Wk51flyr

*Offer applies only to pliers featured in this flyer. The PLR300 3 piece sets qualify as 3 pairs. The ‘big pliers’ are for display purposes only. Only scratchcards with the correct answer can win the prize draw. Offer is available whilst stocks last. Snap-on reserves the right to amend the details of or withdraw this competition at any time. No purchase necessary.

PLITPLPKUK - JANUARY 2016

GET A GRIP WITH OUR Vector Edge 7" Diagonal Cutter

scan !

• Parallel cutting edges give a clean cut anywhere along the blade

me

• Multi-purpose – use on copper wire, plastics, spring steel and more • Induction hardened for extreme strength and durability

Only £32.70 each Excl. VAT

AVAILABLE IN RED, GREEN & ORANGE

87ACF/G/O-10

ASK ME FOR A DEMO!

EFFORTLESSLY CUTS A WIDE RANGE OF MATERIALS!

TAKE A CLOSER LOOK AT THE MOBEA HOSE CLAMP GROOVE 7" Wire Stripper/Crimper/Cutter • For use on 14–24 AWG wire • Strong serrated gripping nose for bending, pulling and shaping • Crimps insulated and bare wire connectors

• Wire cutter in two places; in jaw and near the handle • Wire crimper placed in front of the pivot point for crimping in tight places • Cold forged for longer life

£32.40 Excl. VAT PWCSS7CF-5

Combo Hose Clamp Pliers • 3 position joint gives wider jaw spread • For 3/4"-2" diameter clamps • Radial jaw serrations allow user to grip and adjust hose

£25.45 Excl. VAT HCP48ACF-5

WHY NOT TRADE-IN YOUR OLD PLIERS?

OUR QUALITY PLIERS!

D, E

Long Nose 4-in-1 Cutter Pliers

Cushion-grip handle resists automotive fluids and provides comfort

Strong alloy steel keeps jaws sharper longer

£37.30 Excl. VAT

Talon Grip™ diamond-serrated tip for gripping and twisting

196ANCF-5

Ramped tip improves accessibility

NEW JOINT LOCATION GIVES MORE LEVERAGE! 1) Needle nose end – for hard to reach areas, twisting and pulling

2) Pin pulling jaw – e.g. split pin pulling

3) Larger jaw for gripping and turning fasteners

Longer contoured handle with new joint location provides higher leverage and increased comfort

4) Wiring cutter

6" Needle Nose Pliers • Diamond serrated jaws for improved grip • Rounded jaw edges minimise nicks to wires when making loops and bends • Cushion grip handles • Cold forged for longer life

£34.00 Excl. VAT 95CF-5

AVAILABLE IN RE RED, GREEN & ORANGE 3-PC Plier Set 11" Long Nose Pliers • Jaw tips feature machined rather than stamped teeth for precision gripping with positive control • Long, slim jaws and flush riveted joints for increased reach in recessed areas • Ideal for electronic work, holding pins or small components

£43.65 Excl. VAT 911ACF-5

• Includes Lineman’s Pliers (57AHLP), High Leverage Diagonal Cutters (86CF) and Needle Nose Pliers (97CF) • Lineman’s pliers feature induction hardened jaw for extra strength and gripper teeth for a useful crushing area • Diagonal cutters are heat treated to handle repeated tough cutting jobs • Needle nose pliers feature machined teeth for precise and strong gripping

£107.45 Excl. VAT PLR300/G/O-20

WIN A BIG SET OF PLIERS!

WHEN YOU BUY ANY 3 PAIRS OF PLIERS FROM THIS FLYER See front c o ver for more

det ail S!

14.4V MICRO LITHIUM POWERFUL AND COMPACT! 3/8" 14.4V Micro Lithium Impact Wrench • 2.0AH battery for longer run time • Variable speed digital toggle style trigger • Built-in brake stops throwing of sockets and fasteners • 3 super bright LEDs for more visibility • Includes charger, x2 batteries and tote bag Was £390.00 Excl. VAT

£249.99 Excl. VAT CTEU761/G/O

AVAILABLE IN RED, GREEN & ORANGE

i

SPECIFICATION Torque Output

Up to 120 ft lbs

Blows Per Minute (BPM) Free Speed (RPM)

3,000 2,200

14.4V Micro Lithium Cordless Screwdriver • Digital variable-speed trigger for precise control

Already got the 14.4V Battery?

Get the Body for just £164.99 Excl. VAT!

CT761DB/GDB/ODB

i

SPECIFICATION

• Twin-beam LED headlights illuminate the work area

Free Speed (RPM)

150 in.lbs 400/1,400

• Built-in brake stops the tool from throwing sockets and fasteners

Screwdriver & Battery Weight

only 2.0 lbs

Torque Output

• 9 position clutch - delivers a range of torque settings

A

A a it

F B

Q

• Screened motor keeps debris out • Battery fuel gauge • Twin speed gearbox - 400/1400 RPM • Includes x 2 batteries, bag and charger

Was £337.50 Excl. VAT

£249.99 Excl. VAT CTSEU761

JANUARY 2016

CTS761DB

Already got the 14.4V Battery?

Get the Body for just £139.99 Excl. VAT! Snap

SAVE TIME WITH THE...

PID (PARAMETER IDENTIFICATION) TRIGGER FUNCTION A very handy feature of Snap-on’s diagnostic software is the parameter identification (PID) trigger function.

This function helps you to keep track of the data produced by the vehicle while you’re carrying out your diagnosis, meaning you don’t need to keep watching your scan tool’s screen or have someone else helping you out.

You can set minimum and maximum values and if your data goes outside of these, the PID trigger function will automatically save it for you to refer back to.

For example, let’s work with a vehicle’s intake air temperature sensor: You select the trigger icon, then press ‘Set Trigger’.

Then you use the ‘+’ and ‘–’ buttons to set the trigger levels to the minimum and maximum levels that you need.

Let’s keep the minimum as 0 volts and enter 4.5 volts as the maximum.

If you disconnect the sensor from the vehicle, the reading goes above the maximum line, then the scan tool records a few more frames of data before saving it, so you don’t have to keep checking the screen.

A green line then shows at what point the data was saved, and in the tool’s settings you can tell it how many frames of data you want it to record after the readings have gone beyond the minimum and maximum levels that you set up earlier.

Once you have got this running as you want, it will save you a lot of time when it comes to recording data and diagnosing your vehicles.

ADVICE FROM THE EXPERTS

Autodata, the UK’s leading supplier of technical information to the automotive aftermarket, shares fixes and problems raised through its technical helpline, available to all UK customers:

FIAT GRANDE PUNTO Brake Noise Q

We service aa2006 Punto1,4 1,4and andrecently recently replaced brake discs brake We serviced 2006Fiat Fiat Grande Grande Punto replaced thethe rearrear brake discs andand brake pads using genuine genuineFiat Fiatparts. parts.The The customer is now complaining of noisy brakes braking pads using customer is now complaining of noisy brakes whenwhen braking whilst downlong longhills. hills.We Wehave have checked brakes thoroughly cleaned whilst travelling travelling down checked thethe rearrear brakes andand thoroughly cleaned themthem with brake cleaner but can’t stop the noise. Can Autodata help?

with brake cleaner but can’t stop the noise. Can Autodata help?

Yes, we weare areaware awareofof this problem Yes, this problem which may mayaffect affectmodels models which manufacturedbefore beforeMarch March 2007. manufactured 2007.

Thenoise noiseyou youdescribe describe occurs when The occurs when thebrake brakepads padsvibrate vibrate the rear brake the ininthe rear brake caliper.

The cure for this problem is caliper. The cure for this problem is to to fit afit a ‘mass damper’ to each rear brake caliper ‘mass damper’ to each rear brake caliper (see illustration). The mass damper kit is (see illustration).

TheFiat mass damper kit is available from any dealership parts available from any Fiat dealership parts department. department.

A

Snap On Autodocta_Dec15.indd 1

30/11/2015 08:48 www.snapon.com/uk

7-PC Flank Drive® Plus Combination Wrench Set

• Contains sizes 10 – 15mm and 17mm

Was £186.15 Excl. VAT

£84.99 Excl. VAT SOEXM707

i

FLANK DRIVE® PLUS The series of flutes and notches exceed the performance of any other open end design and provide up to 62% more turning power and strength

8-PC Torx® Bit Set • Set of 8 Torx® Bits (T8T30) in a storage case • All bits are 1/4” hex shank Was £26.95 Excl. VAT

£16.85 Excl. VAT

GREAT ADD ONS TO A RATCHETING SCREWDRIVER

SDMC8T

4-PC Nut Driverr Set • Includes: 8mm, 10mm, 12mm and 14mm nut drivers

• Storage case to keep tools organised

• Magnets keep ferrous metal fasteners positioned in driver

• Use with Snap-on cordless screwdriver or magnetic ratcheting screwdriver

• High grade alloy material for long lasting durability

Was £16.30 Excl. VAT

£7.00 Excl. VAT PTNDM4KA

3-PC Razor Blade Scraper Set • Removes stickers, molding paint and decals • Use with standard, single edge steel or plastic razor blades

• Set includes 4" compact scraper, 8" standard scraper, 13" long scraper and a pack of 5 blades in a storage case

• Quick and easy blade changes

£44.10 Excl. VAT

• Angled head provides maximum leverage

MS3000

JANUARY 2016

£33.95 Excl. VAT

Autoload Utility Knife & 8M Tape Measure Set Smooth 3-position switch for retracting/reloading blades Quick change blade release button

Hassle free auto-locking tape remains in extended position

Thin design for comfort

Aluminium housing ensures rugged durability

Was £43.65 Excl. VAT

£39.90 Excl. VAT

Retractable auto-loading blade storage, holds up to 5 blades

Lightweight anodized aluminium body for durability

UTK150TPMAM8

ALREADY HAVE THE VAC201?

PERFECT WINTER WORKWEAR!

ADD THIS TO YOUR KIT FOR A TENNER!

Winter Jacket

Brake Bleeding Accessory Kit • Turn your VAC201 into a brake bleeder for easy bleeding of brakes Was £20.70 Excl. VAT

£10.00 Excl. VAT ITC1823-1

• Quilted polar fleece inside lining

• Concealed hood

• 2 patch pockets with flaps and studs

• Reflective sleeve piping

• 4 front zip pockets

• Adjustable cord at hem

• Internal map pocket

• Adjustable cuffs

• Inside pocket

• Snap-on logo detailing

• Sleeve pocket

£74.99 Excl. VAT

LOGOHDWJ-S/M/L/XL/XXL

www.snapon.com/uk

To help develop your diagnostic knowledge we offer:

1. Training and seminar sessions across the UK, see snapontraining.co.uk for more details 2. Online training for all our platforms. Plus, a comprehensive range of ‘how to’ videos and technical articles – simply visit diagnostics.snapon.co.uk All prices exclude VAT at 20%. Items are available from participating Snap-on Franchisees for a limited time while stocks last. Price, availability and specifications may change without notice. Actual colour may not be accurate due to print process. Errors and omissions excepted. Snap-on® and Blue-Point® are registered trademarks of Snap-on Inc. Other trademarks are the property of their respective registered proprietors. © Snap-on UK Holdings Ltd 2015.