feelings under the sun
umbrella
UMBRELLA - SUN collection
1
INDEX SUN COLLECTION
NEW YORK
side post umbrella
3
4-9 10-13
JALISCO CONTRACT
14-17
side post umbrella
DISCOVERY DESIGN
side post umbrella
MARINER
central pole umbrella
JALISCO DELUXE
side post umbrella
IRIS
central pole umbrella
APOLLO central pole umbrella
SERENISSIMA
sun tends
18-21
22-23 24 25 26-31
PROFESSIONAL UMBRELLAS
32
MULTIPLO
34-37
MULTIPLO STEELWOOD
38-45
MULTIPLO METALWOOD
46-49
TECHNICAL SHEETS
50-56
TECHNICAL SHEETS
57-61
PACKAGING
62-63
modular system umbrella
modular system umbrella
umbrella
multiplo
SUN
COLLE CT I ON UM BRE LL A
SKÆMA® is a company with thirty years’ experience in the field of garden and beach furnishings. Thanks to the use of high-performance materials and the care dedicated to manufacturing, it realizes quality products. Wholly Italian quality both in the functional features and in the careful attention given to design.
4
UMBRELLA - SUN collection
new york
The supporting stainless steel structure, the attention to detail and the finishings make NEW YORK a high quality object. A product which combines elegant design with cutting edge technology and the precision developed over years of experience. UMBRELLA - SUN collection
5
Opening system It's controlled by a small winch; a special pulley system permits “gearing down� of the strength for the operation, making it effortless.
Covering frame The covering frame is completed by wooden ribs, painted black using exclusively water-based products. The clamping system of the ribs to runner and hub enable their easy replace.
6
UMBRELLA - SUN collection
new york
NEW YORK is provided with the SKÆMAŽ anti-tilt system which creates greater stability for the cover, as well as for proper alignment with respect to the ground.
Fabric The offered fabric for covering is produced in a silver-coloured reflective synthetic fibre.
UMBRELLA - SUN collection
7
new york
Base Designed to completely contain the ballast plates without them protruding, it also functions as a convenient flat resting surface. The two side handles allow easy relocation. In addition, all edges are rounded off to avoid dangerous contacts.
Pole rotation By simply unscrewing the hand wheel found at the bottom of the pole, it is possible to rotate the entire umbrella up to 360째 without compromising its stability. This allows the shade to be shifted to the desired position.
UMBRELLA - SUN collection
9
JALI SCO
10
UMBRELLA - SUN collection
D E LUXE
Thanks to its versatility and the vast array of available dimensions, JALISCO is a product that is easily adapted to various types of situations. The attention taken with every mechanical detail guarantees excellent reliability as well as simple maintenance.
UMBRELLA - SUN collection
11
JALI SCO
D E LUXE
Structure The weight bearing structure consists of a wooden pole and an arm in painted aluminium. All metal components are made from zinc-painted steel.
Cover The cover fabric is acrylic with an excellent level of water repellence, available in the standard colours tortora or black.
Anti-tilt system JALISCO is provided with the SKÆMAŽ anti-tilt system which creates greater stability for the cover, as well as for proper alignment with respect to the ground.
UMBRELLA - SUN collection
13
JALI SCO
14
UMBRELLA - SUN collection
CO NTR ACT
Structure The weight bearing structure consists of a wooden pole and an arm in painted aluminium. All metal components are made from zincpainted steel.
UMBRELLA - SUN collection
15
Anti-tilt system JALISCO Contract is provided with the SKÆMAŽ anti-tilt system which creates greater stability for the cover, as well as for proper alignment with respect to the ground.
Sliding pulley The system, which makes sliding of the stainless steel cable easier, is composed of a pulley (also in stainless steel) and two "bushings" made of self-lubricating nylon. These serve as bearings, guaranteeing that the pulley will continue to slide easily over time.
Base Designed to completely contain the ballast plates without them protruding, it also functions as a convenient flat resting surface. The two side handles allow easy relocation. In addition, all edges are rounded off to avoid dangerous contacts. .
16
UMBRELLA - SUN collection
JALI SCO
CO NTR ACT
Cover The cover fabric is acrylic with an excellent level of water repellence, available in the standard colours white or beige/ecru.
UMBRELLA - SUN collection
17
D I SCOVE RY
design
Discovery design is the smallest model of the line of side-post umbrella that is part of the SUN collection. The structure and components are made of aluminium and zincpainted steel, guaranteeing a structure that is lightweight, robust, and lasts over time.
18
UMBRELLA - SUN collection
L-brackets The union between the arm and the pole is realized with an innovative system composed of two symmetrical plates (L-brackets) which are easy to screw in and have a pleasing appearance.
Concealed cord The cord for opening the umbrella is located inside the column.This detail, along with the care in realizing the system for fastening the frame, provide the model with aesthetic value.
D I SCOVE RY
design
Details The use of stainless steel bolts and screws testifies to the attention and care paid to each part of the product.
Base
Variations
Created with a steel crosspiece, it is easy to assemble, requiring insertion of four ballast plates. The assembling bolts and screws are made of stainless steel.
20
UMBRELLA - SUN collection
DISCOVERY design is offered either painted white, or with a wood effect paint.
Cover DISCOVERY design is available with either a square or circular cover. The fabric used for the cover is polyester, in a vast array of colours, to which the finishing border is then matched.
I RI S The versatility of the Iris model can be seen in the total of 9 different cover dimensions, which include hexagonal, square, and rectangular. Each can satisfy a different need.
22
UMBRELLA - SUN collection
Structure Pole and eight interchangeable ribs, made completely of wood and finished with care. The cover is made of Dralon acrylic fabric in a white or ecru colour.
M ARI NE R
Light, manoeuvrable, and utilizable in many different situations: these are the characteristics that make this umbrella a permanent fixture in our product line.
Structure The structures of the Mariner and Apollo models are composed of a pole and eight or six ribs, respectively, in painted aluminium. The cover is made from a polyester fabric and the flounce is finished with a small border. The Mariner model is available either square or octagonal, while Apollo is available either rectangular or hexagonal.
24
UMBRELLA - SUN collection
APOLLO Created for the family, while still maintaining a high professional standard, Apollo is the ideal product for the garden.
26
UMBRELLA - SUN collection
serenissima An elite product featuring high quality and refined technology, with an important past, just like the Maritime Republic of Venice. SERENISSIMA reproduces down to the smallest details the features of the coverings installed on the vessels of Venice from the 18th to the 19th centuries. Italian quality and design.
UMBRELLA - SUN collection
27
Like a sunfl ower Being able to turn the canopy depending on the position of the sun was very important to fi shermen who were used to spending entire days out in the sun. Today, this system is back, thanks to the same systems used then: the overhand knot set against the chestnut-oak, the loops to be pulled or loosened to adjust inclination and provide protection from the sun.
28
UMBRELLA - SUN collection
Description Resting on two bases where the loadbearing masts were placed, the canopy extended thanks to the cross of two mooring lines and the crosspiece of the bragozzo, thus forming the main support of the structure. Lifts, angular tie lines, toggles, blocks and returns, indeed the all tools used in Venetian seafaring, made it possible to fasten the canopy to the two masts. Once the desired height is reached, another rope makes it possible to secure it, while an overhand knot makes it possible to adjust the inclination of the canopy at will by loosening or pulling the ends of the rope. Nothing is left to chance: every single element of the SERENISSIMA canopy, its shape and the way of producing it tell of a piece of history of the sea of the Republic of Venice and its men.
Solid and elegant bases The bases are realized in zinc-painted steel and support granite ballasts of standard sizes which are easily available on the market. The design elegant and with the shaft forms a harmonious blend.
Free from insect bites To complete the harmonious design which recalls the elegance of the homes of nobility, the Rialto canopy includes and insect screen realized in lightweight, functional materials. Constructed with a simple pulley system, it is divided into four sections which intersect which each other at the height of the shafts and along the open sides of the canopy, thus ensuring complete protection from insects. It only takes one small cord to raise and lower the insect screen.
30
UMBRELLA - SUN collection
Mooring line to anchor the canopy to the crosspiece
Mooring line with two eyelets to support canopy in middle
Tie with 5 eyelets to support the ends of the crosspiece
Strap with block equipped with pulley
Rope with one end with large toggle to raise canopy
Angular tie line with one end equipped with small toggle for canopy adjustment
Mooring line with 2 eyelets equipped with thimbles, for return
Attention to details SKÆMA® does not neglect details, from the leather sleeve to protect the shaft to the components in metal to the cleats where the ropes are anchored. All the details of SERENISSIMA are manufactured with the care which is typical of traditional Venetian craftsmanship.
Cleat where ropes are tied
UMBRELLA - SUN collection
31
32
UMBRELLA - MULTIPLO collection
professional umbrellas MU LT I PLO steelwood & metalwood
UMBRELLA - MULTIPLO collection
33
MULTI PLO steelwood & metalwood
To say that Multiplo is a simple umbrella might be a real understatement. In fact, it is a highly flexible top-quality modular system, designed with numerous and innovative technical details. These technical and functional features make Multiplo a state-of-the-art system in the sector, a new type of umbrella in terms of use, duration and function.
MULTI PLO
steelwood & metalwood
exclusive arrangements
Guaranteed anchorage To guarantee umbrella stability, the balancing base can be: weighted 24 slabs in washed fine gravel (40x40 cm), easily found on the market (not supplied), must be inserted into the spaces provided. underground Skæma has designed a special unit so that the base can be effectively and quickly inserted underground.
SKAEMA® balancing base
A mechanical “chameleon” Multiplo umbrella with 2 arms
Multiplo umbrella with 3 arms
36
Multiplo umbrella with 2 opposite arms
Multiplo umbrella with 4 arms
UMBRELLA - MULTIPLO collection
An intelligent system which, thanks to its versatility, allows the creation of umbrellas with two, three and four covers, for a total of fourteen different combinations.
Non-tilt system windproof
UMBRELLA - MULTIPLO collection
37
Steelwood To implement the Steelwood serie of Multiplo umbrella, SkĂŚma has used top-quality materials guaranteed to last:
Wood
Iroko and Ramino for the pole, arms, and ribs, treated with ecological water-based varnishes, which provide beautiful materials while respecting the environment.
Stainless steel
All metal components that connect and support the frame are resistant and weatherproof, guaranteeing stability and safety for the umbrella.
38
UMBRELLA - MULTIPLO collection
One base, two tilting positions The Skæma balancing base (like the multiple plate) has been designed to use with both the Multiplo models with 2 arms, which require a tilted pole, and with Multiplo models with 3 or 4 arms, which, instead, require a pole that is perpendicular to the ground. This dual-purpose has been obtained thanks to the Skæma patented system of angled planes, which vary pole tilting with a simple rotation of the upper part of the base by 180°.
A revolutionary idea The Skæma multiple plate, which acts as a connector between the umbrella arm and pole, is a revolutionary idea that makes Multiplo modular. It is in metal and comprises two superimposed plaques that squeeze the wood arms together like a “sandwich”. This plate can support 2, 3 or 4 arms at the same time. With this special detail, it is possible to change the umbrella type and size over time from 2 to 3 or 4 arms without having to replace or reassemble the pole and its base.
Steelwood
Large spaces covered, with minimal obstruction on the ground These images testify to the wonderful flexibility and effectiveness of the MULTIPLO modular system. In fact, in the case shown here, an irregularly-shaped surface of about 150 square meters was covered using eleven covers sustained by only four poles. In this way, obstructions on the ground were reduced to a minimum.
Windproof The Skæma non-tilt system allows the covers to be correctly positioned and aligned. It has been designed with special tolerances to: A) Provide correct but not excessive resistance to wind action (breakage prevention). B) Avoid the annoying and typical “sail” effect that affects covers when windy.
UMBRELLA - MULTIPLO collection
41
42
UMBRELLA - MULTIPLO collection
Steelwood
UMBRELLA - MULTIPLO collection
43
Duration and easy replacement For the Steelwood range in the Multiplo line, the rib coupling elements are protected with steel connectors. It allow a longer endurance of the wood, an accurate and reliable device, and an easy replacement of ribs.
Easy opening system In order to eliminate any possible problems during opening, we have designed the form of the ends of the ribs in order to prevent them from “lining up� annoyingly.
44
UMBRELLA - MULTIPLO collection
Minimum effort when opening With the Multiplo system, opening and closing of each cover is controlled by a small winch; a special pulley system permits “gearing down� of the strength required for the operation, making it effortless. This device fits into a protective small steel box.
Steelwood UMBRELLA - MULTIPLO collection
45
ME TALwood The Metalwood line of Multiplo umbrellas is created using quality materials that have been proven reliable.
Wood
Iroko and Ramino for the pole, arms, and ribs, treated with water-based environmentally friendly paints that maintain the beauty of the material while respecting the environment.
Painted galvanized steel
Resistant and protected from external factors. This is the material used for the metallic parts that unite and support the structure, guaranteeing the stability and safety of the umbrella.
Stainless steel
This is the material used for the bolts and screws used in assembly.
46
UMBRELLA - MULTIPLO collection
UMBRELLA - MULTIPLO collection
47
Covering frame The wooden covering frame is completed by painted ribs using exclusevely water-based products. The clamping sistem of the ribs to runner and hub enable their easy replace.
Metallic parts In the picture here, it is possible to see the difference in the materials used for the metallic parts in the two lines: In fact, the steel used in the Metalwood series is galvanized and painted an anthracite colour.
48
UMBRELLA - MULTIPLO collection
ME TALwood
50
UMBRELLA - technical specifications
TECHN I CAL SHE E T S
UMBRELLA - technical specifications
51
NE W YORK
DIMENSION A
4.380 mm
B
4.000 mm
H
3.300 mm
Hsb
2.460 mm
hsbc
850 mm
Hp
Stainless steel AISI 304 section 100x100 mm
hub/runner
pole
base
Standard base or buried base are included. Excluded 6 stone slabs 50x50 cm
Stainless steel
frame color
Mehler Airtex
ribs
fabric
Optional rafia fabric
easy opening umbrella with a manual winch mechanism
52
360° rotable
fastners
8 wood ribs section 17x37 mm black painted using water-based paint
winch
Round Ă˜400
wood black painted using water-based paint
Stainless steel A1/A2
Stainless steel AISI 304 section 100x100 mm
arm
2.690 mm
winter cover
UMBRELLA - technical specifications
anti-tilt system
jalisco
deluxe / con tract
DIMENSION:
300x300
300x400
400x400
A
3.270 mm
3.500 mm
4.380 mm
4.350 mm
B
3.070 mm
4.040 mm
4.040 mm
3.980 mm
H
3.110 mm
3.160 mm
3.530 mm
3.530 mm
Hsb
2.300 mm
2.350 mm
2.540 mm
2.480 mm
hsbc Hp
Square 300x300 400x400
only for Jalisco Contract
180 mm
970 mm
2.900 mm
2.900 mm
Ø400
arm
360° rotable
frame color wood walnut or white painted using water-based paint
hub/runner
Standard base or buried base are included. Excluded 6 stone slabs 50x50 cm
anti-tilt system
only for Jalisco Contract
ribs
Painted aluminium section 80x80 mm
base
180 mm 2.660 mm
8 wood ribs section 17x37 mm walnut or white painted using water-based paint
Wood section 100x100 mm
pole
570 mm 2.660 mm
Round
rectangular 300x400
Ø400
Metallic Anthracite White ( only for deluxe )
Acrylic Dralon - Olefin Ecrù / white / tortora
fabric
Stainless steel A1/A2
fastners
Optional rafia fabric
winter cover
easy opening umbrella with a manual winch mechanism
winch
UMBRELLA - technical specifications
Optional acrylic Dralon
gutter
53
discovery
DIMENSION:
300x300
Ø350
A
3.200 mm
3.740 mm
B
2.900 mm
3.450 mm
H
2.780 mm
2.820 mm
Hsb
2.030 mm
1.980 mm
arm
Round Ø350
wood painted white painted
frame color
ribs
Painted aluminium section 80x80 mm
Plastic
hub/runner
Standard base included. Excluded 4 stone slabs 50x50 cm
base
Square 300x300
8 aluminium ribs section 15x25 mm wood or white painted
Painted aluminium section 80x80 mm
pole
design
Olefin Ecrù / white
textilene
Stainless steel A1/A2
fastners
Optional rafia fabric
winter cover easy opening umbrella with a manual winch mechanism
winch
54
UMBRELLA - technical specifications
Optional Olefin
gutter
iris opening
Square 250X250 300x300 400x400
Round
Rectangular 200x300 300x400
Ø300 Ø350 Ø400
Wood Ø48mm / Ø58mm
Optional rafia fabric
winter cover
Wood
pole
package
hub/runner Not included
pole, ribs, hub and runner wood walnut painted using water-based paint
base
Manual opening system facilitated with two pulleys
250x250 - 0,34 mc 300x300 - 0,35 mc 400x400 - 0,37 mc 200x300 - 0,34 mc 300x400 - 0,35 mc Ø300 - 0,34 mc Ø350 - 0,34 mc Ø400 - 0,34 mc
frame color 8 wood ribs section 17x37 mm
Acrylic Dralon Ecrù / white
ribs
weight
textilene
mariner
Manual opening system facilitated with single pulley
Aluminium Ø50 mm
pole
opening
Not included
Square 200x200 250x250 300x300
Round Ø300 Ø350 Ø400
250x250 - 14 kg 300x300 - 19 kg 400x400 - 25 kg 200x300 - 13 kg 300x400 - 21 kg Ø300 - 13 kg Ø350 - 15 kg Ø400 - 20 kg
base
Olefin Ecrù / white
textilene 8 aluminium painted ribs section 15x25 mm
ribs
Optional rafia fabric
winter cover
Plastic
hub/runner
package
white / anthracite
frame color
UMBRELLA - technical specifications
weight
250x250 - 0,17 mc 300x300 - 0,17 mc 400x400 - 0,18 mc Ø300 - 0,18 mc Ø350 - 0,18 mc Ø400 - 0,18 mc 250x250 - 7 kg 300x300 - 8 kg 400x400 - 9 kg Ø300 - 7 kg Ø350 - 9 kg Ø400 - 11 kg
55
apollo white / anthracite
Aluminium Ø40 mm
pole
frame color Not included
Rectangular 200x300
Round Ø250 Ø300
Olefin Ecrù / white
base
textilene 5 aluminium painted ribs section 15x25 mm
Optional rafia fabric
ribs
winter cover
Plastic
hub/runner
package Manual opening system facilitated with single pulley
opening
weight
200x300 - 0,17 mc Ø250 - 0,17 mc Ø300 - 0,17 mc
200x300 - 6 kg Ø250 - 5 kg Ø300 - 6 kg
serenissima H
DIMENSION: D
A
5.500 mm
B
3.000 mm
C
4.000 mm
D
3.450 mm
H
3.170 mm
B
C A
pole
base
56
Acrylic Dralon Ecrù / white
included
2 wood poles section Ø80mm
mosquito net 2 painted steel bases. 4 stone labs 40x40 cm excluded
wood
frame color
UMBRELLA - technical specifications
textilene
multiplo technical sheets
UMBRELLA - technical specifications
57
multiplo Multiplo 2B DIMENSION:
600x300
700x350
800x400
A
3.070 mm
3.560 mm
4.040 mm
B
6.330 mm
7.280 mm
8.200 mm
C
3.470 mm
3.960 mm
4.440 mm
H
3.530 mm
3.570 mm
3.740 mm
Hsb
2.300 mm
2.300 mm
2.300 mm
690 mm
270 mm
110 mm
Hsbc
Multiplo 2BC
2BC 600x300/700x350/800x400
2BC 800x300
2BC 600x400
DIMENSION:
600x300
700x350
800x400
800x300
600x400
A
3.070 mm
3.560 mm
4.040 mm
4.040 mm
3.070 mm
B
6.410 mm
7.390 mm
8.360 mm
8.360 mm
6.430 mm
3.070 mm
4.040 mm
C H
3.035 mm
3.280 mm
3.420 mm
3.120 mm
3.020 mm
Hsb
2.180 mm
2.320 mm
2.370 mm
2.250 mm
2.170 mm
490 mm
250 mm
100 mm
40 mm
130 mm
Hsbc
58
UMBRELLA - technical specifications
multiplo
Multiplo 3B DIMENSION:
600x600
700x700
800x800
A
3.070 mm
3.560 mm
4.040 mm
B
6.200 mm
7.350 mm
8.290 mm
D
2.490 mm
3.065 mm
3.535 mm
H
3.210 mm
3.360 mm
3.380 mm
Hsb
2.300 mm
2.300 mm
2.300 mm
690 mm
380 mm
130 mm
Hsbc
Multiplo 4B DIMENSION:
600x600
700x700
800x800
A
3.070 mm
3.560 mm
4.040 mm
B
6.200 mm
7.350 mm
8.290 mm
H
3.210 mm
3.360 mm
3.380 mm
Hsb
2.300 mm
2.300 mm
2.300 mm
690 mm
380 mm
130 mm
Hsbc
UMBRELLA - technical specifications
59
multiplo
MULTIPLO 2B 600x300 - A3201101 700x350 - A3201201 800x400 - A3201301
steelwood
MULTIPLO 2BC 600x300 - A3401101 700x350 - A3401201 800x400 - A3401301 800x300 - A3401501 600x400 - A3401201
hub/runner
pole
base
Wood walnut painted using water-based paint or grey painted alluminium. Section 100x100 mm
Standard base or buried base are included. Excluded 24 stone slabs 40x40 cm
easy opening umbrella with a manual winch mechanism
winch
Stainless steel A1/A2
fastners
Optional rafia fabric
winter cover
Stainless steel AISI 304
frame color
8 wood ribs section 20x40 mm walnut painted using water-based paint
ribs
MULTIPLO 4B 600x600 - A3301101 700x700 - A3301201 800x800 - A3301301
wood walnut water-based paint
Wood section 143x143 mm
arm
MULTIPLO 3B 600x600 - A3501101 700x700 - A3501201 800x800 - A3501301
textilene
Optional a solution dyed acrylic
gutter
Solution dyed acrylic fiber. Beige standard color. Other color on request
anti-tilt system
60
UMBRELLA - technical specifications
multiplo
metalwood
MULTIPLO 2B 600x300 - A4201102 700x350 - A4201202 800x400 - A4201302
MULTIPLO 2BC 600x300 - A4401102 700x350 - A4401202 800x400 - A4401302 800x300 - A4401502 600x400 - A4401202
hub/runner
pole
base
Wood walnut painted using water-based paint or anthracite painted alluminium. Section 100x100 mm
Standard base or buried base are included. Excluded 24 stone slabs 40x40 cm
MULTIPLO 4B 600x600 - A4301102 700x700 - A4301202 800x800 - A4301302
wood walnut water-based paint
Wood section 143x143 mm
arm
MULTIPLO 3B 600x600 - A4501102 700x700 - A4501202 800x800 - A4501302
Optional rafia fabric
winter cover
Optional acrylic Dralon
Stainless steel A1/A2
fastners
gutter
Galvanized and painted steel anthracite color.
frame color anti-tilt system
ribs
8 wood ribs section 17x37 mm walnut painted using water-based paint
textilene
Acrylic Dralon Standard ecr첫 color White on request
UMBRELLA - technical specifications
61
SU N COLLE CT I ON - PACK AG I NG NEW YORK Ø400
pole/arm
300x400 400x400 Ø400
DISCOVERY 300x300 Ø350
62
294
269
269
294
ballast (not included)
12
0,58
83
6 stones 50x50 - 104 kg
12
0,62
86
6 stones 50x50 - 104 kg
12
0,66
90
6 stones 50x50 - 104 kg
12
0,60
85
6 stones 50x50 - 104 kg
total volume MC
weight Kg
ballast (not included)
23
0,38
60
4 stones 50x50 - 76 kg
23
0,38
60
4 stones 50x50 - 76 kg
total volume MC
weight Kg
ballast (not included)
0,68
50
4 stones 50x50 - 76 kg
cover
221
221
23
pole
base
20
x2
115
84
115
84
115
84
32 246
23
259
84
32 306
32
259
115
32
32
294
324
weight Kg
286
32
20
30
total volume MC
32
20
50
6 stones 50x50 - 104 kg
246
32
pole/arm/base
50
104
12 84
base
18 43
0,66
cover
18 43
ballast (not included)
115
18 43
weight Kg
32
18 43
total volume MC
246
32
pole/arm
SERENISSIMA 300x400
base
18 43
JALISCO 300x300
cover
117
25 99
UMBRELLA - technical specifications
MU LT I PLO - PACK AG I NG 2B 600x300 700x350 800x400
pole
32 32
700x350 800x400 800x300 600x400
700x700 800x800
700x700 800x800
231
41
276
292
306
arms
32 32
292
32
41
32 32
292
41
32 32
292
231
arms
32 292
292
231
292
276
306
32
292
231
292
52
52
52
x2
x2
276
x2
306
x2
52
52
52
52
52
52
52
32
52
52
286
306
286
286
246
286
52
52
52
52
306
weight Kg
15
1,51
222 steelwood 209 metalwood
15
1,63
234 steelwood 219 metalwood
15
1,69
244 steelwood 228 metalwood
total volume MC
weight Kg
124
15
1,51
216 steelwood 205 metalwood
124
124
15
1,59
224 steelwood 215 metalwood
124
124
15
1,63
238 steelwood 224 metalwood
x2
124
124
15
1,59
229 steelwood 209 metalwood
x2
124
124
15
1,59
213 steelwood 204 metalwood
x2
total volume MC
weight Kg
1,93
268 steelwood 248 metalwood
2,06
287 steelwood 265 metalwood
2,12
302 steelwood 278 metalwood
total volume MC
weight Kg
2,19
314 steelwood 287 metalwood
2,42
339 steelwood 310 metalwood
2,54
359 steelwood 327 metalwood
base
x3
124
124
124
124
x3
124
124
x3
15
15
15
base
32 32
246
x4
124
124
124
124
124
124
32
59
59
x2
cover
59
59
x2
124
32 32
total volume MC
base
32 32
upper stump
52
124
32 32
59
52
x2
cover
59
59 52
18 41
52
59
foot
246
59 52
124
32
upper stump
59
18 41
32 32
52
18 41
32 32
x2
arms
292
52
18 41
pole
32
x2
52
59 52
18 41
32 32
foot
306
59 52
52
18 41
32 32
59 52
32
52
x2
32
59 52
52
18 41
pole
32
59 52
32
52
124
32
59 52
52
124
32 32
52
124
32 32
52
286
cover
59 52
52
18
32
59 52
x2
124
32
59
59 52
231
52
59 52
231
52
32
upper stump
52
18
32
52
59 52
231
52
246
32
59
59
18 41
292
52
18 41
292
52
foot
231
32 32
52
base
32 32
52
59 52
cover
59 52
52
18 41
upper stump
59 52
18
pole
4B 600x600
292
foot
18 41
32 32
3B 600x600
292
32 32
2BC 600x300
arms
32
286
x4 32
59 32
306
x4
15
15
15
ballast (not included)
all MULTIPLO umbrellas
24 stones 40x40 - 312 kg
UMBRELLA - technical specifications
63
feelings under the sun
HEAD OFFICE:
SKAEMA
Room2106,21/F, Emperor Group Center 288 Hennessy Road, Wanchai, HONG KONG TEL. +852.21807634 info@skaema.com.hk MANUFACTORY:
SKAEMA
82, Shunxiang Road, Fengxiang, Shunde 528300 FOSHAN (China) TEL. +86.18603090505 manufactory@skaema.com.hk EUROPE OFFICE: C/O PATIO DESIGN SRL Via Argine San Marco, 2 30016 JESOLO (Venezia), Italy TEL. +39.0421.359831 FAX +39.0421.359900 europe@skaema.com.hk info@patiodesign.it W W W. S K A E M A .CO M . H K