With a state-of-the-art, customised and purposebuilt laboratory, a bright refreshing seminar room for presentations and lectures, including a relaxing break-out dining area, Skillbond offer you an environment which will enrich your experience whilst you earn valuable verifiable CPD hours!
We offer a varied yet comprehensive programme of courses for Prosthetics, Crown & Bridge and the Digital environment, inviting world-renowned
presenters and demonstrators from suppliers of the leading product brands, as well as our own accredited training staff.
As an International Centre offering “Excellence Through Training”, Skillbond welcomes all technicians from the UK, Europe and extending worldwide, to attend its popular certified courses ranging from 1-day introductory to 2-day advanced courses.
*NB. THIS BROCHURE IS FOR PREVIEW PURPOSES AND DOES NOT INCLUDE ALL
PLEASE EMAIL courses@skillbond.com OR CALL
Skillbond Webinars
Lola Welch
Daniele Rondoni
Digital Training/ Support Team
ACCREDITED 3SHAPE AND EXOCAD TRAINERS
OUR DIGITAL TEAM ARE ACCREDITED 3SHAPE AND EXOCAD TRAINERS.
We offer install training with purchase/rental of all 3Shape scanners to set you off on the right foot for your journey into the scanned, designed and printed workflow. We also offer different Levels of 3Shape training as well as bespoke training for your lab’s specific requirements.
We offer similar training to the above for GC Aadva scanners with exocad Ultimate software covering many modules such as Bar, Model Creator, Splint, RPD, Denture, Smile Creator etc.
accredited trainers
SCANNER INSTALL TRAINING PURCHASE/RENTAL
3SHAPE OR EXOCAD
The main objective of this Crown & Bridge installation course is to guide you through the first steps of designing and scanning in either 3Shape or exocad software (depending on the scanner you purchase/rent).
During this digital course every opportunity will be given to the delegate to discuss their digital requirements and expectations.
COURSE DETAILS: Registration is at 8.45am, the course will commence promptly at 9.00am and finish at 5.00pm. This course is free with scanner purchase/rental (max 2 delegates per lab).
Skillbond can offer you a day (or more) of bespoke training at your lab, either oneto-one or for your entire team. As well as eliminating travel, you can learn how to use your own equipment in your lab’s natural environment and set up!
BESPOKE TRAINING IN-HOUSE AT YOUR LAB MONTHLY WEBINARS
3SHAPE SOFTWARE AND SCANNER COURSES
3SHAPE BASIC CROWN & BRIDGE DESIGN
3SHAPE ADVANCED ABUTMENT & BAR DESIGN
The main objective of this basic course is to guide the delegate through the first steps of scanning and designing in 3Shape software. The delegate will spend the day using the software to design a range of basic crown and bridge products to a competent level.
DETAILS:
is at 8.45am, the course will commence promptly at 9.00am and finish at 5.00pm. Price
7
The delegate will have the opportunity to design Implant abutments & basic bars, gain the technical knowledge and expertise offered by this course. From a practical hands on experience and theoretical demonstration offered by a 3Shape expert. This will allow the delegate to apply the processes within their own laboratory.
Must have completed Basic Level Courses
is at 8.45am, the course will commence promptly at 9.00am and finish at 5.00pm.
7
3SHAPE REMOVABLES COURSES
1. ADVANCED RPD DESIGN
2. ADVANCED DENTURE DESIGN
The main objective of these advanced courses will be to guide the delegate through the intermediate steps of scanning and designing in 3Shape software. The delegate will spend the day using the software to design a range of intermediate products to a competent level. (Must have completed basic course or be confident in designing the above).
Must have completed Basic Level Courses
7
3SHAPE SMILE DESIGN COURSE
During this one day course, you will receive handson software training covering Smile Design and Real View application based on Dental System software. Not only will this course improve the methodology you use when designing restorations but it will also open a new service opportunity within your laboratory.
Must have minimum 6 months design experience and be competent with the Advanced Level Courses.
COURSE DETAILS:
is at 8.45am, the course will commence promptly at 9.00am and finish at 5.00pm.
7
EXOCAD BASIC CROWN & BRIDGE DESIGN
The main objective of this Level 1 course is to guide the delegate through the first steps of designing in exocad software. The delegate will spend the day using the software to design a range of basic crown and bridge products to a competent level.
The main objective of these advanced courses will be to guide the delegate through the intermediate steps of scanning and designing in exocad software. The delegate will spend the day using the software to design a range of intermediate products to a competent level. (Must have completed basic course or be confident in designing the above).
Must have completed Basic Level Courses
SOFTWARE AND SCANNER COURSES
EXOCAD ADVANCED ABUTMENT & BAR
The main objective of the course is to give the delegate a better understanding of the basic implant and abutment module. Delegates will spend the day designing custom abutments & basic bars to a competent level.
EXOCAD SMILE DESIGN COURSE
During this one day course, you will receive handson software training covering Smile Design and Real View application based on exocad software. Not only will this course improve the methodology you use when designing restorations but it will also open a new service opportunity within your laboratory.
Must have minimum 6 months design experience and be competent with the Advanced Level Courses.
ARGENZ: FULL CONTOUR DESIGN, STAIN AND GLAZE
DESCRIPTION
The delegate will spend the morning understanding the ranges of ArgenZ zirconia. Using 3Shape software they will design 2 full contour crowns to a competent level and learn how to ‘mirror’ teeth.
The afternoon will then be spent staining, glazing and finishing the crowns using the latest paste and stain materials and gaining an understanding of how to process sintered zirconia.
CONTENT
• Full Contour design including ‘mirroring’ using 3Shape software
• Sintered zirconia preparation
• Tips and tricks for trimming and finishing sintered zirconia
• Stain, glaze and polishing full contour crowns
PRINTED DENTURES: LUCITONE DIGITAL PRINT SYSTEM
DESCRIPTION
The main objective of this course is to guide the delegate through the process of designing, nesting, printing and finishing a full denture and teeth using the Lucitone Digital Print workflow and their materials utilizing the validated Asiga Printers. The morning will be spent in overview of the relevant materials and design parameters required to produce the best digital denture available. The afternoon will then be spent printing and finishing.
CONTENT
• Lucitone Print Materials Overview
• Design Full Denture and Teeth
• Live Demo
Workflows and System
• Copy Denture and Partial Denture
• HC Libraries
• Polish and Finish Dentures
FEATURES
• Low labor
• High-capacity printing
• Materials for economy & premium tiers
• Exceeds ISO improved impact resistance requirements (denture base)
• No mixing - pour and print
• Unused material recovery – low waste
• No glycerol or preheating
• 3-year shelf life
Presented by Davide Accetto, founder & Director of Nifty Dental Solutions Laboratory, a new cuttingedge generation of dental laboratories based in Oxfordshire, focused on 3D printing and CAD design.
• Total material system for efficiency & reliability
• Ability to use technicians of varying skill levels to leverage greater throughput
• Less hands-on labor than traditional process
• Premium with repeatable results ADVANTAGES
DAVIDE ACCETTO
email courses@skillbond.com
PRINTED
DENTURES: CUSTOMISATION WITH SR NEXCO AND AKZENT LC
DESCRIPTION
Presented by key opinion leader Lola Welch who champions aesthetic and technical excellence.
Digital dentures, printed or milled - this course demonstrates how to characterise a denture, using Ivoclar SR Nexco composite, and make it look fantastic!
• Gain an insight into the benefits and possibilities of digital dentures
• Learn the correct protocol for denture preparation prior to composite application
• Understand the best way to handle LC composite for best results
• Gain an understanding of gingival anatomy
• Learn the correct finishing techniques for gum composite
Delegates will gain an understanding of how to customise a printed denture using LC composite.
Producing an aesthetic and natural appearance using simple techniques that can be used on a daily basis in the laboratory.
DESCRIPTION
AESTHETIC WHITE & PINK A DISTINCTIVE APPROACH USING KATANA ZIRCONIA
Presented by renowned International Kuraray Noritake Instructor Daniele Rondoni.
A 2-day course to learn the correct protocol for handling multiple unit zirconia with gingiva. Providing a predictable aesthetic outcome, using Kuraray Noritake Katana HTML and YML zirconia, CZR porcelains and FC Paste Stains.
For a perfect final result of both shade and texture, it is paramount to have a logical system in place. A criteria for zirconia selection, a specific manual finishing technique, pre and post sintering and a precise and well determined sintering process, provides the best aesthetic and mechanical potential of your zirconia.
Finishing with a repeatable technique of MicroLayering, giving predictable aesthetic results every time.
LOLA WELCH DTG
DANIELE RONDONI
HOW TO FIND US:
8 The Valley Centre
Gordon Road
High Wycombe
Bucks HP13 6EQ
ACCOMMODATION
Hotels close to Skillbond International Education Centre listed below: