Audi To Backfire on Acceleration in Santa Barbara
Reason Behind your
When the un-burned fuel ignites inside the exhaust manifold, it will cause backfiring.
Backfiring occurs in Audi due to system malfunction or avoiding maintenance.
Occurrence of strong backfiring in the engine will damage many components such as: • Broken exhaust manifold • Failed intake air temperature sensor • Cracked vacuum check valve • Reduced combustion process
Neglecting the issues will trigger the check engine light, so deal with them ASAP.
Below points define the reasons behind the backfiring on acceleration in Audi.
Issues in the injection system
In an Audi, the backfiring issues are commonly generated from the fuel system.
Due to the bad injector, un burned fuel enters into the exhaust system and causes backfiring on acceleration.
Leakage in the exhaust system
When the exhaust is backfiring, you will notice air leaks in the exhaust system.
A small leakage of oxygen through the exhaust manifold gasket will damage the: • Pipe • Sealing rings
Problems with the ignition system
A small problem in the ignition system will cause backfiring and reduce engine performance.
When the spark plug gap is widening, it will cause difficulty for the spark to jump.
Failed sensors
When the sensors fail, the computer will deliver too little fuel for the combustion process.
Failed sensors trigger the check engine light and cause backfiring on acceleration.
Damaged valve train
Exhaust valves need to open and close at the proper time to remove the exhaust gases.
A small problem in the valve spring will fail the valve for sealing the combustion chamber.
Conclusion
In general, diagnosing the backfiring on acceleration can be very difficult in Audi.
If you are living in Santa Barbara, then take your Audi to a reputed mechanic for diagnosing and fixing the backfiring issues.
https://sbautowerks.com/ https://www.facebook.com/Santa-BarbaraAutowerks-Inc-455768191174331/ https://twitter.com/SB_Autowerks
THANK YOU