Luna catalog by ENTER ID

Twist drills Short "Luna". HSS. Helix pitch 28째. Point angle 118째. Vapour treated.

Art. no.

Diameter

Overall length

Flute length

20931 -0101 -0200 -0309 -0408

mm 1 1.5 2 2.5

mm 34 40 49 57

-0507 -0606 -0705 -0804

3 3.3 3.5 4

-0903 -1000 -1109 -1208

4.2 4.5 5 5.5

Nr 20931

Art. no.

Diameter

Overall length

Flute length

mm 12 18 24 30

Quantity drill per SB-card 2 2 2 2

20931 -1307 -1406 -1505 -1604

mm 6 6.5 6.8 7

mm 93 101 109 109

mm 57 63 69 69

Quantity drill per SB-card 1 1 1 1

61 65 70 75

33 36 39 43

2 2 2 2

-1703 -1802 -1901 -2008

7.5 8 8.5 9

109 117 117 125

69 75 75 81

1 1 1 1

75 80 86 93

43 47 52 57

1 1 1 1

-2107 -2206 -2305 -2404 -2503

9.5 10 11 12 13

125 133 142 151 151

81 87 94 101 101

1 1 1 1 1

Short - machined shank "Luna". With machined straight shank. HSS. Helix pitch 28째. Point angle 118째. Vapour treated.

Art. no. 20512 -0108 -0207 -0306 -0405 -0504 -0603 -0702 -0801 -0900 -1007

Diameter mm 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15

Overall length mm 133 142 142 151 151 151 160 160 169 169

Flute length mm 87 94 94 101 101 101 108 108 114 114

Cyl. drive mm 10 10 10 10 10 10 10 10 10 10

No 20512

Art. no. 20512 -1106 -1205 -1304 -1403 -1502 -1601 -1700 -1809 -1908 -2005

Diameter mm 15.5 16 16.5 17 17.5 18 18.5 19 19.5 20

Overall length mm 178 178 184 184 191 191 198 198 205 205

Flute length mm 120 120 125 125 130 130 135 135 140 140

Cyl. drive mm 10 10 13 13 13 13 13 13 13 13

Drill sets With wood, metal and concrete drills "Luna". Combi-Box. Twist drills for metal, concrete and wood. The drills have the same diameters in the three different series. Plastic cassette with twist top to set to the required dimension according to a graduated scale. One drill can be taken out per setting.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . No. of drills . . . . . . . . . . . . . . . . . . . . . . Dimensioners . . . . . . . . . . . . . . . . . . . .

20873 ea. mm

-0101 18 3 4 5 6 8 10

No 20873

With high speed steel drill bits

"Luna". Maxi-Box. Twist drills HSS. Plastic cassette with twist top to set to the required dimension according to a graduated scale. One drill can be taken out per setting.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. of drills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dimensions (0.5 mm interval) . . . . . . . . . . . . . . . . . . . . . . . . . .

20954 ea. mm

-0103 19 1-10

Chisel tools

Pointed chisel

"Luna". Striking tools with SDS+-plus-drive. For working on concrete and other building materials. Total length 250 mm.

Art. no. . . . . . . . Chisel type . . . .

No 20954

20684

-0100 Pointed chisle

-0209 Flat chisel width 20 mm

-0308 Spade chisel width 40 mm

Flat chisel

Spade chisel

Tile drill "Luna". Drill with four-fluted tungsten carbide tip. For drilling glass, mirrors, bottles, glazed tiles, ceramics and porcelain.

Art. no.. . . . . . Diameter . . . . Length . . . . . .

20012 mm mm

-0103 4 65

-0202 5 68

-0301 6 71

-0400 8 80

-0509 10 90

-0608 12 100

No 20012

1 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 1))

Masonry drills Installation drills "Luna". Twist drills with tungsten-carbide tips for drilling in concrete, natural stone, brick, marble, ceramics etc. For use in standard drilling machines as well as percussion drilling machines.

No 20683

Artnr 20683 -0101 -0200 -0309 -0408 -0507

Drilldiam. mm 3.0 3.5 4.0 4.5 5.0

Overall length mm 60 75 75 85 85

Twist length mm 30 40 40 50 50

-0606 -0705 -0804 -0903 -1000

5.0 5.5 5.5 6.0 6.0

150 85 150 100 150

100 50 100 60 100

-1109 -1208 -1307 -1406 -1505

6.0 6.0 6.5 7.0 7.5

400 600 100 100 120

200 300 60 60 80

-1604 -1702 -1802 -1901 -2008

8.0 8.0 8.0 8.0 8.5

120 200 400 600 120

80 40 250 300 80

-2107 -2206

9.0 9.5

120 120

80 80

Artnr 20683 -2305 -2404 -2503

Drilldiam. mm 10.0 10.0 10.0

Overall length mm 120 200 400

Twist length mm 80 140 200

-2602 -2701 -2800 -2909 -3006

10.0 11.0 12.0 12.0 12.0

600 120 150 400 600

300 100 100 200 300

-3105 -3204 -3303 -3402 -3501

13.0 14.0 14.0 15.0 16.0

150 150 400 150 150

100 100 200 100 100

-3600 -3709 -3808 -3907 -4004

16.0 17.0 18.0 18.0 20.0

400 160 160 400 160

200 95 100 200 95

-4103 -4202 -4301

20.0 22.0 24.0

400 160 160

200 95 95

Hammer drills "Luna". Percussion drills with SDS-plus-shank. With hard metal blade. For making holes in concrete, granite, brick and other similar building materials.

No 20680

Art. no.

Diam.

20680 -0104 -0203 -0302 -0401 -0500

mm 4.0 5.0 5.0 5.5 5.5

Overall length mm 110 110 160 110 160

Flute length mm 50 50 100 50 100

-0609 -0708 -0807 -0906 -1003

6.0 6.0 6.0 6.0 6.5

110 160 210 260 160

50 100 150 200 100

-1102 -1201 -1300 -1409 -1508

7.0 7.0 8.0 8.0 8.0

110 160 110 160 210

50 100 50 100 150

-1607 -1706 -1805 -1904 -2001

8.0 8.0 9.0 10.0 10.0

260 450 210 110 160

200 400 150 50 100

-2100 -2209 -2308 -2407 -2506

10.0 10.0 10.0 10.0 10.0

210 260 300 450 600

150 200 250 400 550

-2605 -2704 -2803 -2902 -3009

11.0 12.0 12.0 12.0 12.0

160 160 210 260 300

100 100 150 200 250

-3108 -3207

12.0 12.0

450 600

400 550

Art. no.

Diam.

20680 -3306 -3405 -3504

mm 13.0 13.0 14.0

Overall length mm 160 300 160

Flute length mm 100 250 100

-3603 -3702 -3801 -3900 -4007

14.0 14.0 14.0 15.0 15.0

260 300 450 160 260

200 250 400 100 200

-4106 -4205 -4304 -4403 -4502

15.0 16.0 16.0 16.0 16.0

450 160 210 300 450

400 110 150 250 400

-4601 -4700 -4809 -4908 -5004

16.0 18.0 18.0 18.0 18.0

600 210 300 450 600

550 150 250 400 550

-5103 -5202 -5301 -5400 -5509

18.0 20.0 20.0 20.0 20.0

1000 210 300 450 600

950 150 250 400 550

-5608 -5707 -5806 -5905 -6002

22.0 22.0 24.0 24.0 25.0

260 450 260 450 260

200 400 200 400 200

-6101 -6200 -6309

25.0 26.0 26.0

450 260 450

400 200 400

2 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 2))

Masonry drills Hammer drills "Luna". Percussion drills with SDS-max-shank. With 4 tungsten-carbide tips For drilling in concrete, granite, brick and other similar building materials.

Art. no.

Drilldiam. mm 16.0 16.0 18.0 18.0 20.0 20.0 22.0 25.0 28.0 30.0 32.0 35.0

20682 -0102 -0201 -0300 -0409 -0508 -0607 -0706 -0805 -0904 -1001 -1100 -1209

Overall length mm 340 540 340 540 340 540 520 520 570 570 570 570

No 20682

Flute length mm 200 400 200 400 200 400 400 400 450 450 450 450

Set "Luna". Percussion drills with SDS-plus-shank. With hard metal blade. For making holes in concrete, granite, brick and other similar building materials. Drill cassette of enamelled sheet metal with resp. drill dimensions marked.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . Contains no. of drills . . . . . . . . . . . . . Drill dimensions . . . . . . . . . . . . . . . . .

20681 ea. mm

-0103 9 5x110 5.5x110 (2 ) 6x110 8x110 6x160 8x160 10x160 12x160

No 20681

Drills for wood Twist drills with cyl. shank "Luna". High speed steel HSS. With centre point and side cutter.

Art. no. . . . . . . . . . . . Diameter . . . . . . . . . . Total length . . . . . . . . Shank diam. . . . . . . .

20080 mm mm mm

-0100 3 61 3

-0209 4 75 4

-0308 5 86 5

No 20080

-0407 6 93 6

-0506 7 109 7

-0605 8 117 8

-0704 10 133 10

-0803 12 151 12

Long reach bits "Luna". Drill section of high speed steel. Shank of special steel. Suitable for drilling mouldings, etc.

No 20933

Drill diameter mm 6 8 10 12

Cyl. shank

Total length 400 mm Art. no.

Total length 600 mm Art. no.

mm 5 6 8 8

20933 -0109 -0208 -0307 -0406

20933 -0901 -1008 -1107 -1206

14 16 18 20

8 10 10 10

-0505 -0604 -0703 -0802

-1305 -1404 -1503 -1602

22 24 25 26

10 11 11 11

-1701 -1800 -1909 -2006

28 30

11 11

-2105 -2204

Auger bits with 1⁄4″ and 3⁄8″ hexagonal drive "Luna". With 1⁄4″ and 3⁄8″ g-drive. With feeder screw. The design of the auger gives smooth surfaces and a very good feed. Suitable bit extension 1⁄4″ see page 0000. Suitable bit extension 3⁄8″ see page 0000.

No 20723

Art. no.. . . . . . . . . Diameter . . . . . . . Shank diam. . . . . Auger length . . . . Total length . . . . .

20723 mm inch mm mm

-0103 6 1⁄4 150 230

-0202 8 1⁄4 150 230

-0301 10 1⁄4 150 230

-0400 11 1⁄4 150 230

-0509 12 1⁄4 150 230

-0608 13 1⁄4 150 230

-0707 14 1⁄4 150 230

-0806 16 1⁄4 150 230

-0905 18 1⁄4 150 230

Art. no.. . . . . . . . . Diameter . . . . . . . Shank diam. . . . . Auger length . . . . Total length . . . . .

20723 mm inch mm mm

-1101 20 3⁄8 150 230

-1200 22 3⁄8 150 230

-1309 24 3⁄8 150 230

-1408 26 3⁄8 150 230

-1507 28 3⁄8 150 230

-1606 30 3⁄8 150 230

-1705 32 3⁄8 150 230

-1804 35 3⁄8 150 230

-1903 38 3⁄8 150 230

-1002 19 1⁄4 150 230

3 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 3))

Drills for wood Auger bits with 1⁄4″ and 3⁄8″ hexagonal drive "Luna". Long twist drills with 1⁄4″ and 3⁄8″ g drives. With feeder screw. The design of the auger gives smooth surfaces and a very good feed. Suitable drill extension 1⁄4″ see page 0000. Suitable drill extension 3⁄8″ seepage 0000.

No 20848

Art. no. . . . . . . . . . . . . . Diameter . . . . . . . . . . . . Shank diameter . . . . . . Auger length . . . . . . . . . Total length. . . . . . . . . .

20848 mm inch mm mm

-0103 6 1⁄4 300 400

-0202 8 1⁄4 300 400

-0301 10 1⁄4 300 400

-0400 12 1⁄4 300 400

-0509 13 1⁄4 300 400

-0608 14 1⁄4 300 400

-0707 16 1⁄4 300 400

-0806 18 1⁄4 300 400

-0905 19 1⁄4 300 400

Art. no. . . . . . . . . . . . . . Diameter . . . . . . . . . . . . Shank diameter . . . . . . Auger length . . . . . . . . . Total length. . . . . . . . . .

20848 mm inch mm mm

-1002 20 3⁄8 300 400

-1101 22 3⁄8 300 400

-1200 24 3⁄8 300 400

-1309 26 3⁄8 300 400

-1408 28 3⁄8 300 400

-1507 30 3⁄8 300 400

-1606 32 3⁄8 300 400

-1705 35 3⁄8 300 400

-1804 38 3⁄8 300 400

Speedbits "Luna". With 1⁄4″ g-drive. Flat. With pilot. Polished. Suitable drill extension see page 0000.

No 20721

Art. no. . . . . . . . . . . . . . . . Diameter . . . . . . . . . . . . . . Shank diameter . . . . . . . . Total length . . . . . . . . . . .

20721 mm inch mm

-0105 6 1⁄4 150

-0204 8 1⁄4 150

-0303 10 1⁄4 150

-0402 12 1⁄4 150

-0501 13 1⁄4 150

-0709 14 1⁄4 150

-0709 16 1⁄4 150

-0808 17 1⁄4 150

Art. no. . . . . . . . . . . . . . . . Diameter . . . . . . . . . . . . . . Shank diameter . . . . . . . . Total length . . . . . . . . . . .

20721 mm inch mm

-0907 18 1⁄4 150

-1004 19 1⁄4 150

-1103 20 1⁄4 150

-1202 21 1⁄4 150

-1301 22 1⁄4 150

-1400 24 1⁄4 150

-1509 25 1⁄4 150

-1608 26 1⁄4 150

Art. no. . . . . . . . . . . . . . . . Diameter . . . . . . . . . . . . . . Shank diameter . . . . . . . . Total length . . . . . . . . . . .

20721 mm inch mm

-1707 28 1⁄4 150

-1806 30 1⁄4 150

-1905 32 1⁄4 150

-2002 34 1⁄4 150

-2101 35 1⁄4 150

-2200 36 1⁄4 150

-2309 38 1⁄4 150

-2408 40 1⁄4 150

"Luna". Long pilot drills with 1⁄4″ g drive. Flat. With pilot. Polished. Suitable drill extension, see page 0000.

No 20752

Art. no. . . . . . . . . . . . . . . . Diameter . . . . . . . . . . . . . . Shank diameter . . . . . . . . Total length . . . . . . . . . . .

20752 mm inch mm

-0107 6 1⁄4 400

-0206 8 1⁄4 400

-0305 10 1⁄4 400

-0404 12 1⁄4 400

-0503 13 1⁄4 400

-0602 14 1⁄4 400

-0701 16 1⁄4 400

-0800 17 1⁄4 400

Art. no. . . . . . . . . . . . . . . . Diameter . . . . . . . . . . . . . . Shank diameter . . . . . . . . Total length . . . . . . . . . . .

20752 mm inch mm

-0909 18 1⁄4 400

-1006 19 1⁄4 400

-1105 20 1⁄4 400

-1204 21 1⁄4 400

-1303 22 1⁄4 400

-1402 24 1⁄4 400

-1501 25 1⁄4 400

-1600 26 1⁄4 400

Art. no. . . . . . . . . . . . . . . . Diameter . . . . . . . . . . . . . . Shank diameter . . . . . . . . Total length . . . . . . . . . . .

20752 mm inch mm

-1709 28 1⁄4 400

-1808 30 1⁄4 400

-1907 32 1⁄4 400

-2004 34 1⁄4 400

-2103 35 1⁄4 400

-2202 36 1⁄4 400

-2301 38 1⁄4 400

-2400 40 1⁄4 400

Set

"Luna". Centre drill set with 1⁄4″ g-drive. Flat with pilot. Supplied in plastic case.

Art. no. . . . . . . . Drill sizes . . . . . . Shank. . . . . . . . .

No 20722

20722 mm inch

-0104 10-13-16-19-22-25 1⁄4

Drill extensions "Luna". Suitable for pilot drills and twist drills with 1⁄4″ hexagonal drive. No 20724

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Total length . . . . . . . . . . . . . . . . . . . . . . . . . . . Head’s outside diameter . . . . . . . . . . . . . . . . Cyl. hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For drills with 1⁄4″ hexagonal drive . . . . . . . .

20724 -0102 mm 300 mm 15 mm 7 mm 16-40

"Luna". Suitable for twist drills with 3⁄8″ hexagonal drive. No 20725

4 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 4))

20725 -0101 mm 300 mm 18 mm 10.5 mm 20-38

Drills for wood Hinge drill bits "Luna". Double cutting hard metal - with centre point. Straight shank.

Art. no. . . . . . . . . . . . . . . . . . . . . . Diameter . . . . . . . . . . . . . . . . . . . . Shank diameter . . . . . . . . . . . . . . Total length. . . . . . . . . . . . . . . . . .

20862 mm mm mm

-0104 26 8 60

-0203 30 8 60

-0302 35 8 60

No 20862

Hollow chisels with drill "Luna". From tool steel. Hardened and polished. For drill mortising machines. Gives square hole. Rectangular holes are obtained by repeated chiseling. Straight shank.

No 20551

Size ❒

Hollow chisels with drill Chisel depth

Art. no.

mm 6.4 8.0 9.5 11.0

20551 -0100 -0209 -0308 -0407

mm 45 60 70 70

Shank ∅×length mm 19×40 19×40 19×40 19×40

12.7 14.0 15.0 18.0

-0506 -0605 -0704 -0803

80 80 100 135

19×40 19×40 19×40 28.5×40

Mortice drill adaptor "Luna". For mounting in bench drilling machines with throat ∅ 58 or 55-66 mm. The piece of wood must be secured in a machine vice to prevent it following the return stroke.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For connection to . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connection diameter . . . . . . . . . . . . . . . . . . . . . . . . . For hollow chisel shank ∅ . . . . . . . . . . . . . . . . . . . .

20828

-0206 bench drill ∅ 58, 55-66 19

mm mm

No 20828

Countersink For wood "Luna". With two tungsten carbide tips. For assembly on cylindrical drills. Drilling and countersinking then takes place at one time. Countersink angle 90°.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For drill diameters . . . . . . . . . . . . . . . . . . . . . . . . . . Countersink angle . . . . . . . . . . . . . . . . . . . . . . . . . .

20897 mm

-0103 3.0-7.2 90°

No 20897

Bits for wood Slot mortising bits "Luna". Made of tool steel. With two straight blades Polished. Cylindrical drive length 50 mm. (High-speed steel can be supplied on special order.)

Art. no. . . . . . . . . . . . . Diameter . . . . . . . . . . . Thread. . . . . . . . . . . . . Cutting length. . . . . . . Total length . . . . . . . . Shank diameter . . . . .

20867 mm

Art. no. . . . . . . . . . . . . Diameter . . . . . . . . . . . Thread. . . . . . . . . . . . . Cutting length. . . . . . . Total length . . . . . . . . Shank diameter . . . . .

20867 mm

mm mm mm

-0109 6 Right

-0208 6 Left

35 105 13

-0703 12 Right

-0307 8 Right

-0406 8 Left

-0505 10 Right

45 115 13

-0802 12 Left

60 135 13

-0901 14 Right

No 20867

-0604 10 Left

50 125 13

-1008 14 Left

-1107 16 Right

70 145 13

-1206 16 Left

75 155 13

Chuck collets "Luna". Chuck collets for millers and cylindrical attachments. Used when the check collet and the miller cylindrical attachment do not have the same diameter.

No 20971

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chuck inner – outer diameter . . . . . . . . . . . . . . . . .

20971 mm

-0102 6-8

-0201 6.3-8

-0300 6.3-9.5

-0409 6-12

-0508 6-13

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chuck inner – outer diameter . . . . . . . . . . . . . . . . .

20971 mm

-0607 8-9.5

-0706 8-12

-0805 8-13

-0904 9.5-12

-1001 12-13

5 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 5))

Bits for wood Router bits "Luna". Hard metal. Slotting bits: series 20999 all models are double fluted except those marked (1) = single flute, marking (S) denotes solid tungsten carbide. Series 21001are extra long slotting bits. Lock case bits: 2100-0103 has shank mounted bearing 16x8 mm. 21002-0202 and 21003-03013 without bearings with angled cutter that lifts up chips. Extra bearings see 21072 page 0000. Diameter

No 20999

No 21001

No 21002

Bladewidth

Total length

Shank diam.

mm mm mm mm Slotting bits 20999 2(S) (1) 10 54 6 3(S) (1) 10 54 6 4(S) (1) 12 66 6 5(S) (1) 15 63 6 6(S) (1) 20 70 6 8 25 63 6 10 25 63 6 12 25 63 6 14 25 63 6 16 25 63 6 18 25 63 6 20 25 63 6 2(S) 10 53 8 3(1) 10 53 8 3(S) 10 53 8 4(1) 12 56 8 4(S) 12 56 8 5(1) 15 60 8 5(S) 15 60 8 6(1) 18 65 8 6(S) 20 66 8 8 20 62 8 8(S) 20 70 8 10 25 63 8 12 25 63 8 14 25 63 8 16 25 63 8 17 25 63 8 18 25 63 8 20 25 63 8 22 25 63 8 24 25 63 8 25 25 63 8 26 25 63 8 28 25 63 8 35 25 63 8 12 30 75 12 16 30 72 12 18 30 72 12 20 30 72 12 22 30 72 12 25 30 72 12 30 30 72 12 35 30 72 12 8 20 60 13 10 25 67 13 12 30 70 13 14 30 75 13 16 35 75 13 18 35 75 13 20 35 75 13 25 35 80 13 Slotting bits. Extra long 21001 8 20 80 8 10 20 80 8 10 30 90 12 12 20 80 8 12 35 90 12 14 20 80 8 16 20 80 8 16 35 90 12 18 20 80 8 18 35 90 12 20 20 80 8 20 35 90 12 22 20 80 8 22 35 90 12 25 20 80 8 25 35 90 12 30 35 90 12 35 35 90 12 Lock case bits 21002 16 15 110 8 20 20 110 8 20 20 110 12

6 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 6))

No bottom cutter

Bottom cutter

Artnr 20999

Artnr

-0605 -0704 -0803 -0902 -1009 -1108 -1207 -1405 -1603 -1801 -2007 -2205 -2403 -2601 -2809 -3005 -3302 -3500 -3708 -4003 -

20999 - 0100 20999 - 0209 20999 - 0308 20999 - 0407 20999 - 0506 20999 - 1306 20999 - 1504 20999 - 1702 20999 - 1900 20999 - 2106 20999 - 2957 20999 - 2304 20999 - 2502 20999 - 2700 20999 - 2908 20999 - 3104 20999 - 3203 20999 - 3401 20999 - 3609 20999 - 3807 20999 - 3906 20999 - 4102 20999 - 4201 20999 - 4300 20999 - 4409 20999 - 4508 20999 - 4607 20999 - 4706 20999 - 4805 20999 - 4904 20999 - 5000 20999 - 5109 20999 - 5208 21000 - 0105 21000 - 0204 21000 - 0303 21000 - 0402 21000 - 0501 21000 - 0600 21000 - 0709 21000 - 0808

21001 - 0104 21001 - 0203 21001 - 0302 21001 - 0401 21001 - 0500 21001 - 0609 21001 - 0708 21001 - 0807 21001 - 0906 21001 - 1003 21001 - 1102 21001 - 1201 21001 - 1300 21001 - 1409 21001 - 1508 21001 - 1607 21001 - 1706 21001 - 1805

21002 - 0103 21002 - 0202 21002 - 0301

Bits for wood Router bits

No 21003

No 21004

No 21005

No 21006

No 21007

No 21008

"Luna". ATungsten carbide. Edge moulder: series 21003 has a bottom mounted bearing while series 21004 has a shank mounted bearing. Milling cutters marked with (3)= three fluted otherwise two fluted. Tongue and groove bits. series 21005 has a shank mounted bearing. On series 21006 the bearing can be mounted above, under or between the tongue and groove bits. Grooving bit and ball bearings not supplied for this series except art. no. 21006-0106, 0208 and 0307. These numbers are spindles only. Rebate bits: series 21007 and 21008 have bottom mounted bearings Extra ball bearings see 21072 page 0000. DiaBlade Rebate meter width depth mm mm mm Edge bits 21003, 21004 9.5 25 13 25 13 25 13(3) 25 13(3) 50 13(3) 50 19 32 19 13 19 25 19 25 12 15 Tongue and groove bits 21005, 21006 36 2 4 36 2 6 36 2 8.5 36 2 10 36 2.5 6 36 2.5 8.5 36 2.5 10 36 3 8.5 36 3 10 36 3.5 6 36 3.5 8.5 36 3.5 10 36 4 4 36 4 6 36 4 8.5 36 4 10 36 5 4 36 5 6 36 5 8.5 36 5 10 36 6 6 36 6 8.5 36 6 10 36 7 10 40 8 2 15 15 15 48 3 48 4 48 5 48 6 48 3+4+5+6 13 48 3+4+5+6 13 Rebate bits 21007, 21008 32 4 5 32 4 8 32 4 10 32 5 5 32 5 8 32 6 8 32 6 10 32 8 8 32 8 10 32 10 5 32 10 8 32 10 10 32 12 10 32 15 5 32 15 8 32 15 10 40 15 15

Total length mm

Ball bearing

Shaft diam. mm

Art. no.

66 63 65 65 88 88 70 45 67 67 57

9.5x4.8 mm 13x5 mm 13x5 mm 13x5 mm 13x5 mm 13x5 mm 19x8 mm 19x8 mm 19x8 mm 19x8 mm 12x8 mm

8 6 8 8 8 12 8 8 8 8 8

21003 - 0102 21003 - 0201 21003 - 0300 21003 - 0409 21003 - 0508 21003 - 0607 21003 - 0706 21004 - 0101 21004 - 0200 21004 - 0309 21004 - 0408

42 42 42 42 43 43 43 43 43 44 44 44 45 45 45 45 46 46 46 46 47 47 47 47 48 82 82 82 81 81

28x 8 mm 24x8 mm 19x8 mm 16x8 mm 24x8 mm 19x8 mm 16x8 mm 19x8 mm 16x8 mm 24x8 mm 19x8 mm 16x8 mm 28x8 mm 24x8 mm 19x8 mm 16x8 mm 28x8 mm 24x8 mm 19x8 mm 16x8 mm 24x8 mm 19x8 mm 16x8 mm 16x8 mm 16x8 mm 22x8 mm 22x8 mm

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 6 8 12 8 8 8 8 8 12

21005 - 0100 21005 - 0209 21005 - 0308 21005 - 0407 21005 - 0506 21005 - 0605 21005 - 0704 21005 - 0803 21005 - 0902 21005 - 1009 21005 - 1108 21005 - 1207 21005 - 1306 21005 - 1405 21005 - 1504 21005 - 1603 21005 - 1702 21005 - 1801 21005 - 1900 21005 - 2007 21005 - 2106 21005 - 2205 21005 - 2304 21005 - 2403 21005 - 2502 21006 - 0109 21006 - 0208 21006 - 0307 21006 - 0406 21006 - 0505 21006 - 0604 21006 - 0703 21006 - 0802 21006 - 0901

41 41 41 42 41 43 43 45 45 37 47 45 49 52 52 52 53

22x8 mm 16x8 mm 12x8 mm 22x8 mm 16x8 mm 16x8 mm 12x8 mm 16x8 mm 12x8 mm 22x8 mm 16x8 mm 12x8 mm 12x8 mm 22x8 mm 16x8 mm 12x8 mm 10x5 mm

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

21007 - 0108 21007 - 0207 21007 - 0306 21007 - 0405 21007 - 0504 21007 - 0603 21007 - 0702 21007 - 0801 21007 - 0900 21007 - 1007 21007 - 1106 21007 - 1205 21007 - 1304 21007 - 1403 21007 - 1502 21007 - 1601 21008 - 0107

7 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 7))

Bits for wood Router bits

1 No 21009

No 21010

No 21011

No 21012

No 21013

No 21014

"Luna". Hard metal. Round nose bit: med bearings as per. figure 1. Bit can be supplemented with smaller bearings to get contour 2. Size see table or 2. Moulding bit: series 210010 is without bearings and series: 21011 is with bearings. Chamfer bit: series 21013 marked with a * are bits without bearings, other bits in the series are with bearings. V-slot bits: without bearings. Extra bearings see 21072 page 0000. DiaBlademeter width mm mm Rounding bits 21009 16 8 18 8 19 9.5

Total length mm

Ball bearing standard

Ball bearing alt. ll

Shaft diam. mm

Art. no.

Chamferangle degrees

1.6 2.4 3

56 56 47

13x5 mm 13x5 mm 13x5 mm

10x5 mm 10x5 mm 10x5 mm

8 8 6

21009 - 0106 21009 - 0205 21009 - 0304

Radius

19.5 22.5 23

9.5 9.5 9.5

3.2 4.8 5

47 47 47

13x5 mm 13x5 mm 13x5 mm

10x5 mm 10x5 mm 10x5 mm

8 8 6

21009 - 0403 21009 - 0502 21009 - 0601

26 29 29

11 13 13

6.4 8 8

49 51 51

13x5 mm 13x5 mm 13x5 mm

10x5 mm 10x5 mm 10x5 mm

8 8 6

21009 - 0700 21009 - 0809 21009 - 0908

32 33 38.5

16 16 19

9.5 10 12.7

54 54 57

13x5 mm 13x5 mm 13x5 mm

10x5 mm 10x5 mm 10x5 mm

8 6 8

21009 - 1005 21009 - 1104 21009 - 1203

39 43

19 22

13 15

57 60

13x5 mm 13x5 mm

10x5 mm 10x5 mm

6 6

21009 - 1302 21009 - 1401

60 60 67 70 77 80

13x5 mm 13x5 mm 13x5 mm 13x5 mm 13x5 mm 13x5 mm

10x5 mm 10x5 mm 10x5 mm 10x5 mm 10x5 mm 10x5 mm

8 12 12 12 12 12

21009 - 1500 21009 - 1609 21009 - 1708 21009 - 1807 21009 - 1906 21009 - 2003

52 51 50 51 48 48 50 54 58 58 62 67 56 48 50 51 54

13x5 mm 13x5 mm 13x5 mm 13x5 mm 13x5 mm

8 8 8 8 8 8 8 8 12 8 12 12 8 8 8 8 8

21010 - 0103 21010 - 0202 21010 - 0301 21010 - 0400 21010 - 0509 21010 - 0608 21010 - 0707 21010 - 0806 21010 - 0905 21010 - 1002 21010 - 1101 21010 - 1200 21011 - 0102 21011 - 0201 21011 - 0300 21011 - 0409 21011 - 0508

45 45 45 45 45 8 15 15 30 30 45

50 55 55 60 69 58 57 58 55 55 51

13x5 mm 13x5 mm 13x5 mm 13x5 mm 13x5 mm 10x5 mm 10x5 mm 10x5 mm -

8 8 6 8 12 8 8 8 8 8 8

21012 - 0101 21012 - 0200 21012 - 0309 21012 - 0408 21012 - 0507 21013 - 0100 21013 - 0209 21013 - 0308 21013 - 0407 21013 - 0506 21013 - 0605

45 45 45 45

53 57 57 60

8 8 8 8

21014 - 0109 21014 - 0208 21014 - 0307 21014 - 0406

45 22 16 45 22 16 51 25 19 57 28 22 63 32 25 73 35 30 Moulding bits 21010, 21011 3.2 8 1.6 4.5 8 2.25 6 8 3 8 10 4 10 10 5 13 10 6.5 16 12 8 20 16 10 25 16 12.5 25 20 12.5 30 20 15 40 25 20 23 8 4.8 26 10 6.4 29 12 8 32 13 9.5 38 16 12.7 Chamfer bits 21012, 21013 25 11.6 36 16.5 36 16.5 48 22.5 56 26.7 15.5 20.5 17.5* 19 20.5 20 27* 17 30 17.5 21* 13 V-bits 21014 9.5 12.7 16 16 19 16 25 18 -

8 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 8))

Bits for wood Router bits

No 21015

No 21016

No 21019

No 21017

No 21020

No 21018

No 21021

No 21022

"Luna". Tungsten carbide. Lettering bits: series 21015 three-fluted made of tungsten carbide. Beading bits: series 21016 double fluted with bearing. Moulding bits: series 21017 double fluted. Channel bits: series 21018 bottom cutting without bearing. Dovetail bits: series 21019 without pilot, series 21020 with pilot for small chips and space for glue expansion. Finger joint bits: series 21021 with ball-bearing. Keyhole bits: series 21022 double fluted for hanging holes. Extra bearings see 21072 page 0000. Total length mm

Ball bearing

Shaft diam. mm

Art. no.

Phaseangle degree

21015 - 0108

Beading bits 21016 22 16 24 18 26 20 31 22 35 26 39 30

3 4 5 6 8 10

54 56 58 60 64 68

16x8 mm 16x8 mm 16x8 mm 19x8 mm 19x8 mm 19x8 mm

8 8 8 8 8 8

21016 - 0107 21016 - 0206 21016 - 0305 21016 - 0404 21016 - 0503 21016 - 0602

Moulding bits 21017 10 9 13 12 16 15 20 19

5 6.5 8 10

46 49 53 57

8 8 8 8

21017 - 0106 21017 - 0205 21017 - 0304 21017 - 0403

Channel bits 21018 22 16 32 16 32 16

4.5 5 5

58 58 58

8 8 12

21018 - 0105 21018 - 0204 21018 - 0303

Dovetail bits 21019, 21020 9.5 9.5 12.7 13 14.3 13 17.6 16

9 14 14 14

52 54 57 57

8 8 8 8

21019 - 0104 21019 - 0203 21020 - 0101 21020 - 0200

Finger joint bits 21021 35 38

19x6 mm

21021 - 0100

Keyhole bits 21022 9.5 10.5 12.7 12.5

52 52

8 8

21022 - 0109 21022 - 0208

DiaBlade meter width mm mm Lettering bit 21015 14 12

Radius

9 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 9))

Bits for wood Router bits

No 21023

No 21024

No 21030

No 21031

No 21035

No 21036

No 21025

No 21026

No 21032

No 21033

No 21037

No 21027

No 21029

No 21038

No 21039

No 21028

No 21034

No 21040

"Luna". Hard metal. Counter contour bits: series 21023, 21024, 21025, 21026 with ball-bearings for manufacturing cupboard doors, doors and panels. By switching the places of the groove and contour cutters both length and end contours can be made using the same bit. The router should be mounted on a milling table for the best result. Mirror bits: series 21027, 21028, 21029-0102 with top mounted ball-bearing. Series 21030, 21032, 21033, 21029-0201 without bearings for dĂŠcor routing on doors, mirrors, panels or boxes. Cornice bits: series 21034 horizontal cornice bit with ball-bearing. Series 21035, 21036,21037, 21037 vertical cornice bits for edge routing on e.g. mirror frames. The router should be mounted on a milling table for the best result. Glue joint bits: series 21039 and 21040 without bearings. Totall length mm

Ball bearing standard

Shaft diam. mm

Art. no.

73 78 73 78 73 73 78

22x8 mm 22x8 mm 22x8 mm 22x8 mm 22x8 mm 22x8 mm 22x8 mm

8 12 8 12 8 8 12

21023 - 0108 21023 - 0207 21024 - 0107 21024 - 0206 21025 - 0106 21026 - 0105 21026 - 0204

Mirror bits 21027, 21028, 21030, 21031, 21032, 21033, 21029 22 12.7 4+5.5 58 35 14.3 6.5+10.5 56 35 14.3 6.5+10.5 75 22 10 3.2+3.2 55 35 14 5+5 65 22 10 1.5+3 51 13 10 2.4+2.4 51 19 13 4+4 54

8x25 mm 8x25 mm 12x35 mm 8x22 mm 8x35 mm 28x8 mm -

8 8 12 8 8 8 8 8

21027 - 0104 21027 - 0203 21027 - 0302 21028 - 0103 21028 - 0202 21029 - 0102 21030 - 0109 21030 - 0208

47 49 50 48 51

8 8 8 8 8

21031 - 0108 21031 - 0207 21032 - 0107 21033 - 0106 21029 - 0201

53 58 80 84

10x5 mm 10x5 mm -

8 12 8 12

21034 - 0105 21034 - 0204 21035 - 0104 21035 - 0203

15 15 -

80 80 84 80 84

8 8 12 8 12

21036 - 0103 21037 - 0102 21037 - 0201 21038 - 0101 21038 - 0200

63 57

8 8

21039 - 0100 21040 - 0107

DiaBlade Radius Phasemeter width angle mm mm mm degree Counter contour bits 21023, 21024, 21025, 21026 41 17 5+5 41 17 5+5 41 17 5+5 41 17 5+5 43 18 5+5 43 18 3.5+3.5 43 18 3.5+3.5 -

13 19 26 9.5 22

9.5 11 12 8 10

2 3.2 6+6 4 1.5+3

Cornice bits 21034, 21035, 21036, 21037, 21038 60 15.5 16+16 66 16 16+16 26 42 3 15 26 42 3 15 26 42 25 26 42 26 42 26 42 19+19 26 42 19+19 Glue joint bits 21039, 21040 30 25 44 19 -

10 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 10))

Bits for wood Router bits

No 21041

No 21042

No 21047

No 21043

No 21049

No 21048

No 21063

No 21064

No 21044

No 21065

No 21045

No 20464

No 21066

No 21046

No 21061

No 21067

No 21068

No 21062

No 21069

"Luna". Hard metal. Contour bits: series 21041-21066 with bottom mounted bearing. With smaller bearings on series 21047-21049 another contour can be obtained see illustration and bearing option ll. Multi-contour bits: series 21067-21069 with bottom mounted bearing. Extra bearings see 21072 page 0000. DiaBlade Radius meter width mm mm mm Contour bits 21041-21066 38 16 3+9.5 29 13.5 4+4 38.5 18.5 6.4+6.4 33 11 2+3

Phaseangle degree

Totall length mm

Ball bearing standarad

Ball bearing alt. ll

shaft diam. mm

Art. no.

54 51 56 49

13x5 mm 13x5 mm 13x5 mm 10x5 mm

8 8 8 8

21041 - 0106 21042 - 0105 21042 - 0204 21043 - 0104

44 42 52 53 70

22 12.5 18 15 19

7+14 8+8 12+12 -

60 50 56 58 61

10x5 mm 10x5 mm 10x5 mm 13x5 mm 13x5 mm

8 8 8 8 12

21044 - 0103 21045 - 0102 21045 - 0201 21046 - 0101 21046 - 0200

35 42 30 36 42

15 19 13 17 19.5

4.8+4.8 6.4+6.4 3.2+3.2 4.8+4.8 6.4+6.4

53 57 51 55 57

13x5 mm 13x5 mm 13x5 mm 13x5 mm 13x5 mm

10x5 mm 10x5 mm 10x5 mm 10x5 mm 10x5 mm

8 8 8 8 8

21047 - 0100 21047 - 0209 21048 - 0109 21048 - 0208 21048 - 0307

32 41 19 27

14.5 18.5 25 41

4.8+4.8 4.5+4+4.5 -

52.5 50.5 63 83

13x5 mm 13x5 mm 10x5 mm 13x5 mm

10x5 mm -

8 8 8 12

21049 - 0108 20464 - 0106 21061 - 0101 21061 - 0200

59 69 63 62 60

19x5 mm 19x5 mm 10x5 mm 10x5 mm 13x5 mm

8 12 8 8 8

21062 - 0100 21063 - 0109 21064 - 0108 21065 - 0107 21066 - 0106

66 63 63 54

13x5 mm 16x5 mm 16x5 mm 16x5 mm

8 8 8 8

21067 - 0105 21068 - 0104 21068 - 0203 21069 - 0103

38 21 45 27 18 25 18 25 16 22 Multi-contour bits 21064-21069 40 18 6+4,5+3 22 25 3+3+3 22 25 3+3+3 22 16 3+3

11 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 11))

Bits for wood Miller sets

"Luna". Complete milling set in HM for manufacturing mirror doors and shutters. Contains 2 contra profile bits that allow efficient production without time-consuming adjustments. 1 vertical cornice bit for milling door mirrors. 1 glued joint miller for manufacturing solid wood door mirrors and one profile miller for decorative profiling of frame outer edges. All bits have a shaft diameter of 8 mm. Supplied in a wooden box.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of millers . . . . . . . . . . . . . . . . . . . . . . . . . . . Shank diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

No 20520

20520 ea. mm

-0108 5 8

"Luna". Milling set containing 12 bits with tungsten carbide cutters, of which 4 have ball-bearing support. Contains the following cutters: grooving bits 6, 8, 10, 12 and 16 mm, rebate bit 12.7 mm, V-groove bit, round nose bit radius 6.3 mm with ball bearings, edge bit with bearing guide, dovetail bit 12.3 mm, countor bit radius 4.5 mm with bearing guide, rebate bit 21.8 mm with bearing guide. Shank diameter 8 mm. Supplied in a wooden box.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shank diameter . . . . . . . . . . . . . . . . . . . . . . . . . . .

No 20946

20946 ea. mm

-0104 12 8

"Luna". Miller set with 6 rounding tools in tungsten carbide. Contains the following radii: 3.2, 4.8, 6.4, 8.0, 9.5, 12.7. Extra bearing mounts for décor countors supplied. Tefloncovered tool heads that prevent deposits. Supplied in a wooden box. Extra bearing guide - see page 0000.

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of routers. . . . . . . . . . . . . . . . . . . . . . . . . . . . Shank diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

No 21070

21070 ea. mm

-0100 6 8

"Luna". Handiwork set with 12 hard metal bits of which 6 are ball bearing controlled. Straight shank 8 mm. Supplied in a wooden box. Teflon-covered tool heads that prevent deposits. Contains: Slotting bit 20999-2007 6 mm, 20999-2403 10 mm, 20999-3500 20 mm. Chamfer bit 21012-0101 45° with bearing guide. Rebate bit 9.5×9.5 mm with bearing guide. Moulding bit 21010-0608 13 mm. V-bit 21014-0208 45°. Dovetail bit 14.8 mm. Moulding bit 21011-0102 radius 4.8 mm with bearing guide. Round nose bit 21009-0502 radius 4.8 mm with bearing guide. Edge bit 21003-0300 with bearing guide. Mirror bit 21028-0103 22 mm with bearing guide. Extra bearing guide - see page 0000.

No 21071

21071 ea. mm

-0109 12 8

Bearing guides No 21072 "Luna". Extra bearing guide.

Art. no. . . . . . . . . . . . . Diameter×hole . . . . . .

21072 mm

-0108 x 3⁄16, 12,7 x 4,8

-0207 9.5×4.8

-0306 10×5

-0405 12×8

-0504 13×5

-0603 14×8

-0702 16×5

Art. no. . . . . . . . . . . . . Diameter×hole . . . . . .

21072 mm

-0900 19×5

-1106 19×6

-1007 19×8

-1205 22×8

-1304 24×8

-1403 28×8

-1502 35×15

1⁄2

12 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 12))

-0801 16×8

Bits for wood Slot and shank end mill sets "Luna". Hard metal. Two blade set of slot and dowel tool (2 + 2 blade). The set consists of two bits which have adjustable slot width of 8-16 mm through associate spacer rings. When milling dowels, the bits are used and spaced with spacer rings for a dowel width of between 8-16 mm.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Outside diameter. . . . . . . . . . . . . . . . . . . . . Cutting width . . . . . . . . . . . . . . . . . . . . . . . . Max. dowel length . . . . . . . . . . . . . . . . . . . . Hole diameter . . . . . . . . . . . . . . . . . . . . . . . Max. speed. . . . . . . . . . . . . . . . . . . . . . . . . .

20698 mm mm mm mm rpm

-0104 160 8-16 45 30 8000

No 20698

-0203 200 8-16 65 30 7000

Slot cutters "Luna". Tungsten carbide with pilot. For groove milling, smaller channels, straight dovetailing (with several bit sand spacer rings) smaller dowels and slots.

Art. no.. . . . . . . . . . . . . . . Cutting width . . . . . . . . . . Outside diameter . . . . . . Hole diameter . . . . . . . . . Max. speed . . . . . . . . . . .

20686 mm mm mm rpm

-0108 4 120 30 10000

-0207 6 120 30 10000

-0306 8 120 30 10000

-0405 10 120 30 10000

-0504 12 120 30 10000

"Luna". Adjustable, double cutting miller with hard metal blade. Adjustable with spacer rings (2 + 2 blade).

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjustable cutting width . . . . . . . . . . . . . . . . . . . . . . . . . . . Outside diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hole diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20688 mm mm mm rpm

No 20686

No 20688

-0106 4-8 120 30 10000

"Luna". Hard metal. For groove milling, smaller channels, straight dovetailing (with several bit sand spacer rings) smaller dowels and slots.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cutting width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Outside diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . Hole diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20692 mm mm mm rpm

-0100 6 120 30 10000

No 20692

"Luna". Hard metal. For groove milling, smaller channels, straight dovetailing (with several bit sand spacer rings) smaller dowels and slots.

20693 mm mm mm rpm

-0109 6 120 30 10000

No 20693

"Luna". Hard metal. For groove milling, smaller channels, straight dovetailing (with several bit sand spacer rings) smaller dowels and slots.

20694 mm mm mm rpm

-0108 6 120 30 10000

No 20694

13 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 13))

Bits for wood Phase cutters "Luna". Double edged tungsten carbide mills with 45° angle. For bevelling straight and curved working objects. Can be combined with 90 mm copying ring.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cutting width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Outside diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . Hole diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

No 20685

20685 mm

-0109 15 45° 120 30 10000

mm mm rpm

Chamfering cutters "Luna". Double cutting hard metal blades. For truing straight and curved working objects. Can be combined with 80 or 90 mm copying ring . No 20689

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . Outside diameter . . . . . . . . . . . . . . . . . . . Hole diameter. . . . . . . . . . . . . . . . . . . . . . Max. speed . . . . . . . . . . . . . . . . . . . . . . . .

20689 mm mm mm rpm

-0105 5 100 30 12000

-0204 10 110 30 12000

Contra profile milling set "Luna". With hard metal edge. For hatch and door milling. Thanks to the design of this tool, you don’t need to use space rings. The tool can cut the entire extrusion. This means that pin length and slot depth are always correct without adjustment. The miller spindle does not need to be height adjusted when milling the pin section or length section. These dimensions are built into the tool.

No 20690

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Outside diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shaft length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tapp thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . For materialthickness . . . . . . . . . . . . . . . . . . . . . . . . . Hole diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20690 mm mm mm mm mm rpm

-0102 116 13 5 18.5-22 30 10000

Door milling set

No 20691 "Luna". With hard metal edge. Milling set for milling both friezes and contra profiles. The tool makes it possible to manufactures shutters and doors. When milling contra profiles for doors, an adjustable grooving cutter is also necessary for milling the groove for the dowel.

Art. ro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Outside diamter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Form cutter width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Slot cutter width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hole diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20691 mm mm mm mm rpm

-0101 160 17 5+5 30 8000

Door panel millers No 20687

"Luna". Double cutting hard metal miller. For milling friezes on door panels. Picture shows 0107

Picture shows 0206

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Outside diameter . . . . . . . . . . . . . . . . . . . . . Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. cutting length . . . . . . . . . . . . . . . . . . . . Incline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hole diameter . . . . . . . . . . . . . . . . . . . . . . . . Max. speed . . . . . . . . . . . . . . . . . . . . . . . . . .

14 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 14))

20687 mm mm mm mm rpm

-0107 160 8 55 5° 30 8000

-0206 160 55 5° 30 8000

Bits for wood Spacer rings "Luna". Used as spacers to obtain the right slot width for work with millers, milling combinations and slitters.

Art. no. . . . . . . . . . Diam.xhole . . . . . . Thickness . . . . . . .

20855 mm mm

-0103 58x30 0.1

-0202 58x30 0.2

-0301 58x30 0.5

-0400 58x30 1.0

No 20855

-0509 58x30 2.0

-0608 58x30 5.0

-0707 58x30 10.0

-0806 58x30 20.0

Profiling rings (template rings)

"Luna". Ball bearings. Complemented with exchangable profiling rings in various diameters. Intended for milling with templates. Also set of 5 profiling rings (and one ball bearing) in different sizes.

No 12002

Ball bearing . . . . . . . . Outside diameter. . . . . Inside diameter . . . . . .

12002 mm mm

-0102 55 30

Profiling rings . . . . . . Outside diameter. . . . . Thickness . . . . . . . . . . . Inside diameter . . . . . .

20851 -0305 mm 85 mm 12 mm 55

Profiling set, 5 . . . . . . Outside diameter. . . . .

20851 mm

-0107 85, 90,93,95,100

Profiling set, 5 . . . . . . Outside diameter. . . . .

20851 mm

-0206 105,110,115,120,125

-0404 90 12 55

-0503 93 12 55

-0602 95 12 55

-0701 100 12 55

-0800 105 12 55

-0909 110 12 55

-1006 115 12 55

-1105 120 12 55

-1204 125 12 55

Universal milling cutter "Luna". Universal milling cutter of light metal with two guide pins for easy and exact assembly of the profile steel. The cutter is designed for profile steel without deflector and is approved for mechanical feeding (MEC). The cutters can be stacked using the guide pins. Supplied with a pair of rebate cutters and hex-keys.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cutter diameter without/with steel . . . . . . . . . . . . . . . . . . . . . . . . Blade cutting width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hole diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20500 mm mm mm

-0102 88/93 40 30

No 20500

Universal milling blade sets

"Luna". Universal milling cutter of light metal with deflector. The form bit is fitted on the guide pin, this takes place with a pair of cutters and a pair of deflectors. The cutter is approved for manual feeding. The cutter set is supplied in storage box with the milling cutter including rebate bit, joint gluing bit, grooving mill 6 mm, tonguing bit 6 mm, round nose bit, cornice bit, counter-contour bit as well as deflector (bit no. 00, 16, 17, 22, 77, 97, 100).

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cutter diameter . . . . . . . . . . . . . . . . . . . . . . . . Blade cutter width . . . . . . . . . . . . . . . . . . . . . . Hole diameter . . . . . . . . . . . . . . . . . . . . . . . . . Suitable speed . . . . . . . . . . . . . . . . . . . . . . . .

20582 mm mm mm rpm

Cutter (MAN)

-0103 112 40 30 5800-9000

15 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 15))

Bits for wood Universal milling blade sets

Set 1S

112

100

124

"Luna". Profile tool steel of hardened carbon steel with a height of 40 mm and thickness of 4 mm. Steel blank profile 4x40 is an unground blank that permits a 40 mm high and 15 mm deep profiles. The deflector tool steel (S) is an approx 1 mm shallower steel pair that sit backward facing in the cutter (for the cutter marked MAN). This deflector tool steel reduces the risk of ripping and kickback. The cutter MAN is approved for manual feeding. All tool steel supplied in pairs. Profile

Profile

No 4x40 00 01 03 04 05 08 09 11

Spare profile steel Art. no. 20501 -0101 -0200 -0309 -0408 -0507 -0606 -0705 -0804 -0903

No 4x40S 00S 01S 03S 04S 05S 08S 09S 11S

Deflector steel Art. no. 20945 -0105 -0204 -0303 -0402 -0501 -0600 -0709 -0808 -0907

13 14 15 16 17 19 20 21 22 24 25 28 29

-1000 -1109 -1208 -1307 -1406 -1505 -1604 -1703 -1802 -1901 -2008 -2107 -2206

13S 14S 15S 16S 17S 19S 20S 21S 22S 24S 25S 28S 29S

-1004 -1103 -1202 -1301 -1400 -1509 -1608 -1707 -1806 -1905 -2002 -2101 -2200

-2305

31S

-2309

Profile

No 43 48 52 65 66 70

Spare profile steel Art. no. 20501 -2404 -2503 -2602 -2701 -2800 -2909

No 43S 48S 52S 65S 66S 70S

Deflector steel Art. no. 20945 -2408 -2507 -2606 -2705 -2804 -2903

74 75 76 77 80 81 82 87

-3006 -3105 -3204 -3303 -3402 -3501 -3600 -3709

74S 75S 76S 77S 80S 81S 82S 87S

-3000 -3109 -3208 -3307 -3406 -3505 -3604 -3703

96 97 98 99 100 112 124 Set 1

-3808 -3907 -4004 -4103 -4202 -4301 -4400 -4509

96S 97S 98S 99S 100S 112S 124S Set 1S

-3802 -3901 -4008 -4107 -4206 -4305 -4404 -4503

16 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 16))

Planer bits "Luna". High-speed steel or hard metal plane steel for direct fitting to stationary planes.

No 20913

Fits

Length

Width

Thickness

High-speed steel Art. no. Quantity steel 20913 /set -0103 2 -0202 2 -0301 3

Tungsten carbide Art. no. Quantity steel 20913 /set -2703 2 -2802 2 -2901 3

machine type Luna Z 40 Emco Star 3000 Luna Z 50

mm 155 180 210

mm 16 20 19

mm 3 2,5 3

Luna W 59, L38-250 Proofy BHM 260 Emco Woodworker MH26/Emco King

250 250 260

25 30 25

3 3 3

-0400 -0459 -0509

2 3 2

-3008 -3057 -3107

2 3 2

Emco 2000, B 20, 6231 K

260

-0509

-3107

Inca 343.190 Emco Woodworker MH30/B 30 Luna KRP-30 Luna K-30, Mini Max FS 30, Lab 30, Lab 300 N, CU 300K Proofy WHM 310 / Luna BPT 310 S Proofy BHM 310 Lab 260 Luna W 64, H 31, L 38/310 L 38/310

260 300 300 300

25 25 25 30

3 3 3 3

-0509 -0608 -0707 -0806

2 2 3 3

-3107 -3206 -3305 -3404

2 2 3 3

310 310 260 310 310

25 30 30 30 30

3 3 3 3 3

-0855 -0905 -1002 -1101 -1200

3 4 3 2 3

-3453 -3503 -3602 -3701 -3800

3 4 3 2 3

Luna KRP -35, Mini Max FS 350, Mini Max CU 350 K Luna KRP -40, Luna PH-40 Luna KRP-41 Luna W 69, L 39 Top Master FS 410 Mini Max FS41/CU 410 K Formula F 1 Luna RH/PH-50 Top Master FS 515 Formula SP 1 Top Master DT 530 Luna RH 53 Top Master AD/PS Luna PH 63

350

-1309

-3909

400 410 410 410 410 410 500 515 520 530 530 630 630

30 30 30 30 30 35 35 30 35 30 35 30 35

3 3 3 3 3 3 3 3 3 3 3 3 3

-1408 -1507 -1606 -1705 -1804 -1903 -2000 -2109 -2208 -2307 -2406 -2502 -2604

3 3 2 4 4 4 4 4 4 4 4 4 4

-4006 -4105 -4204 -4303 -4402 -4501 -4600 -4709 -4808 -4907 -5003 -5102 -5201

3 3 2 4 4 4 4 4 4 4 4 4 4

Reversible "Luna". Reversible hard metal plane steel designed for rapid attachment in the blade slot for most hand planes available on the market. Adaptors. If the plane has not previously been equipped with reversible plane steel, special adaptors are also required.

Reversible plane blades

Adaptor

Plane steel, reversible.

Atr. no. . . . . . . . . . . . . . . . Width . . . . . . . . . . . . . . . . . Depth. . . . . . . . . . . . . . . . . Thickness . . . . . . . . . . . . .

20917 mm mm mm

-0109 75.5 5.5 1.1

-0208 80.5 5.9 1.1

-0307 82.0 5.5 1.1

-0406 92.0 5.5 1.2

-0505 102.0 5.5 1.2

Adaptors

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20917

-1008 AD-82

17 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 17))

Jig saw blades Attachment A

Attachment C

"Luna". For electric jig saws. Supplied in SB-pack of 5 blades.

Application area

Manufactured of

Fast, coarse cut in wood, plywood, chipboard Fast, coarse cut in wood, plywood, chipboard Fine cut in wood, plywood, chipboard, plastic Fast, fine cut in wood, plywood chipboard, plastic Fast, fine cut in wood and plastic

Tool steel, ground set teeth Tool steel, ground set teeth Tool steel, ground teeth, tapered back Tool steel, ground teeth, tapered back Tool steel, ground teeth, tapered back Tool steel, ground teeth, tapered back

Fine cut in wood laminate, work tops, etc. with reversed toothing pattern to prevent chipping on top of the material Fine cut in metal section, sheet-metal with materialthickness max. 4 mm Fine cut in metal section, sheet-metal with material thickness 3-6 mm Wood with brads, plastic strip, aluminium. Soft metals with material thickness 5-10 mm Fine cut in metal section, sheet-metal with material thickness 3-6 mm Sandwich material Application area

Cutting length x Quantity Equal to Attachment type A for Bosch etc. Art. nr. width x teeth thickness 20590 mm per inch Bosch nr 75x8x1.3 6 T144D -0103 125x9x1.3

T344D

-0400

75x8x1.5

T101B

-0707

75x8x1.5

T101D

-0905

105x10x1.5

T301DL

-1002

75x8x1.5

T101BR

-1101

Bi-metal

50x8x1.0

T118AF

-1200

Bi-metal

50x8x1.0

T118BF

-1309

Bi-metal

75x8x1.0

T127DF

-1408

Bi-metall

100x8x1.0

T318BF

-1507

Manufactured of

Fine cut in wood laminate, work tops, etc. Tool steel, with reversed toothing pattern to prevent ground teeth, tapered back chipping on top of the material Fine cut in metal section, sheet-metal Bi-metal with material thickness max 4 mm

Cutting length x Quantity width x thickness mm 75x8x1.5

teeth

Attchment type C for Black&Decker etc Atr. no.

per inch 10

20590 -1804

50x8x1.0

-1903

Sets "Luna". Set with Jig saw blade.

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blades with attachement . . . . . . . . . . . . . . . . . . . . . . Quantity blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Nor 20973/Set A

20973 type per set

18 MAGENTA

YELLOW

-0209 C 10

A-attachemnt No. of Application area Cutting length x No. of Containing blades width x teeth Art. no. blade thickness mm per inch 20590-0103 3 Fast, coarse cut in wood, 75x8x1.3 6 plywood, chipboard 20590-0707 3 Fine cut in wood, plywood, 75x8x1.5 10 chipboard, plastic 20590-0608 2 Rip sawing in wood, 50x5x1.0 13 plywood, chipboard, plastic 20590-1200 2 Fine cut in metal section, sheet-metal 50x8x1.0 21 with material thickness max. 4 mm C-attachment No. of Application area Contains blades Art. no. blade 20590-1606 4 Coarse cut in wood, plywood, chipboard, plastic 20590-1705 4 Wood, plywood, chipboard, plastic 20590-1903 2 Fine cut in metal section, sheet-metal with material thickness max. 4 mm

CYAN

-0100 A 10

BLACK

STIBOINFO((LUNA KATALOG BODY 18))

Cutting length x No. of width x teeth thickness mm per inch 75x8x1.3 8 65x8x1.0

50x8x1.0

Band saw blades For wood "Luna". Thin. Extra quality with profile-ground teeth. Hardened tooth points. Special profile for work in soft metals, particle boards, plastic, laminate, beech, oak and other hard wood species. From toughened band steel. Supplied directional and ready joined. The setting is of the left-right type. Length

Series

mm 1350 1430 1500 1780 1815 1840 1870 2120 2225 2240 2296

61P 81P 62P 64P 65P 70P -

6 mm wide x 0.36 mm 4 mm tooth pitch Art. no. 20957 -0100 -0209 -0308 -0407 -0506 -0605 -0704 -0803 -0902 -1009 -1108

No 20957 10 mm wide x0.36 mm 4 mm tooth pitch Art. no. 20957 -1207 -1306 -1405 -1504 -1603 -1702 -1801 -1900 -2007 -2106 -2205

"Luna". Hardened tooth points bandsaw blade for solid wood yet also for lighter work in soft metals, chipboard, plastic, laminate, beech, oak and other hard woods. Supplied aligned, ready joined and set. Other dimensions available on request. NOTE: minimum quantity 3 per dim. Bandsaw blades with bigger width see page 0000. Length

Thickness

Tooth pitch

mm 1350 1400 1430 1500 1500 1510 1650 1710 1815 1870 1870 1900 2000 2100 2120 2170 2121 2190 2190 2240 2296 2360 2470 2490 2650 2650

mm 0.36 0.36 0.65 0.36 0.65 0.36 0.36 0.36 0.36 0.36 0.65 0.36 0.36 0.36 0.36 0.36 0.65 0.65 0.63 0.63 0.36 0.63 0.63 0.63 0.36 0.65

2810 2950 3090 3150 3350 3360 3410 3500 3634 3650 3720 3900 4000 4100 4240 4590 4800 5020 5700

0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63 0.63

16 mm wide x0.36 mm 4 mm tooth pitch Art. no. 20957 -2254 -2304 -2403 -2502 -2601 -2700 -2809 -2908 -3005

Nr 20998

4 mm wide

6 mm wide

10 mm wide

mm 4.0 4.0 1.8 4.0 1.8 4.0 4.0 4.0 4.0 4.0 1.8 4.0 4.0 4.0 4.0 4.0 1.8 1.8 6.0 6.0 4.0 6.0 6.0 6.0 4.0 1.8

Art. no. 20998 -0101 -0127 -0150 -0176 -0200 -0226

Art. no. 20998 -0259 -0275 -0309 -0325 -0358 -0374 -0408 -0424 -0457 -0473 -0507 -0523 -0556 -0572 -0606 -0622 -0655 -0671 -0705 -0721 -

Art. no. 20998 -1174 -1208 -1224 -1257 -1273 -1307 -1323 -1356 -1372 -1406 -1422 -1455 -1471 -1505 -1521 -1554 -1570 -1604 -1620 -1653 -

6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0

-0754 -0770 -0804 -0820 -0853 -0879 -0903 -0911 -0929 -0952 -0978 -1000 -1026 -1059 -1075 -1109 -1125 -1158 -

-1679 -1703 -1729 -1752 -1778 -1802 -1828 -1836 -1851 -1877 -1901 -1927 -1950 -1976 -2008 -2024 -2057 -2073 -2107

19 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 19))

Band saw blades For wood "Luna". Hardened tooth points bandsaw blade for solid wood yet also for lighter work in soft metals, chipboard, plastic, laminate, beech, oak and other hard woods. Supplied aligned, ready joined and set. Other dimensions available on request. NOTE: minimum quantity 3 per dim.

No 20998 Length

Thickness

Tooth pitch

16 mm wide

19 mm wide

25 mm wide

mm 1350 1500 1650 1710 1870 1900 2000 2100 2120 2170 2190 2240 2296 2360 2470 2490 2650 2650

mm 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.63 0.81 0.36 0.81 0.81 0.81 0.81 0.36

mm 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 4.0 6.0 6.0 6.0 6.0 4.0

Art. no. 20998 -2123 -2156 -2172 -2206 -2222 -2255 -2271 -2305 -2321 -2354 -2370 -2404 -2420 -2453 -2479 -2503 -2529

Art. no. 20998 -3006 -

Art. no. 20998 -

2810 2950 3090 3150 3350 3360 3410 3634 3500 3650 3720 3900 4000 4100 4240 4590 4800 5020 5700

0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81

6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0

-2552 -2578 -2602 -2628 -2651 -2677 -2701 -2727 -2735 -2750 -2776 -2800 -2826 -2859 -2875 -2909 -2925 -2958 -2974

-3022 -3055 -3063 -3071 -3105 -3121 -3154 -3170 -3204 -3221 -3253 -3279 -3303

-3329 -3352 -

"Luna". Hardened tooth points bandsaw blade for bandsaws and portable sawmill.

No 20864 Length

Thickness

Tooth pitch

mm 2760 3280 4000 4100 4250 4520 4590 4760 5020 5030 5070 5700

mm 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06

mm 19 22 22 22 22 22 22 22 22 22 25 25

31 mm wide

38 mm wide

51 mm wide

Art. no. 20864 -0102 -0128 -0144 -0169 -0185

Art. no. 20864 -0201 -0300 -0409 -0508 -0607 -0706 -

Art. no. 20864 -0805 -

20 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 20))

Circular saw blades Hard metal saw blade portable circular, stationary and construction saws

"Luna". Circular saw blades with tungsten-carbide teeth for cutting and splitting of all types of wood and for sawing in different forms of board. Manufactured with hardened main blade and high demands on quality for professional use. The blade can be reground several times. Diam.

No 20577

Art. no.

Quantity teeth ea. 16 16 16 18 18

Cut width/ blade life mm 2.4/1.6 2.4/1.6 2.4/1.6 2.4/1.6 2.4/1.6

Frontangle

Tooth grinding

mm 125 130 140 152 152

Holes resp. insert mm 20/16/13 20/16/13 20/16/13 20/16/15/13 30

15 15 15 15 15

Alternately Alternately Alternately Alternately Alternately

20577 -0100 -0209 -0308 -0407 -0506

155 160 160 165 165 165 165

20/16/12/7 20/16 20/16 30/20 30/20 16 16

18 18 30 18 30 18 30

2.4/1.6 2.4/1.6 2.4/1.6 2.4/1.6 2.4/1.6 2.4/1.6 2.4/1.6

15 15 10 15 10 15 10

Alternately Alternately Alternately Alternately Alternately Alternately Alternately

-0605 -0704 -0803 -0902 -1009 -1108 -1207

170 180 180 184 184 185 190

30 30/20 30/20 30/20/16 16 30/20/16 20/16

20 24 40 24 40 40 24

2.4/1.6 2.4/1.6 2.4/1.6 2.4/1.6 2.4/1.6 2.4/1.6 2.4/1.6

15 15 10 15 10 10 15

Alternately Alternately Alternately Alternately Alternately Alternately Alternately

-1306 -1405 -1504 -1603 -1702 -1801 -1900

190 190 200 200 204

30/20/16 30/20/16 30/25/15 30/25/15 30

24 40 24 40 24

2.4/1.6 2.4/1.6 2.6/1.8 2.6/1.8 2.6/1.7

15 10 15 10 22

Alternately Alternately Alternately Alternately Alternately

-2007 -2106 -2205 -2304 -2403

210 216 216 235 250 250 254 250

35/30/25/20 30 30 35/30/25 30/20 30/20 30/25/20 30/20

24 50 24 40 24 40 40 60

2.6/1.8 2.8/2.0 2.8/2.0 2.8/2.0 2.8/2.0 2.8/2.0 2.8/2.0 2.8/2.0

15 -5 10 10 15 10 10 10

Alternately Trapets Alternately Alternately Alternately Alternately Alternately Alternately

-2502 -2601 -2700 -2809 -2908 -3005 -3104 -3203

300 300 300 300 305 315 315 350 350 350 400 400 400

30 30 30 30 30 30 30 30 30 30 30 30 30

30 36 48 60 60 30 48 36 42 56 40 48 64

3.2/2.2 2.8/1.9 2.8/1.9 2.8/1.9 2.8/1.9 3.2/2.2 2.8/1.9 3.2/2.5 3.2/2.2 3.2/2.2 3.2/2.5 3.2/2.2 3.2/2.2

22 22 22 22 22 22 22 22 22 22 22 22 22

Alternately Alternately Alternately Alternately Alternately Alternately Alternately Alternately Alternately Alternately Alternately Alternately Alternately

-3302 -3401 -3500 -3609 -3708 -3807 -3906 -4003 -4102 -4201 -4300 -4409 -4508

Cross cutting blades "Luna". Circular saw blades with tungsten carbide teeth. For cross cutting saws. Diam. mm 400 500 600 650 700

Holes resp. insert mm 30 30 30 30 30/35

Quantity teeth ea. 36 44 52 56 60

Cut width/ blade life mm 3.5/2.5 4.0/2.8 4.0/3.0 4.0/3.0 4.0/3.0

Tooth grinding Alternately Alternately Alternately Alternately Alternately

Art. no. 20577 -4607 -4706 -4805 -4904 -5000

No 20577

Insert rings "Luna". From metal. For reducing the hole diameter of circular saw blades. Allows greater flexibility – same circular saw blade fits several circular saws.

Art. no. . . . 20743 -0109 -0208 -0307 -0406 -0505 -0604 -0703 -0802 Dimension. mm 20×15 20×16 30×15 30×16 30×20 30×22.2 30×25 30×25.4 Thickness . mm 1.4 1.4 1.4 1.9 1.9 1.5 1.9 1.5

No 20743

21 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 21))

Drill chuck mandrels "Luna". With tapered attachment according to SMS 711. For clamping of drill chucks with mounting hole according to SS 710 and DIN 239 in machines with MT attachment. Fully hardened and ground.

No 20506 Arbor tap designation B 10 B 12 B 16

MT 1 Art. no.

B 18 B 22 B 24

20506 -0106 -0205 -0304

Total length mm 86 89 97

-0403 -

116 -

MT 2 Art. no.

20506 -0502 -0601 -0700

Total length mm 102 105 109

-0809 -0908 -

116 127 -

MT 3 Art. no.

20506 -1005 -1104

Total length mm 129 133

-1203 -1302 -1708

140 146 167

MT 4 Art. no.

20506 -1401

Total length mm 161

-1500 -1609 -1807

168 175 186

"Luna". With cylindrical attachment. For clamping of drill chucks with mounting hole according to SS 710 and DIN 238 in milling machines and automatic machines. Clamping is done in a milling chuck or clamping sleeve. Fully hardened and ground.

No 20912

Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Arbor tap designation. . . . . . . . . . . . . . . . . Shaft diameter×längd . . . . . . . . . . . . . . . .

20912 mm

-0104 B 10 10×50

-0203 B 12 10×50

-0302 B 16 16×50

-0401 B 16 20×60

-0500 B 18 16×70

"Luna". For setting up of drill chucks with tapered mounting holes in machines with machine taper.

No 20890

Art. no.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine attachment according to . . . . . . . . . . . . . . . . . . . . Size of attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Arbor pin designation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20890

-0100 DIN 2080 ISO 30 B 16

-0209 DIN 2080 ISO 40 B 16

-0308 DIN 2080 ISO 50 B 16

Chuck collets "Luna". Cylindrical with internal Morse taper. Precision manufactured. Fully hardened. Ground internally and externally.

Art. no. . . . . . . . . . . . . . . . Ext. diameter. . . . . . . . . . . Int. taper . . . . . . . . . . . . . . Overall length . . . . . . . . . .

No 20916

20916 mm MT mm

-0100 20 1 75

-0407 32 3 120

Art. no. . . . . . . . . . . . . . . . . . . . External/internal taper . . . . . . . For drills . . . . . . . . . . . . . . . . . . .

20504 No mm

-0108 2/1 5-14

-0207 3/1 5-14

-0306 4/1 5-14

-0405 3/2 14.25-23

-0504 4/2 14.25-23

Art. no. . . . . . . . . . . . . . . . . . . . External/internal taper . . . . . . . For drills . . . . . . . . . . . . . . . . . . .

20504 No mm

-0702 4/3 23.25-31.5

-0801 5/3 23.25-31.5

-0900 5/4 32-50

-1007 6/4 32-50

-1106 6/5 51-75

22 MAGENTA

YELLOW

-0605 40 4 152

"Luna". Precision manufactured. Fully hardened. Ground internally and externally. Morse taper.

No 20504

CYAN

-0209 25 2 100

BLACK

STIBOINFO((LUNA KATALOG BODY 22))

-0603 5/2 14.25-23

Chuck collets Extension sleeves "Luna". Precision manufactured. Fully hardened. Ground internally and externally. Morse taper.

No 20505

Art. no. . . . . . . . . . . . . . . . . . . . . . External/internal taper . . . . . . . . For drills . . . . . . . . . . . . . . . . . . . . Overall length . . . . . . . . . . . . . . . .

20505 No mm mm

-0107 1/1 5-14 145

-0206 2/1 5-14 160

-0305 3/1 5-14 175

-0404 1/2 14.25-23 160

-0503 2/2 14.25-23 175

Art. no. . . . . . . . . . . . . . . . . . . . . . External/internal taper . . . . . . . . For drills . . . . . . . . . . . . . . . . . . . . Overall length . . . . . . . . . . . . . . . .

20505 No mm mm

-0602 3/2 14.25-23 194

-0701 4/2 14.25-23 215

-0800 2/3 23.25-31.5 196

-0909 3/3 23.25-31.5 215

-1006 4/3 23.25-31.5 240

Art. no. . . . . . . . . . . . . . . . . . . . . . External/internal taper . . . . . . . . For drills . . . . . . . . . . . . . . . . . . . . Overall length . . . . . . . . . . . . . . . .

20505 No mm mm

-1105 3/4 32-50 240

-1204 4/4 32-50 265

-1303 5/4 32-50 300

-1402 4/5 51-75 300

-1501 5/5 51-75 335

Reducing sleeves "Luna". Sleeve that reduces from external machine taper to internal MT attachment. Tool holder according to DIN 2080.

Art. no. . . . . . . . . . . . . . . . . . . Machine attachment . . . . . . . Int. taper . . . . . . . . . . . . . . . . .

20943 ISO

-0107 30 MT 2

-0206 30 MT 3

-0305 40 MT 2

-0404 40 MT 3

-0503 40 MT 4

No 20943

Milling chucks "Luna". ER insert chuck. For tools such as shank-end mill, twist drill and screw cutting tools with cylindrical shaft (also with carrier plane). With straight shank. For attachment in other milling chuck. For machining operations that require greater clearance or less sleeve diameter. Double slotted ER sleeves, which combine flexibility with a wide clamping range without forgoing high precision and large clamping force. Separate insert chucks Art. no. . . . . . . . . . . . . . . . . . . . ER-dim. . . . . . . . . . . . . . . . . . . . Straight shank . . . . . . . . . . . . . Attachment length . . . . . . . . . . Tension area. . . . . . . . . . . . . . .

20902 mm mm mm

-0205 16 20 100 1.0-10.0

Sets (insert chuck with clamping sleeves) Art. no. . . . . . . . . . . . . . . . . . . 20902 -1005 ER-dim. . . . . . . . . . . . . . . . . . . 16 Straight shank . . . . . . . . . . . . mm 20 Attachment length . . . . . . . . . mm 100 Tension area . . . . . . . . . . . . . mm 2.0-10.0 With clamping sleeves . . . . . mm 3, 4, 5, 6, 7, 8, 9, 10 Number of sleeves . . . . . . . . qty 8

-0403 20 20 100 2.0-13.0 -1104 20 20 100 3.0-13.0 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 10

No 20902/Insert chuck

-0502 32 25 80 3.0-20.0 -1203 32 25 80 5.0-20.0 6, 8, 10, 12, 16, 20 6

No 20902/Set

"Luna". ER insert chuck Mini. Corresponds to version no 20902, extended insert chuck with slim design for milling and drilling operations requiring greater access.

Milling chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ER-dim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Straight shank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tension area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Head dim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Attachment length (overall). . . . . . . . . . . . . . . . . . . . . . . . . . .

20914 mm mm mm mm

-0102 16 20 1-10 22 160

Separate key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20914

-0300

Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ER-dim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Straight shank . . . . . . . . . . . . . . . . . . . . . . . . . Attachment length . . . . . . . . . . . . . . . . . . . . . . Tensioning area. . . . . . . . . . . . . . . . . . . . . . . . With clamping sleeves . . . . . . . . . . . . . . . . . .

20914 mm mm mm mm mm

Number of sleeves . . . . . . . . . . . . . . . . . . . . .

qty

No 20914

-0201 16 20 160 1.0-10.0 3.0-10.0 (1.0 mm steps) 8

23 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 23))

Milling chucks "Luna". ER milling chuck. For tools such as shank-end mill, twist drill and screw cutting tools with cylindrical shaft (also with carrier plane). With Morse taper. For double slotted ER sleeves, which combine flexibility with a wide clamping range without forgoing high precision and large clamping force. ER 25 supplied in a wooden box, others in plastic case.

No 20903/Milling chuck

Separate milling chucks Art. no. . . . . . . . . . . . . . . . ER-dim. . . . . . . . . . . . . . . . Machine drive . . . . . . . . . . Draw rod thread . . . . . . . . Tensioning area . . . . . . . .

20903 MT mm

Sets (milling chuck and sleeves) Art. no. . . . . . . . . . . . . . . . . . . 20903 ER-dim. . . . . . . . . . . . . . . . . . . Machine drive. . . . . . . . . . . . . MT Draw rod thread . . . . . . . . . . . Tensioning area. . . . . . . . . . . mm With clamping sleeves . . . . . mm

No 20903/Set

No. of sleeves . . . . . . . . . . . .

Milling chuck

-0105 20 2 M 10×1.5 2.0-13.0 -1004 20 2 M 10×1.5 4.0-13.0 6, 8, 10, 12, 164, 5, 6, 7, 8, 9, 10, 11, 12, 13 10

-0303 32 4 M 16×2.0 3.0-20.0

-1103 32 3 M 12×1.75 5.0-20.0 6, 8, 10, 12, 16, 20

-1202 32 4 M 16×2.0 5.0-20.0 6, 8, 10, 12, 16, 20

"Luna". ER milling chuck. For tools of the types end mill, twist drills and threading tools with a straight shank (also with flats). With machine taper. For double slotted ER sleeves, which combine flexibility with a wide clamping range without forgoing high precision and large clamping force. The sets contain collets in increments 1.0 mm (means that collet dimension 6 has the clamping range ∅ 6-5 mm, 8 has a clamping range ∅ 8-7 etc). The sets also include a hook spanner.

No 20904/Set

Separate milling chucks Art. no. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ER-dim.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Machine bracket . . . . . . . . . . . . . . . . . . . . . . Collet dim./Clamping range . . . . . . . . . . . . .

e.a.

-0204 32 3 M 12×1.75 3.0-20.0

20904 DIN 2080 ISO mm

Sets (milling chuck and clamping sleeves) Art. no.. . . . . . . . . . . . 20904 -3405 ER-dim. . . . . . . . . . . . 32 Machine bracket . . . . DIN 2080 ISO 30 Collet dim. . . . . . . . . . mm 4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20 Number of collets . . . e.a. 11

-0203 32 30 3.0-20.0

-0302 40 30 4.0-26.0

-3603 40 30 4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25, 26 15

-0906 32 40 3.0-20.0

-3900 32 40 4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20 11

-1003 40 40 4.0-26.0

-4106 40 40 4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25, 26 15

Locking nuts "Luna". ER lock and top nut.

No 20905/Type A No 20905/Type B

Art. no. . . . . . . . . . . . ER-dim. . . . . . . . . . . . Thread size. . . . . . . . Nut . . . . . . . . . . . . . . .

20905 M type

-0103 16 22×1.5 A

-0202 20 25×1.5 A

-0400 32 40×1.5 B

-0509 40 50×1.5 B

-0201 20 A

-0409 32 B

-0508 40 B

Milling chuck keys

No 20906/Type A "Luna". ER keys. Suit Luna ER lock and top nut.

No 20906/Type B

Art. no. . . . . . . . . ER-dim. . . . . . . . . Key . . . . . . . . . . . .

20906 type

-0102 16 A

24 CYAN

MAGENTA

YELLOW

BLACK

STIBOINFO((LUNA KATALOG BODY 24))

Clamping sleeves "Luna". Loose ER clamping sleeves. Double slotted, which means that the sleeves combine flexibility with a wide clamping range without forgoing high precision and large clamping force. Type DIN 6499.

Art. no. . . . . . . . . . 20899 -0101 ER-dim. . . . . . . . . . 16 Nom. diam. . . . . . . mm 1 Clamping range . . mm 1.0-0.5

-0200 16 2 2.0-1.0

Art. no. . . . . . . . . . . . . . . ER-dim. . . . . . . . . . . . . . . Nom.diam.. . . . . . . . . . . . Clamping range . . . . . . .

20899

-1109 20 2 2.0-1.0

-1208 20 3 3.0-2.0

-1307 20 4 4.0-3.0

-1406 20 5 5.0-4.0

-1505 20 6 6.0-5.0

-1604 20 7 7.0-6.0

Art. no. . . . . . . . . . . . . . . ER-dim. . . . . . . . . . . . . . . Nom.diam.. . . . . . . . . . . . Clamping range . . . . . . .

20899

-1703 20 8 8.0-7.0

-1802 20 9 9.0-8.0

-1901 20 10 10.0-9.0

-2008 20 11 11.0-10.0

-2107 20 12 12.0-11.0

-2206 20 13 13.0-12.0

mm mm