Navigation and main menu

Navigation within the entire menu structure is possible using 2 or 3

buttons on the control panel: the WARM , COOL buttons

and the MENU/SELECT button used to select the various menus

and navigate in each section. When the numbers flash on the display it

is possible to set the temperature using simply pressing the temperature

buttons. You can exit the menus by pressing a button. By simply waiting a few seconds for the control panel will return to normal mode. The

following diagram shows the main menus and how to navigate between

them:

Main display

Press Menu/Select.

TEMP MODE TIME 8:57 LOCK HOLD

Light Cycle if active

LITE TIMR

UTIL

Indicates a menu item that may or may not appear depending on the con guration of the manufacturer.

If the time has not been set, it will appear"SET TIME".

Schermata principale

After a few seconds of waiting, the display will return to the main screen. Some changes will not be saved until Menu/Select is pressed. Refer to the button indicated above.

Legenda

Change has been made in the system Progressive message- every 1/2 seconds Temperature button, used for "Action" Menu/Select button

Figure 3: main menu navigation scheme