Bracelet “Regalia” by ScaraBeads

Designed by Piratchada Thongra-ar, 2016 Copyrights © 2016 by ScaraBeads www.scarabeads.com, scarabeads.etsy.com

- 13 pcs. Pony Bead 5.5mm – Mix Half Color/White Luster - 12 pcs. Pinch Bead 5x3.5mm – Pastel Mix - 24 pcs. Czech Fire Polished Round 4mm – Transparent Brown, Amethyst Picasso, Two Tone Green Yellow - 48 pcs. Czech Fire Polished Round 3mm – Chalk Blue Luster, Transparent Brown, Opaque Green Luster - 2g. 10/0 Czech Rocailles seed beads – Opaque Denim Mix - 1g. 10/0 Czech Rocailles seed beads – Metallic Orange - Nymo Thread D or your favorite thread.

- Beading Needles - Jumpring - Clasp

2

- 13 pcs. Pony Bead 5.5mm – Mix Half Color/White Luster - 12 pcs. Pinch Bead 5x3.5mm – Pastel Mix - 24 pcs. Czech Fire Polished Round 4mm – White Opal - 48 pcs. Czech Fire Polished Round 3mm – Pale Turquoise - 2g. 11/0 Czech Rocailles seed beads – Opaque White - 1g. 11/0 1/0 Miyuki Rocailles seed beads – Matte Opaque Turquoise Green #412FR - Nymo Thread D or your favorite thread.

- Beading Needles - Jumpring - Clasp

3

Abbreviation - 10/0 seed bead, Opaque Denim = 10/0A - 10/0 seed bead, Metallic Orange = 10/0B

Cut the thread at your comfortable length. Pick up pony bead, three 10/0A, 10/0B and three 10/0A.

Pass through pony bead (red arrow) and the first 10/0A (blue arrow).

Leave the tail around 4 – 5 inches, use your other hand to hold the tail.

4

Pick up two 10/0A, 10/0B and two 10/0A.

Pass through the last 10/0A (red arrow), pony bead and 10/0A (blue arrow).

5

Pick up pinch bead, 10/0A, pony bead, three 10/0A, 10/0B and two 10/0A.

Pass through 10/0A between pinch and pony (red arrow).

Continue through pony and 10/0A (blue arrow). Use tight tension and pull all those core beads in the center line close together.

6

Pick up two 10/0A, 10/0B and two 10/0A.

Pass through 10/0A (red arrow), pony and 10/0A (blue arrow). Use tight tension and try to pull the beads close together.

7

Repeat step 2 until you get the desired length. Don't worry if your two wings of 10/0s flap, we will correct that later.

At the end, exit at 10/0B (red arrow).

8

Pick up three 10/0B. Pass through 10/0B (red arrow) and 10/0A (blue arrow).

Pick up 10/0A, czech 4mm and 10/0A. Pass through 10/0A and 10/0B (red arrows).

9

Repeat step 3 to the other end. Exit at the second 10/0A (red arrow).

Pick up three 10/0A. Pass through 10/0A (red arrow), the next 10/0A and 10/0B (blue arrow).

10

Pick up three 10/0B. Pass through 10/0B (red arrow) and 10/0A (blue arrow).

Pick up 10/0A, czech 4mm and 10/0A. Pass through 10/0A and 10/0B (red arrows).

11

Repeat step 4 all the way to the end. Exit at the second 10/0A (red arrow).

Pick up three 10/0A. Pass through 10/0A (red arrow).

Continue through the next 10/0A and two 10/0B (blue arrow).

12

Pick up 10/0A, czech 3mm, 10/0A, czech 3mm and 10/0A. Pass through 10/0B (red arrow). Continue through the next two 10/0B (blue arrow).

Repeat step 5 to the other end.

13

Pass down through 10/0s and exit at 10/0B (red arrow).

Pick up 10/0A, czech 3mm, 10/0A, czech 3mm and 10/0A. Pass through 10/0B (red arrow) and the next two 10/0B (blue arrow).

14

Repeat step 6 to the end. You can finish off the thread now.

Add jumpring and clasp.

15

Designed by Piratchada Thongra-ar, 2016 Copyrights Š 2016 by ScaraBeads www.scarabeads.com, scarabeads.etsy.com All right reserved by ScaraBeads.

No part of this tutorial may be reproduced or transmitted in any form or by any means without written permission from ScaraBeads.

16