Electron
S.R.L.
Design Production & Trading of Educational Equipment
A24 – ELECTRICAL INSTALLATIONS TRAINING SYSTEM
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 11/00 Specifications may change without notice
page - 1 -
File LEAFLET A24
A2410 - ELECTRICAL INSTALLATIONS WORK BENCH Bench Technical Characteristics:
Photo of A2410A2410-4 This two sided work panels and bench is designed to accommodate two or four students for practical exercises on electrical installations. Simple, strong and durable, built according to the IEC safety standards, the unit provides all the power sources needed for testing and operation of the circuits of our residential and industrial Trainers. Input power can be provided from the main line or from the distribution panel Model A0250. Output voltages are supplied through 4mm safety terminals and are fully protected against overload, short circuits and ground leakage by magneto-thermal and differential switches. The unit is activated by a key operated switch.
Accurate construction, made in Italy. Provides the necessary working area for the various training modules. Bi-laminated wood conglomerate top, 20 mm thick. Color is white (other colors on request). Approx Dimensions 1000 x 750 x 800 mm (LxWxH) Possibility to optionally mount 1 or 2 drawers with lock, 1 or 2 optional chest of drawers and one cabinet with 1 drawer and 1 shelf. The cabinet can be optionally equipped with 4 wheels. Possibility to mount anti-noise and height regulating feet.
Optional Features: A2410 AT Acoustic circuit tester A2410 410 DC Output 10-12-24 V DC, 4A, A2 unfiltered A2410 DR 1 or 2 optional drawers with lock. A2410 CH 1 or 2 optional chest of drawers. A2410 CA Cabinet with 1 drawer and 1 shelf. A2410 RF Anti-noise and height regulating feet.
Optional Units and Trainers: A2420 Panel for residential installations (780x860 mm) A2430 Panel for industrial installations (780x860 mm) A2440 Panel storage cupboard (suitable to store up to 6 panels),, closed, with 2 key-locked wings A2421 Residential installation kit A2422 Tools kit A2431 Industrial installation kit
Each side of the unit has the following features: L1, L2, L3, N, GND outputs 2 Shuko outlets 220 V, 10 A 10-12-24 VAC, 4 A output Mains indicator lamp Low voltage indicator lamp Continuity tester with indicator lamp
TECHNICAL AND ORDERING INFORMATION Model N.
N. Students
A2410--2 A2410 A2410A2410-2A A2410--4 A2410 A2410--4A A2410
2 2 4 4
Power Requirements 220/380V, 3 127/220V, 3 220/380V, 3 127/220V, 3
Phase, 50Hz (*) Phase, 60Hz Phase, 50Hz (*) Phase, 60Hz
(*) 230/400 or 240/415V to be specified on order
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 11/00 Specifications may change without notice
page - 2 -
File LEAFLET A24
A2421 - RESIDENTIAL INSTALLATION KIT The trainer includes all typical components used in domestic applications. All components can be easily mounted in our benches A2410/2 (two places) or A2410/4 (four places) provided with the panels A2420 or equivalents. The experiments that can be performed include: Light control from one point Light control from two points Light control from three points Light control from four points Light control by relay Two lamps control by commutator Light control by time relay Buzzer control from 3 points Intercom circuits
The components included are: 1 pole, one way switch Lamp holder 10/16 A socket 1 pole, two ways switch Reversing switch Push buttons Switch relay Commutator relay Timer Fluorescent lamp Buzzer Call panels Intercom system Electro lock
Q.ty 2 Q.ty 2 Q.ty 2 Q.ty 2 Q.ty 2 Q.ty 7 Q.ty 1 Q.ty 1 Q.ty 1 Q.ty 1 Q.ty 1 Q.ty 1 Q.ty 2 Q.ty 1
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 11/00 Specifications may change without notice
page - 3 -
File LEAFLET A24
A2421A2421-D - RESIDENTIAL WIRING TRAINER The Trainer is designed to teach residential electric wiring by showing a typical apartment layout on a wooden exercise board, its electric requirements on a work sheet diagram and by providing a set of components to implement such requirements.
Standard electrical components are used: they are fastened on the board by means of screws and wiring can be performed, at the user's choice, on the board front surface or on the rear. In the latter case holes must be drilled across the board to make passage for the wires.
The student is requested to understand the apartment layout and the electric diagram, choose the correct components, fasten them in the correct positions of the exercise board, connect them and demonstrate the resulting circuits.
At the end of the session the components are removed from the board and stored for future exercise sessions.
The circuits are powered at 24 VAC through thermal and differential protections, a stepdown transformer, an energy meter and from 220/240 VAC mains.
COMPONENTS NENTS COMPO
Q.ty
Energy meter Step-down transformer Magneto-thermal protection Differential protection Single phase + ground socket outlets Single phase switches One pole, two way switches Reversing switches Pushbuttons
The user can, if he wishes, design different electric diagrams for enriching the exercise set and satisfying additional training requirements. The board is mounted on a stand that allows adjusting its inclination for ease of working and demonstration.
COMPONENTS
1 1 1 1
Q.ty
Buzzer 1 Lamps 11 Wires (2 wires+gnd) 100 m PVC tubing 50 m Relay 1 Exercise manual showing typical exercises and related circuits diagrams 2 Board 1
18 9 5 2 3
Picture of a typical implementation
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 11/00 Specifications may change without notice
page - 4 -
File LEAFLET A24
A2422 - WIRING ASSEMBLY ASSEMBLY TRAINER This trainer has been designed for developing skills in clipping, bending and setting of surface or conduit mounted wires and cables for electric wiring.
A2422C A2422F A2422L A2422M1 A2422M3 A2422S
It consists of an assembly frame and a series of kits for different applications as follows:
Conduit Wiring Kit Wiring Assembly Frame Lighting Wiring Kit 1 Phase Motor Wiring Kit 3 Phase Motor Wiring Kit Surface wiring Kit
A2422C - CONDUIT WIRING KIT For practicing installation using PVC conduits in concealed conditions with different wiring circuits.
two sockets with ground two switches one pole two switches one pole two-ways two staircase switches (push buttons) one intermediate switch (one pole reversing) one lamp socket one buzzer one step-down transformer, secondary voltage 24V. installation plan with wiring diagram installation instruction manual instrument and material box
The kit contains: – –
PVC tubing approx. 15 mm diameter, 10m jointing sleeves for PVC tubing 15 mm diam. 10 pcs – 90 degrees bents, 5 pcs – cables of following types: 2 x 0,7 sq. mm 10 m 3 x 1,5 sq. mm. 20m, 1 x 1,5 sq. mm (y/g), 1 x 1,5 sq. mm (blue), 100m 1 x 1,5 sq. mm (black) 1 x 1,5 sq. mm (white) 100m cable derivators: 25 pcs mains connector (1ph + N + GND) plastic connection - distribution box: 5 pcs
The trainer is designed to be used with wiring assembly frame model A2420F.
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 11/00 Specifications may change without notice
page - 5 -
File LEAFLET A24
A2422F - WIRING ASSEMBLY FRAME Three boards with a metallic frame on which installation exercises are conducted for developing skills in wiring industrial type electrical components.
It consists of three boards each one 1000 x 2000 mm, 16 mm thick and with central strong hinges.
The frame is a free standing type and can be folded for storage.
A2422L - LIGHTING WIRING KIT For practicing in wiring of lighting control circuits with fluorescent and incandescent lamps. The kit consists of:
one fuse board with 5 x 10 A fuses one pushbutton one staircase relay one switch one photocell operated relay installation plan with wiring diagram installation/instruction manual instrument and material box.
cables:5 x 1,5 mm sq, 25 m; 3 x 1,5 mm sq,. 100 m cable derivations (10 pcs), clips (100 pcs) one box of wood screws (100 pcs) 2 plastic connection - distribution box The trainer is designed to be used with 4 incandescent and 4 fluorescent lamps wiring assembly frame model A2420F. 2 incandescent lamp holders and 2 fluorescent lamp holders with chokes and starters
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 11/00 Specifications may change without notice
page - 6 -
File LEAFLET A24
A2422M1 - SINGLE PHASE MOTOR WIRING KIT This trainer provides in a kit form all necessary parts and instructions for the execution of a practical, real implementation of a motor control circuit. All components are up to the latest technologies and standards requirements. A single phase motor is controlled through a wattmeter, a starter and protection fuses. Wiring is performed in conduits with a distribution box. The result is a very realistic reproduction of a real life environment.
The trainer consists of the following components: Single Phase Motor Wattmeter Starter Wiring Conduits Distribution Box Fuses and Box Accessories
A2422M3 - THREE PHASE MOTOR WIRING KIT This trainer provides in a kit form all necessary parts and instructions for the execution of a practical, real implementation of a motor control circuit. All components are up to the latest technologies and standards requirements. A three phase motor is controlled through a wattmeter, a starter, earth protection and fuses. Wiring is performed in conduits with distribution boxes. The result is a very realistic reproduction of a real life environment.
The trainer consists of the following components: Three Phase Motor Wattmeter Manual and Automatic STAR/DELTA Starters Direct Starter Pushbutton Box Earth Protection Wiring Conduits Distribution Boxes Fuses and Box Accessories
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 11/00 Specifications may change without notice
page - 7 -
File LEAFLET A24
A2422S - SURFACE WIRING KIT For developing skills in clipping, bending and setting surface mounted wires and cables, implementing circuit connection from a fuse board to single and three phase outlets, circuit breakers, controllers, etc.
fuse holders with 12 x 10 A fuses 3 single phase outlet 3 three phase outlets one motor protection switch pushbutton box installation plan with wiring diagram installation/instruction manual instrument and material box.
The kit consists of: cables: 5 x 1,5 mm sq. 25 m, 4 x 1,5 mm sq - 100 m clips: 150 pcs wood screw: 1 box (about 100pcs) cable derivations: 20 pcs fuse board for fuse holders (1 pc)
The trainer is designed to be used with wiring assembly frame model A2420F.
A2431 - INDUSTRIAL INSTALLATION KIT The trainer includes all typical components used in industrial applications. All components can be mounted in our benches A24.10/2 (two places) or A24.10/4 (four places) provided with the panels A2430 or equivalents. The experiments that can be performed include: Basic control circuits Direct-on-line starters, manual and automatic. Electrical and mechanical interlocks. Time delay switching. Star-delta starters. Speed reversing Protective circuits, overload relays The components included are: Three phase contactor Q.ty 3 Normally open auxiliary contactQ.ty 3 Normally close auxiliary contactQ.ty 3 Lamp socket diam. 22 mm Q.ty 3 Thermal relay Q.ty 2 Electronic timer Q.ty 1 Push Button diam. 22 mm Q.ty 3 SEE ALSO THE DESCRIPTION OF: B3729 - PLC TRAINER SYSTEM
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Rev 11/00 Specifications may change without notice
page - 8 -
File LEAFLET A24
A2480 - PLASTIC AND METAL SHEETS HAND PUNCH KIT This kit (factory code 760GN) contains a single-hand operated hydraulic gun and accessories for punching round holes in plastic and metal sheets. Can be used to build various kinds of works such as terminal boards and electric panels.
Technical Characteristics Metal sheets max. thickness: 3mm Force: 50 kN Weight: 2.4 Kg Length: 340mm Quick movement hardened steel, ergonomic handles
Before punching, a hole must be drilled that is used to guide the positioning pin. It can punch metal sheets up to 3mm thickness.
Components Hand Oil Pump Round Punches and Dies 15.2 – 18.6 - 20.4 – 22.5 – 28.3 and 30.5 mm 2 punch holder pins Carrying Case
Supplied in a carrying case.
Ordering Code A2480 Hand Punch Kit
Hand operated Punch Kit
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 Rev 9/04 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Specifications may change without notice
page - 9 -
File LEAFLET A24
A2481 - PLASTIC AND METAL SHEETS PEDAL PUNCH KIT This kit (factory codes 760GV/5, 760GV and 760GL) contains a pedal operated oil pump, a punch head and accessories for punching round holes in plastic and metal sheets to be used to build various kinds of works such as terminal boards and electric panels.
Technical Characteristics
Before punching, a hole must be drilled that is used to guide a positioning pin.
Punch Head – Metal Sheets Max. Thickness: 3 mm – Weight: 1.6kG – Length: 114mm
Particularly suitable for use up to 2m high from the floor, it has a 2m power tube, support plate and hardened steel operating parts.
Pedal Oil Pump – Maximum Oil Pressure: 450 Bar – Power Tube Length: 2m – Length: 340mm – Weight: 2.5 Kg
Kit Components Pedal Oil Pump Punch Head Round Punches and Dies 15.2 – 18.6 - 20.4 – 22.5 – 28.3 and 30.5 mm 2 punch holder pins
Ordering Code A2481 Pedal Punch Kit
Pedal Operated Oil Pump
Punch Head
Die and Punch (sample)
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 Rev 9/04 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Specifications may change without notice
page - 10 -
File LEAFLET A24
A2482 - PLASTIC AND METAL SHEET ELECTRIC OIL PUMP PUNCH KIT This kit (factory codes 760GV/8, 760GV and 760GL) is designed for power and fast punching round holes in plastic and metal sheets, to be used to build various kinds of works such as terminal boards and electric panels. The punch stroke is powered by an electric motor oil pump unit and is particularly suitable for extended use. The pump action is controlled by means of a pedal on the unit and is connected to the punch head by means of a 2.5m long power tube.
Technical Characteristics Electrical Oil Pump – Maximum Oil Pressure: 450 Bar – Power Tube Length: 2.5m – Dimensions: 260 x 140 x 295mm – Weight: 8.5 Kg – 220V single phase, 50Hz supply Punch Head – Metal Sheets Max. Thickness: 3 mm – Weight: 1.6kG Length: 114mm
Before punching, a hole must be drilled that is used to guide a positioning pin.
Ordering Code
Components
A2482 Electric Punch Kit
Electric Motor Oil Pump Punch Head Round Punches and Dies 15.2 – 18.6 - 20.4 – 22.5 – 28.3 – 33.0 – 37.0 and 43.2mm 2 punch holder pins
Electric Oil Pump
Punch Head
Die and Punch (sample)
ELECTRON S.R.L. VIA CASCINA TORCHIO I-26833 MERLINO (LO) ITALY - TEL. 39(Italy) 02(Milan) 9065 9200 Rev 1/01 FAX 9065 9180 - E-mail: electron@electron.it Web: www.electron.it Specifications may change without notice
page - 11 -
File LEAFLET A24