April2flyer

PLITTPUK8PG - APRIL 2016

limited edition black chrome finish!

t Free T-shir se*! with every purcha

*Free t-shirt offer is restricted to purchases of products within this flyer.

Offer is only available whilst stocks last.

WHY IS APPLYING PROPER TORQUE

WHERE TORQUE REALLY MATTERS...

IMPORTANT?

Applying accurate torque is critical to assembly applications, engines and precision equipment. Creating a proper clamp load is the main objective when applying torque to a fastener. Engine cylinder heads, pipe coupling, wheels, all need to be “clamped” uniformly to specific torque values. There are 3 main factors that affect the correct application of torque: condition of components, accuracy of torque instrument and properly applied torque values.

Applying torque incorrectly can lead to stripped threads, premature loosening or broken fasteners, that can cause catastrophic failure, whilst leaking joints may cause engine or equipment failures.

AUTOMATIC TRANSMISSION

BODY EQUIPMENT

FRONT AND REAR AXLES

PROP SHAFT EXHAUST SYSTEM

CAMSHAFT BEARING STRIP

OIL PAN

BRAKES

CYLINDER HEAD BOLT

TORQUE CONVERTER

REAR WHEEL NUT DIFFERENTIAL COVER

NE

W!

Check out the great features of the TechAngle Torque Wrench!

Sealed Ratchet Head

Flex-Head Ratchet Design Provides effortless torque transfer and added accessibility in tight areas

Keeps contamination out and lubrication in for better performance and longer tool life

LTD EDITION BLACK CHROME FINISH WITH RED, GREEN OR ORANGE HANDLES!

Four Torque Alerts

Confirm proper torque angle via LCD display, Dual Progressive LEDs, audio alert and vibration

Protected End Cap

Solid threaded brass internal end cap for secure fit. Resists impact; won’t loosen or lose continuity

Large Backlit LCD Display

Makes viewing easier in tight quarters and at odd angles

Temperature & Chemical Resistant Grip keeps hand centred on handle regardless of conditions for enhanced safety and proper torque technique

SCAN ME TO SEE A PRODUCT VIDEO

Comfort Grip

100% Steel Body Construction Dual 80ÂŽ Technology

Provides superior torque with minimal swing arc

Built for durability, tested for strength

Bright, Dual Progressive LEDs

Provide wider range of sight for better visibility in compromised positions

Fully Programmable

Quickly change units of measure appropriate for specific application

Over-molded non-slip handle with flared end provides secure grip, even in high-leverage applications

Patent-Pending, Impact-Resistant Housing Protects internal electronics from drops, collisions and other shop-specific hazards

SEE NEXT PAGE FOR MORE INFORMATION!

W!

NE

TECHANGLE

TORQUE WRENCHES

LTD EDITION BLACK CHROME FINISH WITH RED,,GREEN OR ORANGE HANDLES!

available in 3/8" and 1/2" Drives 3/8" TechAngle Torque Wrench Was £376.80 Excl. VAT

£299.99 ATECH2F100VG/O/R

1/2" TechAngle Torque Wrench Was £419.55 Excl. VAT

Excl.

VAT

£349.99

Excl.

VAT

ATECH3F250VG/O/R

Free T-shirt with every purchase*! *Free t-shirt offer is restricted to purchases of products within this flyer. Offer is only available whilst stocks last.

WHY DO I NEED A TECHANGLE?

1

Tighten with torque AND angle

Some applications require fasteners to be tightened to a specific torque and then turning a specific number of degrees (angle) – for example, some Renault Diesel engine timing belts require the lower pulley to be tightened to 30Nm with a further turn of 140 degrees.

TechAngle gives you accuracy and confidence!

2

Save time and...money

An example of where you can save valuable time is cylinder head replacements. On a Mercedes Sprinter 4 cylinder engine, the cylinder head bolts are tightened in 3 stages: • Stage 1 – Tighten to 60Nm of torque from Bolt 1 • Stage 2 – Add further turn of 90 degrees from Bolt 1 • Stage 3 – Add a further turn of 90 degrees from Bolt 1 Compared to a conventional ‘click and dial’ gauge you can save approx. 30-40 mins by using a TechAngle!

3

Fitting of key components such as Knock Sensors

Some sensors feature internal piezo crystal membranes. A given sensor may need to be fitted at a torque of 18Nm. At 21Nm, the crystal membrane will break, resulting in a broken part. Don’t risk breaking parts – use a TechAngle!

FOR THE TRAD 3/8" Torque Wrench 20-100 Nm Was £217.35 Excl. VAT

£140.99

Excl.

Minimal friction

Retains and releases for more accurate and

VAT

QD2RN100A

roll-marked

For clarity and du

NEW AND IMPROVED!

1/2" Torque Wrench 70-350 Nm Was £249.70 Excl. VAT

£155.99

Excl.

VAT

Sealed ratchet head

QD3RN350A

Keeps out dirt and moisture for lo

ALWAYS ROOM FO

BUY THIS 12-PC 3/8" Deep Socket Set 212SFSMY • Contains sizes 8 – 19mm • Made of special alloy steel that is heat treated for strength and durability • Nickel chrome finish protects against corrosion • Thinner wall design gives greater access

GET THESE FREE!

3/8" Ratchet & 3/8˝ Long Ratchet F80 & FL80 • Sealed heads keep out dirt and other contaminants • Manufactured from special alloy steel for strength and durability • Chrome finish prevents rust and allows for easy clean up • FL80 has long handle for greater reach and leverage

Free T-shirt *Free t-shirt offer is restricted to purchases of products within this flyer.

DITIONALISTS

n “Hour Glass” cam

s lubricant to reduce friction d repeatable torque values

scales

urability

Positive stop function Cannot be accidentally disassembled if wound down past scale

Calibrated and repairable Factory calibrated and supplied with calibration certificate.

Can be repaired and recalibrated to ensure continued accuracy

Now with Dual 80® head - provides minimal swing arc, ideal in tight spaces and greater turning strength!

scale in increments of 2Nm (1/2") & 0.5Nm (3/8") Fine level of torque adjustment

Aluminium Knurled handle

ong ratchet life

Secure grip

OR ANOTHER DEAL!

Socket drives fasteners on the flats, therefore providing 15-20% more turning power and less chance of rounding

Was £328.85 Excl. VAT

£164.99 212SFSMY280

- UP TO 80 TOOTH GEAR FOR SMOOTH RATCHETING - 4.5° ratcheting arc great for tight spaces

4.5º

- DUAL PAWLS MEAN 7 TEETH IN CONTACT WITH THE GEAR FOR STRENGTH & DURABILITY

with every purchase*!

Offer is only available whilst stocks last.

Excl.

VAT

TECHANGLE TORQUE WRENCHES THE CHOICE OF PROFESSIONALS!

The cutting edge features of the TechAngle Torque Wrench have made it the choice of a number of the professional motorsport teams that Snap-on works in partnership with, including MBO Power (Motocross), M-Sport (World Rally) and Japspeed (Drifting).

Here’s what MBO Power Team Manager Jon Giffard says about the TechAngle: “The best Snap-on tool I have is hard to name as I have a number of great ones, but one of my favourites that I use heavily when building our race engine is the TechAngle Torque Wrench. It’s precise, so easy to use and never lets me down.”

WIN 1 OF 15 MBO POWER T-SHIRT AND CAP PACKS!*

To be in with a chance of winning: 1. Answer this simple question:

What is the name of the MBO Power Team Manager? a: JOHN B: JOHN C: JON SMITH WAYNE GIFFARD

2. Text the word MBO, followed by the correct answer: A, B or C (e.g. MBO A) to 07786 201770

3. We will let you know if you’re a winner!

Closing Date: Friday 6th May 2016

*Terms and Conditions: Texts cost one standard network rate text. One entry per person. Entrants must have bill payers permission. Competition closes on Friday 6th May 2016 at 11:59pm. Entries made after this time will not be accepted but may still be charged. Winners will be contacted by telephone.

By entering this competition, you consent to your contact details being used for further marketing activities by Snap-on and associated companies. Your details will not be passed on to any third parties.

Colour of cap and t-shirt may vary from that shown.

Winners will be notified within 30 days after the closing date.

All prices exclude VAT at 20%. Items are available from participating Snap-on Franchisees for a limited time while stocks last. Price, availability and specifications may change without notice. Actual colour may not be accurate due to print process. Errors and omissions excepted. Snap-on® and Blue-Point® are registered trademarks of Snap-on Inc. Other trademarks are the property of their respective registered proprietors. © Snap-on UK Holdings Ltd 2016