CA_LFTHY

Luci SHIN FLEX THOF®

Luci SHIN FLEX THOF

LFTHY

Ito-Yokado Abeno

Location: Japan

Architect office: Yoshichu-Mannequin GRID

Construction: Yoshichu-Mannequin

Lighting Design: Luminous

En WEDDING chapel

Location: Japan Architect office: lab.co.ltd

Construction: GF.inc

Photograph from: Queserser & Company

Specifications

Dimensions

Cross section W 15 x H 4.5 mm

Custom order up to 5m lengths at every unit length with both ends or one end feed cable

Cuttable luminaire at site at scissor mark. If a luminaire with a both side feed cable is cut, the left and right sides of the luminaire can be used separately, as if the luminaire were one side feed. Electrical & Output @5000K

- Recommened distance

Customisable up to 5M now

For tunable white or Dim-to-Warm application

Arranging 2 colors of LED package alternately Free to select 2 CCTs from 9 CCTs

Karumaru Ikebukuro

Location: Japan

Archilecl office: Hashimoto Yukio Design Studio Inc. Lighting design: Illumination of City Environment,Ltd.

Photo: Nacasa & Partners Inc.

TOKYO MIDTOWN HIBIYA

Japan

- Customisable up to 5m

- For tunable white or Dim-to-Warm application

- Arranging 2 colors of LED package alternately

- Free to select 2 CCTs from 9 CCTs

Model No.

Specification

LED pitch 7mm pitch

No.

Fitting length

Cuttable unit

General specification

Input voltage DC24V

Environment Indoors (no condensation)

Max. length per circuit 5m

Min. bending range R50mm

Material Soft acrylic

Attachments End cap 2pcs

Accessories Mounting rail Mounting clip Mounting parts End cap Magnet

Certification CE, PTB FREE

Dimmable Yes (Tunable white driver is required)

Custom order length

Luci SHIN FLEX THOF / One end lead wire

Luci SHIN FLEX THOF / Both ends lead wire W S

MacAdam 3 step

LFTHY7 : 7mm

Model No : LFP-RL1000-AL

Model No : LFP-RC

Model No : LFP-PT Model No : LFP-EC

○ = Device inventory

＊ = Please contact us since it is made-to-order products .

Illuminance data Color

6500K~2000K

6

10

2

Light source color 3500K equivalent N:100%, L27:100%

Brightness 99 cd

Luminous flux 315.9

4

15

LFTHY7-T1000-NL27-CL-I-

LFTHY7-T1000-NL27-CL-I-

LFTHY7-T1000-NL27-CL-I-

LFTHY7-T1000-NL27-CL-I-

LFTHY7-T1000-NL27-CL-I-

Installing the product

Straight installation

Mounting rail 1000 for Power FLEX

Mounting rail 1000 for Power FLEX (LFP-RL1000)

推奨取付位置

Aluminum mounting rail 1000 for Power FLEX (LFP-RL1000-AL)

Pan head screws M3 recommended.

Mounting rail 1000 for Power FLEX (LFP-RL1000)

推奨取付位置

Magnet set for rail (MG-R)

Straight installation by 45 degree rail

推奨取付位置

45°Mounting rail 1000 for Power FLEX (LFP-45RL1000)

Pan head screws M3 recommended.

推奨取付位置

Curved installation

Mounting clip for rail (LFP-PT )

For downward installation, mounting clips for rail can prevent falling.

Recommended: 5 pcs per 1 m

* In case of Aluminum mounting rail 1000 for Power FLEX, Mounting clip for rail is not necessary.

Aluminum mounting rail 1000 for Power FLEX

Aluminum mounting rail 1000 for Power FLEX (LFP-RL1000-AL)

推奨取付位置

Magnet set for rail (MG-R)

lighting

Mounting clip for rail (LFP-PT )

For downward installation, mounting clips for rail can prevent falling.

Recommended: 5 pcs per 1 m

Minimum bending radius

Mounting clip for Power FLEX (LFP-RC)

Pan head screws M3 recommended.

Cutting of lamp fitting

Cuttable unit : 14 LED

The cuttable unit of Luci SHIN FLEX THOF is 14 LEDs.

Cutting the light fixture at the wrong point may cause failure or a non-lit. End caps are required to seal the open end of the light fixture after cutting. Acrylic adhesive is recommended. Do not solder cables to the circuit board of the cut light fixture.

System configuration diagram

②

③ Cable length betwee PSU and the begining of illuminaire (m)

① Max. connectable length per PSU

2.1

① Total product length per PSUdepends on capacity of the PSU. Recommended loading factor is 70% ( without dimming ) or 60% ( with dimming ).

② Product length per circuit shall not exceed maximum product length per circuit. If the product length per circuit exceeds the maximum, split into mulitple circuits.

③ To minimize voltage drop, select appropriate wire gauge / diameter and consider the cable length between PSU and the begining of luminaire referring to the following table. If longer cable distances are required, use thicker wires or reduce the loading of the light fixtures in the circuit.

Specification

Product name 12-24VDC 0-10V analog constant voltage led dimmer

Model number DIM-S2L8V-0

Input voltage 12V - 24V

Output channel 2ch total 8A

Size 167*51*23(mm)

Weight 100g

Usage enviroment Indoor(no condensation)

Oparating enviroment temprature -20℃ 〜 70℃

Specification

Product name Multi-Function

Model number Walldim202

Input voltage 12V - 15V

Output channel 50mA 2ch Size 86*86*26(mm)

Weight 140g

Usage enviroment Indoor(no condensation)

Oparating enviroment temprature -10℃ 〜 40

* Please read and follow the specification and the instruction manual issued by the manufacturer of controller and driver. The specification may be subject to change without prior notice.