Video & Fiber Optic
SatLink SL-2150
FIBER OPTIC TRANSPORT
2150MHZ L-BAND FIBER OPTIC LINK
SUMMARY
The SL-2150 L-Band fiber optic link is ideal for connecting antennas with control rooms, network operation centers or broadcast head ends. The SL-2150 links offer more than an alternative to coaxial cabling in teleport earth stations.
The SL-2150 has been designed to provide very low carrier-to-noise ratio and extremely linear performance. This means a cost effective technically superior installation for the satellite signal user. MultiDyne systems have been engineered to give industry-leading performance when compared with any other fiber optic link on the market.
Only SL-2150 links have ultra wide dynamic range so that auto gain control is not required to cope with changing signal intensity caused by meteorological conditions.
A range of options to suit a variety of installations is offered, such as 75 Ohm or 50 Ohm impedance with either BNC or F connectors. The standard link utilizes a high performance DFB laser, but for less demanding short haul applications, a lower cost FP laser option is available. For installations where the number of cross site fiber connections is limited, the complete ITU range of CWDM transmitter wavelengths is offered allowing up to 8 channels to be carried on one fiber. Optical connector options include ST, LC, FC, or LC APC.
The SL-2150 is an L-Band RF to optical fiber signal conversion module based in a standard 1/3 of rack enclosure that takes power from either a 12V brick adapter or any source in a range from 9 to 24V DC as could be a battery. 1RU, three unit rack kit also avalable.
FEATURES
•L-Band RF 950-2150 Mhz to optical fiber signal conversion
•Up to 50Km range using DFB optics, Fiber Perot optics optional •9 dB RF gain from FTX to FRX •20 dB Noise Figure
•LNB power up to 400mA
•Long Line Compensation (LCC) feature for LNB power
•LNB selectable polarity using 13V or 18V power
CONTACT
1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
SPECIFICATIONS
•LO Hi band selector using 22 KHz tone
•75 Ohm F or 50 Ohm BNC connectors
•ST, LC, FC, or LC APC optical connectors
•Universal 9 to 24V DC power source independently of LNB Power needs. •Front Display for Power, Alarm, Laser, Optical Level, Polarization, LO selection, and LLC selection.
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic
SPECIFICATIONS
Dimensions (LxWxH) Weight (Each end) Operating Temperature Range Storage Temperature Range Frequency Range Flatness IMD CNR Gain Stability RF Link Gain Noise Figure Link budget (Standard DFB)
Transmitter (-FTX) Power: Wavelength (Standard DFB) Wavelength (CWDM or 1550nm option) Optical Power Optical Connector RF Input Return Loss LNB voltages (LCC off) LNB voltages (LCC on) Universal LNB (LO control) Indicators Receiver (-FRX) Power: Wavelength Optical Sensitivity Optical Connector RF Output Return Loss Max Input Power Indicators
7.09"x5.57"x1.52" (141x180x37mm) 24 oz (0.68Kg) 0° C to +50°C -20° C to +70°C 950 – 2150 MHz +/- 1.25 dB -62 dBc 56 dB 0.25 dB 9dB +/- 3dB 20 dB 20dB or up to 50Km 9-24V / 10W 1310nm Single Mode 1470 to 1610nm 4.5 dBm APC ST, FC, SC, or LC F 75 Ohms / BNC 50 Ohms >15dB 13V Vert. / 18V Hor. 14V Vert. / 19V Hor. 22 KHz Power, Alarm, 22KHz, Polarity, Display for Laser, Long Line Comp. (LLC) 9-24V / 5W 1100 to 1600nm -16dBm APC ST, FC, SC, or LC F 75 Ohms / BNC 50 Ohms >15dB +15dBm Display for Power, Alarm, and Optical Power
Specifications are subject to change without notice.
CONTACT
1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic Systems
FIBER OPTIC TRANSPORT
EOS-4000 SERIES Electro-Optical Routing Switcher for 4.25 Gbps Fiber Optic Video Transport
EOS-4000 in 16, 32, 64, 144 & 288 Chassis
SUMMARY • Routing Switch for Digital Optical Signals.
• Scalable Chassis of 16 x 16, 32 x 32, 64 x 64,
• Ideal for switching DVI Single & Dual Link, HDMI, RGB-HV, Digital Video, SDI, HD-SDI, 3G HD-SDI and all future standards up to 10 Gbps. • Fully SMPTE Compliant when using SMPTE SFP optics. • Supports SMPTE 424M 1080p 3 Gbps HD-SDI; SMPTE 292M 1.485 Gbps and SMPTE 259M 270 Mbps standards. • Full Matrix, Non-blocking Routing Switcher.
144 x 144 and 288 X 288. • Scalable 10 Gbps XFP I/O Blade for future migration to 10 Gbps Video transport. Includes 4 XFP ports per blade. • Scalable I/O blades in increments of 16 ports. • Hot-swapable I/O Blades, Power supplies, Network management module, XFP & SFP transceivers
• Point to Multi-Point or Multicast; One Wavelength; One Direction • Support for AMX and Crestron control via RS232 or
• Scalable SFP I/O ports from 1-16 per I/O blade. • WebX, an embedded web GUI that controls switches remotely form a web browser over a network. Utilizes
Ethernet IP
SSL for security.
• Bandwidth through SFP ports of 4.25 Gbps.
• Redundant power supplies
APPLICATION DIAGRAM
Typical EOSͲ4000 Configuration HD-3000
HD-3000 FTX FTX FTX
FTX
EOS-4064-CHAS 64-Port
FTX
FTX FTX FTX
FRX
FRX
FRX FRX
FRX
FRX
FRX
FRX
CONTACT 1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic Systems
INTRODUCTION The EOS-4000 Series of electro-optical routing switchers are a versatile, multipurpose, non-blocking, transparent switch that provides high-speed switching between ports with minimal effect on overall network latency. The EOS-4000 series is capable of switching digital optical signals of up to 4.25Gbps via SFP and up to 10 Gbps via XFP. Fiber Optic transport systems from MultiDyne today support transport rates up to 4.25Gbps. There is an engineering road map for fiber transport systems that will support 10Gbps in the future. The EOS-4000 is scalable in size and scalable in bandwidth to support future 10 Gbps technology in the future.
The EOS-4000 is designed to accept a 4.25 Gbps modular IO interface blades with up to 16 SFP Small Form-Factor Pluggable transceiver modules per blade. Each SFP transceiver module provides the physical ports for one input-output pair. Different types of SFP transceivers support a variety of network configurations: • 4.25, 2.5, 2.125, 1.25 and 1.0625 Gb/s • 850, 1300 and 1550nm optical media
EOS-4144 144 by 144 Port Switch
• CWDM coarse wave-division multiplexing optics supported • CDWDM dense wave-division multiplexing optics supported The EOS-4000 is designed to accept a 10 Gbps modular IO interface blades with up to 9 XFP 10G Small Form-Factor Pluggable transceiver modules per blade. Each SFP transceiver module provides the physical ports for one input-output pair. Different types of XFP transceivers support a variety of network configurations: • 10, 4.25, 2.5, 2.125, 1.25 and 1.0625 Gb/s • 850, 1300 and 1550nm optical media • CWDM coarse wave-division multiplexing optics supported • CDWDM dense wave-division multiplexing optics supported
SFP Interface IO Blade for EOS Series with 16 SFP Ports at 4.25 Gbps
The EOS-4000 supports hot-swappable power supplies, fans and port cards to allow users to quickly replace parts without affecting system investigate performance. The EOS4000 controlling software and non-volatile configuration data resides on the module. FIBER OPTIC VIDEO SWITCHING Today's signal management demands higher bandwidths and longer transport distances. With SDI, HD-SDI, 3G HD-SDI, DVI Single and Dual Link the transport data rates can range from 270 Mbps to 10 Gbps. These high bit rates limit the transport distance to as little as 10 meters in some applications. Fiber optics is the only solutions for high bandwidth, long distance video transport. Once we have all our video signals in the optical domain, optical switching is the next logical step. Signal integrity, security and quality are maintains by remaining in the optical domain. Electrical routing switcher for high bandwidth signals, such as DVI Dual Link, do not exist on the market in any scalable size.
XFP Interface IO Blade for EOS Series with 4 XFP Ports at 10 Gbps
The EOS-4000 Series of Electro-optical routings switchers are ideal fro all your routing switcher needs. By switching optically, one routing switcher can support all your your video formats. There is no need for a separate switcher for your many different formats of video, HD and audio. One optical switcher can switch all your signals. As long as the signal is digital and optical, the EOS-4000 can switch it. CONTROL CAPABILITIES The EOS4000 configuration commands are sent via a 10/100 Ethernet or RS232 connection using a simple intuitive command set. With regard to network testing, some of the most significant capabilities are:
CONTACT 1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic Systems
SPECIFICATIONS EOS Series Fiber Optic Switcher 72, 144 and 288 Ports with Scalable Modular Chassis
EOS-4016-CHAS
EOS-4032-CHAS
EOS-4064-CHAS
EOS-4144-CHAS
EOS-4288-CHAS
EOS-16PORTSFP EOS-SNMP-V3
SFP-850-MM-SR-4G SFP-1310-SM-SR-4G
SFP-1310-SM-SR-2.5G SFP-1310-SM-IR-2.5G SFP-1310-SM-LR-2.5G SFP-1550-SM-IR-2.5G SFP-1550-SM-LR-2.5G
SFP-1310-SM-SR-1.5G SFP-1310-SM-SR-3G
SFP-BNC-HDSDI-TX SFP-BNC-HDSDI-RX
Modular, 16-port, 1 Blade, Electro-Optical Switcher Chassis 4.25Gbps with two redudant 90-240VAC power supply. Includes Standard controller card with dual 10/100/1000 management ports WebX Software Command Line Interface (Version 3) • SSL and SSH encryption Redundant Power Supplies 1 Rack-unit (Requires 1 EOS-16PORTSFP) Modular, 32-port, 2 Blade, Electro-Optical Switcher Chassis 4.25Gbps with two redudant 90-240VAC power supply. Includes Standard controller card with dual 10/100/1000 management ports WebX Software Command Line Interface (Version 3) • SSL and SSH encryption Redundant Power Supplies 2 Rack-units (Requires up to 2 EOS-16PORTSFP) Modular, 64-port, 4 Blade, Electro-Optical Switcher Chassis 4.25Gbps with two redudant Hot Swappable 90-240VAC power supply. Includes Standard controller card with dual 10/100/1000 management ports WebX Software Command Line Interface (Version 3) • SSL and SSH encryption Redundant Power Supplies 3 Rack-units (Requires up to 4 EOS16PORTSFP) Modular, 144-port, 9 Blade, Electro-Optical Switcher Chassis 4.25Gbps with two redudant Hot Swappable 90-240VAC power supply. Includes Standard controller card with dual 10/100/1000 management ports WebX Software Command Line Interface (Version 3) • SSL and SSH encryption Redundant Power Supplies 6 Rack-units (Requires up to 9 EOS16PORTSFP) Modular, 288-port, 18 Blade, Electro-Optical Switcher Chassis 4.25Gbps with two redudant Hot Swappable 90240VAC power supply. Includes Standard controller card with dual 10/100/1000 management ports WebX Software Command Line Interface (Version 3) • SSL and SSH encryption Redundant Power Supplies 11 Rack-units. (Requires up to 18 EOS-16PORTSFP) EOS Series SFP I/O Port Blade and Network Management Module 16 Port, SFP Interface, Multi-rate Blade for EOS Series Chassis with 16-SFP Ports, Hot swappable ( Requires up to 16 SFP-XXXX-XX-XX-XXXX as listed below) (SDI, HD-SDI and 3G HD-SDI switchers require either SFP-1310-SMSR-1.5G or SFP-1310-SM-SR-3G) SNMP V3 (Gets/Sets/Traps) Option - per Switch for EOS Series Telecom 4G SFP Small Form Pluggable Optical Transceivers for the EOS Series Small Form Pluggable (SFP) 4Gbps, Telecom, 850nm Multimode Optical Transceivers, Short Range, 200 meters, two LC Connectors Small Form Pluggable (SFP) 4Gbps, Telecom, 1310nm Singlemode Optical Transceivers, Short Range, 2KM, two LC Connectors Telecom 2.5G SFP Small Form Pluggable Optical Transceivers for the EOS Series Small Form Pluggable (SFP) 2.5Gbps, Telecom, OC-48, 1310nm Singlemode Optical Transceivers, Short Range, 2KM, two LC Connectors Small Form Pluggable (SFP) 2.5Gbps, Telecom, OC-48, 1310nm Singlemode Optical Transceivers, Short Range, 15KM, two LC Connectors Small Form Pluggable (SFP) 2.5Gbps, Telecom, OC-48, 1310nm Singlemode Optical Transceivers, Short Range, 40KM, two LC Connectors Small Form Pluggable (SFP) 2.5Gbps, Telecom, OC-48, 1550nm Singlemode Optical Transceivers, Short Range, 40KM, two LC Connectors Small Form Pluggable (SFP) 2.5Gbps, Telecom, OC-48, 1550nm Singlemode Optical Transceivers, Short Range, 80KM, two LC Connectors SMPTE 1.5G or 3G SFP Small Form Pluggable SDI, HD & 3G HD Optical Transceivers for the EOS Series Small Form Pluggable (SFP) 1.5Gbps, SMPTE, 1310nm Singlemode Optical Transceivers, Optimized for SDI, HD-SDI, Short Range, 24KM, two LC Connectors Small Form Pluggable (SFP) 1.5Gbps, SMPTE, 1310nm Singlemode Optical Transceivers, Optimized for SDI, HD-SDI, Short Range, 24KM, two LC Connectors SFP Small Form Pluggable BNC SDI and HD-SDI Transcoder for the EOS Series Unidirectional BNC Digital Video SFP, 8B/10B Encoder, Dual Rate SDI (270Mbps) and HD-SDI (1.485 Gbps) TX Only. SMPTE standard I/O. Non-SMPTE fiber transport. One BNC input connector. Unidirectional BNC Digital Video SFP, 8B/10B Decoder, Dual Rate SDI (270Mbps) and HD-SDI (1.485 Gbps) RX Only. SMPTE standard I/O. Non-SMPTE fiber transport. One BNC input connector.
CONTACT 1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic FIBER OPTIC TRANSPORT
HD-3500PRELIMINARY 1.5G or 3Gb/s Transport with Audio and Bi-directional Data over Single Fiber
SUMMARY 3.0 Gbps Multirate Serial Digital Video Fiber Optic Transceiver, 4 Audio or 2 AES Audio with ability to transcode between AES and Analog, Bi-directional Stereo Audio for intercom with Bi-directional RS232/RS422/RS485, 4 GPIO channels, and Tally. Supports 5 2970 Mb/s, SDI, HD-SDI, 3G HD-SDI, DVB ASI, SMPTE 424M,292M/259M/310M, EQ and Reclocker; 1310nm TX, 1491nm TX and 1551nm RX; Stand-alone & Rack-mountable, wall-mount power supply included. Supports embedded audio. (May require -RM6 & BLANK) (Includes wall-mount power supply) (Specify ST, LC or FC Connectors)
FEATURES • 5M to 3G 1080p Multirate HD-SDI Video version available • Lower costs 5M to 1.5G 1080i Multirate HD-SDI Video version available
SPECIFICATIONS • Provides an economical solution for the fiber optic transport of 5 Mbps to 3 Gbps HDTV signals.
• Audio input supports 2 AES Digital or 4 Analog Audio Channels
• Ideal for high definition video and audio transport with supplemental machine control and robotic camera pan-tilt-zoom (PTZ)
with transcoding. Analog in, AES out or visa-versa.
• Supports the SMPTE 424M 1080p 3 Gbps HD-SDI standard.
• Two Bi-Directional Serial Data Channels, RS-232/422/485
• Supports the SMPTE 292M 1.485 Gbps standard.
• Two Auxiliary Audio Channels for 4 wire Intercom
• Supports the SMPTE 259M 270 Mbps standard.
• 1 Tally (bidirectional) with contact relay out.
• Supports the SMPTE 310M 19.4 Mbps, M2S or DVB-ASI 270Mbps, SMPTE 344M 540 Mbps and SMPTE 305M SDTi rates.
• Supports 4 GPI and 1 Tally/Relay • Available in Stand-alone Portable configuration with optional Triple Rack Kit (-RMT) • Available as modular card for the openGear frame
The HD-3500 provides a multi-rate high definition fiber optic transport link for up to 1080p 3G HD-SDI. The system also supports 2 channels of outbound digital AES Audio or 4 analog audio channels with 2 bidirectional auxiliary audio channels for 4 wire intercom. A separate 2 wire to 4 wire intercom bridge may be required. The HD-3500 also supports 2 bidirectional RS-232 or RS 422 data channels as well as 4 GPI and 1 tally. The HD-3500 is ideal for broadcast facility for moving high definition video as well as analog or digital audio intercom GPI and tally. The data and GPI channels can be used to control equipment in remote locations. The tally relay can be used to control a camera tally lights or the tally relay can be used for other types of control. The HD-3500 can also be used for remote camera control in the studio or for high definition surveillance cameras outdoors. The system is in use by NASA to broadcast space shuttle launches in high definition video where the data channels are used for pan tilt and zoom or PTZ control.
CONTACT 1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic
SPECIFICATIONS 3 Gbps, Multirate, Serial Digital Video Fiber Optic Transmitter Unit I/Os: One coaxial input, One re-clocked loop-through One fiber optic output LED indicators for Data Rate, HD, Lock and Power Input: Type: 1 BNC. Impedance: 75 Ohms. Return Loss: >18dB up to 270MHz. Output: 1 BNC Re-clocked Loopthrough Output. Fiber Output: Type: ST, LC or FC. Wavelength: 1310 Singlemode or Multimode. Power: -12 dBm. 3 Gbps, Multirate, Serial Digital Video Fiber Optic Receiver • Unit I/O’s: One fiber optic input Two re-clocked coaxial outputs LED indicators for Data Rate, HD, Lock and Power Fiber Input: Type: ST, LC or FC. Wavelength: 1310nm. Sensitivity: -20 dBm. Output: Type: 2 BNC. Return loss: >18dB up to 270MHz.
AES Audio Specs Inputs: Balanced, AES3 /AES3 id Input Impedance ............................................................................ 110 Ohms / 75 Ohm(setting), +/-20%, 0.1MHz to 6.0MHz. Minimum Input Signal .................................................................... 200mV for 50% of cell period. Maximum Input Signal .................................................................. 10 Vpp. Outputs: Balanced, AES3/AES3 id. Output Impedance .........................................................................110 Ohms/ 75 Ohm(setting),, +/-20%, 0.1MHz to 6.0MHz. Output Voltage............................................................................... 2.0 to 7.0 Vpp into 110Ohms. Rise/Fall Time................................................................................ 5 to 30 ns, 30 to 40ns for 75 Ohm (10% to 90%). Jitter ............................................................................................... <20ns. Analog Audio Specs Audio Performance: Signal to noise ................................................................................> 90 dB Frequency response to 20 Hz to 20 KHz........................................< +/- 0.1 dB Distortion..........................................................................................< 0.05 % Audio range level adjustable ...........................................................28, 16, 10 or 4 dBu for F.S. Maximum input & output level, 600 Ohm termination .....................28 dBu Audio output impedance, balanced..................................................50 Ohms Audio input impedance, balanced (selectable) ...............................600 Ohms or High
CONTACT 1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic FIBER OPTIC TRANSPORT
the
HalfCuBE
Fiber Optic Field Transport HD, Composite, Audio, Ethernet, Data PL, IFB, Bi-Directional & Battery Operated COMPATIBLE WITH: All MultiDyne products. MADE IN USA FEATURES & BENEFITS • Portable. Carry with one hand. • Up to 32 HD Signals • Up to 128 Audio Channels • Intercom, PL belt pack support • Almost all MultiDyne products can be integrated • Run on battery or AC supply • Anton Bauer or IDX mounting plate • Singlemode or multimode configurations • Optical connectors include ST, SC, LC as well as TFOCA, PH, Tyco Expanded Beam & Neutrik opticalCon • Can be linked with another HalfCube, LiGHTCuBE, LiGHTBoX or any MultiDyne product
SUMMARY The MultiDyne LiGHTCuBE is designed for field applications with a very high signal count. Typical applications are ENG, sports, military, annouce booth and any field application where battery powered equipment is required. The HalfCuBE can be linked via tactical fiber cable to any MultiDyne product. The LiGHTCuBE is fully customizable, offering virtually any signal compilation. Think of the HalfCuBE as a portable rackmount kit with an I/O panel. Just pick and choose from almost any of the MultiDyne, off the shelf, fiber optic units and we will integrate them into your HalfCuBE. Then just grab it by the handle and head out to your next event.
COMPATIBLE PRODUCTS AND SIGNALS
TS-12-HD:
HD-3000: HD-1500: DVM-2500: DVM-2000: DVM-3000: DVM-2700: RGB-5000: DVI-6000:
Test Signal Option, SDI, HD-SDI, or 3G HD-SDI Operation, Copper and SM Fiber Outputs, Genlock Option, Embedded Audio Test Tones, Test Signals: 100% Bars, SMPTE Bars, RP219 Bars , Pathological Matrix, Y/C Ramp, Luma Ramp, Pulse & Bar, Flat Field, Logo Image Overlay, the output can be a static test pattern or the unit can cycle through available test patterns. 3.0 Gbps Multirate Serial Digital Video Fiber Optic Transmitter, 5 - 2970 Mb/s, SDI, HD-SDI, 3G HD-SDI, DVB ASI, SMPTE 424M,292M/259M/310M/297-2006. 1.5 Gbps Multirate Serial Digital Video Fiber Optic Transmitter, 5 - 1485 Mb/s, SDI, HD-SDI, DVB ASI, SMPTE 292M/259M/310M. 1 video, 8 audio and 2 data channel with tally, Bi-di, Fiber Optic, Transceiver; exceeds RS-250C Short-haul specs. 12 bit Video, 6 Ch. of 24 bit Audio and 3 Ch. of RS232 Data, Fiber Optic Transport; exceeds RS-250C Short-haul specs. 12 bit Video Fiber Optic Transmitter; exceeds RS-250C Short-haul specs, with 8 bi-directional Data Channels, Supports RS-232, RS-422 and RS-485 jumper selectable and 2 Bi-directional Voice Channels. 2 video, 8 audio ch., Fiber Optic Transmitter; exceeds RS-250C Short-haul specs. with 1310nm MM & SM. Digital RGB and WUXGA Fiber Optic Transmitter, Singlemode, -10dBm, 1 fiber, loop-through HD15 inputs, 1920 X 1200, supports all sync formats, RGB HV, RGsB, YsUV, YcCrCb, UXGA, SUXGA and UXGA, Component and Analog HDTV signals. DVI Single Link & RGB-HV, WUXGA, 1920 x 1200, ONE Fiber, Singlemode, Transmitter with Stereo Audio, 1 LC Connector, up to 4KM distance.
CONTACT 1-(877)-MULTIDYNE (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic FIBER OPTIC TRANSPORT
the
LiGHTCuBE
Fiber Optic Field Transport HD, Composite, Audio, Ethernet, Data PL, IFB, Bi-Directional & Battery Operated COMPATIBLE WITH: All MultiDyne products. MADE IN USA FEATURES & BENEFITS • Up to 80 HD Signals • Up to 225 Audio Channels • Intercom, PL belt pack support • Almost all MultiDyne products can be integrated • Run on battery or AC supply • Anton Bauer or IDX mounting plate • Singlemode or multimode configurations • Optical connectors include ST, SC, LC as well as TFOCA, PH, Tyco Expanded Beam & Neutrik opticalCon • Can be linked w/ another LiGHTCuBE, LiGHTBoX or any MultiDyne product
SUMMARY The MultiDyne LiGHTCuBE is designed for field applications with a very high signal count. Typical applications are ENG, sports, military, annouce booth and any field application where battery powered equipment is required. The LiGHTCuBE can be linked via tactical fiber cable to any MultiDyne product. The LiGHTCuBE is fully customizable, offering virtually any signal compilation. Think of the LiGHTCuBE as a portable rackmount kit with an I/O panel. Just pick and choose from almost any of the MultiDyne, off the shelf, fiber optic units and we will integrate them into your LiGHTCuBE. Then just grab it by the handles and head out to your next event.
COMPATIBLE PRODUCTS AND SIGNALS
TS-12-HD:
HD-3000: HD-1500: DVM-2500: DVM-2000: DVM-3000: DVM-2700: RGB-5000: DVI-6000:
Tes Signal Option, SDI, HD-SDI, or 3G HD-SDI Operation, Copper and SM Fiber Outputs, Genlock Option, Embedded Audio Test Tones, Test Signals: 100% Bars, SMPTE Bars, RP219 Bars , Pathological Matrix, Y/C Ramp, Luma Ramp, Pulse & Bar, Flat Field, Logo Image Overlay, the output can be a static test pattern or the unit can cycle through available test patterns. 3.0 Gbps Multirate Serial Digital Video Fiber Optic Transmitter, 5 - 2970 Mb/s, SDI, HD-SDI, 3G HD-SDI, DVB ASI, SMPTE 424M,292M/259M/310M/297-2006. 1.5 Gbps Multirate Serial Digital Video Fiber Optic Transmitter, 5 - 1485 Mb/s, SDI, HD-SDI, DVB ASI, SMPTE 292M/259M/310M. 1 video, 8 audio and 2 data channel with tally, Bi-di, Fiber Optic, Transceiver; exceeds RS-250C Short-haul specs. 12 bit Video, 6 Ch. of 24 bit Audio and 3 Ch. of RS232 Data, Fiber Optic Transport; exceeds RS-250C Short-haul specs. 12 bit Video Fiber Optic Transmitter; exceeds RS-250C Short-haul specs, with 8 bi-directional Data Channels, Supports RS-232, RS-422 and RS-485 jumper selectable and 2 Bi-directional Voice Channels. 2 video, 8 audio ch., Fiber Optic Transmitter; exceeds RS-250C Short-haul specs. with 1310nm MM & SM. Digital RGB and WUXGA Fiber Optic Transmitter, Singlemode, -10dBm, 1 fiber, loop-through HD15 inputs, 1920 X 1200, supports all sync formats, RGB HV, RGsB, YsUV, YcCrCb, UXGA, SUXGA and UXGA, Component and Analog HDTV signals. DVI Dual Link & RGB-HV, WQXGA, 2560 x 1600, ONE Fiber, Singlemode, Transmitter with Stereo Audio, 1 LC Connector, up to 4KM distance.
CONTACT 1-(877)-MULTIDYNE (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic FIBER OPTIC TRANSPORT
the
LiGHTBoX
LB1430
Fiber Optic Field Transport HD, Composite, Audio, Ethernet & Data Battery Operated & Bi-Directional COMPATIBLE WITH: All MultiDyne products. MADE IN USA
FEATURES & BENEFITS • Fully configurable. • Almost all MultiDyne products can be integrated. • Extremely rugged case. • Run on battery or AC supply. • Anton Bauer or IDX mounting plate • Singlemode or multimode configurations. • Optical connectors include ST, SC, LC as well as TFOCA, PH, Tyco Expanded Beam & Neutrik. • Can be linked w/ another LiGHTBoX or any MultiDyne product.
SUMMARY The MultiDyne LiGHTBoX1430 is designed for field and harsh environment applications. Typical applications are ENG, sports, military and any field application where battery powered equipment is required. The LiGHTBox can be linked via tactical fiber cable to any MultiDyne product. The LiGHTBoX is fully customizable offering virtually any signal compilation. Think of the LiGHTBoX-1430 as a portable rackmount kit with an I/O panel. Just pick and choose from almost any MultiDyne, off the shelf, fiber optic units and we will integrate them into your LiGHTBoX. Then just grab it by the handle and head out to your next event.
COMPATIBLE PRODUCTS AND SIGNALS
HD-3000: HD-1500: DVM-2500: DVM-2000: DVM-3000: DVM-2700: RGB-5000: DVI-6000:
3.0 Gbps Multirate Serial Digital Video Fiber Optic Transmitter, 5 - 2970 Mb/s, SDI, HD-SDI, 3G HD-SDI, DVB ASI, SMPTE 424M,292M/259M/310M/297-2006. 1.5 Gbps Multirate Serial Digital Video Fiber Optic Transmitter, 5 - 1485 Mb/s, SDI, HD-SDI, DVB ASI, SMPTE 292M/259M/310M. 1 video, 8 audio and 2 data channel with tally, Bi-di, Fiber Optic, Transceiver; exceeds RS-250C Short-haul specs. 12 bit Video, 6 Ch. of 24 bit Audio and 3 Ch. of RS232 Data, Fiber Optic Transport; exceeds RS-250C Short-haul specs. 12 bit Video Fiber Optic Transmitter; exceeds RS-250C Short-haul specs, with 8 bi-directional Data Channels, Supports RS-232, RS-422 and RS-485 jumper selectable and 2 Bi-directional Voice Channels. 2 video, 8 audio ch., Fiber Optic Transmitter; exceeds RS-250C Short-haul specs. with 1310nm MM & SM. Digital RGB and WUXGA Fiber Optic Transmitter, Singlemode, -10dBm, 1 fiber, loop-through HD15 inputs, 1920 BY 1200, supports all sync formats, RGB HV, RGsB, YsUV, YcCrCb, UXGA, SUXGA and UXGA, Component and Analog HDTV signals. DVI Dual Link & RGB-HV, WQXGA, 2560 x 1600, ONE Fiber, Singlemode, Transmitter with Stereo Audio, 1 LC Connectors, up to 4KM distance
CONTACT 1-(877)-MULTIDYNE (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic Systems FIBER OPTIC TRANSPORT
the
SilverBULLET
Mini 3G HD/SDI Fiber Optic Link
SUMMARY
The SilverBULLET is an economic solution designed for transmission of SDI and HD–SDI TV signals on single mode fiber optic cable. Perfect for today’s professional and broadcast applications. At just three inches in length, this cost–effective solution is ideal for a wide variety of pro A/V and broadcast applications, including video production and editing, ENG with additional uses for sports teleproduction, field production, remote camera links, cross–campus production, pre–fibered venues and courtesy feeds. -An economical solution for the fiber optic transport of 5 Mbps to 3 Gbps HDTV signals -Supports the SMPTE 424M 2.97Gbps, SMPTE 292M 1.485 Gbps and SMPTE 259M 270 Mbps standards -Typical Link Distance over Single Mode is 30KM -Typical Link Distance over Multi Mode: 3G 300m, 1.5G 500m, 270M 1km -Rugged die cast/over molded construction -Error free pathological pattern operation -Power 5-16 VDC with 4 Pin XLR
CONTACT 1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic Systems FIBER OPTIC TRANSPORT Technical Specification: Video Transmission method Input level Input Impedance Coax Equalization
Digital 800 mV (peak to peak) 75 ohms @ 270 Mbps 350m @ 1.485 Gbps 140m @ 2.97 Gbps 50m* Output Impedance 75 ohms Bit-Error Rate(@-20dBm) 10-11 Jitter (pathological data pattern) < 120 ps Rise/Fall Times < 120 ps * - Typical equalized length of Belden 1694A cable: 120m at 2.97Gb/s, 200m at 1.485Gb/s, and 350m at 270Mb/s. Transmission Operating wavelength Video connector in/out Optical connector Optical Source Optical detector Transmitter output Receiver sensitivity Link Margin/Distance using single mode fiber Fiber type
1300nm, 1550nm or 1470nm to 1610nm CWDM BNC ST single mode (standard) FP, DFB or CWDM Laser Diode PIN-TIA Diode -6 dBm (0~+3 dBm optional) -20 dBm 13 dB/5 km@3G (1310nm) 20 dB/30 km@3G (1550nm or CWDM Laser Diode) Single mode or multimode
Mechanical/Environmental Dimensions (LxWxH) Weight, each end Input Voltage Power connector Power Consumption, each end Indicators Temperature Range, operating Humidity Range 0 to 95%RH, non-condensing
3.2" x 0.65" x 0.75" (8.13 x 1.65 x 1.91 mm) 2.5 oz (70 g) 5~16 VDC XLR 4 PIN 600mW Power, signal, link, optical power 25째 C to +55째C
the POWER CLIP 4 pin XLR or 2 pin Power Tap adaptor. Power the SilverBULLET directly from the camera or battery. (SB-PC-XLR or SB-PC-PT)
CONTACT 1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic Systems FIBER OPTIC TRANSPORT
HDMI-ONE HDMI-ONE HDMI & DVI Fiber Optic Link with HDCP / EDID
SUMMARY -Uncompressed DVI-D over ONE multimode fiber -Supports up to WUXGA 1920 x 1200, Single Link -Bi-directional communication over ONE fiber for full HDCP copyright and EDID functionality -HDCP encoding remains intact and unmodified -Fully un-compressed, 100% transparent, No Frame Dropping -Ideal for applications with multiple monitor resolutions and a routing switcher
MultiDyne Video & Fiber Optic Systems introduces the HDMI–ONE, a low–cost HDMI and DVI fiber link with HDCP copyright protection support. Designed to extend HDMI and DVI distance limitations, this cost–effective solution is the first to offer users bi–directional communication over ONE fiber for full HDCP copyright and EDID functionality. Recognizing the need for high–resolution graphics and video image transfer over long distances, MultiDyne’s HDMI–ONE focuses on maximizing visual quality, with pixel–for–pixel image transport and a 100 percent 24–bit scan rate and no contouring or bit reduction. The fully un–compressed HDMI or DVI–D signal is transported over ONE fiber supporting WUXGA up to 1920x1200 and is 100 percent transparent with no frame dropping. MultiDyne’s HDMI–ONE also responds to market demand for a locking HDMI–connector, seamlessly transporting the HDCP and EDID information along with the HDMI or DVI video signal. DVI signals are supported by the HDMI–ONE with the use of a hybrid cable adapter. When the HDMI–ONE is used to transport DVI signals, the HDCP and EDID information is transported seamlessly from the monitor to the video source despite the use of hybrid adapter cables. The product also allows transmissions of up to 1000 meters over multi–mode fiber and ensures that the HDCP encoding remains intact and unmodified throughout the entire process. This new offering targeted at HDMI users is compatible with all HDMI compliant sources and monitors, while continuing to maintain the original electrical HDMI signal. Designed to support all possible horizontal and vertical sync configurations, it also includes built–in security features for secure video and audio communications in command and control facilities. The lack of EMI characteristics also makes the HDMI–ONE ideal for medical instruments and airborne applications. The HDMI–ONE includes external power supplies and a USB power port. Alternatively, a free USB port can be used from the video source to power the HDMI–ONE transmitter and a USB port on the monitor can power the HDMI–ONE receiver, eliminating the need for two external power supplies. MultiDyne’s new HDMI and DVI fiber link can be configured for a wide variety of applications including medical and MRI displays, advertising and signage, sporting and concert video displays, video walls, digital cinema, radar displays, air traffic control, military information and displays as well as in the commodity and stock exchanges.
CONTACT 1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic Systems
FIBER OPTIC TRANSPORT
DVI-5000 MULTIMODE SERIES DVI-D Single & Dual Link and Stereo Audio Fiber Optic Transport over ONE or TWO Multimode fiber
DVI-5000 DVI Fiber Link over ONE Fiber Pictured above
SUMMARY å WQXGA, 2560 x 1600 resolution over TWO fibers with Dual Link Model, DVI-5000-FT/RX-DL-2-SC å WUXGA, 1920 x 1200 resolution over ONE fiber with Single Link Model, DVI-5000-FT/RX-2-SC å Loop-through DVI-D Input with Dual DVI-D outputs. å Optional Stereo Audio and Bi-directional Data path. å Fully Uncompressed. No Color Space Compression. No Frame Dropping. No Color Depth Bit Reduction. No Scaling. å 100% 24 Bit, All Scan Rates, No Contouring at High Scan Rates with No Reduced Blanking. Supports CRT and LCD monitors å Support of the EDID Monitor Resolution information from loop-through or internal emulation.
å Input Cable Equalizer supports a DVI input cable of up to 50 meters with 24 gauge cable. Output Re-clocker eliminates noise and distortion in the DVI output. å Supports all possible H and V synch configurations. å No EMI characteristics for medical instrumentsand airborne applications. å Keep your Video and Audio communications secure in Command and Control Facilities å Provides electrical isolation, immune to electrical noise in the transmission path. å Application include commodity and stock exchanges, medical and MRI displays, advertising and signs, sporting and concert video displays, video walls, digital cinema, radar displays, air traffic control, military information displays plus many more…
APPLICATION DIAGRAM DVI-5000 DVI Single Link Fiber Optic Transmitter
DVI-5000 DVI Single Link Fiber Optic Receiver 1 Multimode Fiber, up to 1KM
DVI Single Link Input Options for Stereo Audio & Data
DVI Single Link Loopthru Output
DVI-5000 DVI Single Link Multimode Fiber Transport
Flat screen
Options for Stereo Audio & Data
Two DVI Single Link Outputs
Flat screen
Flat screen
Tower
DVI-5000-DL DVI Dual Link Fiber Optic Transmitter
DVI-5000-DL DVI Dual Link Fiber Optic Receiver 2 Multimode Fibers, up to 1KM
DVI Dual Link Input Options for Stereo Audio & Data
DVI Dual Link Loopthru Output
DVI-5000 DVI Dual Link Multimode Fiber Transport
Flat screen
Two DVI Dual Link Outputs
Flat screen
Options for Stereo Audio & Data
Flat screen
Tower
1-(877)-MULTIDYNE (US and Canada)
sales@multidyne.com
www.multidyne.com
SPECIFICATIONS VIDEO SIGNAL Input, -FTX Output, -FRX Standards Supported DVI Single Link, DVI-5000-FT/RX-2-SC DVI Dual Link, DVI-5000-FT/RX-DL-2-SC Video Color Depth Pixel Clock Resolution DVI Single Link, DVI-5000-FT/RX-2-SC DVI Single Link, DVI-5000-FT/RX-DL-2-SC
2 DVI-D or HDMI(with adapter), Input with Loop-through 2 DVI-D or HDMI(with adapter) outputs DVI-D Single Link 640 x 480 @ 60Hz through 1920 x 1200 @ 60Hz; HDTV signals at 480i, 480p, 720p, 1080i, and 1080p. DVI-D Dual Link 640 x 480 @ 60Hz through 2560 x 1600 @ 60Hz; HDTV signals at 480i, 480p, 720p, 1080i, and 1080p. 24 bits with No Compression and No Scaling at all resolutions 25 to 165 MHz 640 x 480 @ 60 Hz through 1920 x 1200 @ 60 Hz 640 x 480 @ 60 Hz through 2560 x 1600 @ 60 Hz
AUDIO Input, -FTX Output, -FRX Audio Maximum Level S/N THD
Stereo, unbalanced, 3.5MM mini-jack; balanced on 9 pin Din Stereo, unbalanced, 3.5MM mini-jack; balanced on 9 pin Din +10 dBu 90 dB 0.005%
DATA Input and Output Baud Rate
1 channel, Selectable RS232, RS422, RS495; 9 pin Din 9600 Baud
OPTICAL Number of Optical Fibers Fiber Type Connector Wavelength Singlemode, DVI-5000-FT/RX-2-SC Singlemode, DVI-5000-FT/RX-DL-2-SC Operating Distance, Emitter Type
1 Single Link; 2 Dual Link Standard Multimode 50 or 62.5μm Multi-mode. ST, FC, SC or LC; Industry Standard, Non-Proprietary Connector 850nm 850nm up to 1 KM over 50μm Multi-mode Laser
OTHER Dimensions (L x W x H) 7” L x 5 3/4 W x 1 3/4 H Triple Rack-mount Kit, 3 modules (Part number -RMT) 7” L x 19” W x 1 3/4 H Power consumption 15 Watts
ORDERING INFORMATION DVI-5000 Series DVI Single Link, 1920 x 1200, Fiber Optic Transport System, ONE Fiber, Multimode (SIN 58-6) DVI-5000-FTX-2-SC
DVI Single Link, WUXGA, 1920 X 1200, Single Fiber, Multimode, Transport System with Stereo Audio and Data, SC Connector, 1KM distance
DVI-5000-FRX-2-SC
DVI Single Link, WUXGA, 1920 X 1200, Single Fiber, Multimode, Transport System with Stereo Audio and Data, SC Connector, 1KM distance DVI-5000 Series DVI Dual Link Fiber Optic, 2560 x 1600, Transport System, TWO Fibers, Multimode (SIN 58-6)
DVI-5000-FTX-DL-2-SC
DVI Dual Link, WQXGA, 2560 x 1600, Dual Fiber, Multimode, Transport System with Stereo Audio and Data, SC Connector, 1KM distance
DVI-5000-FRX-DL-2-SC
DVI Dual Link, WQXGA, 2560 x 1600, Dual Fiber, Multimode, Transport System with Stereo Audio and Data, SC Connector, 1KM distance
-RMT -BLANK TRI-PS-5VDC
Options and Accessories for DVI-5000 and DVI-4000 Series Triple Rack-mount Kit (1 kit) Blank panel for rack-mounting kit Triple Power Supply, 5VDC, 6 Amps used to power up to three DVI-5000
Video & Fiber Optic Systems
1-(877)-MULTIDYNE (US and Canada) 1-(877)-685-8439 1-(516)-671-7278
FAX 1-(516)-671-3362 sales@multidyne.com www.multidyne.com
191 Forest Avenue Locust Valley, NY 11560-2132 USA
Video & Fiber Optic Systems FIBER OPTIC TRANSPORT
DVI-6000 SERIES DVI Single & Dual Link, RGB-HV, & Stereo Audio Fiber Optic Transport over ONE fiber Preliminary
SUMMARY • Transport DVI-I, RGB-HV and DVI-D Single and Dual Link over ONE fiber.
• Ideal for applications with multiple monitor resolutions and a routing switcher.
• WQXGA, 2560 x 1600 maximum resolution.
• No EMI characteristics for medical instruments and airborne applications.
• Loop-through DVI-I Input with Dual DVI-I outputs. • Optional Stereo Audio • Throughput Bandwidth, 4.25 Gbps. • Optical transport support for SMPTE 292M 1.485 HD-SDI and SMPTE 424M 3G HD-SDI. (Future firmware update). • EOS-4000 Electro-Optical Switcher support at 4.25Gbps. HD & 3G HD Switcher support at 1.485 and 2.97 Gbps. • Fully Uncompressed for resolutions up to 1920 x 1200. • Adaptive bandwidth reduction for resolutions above 1920 x 1200. Blend of Color Space Compression and Frame Dropping. • Adaptive algorithm detects high and low motion content and adapts accordingly. • No Reduced Blanking. Supports CRT and LCD monitors • Uses Standard Fiber Optic Cable. No Custom or Nonstandard Cabling and Connectors required. • Support of the EDID Monitor Resolution information from loop-through or internal emulation. • Input Cable Equalizer supports a DVI input cable of up to 50 meters with 24 gauge cable.
• Keep your Video and Audio communications secure in Command and Control Facilities • Enables remoting of a monitor from the video source. • Supports all possible horizontal and vertical synch configurations. • Provides electrical isolation, immune to electrical noise in the transmission path • Systems available with Keyboard, Mouse and Audio support. • Application include commodity and stock exchanges, medical and MRI displays, advertising and signs, sporting and concert video displays, video walls, digital cinema, radar displays, air traffic control, military information displays plus many more… • The DVI-6000 is ideally suited to sending high quality, high resolution (up to 2560 X 1600) digital video over fiber. This unique fiber transport system let your high resolution monitor extend up to 10 KM away from the video source. Applications include plasma displays, video walls for advertising, MRI and medical display and radar displays.
• Output Re-clocker eliminates noise and distortion in the DVI output.
CONTACT 1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
SPECIFICATIONS VIDEO SIGNAL Input, -FTX Output, -FRX Standards Supported
1 DVI-I; DVI-D, RGB-HV or HDMI(with adapter) Loop-through input 2 DVI-I; DVI-D, RGB-HV or HDMI(with adapter) outputs DVI-I Single Link 640 x 480 @ 60Hz through 2560 x 1600 @ 60Hz; HDTV signals at 480i, 480p, 720p, 1080i, and 1080p. 25 to 165 MHz
Pixel Clock AUDIO Input and Output Audio Maximum Level S/N THD
2 channels, Stereo, unbalanced, 3.5MM mini-jack +10 dBu 90 dB 0.005%
OPTICAL Number of Optical Fibers Fiber Type
1 Standard Multimode 50/125 or 62.5/125 µm or Singlemode 8.3/125 µm. No Custom or Non-standard Cabling required. LC; Industry Standard, Non-Proprietary Connector
Connector Wavelength Multimode, DVI-6000-FTX-2 Singlemode, DVI-6000-FTX-50, -52, -53 Operating Distance, (-50) SM Operating Distance, (-52) SM Operating Distance, (-2) MM
850 nm 1310 nm up to 4 KM over 9/125 µm up to 10 KM over 9/125 µm up to 150m on 50/125 µm, 70m on 62.5/125 µm MMF
OTHER Dimensions Triple Rack-mount Kit for 3 modules, -RMT Power consumption
(L x W x H) 7” L x 5 3/4 W x 1 3/4 H 7” L x 19” W x 1 3/4 H 15 Watts
SPECIFICATIONS DVI-6000 Series DVI Single Link, 2560 x 1600, Fiber Optic Transport System, 6 Fiber, Multimode (SIN 58-6) DVI-6000-FTX-2-LC
DVI Dual Link & RGB-HV, WQXGA, 2560 x 1600, ONE Fiber, Multimode, Transmitter with Stereo Audio and Data, 1 LC Connectors, up to 500 meter distance
DVI-6000-FRX-2-LC
DVI Dual Link & RGB-HV, WQXGA, 2560 x 1600, ONE Fiber, Multimode, Receiver with Stereo Audio and Data, 1 LC Connectors, up to 500 meter distance DVI-6000 Series DVI Single Link, 2560 x 1600, Fiber Optic Transport System, 6 Fiber, Singlemode (SIN 58-6)
DVI-6000-FTX-50-LC
DVI Dual Link & RGB-HV, WQXGA, 2560 x 1600, ONE Fiber, Singelmode, Transmitter with Stereo Audio and Data, 1 LC Connectors, up to 4KM distance
DVI-6000-FRX-50-LC
DVI Dual Link & RGB-HV, WQXGA, 2560 x 1600, ONE Fiber, Singelmode, Receiver with Stereo Audio and Data, 1 LC Connectors, up to 4KM distance Options and Accessories for DVI-6000 Series
-RMT
Triple Rack-mount Kit (1 kit)
-BLANK
Blank panel for rack-mounting kit
TRI-PS-5VDC
Triple Power Supply, 5VDC, 6 Amps used to power up to three DVI-6000
CONTACT 1-(800)-4TV-TEST (US and Canada) 1-(800) 488-8378 1-(516)-671-7278 FAX 1-(516)-671-3362
191 Forest Avenue Locust Valley, NY 11560-2132 E-Mail:sales@multidyne.com Web Site: www.multidyne.com
Video & Fiber Optic Systems
FIBER OPTIC TRANSPORT
M-LINK SERIES Rugged, Facility and Field Deployable Fiber Optic Cable Assemblies
MultiDyne M-LINK™ FLEXIBLE INTER-CONNECT SYSTEM Perhaps the most innovative fiber optic and electrical inter-connect solution to come along in years, MultiDyne has introduces the M-LINK™ connector family, the ultimate configurable fiber optic or hybrid (combination fiber optic and electrical) inter-connect solution to meet the majority of commercial, industrial and military application needs. This Patented (pending) connector platform starts with configurable pin or socket insert caps which can be added to either plug or receptacle. A series of modules are then provisioned into either male or female cavities to form an active channel for fiber pins, fiber optic sockets, electrical pins, electrical sockets or dummy modules to seal un-wanted cavities. Combined with M-LINK™ hybrid cable or fiber optic cable style back shells, the M-LINK™ system can also accommodate any configuration up to 32 channels, with any combination of fiber optic or #16 AWG electrical contacts. Connectivity Environment: MIL Specification References: Channel Count: Description: Termini Information:
HYBRID/FIBER OPTIC FIXED NETWORK PROPRIETARY 2 - 7 CHANNELS MultiDyne HIGH PERFORMANCE MULTI-CHANNEL FIBER OPTIC INTER-CONNECT SYSTEM M-LINK™ FIBER OPTIC TERMINI
M-Link Rugged Connector and Fan-out Assembly
M-Link Rugged Receptacle
1-(877)-MULTIDYNE (US and Canada)
sales@multidyne.com
www.multidyne.com
SPECIFICATIONS
MultiDyne P/N
DESCRIPTION
MDA-x-yy-ww-A110z
7CH - M-LINK™ PLUG, MALE W/STRAIGHT BACKSHELL
MDB-x-yy-ww-A110z
7CH - M-LINK™ PLUG, FEMALE W/STRAIGHT BACKSHELL
MDC-x-yy-ww-A100N
7CH - M-LINK™ IN-LINE RECEPTACLE, MALE
MDD-x-yy-ww-A100N
7CH - M-LINK™ IN-LINE RECEPTACLE, FEMALE
MDE-x-yy-ww-A100N
7CH - M-LINK™ PANEL MNT RECEPTACLE, MALE
MDF-x-yy-ww-A100N
7CH - M-LINK™ PANEL MNT RECEPTACLE, FEMALE
MDG-x-yy-ww-A100N
7CH - M-LINK™ JAM NUT RECEPTACLE, MALE
MDH-x-yy-ww-A100N
7CH - M-LINK™JAM NUT RECEPTACLE, FEMALE
MTP2042DD01
M-LINK™, FIBER OPTIC TERMINI, NON-GENDER, 1.25mm FERRULE
MUV164016AA
PIN CONTACT, ELECTRICAL, 16 #AWG
MUV164116AA
SOCKET CONTACT, ELECTRICAL, 16 #AWG
DESCRIPTION (x) = n, NOT USED (x) = 1, 16 AWG W/O GRD (x) = 2, 16 AWG W/ GRD (x) = 3, 10 AWG W/O GRD (x) = 4, 10 AWG W/ GRD (yy) = 01-07 ELECTRICAL (ww) = 01-07 FIBER OPTIC (z) = A, "0.190 –
Video & Fiber Optic Systems
1-(877)-MULTIDYNE (US and Canada) 1-(877)-685-8439 1-(516)-671-7278
FAX 1-(516)-671-3362 sales@multidyne.com www.multidyne.com
191 Forest Avenue Locust Valley, NY 11560-2132 USA