Portfolio Sávio Jobim 2014 by Sávio Jobim

Portfolio

Sรกvio Jobim

Pedro Sávio Jobim Pinheiro University of São Paulo (USP)

professional experiences:

academic experience: _scholarship to interchange _Internship at Isay Weinfeld programme at Hogeschool van Architecture [jan.2015 - now]; Amsterdam [2013]; _Research project at USP “The _Internship at Triptyque Architecture designing process of a sustainable [dec.2014 - now] building“, professor Sheila Walbe Ornstein [2011/2012]; _Internship in lighting design at _Architecture Office Management Royal Philips Electronics [may 2014 course - Senac [2012] - dec.2014]; _exposer at Brazilian Week of Sci.development of the lighting ence and Technology [2008] and design of two Oscar Niemeyer Brazilian Fair of Science and Techprojects in Niteroi and Brasilia nology [2007] _dialux EVO course [2014]

habilities: _autodesk revit architecture 2015 _autodesk autoCAD 2015 _google sketchup _vray render _dialux Evo _3D studio max (basic) _adobe Photoshop/Indesign _Physical modelling languages: _inglês (fluent) – TOEFL level 101 _francês (fluent) - DALF C1[2010]_ espanhol (intermediate)

contact: savio.jobim@gmail.com +55 (11) 95208 0003 Victor Brecheret st, 520, ap. 3AT8

prizes: _First Honorable prize in

Sustainable Building International Award, Spain, 2013. _Engineering Inspiration and Industrial Safety in FIRST Robotics Competition Brazil [2007]; _EMBRAPA Prize, in Brazilian Fair of Science and Technology – FEBRACE [2008]; _3º place in Social Sciences, FEBRACE [2008].

housing, offices and public equipment [S達o Paulo] vertical city, horitontal city developed with: Felipe Barradas Marco Scriboni

The design of housing+offices tower, together with a public equipment is included in the double population density policy of the center of Sao Paulo and diversification of plot occupancy modes, as set out in the new Master Plan of S達o Paulo (2014) . The project responds to these demands by two separate buildings: the public service building establishing a horizontal landmark in the center of the vertical city; and the housing+offices building, which composes more directly with existing verticality of the surroundings. The space between the buildings set up a large scaled public gallery, which accentuates the recreational potential of the center of S達o Paulo, usually fordibben or neglicted.

? edificações existentes

756 754.3

756

marco respeitoarquitetônico aos edificações demolição edifícios demolidos eexistentes ao marco arquitetônico

754.5

área técnica

marco arquitetônico edificações demolição existentes

754.5

b 757.5

754.5

756

respeito marco arquitetônico aos demolição edifícios demolidos e ao marco arquitetônico

b 757.5

757.5

respeito marco arquitetônico aos edifícios demolidos e ao marco arquitetônico

756

757.5

respeito aos edifícios demolidos e ao marco arquitetônico

756

757.5

756

757.5

depósito

carga e descarga

pavimento administrativo

edificações demolição existentes

b 752.7

10m

planta pavimento administrativo 0

10m

planta pavimento administrativo 0

10m

planta pavimento de atendimento planta pavimento administrativo 0

10m

planta pavimento de atendimento 0

10m

planta pavimento de atendimento 0

planta pavimento de atendimento

10m

corte urbano

corte aa

corte bb

buildings plan 1:1000

planta edificações

0 2

modelo físico

20m

modelo físico

concurso internacional VIVIENDA concurso EN RED internacional SP 14 VIVIENDA concurso EN RED internacional SP 14 VIVIENDA concurso EN RED internacional SP 14 VIVIENDA EN RED SP 14

751.5

750

Vivienda en red é estar conectado à cidade e a espaço É a casa e sua interdependência com outras casas e as pesso

A distinção morfológica proposta entre edifício vertica horizontal (Poupatempo + galeria comercial) reflete a clareza projeto, abdicando de uma forçosa continuidade da forma urb O projeto reconhece a necessidade e importância da

754.5

construção de vazios no tecido urbano. Estabelecendo um marco horizontal, o adequação ao terreno

gallery plan h1:1000

percurso visual

planta galeria comercial 0 2

20m

contrapõe a verticalidade da região e revela uma clareira v potencial espaço de encontro exaltado pelo Edifício Renat referência urbana e marco histórico da arquitetura moderna p Viver em rede é traduzido no projeto como uma forma e apropriar-se do ambiente urbano.

materialização de viver em red módulos flexíveis, apoiando-se em um volume vertical A

os balanços e até mesmo os vazios formados pela justapos módulos habitacionais e de serviços permitem relações múltip

Cálculo das áreas Local

Área (m²)

Terreno 1 Terreno 2 Coeficiente de Aproveitamento

2722,89 1100,91

Total

15295,2

A independência estrutural entre edifício e módulos de

flexibilidade na ocupação, já que permite-s

espaços privados de acordo com a necessidade dos ocupant

Tipologia de Ocupação Área (m²)

habitações

Poupatempo comércio

proposta

Residencial/Serviços

6906,25

Comercial Poupatempo Praças

405,00 1762,43 4517,03

Área Total Construída 13590,71

organização funcional

distinção morfológica

urban section 1:1000

adequação ao terreno

amizades

trabalho

individualidade

housing+offices and public equipment [São Paulo] vertical city, horizontal city

social

individuo

relacao social

servicos

sociedade = rede

servicos

individualidade

amizades

trabalho

amizades

individualidade

amizades

individualidade

trabalho

amizades

trabalho

social

materialização

spatial units

external structures suporte

individuo

assembly process construção

individuo

The housing building inserted into the larger project of Housing+Offices and public equipment in downtown São Paulo proposes a constructive method that sets the existence of an external structure , responsible for the overall stability of the building, and a secondary structure that is characterized by multifunctional spatial modules. relacao social

e = rede

social

Each 4.5x4.5m spatial module represents a possibility of occupation: business rooms, living rooms , studios, bedrooms, balconies. Within the modules, sub-modules consisting of 1.5x1.5m blocks focus the hydraulic and electrical infrastructure, making it a more flexible construction to new uses that may arise.

sociedade = rede

relacao social

circulação vertical

trabalho

amizades

servicos

no pavimento 4, João e Maria, casados,individualidade vivem ao lado de Dora, solteira

sociedade = rede

relacao social

no pavimentos 13 e 14, a família Silva aluga o andar de cima para o escritório de Geraldo

social

rhythm of the facade configuração individuo

sociedade = rede

o duplex dos pavimentos 7 e 8 é a nova aquisição da família Souza

individuo

relacao social

sociedade = rede

studio to couples

studio to couples +

vertical circulation in a

two bedrooms apart-

kitchenette

rigid concrete block

ment + offices

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

materialização do viver em rede

RODUCED BY AN AUTODESK EDUCATIONAL PRODUCT Vedação em vitrine para módulos comerciais

4 CUDORP LANOITACUDE KSEDOTUA NA YB DECUDORP

interchanging boards: .glass .perforated aluminium .concret

1. perfil U em aço 2. steel deck 3. viga metálica perfil I com furos 4. piso acabado 5. acabamento externo 6. placas intercambiáveis 7. guardacorpo 8. placa cimentícia side facilities

steel deck floor

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCTEDUCATIONAL PRODU PRODUCED BY AN AUTODESK

connections

TCUDORP LAPRODUCT NOITACUDE KSEDOTUA NA YB DECUDORP PRODUCED BY AN AUTODESK EDUCATIONAL

Unidades hidráulicas associativas

um módulo de vivência é um espaço de 4.5m x 4.5m que pode abrigar usos habitacionais ou comerciais. Cada unidade é distinguível enquanto célula e se articula com as demais por meio de uma rede, materializada pela estrutura externa. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

Sub-modulação 1.5m x 1.5m

ções

cada módulo é dividido em submódulos de 1.5m x 1.5m, que permitem diferentes configurações de vedos e aberturas. Analogamente, a cada módulo podem ser associadas unidades de serviço que, em conjunto, configuram diferentes espaços às necessidades dos usuários. há 4 tipos de vedos modulares: placa cimentícia (cega); placa metálica perfurada, placa transparente em vidro; e guarda-corpo também em vidro.

secondary structure in I profile steel

submodules 1.5m x 1.5m

Associatives hydraulic submodules

Glass panels for offices and commercial modules

three bedrooms apartment

cube house

ergonomy in little spaces

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED PRODUCT BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED PRODUCT BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

cube cover

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT optimization of free space

90cm

openings for ventilation and difuse ilumination

increase of study space

70cm

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 90cm

70cm

food preparation openings with accordion doors

storage

washing machine

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

living cube

study and leisure

90cm 70cm

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

pedro sรกvio jobim pinheiro

0.5m

2m floor plan level 1 1:25

PRODUCED AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BYBY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

food storaging and preparing

access to superior floor and intimate space

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

relaxing

social space

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED PRODUCT BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED PRODUCT BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL

intimate space

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

living cube

The challenge of designing your own home in a 4x4x4m cube was the theme of this project, which aimed to synthetic analysis of the concept of living through the abdication of named spaces - kitchen, bedroom, living room, etc. The project was developed from the repertoire of domestic activities , which are grouped according to the degree of privacy . Developed the intimate and social centers, the activities are combined, in order to configure two different environments:

90cm 70cm

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

increase of study space

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

optimization of free space

90cm 70cm

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 90cm

70cm

1. private, home to all sanitary and hygienic functions; 2. social environment , which extends out to a possible external area.

food preparation

a aa

storage

washing machine

0.5m

2m floor plan level 1 1:25 floor level 2 1:25 floor planplan level 2 1:25

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY BY AN AN AUTODESK EDUCATIONAL PRODUCT PRODUCED AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

living cube living cube

pedro sรกvio jobim pinheiro

b bb

pedro sรกvio jobim pinheiro pedro sรกvio jobim pinheiro

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

section b

electronic model

section a

The master bedroom is located at the lowest level and orientated to the north side. It is directly connected to the living space, which consists of the living room and the kitchen. You can enter the deck from the living room by sliding open the panels and create an open space.

vn.

The villa will partly be built with traditional materials, which are found in the environment. Constructive walls will be made of concrete and finished with white stucco plaster. The roof will be made of ceramic tiles, like the houses in the area. Aluminum is used for the perforated facade at the south side as well as for the shutters at the east and north side of the villa.

The villa will partly be built with traditional materials, in the environment. Constructive walls will be made of concrete and finished with white stucco plaster. south elevation The roof will be made of ceramic tiles, like the houses in the area. Aluminum is used for the perforated facade at the south side as well as for the shutters at the east and north 1 2 3 5m side of the villa. which are found ELEVATION

casa Jijona [Alicante]

ELEVATION

south elevation

First Honorable prize in Sustainable Building International Award, Spain, 2013. Developed with: Devin Wesselius, Sven Berg, Lynn Ewalts, Wouter Hesterman

south elevation

10300

11600

first floor plan (above) ground floor plan (right) The entrance to the villa is a staircase on the highest part of the site. One level down there is the front door to the building itself. Here are the flexible working spaces located. These rooms can be easily transformed in multiple guest rooms. At this floor is a bathroom located, which you can enter from two directions.

4000

impression interior

PLANS

4200

perspective of the ground floor 2 3 5m

ELEVATION

south elevation

10300

11600

4200

10300

11600

4200 10300

4000

first floor plan (above) ground floor plan (right)

1500

PLANS

10000

4200 WM

11600

10000

impression used materials 10300

PLANS

9600

4200

first floor plan (above) ground floor plan (right)

PLANS first floor plan (above) ground floor plan (right) 2

casa Jijona

5m first floor plan

pedro sávio jobim pinheiro

planta pavimento inferior h1:500

4200

ground floor plan

pedro sávio jobim pinheiro

10000 WM

10000

PLANS

11600

first floor plan (above) ground floor plan (right)

4200

4000

9600

1500

planta pavimento superior 1:500

impression used materials

This sustainable house represents a series of investigations in order to give environmental comfort and energy efficiency in hot and arid environments. The house is configured as a scaling due to the natural slope of the land , giving different perspectives and organizing social and private spaces of the users. The double coverage serves as an air filter and provides constant ventilation to every room in the house. 4000

4000

1500

impression used materials

(4 bedrooms x 2) +1 = 9 people, 9x 2 showers showers/day Used dater volume = 360l Average external temperaure: [36 + 17.7]/2 = Average humidity: 62.3%. Temperature = 9.15oC (4 bedrooms xamplitude: 2) +1 = 9 Apeople, 9x 2 showers Result: the Used housedater is healthy comfortable showers/day volume and = 360l

9600 day = 18 per

26.8 per day = 18 for users.

Average external temperaure: [36 + 17.7]/2 = 26.8 Cold water temperatura Average humidity: 62.3%.= 20oC Stored wateramplitude: temperature 45oC Temperature A == 9.15oC Used water = 40oCand comfortable for users. Result: the temperature house is healthy Jijona “Irradiación Global Media” (Ig) in winter = 2.5 kWh/m2 [Agencia Estatal de Meteorología] Cold water temperatura = 20oC Stored water temperature = 45oC Stored water volume: Vstw = [Vuw (Tuw - Tcw)]/(Tst - Tcw) Used water temperature = 40oC Vstw = “Irradiación [360 (40 - 20)]/ (45Media” - 20) (Ig) Vstw in = 288l Jijona Global winter = 2.5 kWh/m2 [Agencia Estatal de Meteorología] Estimated population in the house: Pe = 9 water x 0.7 volume: [coeficient accupation] Pe = 6.3 people Stored Vstw of = [Vuw (Tuw - Tcw)]/(Tst - Tcw) [~7people] of used day: Vuw = 288l x 6.3 Vuw Vstw = [360 Volume (40 - 20)]/ (45water - 20)per Vstw = 288l = 1814.4lNeeded Energy: En = Vstw x 0.001163 x (Tarm - Taf) [KWh/day] population En = 8.37KWh/day Estimated in the house: Pe = 9 x 0.7 [coeficient of accupation] Pe = Area of theVolume water of heating system: = [(En [~7people] used water perA day: Vuw+ x Ig) A En = 6.04 m2 x 0.001163 =4.901)]/(3.1247 1814.4lNeeded Energy: = Vstw Result: 3 En x 2m2 solar panels. [KWh/day] = 8.37KWh/day

6.3 people x Fi x =El) 288l x 6.3 Vuw x (Tarm - Taf)

Possibility: Internal walls; External walls; Roofx composiArea of the water heating system: A = [(En + El) Fi x tion; A = 6.04 m2 (3 xA 2m2 solar 4.901)]/(3.1247 x Ig) = 6.04 m2 panels) Result: 3 x 2m2 solar panels. Possibility: Internal walls; External walls; Roof composition; A = 6.04 m2 (3 x 2m2 solar panels)

4200

9600

4200

1500

impression used materials

1500

ELEVATION

9600

4200

FAU Archive Contest

Digital Memory Pavilion developed with : Carolina Miki, Larissa Oliveira, Tadeu Baltar.

The proposed project for the FAUUSP Archive building reveals two elements that have long ago lost visibility in FAUUSP - the library projects and the stream that has been channelled to build Artigas building. Its materiality in steel and glass contrast with the exposed concrete texture FAU-USP, still proposing a permeable and accessible ground,

covered by a delicate marquise steel structure supported on slender metal columns. Associated with the pillars, interactive dashboards allow usersâ&#x20AC;&#x2122; interactions with the archive. The main block is comprised of two levels below the ground, both enveloped by a glass skin that delimits the climate-controlled area, protected from the weather. Its entrance is marked by a walkway, the consultation room and the

reception, which controls access to the collection and removal of items. The first basement includes the areas of collection and consultation, set back from the ground to ensure proper protection of the sunlight that environment demand. In the second basement, set up the restoration conservation areas and technical processing, the area inside the glass block, and a cafĂŠ and pleasant environment for visitors.

implantação 0

1 1

IME

1 - galeria coberta 2 - circulação vertical

RAMPA

3 4

FAU

1 - banheiros 2 - guarda-volumes 3 - circulação vertical

primeiro subsolo 0

1 1

4 - administração 5 - galeria 6 - área de consulta

7 - arquivo em estantes 8 - arquivo em mapotecas

3 4

segundo subsolo

1 - banheiros 2 - serviços 3 - circulação vertical

4 - copa cafeteria 5 - processamento técnico 6 - conservação/restauro

housing in São Paulo downtown [SãoPaulo]

occupying the emptiness

Developing a housing project in a plot of 4 meters large and 72 meters deep in front of the São Paulo cathedral, that was the challenge proposed to the housing+office buildings. Aligned with the proposed densification of São Paulo downtown, with the elimination of urban voids , the project proposes an internal square in the center of the block and with large common areas . The whole project consists of two buildings: the building facing the Cathedral Square , which can house services or studios, due to the increased visibility and proximity of noise sources , and the building facing Rua Quintino Bocayuva, at the other side of the plot, that dut to the different urban configuration , home to the largest housing units. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

750

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

755

760

Sé

760

insertion in the urban fabric 1:10.00

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

aup 152 habitação social - proposta

housing in Sé Square

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATION

corte urbano aa 1:500 0

40 section aa scale 1:500 pedro sávio jobim pinheiro

plan of first five floors 1:500 PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT AN AUTODESK EDUCATIONAL PRODUCT

a a

plan of upper floors 1:500

requalification - Winterthur [Amsterdam] former office building into housing, Amsterdam

The commercial building Winterthur was at an advanced stage of degradation. The retrofit design of the building into housing use included the adaptation of comeriais units to the new use as well as

the criation of new spaces of public and condominium leisure. The components included in the design were thought to upcycling , which means that they can be disassembled and used analogously

ground floor plan 1:750

in another buildings later. This constructive flexibility makes the building available to house other uses later on and offers the possibility of the user to configure the housing spaces according to his/her own needings.

first floor plan esc. 1:750

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

section A 1:100

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

4 7

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

5 5

6 1

1 7

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

7 14

details 1:20

Detail 3 (above) Detail 4 (middle) Detail 5 (below) Detail 3 (above) scale 1:10 Detail 4 (middle) Detail 5 (below) scale 1:10

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

7 14

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

detailed section 1:100

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

7 1 PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

8 PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

11 8

8 PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

5 2

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

hydraulic pre-fab modules

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

sun studies9 8 1. summer 10h 2. summer1114h 8 3. winter 10h 11 4. winter 14h

1. Concrete structure 2. Steel Frame I profile 3. Insulation fiberglass 130mm 5 1. Concrete structure 4. Brickwork (facade) 2. Steel Frame I profile 5. Wood 7 3. Insulation fiberglass 130mm 6. EPS high density 30mm 4. Brickwork (facade) 7. Plaster 5. Wood 8. Aluminium window 7 13 6. EPS high density 30mm 9. Steel Truss Plaster 6 10. 7. Single glass panel 8. Aluminium window Doble glazed panel 13 1 11. 9. Steel Truss Isokorf 6 12. 10. Single glass panel 13. Concrete core activation Doble glazed panel 1 14. 11. Aluminium plate 12. Isokorf 15. Perforated steel panel 1 13. Concrete core activation 16. Gutter 14. Aluminium plate 15. Perforated steel panel 1 16. Gutter

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

section B 1:100

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

facade multiple configurations Concept of the facade dynamics

lighting design_Caminho Niemeyer [Niter贸i]

Bringing the beauty of Niemeyer curves from the darkness [expected to be implemented in 2016]

Bring the beauty of Niemeyer curves for Niter贸i nightlife was the main goal of this lighting installation project. The project includes projectors for general lighting of the buildings

and embedded luminaires in the floor of the central square . While during the day , the lights embedded in the floor little interfere in the landscape, at night they offer several possibilities of public space use, without affecting the

original architecture. Besides, allows the realization of public events also at night, which is a rare nowadays. The entire project was thought to omit the light sources so as to minimally interfere in the architecture.

experimental models

Moving Cubes Expo 92 Pavilion, by architect Marcos Acayaba developed with : Ana Costa, Ana Ramos, Bruna Mirabile, Denise Moreira, ThaĂs Bianchini

The exploration of different possibilities of articulation wa the goal of the model, which consists of cubes that rotate , resulting in several opening possibilities to architecture.

dynamic pavilion exploring different junctions and movements to configure new spaces

The model below is part of a study to restore the work of Mark Acayaba, ont of the most important brazilian architects.

general model of Sevilla Pavilion

thank you.

I dedicate this small portfolio to all my friends and family, especially to Guilherme Miguel Bullejos, for understanding and supporting me.