HOUSE LE ROUX

DN

HOUSE LE ROUX PERSPECTIVE:

240 Church Road

EXISTING ex. Disconnecting GARAGE MH

BOUNDARY LINE 22.355M Vehicle Access

steel beam over

BUILDING LINE 5M

X 410

1780

-

drop bulkhead ceiling to match existing passage ceiling height

EX. Kitchen

2270

---

pedestrian gate

600

EX. Passage EX. Garage

15 m²

20 m²

270

4230

535

220

4670

270

4125

270

ERF 698 BOUNDARY LINE 68.010M

ex.S/S

900 7110

8010

3785 270

890

RE 3

EX. Storage 9 m²

EX. Garage

N

17 m²

N

EX. WC 4 m² wc whb

.............................................................................

Architect

....................................................................

NMBM MUNICIPALITY MUNICIPAL INFORMATION ERF nr.

694

ERF (sqm)

1 520 sqm

ZONING

RES 1

ALLOTMENT AREA

WALMER

EXISTING COVERAGE

320 sqm

ADDITIONAL COVERAGE

37.3 sqm (2.5%)

TOTAL COVERAGE

357.3 sqm

COVERAGE PERCENTAGE

23.5 %

EXISTING GROUND FLOOR AREA

232 sqm

EXISTING FIRST FLOOR AREA

12 sqm

ADDITIONAL AREA

37.3 sqm

BUILDING LINE REAR

1.5M

BUILDING LINE SIDE

1.5M

BUILDING LINE FRONT

5M

OR TRANSMITTED IN ANY FORM OR BY ANY MEANS IN PART OR IN WHOLE WITHOUT THE PERMISSION OF STRUKT ARCHITECTS. DO NOT SCALE - USE FIGURED DIMENSIONS ONLY. ALL LEVELS AND DIMENSIONS TO BE VERIFIED PRIOR TO COMMENCEMENT OF ANY WORK. REPORT ANY DISCREPANCIES IMMEDIATELY. SHOP DRAWINGS TO BE APPROVED PRIOR TO CONSTRUCTION. ALL WORK TO BE CARRIED OUT IN STRICT ACCORDANCE WITH NATIONAL BUILDING REGULATIONS, SOUTH AFRICAN NATIONAL STANDARDS, AND LOCAL AUTHORITY BY-LAWS.

4665

BUILDING LINE 1.5M

5915

Client

3 m²

2880

New walls: Plaster and painted Brick walls

EXISTING POOL

ex.MH

ex.S/S

535 895

220 210 110 2250

seat

W4 01

wc

ex.S/S

bath

ex.RE

ex.MH

7 m²

EX. Closet Area

EX. Bathroom

8 m²

270 900

bic

whb

EX. Storage

bath D2 01

27 m²

New Braai Area

braai Counter

D1 01

535

bic

8 m²

SECTION A-A

445535

ex.VP ex.S/S

W3 above

Demolish walls: Removal of existing walls

Pizza Oven pizza oven

Concrete sleave underneath new wall for 110 drainage pipe

2785

9110

220

New walls: 270mm Plaster and painted Brick walls

N

Wall light: Exterior wall light to be installed at 1550mm from FFL

EX. Bathroom

HP

3630

4170

110 810 245 1190 270 1060 270 210

22Ø

IE 2

1 m² wc

New 100l Kwikot geyser in Kitchen ceiling

ex.S/S

19 m²

EX. WC

whb

W1 01

EX. Bedroom

15 m²

EXISTING OUTBUILDING ERF 693

1780

3310 895

Demolish walls: Removal of existing walls

EX. Bedroom

RE 3

ERF 694 WALMER

1500 1250

bic

20 m²

270

7110

1330

2880

RE 2

UP

15 m²

15Ø

W6 01

bic

EX. Passage

EX. Kitchen

sink

D3 01

110 210

New walls: 540mm Plaster and painted Brick walls

G

W7 01

2250

proposed tree

Rainwater: 75x50mm fluted rectangular domestic aluminium down pipes.

SECTION AA

270 445 270 270215

drop bulkhead ceiling to match existing passage ceiling height

ex.MH

BOUNDARY LINE 68.010M

RE 2

BUILDING LINE 1.5M

1500

ex.VP ex.S/S

ex.S/S

18 m²

ex.S/S

ex.MH

7 m²

New walls: 270mm Plaster and painted Brick walls

SECTION A-A

880 360

RE 3

X 220

2145

2045

21175

3785 ex.MH

270

New walls: 540mm Plaster and painted Brick walls

W2 01

RE 1

220

D1 01

concrete soffit above

X 410

100mm thick Concrete cast in situ seat finished with quater bulnose edge and to be polished smooth

230

22 m²

G

600

proposed tree

Drainage: Concrete sleave underneath new wall for 110 drainage pipe.

W4 01

X 370

715

12625

12895

2045

900

900 270

overhang

D2 01

2

Floor finished to be confirmed

Rainwater: 75x50mm fluted rectangular domestic aluminium down pipes.

Wall light: Exterior wall light to be installed at 1550mm from FFL

EX. Bedroom

Demolish walls: Removal of existing walls

8010

5535

275 line of concrete sofit overhead

230 810

1

Pizza Oven 540

Drainage: Concrete sleave underneath new wall for 110 drainage pipe.

210 110

W3 above

27 m²

810

1205

New Braai Area

IE 2

EX. Lobby

30 m²

Beam over

SECTION B-B

145

1655

Braai: Refer to Braai detail drawings and specifications

220

ex.VP ex.S/S

ex.S/S

EX. Dining Area

Beam over

braai

SECTION B-B

9110

270 1060 270

RE 2

Rainwater: Stainless steel pipe (75mm Ø) with welded stainless steel tab to support galvanized chain.

145mm Concrete ledge

Scullery Pizza Oven: Unit/Type :Built In Fuel: Wood Burning Unit Size :1000 X 1100mm – Internal Diameter 900mm

EX. Lounge

concrete soffit above

W6 01

W1 01

900

D3 01

275

1055

sink

3630

4170

RE 1

6 m²

1330

2750

Concrete sleave underneath new wall for 110 drainage pipe

270 13425

Joinery unit: Joinery unit as per joinery drawings ---

2785

wc

IE 1

22Ø

4170

1 m²

whb

600

15Ø

4115

EX. WC

concrete soffit above

600

Contractor to keep full set of drawings on site. Contractor is responsible for the correct setting out of the building on site with particular reference to boundaries and building lines. Contractor to verify all levels and dimensions on site and check same against architects drawings before commencing work. Figured dimensions to be used in preference to scaled dimensions. Large scale details to be used where available. Errors, discrepancies or omissions are to be reported to the architect immediately for clarification before work is undertaken. All drainage lines indicated are diagrammatic. Allow 30mm for floor finish and screed. Ensure a flush junction between different floor finishes. All necessary brick walls to be furnished with weepholes, wall ties, dpc etc. as per Contractor. External cavity walls to have galvanized wire ties provided at a rate of 4 tiles/sqm. All glazing to doors and windows to comply with SABS 0137 code of practice. Final earthworks to be checked and confirmed on site. All drawings to be read in conjunction with Engineer's Drawings & Fire Engineer's Drawings.

EXISTING DWELLING

PROPOSED ADDITION

W7 01

NOTE: IMPORTANT

BUILDING LINE 1.5M

fulbore outlet

New 100L Kwikot Geyser in Kitchen ceiling

12995

4665

360

8 m²

sink

G

880

EX. Bathroom

W2 01

1240

bath

2045

SECTION AA

RE 1

5145

HP

30 m²

BOUNDARY LINE 22.8M ERF 695

Scale 1:200

110mm SS 410 x Ground Floor FFL

410 x Ground Floor FFL

NGL - O

-695 x Concrete Footing level

GULLY

450mm min. depth between cover and invert level

0

Invert Level

470

540

Depth

470

540

Distance

3000

Gradient

1 : 60

410 x Ground Floor FFL

NGL - O

110mm Ø PVC sewer pipe

0

WM

410 x Ground Floor FFL

NGL - O

Cover Level

DW

-695 x Concrete Footing level

Cover Level

0

Invert Level

540

635

Depth

540

635

Distance

4755

Gradient

1 : 60

3000

PROPOSED ALTERATION & ADDITION ERF 694 WALMER DRAWING

NGL - O

FLOOR PLANS & DRAINAGE SECTIONS

110mm Ø PVC sewer pipe

450mm min. depth between cover and invert level

PROJECT Ex RE.

IE 2

New RE 2

Sink

New RE 3

sink

Scale 1:100

New RE 2

New RE 1

Gully

Scale 1:50

SITE PLAN

New RE 3

GROUND FLOOR PLAN

GROUND FLOOR FFL

-695 x Concrete Footing level

450mm min. depth between cover and invert level

Cover Level

0

Invert Level

635

660

820

Depth

635

660 1205

9265

Gradient

1 : 60

1205

CLIENT HOUSE LE ROUX

450mm min. depth between cover and invert level

820

Distance

4755

110mm Ø PVC sewer pipe

9265

Cover Level

0

Invert Level

820

865

Depth

820

865

Distance

2325

Gradient

1 : 60

ERF NUMBER 694

ALLOTMENT WALMER DRAWN

SCALE AS SHOWN

DRAINAGE SECTION 01

DRAINAGE SECTION 02

DRAINAGE SECTION 03

DRAINAGE SECTION 04

As indicated

Scale 1:50

DWG USE

SM

DATE ISSUED CHECK

07 11 2022 PROJECT No.

0147

DRAWING No. REV

CS 100

SACAP REG-24751337

WD BASSON (MArch NMMU, PrArch)cell : 084 331 2244

Roof sheeting: Global Roofing Solutions 0.53mm thick 762mm cover Corrugated profile Ultra AZ200 spelter G550 Clean Colorplus® Slate finish topcoat and Shadow Grey backing coat roof sheeting, fixed to 76 x 50 treated SA Pine intermediate timber purlins at max. 1200mm centres. Hex Flange Head + EPDM Seal self-drilling Type 17 drill point, No. 12-11 x 65mm long fasteners (fastener lengths may vary depending on the insulation used or requirements). Purlin fixed to first, fourth and eighth crest of each sheet and at all crests at sheet ends, all following the manufacturer`s specifications by a GRS approved contractor. • Brand: BlueScope • Type of Building: residential • Roof Pitch: 20° • Climatic Condition: from 400m to 5km of the coast - Zone C4/C5 High Corrosion Risk • Roof Profile: Corrugated • Material: Clean Colorbond® Ultra • Material Gauge: 0.53mm • Colour: Slate.

Roof sheeting: Global Roofing Solutions 0.53mm thick 762mm cover Corrugated profile Ultra AZ200 spelter G550 Clean Colorplus® Slate topcoat and Shadow Grey backing coat roof sheeting, fixed to 76 x 50 treated SA Pine intermediate timber purlins at max.

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

Flashing: Sidewall Flash to match roof colour. (Livid Grey)

Sisalation: Sisalation 405 residential R-Value: 1.30 for under Sheeting, with a ceiling for downwards heat-flow when used with minimum 15mm airspace.

HOUSE LE ROUX PERSPECTIVE:

4780 x New Roof Apex

DPC: Stepped 375 Micron DPC.

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

Storm Cowl: Jetmaster 275mm Mild Steel Storm Cowl.

Insulation: Isotherm 75mm thick thermally bonded polyester thermal insulation (Density: 10 kg/m³), complying with SANS1381-1:2013, laid between exposed timber rafters. • R-value: 1.53m².K/W • Thermal conductivity: 0,039 W/mK

Weep holes: Open perpends 900mm intervals to form weepholes

50

Timber Roof Truss: 152x50mm SA Pine Timber rafters spaced @ max. 1050mm c/c, with 76 x 50mm SA Pine Timber purlins. All timber used in the rection of the building to be treated against termite, borer attack & fungal decay in strict accordance to SANS 10005

Sisalation: Sisalation 405 residential R-Value: 1.30 for under Sheeting.

50 Plaster band: 195mm Plaster band above window.

195

Flashing: Sidewall Flash to match roof colour. (Livid Grey)

Insulation: Isotherm 75mm thick thermally bonded polyester thermal insulation (Density: 10 kg/m³), complying with SANS1381-1:2013, laid between exposed timber rafters. • R-value: 1.53m².K/W • Thermal conductivity: 0,039 W/mK

Rainwater: Aluminium Gutter 125 x 85mm domestic ogee profile gutter.

Drip

Ceiling: Plywood subframe painted black 2440 x 1220 x 15mm to be cut to form arch of ceiling for the 38 x 38mm SA PAR pine timber with 10mm spacing to be treated. Colour TBC

20

Fascia board: Fibre cement fascia board 10mm x 150mm.

Aluminium window: Silicone sealant between window frame and steel beam. 3600 x U/S Lintel Slot Window

Beam: 254 x 146 x 31mm steel beam to be galvanised and powder coated. Colour TBC

Client

Scale 1:10 Roof sheeting: Global Roofing Solutions 0.53mm thick 762mm cover Corrugated profile Ultra AZ200 spelter G550 Clean Colorplus® Slate finish topcoat and Shadow Grey backing coat roof sheeting, fixed to timber intermediate purlins at MAX 1200mm centres and eaves and ridge purlins at MAX 1200mm centres (final spacing to be calculated by an Engineer) using Hex Flange Head + EPDM Seal self-drilling Type 17 drill point, No. 12-11 x 65mm long fasteners (fastener lengths may vary depending on the insulation used or requirements). Purlin fixed to first, fourth and eighth crest of each sheet and at all crests at sheet ends, all following the manufacturer`s specifications by a GRS approved contractor. • Brand: BlueScope • Type of Building: residential • Roof Pitch: 20° • Climatic Condition: from 400m to 5km of the coast - Zone C4/C5 High Corrosion Risk • Roof Profile: Corrugated • Material: Clean Colorbond® Ultra • Material Gauge: 0.53mm • Colour: Slate.

Flashing: Sidewall Flash to match roof colour. (Slate)

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

4780 x New Roof Apex

NMBM MUNICIPALITY MUNICIPAL INFORMATION

Slip joint: As per Engineers Spec.

Aluminium window: 50 x 50 x3mm SHS post between Aluminium window.

820

Braai Flue: 1200mm x 275 Ø Mild steel Flue pipes. Timber Roof Rafters: 152x50mm SA Pine Timber rafters spacing according to specialist, with 38 x 38mm SA Pine Timber Battens.

Insulation: Fibrefrax blanket insulation as per specialist spec.

Wall ties: Wall tie after every 3 brick course.

Braai: Mild steel Flue pipe fitting frame.

DPC: 375 Micron DPC in cavity.

Lintels: Fabricated Concrete lintel 105 x 75mm. As per engineers specification.

2140 x Lintel Hieght of Braai

Ceiling: Plywood subframe painted black 2440 x 1220 x 15mm to be cut to form arch of ceiling for the 38 x 38mm SA PAR pine timber with 10mm spacing to be treated. Colour TBC

694

ERF (sqm)

1 520 sqm

ZONING

RES 1

ALLOTMENT AREA

WALMER

EXISTING COVERAGE

320 sqm

ADDITIONAL COVERAGE

37.3 sqm (2.5%)

TOTAL COVERAGE

357.3 sqm

COVERAGE PERCENTAGE

23.5 %

EXISTING GROUND FLOOR AREA

232 sqm

EXISTING FIRST FLOOR AREA

12 sqm

ADDITIONAL AREA

37.3 sqm

BUILDING LINE REAR

1.5M

BUILDING LINE SIDE

1.5M

BUILDING LINE FRONT

5M

OR TRANSMITTED IN ANY FORM OR BY ANY MEANS IN PART OR IN WHOLE WITHOUT THE PERMISSION OF STRUKT ARCHITECTS. DO NOT SCALE - USE FIGURED DIMENSIONS ONLY. ALL LEVELS AND DIMENSIONS TO BE VERIFIED PRIOR TO COMMENCEMENT OF ANY WORK. REPORT ANY DISCREPANCIES IMMEDIATELY. SHOP DRAWINGS TO BE APPROVED PRIOR TO CONSTRUCTION. ALL WORK TO BE CARRIED OUT IN STRICT ACCORDANCE WITH NATIONAL BUILDING REGULATIONS, SOUTH AFRICAN NATIONAL STANDARDS, AND LOCAL AUTHORITY BY-LAWS.

Timber slatted ceiling to be fixed to underside of roof structure

W3 01

Braai to manufacturer 255

3215 x Top of Concrete

805

3600 x U/S Lintel Slot Window 3505 x U/S Ceiling GF

ERF nr.

Weep holes: Open perpends 900mm intervals to form weepholes 3855 x Top of Beam

....................................................................

LED Recess: 23 x 8mm LED strip running the full length.

Beam: 254 x 146 x 31mm steel beam to be galvanised and powder coated. Colour TBC

Sisalation: Sisalation 405 residential R-Value: 1.30 for under Sheeting, with a ceiling for downwards heat-flow when used with minimum 15mm airspace.

.............................................................................

Architect

Aluminium window: Screed to fall waterprroping to be confirmed by manufacturer.

2960 x U/S Concrete Soffit

Contractor to keep full set of drawings on site. Contractor is responsible for the correct setting out of the building on site with particular reference to boundaries and building lines. Contractor to verify all levels and dimensions on site and check same against architects drawings before commencing work. Figured dimensions to be used in preference to scaled dimensions. Large scale details to be used where available. Errors, discrepancies or omissions are to be reported to the architect immediately for clarification before work is undertaken. All drainage lines indicated are diagrammatic. Allow 30mm for floor finish and screed. Ensure a flush junction between different floor finishes. All necessary brick walls to be furnished with weepholes, wall ties, dpc etc. as per Contractor. External cavity walls to have galvanized wire ties provided at a rate of 4 tiles/sqm. All glazing to doors and windows to comply with SABS 0137 code of practice. Final earthworks to be checked and confirmed on site. All drawings to be read in conjunction with Engineer's Drawings & Fire Engineer's Drawings.

W3 01

3215 x Top of Concrete

PLASTER BAND DETAIL

NOTE: IMPORTANT

Lintels: Fabricated Concrete lintel 105 x 75mm. As per engineers specification. Aluminium window: 50 x 50 x3mm SHS post between Aluminium window.

Cavity closure to be confirmed

Ceiling: 2440 x 1220 x 15mm Plywood backing treated and stained to be cut to form arch of ceiling for the 32 x 20mm SA PAR pine timber with 10mm spacing to be stain and treated. Colour TBC

255

Timber purlins: 76 x 50 treated SA Pine intermediate timber purlins at max 1200mm centres. Hex Flange Head + EPDM Seal self-drilling Type 17 drill point, No. 12-11 x 65mm long fasteners (fastener lengths may vary depending on the insulation used or requirements). Purlin fixed to first, fourth and eighth crest of each sheet and at all crests at sheet ends, all following the manufacturer`s specifications by a GRS approved contractor.

Flashing: Sidewall Flash to match roof colour. (Livid Grey)

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

2960 x U/S Concrete Soffit

820

Plaster band: 150mm Plaster band above window.

1335 x Braai Height

85

Aluminium window: Silicone sealant between window frame and steel beam. 2140 x Lintel Hieght of Braai

pizza oven

400 wood storage

810

Aluminium Sliding door: Weather step.

230

1245

wood storage

230

PROPOSED ALTERATION & ADDITION ERF 694 WALMER 840

1335 x Braai Height

DPC: 375 Micron DPC under new concrete floor.

PROJECT

805

pizza oven

140

1767 x Front Boundary Wall

D1 01

DPC: 375 Micron DPC .

785

Beam: 254 x 146 x 31mm Beam Colour TBC

Concrete: Cast in place Concrete countertop.

540

410 x Ground Floor FFL

PARTWALL BRAAI AND DETAILS

wood storage

1100

410 x Ground Floor FFL

DRAWING Surface Bed: 120mm THK MESH REINFORCED CONCRETE SLAB.

CLIENT HOUSE LE ROUX

Weep holes: Open perpends 900mm intervals to form weepholes

ERF NUMBER 694 Surface Bed: 120mm thick mesh reinforced concrete as per engineers details.

Concrete footing: As per Engineers details.

Cavity wall: Un-Reinforced concrete cavity infill. Wall ties to be place every 3rd brick course.

DPC: 375 Micron stepped dpc.

SECTION D-D Scale 1:25

Scale 1:10

DRAWN

SCALE AS SHOWN

SM

As indicated DWG USE

PARTWALL SECTION THROUGH BRAAI

ALLOTMENT WALMER

DATE ISSUED CHECK

07 11 2022 PROJECT No.

0147

DRAWING No. REV

CS 101

SACAP REG-24751337

WD BASSON (MArch NMMU, PrArch)cell : 084 331 2244

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

Sisalation: Sisalation 405 residential R-Value: 1.30 for under Sheeting, with a ceiling for downwards heat-flow when used with minimum 15mm airspace.

Flashing: Sidewall Flash to match roof colour. (Livid Grey)

Timber purlins: 76 x 50 treated SA Pine intermediate timber purlins at max 1200mm centres. Hex Flange Head + EPDM Seal self-drilling Type 17 drill point, No. 12-11 x 65mm long fasteners (fastener lengths may vary depending on the insulation used or requirements). Purlin fixed to first, fourth and eighth crest of each sheet and at all crests at sheet ends, all following the manufacturer`s specifications by a GRS approved contractor.

Cavity wall: 300mm cavity wall with un-Reinforced concrete cavity infill.

Sisalation: Sisalation 405 residential R-Value: 1.30 for under Sheeting.

40

Rainwater: Aluminium Gutter 125 x 85mm domestic ogee profile gutter.

Ceiling: 2440 x 1220 x 15mm Plywood backing treated and stained to be cut to form arch of ceiling for the 32 x 20mm PAR SA pine timber with 10mm spacing to be stain and treated. Colour TBC

Fascia board: Fibre cement fascia board 10mm x 150mm.

50

Timber purlins: 76 x 50 treated SA Pine intermediate timber purlins at max 1200mm centres. Hex Flange Head + EPDM Seal self-drilling Type 17 drill point, No. 12-11 x 65mm long fasteners (fastener lengths may vary depending on the insulation used or requirements). Purlin fixed to first, fourth and eighth crest of each sheet and at all crests at sheet ends, all following the manufacturer`s specifications by a GRS approved contractor.

35

Flat roof: 150mm thick flat roof with screed to fall towards fullbore

NOTE: IMPORTANT

FLAT ROOF: One layer Derbigum SP4 waterproofing membrane, with 75mm side laps and 100mm end laps, sealed to primed surface to falls and crossfalls by `torchfusion` finished with two coats Roofcote bituminous aluminum paint. Waterproofing to be installed by an Approved Derbigum Contractor under a ten year guarantee.

Fascia board: Fibre cement fascia board 10mm x 150mm.

Aluminium window: screed to fall waterproofin to be confirmed with manufacturer.

DPC: Stepped 375 Micron DPC.

Ceiling: Plywood subframe painted black 2440 x 1220 x 15mm to be cut to form arch of ceiling for the 38 x 38mm SA PAR pine timber with 10mm spacing to be treated. Colour TBC

Weep holes: Open perpends 900mm intervals to form weepholes

LED Recess: 23 x 8mm LED strip running the full length.

Wedge: Coping wedge

drip.

DPC: Stepped 375 Micron DPC.

Concrete ceiling : concrete underside to be class 1 off shutter ceiling finish

Beam: 254 x 146 x 31mm steel beam to be galvanised and powder coated. Colour TBC

Weep holes: Open perpends 900mm intervals to form weepholes

Aluminium window: beam above to have drip.

Scale 1:10

Client Flue: STAINLESS STEEL Flue Pipe – 200mm Diameter, Single Wall For Large Pizza Oven – Length 1200mm

Insulation: Fibrefrax blanket insulation as per specialist spec.

PIZZA OVEN: Bellissmo off the shelve Pizza Oven 1000 X 1100mm – Internal Diameter 900mm to manufacturers specifications

Roof sheeting: Global Roofing Solutions 0.53mm thick 762mm cover Corrugated profile Ultra AZ200 spelter G550 Clean Colorbond® Ultra Livid Grey finish topcoat and Shadow Grey backing coat roof sheeting, fixed to76 x 50 treated SA Pine intermediate timber purlins at max. 1200mm centres. Hex Flange Head + EPDM Seal self-drilling Type 17 drill point, No. 12-11 x 65mm long fasteners (fastener lengths may vary depending on the insulation used or requirements). Purlin fixed to first, fourth and eighth crest of each sheet and at all crests at sheet ends, all following the manufacturer`s specifications by a GRS approved contractor. • Brand: BlueScope • Type of Building: residential • Roof Pitch: 20° • Climatic Condition: from 400m to 5km of the coast - Zone C4/C5 High Corrosion Risk • Roof Profile: Corrugated • Material: Clean Colorbond® Ultra • Material Gauge: 0.53mm • Colour: Livid Grey.

Flue Flashing: Heat resistant flashing.

Sisalation: Sisalation 405 residential R-Value: 1.30 for under Sheeting.

30

385 820

DPC: 375 Micron DPC in 50mm cavity.

Insulation: Fibrefrax blanket insulation as per specialist spec.

805

Braai: Mild steel Flue pipe fitting frame.

Lintels: Fabricated Concrete lintel 105 x 75mm. As per engineers specification.

200 140

50

Concrete Sill: to slope away from threhold Aluminium window: Silicone sealant between window frame and concrete.

Plaster band: 150mm Plaster band above window.

DPC: 375 Micron stepped dpc.

50

W4 01

694

ERF (sqm)

1 520 sqm

ZONING

RES 1

ALLOTMENT AREA

WALMER

EXISTING COVERAGE

320 sqm

ADDITIONAL COVERAGE

37.3 sqm (2.5%)

TOTAL COVERAGE

357.3 sqm

COVERAGE PERCENTAGE

23.5 %

EXISTING GROUND FLOOR AREA

232 sqm

EXISTING FIRST FLOOR AREA

12 sqm

ADDITIONAL AREA

37.3 sqm

BUILDING LINE REAR

1.5M

BUILDING LINE SIDE

1.5M

BUILDING LINE FRONT

5M

OR TRANSMITTED IN ANY FORM OR BY ANY MEANS IN PART OR IN WHOLE WITHOUT THE PERMISSION OF STRUKT ARCHITECTS. DO NOT SCALE - USE FIGURED DIMENSIONS ONLY. ALL LEVELS AND DIMENSIONS TO BE VERIFIED PRIOR TO COMMENCEMENT OF ANY WORK. REPORT ANY DISCREPANCIES IMMEDIATELY. SHOP DRAWINGS TO BE APPROVED PRIOR TO CONSTRUCTION. ALL WORK TO BE CARRIED OUT IN STRICT ACCORDANCE WITH NATIONAL BUILDING REGULATIONS, SOUTH AFRICAN NATIONAL STANDARDS, AND LOCAL AUTHORITY BY-LAWS.

V JOINT incliuded to create break in concrete finish

to be painted white

400

Concrete BENCH: Cast in place 85mm thick concrete seat

Concrete Sill: Cast in place 100mm thick concrete sill with drip

100

Concrete Floor: Mesh reinforced concrete surfacebed on 150mm compacted fill with dpm 3 layer beneath slab.

Concrete Floor: 120mm mesh reinforced concrete surfacebed on 50mm compacted fill with dpm layer beneath slab.

Backfill: Backfill with 150mm layers of selected excavated material

720

255

PROPOSED ALTERATION & ADDITION ERF 694 WALMER DRAWING

SECTIONS AND DETAILS CLIENT HOUSE LE ROUX

130 150 150

Cavity wall: Concrete cavity infill. Wall ties to be place every 3rd brick course.

Surface Bed: 120mmthick mesh reinforced concrete slab as per engineers details.

DPC: 375 Micron stepped dpc.

Cavity wall: concrete cavity infill. Wall ties to be place every 3rd brick course to engineers specifications

Concrete footing: As per Engineers details.

ERF nr.

PROJECT

350

840

Weep holes: Open perpends 900mm intervals to form weepholes

NMBM MUNICIPALITY MUNICIPAL INFORMATION

Concrete seat: Cast in place 85mm thick concrete seat

3

Concrete: Cast in place Concrete countertop.

....................................................................

abe dura.®flex with abe®mesh to be applied in strict coherence with manufacturers specification.

Aluminium window: Screed to fall weather slope.

LED Recess: 20 x 20mm LED strip running the full length.

Architect

to be concrete finish

85

2550

Braai Flue: 1200mm x 275 Ø Mild steel Flue pipes.

Aluminium window: weather stepping waterproofing to be confirmed by aluminium manufacturer

1250

3445

Insulation: Fibrefrax blanket insulation as per specialist spec.

.............................................................................

Scale 1:10

Ceiling: 2440 x 1220 x 15mm Plywood backing treated and stained to be cut to form arch of ceiling for the 32 x 20mm SA PAR pine timber with 10mm spacing to be stain and3 treated. Colour TBC

300

255

Beam: 254 x 146 x 31mm steel beam to be galvanised and powder coated. Colour TBC

85 245 100

4650

Slip joint: As per Engineers Spec.

PIZZA OVEN DETAIL

W3 02

1725

W3 01

Aluminium window: 50 x 50 x3mm SHS post beyond Aluminium window.

2960 x U/S Concrete Soffit

410 x Ground Floor FFL

Insulation: Isotherm 75mm thick thermally bonded polyester thermal insulation (Density: 10 kg/m³), complying with SANS1381-1:2013, laid between exposed timber rafters. • R-value: 1.53m².K/W • Thermal conductivity: 0,039 W/mK

50

150

Lintels: Fabricated Concrete lintel 105 x 75mm. As per engineers specification.

3215 x Top of Concrete

1335 x Braai Height

60

Timber Roof Truss: 152x50mm SA Pine Timber rafters spaced @ max. 1050mm c/c, with 76 x 50mm SA Pine Timber purlins. All timber used in the rection of the building to be treated against termite, borer attack & fungal decay in strict accordance to SANS 10005

Fascia board: Fibre cement fascia board 10mm x 150mm.

3600 x U/S Lintel Slot Window

2140 x Lintel Hieght of Braai

915

60

Concrete: Cast in place Concrete countertop.

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

670

Rainwater: Aluminium Gutter 125 x 85mm domestic ogee profile gutter.

3855 x Top of Beam

Flashing: Sidewall Flash to match roof colour. (Livid Grey)

85

Roof: Rubber Closures to be used at end of roof.

Flashing: Roll top ridge flashing to match roof colour. (Livid Grey - AZ200)

165 85

4780 x New Roof Apex

Plaster: 15mm thick plaster finish

Brick facade: flush joint brick painted white

Flue Flashing: Heat resistant and waterproof flashing.

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

Contractor to keep full set of drawings on site. Contractor is responsible for the correct setting out of the building on site with particular reference to boundaries and building lines. Contractor to verify all levels and dimensions on site and check same against architects drawings before commencing work. Figured dimensions to be used in preference to scaled dimensions. Large scale details to be used where available. Errors, discrepancies or omissions are to be reported to the architect immediately for clarification before work is undertaken. All drainage lines indicated are diagrammatic. Allow 30mm for floor finish and screed. Ensure a flush junction between different floor finishes. All necessary brick walls to be furnished with weepholes, wall ties, dpc etc. as per Contractor. External cavity walls to have galvanized wire ties provided at a rate of 4 tiles/sqm. All glazing to doors and windows to comply with SABS 0137 code of practice. Final earthworks to be checked and confirmed on site. All drawings to be read in conjunction with Engineer's Drawings & Fire Engineer's Drawings.

Beam: 254 x 146 x 31mm steel beam to be galvanised and powder coated. Colour TBC

CONCRETE FLAT ROOF DETAIL

ROOF EAVES DETAIL

Storm Cowl: Jetmaster 275mm Mild Steel Storm Cowl.

PERSPECTIVE:

Insulation: Isotherm 75mm thick thermally bonded polyester thermal insulation (Density: 10 kg/m³), complying with SANS1381-1:2013, laid between exposed timber rafters. • R-value: 1.53m².K/W • Thermal conductivity: 0,039 W/mK

Rainwater: Aluminium Gutter 125 x 85mm domestic ogee profile gutter.

Timber Roof Truss: 152x50mm SA Pine Timber rafters spaced @ max. 1050mm c/c, with 76 x 50mm SA Pine Timber purlins. All timber used in the rection of the building to be treated against termite, borer attack & fungal decay in strict accordance to SANS 10005

Insulation: Isotherm 75mm thick thermally bonded polyester thermal insulation (Density: 10 kg/m³), complying with SANS1381-1:2013, laid between exposed timber rafters. • R-value: 1.53m².K/W • Thermal conductivity: 0,039 W/mK

HOUSE LE ROUX

Flashing: Sidewall Flash to match roof colour. (Livid Grey)

190

Roof sheeting: Global Roofing Solutions 0.53mm thick 762mm cover Corrugated profile Ultra AZ200 spelter G550 Clean Colorplus® Slate finish topcoat and Shadow Grey backing coat roof sheeting, fixed to 76 x 50 treated SA Pine intermediate timber purlins at max.

Roof sheeting: Global Roofing Solutions 0.53mm thick 762mm cover Corrugated profile Ultra AZ200 spelter G550 Clean Colorbond® Ultra Livid Grey finish topcoat and Shadow Grey backing coat roof sheeting, fixed to 76 x 50 treated SA Pine intermediate timber purlins at max.

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

ERF NUMBER 694

ALLOTMENT WALMER DRAWN

SCALE AS SHOWN

SM

As indicated DWG USE

DATE ISSUED CHECK

07 11 2022

SECTION C-C

CONCRETE SEAT DETAIL

Scale 1:25

Scale 1:10

PROJECT No.

0147

DRAWING No. REV

CS 102

SACAP REG-24751337

WD BASSON (MArch NMMU, PrArch)cell : 084 331 2244

W1

U/S LINTEL HEIGHT

WALL CAVITY

SAFETY GLASS

HANDLE FIXED POSITION

TOP SILL

2045

1200 SAFETY GLASS

FFL SCALE 1:25

W3

FRAME MATERIAL:

Powder Coated Aluminium - Black

FRAME MATERIAL:

Powder Coated Aluminium - Black

OVERALL SIZE: GLAZING:

Clear single low E Safety Glazing

W4

6305

U/S LINTEL HEIGHT

2 Braai Area

FRAME MATERIAL:

Powder Coated Aluminium - Black

OVERALL SIZE:

6305mm x 385mm

GLAZING:

Clear single low E Safety Glazing

Roof sheeting: Global Roofing Solutions 0.53mm thick 762mm cover Corrugated profile Ultra AZ200 spelter G550 Clean Colorplus® slate finish topcoat and Shadow Grey backing coat roof sheeting, fixed to 76 x 50 treated SA Pine intermediate timber purlins at max. 1200mm centres. Hex Flange Head + EPDM Seal self-drilling Type 17 drill point, No. 12-11 x 65mm long fasteners (fastener lengths may vary depending on the insulation used or requirements). Purlin fixed to first, fourth and eighth crest of each sheet and at all crests at sheet ends, all following the manufacturer`s specifications by a GRS approved contractor. • Brand: BlueScope • Type of Building: residential • Roof Pitch: 20° • Climatic Condition: from 400m to 5km of the coast - Zone C4/C5 High Corrosion Risk • Roof Profile: Corrugated • Material: Clean Colorbond® Ultra • Material Gauge: 0.53mm • Colour: slate.

FRAME MATERIAL:

Powder Coated Aluminium - Black

OVERALL SIZE:

2245mm x 1765mm

GLAZING:

Clear single low E Safety Glazing

60

670

30

100

SECTION B-B Scale 1:25

FRAME MATERIAL:

Powder Coated Aluminium - Black

OVERALL SIZE:

3625mm x 350mm

GLAZING:

Clear single low E Safety Glazing

Client

Top Hung window

W5

W7

U/S CONCRETE SOFFIT

360

....................................................................

NMBM MUNICIPALITY MUNICIPAL INFORMATION

U/S CONCRETE SOFFIT

TOP SILL 2880

FFL GROUND FLOOR

Scale 1:25 All dimensions to be checked on site

QUANTITY:

1 Braai area

QUANTITY:

1 Scullery Area

FRAME MATERIAL:

Powder Coated Aluminium - Black

FRAME MATERIAL:

Powder Coated Aluminium - Black

OVERALL SIZE:

2880mm x 495mm

OVERALL SIZE:

360mm x 2550mm

GLAZING:

Clear single low E Safety Glazing

GLAZING:

Clear single low E Safety Glazing

Fixed window

ERF nr.

694

ERF (sqm)

1 520 sqm

ZONING

RES 1

ALLOTMENT AREA

WALMER

EXISTING COVERAGE

320 sqm

ADDITIONAL COVERAGE

37.3 sqm (2.5%)

TOTAL COVERAGE

357.3 sqm

COVERAGE PERCENTAGE

23.5 %

EXISTING GROUND FLOOR AREA

232 sqm

EXISTING FIRST FLOOR AREA

12 sqm

ADDITIONAL AREA

37.3 sqm

BUILDING LINE REAR

1.5M

BUILDING LINE SIDE

1.5M

BUILDING LINE FRONT

5M

D3

900

80

PROJECT

570

PROPOSED ALTERATION & ADDITION ERF 694 WALMER

40

D2 01

570

27 m²

Concrete Floor: Mesh reinforced concrete surfacebed on 150mm compacted fill with dpm layer beneath slab.

DRAWING

DOOR AND WINDOW SCHEDULES & SECTION CLIENT HOUSE LE ROUX

Aluminium Sliding door: 45mm Weather step.

Concrete footing: As per Engineers details.

OR TRANSMITTED IN ANY FORM OR BY ANY MEANS IN PART OR IN WHOLE WITHOUT THE PERMISSION OF STRUKT ARCHITECTS. DO NOT SCALE - USE FIGURED DIMENSIONS ONLY. ALL LEVELS AND DIMENSIONS TO BE VERIFIED PRIOR TO COMMENCEMENT OF ANY WORK. REPORT ANY DISCREPANCIES IMMEDIATELY. SHOP DRAWINGS TO BE APPROVED PRIOR TO CONSTRUCTION. ALL WORK TO BE CARRIED OUT IN STRICT ACCORDANCE WITH NATIONAL BUILDING REGULATIONS, SOUTH AFRICAN NATIONAL STANDARDS, AND LOCAL AUTHORITY BY-LAWS.

Fixed

2890

New Braai Area

.............................................................................

Architect

U/S CONCRETE SOFFIT

Surface Bed: 120mmthick mesh reinforced concrete slab as per engineers details.

Concrete footing: As per Engineers details.

1 Scullery area

SAFETY GLASS

5 14540

Cavity wall: Un-Reinforced concrete cavity infill. Wall ties to be place every 3rd brick course.

QUANTITY:

Scale 1:25 All dimensions to be checked on site

760

925 410 x Ground Floor FFL

Weep holes: Open perpends 900mm intervals to form weepholes

600

2550

580 1

Concrete: Cast in place Concrete countertop. DPC: 375 Micron stepped dpc.

LED Recess: 23 x 8mm LED strip running the full length.

280

1335 x Braai Height

pizza oven

16525 200

805

Flue: STAINLESS STEEL Flue Pipe – 200mm Diameter, Single Wall For Large Pizza Oven – Length 1200mm

PIZZA OVEN: Large Pizza Oven 1000 X 1100mm With Brick Façade – Internal Diameter 900mm

Aluminium window: screed to fall waterproofin to be confirmed with manufacturer.

4370

DPC: 375 Micron DPC in 50mm cavity.

Insulation: Fibrefrax blanket insulation as per specialist spec.

2140 x Lintel Hieght of Braai

Ceiling: 2440 x 1220 x 15mm Plywood backing treated and stained to be cut to form arch of ceiling for the 32 x 20mm SA PAR pine timber with 10mm spacing to be stain and treated. Colour TBC

W3 02

Beam: 254 x 146 x 31mm steel beam to be galvanised and powder coated. Colour TBC

820

Slip joint: As per Engineers Spec.

2425

Scale 1:25 All dimensions to be checked on site

555

1 W3 01

GLAZING:

Confirm Sill Height on Joinery Schedule.

30

385

255

Aluminium window: 50 x 50 x3mm SHS post beyond Aluminium window.

600

Insulation: Isotherm 75mm thick thermally bonded polyester thermal insulation (Density: 10 kg/m³), complying with SANS1381-1:2013, laid between exposed timber rafters. • R-value: 1.53m².K/W • Thermal conductivity: 0,039 W/mK

255

385

Lintels: Fabricated Concrete lintel 105 x 75mm. As per engineers specification.

OVERALL SIZE:

20°

Flue Flashing: Heat resistant flashing.

Timber - Or Swartland alternative (TBC) 2045mm x 900mm Side hung

Stacking

Timber Roof Truss: 152x50mm SA Pine Timber rafters spaced @ max. 1050mm c/c, with 76 x 50mm SA Pine Timber purlins. All timber used in the erection of the building to be treated against termite, borer attack & fungal decay in strict accordance to SANS 10005

165 85

Flue Flashing: Heat resistant and waterproof flashing.

Clear single low E Safety Glazing

FRAME MATERIAL:

U/S LINTEL

85

1180

1 Braai Area

Fascia board: Fibre cement fascia board 10mm x 150mm.

3215 x Top of Concrete 2960 x U/S Concrete Soffit

Rainwater: Aluminium Gutter 125 x 85mm domestic ogee profile gutter.

QUANTITY:

915

Sisalation: Sisalation 405 residential R-Value: 1.30 for under Sheeting. Roof: Rubber Closures to be used at end of roof.

2245

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

3600 x U/S Lintel Slot Window

SAFETY GLASS

Flashing: Sidewall Flash to match roof colour. (Livid Grey)

Storm Cowl: Stainless steelCOWL For Chimney Pipe – 200mm Diameter, Single Wall For Large Pizza Oven

3855 x Top of Beam

SAFETY GLASS

TOP SILL

Flashing: Roll top ridge flashing to match roof colour. (Livid Grey - AZ200)

GLAZING:

U/S WINDOW HEIGHT

Fixed window

THRESHOLD WATERPROOFING TO BE CONFIRMED WITH ALUMINIUM MANUFACTURER AND ARCHITECT. WINDOW AND DOOR SIZES TO BE CONFIRMED ON SITE BEFORE ORDERING.

4780 x New Roof Apex

U/S LINTEL HEIGHT

1765

QUANTITY:

OVERALL SIZE:

W6

Scale 1:25 All dimensions to be checked on site

50 x 50mm SHS posts in between windows

Top hung

2550 x 900mm

1 Kitchen Area

3625

U/S LINTEL HEIGHT

385

U/S WINDOW HEIGHT

Sliding Door

3785mm x 2550mm

QUANTITY:

2550

Clear single low E Safety Glazing

1

40

GLAZING:

QUANTITY:

835

OVERALL SIZE:

1 Braai Area

SCALE 1:25

2550

Cavity sliding Door

2880mm x 2550mm

Braai Area

QUANTITY:

ALL DIMENSIONS TO BE CONFIRMED ON SITE

850

Powder Coated Aluminium - Black

SCALE 1:25

195

FRAME MATERIAL:

ALL DIMENSIONS TO BE CONFIRMED ON SITE

Contractor to keep full set of drawings on site. Contractor is responsible for the correct setting out of the building on site with particular reference to boundaries and building lines. Contractor to verify all levels and dimensions on site and check same against architects drawings before commencing work. Figured dimensions to be used in preference to scaled dimensions. Large scale details to be used where available. Errors, discrepancies or omissions are to be reported to the architect immediately for clarification before work is undertaken. All drainage lines indicated are diagrammatic. Allow 30mm for floor finish and screed. Ensure a flush junction between different floor finishes. All necessary brick walls to be furnished with weepholes, wall ties, dpc etc. as per Contractor. External cavity walls to have galvanized wire ties provided at a rate of 4 tiles/sqm. All glazing to doors and windows to comply with SABS 0137 code of practice. Final earthworks to be checked and confirmed on site. All drawings to be read in conjunction with Engineer's Drawings & Fire Engineer's Drawings.

350

Braai Area

495

1

SCALE 1:25

1765

QUANTITY:

ALL DIMENSIONS TO BE CONFIRMED ON SITE

FFL

300

ALL DIMENSIONS TO BE CONFIRMED ON SITE

FFL

All dimensions to be checked on site

410

FFL

NOTE: IMPORTANT

835

1050

40

2100

HANDLE FIXED POSITION

SAFETY GLASS

2550

SAFETY GLASS

2550

SAFETY GLASS

570

SAFETY GLASS

2550

SAFETY GLASS

2550

WALL CAVITY

40

900

570

1500

PERSPECTIVE:

U/S LINTEL HEIGHT

80

U/S LINTEL HEIGHT

450

U/S LINTEL HEIGHT

W2 450

3785

D2

900

D1

HOUSE LE ROUX

900

410

Opening size 2880

FFL GROUND FLOOR

ERF NUMBER 694 Scale 1:25 All dimensions to be checked on site

QUANTITY:

1 Scullery Area

FRAME MATERIAL:

Powder Coated Aluminium - Black

OVERALL SIZE:

900mm x 2550mm

GLAZING:

Clear single low E Safety Glazing

Side Hung Door

ALLOTMENT WALMER DRAWN

SCALE AS SHOWN

SM

1 : 25 DWG USE

DATE ISSUED CHECK

07 11 2022 PROJECT No.

0147

DRAWING No. REV

CS 104

SACAP REG-24751337

WD BASSON (MArch NMMU, PrArch)cell : 084 331 2244

HOUSE LE ROUX PERSPECTIVE:

Garden Spot

Brand/Supplier

Pixel Spike 2223 Anti-Glare (White)

Type

Qty

Spazio

A

2

Spazio

B

12

Spazio

B(s)

9

TYPE B @ U/S OF CEILING

EQ

Recessed Downlights

Name

Contractor to keep full set of drawings on site. Contractor is responsible for the correct setting out of the building on site with particular reference to boundaries and building lines. Contractor to verify all levels and dimensions on site and check same against architects drawings before commencing work. Figured dimensions to be used in preference to scaled dimensions. Large scale details to be used where available. Errors, discrepancies or omissions are to be reported to the architect immediately for clarification before work is undertaken. All drainage lines indicated are diagrammatic. Allow 30mm for floor finish and screed. Ensure a flush junction between different floor finishes. All necessary brick walls to be furnished with weepholes, wall ties, dpc etc. as per Contractor. External cavity walls to have galvanized wire ties provided at a rate of 4 tiles/sqm. All glazing to doors and windows to comply with SABS 0137 code of practice. Final earthworks to be checked and confirmed on site. All drawings to be read in conjunction with Engineer's Drawings & Fire Engineer's Drawings.

EQ

600

Light Fixtures:

NOTE: IMPORTANT

TYPE B @ U/S OF CEILING

EQ

Unique Lighting

C

2

Exterior Wall Lights

Razor (Black)

Spazio

D

5

Pendant 1

Elemental Pendant in Dark (Large)

Haus by Hertex

E

1

TYPE B @ U/S OF CEILING steel beam over

TYPE I @ U/S OF JOINERY SHELVING & CEILING

S4 @ 1050MM AFFL

EX. Kitchen 20 m²

Brass Holder & DieCast Bulb

Unique Lighting

G

1

Surface-Mount Linear Light LED Strip Light

1400 Black Linear TBC

Unique Lighting TBC

H

1

I

See Schedule

TYPE 3 & S1 @ 1050MM AFFL

300

TYPE F POSITION & HEIGHT TBC ON SITE

W2 01

- PAIRS OF DOWNLIGHTERS TO BE SPACED 150MM FROM CENTER TO CENTER - FINAL DIMENSIONS TO BE TAKEN ON SITE - FINAL PENDANT LIGHT HEIGHTS TO BE CONFIRMED ON SITE - PLEASE TAKE NOTE OF POSITIONS WHERE SOCKETS AND SWITCHES LINE UP - WHERE SOCKETS SIT SIDE-BY-SIDE, ELECTRICIAN TO SPACE THEM 25MM APART FROM EDGE OF COVER TO EDGE OF COVER -ELECTRICIAN TO ALLOW ADDITIONAL CONDUITS IN SLAB FOR ADDITIONAL LIGHTS, WIFI EXTENDERS, ALARM EYES & BEAMS, ETC. FINAL POSITIONS OF LIGHT FIXTURES TO BE CONFIRMED BY ARCHITECTS & CLIENT ON SITE!!!!

3-Lever Switch

4-Lever Switch Single Socket

Double Socket Combination Socket

Matrix Onesto

White 4x4

Matrix Onesto

White 4x4

Matrix Onesto

S1 S2

600

2

CENTER TO LINE UP WITH CENTER OF WINDOW W7

TYPE 3 & S4 @ 1050MM AFFL

S3

-

White 4x4

Matrix Onesto

S4

3

White 4x4

Matrix Onesto

1

6

White 4x4

Matrix Onesto

2

1

White 4x4

Matrix Onesto

3

Isolator

White 4x4

Matrix Onesto

4

1

Pop-up Plug

TBC

Matrix Onesto

5

1

Distribution Board

N/A

As per elect. spec

6

1

WiFi Extender

Allow conduits

N/A

7

1

Alarm Eyes & Keypad

Allow conduits

N/A

8

1

TYPE 1 @ 300MM AFFL

TYPE 2 @ 300MM AFFL

6 m²

TYPE 1 @ 300MM AFFL

6

TYPE 3 @ 1050MM AFFL

TYPE E POSITION & HEIGHT TO U/S TBC ON SITE

TYPE B (S) @ U/S OF SOFFIT

27 m²

EQ

TYPE B (S) TYPE 1 @ 300MM AFFL

420

TYPE I ON TOP OF SLAB

TYPE D @ 1800MM AFTER GROUND FFL

1

D1 01

1 2 3

Ground Floor Plan Electrical 1 : 50

WALMER

357.3 sqm

wc

COVERAGE PERCENTAGE

23.5 %

EXISTING GROUND FLOOR AREA

232 sqm

EXISTING FIRST FLOOR AREA

12 sqm

ADDITIONAL AREA

37.3 sqm

BUILDING LINE REAR

1.5M

BUILDING LINE SIDE

1.5M

BUILDING LINE FRONT

5M

OR TRANSMITTED IN ANY FORM OR BY ANY MEANS IN PART OR IN WHOLE WITHOUT THE PERMISSION OF STRUKT ARCHITECTS. DO NOT SCALE - USE FIGURED DIMENSIONS ONLY. ALL LEVELS AND DIMENSIONS TO BE VERIFIED PRIOR TO COMMENCEMENT OF ANY WORK. REPORT ANY DISCREPANCIES IMMEDIATELY. SHOP DRAWINGS TO BE APPROVED PRIOR TO CONSTRUCTION. ALL WORK TO BE CARRIED OUT IN STRICT ACCORDANCE WITH NATIONAL BUILDING REGULATIONS, SOUTH AFRICAN NATIONAL STANDARDS, AND LOCAL AUTHORITY BY-LAWS.

2

EQ

TYPE D @ 1800MM AFTER GROUND FFL

W4 01

TYPE A ON GROUND LEVEL. FINAL POSITION TBC ON SITE

proposed tree

PROJECT EQ

1 : 50

ALLOTMENT AREA

New Braai Area

TYPE 3 & S4 @ 1050MM AFFL

RES 1

TYPE A ON GROUND LEVEL. FINAL POSITION TBC ON SITE

TYPE G @ BRAAI SPEC HEIGHT

Electrical Legend

1

ZONING

TOTAL COVERAGE

proposed tree

D2 01

1 520 sqm

1 m²

TYPE 6

TYPE H @ US OF SOFFIT

ERF (sqm)

37.3 sqm (2.5%)

TYPE B (S) @ U/S OF SOFFIT

TYPE 1 @ 300MM AFFL

694

ADDITIONAL COVERAGE

TYPE D @ 1800MM AFTER GROUND FFL

SOCKET & SWITCH TO LINE UP

EQ

2

whb

ERF nr.

320 sqm

TYPE 3 & 4 @ 1050MM AFFL

EQ

TYPE B(S) @ U/S OF SOFFIT concrete soffit above

1050MM AFFL

Scullery

concrete soffit above

....................................................................

EXISTING COVERAGE

EX. WC

TYPE C @ 2550MM AFFL

W1 01

D3 01 S1 @

W6 01

EQ

Architect

EQ

Qty

TYPE B @ U/S OF CEILING TO BE SWITCHED ON AT EXISTING PASSAGE LIGHT SWITCH

.............................................................................

NMBM MUNICIPALITY MUNICIPAL INFORMATION

TYPE 1 @ 300MM AFFL

TYPE 5 WITHIN JOINERY

braai

wifi

White 4x4

Type

200

2-Lever Switch

Brand/Supplier

Pizza Oven

1-Lever Switch

Name

ALLOW POWER IN CEILING FOR INTEGRATED EXTRACTOR FAN

W7 01

sink

Electrical Fixtures:

TYPE B @ U/S OF CEILING

TYPE D @ 1800MM AFTER GROUND FFL

Client

TYPE 1 @ 300MM AFFL

TYPE C @ 2550MM AFFL

sink

fulbore outlet

15 m²

steel beam over

TYPE 3 @ 1050MM AFFL

Please Note:

EX. Passage

bath

Braai Light

TYPE B @ U/S OF BULKHEAD

550

2

1465

F

2315

Unique Lighting

385

Glass and brass fitting

EQ

Pendant 2

drop bulkhead ceiling to match existing passage ceiling height

8 m²

Custom fitting powdercoated

600

Interior Wall Light

EQ

EX. Bathroom

2223 Anti-Glare (black)

overhang

Recessed Downlights in Slab

concrete soffit above

S

PROPOSED ALTERATION & ADDITION ERF 694 WALMER

TYPE B (S) @ U/S OF SOFFIT

TYPE I ON TOP OF SLAB

DRAWING

ELECTRICAL & LIGHTING LAYOUT TYPE D @ 1800MM AFTER GROUND FFL

CLIENT HOUSE LE ROUX

N

ERF NUMBER 694

ALLOTMENT WALMER DRAWN

SCALE AS SHOWN

SM

1 : 50 DWG USE

DATE ISSUED CHECK

07 11 2022 PROJECT No.

0147

DRAWING No. REV

CS105

1

SACAP REG-24751337

WD BASSON (MArch NMMU, PrArch)cell : 084 331 2244

HOUSE LE ROUX PERSPECTIVE:

HEAT PUMP

1180 4565

4650

2140 x Lintel Hieght of Braai

W1 01

D2 01

W4 01

805

D1 01

2555

2568 x U/S Lintel Height

1335 x Braai Height

925

Rainwater: 75x50mm fluted rectangular domestic aluminium down pipes.

W3 02

3215 x Top of Concrete 2960 x U/S Concrete Soffit

255 385

W5 01

410 x Ground Floor FFL

RDP NGL

RDP

NGL

Rainwater: 75x50mm fluted rectangular domestic aluminium down pipes.

SOUTH ELEVATION

EAST ELEVATION

Scale 1:50

Sisalation: Sisalation 405 residential R-Value: 1.30 for under Sheeting, with a ceiling for downwards heat-flow when used with minimum 15mm airspace.

Flashing: Roll top ridge flashing to match roof colour. (Livid Grey)

Aluminium window: 50 x 50 x3mm SHS post between Aluminium window top plates to be skimmed & plastered for a smooth finish, bottom plates to be counter sunk.

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang. DPC: 375 Micron DPC in cavity.

1180

Weep holes: Open perpends 900mm intervals to form weepholes

Ceiling: Plywood subframe painted black 2440 x 1220 x 15mm to be cut to form arch of ceiling for the 38 x 38mm SA PAR pine timber with 10mm spacing to be treated. Colour TBC

FLAT ROOF: One layer Derbigum SP4 waterproofing membrane, with 75mm side laps and 100mm end laps, sealed to primed surface to falls and crossfalls by `torchfusion` finished with two coats Roofcote bituminous aluminum paint. Waterproofing to be installed by an Approved Derbigum Contractor under a ten year guarantee.

9

Timber slatted ceiling to be fixed to underside of roof structure

385

9

....................................................................

Aluminium window: Silicone sealant between window frame and steel beam.

W5 01

3215 x Top of Concrete

694

ERF (sqm)

1 520 sqm

ZONING

RES 1

ALLOTMENT AREA

WALMER

EXISTING COVERAGE

320 sqm

ADDITIONAL COVERAGE

37.3 sqm (2.5%)

TOTAL COVERAGE

357.3 sqm

COVERAGE PERCENTAGE

23.5 %

EXISTING GROUND FLOOR AREA

232 sqm

EXISTING FIRST FLOOR AREA

12 sqm

ADDITIONAL AREA

37.3 sqm

BUILDING LINE REAR

1.5M

BUILDING LINE SIDE

1.5M

BUILDING LINE FRONT

5M

OR TRANSMITTED IN ANY FORM OR BY ANY MEANS IN PART OR IN WHOLE WITHOUT THE PERMISSION OF STRUKT ARCHITECTS. DO NOT SCALE - USE FIGURED DIMENSIONS ONLY. ALL LEVELS AND DIMENSIONS TO BE VERIFIED PRIOR TO COMMENCEMENT OF ANY WORK. REPORT ANY DISCREPANCIES IMMEDIATELY. SHOP DRAWINGS TO BE APPROVED PRIOR TO CONSTRUCTION. ALL WORK TO BE CARRIED OUT IN STRICT ACCORDANCE WITH NATIONAL BUILDING REGULATIONS, SOUTH AFRICAN NATIONAL STANDARDS, AND LOCAL AUTHORITY BY-LAWS.

Plaster band: 165mm Plaster band above window. W3 02

ERF nr.

Weep holes: Open perpends 900mm intervals to form weepholes

3600 x U/S Lintel Slot Window

255

Beam: 254 x 146 x 31mm Beam Colour TBC

4565

395

2960 x U/S Concrete Soffit

Architect

Flashing: Sidewall Flash to match roof colour. (Livid Grey)

DPC: 375 Micron DPC in cavity.

3855 x Top of Beam

.............................................................................

NMBM MUNICIPALITY MUNICIPAL INFORMATION

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

4780 x New Roof Apex

Contractor to keep full set of drawings on site. Contractor is responsible for the correct setting out of the building on site with particular reference to boundaries and building lines. Contractor to verify all levels and dimensions on site and check same against architects drawings before commencing work. Figured dimensions to be used in preference to scaled dimensions. Large scale details to be used where available. Errors, discrepancies or omissions are to be reported to the architect immediately for clarification before work is undertaken. All drainage lines indicated are diagrammatic. Allow 30mm for floor finish and screed. Ensure a flush junction between different floor finishes. All necessary brick walls to be furnished with weepholes, wall ties, dpc etc. as per Contractor. External cavity walls to have galvanized wire ties provided at a rate of 4 tiles/sqm. All glazing to doors and windows to comply with SABS 0137 code of practice. Final earthworks to be checked and confirmed on site. All drawings to be read in conjunction with Engineer's Drawings & Fire Engineer's Drawings.

Client

Insulation: Isotherm 75mm thick thermally bonded polyester thermal insulation (Density: 10 kg/m³), complying with SANS1381-1:2013, laid between exposed timber rafters. • R-value: 1.53m².K/W • Thermal conductivity: 0,039 W/mK

Timber Roof Rafters: 152x50mm SA Pine Timber rafters spacing according to specialist, with 38 x 38mm SA Pine Timber Battens.

NOTE: IMPORTANT

Rainwater: Stainless steel pipe (75mm Ø) with welded stainless steel tab to support galvanized chain.

WEST ELEVATION Roof sheeting: Global Roofing Solutions 0.53mm thick 762mm cover Corrugated profile Ultra AZ200 spelter G550 Clean Colorplus® slate finish topcoat and Shadow Grey backing coat roof sheeting, fixed to timber intermediate purlins at MAX 1200mm centres and eaves and ridge purlins at MAX 1200mm centres (final spacing to be calculated by an Engineer) using Hex Flange Head + EPDM Seal self-drilling Type 17 drill point, No. 12-11 x 65mm long fasteners (fastener lengths may vary depending on the insulation used or requirements). Purlin fixed to first, fourth and eighth crest of each sheet and at all crests at sheet ends, all following the manufacturer`s specifications by a GRS approved contractor. • Brand: BlueScope • Type of Building: residential • Roof Pitch: 20° • Climatic Condition: from 400m to 5km of the coast - Zone C4/C5 High Corrosion Risk • Roof Profile: Corrugated • Material: Clean Colorbond® Ultra • Material Gauge: 0.53mm • Colour: Slate.

820

3855 x Top of Beam 3600 x U/S Lintel Slot Window

925

W2 01

1335 x Braai Height

Rainwater: Stainless steel pipe (75mm Ø) with welded stainless steel tab to support galvanized chain.

805

W6 01

Plaster band: 190mm Plaster band above window.

3920

2140 x Lintel Hieght of Braai

3855 x Top of Beam 3600 x U/S Lintel Slot Window

Flue: STAINLESS STEEL Flue Pipe – 200mm Diameter, Single Wall For Large Pizza Oven

Plaster band: 150mm Plaster band above window.

3215 x Top of Concrete 2960 x U/S Concrete Soffit

425

2568 x U/S Lintel Height

425

2568 x U/S Lintel Height

D1 01

W1 01

2140 x Lintel Hieght of Braai

D2 01

375

New Braai Area 27 m²

geyser installation to comply with sans 10254

430

2555

1767 x Front Boundary Wall

1335 x Braai Height

diffuser pipe

330

25∅

925

SAFETY GLASS

Concrete: Cast in place Concrete seat.

Aluminium Sliding door: Weather step.

New concrete floor finish TBC

410 x Ground Floor FFL

DPC: 375 Micron DPC under new concrete floor.

hot water feed

22∅

cold water feed

450

410 x Ground Floor FFL

Plaster band: 165mm Plaster band above window. Plaster band: 150mm Plaster band above window.

Storm Cowl: Stainless steelCOWL For Chimney Pipe – 200mm Diameter, Single Wall For Large Pizza Oven

4780 x New Roof Apex

3920

W3 01

4780 x New Roof Apex

Storm Cowl: Jetmaster 275mm Mild Steel Storm Cowl.

Rainwater: Aluminium Gutter 125 x 85mm domestic ogee profile gutter.

Rainwater: 75x50mm fluted rectangular domestic aluminium down pipes.

3445

3215 x Top of Concrete 2960 x U/S Concrete Soffit

Flue Flashing: Heat resistant and waterproof flashing.

Braai Flue: 1200mm x 275 Ø Mild steel Flue pipes.

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

2555

Rainwater: Aluminium Gutter 125 x 85mm domestic ogee profile gutter.

1140

Flue Flashing: Heat resistant and waterproof flashing.

Braai Flue: 1200mm x 275 Ø Mild steel Flue pipes.

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

Storm Cowl: Jetmaster 275mm Mild Steel Storm Cowl. Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

400 250 385

3855 x Top of Beam 3600 x U/S Lintel Slot Window

Braai Flue: 1200mm x 275 Ø Mild steel Flue pipes.

1140

Flue: STAINLESS STEEL Flue Pipe – 200mm Diameter, Single Wall For Large Pizza Oven

Parapet: Roof parapet walls to be finished off with a plaster band coping, 85mm thick with 50mm overhang.

4780 x New Roof Apex

Storm Cowl: Jetmaster 275mm Mild Steel Storm Cowl.

1180

Aluminium window: 50 x 50 x3mm SHS post between Aluminium window top plates to be skimmed & plastered for a smooth finish, bottom plates to be counter sunk.

Storm Cowl: Stainless steelCOWL For Chimney Pipe – 200mm Diameter, Single Wall For Large Pizza Oven

cw

22∅

hot water storage tanks

cw

540

22∅

hw Surface Bed: 120mm rthick mesh reinforced concrete slab as per engineers details.

heat pump

Cavity wall: Un-Reinforced concrete cavity infill.

Concrete footing: As per Engineers details.

7.4kw heat pump installation to comply with sans 10254 power by isolator switch 15 amp circuit breaker by others min r-value of hot water pipe insulation 1.0 sans 204(4.5.2)

SECTION A-A

GYSER DIAGRAM

Scale 1:25

Scale 1:100

cw 22∅

PROPOSED ALTERATION & ADDITION ERF 694 WALMER DRAWING

ELEVATIONS AND SECTION

22∅

hw

22∅

PROJECT

CLIENT heat pump to 100litre geyser

HOUSE LE ROUX

ERF NUMBER 694

ALLOTMENT WALMER DRAWN

SCALE AS SHOWN

SM

As indicated DWG USE

DATE ISSUED CHECK

07 11 2022 PROJECT No.

0147

DRAWING No. REV

CS 103

SACAP REG-24751337

WD BASSON (MArch NMMU, PrArch)cell : 084 331 2244

Turn static files into dynamic content formats.

Create a flipbook