NOTES GENERAL: 1. All dimensions to be checked on site before commencement of any work. Use figured dimensions only. Any discripancies should be reported to the Architect immediately. 2. All dimensions are in milimetres unless otherwise specified as interior room dimensions in metres. CIVIL WORKS: 1. All soils under slabs and around external fountations to be treated for termite control. 2. All soils on cut emberkments to be stabilised. Slope not to exceed the natural angleof repose. 3. All slabs at ground level to be poured over 1000 gauge polythene sheeting on 50mm stone blinding on hardcore. STRUCTURAL WORKS: 1. All black cotton soils to be removed from all building plinths. All buildings to be clear of black cotton soil to a distance of 3m. 2. All basement columns to be provided with angle iron protection 1500mm high. 3. All paved surfaces to be clear of black cotton soil to a distance of 500mm outside the edge of the surface. 4. Refer to structural Engineers details for all r.c works. 5. Fountation depth to be determined on site to structural Engineer's approval. 6. All walls less than 200mm thick to be reinforced with hoop irons at every alternate course. 7. All adjacent r.c work and masonry walls to be tied with strap irons at every course.
Umbrella' fire extinguishing sprinkler system. Pipe sizes to M.E's detail.
+0
MECHANICAL WORKS: 1. All sanitry fittings, doors, windows and lifts to schedules. 2. All plumping and drainage to comply with city council's specifications. 3. All service ducts to be accessible from every floor. 4. SVP denotes soil vent pipe to be provided at the head of drainage.
GROUND FLOOR
LEGEND. 400x600mm R.C column with a 1500mm high iron angle protection. see Detail L (21) 001
12mm thick plaster on protective masonry walling finished with 3_coats of water-proof paint to approval.
2650
3-coats 20mm thick mastic asphalt tanking applied to rough concrete face to approval.
WALL FINISH.
CEILING FINISH.
[W-01] - WINDOW NUMBER.
200mm thick r.c walling to S.E's details.
150mm thick r.c loading slab ribbed to approval. Reinforcement layout to S.E's details.
50x50mm mastic angle fillet .
555
3-coats of 30mm thick horizontal Mastic asphalt applied over concrete base to approval.
SKIRTING FINISH.
[D-01] - DOOR NUMBER.
30mm thick cement/sand grout.
50mm thick protective screed.
150mm thick masonry protective walling finished with 12mm thick plaster and 3-coats water-proofing paint to approval.
FLOOR FINISH.
Reinforced concrete slab to S.E's details.
75mm thick coarse clinker blinding.
150 200 30 20
-2500
LOWER BASEMENT
1: FLOOR FINISHES. 1. Ribbed concrete. 2. Tampered monolithic concrete. 3. 40mm thick steel float cement screed. 4. 250x250x10mm quarry tiles on cement grout. 5. 250x250x10mm granito flooring tiles on cement grout. 6. 300x300x10mm acid resistant ceramic floor tiles. 7. 300x300x10mm non-slip ceramic floor tiles. 8. 50mm thick chisel dressed stone. 9. 15mm thick polished random cut mazeras. 10. 150x50x10mm mnazi timber blocks. 1: SKIRTING FINISHES. 1. 150mm high 25mm thick painted cement screed. 2. 250x150x10mm quarry tiles. 3. 250x150x10mm granito skirting tiles. 4. 250x150x10mm ceramic skirting tiles. 5. 150x25mm hardwood strips. 6. 150mm high half-sawn rosewood poles. 7. 250x150x15mm mazeras skirting tile. 1: WALL FINISHES. 1. 3 coats water proofing textured paint. 2. 3 coats eggshell emulsion paint. 3. 12mm thick steel float plaster. 4. Half sawn rosewood poles to 1050mm height. 5. 250x150x10mm glazed ceramic wall tiles to 1800mm height,silk vinyl emulsion paint above. 6. 3 coats matt vinyl emulsion paint. 1: CIELING FINISHES. 1. Painted roughcast concrete. 2. Suspended softwood timber crate ceiling. 3. Half-sawn rosewood poles. 4. Fissured minaboard suspended ceiling. 5. Painted softboard on timber frame.
PROJECT TITLE: Mixed Use Urban Development. DRAWING TITLE: DRAWING NO: SCALE:
Tanking Detail. L[21]01. 1:20
DRAWN BY: OMOLLO STEPHEN. CHECKED BY: