1st EDITION
Tuesday May 8, 2012
FREE
Alpha ACS Series Helps Customers Take Charge Of Industrial Powering Needs
Meramec Electrical Products Announces TaylorMade RocketBallz Golf Club Giveaway
SpanGuardTM Power Line Markers: 50 Years Of Saving Lives
Alpha Industrial Power (AIP), an innovator in industrial-grade power solutions and a member of The Alpha Group, offers a new and flexible, highly efficient, battery charging solution with the addition of the Alpha Charging System High Performance (ACS-HP) Series. The ACS-HP Series is capable of charging multiple types of stationary batteries, primarily for industrial, petrochemical and utility applications. The series combines an extremely low
If you really want to compete, you need the very best equipment. You need equipment that delivers performance, accuracy and dependability. In golf, that means TaylorMade, who is known for producing the finest golf clubs in the world. In the demanding electric power industry, it means Meramec. For decades Meramec Electrical Products has been renowned for producing the highest quality Current Transformers in the business. No one
For over 50 years, SpanGuardTM markers from P&R Technologies have been saving lives and protecting valuable power lines by making them visible to low flying aircraft. Many of the original SpanGuard/HeliMark markers installed in the early 1960s remain in service to this day. Over the years, SpanGuard design has been improved and extended to a variety of models that fit nearly any application and budget, including EHV
A Cost-Effective, Practical Approach To Smart Grid Benefits
Win This Authentic 1/50th Scale Model Manitowoc 4100W Ringer Crane—Register At Booth #382
SAM, Inc.—Measuring Success From Your Perspective
continued on page 29
The following is an excerpt from the GridSense whitepaper
continued on page 29
Article courtesy of Sterling Lumber Company
For more than 30 years, U.S. investment in electrical transmission and distribution infrastructure has dwindled. Simultaneously, demand has risen. Not only have digital lifestyles increased the demand on our electrical grid, demand continues to grow as devices like electric vehicles become more prevalent. Looking at just one aspect of our aging grid, the Hartford Steam
Sterling Lumber, a family-owned business since 1949, manufactures sells and rents hardwood timber mats for ROW access, temporary roads, excavator, crane, and equipment support as well as environmental protection and safety. Be sure to stop by the Sterling booth at the 2012 IEEE Power & Energy Society
Got Vision?
LumaSense Adds ‘Smarts’ To Transformer Monitoring
continued on page 12
It’s time to see what you’ve been missing … the future of wildlife protection is Therm-A-Guard. Q: Please tell us a bit about the company, a brief history and overview of your business.
A: Therm-A-Guard is a division of Universal Thermography, Inc. that was formed in 1984 to provide infrared inspection services to the electric utility industry. We eventually realized a high demand for infrared-friendly wildlife protection and set out to create a guard that would allow both visual continued on page 24
continued on page 29
The ability to spot anomalies before they actually cause problems is the best way to describe the benefits of the rapidly growing portfolio of power-generation solutions from LumaSense Technologies. LumaSense was founded in 2005 through a series of acquisitions of proven global temperature and gas sensor brands. Today, the Santa Clara, Calif.based company has 250 employees across offices in nine countries. The company provides a host of solutions designed to help its customers improve efficiency by tracking some of their most difficult-to-measure continued on page 24
continued on page 21
Article courtesy of Surveying And Mapping, Inc.
Surveying And Mapping, Inc. (SAM, Inc.) has generated an impeccable reputation in the electric energy industry. As one of the largest surveying and mapping firms in the U.S., we have the resources, equipment, and industry experience to support electric power projects throughout North America. Our extensive experience includes renewable energy projects, continued on page 12
Röchling, A Leader In The Production And Fabrication Of Engineering Plastics
Visit Booth #509. Meet the Röchling team where every business is local. Röchling has 56 locations in 20 countries with more than 6,600 employees and 1.4 billion U.S. sales; a partner with global perspective. Röchling Engineering Plastics is an international leader in the production and fabrication of engineering plastics. Products for the electrical industry include semi-finished materials and machined components made from Durostone® and Glastic®, Lignostone® continued on page 24
4
Energy Power News
Tuesday, May 8, 2012
BURNDY: A Solution-Focused Manufacturer
When faced with an inquiry from a series of contractors and conductor manufacturers to provide a solution to the dilemma of crimping consistency along with a need for time saving— BURNDY delivered—providing a new and patented solution that removes guesswork and saves time in transmission connector installations. The design and application of crimping dies used to install transmission connectors is critical to their performance. Though there are many manufacturers of crimping tools, dies, or connectors in the marketplace, installers who use the
BURNDY Engineered System of tools, dies, and connectors know that they will achieve an extremely reliable connection. This is not chance, BURNDY understands how critical an effective connection is to any electrical system, and designs that effectiveness into their connection systems— the connector, tool, and die designed as a system. For transmission applications, “overlapping crimps” is the normal method for compressing deadends, splices, and jumper terminals. For all applications, BURNDY ensures that an appropriate ‘compression ratio’ is achieved
DuraSystems: The Word Leader In Passive Fire Protection Systems DuraSystems is the world leader in the design and application of passive fire protection systems to protect people and property from fire and blast. DuraSystems custom designed passive fire and blast protection systems are used in the power, hydrocarbon, commercial, institutional, infrastructure, transportation and
heavy industrial sectors around the globe. As a company, we manufacture unique products and offer a comprehensive design service to our clients achieving the best results when addressing specific fire or blast protection problems. DuraSystems also provides construction detailing, special project orientated products and
Induron: Coat It And Forget It Davies Hood became President of Induron Coatings, a 65-year-old Industrial Paint manufacturer January 1, 2012. Davies is the third generation owner of this family business. His previous positions at Induron have been Executive Vice President, Sales Manager, VP Operations and a regional sales representative. He joined the Induron Team in 1997 after helping start an Environmental Engineering firm. Davies holds a BS in Biology from Hampden-Sydney College in 1992.
Q: Please start by telling us a bit about the Induron and your history.
A: Induron is an industrial coatings manufacturer that began making paint for the Post-War steel industry in Birmingham, AL in 1947. Over the past 65 years, our company has strived to produce reliable protection through innovative coatings. Induron has adapted over the years in order to compete against much larger competitors. We have transitioned from producing predominantly primers for steel to high quality architectural paints to the industry leading lining for ductile iron sewer pipe. To come full circle, we are cur-
rently focused on producing traditional coatings for the power market. Q: Please tell us about the company's main product for the Power market.
A: We developed Induraguard 9200 to be the most cost-effective coating [often one coat] to fight corrosion on weathered galvanized or corroded carbon steel T&D structures. This product is high build, easy-to-use, has excellent wetting properties and provides unrivaled barrier protection that is all based on a totally sustainable resin system derived from plant material. The barrier protection is so good because of the synergistic properties provided by the proven pigment package or ingredients, some of which date all the way back to paints used by the ancient Greeks! Q: What features or benefits do these barrier pigments provide?
A: The micaceous iron oxide is a large lamellar-shaped pigment that provides a “labyrinth-effect” or “shielding” that slows the ingress of water, chlorides, and pollutants. Additionally it reduces the continued on page 21
between the connector and conductor, to optimize the lifetime of the connection, apply the appropriate force, and result in the best-finished connection surface. The BURNDY engineering team, after listening to the issues faced in the field, developed a family of 60 ton crimping dies with increased crimping widths and indicia marks. This resulted in a much improved installation practice for transmission connector installers and a decrease in per-connector installation time. By providing indicia marks on the die surface, a slight embossment is created on the crimped connector, providing the installer with the start location for the next overlapping crimp consistently—every time. By increasing crimping widths without sacrificing the continued on page 24
system testing which enables DuraSystems to manufacture custom-built solutions tailored to our client needs. DuraSystems custom designs and installs fire and blast walls, doors, barriers, cable trays, ventilation, and other passive fire protection systems. These passive systems protect personnel and property, which have been tested to the most stringent continued on page 21
Energy Power News An independent publication not affiliated with any other organization Gary Cox Publisher Steve Cox Senior Associate Publisher Rhonda Baker John McQuaig Deborah Yarbrough Associate Publishers Valerie Wilson Art Director Elena Cruz Editor Monique Cox Tiffany Cox Administration Energy Power News is published by Source Group LLC ©2012. All rights reserved.
6979 East Broadway Blvd., Suite 109 Tucson, AZ 85710 phone: (520) 722-2000 fax: (520) 722-2014 www.sourceg.net
More Robust Overhead Hardware System Designs Reduce Damage David L. Morris is the President of INWESCO, INCORPORATED. Morris acquired INWESCO, INCORPORATED February 1, 1999. INWESCO, Incorporated is a steel fabricator of pole line hardware, underground surface mounted products, access doors and a variety of additional components used in underground distribution of electric and telecommunications industries. INWESCO recorded sales of $5.20 million in sales revenue in 1999. Through the development of additional product and the Texas facility, INWESCO increased sales revenue to $14.88 million in the recent 2008 fiscal year. Brooks Products, Inc. previously employed Morris, for over 19 years. During his 19 years of employment, he held various engineering, management and executive positions. He contributed to the development of new precast concrete products, new & improved manufacturing processes, and designed production molds and tooling for the manufacturing of precast concrete products. He played a major role in the design and construction of the Brooks Products, Fontana manufacturing facility, (now Jensen Precast),
which included state of the art equipment and processes for the manufacturing of precast concrete products. Morris has also written the industry respected Quality Assurance Manual for the twelve operating Divisions of Brooks Products, Inc. Morris was President of Brooks Products, Inc. from 19961997. Prior to the Presidency he held the position of Vice President and Corporate Engineer from 1985-1996. He has also held the Position of General Manager for the Stockton, CA and Southern California Division (Fontana, CA). Under his direction and leadership, the Stockton Division grew to become one of the main three manufacturers in the Northern and Central Valley. In 1988 he was appointed to the executive committee and assumed the Division Manager’s role at the Fontana facility, which produced $14.5 million dollars of sales revenue, representing 23 percent of the total company’s sales. Morris earned BS degree in Architectural Engineering at the California State Polytechnic University at San Luis continued on page 21
12
Energy Power News
Tuesday, May 8, 2012
Kortick Manufacturing: Pole Line Hardware, Construction Specialties Kortick Manufacturing is an award-winning, domestic producer of pole line hardware based in Hayward, California. Since 1898, Kortick Manufacturing has produced pole line hardware for power and communications utilities.
What they do: • Produces 3,400 standard pole line hardware items • Provides modified and special design items for utility customers • Proven competitive pricing • Recognized short and reliable lead times • Four engineers on staff for testing and design • “Green” certified company with proven green initiatives
SAM, INC.
(continued from page 1)
route studies, greenfield projects, rebuilds, as-builts, inspections, maintenance projects, and vegetation management. Our staff of more than 375 includes 58 professional surveyors, five professional engineers, six certified photogrammetrists, over 90 fully-equipped field crews, and more than 100 technicians. The size of our workforce means we're able to accomplish large-scale projects on accelerated schedules. Founded in 1994, SAM, Inc. has strategically expanded from our initial offering of land surveying services to include digital aerial mapping (photogrammetry), high-definition surveying (HDS), subsurface utility engineering (SUE), utility coordination, and geo-
GRIDSENSE, INC.
(continued from page 1)
Boiler Insurance Company (HSB) stated, “Old transformers and new transformers are subjected to operating stress due to system growth and corresponding increases in loads. But the older transformers no longer have the physical strength to tolerate the high radial and compressive forces and thus fail more often.” What is true for transformers is equally true for other transmission and distribution assets. In years past, the solution would have been to build more power plants with brand new assets to meet the growing demand. Unfortunately, in the current economic and ecological environments, it is impossible to build ourselves out of this dilemma. The funds simply
• Family owned and operated
Threaded Fasteners, Inc.—Not Just Your Everyday Nut & Bolt House Article courtesy of Threaded Fasteners
For more information about Kortick Manufacturing, write to 2230 Davis Court, Hayward, CA, 94545, visit www.kortick.com, email sales@kortick.com, call 510-8563600 or fax 510-856-3606. Come see them at Booth #595.
In 1979, Threaded Fasteners opened as a small fastener distributor for the industrial market of Mobile, Alabama. Since then, we have become one of the largest fastener distributors and manufacturers in the Southeast. Over the years Threaded Fasteners has continued to make its mark as a reliable and very competitive source for utility related hardware. Our customers range from electric utility companies to the fabricators and suppliers that support those very utilities. With over $4 million of inventory in our five locations, not only do we serve the end users, but our customer base also includes many other fastener distributors. Many times our simple advantage is inventory. The sweetest sound to a buyer is “we have it in stock.” Threaded Fasteners has also become well known for thinking outside of the box when it comes to service and the packaging needs of our customers. We have staff specifically employed to
graphic information systems (GIS). In 2009, we became one of the first firms in the U.S. to invest in and successfully deploy mobile LiDAR technology, a groundbreaking data collection system that can collect survey-quality data at 400,000 points per second. In 2011, we added airborne LiDAR, from both fixed wing and helicopter platforms, to our inhouse capabilities. SAM, Inc. also has a wholly owned subsidiary, SAM-Construction Services, Inc., that offers a wide range construction phase services. With our integrated suite of mobile, airborne, and terrestrial LiDAR capabilities, we are experts at understanding how to effectively apply all of these tools, either individually or in combination. We have extensive data processing hardware and software resources and can deliver products in a wide variety of dig-
ital and CAD formats. Our complete geospatial approach gives our clients the benefit of a single point of contact for a comprehensive set of surveying and mapping solutions. The benefits to clients of using LiDAR-based solutions over traditional surveying data collection include the massive collection of much richer data within project limits; greater potential for faster turnaround of useable project data; increased safety from lower exposure to field hazards; decreased disruption of project sites due to surveying fieldwork; and potential reduction of costs for comparable traditional data collection. Our geospatial services division is experienced in a wide variety of mapping disciplines united by one goal― your success. With in-house pho-
togrammetry, LiDAR, and GIS solutions, we work with clients to determine the best technology to meet their project needs and schedules. Our extensive network, processing, and people-power offer a scalability of resources to ensure a timely delivery of quality geospatial products. Our systems and software are upgraded regularly so clients benefit from the efficiency and accuracy of the latest enhancements. Headquartered in Austin, Texas, we also have offices in Dallas, Houston, Atlanta and Salt Lake City, and our range continues to expand. If you'd like to know more about how we can help with your project, please visit our website at www.saminc.biz, call our toll-free number at 800-656-9525, or email sam@saminc.biz. We also invite you to visit us at Booth #1304.
aren’t there and customers could never absorb the costs of replacing huge chunks of the T&D infrastructure. In addition, the environmental consequences of building more of the same could be dire. To date, innovation in electrical transmission and distribution infrastructure has not kept pace with innovation in other industries. In 1975, cellular mobile phones as we know them did not exist. Today, they are everywhere. This and other communications technologies like mesh radio, Wi-Fi and 3G/4G have dramatically altered the telecommunications landscape. It is unlikely that Alexander Graham Bell, who invented the telephone, would recognize the industry his invention helped found. On the other hand, today’s electricity infrastructure would be quite familiar to Thomas Edi-
son, who patented the first electric distribution system. Not that much has changed since his time. Fortunately, the utility industry can leverage the advancements in IT and remote communications to catapult itself into the 21st century. The communications and computing revolutions are finally enabling the practical, cost-effective implementation of the smart grid. IT advancements have spawned a new generation of compact, highly accurate, cost-effective sensing devices that non-intrusively monitor and control transmission and distribution assets— from overhead and underground lines and large power transformers, right down to the residential transformer. With advanced communications, these sensors instantly report back to the control station
via multiple communications protocols, providing immediate notification of issues that could lead to disruptions and outages. With such sensors, utilities can reduce maintenance costs as crews no longer manually search the field for the faults because the control center receives instant notification pinpointing the issue. These sensors also increase the capacity of existing infrastructure by monitoring and balancing load, and extending asset life through preventive maintenance. This is energy efficiency at the transmission and distribution level, and sophisticated sensing devices that enable it are foundations of a more efficient grid—a smart grid. Get the full whitepaper and learn more about practical, cost-effective smart grid solutions at GridSense, Inc. Booth #3487.
New items: • Pole top extension: Extensions that are climbable, guyable and reliable to mount equipment on • Hardwood cross arms and poles: Hardwood cross arms and poles that require no treatment per the current ANSI standards, ultimately proving impervious to
termites and rot. • Sidewalk Guy fitting
manage large projects and special packaging requirements. The challenge of getting product to the customer on time and in a way that makes sense is not something we take lightly. Aside from our dedicated staff we are one of the largest stocking distributors of A394 transmission tower bolts in the nation. We have helped several utilities and fabricators on large transmission projects throughout the country and have been very successful. As the need for continued on page 21
Tuesday, May 8, 2012
P&R TECHNOLOGIES (continued from page 1)
markers for high voltage lines and aluminum markers for high temperature lines. All are routinely installed on hot lines by helicopter. All SpanGuard markers use spiral formed armor rods for secure attachment to the live conductor, OPGW or shield wire. The spiral preforms extend outward from the marker and actually reinforce and protect the conductor at the point of attachment. Completely slip-proof, they
DURASYSTEMS
(continued from page 4)
industry codes and standards.
About DuraSteel DuraSteel is the most stringently tested material in the passive fire protection sector and its applications in the various industries. DuraSteel has been tested for its resistance to fire, blast, impact, moisture, mold, physical strength, water tightness, sound attenuation, radiant heat and pressures. DuraSteel properties make it ideal for the design and construction of passive fire protection systems and applications to protect workplace injuries from
INDURON COATINGS (continued from page 4)
effects of ultra-violet on the sustainable resin. Zinc is a second pigment that will inhibit moistures pathway by actually expanding in size with moisture contact. The ceramic microspheres help with the filmbuild on edges and bolts; often the first areas to fail on transmission structures.
INWESCO
(continued from page 4)
Obispo, California. He is a registered Professional Civil Engineer in California, Arizona, Nevada, Florida and Tennessee. He also holds a Class A General Engineering Contractors License. Morris is an active member in various national professional societies. He is a member of the American Concrete Institute (ACI), the National Precast Concrete Association (NPCA), the American Society for Civil Engineers (ASCE) and the American Society for Testing Materi-
THREADED FASTENERS (continued from page 12)
project management continues to grow so will our determination to provide superior service in the area. Of course you can’t talk about Threaded Fasteners without talking about manufacturing. We have just as many customers who think of us as just a distributor as we do that think of us as just a manufacturer. Threaded Fasteners has
prevent line damage often associated with clamps that dig into the line. The preforms are matched at time of order to the specific size, type and diameter of line. SpanGuard markers for lines up to 500KV are constructed of K-10 ABS with a special UV weather cap. It resists fading, cracking or breaking and has 15 times the weatherability and color retention of fiberglass. SpanGuard markers for direct attachment to high corona and/or high temperature ACSS lines are made of aluminum and are rated up to 250° C
(482° F) and 500KV. The FAA advises that 36” markers be used on high transmission lines and hazardous river crossings. Smaller 20” markers are permitted on less extensive power lines or on lines below 50 feet in approaches to airports. Each marker should be a solid color—international orange, yellow, or white—and the FAA suggests that alternating colors be used on critical lines to optimize visibility in all seasons. (Orange alone may be difficult to see against fall foliage.) Because of their durable construc-
fire and blast. DuraSteel non-combustible properties provide compartmentalization, fire separation and migration. DuraSteel robust noncorrosive construction makes it an ideal material for both interior and exterior use to protect personnel and property. DuraSteel can be painted for aesthetic purposes. DuraSteel is a unique non-combustible material consisting of two metal sheets, galvanized or stainless steel, mechanically bonded to a cement fibre core. DuraSteel is exceptionally robust, resistant to impact, fire & blast, reduces sound, unaffected by moisture and once installed requires minimal maintenance and have a life expectancy of up to 40 years even in the
most severe environments. By combining lightweight and durable materials to make the facing layers and core, DuraSteel assemblies require minimal foundations for support. DuraSteel is essential for assemblies such as fire & blast barriers, enclosures, fire & blast doors, cable trays, duct assemblies. DuraSteel sheets have been tested to withstand a four-hour fire test, hose stream test and 2-Bar of post blast pressure.
Without the synergistic effects of these three barrier pigments the coating could never last 25-30 years with just one coat.
Energy Power News
21
tion, easy installation and “line friendly” performance, SpanGuard markers have been chosen by over 2,000 utilities, and all are repeat customers. In addition to power line markers, P&R Technologies offers an industry leading selection of bird diverters, LED FAA beacons and lighting, solar powered lighting, warning flags for low lines and thermal imaging for perimeter security. For more information, visit www.prtech.com, call 800-722-8078 (503-2928682 outside the U.S.) or stop by Booth #3154. ciality metals • Lightweight and strong tested to 3.2 N/mm2 UDL strength • Sound attenuation properties • Low maintenance • Cut using conventional tools • Reusable material • Manufactured to withstand hazardous and severe environments • Withstands extreme air pressures • Tested for vibration resistance • Zero flame spread with non-toxic byproducts • Manufacture under ISO 2000:9001
Features & Benefits • 4-hour fire protection • Resistance to fire, blast, impact and moisture • 40-year life expectancy • Galvanized, stainless steel or other spe-
For more information, call 866-338-0988, visit www.durasystems.com or stop by Booth #4186.
Q: Does Induron have other coatings for T&D?
Q: Are there locations one could see this coating in use?
A: We have projects nationwide; come visit one of our jobs today!
A: It is a very health and safety-minded coating with 92 percent solids by volume, very low VOC, zero HAPs and almost non-existent odor.
A: We have a complete systems approach to all T&D coatings needs; including flow-coatings and moisture cured tower footings [below grade]. We like to think our product line contains some old and some new technology.
A: Please stop by Booth #242, call 800324-9584 or visit www.induron.com.
als (ASTM). Morris is active in the C-27 “Precast Concrete”, and acted as SubCommittee Chairman of ASTM C-27.10 for more than 15 years. He also has participated in The Executive Committee (TEC) from 1991 to 1994. TEC provides senior management development programs and resources for CEOs and Presidents of companies to improve their management and leadership skills. INWESCO now services hundreds of utility companies across the United States and they pride themselves on innovation, quality, and service. With the capability of custom designing, world-
class engineering, and turn-key fabrication all under one roof, they can help you expedite the process of turning an idea into a quality finished product. They have helped many utility companies just like yours on countless projects. One major development in the overhead utilities has been a bold move by engineers at Southern California Edison to look for ways to ensure that their overhead distribution infrastructure will be able to hold up during the ever-increasing threat of seismic activity along the West Coast. Working alongside the many highly qualified people at SoCal
Edison they have developed a transformer cluster bracket and transformer platform that were carefully engineered and designed to hold up during tornadoes, hurricanes, and earthquakes. “Is your overhead distribution system able to withstand the loads generated by those events? We can help. Do you have your own design and are looking for engineering? We can help. Or do you have all that done and are looking for someone to fabricate and manufacture your products? Again, we can help. Stop by our Booth #4055 and see how we can help you!” says Morris.
been manufacturing anchor bolts since the early ’90s, however in the summer 2009 significant investments were made in our manufacturing division of the company. New equipment and additional space was added to accommodate our customers’ every growing anchoring and custom fastener needs. For years we have provided rebar cages and custom anchor bolts to jobsites all over North America, but one of the areas of manufacturing that received quite a bit of attention during the
expansion was our ability to hot head bolts. Since the investment we are also becoming known in the utility world as a reliable and cost effective manufacturer of square and hex head machine bolts, as well as step bolts. A company is only as good as its people right? Every employee at Threaded Fasteners has something to gain by taking care of the customer. They’re all owners of our company. Being an employee owned company def-
initely is unique and the pride the employees of Threaded Fasteners have in their company is second to none. You can actually walk up to any employee at Threaded Fasteners and say “Who owns this place?” and they might just say “I do!”…Priceless. It’s a fact, Threaded Fasteners holds a unique place in the world of nuts and bolts. For more information, call 800-3454976, visit www.threadedfasteners.com or stop by Booth #2780.
Q: Is this coating safe for painter?
Q: How can our readers find out more?
2
Energy Power News
THERM-A-GUARD
(continued from page 1)
and infrared inspections. Finally, in 2002, we received a U.S. Patent on our unique “see-through” design. Since then, electric utilities across America, and around the world, have made Therm-A-Guard their number one choice of wildlife protection.
Q: Please tell us about your company’s products.
A: Therm-A-Guard manufactures our patented wildlife protectors at our “Made in the USA” ISO Certified facility in Clearwater, Florida. Our guards are com-
LUMASENSE
(continued from page 1)
variables. The company’s highest-profile offerings for the energy space include thermal imaging, SF6 leak detection, fiber optic technology, and its newest solution—a new line of cost-efficient dissolved gas analysis (DGA) monitors.
Thermal Imaging Thermal imaging has been a mainstay of preventive maintenance in the energy segment. LumaSense, however, is one of the few companies globally that can provide integrated solutions for substations and electrical switchgear that combine pan-and-tilt thermal imaging, fixed thermal imaging and pyrometry. The ThermalSpection724 system provides software that can detect sudden temperature changes through various regions of
RÖCHLING USA
(continued from page 1)
Transformerwood®, and Hybrid® and the new Trafoboard®. All products are used extensively in power, dry, traction, furnace and cast resin transformers world-wide.
Competence. Quality. Innovation. Röchling strives for excellence. With more than 90 years of experience (over 50 years in North America), Röchling has an excellent reputation in this industry as a reliable and innovative partner with extensive knowledge of materials, their properties and applications. Q: How did Röchling begin?
A: Foundation laid in 1916 when competent engineers developed the first densi-
BURNDY
(continued from page 4)
compression ratio, installation time is reduced. The result is a dependable, quality installation requiring less crimps per connector, which also eliminates the guesswork. Just another BURNDY innovation in crimping die development!
Tuesday, May 8, 2012 posed of long lasting, UV stabilized, engineering-grade polymers insuring many years of use without degradation. Four size choices, along with the ability for top and side cut-outs, insures protection of nearly any bushing/pothead application from all forms of wildlife while still allowing for accurate infrared and visual inspections of the protected equipment. The view through our guards is clear enough to easily determine the exact cause of a hot spot and it’s actual temperature. Additionally, sight gauge oil levels in bushings can be verified. Our open design allows for increased air circulation thus maintaining cooler operating temperatures that are critical to the life expectancy of a bushing’s gasket.
Q: Who is a typical customer for your products?
interest (ROIs) to allow users to correct anomalies before they become catastrophes.
optics. LumaSense has provided winding hot spot temperature monitoring solutions for more than 30 years to over 5,000 transformers globally and is the only company that offers both Fluoroptic Thermometry (FOT) and Gallium Arsenide (GaAs) technology.
SF6 Leak Detection SF6 is commonly used in substations and GIS installations due to its arc quenching and insulating capabilities. SF6 leakage, though, is heavily regulated and considered one of the worst greenhouse gases. LumaSense’s SF6 leak-detection solutions are sensitive enough to measure down to 5 ppb, allowing for detection of leakage the minute it starts. They also allow for multipoint sampling to cover larger areas.
A: Therm-A-Guards are perfect for any electric utility seeking wildlife protection for visual and/or infrared inspections of their equipment. Our guards are fully hotstick installable making it unnecessary to de-energize equipment prior to installation. It is a fact that insects build nests in conventional animal guards so safety departments prefer Therm-A-Guards; ours allow crews to see nests prior to removal of a guard so insect killer can be sprayed directly at the nest preventing insect stings. When removing solid guards, crew members have no idea what is nesting inside. Our customer base ranges from the freez-
ing cold of Alaska to the hot desert of Dubai and every climate and location in between.
Q: Do you see any demand trends for your products?
A: Definitely! As higher reliability of the electric grid is expected by customers, and required by government regulators, the demand for our Therm-A-Guards to protect this power grid from animal interruptions will increase tremendously. Stock up now before we raise our prices! For more information, contact Therm-AGuard at 888-388-4348 or online at www.Therm-A-Guard.com. Stop by Booth #2895.
more than 40 years and is proven in the medical and automotive industries. These solutions offer the lowest total cost of ownership in the market, with streamlined installation that takes just a few hours. They also can integrate with fiber optic temperature monitoring. With features such as single valve installation, horizontal and vertical mounting, fast response time and integrated smart grid capability—SmartDGA will change the way utilities use and deploy online DGA monitoring.
Fiber Optics Considered one of the most critical parameters to monitor on transformers, measuring true winding hot spot temperature requires direct monitoring via fiber
“Smart” DGA Monitors LumaSense’s newest offering is a line of the industry’s most cost-effective and comprehensive DGA monitors for transformers and load tap changers (LTCs). The SmartDGATM portfolio offers three solutions designed for dedicated load tap changer DGA analysis (SmartDGA Gauge), early warning fault detection for transformers (SmartDGA Guard) and comprehensive DGA analysis (SmartDGA Guide). The technology behind this portfolio is Non-Dispersive Infrared (NDIR) that LumaSense has supplied for
fied wood, Lignostone® and patented it. They developed the processing of beech veneers laminated with synthetic resin pressed under heat and pressure. Lignostone® Transformerwood® has an excellent reputation and is the preferred rigid insulation of leading oil filled power transformer manufacturers.
electrical apparatus and applications. Types of glass, resin and filler ingredient combinations processed by pressing, forming, pultruding and filament winding is especially well suited for use in power generator construction, switchgear, tap changers, chemical processing equipment and transportation systems.
A: Cooperation is the key to attaining our goals. Confidence in each other and with our customers is the force behind the success. Count on Röchling. Every action we take is based on trust. Openness and honesty characterize personal relations with candid information exchange among ourselves, our partners and our customers.
Q: How does Röchling earn client confidence?
A: This week Mr. Jim Azzarello, Sales Manager of Röchling Glastic Composites, Cleveland, Ohio and Ms. Chris Rega, Composite Sales Manager of Röchling Machined Plastics, Mt. Pleasant, Pa., are on hand with supportive Röchling team members to answer additional questions. C’mon over to Booth #509; we want to meet you.
through 2156 (84/19 str.) This press has 60 tons of crimp force at 10,000 psi operating pressure—along with a single acting ram with a heavy-duty return spring for fast ram retraction. The removable die cap may be easily rotated allowing for quick removal of splice connectors while the upper die cap securely locks to a positive detent position for safe operation. Fast easy die
changing, secure die positioning with positive die release locking pins, a side lift handle for easy carrying are just some of the benefits of this remote crimp press dynamo. Stop by and see the Y60LW for yourself. Go with the BURNDY Engineered System that does it all—and does it consistently. Stop by and see BURNDY at Booth #1555 or visit www.burndy.com
Q: What is Röchling success based on?
A: Being successful is a never ending challenge. Röchling Group invests and expands ambitiously to continue providing thermoset insulation benefits in pursuit of customer satisfaction. Performance of Durostone® and Glastic® fiberglass reinforced plastics opens the electrical insulation market beyond Lignostone® Transformerwood® from oil filled power transformers to a variety of And, coming soon, a portable and light weight 60 Ton Remote Hydraulic Press! The Y60LW, at only 43 pounds, is the ultimate in crimping power at an optimized weight. Accepting the Wide L-Dies as described above, this remote crimp press has a large jaw opening to accommodate copper and aluminum code cables and aerial conductor sizes through 2500 kcmil and also ACSR
Listening, learning and cooperation birthed innovative ideas such as Lignostone® Hybrid®, densified laminated wood with Durostone® reinforcement to increase mechanical strength up to 40 percent and our recently established and proven addition of Trafoboard®, a laminated pressboard for highest requirements. See the exhibits in Booth #509.
LumaSense Technologies strives to be an innovative supplier of sensing solutions to the energy industry. And as the concept of smart grid creeps closer to reality, it appears the need for these types of solutions will only intensify. Visit LumaSense at Booth #3480 or at www.lumasenseinc.com.
Q: Who are the primary contacts at Röchling USA?
Tuesday, May 8, 2012
ALPHA INDUSTRIAL POWER (continued from page 1)
ripple output and greater than 93 percent efficiency to make for lower operating costs. Five hot-swappable Cordex 4.4kW rectifiers are stored in a compact 4RU shelf, providing immense power in a compact space. “The ACS-HP Series provides efficiency, flexibility and reliability in one system,” said Sam Ayoubi, AIP Vice President of Sales. “It supports wide
MERAMEC
(continued from page 1)
builds a better golf club than TaylorMade – and no one builds a better Current Transformer than Meramec. The Pros at Meramec want to help you improve your game—on the course, and in your business. Meramec Electrical Products announces the giveaway of a complete set of TaylorMade RocketBallz Golf Clubs at the 2012 IEEE PES Transmission and Distribution Conference and Exposition being held May 8 – 10 in Orlando, Fla. The prize, which includes one driver, two fairway woods, one full set of irons, one sand wedge, one putter, and one golf bag, will be awarded to a lucky winner at a drawing held at the Meramec
STERLING LUMBER (continued from page 1)
Transmission and Distribution Conference and Exposition. Drop off your business card and register for the Manitowoc 4100W Crane Model ($500 retail value) Give-Away. The winning registrant will be drawn at the end of the conference. And while you’re at our booth, let us explain how Sterling Lumber can: • Get the most cost-effective and safe matting product for your application. • Save you time and money through Sterling’s Coast-to-Coast Logistics and Distribution Capabilities. • Mobilize quickly and handle even the largest orders. • Sell new and used matting products. • Rent mats either short term or long term. Quality Hardwood Mats Since 1949 For sixty years, the Sterling family’s company has combined high-quality craftsmanship with service and delivery clients can rely on. Our consistent selection of high-grade timber maximizes the strength, performance and overall longevity of our Sterling Mats. Sterling’s precision manufacturing process assures optimum uniformity and durability. We will work with you to ensure you have the right product for the job.
Access Mats Sterling manufactures a variety of Access Mats, which are excellent for platforms or temporary roads for ROW access lines or site access. All mats utilize zinc-plated
Energy Power News
29
input ranges, from 187-312Vac single phase to 208-480Vac 3 phase, and systems are expandable with power options up to 800A. In addition, the Cordex monitoring and control package is unparalleled in today’s market.” The Cordex monitoring and control package provides complete access to battery management, data logging, daily statistics and charger system control. The CXC touch screen or Ethernet connection and Internet browser enable simple adjustment and control, regardless of local
or remote setup. “In one integrated package, we are able to offer remote system control, extremely high power density, wide input range and hot swappable modularity, all while maintaining a small footprint,” said Ayoubi. “It is a great example of efficiency in all elements of design: form, function, engineering and performance.” The ACS-HP Series is currently available to Alpha’s global customer base. For more information about the ACS-HP Series, stop by Booth #3766 or
Electrical Products Booth #1362 at 5:00 PM on May 9, 2012. Meramec Electrical Products is the preeminent manufacturer of Bushing Current Transformers for the high-voltage circuit breaker, large power transformer, generator, and utility markets. At Meramec, every Current Transformer we manufacture is made to our customers’ exact specifications. We excel in building a quality custom made product while providing the shortest turnaround time in the industry. During the past 40 years Meramec Electrical Products has produced over one million Current Transformers and precision components for our OEM customers and for the utility service aftermarket. Our customers have come to rely on the quality, dependability and
durability of our products. That is why Meramec has come to be known as “The Current Transformer Specialists.” At the IEEE PES Exposition, Meramec will introduce the ESP Outdoor Mounted Slip-Over Bushing Current Transformer. The ESP is a self-contained module specifically designed to be mounted over the high voltage terminal bushing of the vintage SP/SPS circuit breaker. This breaker is one of the most popular in the class of up to 72kV. Each unit is fully encapsulated in an ANSI 70 gray colored resin system that has been developed, tested and rated for outdoor use. The resilient exterior finish ensures accurate performance in extreme weather, has excellent chemical resistance, high dielectric strength and rugged physical proper-
ties to endure mechanical shock. With its easy installation features, it is a reliable and economical solution when upgrading system protection, adding additional metering points, or replacing aged and failing CTs. Meramec invites show attendees to stop by Booth #1362 to meet with the Meramec Pros and view our innovative technology and full line of Current Transformers that deliver performance, accuracy and dependability that really goes the distance. Stop by and enter the drawing for a complete set of TaylorMade RocketBallz golf clubs. For more information please call Brad Armstrong, Sales and Marketing Manager at Meramec Electrical Products at 575-885-2521, or by email at barmstrong@meramec-electrical.com.
carriage bolts, are countersunk and trimmed flush and square.
Crane Mats High-grade Sterling Crane Mats feature narrow lifting notches, exclusive use of oak timbers and other dense hardwoods, 1-1/4” diameter lifting bolts (countersunk and flush), and ends sealed with wax lumber paint. They are also available in Douglas Fir. • Thickness: 4”, 6”, 8”, 10” and 12” • Width: 36”, 48”, 60” and 72” • Length: 48” through 40’
Logistics And Delivery With our own fleet of delivery trucks and convenient rail and barge access, we can provide the shipping flexibility that is required to get you what you need, where you need it, and when you need it! With manufacturing and headquarters in Blue Island, Ill., sawmills in Mo., warehousing in Gary, Ind. and Alberta, Canada, we are centrally located for simple coast-tocoast delivery. Sterling Lumber can make your hardwood timber mat ordering and delivery process efficient and seamless, assisting with all of your technical or logistical challenges. Call 708-388-2223 for a free consultation on which mats to buy and the most efficient way to ship.
For many applications, Sterling Access Mats offer significant benefits over standard 8” Crane Mats for temporary roads and platforms: • 30% to 65% SAVINGS on Freight • 50% SAVINGS on Installation Costs • 50% SAVINGS on Extraction Costs • Wider sizes than a Crane Mat – up to 96” • Very effective for all types of equipment needing access to job site locations of all varieties
Classic Access Mats - Made of three alternately applied layers of hardwood lumber compressed together with zinccoated carriage bolts.
Interlocking Access Mats - Three interlocking fingers allow mats to lock together—no tools are required. Heavy Duty Access Mats - Solid top and bottom surfaces—no gap between hardwood boards Optional Lifting Cables - We install wire rope into the mat.
30’ and 40’ Crane Mats - Available in dense hardwood and Douglas Fir
Excavator Mats - 8” x 48” x 16’ and 18’ & 20’ Transition Mats (Standard & Heavy Duty) - Safely crawl your equipment on and off your mats.
Outrigger Mats - Sterling builds safe and strong outrigger mats to support even the largest mobile cranes in the country. We provide welded C-Channel Reinforced Mats with 1/2” steel plates for the larger cranes and lightweight portable mats for the smaller cranes and trucks.
visit http://www.alpha.com/acshp.
About Alpha Industrial Power Alpha Industrial Power, a member of The Alpha Group and a division of Alpha Technologies, provides innovative, industrial grade powering solutions through a diverse product line of large-scale battery systems, chargers, and UPS’s. Applications include power generation facilities, substations, electrical utilities, transportation systems, communication networks and other enterprises with unique powering.
Flexible Purchasing Options Buy direct and save. Buy new mats. Buy used mats. Sterling has flexible purchasing options as well as both short-term and long-term rental programs.
For more information, call 708-388-2223, visit www.sterlinglumber.com or stop by Booth #382.