PLITUK10PG-2 JUNE 2016
TOOLS THAT M
WHY CHOOSE SNAP-ON Ratchets? DUAL 80® TECHNOLOGY *: • UP TO 80 TOOTH GEAR FOR SMOOTH RATCHETING • DOWN TO 4.5° RATCHETING ARC - GREAT FOR TIGHT SPACES • DUAL PAWLS MEAN UP TO 7 TEETH IN CONTACT WITH THE GEAR FOR STRENGTH & DURABILITY
SEALED HEAD Keeps dirt and other contaminants out of head mechanism.
STRONG & LONG LASTING CHROME FINISH Chrome finish prevents rust and allows for easy clean-up. Manufactured from special alloy steel for strength and durability. *1/4" ratchets feature 72 tooth gear, 5° ratcheting arc and 6 teeth in contact with gear
1/4" Locking Flex Head Ratchet • Flex head design gives exceptional versatility and offers nine locking positions for convenient access to work areas
Was £78.35 Excl. VAT
£48.35
• Lock button positioned on handle for easy one-hand operation
Excl.
VAT
TX72
PROBLEM: GREASY HANDS
Solution: Our quick release mechanism has a positive locking feature to hold the socket securely in place and with the push of a button releases the socket, helping you get the job done quicker.
1/4" Extra Long Quick Release 9" Ratchet • Longer handle gives greater reach and increased leverage
ASK ME FOR A TRADE
9" LONG
Was £75.05 Excl. VAT
£65.05 TRLL72-10
JUNE 2016
Excl.
VAT
AKE LIFE EASY BUY THIS 12-PC 1/4" Low Profile Ratchet & Socket Set • 72 tooth gear with 5° incremental change - minimal movement required in tight areas • 11mm hex on sockets - can be used with any 11mm ratchet wrench for even greater accessibility
Was £135.25 Excl. VAT
• Use with magnetic bit holder supplied (RTMBS8) to hold any 1/4" shank bit to turn into driver
112RTSM
£99.99
GET THIS FREE
i
Excl.
VAT
IDEAL WHERE SPACE IS LIMITED! COMPARE THE DIFFERENCE WITH OUR COMPETITORS
6-PC 1/4" Inverted Torx® Socket Set 106RTLE
• Includes sizes E4 to E10 • Sockets can be used with 1/4" extensions or any 1/4" ratchet and 11mm ratcheting wrench • Socket moulded to 11mm hex • Bolt clearance through hole • Manufactured from special alloy steel, precision forged and heat treated for optimum strength and durability
i
Normal Price
FLANK DRIVE
®
£59.55 Excl. VAT
Wrench drives fasteners on the flats, therefore providing 15-20% more turning power and less chance of rounding.
7-PC Short Flank Drive® Ratcheting Wrench Set • Contains sizes 8-14mm • Tough, durable nickel chrome finish - looks good, cleans up easily & resists corrosion • Hardened & constructed from high quality steel - provides a better fit & long lasting • Up to 80 gear teeth with less than 5° of tooth engagement - less movement required to engage next tooth, ideal in tight quarters
Was £149.20 Excl. VAT
£119.99 OXIRM707
Excl.
VAT
GREAT WHEN SPACE IS LIMITED!
COMPLETE YOUR SET WITH SIZES 15-19MM - SPECIAL ORDER NOW! OXIRM705
www.snapon.com/uk
GREAT DEALS ON 1/2" 18V Lithium Cordless Hammer Drill Kit • 22 position clutch • 3 stage gear box - hammer, drill & driver • Temperature protection and shut down protects the tool from excessive heat damage • Soft start trigger ensures smooth tool start up • Heavy duty gearing designed for metal drilling • Screened motor keeps debris out • Overmolded ergonomic cushion grip absorbs vibration and reduces user fatigue • Includes charger, 2 batteries and a tote bag
i
BUILT-IN LED LIGHT
SPECIFICATION Torque (ft lbs) Free Speed (RPM)
Up to
450
1,800
Only
£408.00
3 STAGE GEAR BOX
Excl.
VAT
CDREU8850H
ALREADY GOT THE BATTERY? Ask me for details about the body! 1/2" 18V Lithium Cordless Hammer Drill (Body Only)
CDREU8850HDB
15-PC HSS Metric Drill Bit Set • Heavy duty construction made from M2 grade steel
15-PC Cobalt Metric Drill Bit Set
• For use on most materials Was £91.75 Excl. VAT
£71.75
Excl.
VAT
DBTBM115
• Heavy duty construction made from M35 grade cobalt steel • For use on stainless steel and other high tensile steel materials Was £122.35 Excl. VAT
£92.35
Excl.
VAT
DBTBMC115
i
SNAP-ON THUNDERBIT® DRILLS 56.8% OF DRILL DIAMETER
24% OF DRILL DIAMETER
• The inner flute form that allows for better chip ejection, reduces woodpeckering and improves coolant flow to the drill point • 135° split point means easier drill start without the need for centre punching
DRILLING KITS 3/8" 14.4V Micro Lithium Cordless Drill • 9 position clutch – delivers a range of torques from 8 to 50 in.lbs • Variable speed switch • Small size to get into tight areas • Cushion grip • Battery fuel gauge • Includes x 1 Lithium 14.4V battery
i
SPECIFICATION 150 in.lbs
Torque (ft lbs)
Was £290.00 Excl. VAT
£235.00
Excl.
VAT
CDREU761UK
400 / 1,400
Free Speed (RPM) Drill & Battery Weight
Only 2.4 lbs
DON’T FORGET YOUR CUTTING OIL!
REDUCES HEAT BUILD UP AND KEEPS YOUR BITS SHARP ONLY £7.35 Excl. VAT CL6
CHARGER...
!
1 2 3
1 - 2 - 3...
W NE
CHARGING BATTERIES IS AS EASY AS
i
BATTERY TYPES 14.4V & 18V...
SCAN FOR MORE INFORMATION!
BATTERIES CAN BE CHARGED AT SAME TIME! 14.4V & 18V Multibay Battery Charger* • Charges 3 lithium batteries simultaneously • Mix and match 14.4V & 18V lithium batteries at the same time • High current 5.8 Amp charging • 1 Amp USB charger • Charges batteries in 60 minutes
• • • • •
Low profile design High flow fan to keep unit cool Fuel gauge indicator Advanced battery pack protection Wall mountable
Was £284.60 Excl. VAT
£199.99 *Batteries not included
CTCEU123
Excl.
VAT
HEAD TURNING DEALS!
12-PC Metric Ratcheting Combination Wrench Set • Includes sizes 8 – 19mm
10-PC Flank Drive® Plus 12pt Combination Wrench Set • Includes sizes 10-19mm
£124.35
Excl.
VAT
BOERM712
Was £290.20 Excl. VAT
£214.99
Was £164.35 Excl. VAT
Excl.
VAT
SOEXM710-40
BOTH OF THESE SETS FEATURE: FLANK DRIVE PLUS ®
The series of flutes and notches exceed the performance of any other open end design and provide up to 62% more turning power and strength
• 15° offset box head for knuckle clearance • Tough, durable nickel-chrome finish • 4.5° (5° on smaller wrenches) gear engagement – less movement to engage next gear • Dual pawl ratcheting box end for smooth operation and maximum strength
COMPLETE YOUR SET WITH BIGGER SIZES! 5-PC Flank Drive® Plus 12pt Combination Wrench Set
4-PC Metric Ratcheting Combination Wrench Set
• Includes sizes 20-24mm
• Includes sizes 21, 22, 24 and 25mm
Was £305.95 Excl. VAT
£179.00 SOEXM705-40
JUNE 2016
Was £122.80 Excl. VAT Excl.
VAT
£92.80 BOERM704
Excl.
VAT
AKE LIFE TOUGH EASY TOOLS FOR TOUGH JOBS! 3/4" Drive 36" Long Handle L872RM
METRIC
STUBBY HEAD FOR BETTER ACCESS WHERE SPACE IS LIMITED
CAN TAKE 710 FT LBS OF TORQUE!
6" 3/4" Drive Sealed Ratchet Head
TORX®
L872
11"
AWMBS9
BREAKING BAD GOOD!
BUY ALL 3 FOR ONLY
36"
£230.00
METRIC
Excl. VAT
i
Applications include: • 4 X 4’s • Agricultural • Trucks • Trailers
3" AWTPH8
AWMBPH9
Hex Key Sets
3-PC Locking Wobble Extension Set
• Patented screw holding tip holds fastener for delicate installations (AWMBPH9 & AWMBS9)
• Includes 3", 6" and 11" long extensions
• Made from Protanium, the strongest hex tool steel available • Long arm for extra leverage
L8112A
• Quick release locking sleeve provides secure connection and easy socket removal
• Metric hex sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
• Knurled release collar for easy one-hand operation
• Torx® sizes T9, T10, T15, T20, T25, T27, T30, T40
• Includes storage tray
Was £26.34 Excl. VAT
Breaker Bar Head
• Provides 16° of additional accessibility
£22.00 AWPACKUK
Excl.
VAT
Was £92.20 Excl. VAT
£62.20
Excl.
VAT
203FXWKL
www.snapon.com/uk
S E V A S G N I T S E T T C E CORR MONEY…AGAIN! TIME AND A 2005 Fiat Multipla with a 1.9 litre turbocharged compression ignition engine had the malfunction indicator lamp on and the vehicle was running on a limited operating strategy, often referred to as limp mode. Further investigation found a fault code stored in the ECM module: P0235 Turbocharger boost pressure malfunction. The cost of a replacement turbocharger is clearly very expensive so a diagnostic check was carried out to ensure this was correct. Once the device was connected to the vehicle (Verus, Verdict, Modis or Vantage) the following data parameters were analysed: • • • •
Key on, engine off with fault present Barometric pressure (mBar) - 1013 Required turbocharger boost pressure (mBar) - 1056 Actual turbocharger boost pressure (mBar) - 1179
The turbocharger boost pressure is reporting a pressure greater than atmospheric pressure with the engine switched off. This is incorrect. The engine control module runs a comparison between the barometric pressure and the boost pressure under certain conditions and if there is a correlation fault then a fault code will be logged. The perfect condition for this is ignition key switched on and the engine switched off. After analysing the data I used a vacuum puller (YA4000B or similar) to reduce the voltage generated by the turbocharger boost pressure sensor. By observing the serial data, I got the boost pressure sensor voltage to a point where the engine control module would allow the fault code to be cleared. The image below shows the reduction in voltage required. The voltage was reduced from 2.2 Volts to 1.9 Volts.
The information below shows the serial data with a slight depression when vacuum is applied to the sensor: • • • •
Key on, engine off with fault present Barometric pressure (mBar) - 1013 Required turbocharger boost pressure (mBar) - 1029 Actual turbocharger boost pressure (mBar) - 1136
A new turbocharger boost pressure sensor was fitted and the vehicle returned to normal operation with no fault codes stored. The sensor was approximately one tenth the cost of a new turbocharger!
t a e l c i t r a l l u f e h 6 t 1 5 d 0 h c Rea e T / m o c . l r u y http://tin
NEW ESSENTIAL TOOLS!
NEW
14.4V Lithium Cordless Polish/Prep Tool Kit • Compact and lightweight
• 2.0 Ah battery pack
• 2 speed gearbox – 3,500/15,000 RPM
• Battery capacity fuel gauge • Includes various polishing & sanding pads
• Variable speed trigger
INCLUDES:
£298.00
Body with 1 Battery
WE ALSO OFFER THESE OPTIONS...
£213.00
• 3,100 strokes per minute
• Integrated LED worklight
• Variable speed switch
• LED battery gauge
• Dual quick chuck mechanism
• Screened motor keeps debris out
• Depth guide that can be adjusted without use of tools
Only
£348.00
Automotive: • Exhaust Manifolds • Transfer Cases • Brake Rotors • Front Differentials • Various Under-carriage Applications
Body Shops: • Spot Sanding • Quarter Panels • Metal • Solid Surfaces • Wood • Fibreglass
CTPP761DB-30
NEW
i
APPLICATIONS INCLUDE WORK ON: • • • • • • • • • •
INCLUDES:
Excl. VAT
CTRSEU761-65
CTPPEU761-55
£157.00 Excl. VAT
CTPP761WB-40
14.4V Lithium Cordless Reciprocating Saw Kit
Excl. VAT
Body Only
Excl. VAT
APPLICATIONS INCLUDE:
Detailing Shops: • Headlight Restoration • Alloy Wheels • Side View Mirrors • Door Handles • Valve Covers • Motorcycle Engines & Wheels
Only
2 BATTERIES, 1 CHARGER AND A KIT BAG
ALREADY GOT THE BATTERY & CHARGER?
i
2 BATTERIES, 1 CHARGER AND A KIT BAG
Exhaust Pipes Hoses Sunroofs Sheet Metal Door Panels Quarter Panels Fibreglass Plastic Bumpers Wood Tubing
ALREADY GOT THE BATTERY & CHARGER? Body with 1 Battery
WE ALSO OFFER THESE OPTIONS...
£274.00
Excl. VAT
CTRS761WB-55
Body Only
£211.00 Excl. VAT
CTRS761DB-40
DON’T FORGET TO CHARGE THESE TOOLS WITH
THE NEW 14.4V & 18V MULTIBAY CHARGER!
Ask me for more details!
PLUS... ASK ABOUT OUR NEW RANGE OF
POLISHING, WAXING & RESTORATION PRODUCTS COMING IN JULY!
PART NO.
DESCRIPTION
PRICE EXCL.VAT
KACKMCFIBER4
Pack of 4 Microfibre Cloths
£13.70
KACKSPDWAXX
16oz Speed Wax
£13.70
PACKBB2L4
2" Buffball with 4" Shaft
£19.75
PACKBB3L1
3" Buffball with 1" Shaft
£18.30
PACKPLSHKIT
Polishing and Restoration Kit
£51.25
PACKSD31000
Pack of 3 Abrasive Pads 1000gr
£5.85
PACKSD32000
Pack of 3 Abrasive Pads 2000gr
£5.85
OBD DIRECT OEM coverage for 30+ vehicle makes
COMPONENT TEST METER fast-track guided component tests for 19 European makes
SCOPE MULTIMETER high speed 4-channel lab/ignition scope and digital/graphing meter
SCANNER retrieve and work through diagnostic fault codes
INFORMATION Autodata diagnostics information embedded
VEHICLE HISTORY
SYSTEM SETTINGS
auto completed job cards
manage wireless connections and set up job card header
HELP access to electronic user manual
DATA MANAGER save vehicle records, scanner and scope data
Actual parts replacement data is gathered from successful repairs from over 2,500 workshops across the country
Each month 400,000 job cards are analysed and verified by SureTrack® engineers and uploaded daily – data updates on diagnostic tool via Wi-Fi
Information is presented in easy to read graphs and structured text that shows: Complaint > Cause > Correction - the 3 C’s!
*SureTrack® is a live system that is only available with the latest software and internet access. Software must be kept up to date with the latest releases to keep SureTrack® active.
All prices exclude VAT at 20%. Items are available from participating Snap-on Franchisees for a limited time while stocks last. Price, availability and specifications may change without notice. Actual colour may not be accurate due to print process. Errors and omissions excepted. Snap-on® and Blue-Point® are registered trademarks of Snap-on Inc. Other trademarks are the property of their respective registered proprietors. © Snap-on UK Holdings Ltd 2016