EDBOX by STERLING DO BRASIL

DUAL System 2.4GHz / 5.8GHz

Audio communication

» » »

Two frequency bands in one device for easy switch-over in case of interference Separate connectors for different RF outputs Robust TNC sockets for large outdoor antennas Different kinds of modulation for optimised transmission quality and range

» » »

8 channel 446MHz command system with 5 pole XLR for headset talk back function volume control remote talking button via HIROSE

Video and Audio interfaces

OLED Display

» » » » »

Composite video input SD-SDI as option (HD-SDI on request) Balanced audio inputs with input transformer Switchable for LINE or MIC level sensitivity 6dBu overdrive depot for professional sound quality also for digital transmission SP-DIF input option

V-Mount connector » » »

Easy connection with camera Supply of camera and transmitter via battery Supply of transmitter and external devices via HIROSE

“ lower than 90 ms latency between transmitter and receiver”

multi functional display with control function for transmitter and battery status control 3 button menu navigation for easy and quick set up

LANC and Tally Light » »

Tally Light output via HIROSE RS232 interface for individual applications

EDBoX Solutions c/o KIRNexus GmbH • Franz-Xaver-Heilig Str. 7 • 88630 Pfullendorf / Germany • Fon +49 (0)7552 92280-0 • Fax+49 (0)7552 92280-32 • info@edbox.tv • www.edbox.tv

» » » » The state-of-the-art video and audio transmission system uses multicarrier modulation schemes to ensure a proper and disturbance-free transmission of digital data. The signals will be distributed among a large number of close spaced orthogonal sub-carriers. That is why the system is relatively immune to multipath distortion and signal fading and therefore ideal in urban environments, where a lot of signal reflections occur. These reflections do not reach the receiver all at the same time, what caused considerable problems with wireless systems in the past. COFDM receivers evaluate and use all incoming signals for demodulation, so that phenomena like ghost pictures will be avoided reliably. A direct line-of-sight between transmitter and receiver is no longer required. One of the major benefits provided by digital video transmission systems is the integrated error correction. It ensures a solid and reliable video quality and protects against dropouts and identikits. The increased use of wireless networks in private, commercial and industrial applications leads to an increase of interference and over crossing problems with analogue systems. Especially for applications where an undisturbed video transmission was impossible because of difficult environmental conditions, digital wireless systems will play an important role in future. Diversity receivers improve the transmission even more, for instance in studios, stadiums or exhibition halls. Most important features of the system » Development, production and customisation at EDBoX » Three available frequency ranges for mobile applications: 1.4GHz, 2.3GHz and 5.8GHz » Two frequency ranges in one device (DUAL option) with simple switch-over function via menu, 2.3GHz and 5.8GHz » Systems for use in licence free ISM bands 2.4GHz and 5.8GHz » Many interfaces for maximum compatibility, modifications for your terminal equipment on request

» » »

Digital 168bit encryption option (triple DES and AES tech nologies) All video standards PAL / NTSC / SECAM selectable video interfaces Useful functions like freeze frame, level control, adjustable transmission power Easy operation via menu for quick and secure setup Different housing versions for indoor-, outdoor- or mobile applications Optimised solutions for the broadcast market

EDBoX1200tx - the multifunctional video transmitter you were waiting for to close the gap between elaborate cable installations and expensive wireless cameras. Competitive price, compact and robust housings, many functional interfaces and its transcendent signal transmission reliability make the EDBoX1200tx your ideal solution for any live performance. No licence is required to operate the transmitter, which makes the DUAL transmitter suitable for almost all scenes of shooting. Here you can benefit from the helpful interfaces which enable you to adjust the transmitter quickly and easily depending on the local conditions and requirements. All parameters are freely adjustable at any time, this saves precious working time and effort and is therefore a big advantage compared to complicated conventional wireless cameras. Power supply is no problem anymore. The transmitter can be fed via battery V-mount or any other mobile power source available. Possible applications » Live events like sports competitions » Sets in studios » Exhibition events » Live reporting » Shows and public viewing » Set monitoring and direction

EDBoX Solutions c/o KIRNexus GmbH • Franz-Xaver-Heilig Str. 7 • 88630 Pfullendorf / Germany • Fon +49 (0)7552 92280-0 • Fax+49 (0)7552 92280-32 • info@edbox.tv • www.edbox.tv

Technical data

Optional enhancements (on request) Delay 40ms Compression MPEG 4 (H264, HD-SDI) Frequency band Band 3: 1.2GHz - 1.5GHz Band width 1,25MHz, 2,5MHz Data transmission (optional) Frequency band 868MHz Transmission power 25mW HF connector SMA Interfaces TALLY light

RS 232 LANC Command transmission (optional) Frequency band 446MHz Transmission power 100mW HF connector SMA Headset 5-pol. XLR fm

Dimensions mm

Power supply 13,2 V (via battery V-Mount) Power consumption 1 Ampere Transmission ETSI EN 300 744 Frequency band Band1: 2,2GHz - 2,5GHz Band2: 5,7GHz - 5,9GHz Dual frequency band Band1: 2,2GHz - 2,5GHz Band2: 5,7GHz - 5,9GHz Dual frequency band 1+2 Transmission power 25mW / 100mW HF connector TNC Modulation QPSK, 16 QAM, 64 QAM FEC 1/2, 2/3, 3/4, 5/6, 7/8 Guard interval 1/4, 1/8, 1/16, 1/32 Symbol rate 2k, 8k Band width 4MHz, 6MHz, 7MHz, 8MHz Data rate 4 - 31MBit/sek. Delay 140ms / 300ms Compression MPEG 2 (ML@MP) Video input analogue FBAS / FBAS inEE Video input digital (opt.) SD-SDI Audio input analog Mic / Line symetrisch 6dBu Headroom Audio input digital (opt.) S/P-DIF

Video audio transmission

EDBoX Solutions c/o KIRNexus GmbH • Franz-Xaver-Heilig Str. 7 • 88630 Pfullendorf / Germany • Fon +49 (0)7552 92280-0 • Fax+49 (0)7552 92280-32 • info@edbox.tv • www.edbox.tv

Power supply » » »

The 19” diversity EDBoX 1200rx receiver is a real bargain on the broadcast market. It is designed to fulfill the requirements of all TV and media applications. Diversity technology ensures an outstanding video quality even if the system must work with low video levels.

Redundant mains adapter Fuse in front panel LED for power supply and operation mode display

Display and buttons » »

Easy channel control via display Three button menu navigation with OSD for quick setup

The receiver is optimised for rack installation in television OB vans or other racks. Installation and operation is very easy. Clear menu navigation helps to control the device and provides you with all necessary status information. A separate command unit is available as option to be connected with the receiver or with your own CMD unit. Several interfaces for video, sound and communication as well as the redundant mains adapter ensure the systems flexibility. Command unit » »

Technical data - EDBoX 1200rx receiver Power supply 220V AC Power consumption 200mA Type of reception Tuner-Diversity Tuner sensitivity 5.8GHz: -94dB 2.4GHz: -97dB HF connector 2x N connectors (DUAL: 2x 2 N connectors) Video output analogue FBAS / Y-Pr-Pb Status OSD / FBAS digital 2x SD SDI (optional) 2x HD SDI (on request) Audio output analog Line sym. 0dBu digital SP-DIF

Technical data - Data transmission HF connector SMA Frequency band 868MHz Transmission power 25mW (HF) Interfaces Tally-Light (6pol. HIROSE) RS232 (9pol. Sub-D) LANC (9pol. Sub-D) Technical data - Command transmission HF connector SMA Frequency band 446MHz Transmission power 100mW (HF) Interfaces Command (6pol. HIROSE)

Easy control Microphone connector on the front for fixed or remote microphones Integrated loud speaker, means complete command unit in receiver Suitable connectors for further existing CMD

Cooling » »

Large venting slots in front panel for optimised air condition Closed top and bottom of the housing for rack installation

EDBoX Solutions c/o KIRNexus GmbH • Franz-Xaver-Heilig Str. 7 • 88630 Pfullendorf / Germany • Fon +49 (0)7552 92280-0 • Fax+49 (0)7552 92280-32 • info@edbox.tv • www.edbox.tv

ANUSs

JANUS series JANUS Series

world´s first 6 channel high definition encoder within 1RU

Product Highlights » High-efficient AVC H.264 SD/HD compression core » Up to 6 channels per chassis (1RU) » Up to 1080 60p » 24/7 operation » Hot-plugged encoder-interfaces » CBR/VBR, from 2 to 25 Mbps » Autosensing SDI input » DVB-ASI and IP outputs » Low delay mode » No noise, low weight, low power consumption » Redundancy power supply, fans, controllers*

* optional

EDBOX JANUS EHD mtca

Video Encoding Features Description EDBOX SOLUTIONS provide the world´s first single rack-hot redundancy 1RU 6 Channel full HD AVC encoder for professional broadcasting – EDBOX JANUS EHD mtca H.264 AVC video encoder. The high-efficient H.264 compression core enables TV Operators to deliver top-quality HD video services over Satellite, Terrestrial, Cable TV, IPTV networks, Internet TV broadcasters. Our JANUS EHD mtca involves most intelligent and highly demanded features and presents highest video quality at lowest possible bitrate. The form-factor of each channel are following the specifications of the PCI Industrial Computers Manufacture Group (PICMG) and needs just to insert inside one of the 6 AMC slots of the EDBOX SOLUTIONS aprooved AMC industry-standard 1U rack-unit. The physical interfaces are 3GB HD/SD-SDI IN, IP OUT & ASI out. Any JANUS EHD encoder-channelboard can be hot plugged without shutdown the main rack unit.

» Conforms to ISO/IEC4496-10 (H.264/AVC) High Profile Level 4.0 » Formats (autoinput): 1920 × 1080 × 59.94i/50i/50p/60p 1440 × 1080 × 59.94i/50i/50p/60p 1280 × 720 × 59.94p/50p/60p 720 × 480 × 59.94i 720 × 576 × 50i » Pixel format: 4:2:0, 8-bit, YCbCr » Downscaler from HD to SD resolution » Encoding rate: 2 to 25 Mbps » CBR/VBR support » Closed GOP available » Support for output of pseudo playback frames of interlaced video » Test pattern generator for any resolution » Interleaced to progressive pulldown support » CABAC/CAVLC entropy encoding » Custom GOP size » Weighted prediction » Unicast and multicast

The main objective of the JANUS EHD MTCA is the superb video quality and high robustness for 24/7 operation. The remarkable advantages of the new EDBOWX design are low-noise and save power consumption.

Audio Encoding Features

The encoder supports by autosensing any common HD/SD video formats like 1080i, 1080p, 720p, etc. Audio could be encoded into MPEG LII, AAC or Dolby Digital pass through. Any unique channelW can be comfortably managed over the standalone web interface, or by using the SNMP protocol.

Interfaces JANUS EHD mtca

The EDBOX JANUS EHD mtca increased the channel and space capacity for various cable and service providers and designed to deliver one of the worldwide best broadcast HDTV quality under 5 Mbps.

» MPEG-1 Audio Layer 2 encoding » AAC (LC profile) 2-ch encoding* » Dolby digital pass through

» 1x HD/SD-SDI IN/3GSDI SMPTE-292M (1,5 Gb/s),@BNC 75 Ohm » 1x ASI OUT » 1x Ethernet (802.3) 1000/100/10 MBit (Streaming) » 1x Ethernet (802.3) 1000/100/10 MBit (Admin-Backplane)

System Management JANUS EHD mtca » Standalone web user interface for any channel » SNMP V1

*optional

EDBOX JANUS EHD mTCA Specifications Release 1.24 Video IN SDI input Format Systems Input level Return loss Impedance Connector Jitter acceptance Bit rate Aspect Ratio SDI output

3GSDI 292M (HD-SDI) SMPTE 259M (SD-SDI) with EDH error detection 1080i, 1080p, 720p, 525/29.97 Hz and 625/25 Hz, auto-detection of the SDI input signal 800 mVpp nominal ≥ 15 dB, 5 to 270 MHz 75 Ω unbalanced BNC ≥ 25% of a clock period 270 Mbit/s ± 10 ppm 4:3, 16:9

Format

3GSDI 292M (HD-SDI) SMPTE 259M (SD-SDI) out pass through from input *

Inputs Connector Number of channels Embedded Audio Channels Resolution Format Sample frequency

SDI embedded BNC @ 75 Ohm 1 x stereo

Audio IN

2 CHA 20 bits SMPTE 272M 48 kHz (locked to video)

Video compression MPEG-4 AVC Part 10 (H.264) Encoding level Encoding control Modes Aspect ratio Encoding rate H Resolutions V Resolutions Chroma format

up to MP@L4 Adaptive coding parameters and GOP controlled by pre-analysis CBR, VBR 16:9 and 4:3 1,5 to 25 Mbit/s (SD) 3 to 25 Mbps (HD) 1920,1440,1280, 720, 704, 544, 528, 480 and 352 and any other resolution 1080i, 1080p, 720p, 576, 480 and lower resolution 4:2:0

Audio compression Audio codecs Sample rates Layer II encoding modes Layer II encoding rate AAC-LC and HE-AAC bit rates AAC-LC and HE-AAC encoding modes Dolby Digital (AC-3) encoding modes (pass through)

MPEG-1 Layer II, AAC-LC*, Dolby Digital pass through 48 khz single mono, stereo, dual channel, single mono, joint stereo 32 to 384 kbits/s variable, 14 to 320 kbit/s single mono, stereo, dual channel, single mono, joint stereo 1/0 center, 2/0 stereo, 5.1, 6.1

Transport Output IP TS Output Number of outputs Type of connector IP format Format TS packet ASI bitrate

1(streaming out on frontside) Eight-pin RJ-45, MDI 10/100/1GB interface Multicast, unicast UDP/IP lenght 188 bytes, 204 RS on, 204 RS off BNC 75 Ohm, 200 Mbit/s EN50083-9 Packet Size 188/204

Control and Management Management interface Protocol

Ethernet 10/100/GB Base-T on RJ-45 via backpanel and MCU (multi control host) WEB interface, SNMP,

Special Features Latency Pixel Scaler HD to SD Scaler Cold booting up and ready to stream Interleaced to progressive pulldown

< 400 ms encoder only, 650 ms end to end (encoder-decoder) 1920 to 1440 Pixel scaling HD format 1080i / 720p downscaling to SD format 576/480 aprox. 45 sec. Pulls down interleace mode to progressive mode on halfrate (1080@60i to 1080@30p)

* optional

Environmental Dimensions Operation temperature range Weight Cooling

mTCA board mid size 0 to +45°C 0,3 kg /interface no noise cooling

PICMG Specifications Compliance Power consumption

MicroTCA.0, AMC.0, AMC.1, AMC.2, AMC.3 ≤ 30 W (110 V), ≤ 37 W (220 V) per channel

JANUS EHD mTCA Encoder Connector Panel Alarm LED

Streaming LED SDI IN

ASI OUT

LAN streaming and administration (2. LAN interface on backpanel)

Bootup LED

Power LED

Ordering information Description

EDBOX JANUS mTCA EHD AVC H.264 1080 60p Encoder: LSI based HD/SD H.264 realtime encoder. No Noise, High image quality and low delay (less than 650 msec).4:2:0 chroma format, boot up in 33 sec. Video compatible for various formats such as 1080i, 1080p (optional),720p, 480i and 576i. AAC HE v1* & MPEG 1 Layer II audio encoding, Dolby pass through. Built-in HTTP menu,easy maintenance using SNMP function Video Input1 x HD/SD SDI, 1 x Video SDI Out*, Streaming output : 1 NW interface TS over IP and ASI up to 25 Mbps, WebBased Management, Firmware options SDI Video ouput instead of ASI output Hardware options JANUS 6 AMC mtca Chassis: incl. 6 AMC Slots, PSU power supply 230V, fixed fan, fixed AMC network controller MCH5503 subject can change without notice Ver. 01-2011

Powered by: KIRNexus GmbH Franz-Xaver-Heilig-Str. 7 · 88630 Pfullendorf · Germany Fon +49 7552 92280-0 · Fax +49 7552 92280-32 info@edbox.tv · www.edbox.tv

Order Number EDB200

EDB201 EDB210

METIS series

METIS SERIES METIS Series

premium multiplexer Product Highlights » Professional SPTS & MPTS multiplexer » ISO/IEC 13818-1 MPTS » DVB-S /S2 T/ C due to ETSI EN 300-468: NIT, TDT, EIT, BAT » Native remote-manage ment interface » SNMPv2 » Smart Redundancy control and „healt care“ » High speed IP and DVB ASI inputs/ outputs » Non-limited number of input streams over IP » Unicast / Mulitcast / Broadcast support » Automaitc PID - conflict resolution » DC -48V dual power* / 220 AC » GPI (2 x relay out 2 x in ) @ 9-PIN SUB - connector* *optional

EDMUX METIS 4 Multiplexer Applications: Broadcast | IPTV | SNG | Studio Links Distribution Networks | DVB -T /S / C

EDMUX METIS 4 Multiplexer

Introduction EdMUX METIS 4 The ED Solutions is proud to present the new product: METIS 4 Transport Stream Multiplexer. This product extends the new line of ED Solutions professional products for digital TV industry head-end equipment. The multiplexer is developed for the needs of terrestrial, satellite, cable broadcasters, IPTV operators. This product is applicable either to local broadcasting, as well as deployment of cutting edge complexity satellite feeds including tens of channels. The know-how TS processing technology and greatly optimized performance of the ED SOLUTIONS METIS 4 multiplexer makes it astonishing product for Multi-Program Transport Streams creation. As a multiplexer is a key node of a digital TV head-end, METIS 4 is proven to achieve highest robustness. The great attention was spent on 100% compatibility to ISO 13818-1 and ETSI TR 101 290 standards. The early fail-over detection and alarming mechanism make the ED Solutions METIS 4 multiplexer an outstanding product on the market. By connecting of the METIS 4 next to set of ED Solutions TAURUS or VIRGO Encoders, it‘s getting possible to build rapidly comprehensive head-end station with ready-to-air, high quality MPTS signal at the output. Version 12-2010

Supported Standards » ISO/IEC 13818-1: Transport Streams » DVB-S / S2 / T / C due to ETSI EN 300-468 (Specification for Service Information (SI) in DVB systems) » ETSI TR 101 290 (Measurement guidelines for DVB systems). » ISDB, ATSC * - optional by demand

Advanced Features » PSI/SI generation, processing and insertion − PAT / PMT; − DVB-S/S2/T/C SI: NIT, TDT, SDT, EIT, BAT; » automatic PID-conflict resolution; » service filtering of TV programs + automatic PAT/PMT regeneration; » PID filtering, PID remapping; » PCR De-jittering; » monitoring of CC errors by the input interfaces » automatic fail-over early detection and input signal loss alarming

Inputs » 188-bytes Single-Program Transport Streams (SPTS) or Multi-Program Transport Streams (MPTS) input over DVB-ASI (max 5 inputs), or TS- over-UDP unicast / multicast FEC-pro tected. Any input TS may contain H.264, MPEG-2, MPEG-4, VC-1 video, MPEG Audio, AAC / AAC-HE ADTS / LATM, AC-3 audio, DVB teletext, user-defined private data. Physical interfaces » IP: default 2 x 1 Gb, optionally up to 6 ports * » ASI BNC 75 Ohm: Up to 6 DVB-ASI ports (max 5 inputs and 6 outputs) *

Outputs » 188-byte ISO 13818-1 Multi-Program Trans port Stream or DVB-S / T / C MPTS over IP or over ASI (max 6 outputs). * By demand could be supplied by firmware with ISDB, ATSC support; » Output rate: 220 Mbps per ASI output (total up tp 880 Mbps), up to 200 Mbps per IP interface *

Monitoring and Control » SNMP, LED display.

Power: » Supply voltage: 100 .. 240V ± 10%, 50 .. 60Hz » DC dual power -48VDC » Power consumption: 60-80W ~

*optional

Powered by: KIRNexus GmbH Franz-Xaver-Heilig-Str. 7 路 D-88630 Pfullendorf 路 Germany Fon +49 7552 92280-0 路 Fax +49 7552 92280-32 info@edbox.tv 路 www.edbox.tv

CARPO series

CARPO SERI CARPO Series

premium broadcast audio ip codec Product Highlights » Professional audio IP & ASI encoder/decoder » Compact 1U design » 8 channels encoder or decoder or mixed » No noise, no heat » DC -48V dual power / 220AC » Full DSP-based hardware » DVB-ASI and IP outputs » A/D D/A 24bit converter » Ultra low delay mode supported by enhanced apt-X ® » Full DVB compliant » MPEG-1/2 Layer II » MPEG-2 AAC » MPEG-4 AAC LC, HE AAC HE-AAC V2

EDBOX CARPO MX8 audio ip codec Introduction EdBOX CARPO MX8 The CARPO MX8 series is an Audio Encoder/Decoder/Codec for up to 8 stereo channels (encoder channels, decoder channels or mixed). Compact (19“ 1U housing), highly energy efficient (< 2W per stereo channel in AES/EBU version), DSP-based hardware. Streaming of elementary streams over IP or generation of DVB-compliant MPEG-2 transport stream, output via IP or ASI. Several ordering options are available to adapt the audio input/output configuration to the customers requirements in a flexible way. Supported Encoding and Decoding Standards:

Outputs - Transport Protocols:

» » » » »

» Over IP:

ISO/IEC 11172-3, 13813-3 MPEG-1/2 Layer II ISO/IEC 13813-7 MPEG-2 AAC ISO/IEC 14496-3 MPEG-4 AAC LC ISO/IEC 14496-3 HE-AAC, HE-AAC V2 APT-X® and enhanced apt-X®

Bitrate: » For MPEG-1/2 Layer II 32 kbps to 384 kbps » For AAC 32 kbps to 384 kbps » For APT-X and enhanced apt-X® up to 384 kbps Sampling Rate:

Streaming of elementary streams compliant to RFC3550/3551, RFC3016, RFC3640, EBUTECH 3326 Output of DVB MPEG-2 transport streams including service information according to ETSI EN 300 468, compliant to Pro-MPEG Code of Practice #3 release 2 » Over ASI: Output of DVB MPEG-2 transport streams including service information according to ETSI EN 300 468

» 32 kHz, 44.1 kHz, 48 kHz Audio Frequency Range (analogue):

Monitoring and Control:

» 20 Hz .. 20 Khz +/- 0.3 dB

» via Ethernet by accessing the online-system HTTP web server with any internet browser » via Ethernet using SNMP » via the front-panel keyboard and display

Audio Input / Output: » Digital: AES/EBU, electrical, XLR (IEC958) » Analogue: XLR, electronically balanced, level range 0 .. +18 dBu (adjustable in 0.5 dB steps) » A/D, D/A converter: 24 bits

Network Interfaces: » » » »

2 separate Ethernet interfaces (IEEE 802.3, RJ45) for data (IP streaming, MPEG-2 TS) and control (HTTP, SNMP, ancillary data), optical interfaces on request E1 (G.703, G.704) X.21 (synchronous serial interface) DVB-ASI (EN 50083-9)

Power: » Supply voltage: 100 .. 240V ± 10%, 50 .. 60Hz Power consumption: Dependent on number of channels, 2W/stereo channel in AES/EBU version » DC dual power -48VDC Ordering Options for Audio Inputs & Outputs: » » » » » »

up to 8 stereo channels (encoder, digital AES/EBU) up to 4 stereo channels (encoder, analogue and digital AES/EBU) up to 8 stereo channels (decoder, digital AES/EBU) up to 4 stereo channels (decoder, analogue and digital AES/EBU) up to 4 stereo channels (encoder, digital AES/EBU) + 4 stereo channels (decoder, digital AES/EBU) up to 2 stereo channels (encoder, analogue and digital AES/EBU) + 2 stereo channels (decoder, analogue and digital AES/EBU)

Powered by: KIRNexus GmbH Franz-Xaver-Heilig-Str. 7 路 D-88630 Pfullendorf 路 Germany Fon +49 7552 92280-0 路 Fax +49 7552 92280-32 info@edbox.tv 路 www.edbox.tv

VIRGO

VIRGO SERIE VIRGO SERIES

premium standard definition encoding and decoding

Product Highlights » Professional H.264 AVC encoder/decoder » Compact 1U design » Cost-effective intelligent solution » Integrated with DataMiner network management system » On-the-fly bitrate change » CBR/VBR, from 3 to 15 Mbps » DVB-ASI and IP outputs » COP#3 FEC for IP networks » Low delay mode » Saves channel bandwidth and increases the transmitted channels » MPEG-2, WM9, VC1 encoding and decoding* » DC -48V dual power* / 220 AC *optional

EDBOX VIRGO ESD H.264 standard definition encoder Video encoding features: » MPEG-4 part 10 (H264) SD encoding » 4:2:0 and 4:2:2* encoding » Main & high profile up to level 4 (MP@L4) » Simultaneous multi-coding MPEG2 SD encoding* » Constant and variable bit rate encoding up to 15Mbps (25Mpbs MPEG2) » Bit rate on-the-fly change within 100ms » SD SDI and CVBS INPUT (PAL, NTSC) » Resolution up to Full D1 (720x576, 640x480) » Aspect ratios 4:3 and 16:9 » Pre-process and pre-analysis with 3.2 pull-down inversion » Noise reduction with 8 levels, input de-blocking filtering » Adaptive motion compensated temporal filtering » MBAFF » CABAC/CAVLC entropy encoding » Custom GOP size, I, P and B frames, adaptive B-frames » Weighted Prediction » DVB over IP output, RTP/RTSP, TS over RTP » Unicast and Multicast

Audio encoding features » SDI embedded (8 CHA) » AES/EBU 1 CHA (2 CHA*) » Analog Audio +6db (2CHA) » Audiochannel level changes » MPEG-1 Layer II » AAC LC / AAC-HEv1 / AAV-HEv2 » LATM support » Dolby digital® pass through » Dolby digital® AC3 (6CHA*)

Encoding extras » Transcoding SPTS/MPTS MPEG-2 to H.264 AVC* » DVB ASI in/out* » Hard-disk store (up to 250GB) » Store and forward* (streaming higher bitrate over lower network incl. buffering) » IP forwarding to different unicast and multi-cast adresses in real time » Extensive low latency streaming < 400ms » Video input preview screenshots on stand-alone web interface » Automatic input format detection and switching » Upscale and downscale of video input in realtime*

Description Edbox Virgo ESD The newly designed EDBoX VIRGO ESD H.264 encoder is presented for professional broadcasting industry. Keeping its excellent quality and strong conformance to AVC H.264 standard specification, EdBox VIRGO ESD encoder matches all requirements of our customers and supplies a wide range of flexibility with comfort set of features: on-the-fly real-time bit-rate changing, ultra-low bit rate encoding, Low latency mode (<400ms). Due to optimal cost and high quality Edbox VIRGO ESD encoder is widely used all over the world in 24/7 environment. The excellent picture quality is achieved thanks to highly optimized compression ratio, saving a channel bandwidth at the same time. The EDBoX VIRGO ESD encoder supports MPEG-2, WM9 and VC1 encoding in parallel* to H.264 AVC within the same 1U unit. For convenient management VIRGO ESD encoder offers native remote web-interface control. EDBOX VIRGO ESD encoder supports unified SNMPv2 protocol. Our customers are at ease with the unique EDBOX “bundling” technology designed for video system management and administration. EDBoX “boxmaster-bundling“ introduces useful features like autoscan for signal by decoder, autostart of decoder at the same time the encoder is started, instantaneous access to decoder‘s web-interface from the encoder and vice-versa. The EDBOX VIRGO ESD encoder is a new design for the trusted core, proven by many years of customer satisfaction.

The EDBOX VIRGO 4 Web-Interface » Event logging, enhanced messaging and alarming mechanizm » Managing repository of local encodings stored on HDD » Mapping of encoders / decoders, EDBOX-Master for management of EDBOX clusters » Improved intuitive user-interface design

» Overall unit status display, audio/video signal loss detection and alarming » FEC status signaling » Real-time graphs and long-term statistics for major parameters (actual bitrate, system load, audio level, etc.), averaging for analysis

EDBOX VIRGO DSD H.264 standard definition decoder

Description Edbox Virgo DSD

Video decoding features

The EDBOX VIRGO DSD multi-format decoder offers the premise to decode all of the video formats and resolutions in realtime be it MPEG-2 or MPEG-4 standard definition. Control of the decoder is supported via 4 line front panel interface, on board web application and SNMP.

» MPEG-4 part 10 (H264) SD decoding » MPEG-2 SD decoding » 4:2:0 and 4:2:2* decoding » SD SDI and CVBS Output (PAL, NTSC) » Genlock for frame syncronization » Aspects ratios 4:3 and 16:9 » Main & high profile up to level 4 (MP@L4) » CABAC/CAVLC entropy decoding » Transport input MPEG-2 TS stream, over UDP/IP, RTP, RTSP, TS over RTP » Unicast and multicast

Two 1GB Ethernet ports are available, one for administration and the other one for streaming input. Additionally the decoder offers the possibility of IP forwarding to send out the incoming stream to various IP addresses as unicast and/ or mulitcast. EDBOX solutions offer a lot of extensive features where the user can control from every EDBOX unit via the frontpanel or over the website, called EDBOX mapping. This offers the customer a great option to “see what happens” on local- and remoteside. Remarkable other features like autostart, video bitrate on the fly within 100ms, packetlosts realtime information, FEC (forward error correction), pinging and tracert the remote unit(s) and our market leading network line measurement tool to check the networkline between encoder and decoder makes the EDBOX VIRGO DSD decoder one of the leading units on the market.

Audio decoding features » SDI embedded (8 CHA) » AES/EBU 1 CHA (2 CHA*) » Analog Audio +6db (2CHA) » Audiochannel level changes » MPEG-1 Layer II » AAC LC / AAC-HEv1 / AAV-HEv2 » LATM support » Dolby digital® pass through » Dolby digital® AC3 (6CHA*)

Decoding extras EDBOX VIRGO 4 Remote Web-Interface: Long-term Statistics.

» Transcoding SPTS/ MPTS MPEG-2 to H.264 AVC* » DVB ASI in/out* » Store on harddisk (up to 250GB) » IP forwarding to different unicast and multicast adresses in realtime » Extensive low latency streaming < 400ms » Video output preview screenshots on stand alone web interface » Automatic output format detection and switching The EDBOX-4 Remote Control WebInterface for Encoder/Decoder Bundles: Main Page with Mapped EncoderDecoder Bundles

*optional

Version 12-2010

Powered by: KIRNexus GmbH Franz-xaver-Heilig-Str. 7 路 D-88630 Pfullendorf 路 Germany Fon +49 7552 92280-0 路 Fax +49 7552 92280-32 info@edbox.tv 路 www.edbox.tv

HydRUs

hydrus ser Hydrus Series

premium high definition encoding

Designed for 24/7 operation » Broadcast » IPTV » SNG » Studio links » Corporate streaming » Multiformat » HD/SD 4:2:0 and 4:2:2 » MPEG-4 AVC & MPEG-2 » Store to disk » Low latency » Low power consumption » Dual power - 48VDC*/220 AC » Low weight

*optional

EDBox Hydrus EHD H.264 AVC and MPEG-2 standard and high definition 4:2:2 encoder

EDBOX HYDRUS EHD

Description

Video encoding features

EDBOX one of the leaders of encoding and decoding systems offer in a compact one-rack unit the latest in H.264/AVC (MPEG-4 part 10) 4:2:0/ 4:2:2* high quality standard and high definition compression technology, to help optimize bandwidth utilization in digital transmission setups.

» MPEG-4 part 10 (H.264) & MPEG2 HD/SD encoding » 4:2:0 and 4:2:2 chroma format » HD/SD SDI and CVBS INPUT (PAL, NTSC) » Aspect ratios 4:3 and 16:9 » Main & high profile up to level 4 (MP@L4) » Noise reduction with 8 levels, input-deblocking filtering » Pre-Processing and pre-analysis with 3.2 pull-down inversation » Adaptive motion compensated temporal filtering » MBAFF, constant and variable bitrate encoding up to 55 Mbps 4:2:2 (60 Mpbs MPEG2 HD) » Bitrate changed on the fly within 100ms » CABAC/CAVLC entropy encoding » I,P and B frames, autoset » Weighted prediction » Video compatible for various formats such as 1080i, 720p, 480i and 576i » Transport output MPEG-2 TS stream, over UDP/IP, RTP, RTSP, TS over RTP » Unicast and multicast

The optimized performance of EDBOX HYDRUS EHD encoder enhanced bandwidth efficiency with ultra-low bit rate encoding. EDBOX systems are used in 24/7 envoirement e.g. studio links, news contribution, SNG and local TV content feeds for IPTV-headends and achieve broadcast quality at lowest bitrate. With its powerful and market leading performance it enables operators to transmit many more channels within their available bandwidth over satellite, terrestrial networks, digital cable and IPTV providers. Inside this encoder MPEG2, WM9 and VC1 can optionaly co-exist with H.264 AVC encoding within the same unit.

Product Overview The EDBOX HYDRUS EHD encoder offer a very cost effective and high quality broadcast codec Together with the EDBOX TAURUS DHD decoder and our extensive video pre-processing and intelligent encoding algorithm we can provide very low latency > 400ms end to end. Control of the encoder is supported via 4 line front panel interface, on board web application and SNMP. Two 1GB Ethernet ports are available, one for administration and the other one for streaming out. EDBOX solutions offers a lot of extensive features where the user can control from every EDBOX unit any EDBOX unit, controlled via the frontpanel or over the webside. This is called EDBOX mapping. This offers the customer a great option to “see what happens” on local- and remoteside. Fabelous other features like, autostart, video bitrate on the fly within 100ms, packetlosts realtime informations, forward error correction, pinging and tracert the remote unit(s) and our market leading network line measurement tool to check the networkline between encoder and decoder makes the EDBOX HYDRUS EHD encoder one of the leading units on the market.

Version 12-2010

Encoding extras » Transcoding SPTS/ MPTS MPEG-2 to H.264 AVC* » DVB ASI in/out* » Store on harddisk (up to 250GB) » Store and forward* (streaming higher bitrate over lower network incl. buffering) » IP forwarding to different unicast and multicast adresses in realtime » Extensive low latency streaming < 400ms » Video input preview screenshots on stand alone web interface » Automatic input format detection and switching » Upscaling and downscaling of video input in realtime*

EDBoX HYDRUS EHD encoder specifications release 4.0 Video IN SDI input Format Systems Input level Return loss Impedance Connector Jitter acceptance Bit rate Aspect Ratio Composite input (only SD) Systems Video level Impedance Return loss Noise Frequency response Differential gain/phase Aspect Ratio Genlock input Format/ Impedance Inputs Connector Number of channels Analog Audio Impedance CMRR Clipping level Return loss Input level Sample rate AES/EBU Digital Audio Input level Channels Sample rate Impedance Return loss Embedded Audio Channels Resolution Format Sample frequency

292M (HD-SDI) SMPTE 259M (SD-SDI) with EDH error detection 1080i, 720p, 525/29.97 Hz and 625/25 Hz, auto-detection of the SDI input signal 800 mVpp nominal ≥ 15 dB, 5 to 270 MHz 75 Ω unbalanced BNC ≥ 25% of a clock period 270 Mbit/s ± 10 ppm 4:3, 16:9 or auto-detect on VII or WSS PAL (B, D, G, H, I, K, M and N) and NTSC M 0 dBV nominal 75 Ω unbalanced > 35 dB, 10 Hz to 5.5 MHz < -55 dB RMS weighted relative to 0.7 V 0.3 dB peak-to-peak; 0.2 to 4.2 MHz ≤2% / ≤ 2° 4:3, 16:9 BNC / 75 Ω unbalanced Audio IN Analog, AES/EBU and SDI embedded BNC and XLR 1 x stereo / 2 x mono 6 CHA* 600 Ω or >20 kΩ balanced >50 dB, 1 kHz -6 to +24 dBu, 500 mdBu increments >15 dB, 0.1 to 6.0 MHz 0.5 to 2 Vpp nominal 48 kHz 2 to 7 Vpp nominal, min. 500 mV 1x stereo / 2x mono (2x stereo / 4x mono*) 32 kHz, 44.1 kHz and 48 kHz 110 Ω balanced >21 dB, 0.1 to 6.0 MHz

8 (12CHA*) 20 bits SMPTE 272M 48 kHz (locked to video) Audio compression Audio codecs MPEG-1 Layer II, AAC-LC, HE-AACv1, HE-AACv2, Dolby Digital (AC-3)* Sample rates 48 khz Layer II encoding modes single mono, stereo, dual channel, single mono, joint stereo Layer II encoding rate 32 to 384 kbits/s AAC-LC and HE-AAC bit rates variable, 14 to 320 kbit/s AAC-LC and HE-AAC single mono, stereo, dual channel, single encoding modes mono, joint stereo Dolby Digital (AC-3) 1/0 center, 2/0 stereo, 5.1, 6.1 encoding modes Dolby Digital (AC-3) 56 to 640 kbit/s encoding and pass

*optional

Video compression MPEG-4 AVC Part 10 (H.264) Encoding level up to MP@L4 Encoding control Adaptive coding parameters and GOP controlled by pre-analysis Modes CBR, VBR, VBR Filler, MBAFF Aspect ratio 16:9 and 4:3; auto mode based on WSS or VII Encoding rate 0.3 to 15 Mbit/s (SD) 4 to 30 Mbit/s (HD) with ASI* up to 65 Mbit/s H Resolutions 1920,1440,1280, 720, 704, 544, 528, 480 and 352 and any other resolution V Resolutions 1080i, 720p, 576, 480 and lower resolution Chroma format 4:2:0 / 4:2:2* MPEG-2* Encoding MPEG-2 MP@ML* Encoding control Adaptive coding parameters and GOP controlled by pre-analysis Modes CBR, VBR Aspect ratio 16:9 and 4:3; auto mode based on WSS or VII Encoding rate 0.5 to 45 Mbit/s H Resolutions 1920,1440,1280, 720, 704, 544, 528, 480 and 352 and any other resolution V Resolutions 1080i, 720p, 576, 480 and lower resolution Chroma format 4:2:0 / 4:2:2* VBI Data Processing Standard VBI processing* Closed captions from EIA 708; MPEG-2 also DVS 157; SA Type 4 composite and SDI Embedded in SDI Transmission format According to DVB-VBI standards VBI formats EDH, sampled VBI (Teletext, VPS, WSS), VII, Closed Captions Transparent lines Up to four lines per field DVB and SA formats Transport Output IP TS Output Number of outputs 2 (ETH2 can be used for administration and streaming out) Type of connector Eight-pin RJ-45, MDI 10/100/1GB interface IP format Multicast, unicast Format UDP/IP TS streaming Up to 5 single or multiprogram streams TS packet Length 188 bytes, 204 RS on, 204 RS off ASI bitrate* BNC 75 Ohm, 200 Mbit/s EN50083-9 Packet Size 188/204 Control and Management Management interface Ethernet 10/100/GB Base-T on RJ-45 Front panel LCD 4 lines character display with menu and input keys Protocol WEB, SNMP, EDBoX manager GPI 2 x relay out 2 x in @ 9-PIN SUB-D * Special Features Latency < 350 ms encoder only, 600 ms end to end (encoder-decoder) Multi-coding Simultaneous H.264 and MPEG-2 encoding* Transcoding SPTS/MPTS MPEG-2 to H.264 AVC up to 3 channels* Store to disk Harddisk realtime recording up to 250 GB IP forwarding Unicast and multicast IP forwarding to max. 5 different IP adresses

Environmental 482.6 x 44.5 x 480 mm 0 to +45°C 9.5 kg Forced cooling with air flow from back to front AC / DC Power 100 to 240 V AC ±10% , dual -48 VDC ± 10%* 47 to 63 Hz ≤ 130 W (110 V), ≤ 145 W (220 V) ≤ 130 W (-48 V DC)

Dimensions (W x H x D) Operation temperature range Weight Cooling Voltage range Line frequency Power consumption subject can change without notice ver. 12-2010

*optional

Encoder connector panel (AC version) V

CVBS IN

SYNC IN V

USB ASI I/O

AUDIO L IN

AUDIO R IN

HYDRUS EHD AVC ENCODER GERMANY 8863 PFULLENDORF www.edbox.tv

AES/EBU IN

ETH 1

ETH 2

1 AT 250 V 110 - 250 V

SDI IN

Ordering information Description EDBoX Hydrus EHD H.264 & MPEG2 MPEG-2@ML realtime broadcast encoder. High image quality and low delay (less than 450 msec). High, Main and base profile upt to Level4 4:2:2 and 4:2:0 chroma format on MPEG-2@ML4:2:0 4:2.0 on AVC/H.264. Video compatible for various formats such as 1080i, 720p, 480i and 576i. Significantly enhanced audio functions 2-channel analog audio, balanced XLR 8 channels SDI embedded optional Built-in Dolby Digital (AC3) encoder module (optional) Dolby Digital (AC3) pass through function Built-in 2x Ethernet 1GB interface for IP transmission. Firmware options MPEG2 MP@ML 4:2:2 Codec for EDBoX Hydrus EHD. After the upgrade user can choose between AVC H.264 or MPEG-2 codec FEC (forward error correction) upgrade for all EDBOX AVC H.264 & MPEG2 Encoder/Decoders: FEC based on FECcop3 Dolby Digital® (AC-3) 6 channel encoding for EDBoX Hydrus EHD (EDB95)“ 4:2:2 chroma format for EDBoX Hydrus EHD (EDB95): firmware optional to support 4:2:2 chroma format encoding Hardware options ASI OUTPUT for EDBoX Hydrus EHD (EDB95): Hardware upgrade ASI output interface (200 Mbps)

Order Number EDB95

EDB134 EDB84 EDB133 EDB130 EDB132

The EDBOX Hydrus 4 Web-Interface » Event logging, enhanced messaging and alarming mechanism » Managing repository of local encodings stored on HDD » Mapping of encoders / decoders, EDBOX-Master for management of EDBOX clusters » Improved intuitive user-interface design » Overall unit status display, audio/video signal loss detection and alarming, » FEC status signaling » Real-time graphs and long-term statistics for major parameters (actual bitrate, system load, audio level, etc.), averaging for analysis

Powered by: KIRNexus GmbH Franz-Xaver-Heilig-Str. 7 · 88630 Pfullendorf · Germany Fon +49 7552 92280-0 · Fax +49 7552 92280-32 info@edbox.tv · www.edbox.tv

EDBOX Hydrus 4 Remote Web-Interface: Video source preview

The EDBOX-4 Remote Control Web-Interface for Encoder/ Decoder Bundles: Main Page with Mapped Encoder-Decoder Bundles

HydRUs

hydrus ser Hydrus Series

premium high definition encoding

*optional

EDBox Hydrus EHD H.264 AVC and MPEG-2 standard and high definition 4:2:2 encoder

EDBOX HYDRUS EHD

Description

Video encoding features

Version 12-2010

*optional

Dimensions (W x H x D) Operation temperature range Weight Cooling Voltage range Line frequency Power consumption subject can change without notice ver. 12-2010

*optional

Encoder connector panel (AC version) V

CVBS IN

SYNC IN V

USB ASI I/O

AUDIO L IN

AUDIO R IN

HYDRUS EHD AVC ENCODER GERMANY 8863 PFULLENDORF www.edbox.tv

AES/EBU IN

ETH 1

ETH 2

1 AT 250 V 110 - 250 V

SDI IN

Order Number EDB95

EDB134 EDB84 EDB133 EDB130 EDB132

Powered by: KIRNexus GmbH Franz-Xaver-Heilig-Str. 7 · 88630 Pfullendorf · Germany Fon +49 7552 92280-0 · Fax +49 7552 92280-32 info@edbox.tv · www.edbox.tv

EDBOX Hydrus 4 Remote Web-Interface: Video source preview

The EDBOX-4 Remote Control Web-Interface for Encoder/ Decoder Bundles: Main Page with Mapped Encoder-Decoder Bundles

Taurus

Taurus serie Taurus Series

premium high definition encoding and decoding

Product Highlights » High-efficient H.264 compression core » Excellent quality in HD resolution » Up to 1080 60p » 24/7 operation » On-the-fly bitrate change » CBR/VBR, from 2 to 25 Mbps » DVB-ASI and IP outputs » Low delay mode » No noise, low weight, low power consumption » DC -48V dual power 220 AC

EDBOX TAURUS EHD

Description

Video Encoding Features

EDBOX is proud to introduce the outstanding solution for professional broadcasting – EDBOX TAURUS EHD H.264 AVC video encoder. The TAURUS EHD Encoder is proven to satisfy even hard-to-please customers. The high-efficient H.264 compression core enables TV Operators to deliver top-quality HD video services over Satellite, Terrestrial, Cable TV, IPTV networks, Internet TV broadcasts. Our Taurus EHD involves most intelligent and highly demanded features and presents highest video quality at lowest possible bitrate. The form-factor is the industry-standard 1U rack-unit, the physical interfaces are HD-SDI In and pass through out. As we always do, the main objective of any EDBOX product is the superb video quality and high robustness for 24/7 operation. The remarkable advantages of the new EDBOX design are low-noise and save power consumption.

The encoder supports the most common HD/SD video formats 1080i, 1080p, 720p, etc. Audio could be encoded into MPEG LII, AAC or Dolby Digital AC-3. The EDBOX Taurus EHD is comfortably managed over the widely accepted EDBOX v. 4 WEB remote control interface, or using the SNMP protocol. The EDBOX TAURUS EHD is making real to build high-dense, efficient and fast time-to-market head-end stations. Also available as EDBOX TAURUS EHD light (no frontpanel, one network interface only).

Audio Encoding Features » Dolby pass through » MPEG-2 AAC (LC profile) 2-ch encoding » LPCM 2-ch encoding » MPEG-1 Audio Layer 2 encoding

Interfaces TAURUS EHD EDBOX Taurus EHD/DHD Bundle For efficient administration the EDBOX Taurus EHD Encoder can be bundled with EDBOX Taurus DHD Decoder. EDBOX "bundling" brings useful features like autoscan for signal by decoder, autostart of decoder the same time encoder is started, instantaneous access to decoder‘s web-interface from the encoder and vice-versa. EDBOX Encoders and Decoders can be fully controlled both remotely and locally. Local Control of EDBOX units exercised by 4-line front panel interface. For administration and streaming out two 1 GB Ethernet ports are available. The Remote control can be performed in two ways. Any EDBOX Unit is accessed via the user friendly EDBOX webinterface. In addition, EDBOXes completely manageable over SNMP protocol. Integration with DataMiner NMS system is another prime advantage of our products. Great opportunities like: fail-over scenarios execution, encoders -decoders redundancy groups creation, logical combining of encoders and decoders into TV services, alarm tracking, entire system illustrative representation and further EDBOX solution automation becomes possible.

Version 12-2010

» 1x HD/SD-SDI IN/3GSDI SMPTE-292M (1,5 Gb/s),@BNC 75 Ohm » 1x HD/SD -SDI pass through* » 1x ASI OUT » 2x XLR +4db balanced audio analog » 2x Ethernet (802.3) 1000/100/10 MBit » SNMP V1 » GPI with 2 x relay out and 2 x in @ 9-PIN SUB D*

EDBOX TAURUS DHD H.264 AVC/MPEG-2 multi format decoder Product Overview

Video decoding features

The EDBOX Taurus DHD multi-format decoder offers the premise to decode all of the video formats and resolutions in realtime be it MPEG-2 or MPEG-4 SD or HD. Control of the decoder is supported via 4 line front panel interface, on board web application and SNMP.

» MPEG-4 part 10 (H264) SD decoding » MPEG-4 part 10 (H264) HD decoding » MPEG-2 SD decoding » MPEG-2 HD decoding » 4:2:0 and 4:2:2 decoding » SD SDI and CVBS Output (PAL, NTSC) » Genlock for frame syncronization » Aspects ratios 4:3 and 16:9 » Main & high profile up to level 4 (MP@L4) » Decoder follows the encoder with bitrate changed on the fly within 100ms » CABAC/CAVLC entropy decoding » Resolution up to Full HD » Transport input MPEG-2 TS stream, over UDP/IP, RTP, RTSP, TS over RTP » Unicast and multicast

Two 1GB Ethernet ports are available, one for administration and the other one for streaming input. Additionally the decoder offers the possibility of IP forwarding to send out the incoming stream to various IP addresses as unicast and/ or multicast. EDBOX solutions offer a lot of extensive features where the user can control from every EDBOX unit any EDBOX unit via the frontpanel or over the webside, called EDBOX mapping. This offers the customer a great option to “see what happens“ on local- and remoteside. Fabulous other features like autostart, video bitrate on the fly within 100ms, packetlosts realtime information, forward error correction, pinging and tracert the remote unit(s) and our market leading network line measurement tool to check the networkline between encoder and decoder makes the EdBoX Taurus DHD decoder one of the leading units on the market.

Interfaces TAURUS DHD

Decoding extras

» 1x HD/SD-SDI IN/3GSDI SMPTE-292M (1,5 Gb/s),@BNC 75 Ohm » 1x Analog Video out @ BNC 75 Ohm » 1x ASI IN* » 2x XLR +4db balanced audio analog out » 1x AES/EBU out (stereo) @ XLR » 2x Ethernet (802.3) 1000/100/10 MBit » SNMP V1, Web interface, Frontpanel » GPI with 2 x relay out and 2 x in @ 9-PIN SUB D*

» Transcoding SPTS/ MPTS MPEG-2 to H.264 AVC* » DVB ASI in/out* » Store on harddisk (up to 250GB) » Store and forward* (streaming higher bitrate over lower network incl. buffering) » IP forwarding to different unicast and multicast adresses in realtime » Extensive low latency streaming < 400ms » Video output preview screenshots on stand alone web interface » Automatic output format detection and switching

*optional

The EDBOX Taurus 4 Web-Interface » Event logging, enhanced messaging and alarming mechanism » Managing repository of local encodings stored on HDD » Mapping of encoders / decoders, EDBOX-Master for management of EDBOX clusters » Improved intuitive user-interface design » Overall unit status display, audio/video signal loss detection and alarming, » FEC status signaling » Real-time graphs and long-term statistics for major parameters (actual bitrate, system load, audio level, etc.), averaging for analysis

EDBOX Taurus 4 Remote Web-Interface: Long-term Statistics

The EDBOX-4 Remote Control Web-Interface for Encoder/ Decoder Bundles: Main Page with Mapped Encoder-Decoder Bundles

vollmer-stockach.de

Powered by: KIRNexus GmbH Franz-Xaver-Heilig-Str. 7 · 88630 Pfullendorf · Germany Fon +49 7552 92280-0 · Fax +49 7552 92280-32 info@edbox.tv · www.edbox.tv

HydRUs

hydrus ser Hydrus SERIES

high definition hybrid reciever and decoder

Designed for 24/7 operation » Broadcast » Content providers » Studio links & cable MSO´s » QPSK, 8PSK, QAM interface » Multi-input & output select » DVB-ASI IN & OUT » HD/SD high profile@level 4.1 » H.264 AVC & MPEG-2 » Dual CI descrambling interface* » BISS -1/E support » Automated service selection » AVC low delay decoding » Low power consumption » Redundancy Dual AC Power » Redundancy Dual DC P-48V Power* » Low weight *optional

EDBox Hydrus IRD HYBRID HD/SD H.264 AVC and MPEG-2 multiformat reciever and decoder

EDBOX HYDRUS IRD

Product Overview EDBOX SOLUTIONS introduced the very new HYDRUS IRD our new reciever and stream processing plattform witch offers a very cost effective and high quality broadcast satellite reciever and decoder, also downward compatible with SD resolution. Together with the EDBOX HYDRUS or TAURUS EHD encoder´s based on our extensive video pre-processing and intelligent encoding algorithm we can provide very low latency > 400 ms end to end thats perfect for newsgathering and contribution applications. The HYDRUS IRD enables the applications in recieving, decoding and demodulate of HD/SD streams transported through IP, satellite and cable. EDBOX SOLUTIONS offers a professional choice for point-to-point capture, transport and head-end monitoring and controlling. Fabelous other features like, various telecom input interface (QPSK, 8PSK, QAM) and DVB over IP outputs plus DVB ASI IN and multiple DVB-ASI outputs makes the EDBOX HYDRUS IRD one of the leading product on the market. The HYDRUS IRD features state memorization functions, wicht enables the system to restore to its last operating status in case of power lost. The error alarm and system log features provide users with an easy approach to monitor and control the broadcasting status and trouble clearing. The HYDRUS IRD can act as a reciever to descramble and transmit DVB-S2 satellite signals and can also act as a IP and or ASI retransmitter solution.

Version 1-2011

Video decoding features » MPEG-4 part 10 (H.264) & MPEG2 HD/SD decoding » 4:2:0 and 4:2:2 chroma format * » HD/SD SDI and CVBS OUTPUT (PAL, NTSC) » Aspect ratios 4:3 and 16:9 » Main & high profile up to level 4 (MP@L4) » Multi-input and output selection @ DVB-ASI and IP IN/OUT » QPSK, 8PSK and QAM input interface (dual*) » Video compatible for various formats such as 1080i, 720p, 480i and 576i » Transport input MPEG-2 TS stream, over UDP/IP, RTP, TS over RTP » Unicast and multicast

Audio decoding features » SDI embedded (4CHA) » AES/EBU (2 CHA) » Analog Audio +6db (4CHA) » MPEG-1 Layer II » AAC LC / AAC-HEv1 / AAV-HEv2 » Dolby digital® pass through

Extras » Redundant Power Supply AC/ DC * » Error alarm and system log » Very low latency end to end 400ms » Dual CI descrambling interface use or decode and loop through » BISS-1 & BISS-E support » Webinterface & SNMP

EDBoX HYDRUS IRD specifications release 1.3 Video OUT SDI output Format Systems Input level Return loss Impedance Connector Jitter acceptance Bit rate Aspect Ratio Composite output (only SD) Systems Video level Impedance Return loss Noise Frequency response Differential gain/phase Aspect Ratio Component output Systems Genlock input Format/ Impedance Inputs Connector Number of channels Analog Audio Impedance CMRR Clipping level Return loss Input level Sample rate AES/EBU Digital Audio Input level Channels Sample rate Impedance Return loss Embedded Audio Channels Resolution Format Sample frequency

2 x 292M (HD-SDI) SMPTE 259M (SD-SDI) 1080i, 720p, 525/29.97 Hz and 625/25 Hz, auto-detection of input signal 800 mVpp nominal ≥ 15 dB, 5 to 270 MHz 75 Ω unbalanced BNC ≥ 25% of a clock period 270 Mbit/s ± 10 ppm 4:3, 16:9 PAL (B, D, G, H, I, K, M and N) and NTSC M 0 dBV nominal 75 Ω unbalanced > 35 dB, 10 Hz to 5.5 MHz < -55 dB RMS weighted relative to 0.7 V 0.3 dB peak-to-peak; 0.2 to 4.2 MHz ≤2% / ≤ 2° 4:3, 16:9 1080i, 720p, 525/29.97 Hz and 625/25 Hz BNC / 75 Ω unbalanced Audio OUT Analog, AES/EBU and SDI embedded BNC and XLR 2 x Analog, 2 x AES/EBU, 2 x SDI emb. 600 Ω or >20 kΩ balanced >50 dB, 1 kHz -6 to +24 dBu, 500 mdBu increments >15 dB, 0.1 to 6.0 MHz 0.5 to 2 Vpp nominal 48 kHz 2 to 7 Vpp nominal, min. 500 mV 2 x stereo / 4x mono @ BNC 32 kHz, 44.1 kHz and 48 kHz 110 Ω balanced >21 dB, 0.1 to 6.0 MHz

2 20 bits SMPTE 272M 48 kHz (locked to video) Audio decompression Audio codecs MPEG-1 Layer II, AAC-LC, HE-AACv1, HE-AACv2, Dolby Digital pass through Sample rates 48 khz AAC-LC and HE-AAC bit rates variable, 14 to 320 kbit/s AAC-LC and HE-AAC single mono, stereo, dual channel, single encoding modes mono, joint stereo Dolby Digital AC-3 pass through

Video decompression MPEG-4 AVC Part 10 (H.264) & MPEG-2 MP@ML Decoding level up to MP@L4 Processing HD/SD video down conversion Aspect ratio 16:9 and 4:3; auto mode based on WSS or VII Decoding rate 0.3 to 15 Mbit/s (SD) 4 to 30 Mbit/s (HD) with ASI* up to 200 Mbit/s H Resolutions 1920,1440,1280, 720, 704, 544, 528, 480 and 352 and any other resolution V Resolutions 1080i, 720p, 576, 480 and lower resolution Chroma format 4:2:0 / 4:2:2* Decoding rate 0.5 to 45 Mbit/s Mode DVB-S / DVB-S2 Connector 2 x L-Band input with LNB control Frequency Range 950-2150 Mhz RF Input Level -65 to -25 dBm LNB Power 12DVC 350 mA Transport Stream INPUT Interface DVB-S Input F-type 75 Ohm connector Constellation QPSK Symbol Rate 1-45 Msym/s FEC Any ratios compliant with standards DVB-S2 Input F-type 75 Ohm connector Constallation QPSK, 8PSK Symbol Rate 1-45 Msym/s FEC Any rations compliant with standardsRol Roll Off 0.25 and 0.35 Pilots On & Off Mode VCM, CCM ASI Input Connector 1 x ASI @75 Ohm TS max Bit Rate 200 Mbit/s EN50083-9 Packet Size 188/204 IP Input IP format Multicast, unicast Connector Eight-pin RJ-45, MDI 10/100/1GB interface Format MPEG-2 TS over UDP & RTP TS streaming Up to 5 single or multiprogram streams TS packet Length 188 bytes, 204 RS on, 204 RS off Conditional Access Interface Two CI slots allowing descrambling of up to 2 x TS @EN-50221 CAS Irdeto, Conax, Viacess BISS None, BISS-1, BISS-E

Management interface Front panel Protocol Latency Loop back IP forwarding

*optional

Control and Management Ethernet 10/100/GB Base-T on RJ-45 LCD 2 lines character display with menu and input keys WEB, SNMP, RS-232 Special Features < 160 ms decoder only, 400 ms end to end (encoder-decoder) from ASI IN and Tuner (demodulated) Unicast and multicast IP forwarding to max. 2 different IP adresses

Environmental 482.6 x 44.5 x 393 mm 0 to +45°C 3.7 kg Forced cooling with air flow from back and side AC / DC Power 100 to 240 V AC ±10% , dual -48 VDC ± 10%* 47 to 63 Hz ≤ 40 W (110 V), ≤ 40 W (220 V) ≤ 40 W (-48 V DC)

Dimensions (W x H x D) Operation temperature range Weight Cooling Voltage range Line frequency Power consumption subject can change without notice version 01-2011

*optional

IRD connector panel (AC version)

Ordering information Description EDBoX HYDRUS DHD IRD AVC & MPEG2 Decoder Broadcast H.264 AVC & MPEG-2 MP@ML realtime SD/HD IRD decoder, DVB-S/S2 demodulator-tuner, symbolrate 1Mbps to 45 Mbps, S2 QPSK and 8PSK, BISS-1, BISS- E decryption 1 x ASI IN , 2 x ASI OUT 88/204, 0,2-55 Mpbs Resolution up to 1080i . TS / RTP over IP up to 50Mbps, Video Out simultaneous CBVS/SDI (CVBS only on SD), Audio out analog +4db XLR (2CHA), AES-EBU XLR (2CHA), SDI embedded up to to 4 CHA, Web Based Management, 2 Lines frontpanel, AAC HE v1/v2 & MPEG 1 Layer II audio decoding Firmware options 4:2:2 chroma format for EDBoX Hydrus IRD (EDB98): firmware optional to support 4:2:2 chroma format encoding Hardware options

The EDBOX Hydrus IRD Web-Interface » Event logging, enhanced messaging and alarming mechanism » Improved intuitive user-interface design » Overall unit status display, audio/video signal loss detection and alarming,

EDBOX Hydrus IRD Remote Web-Interface: PID selection

Powered by: KIRNexus GmbH Franz-Xaver-Heilig-Str. 7 · 88630 Pfullendorf · Germany Fon +49 7552 92280-0 · Fax +49 7552 92280-32 info@edbox.tv · www.edbox.tv

Order Number EDB98

EDB132