Mobile
TECH DATA
FACE PANELS FOR WHEELHOUSE SYSTEMS
LOW PRESSURE LAMINATE FACE PANELS Low pressure laminate face panels provide a multipurpose, economical finish for Spacesaver Wheelhouse™ High-Density Mobile Storage Systems, have an attractive, clean appearance and feature the durability to wear well in high-traffic areas. Decorative Tube Spacers
DESIGN AND CAPABILITIES Spacesaver’s Low Pressure Laminate (LPL) panels provide a low-pressure, melamine alternative for finishing the faces and tops of mobile storage system ranges. The 3/4 inch (19 mm) thick panels with particle board cores offer an easy-to-clean, decorative surface on both sides. LPL panels are thermally fused for built-in durability. Delamination is impossible, and their resistance to stains, scratches, abrasions, chip-out, burnishing, steam and radiant heat means added durability. They are available in selected designer colors and patterns that blend with any decor, and they can be sized to fit any surface of a system that needs to be finished.
Color Surface 45 lb./cu. ft. (720 kg/m3) Density Particle Board Core Color Surface
Color Surface 45 lb./cu. ft. (720 kg/m3) Density Particle Board Core
1. As face panels.
• with decorative tube spacers: powered and mechanical assist systems require extra space between storage housings and face panels to accommodate system controls and safety devices. Manual systems require extra space to accommodate waist-high locks and future upgrades to mechanical assist or powered operation. 2. As canopy tops or counter tops when stationary or mobile ranges are work-surface height. • with black T-mold edge banding: when panel edges are exposed. • with unfinished edges: when panel edges are concealed or aligned adjacent to each other and a tight seam is desired.
www.southwestsolutions.com S t o r a g e
S o l v e d®
Color Surface Decorative T-Mold Edge Banding
NOTE: Black T-Mold edge banding can be applied to one, two or three of four edges of LPL panels as the system configuration requires.
TECH DATA F a c e P a n e l s f o r W h e e l h o u s e S y s t e m s
APPLICATION LPL face panels are available on all Spacesaver powered, mechanical assist and manual systems. Card holders must be ordered separately. FACE PANEL VERTICAL SPACER DETAILS AND DIMENSIONS: POWERED WHEELHOUSE SYSTEMS use decorative tube spacers
MECHANICAL ASSIST WHEELHOUSE SYSTEMS use decorative tube spacers Decorative Tube Spacer
Decorative Tube Spacer
4 ¼”
(102 mm)
LPL Face Panel
MANUAL WHEELHOUSE SYSTEMS use decorative tube spacers
Decorative Tube Spacer
LPL Face Panel
½”
7 ¼”
(178 mm)
3 ½”
(13 mm)
(89 mm)
LPL Face Panel
6”
(146 mm)
2 ¼”
(57 mm)
Control Head
TECHNICAL SPECIFICATIONS LOW PRESSURE LAMINATE FACE PANELS: All exposed ends (refer to drawings) to have low-pressure laminate panels. (Color to be selected from manufacturer’s standards.) Panels shall be 3/4" (19 mm) thick and constructed of a 45 lb./cu. ft. (720 kg/m3) density particle board core and shall have decorative faces on both sides. All visible exposed edges shall be finished with decorative black tube spacers.
Specifications are subject to change.
Spacesaver Corporation 1450 Janesville Avenue Fort Atkinson, WI 53538-2798 1-800-492-3434 www.spacesaver.com Spacesaver Corporation is a division of KI. KI and Spacesaver are registered trademarks of Krueger International, Inc. Spacesaver is a registered trademark of Spacesaver Corporation. © 2009 KI and Spacesaver Corporation. All Rights Reserved. SC-09104 SSC/SSC 05/09
www.southwestsolutions.com
KI 1330 Bellevue Street P.O. Box 8100 Green Bay, WI 54302-8100 1-800-424-2432 www.ki.com