Mobile
TECH DATA
FACE PANELS FOR WHEELHOUSE SYSTEMS
HIGH PRESSURE LAMINATE FACE PANELS High pressure laminate face panels provide a multipurpose, decorative and highly durable finish that allows Spacesaver Wheelhouse™ High-Density Mobile Storage Systems to be aesthetically and functionally integrated into any working environment. Decorative Tube Spacers
DESIGN AND CAPABILITIES Spacesaver’s High Pressure Laminate (HPL) face panels provide an alternative for finishing the faces and tops of mobile storage system ranges. The 3/4 inch (19 mm) thick panels feature particle board cores and an easy-to-clean, decorative WILSONART® surface. HPL panels conform to the National Electrical Manufacturers Association’s standards for resistance to surface wear, high temperatures, stains, impacts and abrasions, so they will withstand the wear and tear common in high traffic storage areas. They are available in a wide variety of designer colors to complement any decor. HPL fire retardant panels are also available. 1. As face panels. • with decorative tube spacers: powered and mechanical assist systems require extra space between storage housings and face panels to accommodate system controls and safety devices. Manual systems require extra space to accommodate waist-high locks and future upgrades to mechanical assist or powered operation. 2. As canopy tops or counter tops when stationary or mobile ranges are work-surface height. • with black T-mold edge banding: when panel edges are exposed. • with unfinished edges: when panel edges are concealed or aligned adjacent to each other and a tight seam is desired.
www.southwestsolutions.com S t o r a g e
S o l v e d®
.030" (0.76 mm) Phenolic Laminate Backer 45 lb./cu. ft. (720 kg/m3) Density Particle Board Core .040" (1.0 mm) High Pressure Laminate
.030" (0.76 mm) Phenolic Laminate Backer 45 lb./cu. ft. (720 kg/m3) Density Particle Board Core T-Mold
.040' (1.0 mm) High Pressure Laminate
NOTE: Black T-Mold edge banding can be applied to one, two or three of four edges of HPL panels as the system configuration requires.
TECH DATA F a c e P a n e l s f o r W h e e l h o u s e S y s t e m s
APPLICATION HPL face panels are available on all Spacesaver powered, mechanical assist and manual systems. WILSONART® basic laminates and phenolic backing sheets are standard. Others are available. Contact factory for details. Card holders must be ordered separately. FACE PANEL VERTICAL SPACER DETAILS AND DIMENSIONS: POWERED WHEELHOUSE SYSTEMS use decorative tube spacers
MECHANICAL ASSIST WHEELHOUSE SYSTEMS use decorative tube spacers
Decorative Tube Spacer
Decorative Tube Spacer
Decorative Tube Spacer
4 ¼”
(102 mm)
HPL Face Panel
MANUAL WHEELHOUSE SYSTEMS use decorative tube spacers
HPL Face Panel
½”
7 ¼”
(178 mm)
3 ½”
(13 mm)
(89 mm)
HPL Face Panel
6”
(146 mm)
2 ¼”
(57 mm)
Control Head
TECHNICAL SPECIFICATIONS HIGH PRESSURE L AMINATE FACE PANELS: All exposed ends (refer to drawings) shall have .040" (1.0 mm) thick high-pressure laminate panels (color to be selected from manufacturer’s standards) with a .030" (0.76 mm) backer applied to a 45 lb./cu. ft. (720 kg/m3) density particle board core. Panels shall be 3/4" (19 mm) thick, and all visible exposed edges shall be finished with decorative black tube spacers.
Specifications are subject to change.
Spacesaver Corporation 1450 Janesville Avenue Fort Atkinson, WI 53538-2798 1-800-492-3434 www.spacesaver.com Spacesaver Corporation is a division of KI. KI and Spacesaver are registered trademarks of Krueger International, Inc. Spacesaver is a registered trademark of Spacesaver Corporation. © 2009 KI and Spacesaver Corporation. All Rights Reserved. SC-09103 SSC/SSC 05/09
www.southwestsolutions.com
KI 1330 Bellevue Street P.O. Box 8100 Green Bay, WI 54302-8100 1-800-424-2432 www.ki.com