www.hwk-skiwax.com
LowFluor WAX
hwk skiwax app >> www.hwk-skiwax.com <<
A1 allround is a universal paraffin wax for all types of snow. Use mainly for training, as well as racing under dry snow conditions. (Also for prep of new skis) (A1 all-round does not contain fluorine)
ÖSV-LF is a wax containing fluor that the ÖSV uses successfully for racing and training (Alpine & Nordic). This wax is a good base for all the other waxes and special fluor waxes.
LFW1 (F1) Perfectly suitable for snow conditions between slightly wet snow and very wet snow. LFW1 is mainly used as a training wax or base wax.
Air temperature: +10°C to -10°C Humidity: all levels Ironing temperature: approx. 120°C
Air temperature: +10°C to -10°C Humidity: all levels Ironing temperature: approx. 120°C
Air temperature: +10°C to -2°C Humidity: all levels Ironing temperature: approx. 100°C
LFW2 (K1) is made with an optimal fluorine content to allow for great results in all types of snow with low humidity levels. LFW2 is a great base layer.LFW2 is the most commonly used Alpine wax! LFW 2 Nero (K1 nero) is therefore suitable for dirty and varying types of snow.
LFW 3 (P1) is used for cold and dry conditions. LFW3 has been very successful as a race wax in both cold and dry conditions on new to transformed snow on both natural and artificial snow. LFW3 Nero (P1 Nero) is like LFW 3 (P1), for extremely aggressive, transitioning, cold snow.
Sp7 is a special wax for extremely cold and dry conditions. Use as a race wax in cold conditions, hardening layer for cold race waxes, and for training. (SP7 Polar contains no fluor!) Super hard wax, also suitable for ski jumping. (Sp7 contains no fluorine)
Air temperature: +2°C to -8°C Humidity: all levels Ironing temperature: approx. 120°C
Air temperature: -4°C to -20°C Humidity: all levels Ironing temperature: approx. 140°C
Air temperature: -8°C to -30°C Humidity: all levels Ironing temperature: approx. 150°C
Polar Extreme for all dry new and artificial types of snow. Can also be used as a carburizing powder for the prevention of burning during Alpine skiing
Polar Extreme silver for all dry transitioning types of snow. Can also be used as a carburizing powder for the prevention of burning during Alpine skiing
Polar extreme does not contain fluorine!
Polar extreme silver does not contain fluorine!
Air temperature: -5°C to -30°C Humidity: dry Ironing temperature: approx. 150°C
Air temperature: -5°C to -30°C Humidity: dry Ironing temperature: approx. 150°C
HighFluor WAX hwk skiwax app >> www.hwk-skiwax.com <<
HFW1 has a wide range of applications: coarsegrained snow, artificial snow, marble-like snow, in damp and wet snow. Particularly proven for Alpine runs. Air temperature: +10°C to -2°C Humidity: > 60% Ironing temperature: approx. 90°C
HFW2 is used for transformed and artificial snow types. HFW2 works extremely well in fine and coarse grained, old, or artificial snow.
Air temperature: +2°C to -6°C Humidity: > 60% Ironing temperature: approx. 120°C
HFW3 for new snow, recently transformed, hard artificial snow. Use in snow with mid to high moisture levels and or mid to high air humidity readings.
Air temperature: -4°C to -12°C Humidity: > 60% Ironing temperature: approx. 140°C
HFW nero for dirty, transformed moist to wet snow. Best results in fine and coarse-grained old snow and artificial snow. HFW NERO is also a great base layer for fluorpowders and sticks.
Air temperature: +10°C to -6°C Humidity: > 60% Ironing temperature: approx. 120°C
HighFluor WAX
hwk skiwax app >> www.hwk-skiwax.com <<
ALPIN Racing PRO WARM ALPIN Racing PRO WARM is perfectly suitable for snow conditions between slightly wet snow and very wet snow. With the ALPIN PRO SERIES from HWK, great success has already been celebrated in the World Cup.
ALPIN Racing PRO COLD ALPIN Racing PRO COLD is perfectly suitable for slightly wet snow to dry snow conditions. With the ALPIN PRO SERIES from HWK, great success has already been celebrated in the World Cup.
Air temperature: +15°C to -2°C
Air temperature: +2°C to -20°C
Ironing temperature: 120°C
Ironing temperature: 140°C
NORDIC ULTRA HFW BASE
Due to its extreme abrasion resistance, NORDIC ULTRA HFW BASE is the perfect base wax for every Fluorpowder. The NORDIC ULTRA HFW BASE wax from HWK has been developed especially for ski marathons and long distance racing.
Air temperature: +10°C to -20°C Ironing temperature: 140°C
SpecialFluor-WAX
hwk skiwax app >> www.hwk-skiwax.com <<
Fluorpowder warm Durable, abrasion-resistant fluorine powder for slightly frozen over to wet snow. Very good properties even during snowfall and sleet.
Fluorpowder extreme For all types of snow, independent of temperature. Important! Wet (Doser 30% or higher) or dry snow (Doser 14% or less)
Fluorpowder extreme For all types of old snow, independent of temperature. Important! Wet (Doser 30% or higher) or dry snow (Doser 14% or less)
Air temperature: +15°C to -4°C Humidity: > 70% Ironing temperature: approx. 165°C
Air temperature: independent of temp. Humidity: independent Ironing temperature: approx. 170°C
Air temperature: independent of temp. Humidity: independent Ironing temperature: approx. 170°C
Fluorpowder middle For new snow and finely grained types snow at high humidity.
Fluorpowder middle 2010 Best properties for all transitioning types of snow.
Neuschnee Fluorpowder For snowfall in dry areas and new snow at a humidity of 60% (Doser (measure metre for snow) 14% and higher).
Air temperature: 0°C to -8°C Humidity: > 60% Ironing temperature: approx. 145°C
Air temperature: 0°C to -8°C Humidity: > 60% Ironing temperature: approx. 145°C
Air temperature: -1°C to -20°C Humidity: > 60% Ironing temperature: approx. 145°C
Fluorpowder cold Optimal range for cold and dry new and artificial types of snow. (Fine grained!)
Fluorpowder cold silver Optimal range for cold and dry transitioning types of snow. (Coarse-grained old snow!)
Air temperature: -2°C to -16°C Humidity: > 60% Ironing temperature: approx. 155°C
Air temperature: -2°C to -16°C Humidity: > 60% Ironing temperature: approx. 155°C
Fluid Fluor-WAX
hwk skiwax app >> ww www.hwk-skiwax.com .hwk-skiwax.com <<
LIQ UO WARM For all wet snow conditions. Doser: 3 0% - 100%
LIQ UO MIDDLE For all slightly wet snow conditions. Doser: 15% - 3 0%
LIQ UO COLD For dry snow conditions. Doser: < 17 %
Air temperature: +15°C to 0°C Humidity: 8 0% - 100% Ironing temperature:
Air temperature: 0°C to -10°C Humidity: 50% - 8 0% Ironing temperature:
Air temperature: -5°C to -20°C Humidity: 3 0% - 7 0% Ironing temperature:
HY DRO WARM For all wet snow conditions. Doser: 3 0% - 100%
HY DRO MIDDLE For all slightly wet snow conditions. Doser: 15% - 3 0%
HY DRO COLD For dry snow conditions. Doser: < 17 %
Air temperature: +15°C to 0°C Humidity: 8 0% - 100% Ironing temperature:
Air temperature: 0°C to -10°C Humidity: 50% - 8 0% Ironing temperature:
Air temperature: -5°C to -20°C Humidity: 3 0% - 7 0% Ironing temperature:
FX1 A high fluorine paste for wet and changing snow conditions at high humidity, optimal durability.
K X1 A fluorine paste for various types of snow at an average humidity and in the specified temperature range.
Air temperature: +15°C to -2°C Humidity: > 7 0% Ironing temperature:
Air temperature: -2°C to -8 °C Humidity: 50-7 0% Ironing temperature:
VP TEST WAXES
483
hwk skiwax app >> www.hwk-skiwax.com <<
472
VP 483 for fresh snow falling, fresh snow mixed with rain an all wet snow conditions (fine-grained)
VP 472 1. for wet snow conditions about 0°C snow humidity: 25-40%
Temperature between +6°C to -6°C snow humidtiy: 17% and more
2. dry snow conditions (artifical snow and old snow) snow humidtiy: 15% and less
Ironing temperature: approx. 165°C
Ironing temperature: approx. 175°C
518
VP 518 approx. -3°C to -20°C suitable for fresh fallen snow and fine types of snow snow humidity: approx. 15% to 25% dry to lightly damp
516
VP 516 approx. 1°C to +10°C suitable for corny wet types of snow also treated with salt snow humidity: 22% - 70%
517
VP 517 in range positive suitable for wet types of snow (snow slush, spring snow) snow humidity: 40% to 100% from -4°C and colder suitable for dry, fine snow conditions snow humidity: 22% and less Ironing temperature: approx. 175°C
516.4
VP 516.4 suitable for same conditions like VP 516 at less dirt pick-up
Very good experiences in Oberhof and Ruhpolding! Ironing temperature: approx. 155°C
Ironing temperature: approx. 165°C
Ironing temperature: approx. 165°C
SK I TOURING
WAX - UP LINE hwk skiwax app >> www.hwk-skiwax.com <<
UP ALLROUND is a skinwax for all snow conditions. UP Allround helps against snow sticking of the ski touring skins.
UP WARM is a skinwax for slightly moisture to wet snow conditions. It‘ s also for fresh snow conditions and it‘ s used especially for ski touring races. UP WARM helps against sticking of the ski touring skins and makes the skins significantly faster!
Air temperature: Humidity: Ironing temperature: approx. 8 0 - 9 0°C
Air temperature: Humidity: Ironing temperature: approx. 8 0 - 9 0°C
UP FLUORSTICK WARM is in connection with UP WARM the highspeed solution for every ski touring racer. It works best at slightly moisture to wet snow conditions. It is used as covering layer over UP WARM. Air temperature: Humidity: Ironing temperature: approx. 8 0 - 9 0°C
UP ANTISNOW prevents snow from sticking to the ski’ s surface, thus forcing you to schlepp along extra weight. Y ou can apply UP Antisnow on the ski‘ s and the ski touring shoe‘ s surface. So snow doesn‘ t remain on the surface. Unnecessary additional weight will be saved. Air temperature: Humidity: Ironing temperature:
Waxing like a pro! Find all videos on www.hwk-skiwax.com!
www.hwk-skiwax.com