12SUPPLY PPLY 12-BTP2BTP2- POWER SU
This unit is designed to be mounted on a two-student work desk, to provide safe and handy voltage sources for the experimental work
4 AC mains output sockets, SHUKO standard, 6A each. The mains outlets are provided with an illuminated ON/OFF switch. 1 variable stabilized DC source 1.2 to 30V DC approx, with variable current limitation in the range of 0 to 2A approx. The unit is provided with a 3-digit digital Voltmeter with high visibility displays DC output sources at the fixed voltages of +12, -12 DC with electronic current limitation at 0.5A. 1 stabilized DC source at 5V DC, with electronic short-circuit protection at 2A.
The unit consists of a metallic case of approx. 1000 x 360 x 320mm (W x D x H), with clear silk-screen printed indication of the controls, outputs, voltages and ratings. Technical characteristics: Magneto-thermal residual-current circuit breaker for the AC mains, with light indicators and a key-lockable switch to prevent unauthorized use. 1 variable AC supply, rated at 0 to 250V AC, 1A (Fuse protected) 1 variable AC supply, rated at 0 to 24V AC, 5A (Fuse protected)
ORDERING CODE BTP2
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 03/04 Specifications may change without notice
Page - 3 -
File A12
A12 – ELECTRICAL MEASUREMENT BASIC SET SL150RV– MOVING IRON VOLTMETER A12A12-SL150RV– – – – –
Portable moving-iron voltmeters, suitable for both DC and AC measurements. Class 0.5 AC Class 1 DC 4 ranges
A12--SL150RA – MOVING IRON AMMETER A12 Portable moving-iron ammeter, suitable for both DC and AC measurements. Class 0.5 AC Class 1 DC 2 ranges
A12--SL150ED – SINGLE PHASE A12 WATTMETER – – – –
Portable electrodynamic instruments used equally well for both DC and AC measurements up to 100 Hz. Class 0.5 Two current ranges Four voltage ranges
SL--150 SL – – – –
– SINGLE PHASE COSFI METER
Suitable for power factor (cos ) measurements. Scale 0.2IND –1 – 0.8CAP 0.5IND –1 – 0.5CAP on request 0IND –1 on request Two current ranges Two voltage ranges
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 03/04 Specifications may change without notice
Page - 4 -
File A12
A12– A12 –680G – ANALOGUE AVO METER – – – – – –
DC current 50µA ÷ 5A AC current 250µA ÷ 2.5A DC voltage 100mV ÷ 1000V AC voltage 2V ÷ 1000V Resistance x1 ÷x10000 Sensitivity 20.000 L/VDC 4.000 L/VAAC
A12--PW PW--E/G WHEATSTONE BRIDGE A12 – – –
For measurement of resistance from 0.1 to 10 ML with the accuracy of 0.5% Completed with electronic galvanometer, scale 30-0-30 sensitivity 1 µA/div. Two pair of terminals for connecting the unknown resistance and battery.
A12--PMS PMS--D/1 MAXWELL DE SAUTY BRIDGE A12 – – – –
For measurement of inductance from 1mH to 100H. For measurement of capacitance from 1nF to 100µF Measuring range in 3 digit reading. Accuracy ±1% of the range (50 ÷ 60 Hz)
A12--CIB/3DC3 INDUCTANCE BOX A12 – – – – – –
3 decades Copper coil wound on insulated core, without iron. Two connecting terminals and ground. Adjustment accuracy: stated at 1 KHz, between terminals: ±5% or better Decade steps: 10 x (0.01+0.1+1) H. Total inductance: 11.1 H Max current decade: 0.01 H/100 mA 0.1 H/50 mA - 1 H/25 mA.
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 03/04 Specifications may change without notice
Page - 5 -
File A12
A12--CCB/3DC2 - CAPACITANCE BOX A12 – – – – – – –
Polypropylene capacitor of non inductive foil construction. Two connecting terminals and ground. Tan N 0.003 at 1,000 Hz. Working voltage: 400 VDC max; 100 V switching. Accuracy ±2% or better. Decade steps 10 x (0.001+0.01+0.1H) µF. Total capacitance: 11.11 µF.
A12--CR CR--B/5DC1 - RESISTANCE BOX A12 – – – –
Resistors made of metal film Low temperature coefficient Long term stability. Contact resistance of the switches: less than 0.01L. – Power rating: 0.5 W. – Nominal accuracy: ±1% from DC to 1 MHz. – Decade steps: 10x(1+10+100+1K+10K)L. – Total resistance: 111.110 L. A12--TA 0,6/5 - CURRENT TRANSFORM TRANSFORMER ER A12 Class 0.5, primary current 10 ÷ 25 ÷50A, secondary current 5A, 5VA
A12--TV 0,6/20 – VOLTAGE TRANSFORMER A12 Class 0.5 – primary voltage 500 ÷ 1000V, secondary voltage 100V, 20VA
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 03/04 Specifications may change without notice
Page - 6 -
File A12
A12--SH – SHUNT FOR DC CURRENT A12 Class 1, 60mV, 500A max
A12 A1 2-RH – SET OF LINEAR RHEOSTATS – – –
4 types from 100 to 5000L, 1 to 2A. Supplied with scale and metal protective cover equipped with rubber feet. Values: 100L/1.25A 500L/0.36A 500L/1.1A, 1000L/0.57A
A12--CI/1B+CI/2B SWITCHES A12 Switch and Reversing Switch. For general use in measuring circuits. All the live parts are shielded.
A12--SLDA12 SLD-E/G GALVANOMETER Scale 30-0-30, 1µA/div, internal resistance 400L.
A12--SLD SLD--E/VCC – MILLIVOLTMETER A12 60Mv, Class 1
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 03/04 Specifications may change without notice
Page - 7 -
File A12
A12A12-5018 - TOOL KIT FOR ELECTRICIAN
Content: Content: 5 screwdrivers 39 assorted terminals 1 crimping pliers 1 12 – 14V tester 1 adjustable grip pliers 1 grip locking pliers 1 300g hammer 1 shim gauge 1 kit of terminals 1 case 360 x 430 x 100 mm
10 socket wrenches 1 ratchet extension 1 sparkplug wrench 1 hinge 2 extensions 11 inserts 1 adapter 1 “T” shaped magnetic handle 4 tubular hexagonal wrenches 8 combined wrenches
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 02/02 Specifications may change without notice INSTRUMENTATION).doc
page - 8 -
File
LEAFLET
A12
(ELECTRICAL
A12A12-986 GE/6 - TOOL KIT FOR ELECTRICAL LABORATORY
Content: 1 isolated flat noses pliers 180 mm 1 adjustable pliers 250 mm 1 roller wrench 250 mm 1 isolated scissors 1 electrician knife 1 hack saw with 10 blades 1 center punch 1 flexible measuring tape 2 m 1 tracing point 1 phase detector screwdriver 1 hammer 100 g 1 hammer 300 g 3 chisels 175, 200 and 250 mm 2 punches 2 and 4 mm 1 “automatic� punch 1 soldering iron with 3 accessories 1 carrying case
11 socket wrenches 1extension 100 mm 1 hinge 1 lever with sliding attachment 115 mm 1 ratchet lever 100 mm plastic handle for socket wrenches 12 wrenches 4 to 13 mm 4 double open ends wrenches 14 to 24 mm 9 hex key wrenches 2 to 10 mm 4 isolated screwdrivers 3.5 to 6.5 mm 6 cross tip screwdrivers 3 lever screwdrivers 5.5 and 8 mm 1 universal isolated pliers mm180 1 isolated cutter 180 mm 1 isolated half round noses pliers 180 mm 1 isolated wire stripper pliers
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 02/02 Specifications may change without notice INSTRUMENTATION).doc
page - 9 -
File
LEAFLET
A12
(ELECTRICAL