PA3200Lite Patchable Distribution Amps •Up to 32 1-in by 5-out PatchAmps •Compact Design •Eliminates DA trays, Cabling and Connectors •3Gb HD, HD, SD, Analog Video, AES and Analog Audio Formats •Signal Monitoring is Standard •Lightweight •Low Power Consumption 4 (2x32) patchbays with integrated distribution amplifiers
PA901 distribution amplifier with patches
rear panel SPECIFICATIONS Mechanical PA3200Lite Height Width Depth Nominal Weight
7 inches (4RU) 19 inches 16 inches 38 lbs. FULLY LOADED
The PatchAmp PA3200Lite Video frame houses (4) 2x32 patch panels integral to 32 DA cards in 4RU weighing just under 40 lbs. The PatchAmp PA-901HD 1x4 video distribution amplifier is multi-rate upto 3Gig, guaranteeing that every signal is equalized and reclocked at the patch bay. The SDI and analog video distribution amplifiers are available in 1x5 configurations.
Electrical PA3200Lite Input Connectors Number of inputs Number of outputs
Differential and Isolated BNC, 75 ohm up to 32 up to 160
PATCHING & DISTRIBUTION TECHNOLOGY
Power Type Input Voltage Redundancy Power Factor EMI
External, 48Vdc 90-264 Vac, 47-63 Hz, Single Phase N+1, hot swappable modules >.99 complies with EN55022 & FCC Class A
PatchAmp 20 East Kennedy Street Hackensack, New Jersey 07601 phone (201) 457-1504 fax (201) 457-1507 www.patchamp.com
Patchable Distribution Amplifier Model: PA-901Lite - Single 1x4 - True 75 ohm coaxial in and out - Auto equalizing - Multi-rate reclocking up to 3GB - Supports all HD/SD formats - Removes high frequency jitter - Compatible with PA3200Lite - Lock and EQ warning indicators - Signal meter and fault outputs Technical Specifications: Input Number of Inputs 1 Input Connection 75 Ohm BNC Input Impedance 75 Ohm Input Return Loss >18dB up to 1.5GHz Signal Level 800mV +/-10% Output Channels Outputs per Channel Output Connection Output Impedance Output Return Loss
Single 4 75 Ohm BNC 75 Ohm >18dB up to 1.5GHz
Performance Standards Data Rates Max Cable Length Equalization Mode Reclocking Signal Level DC Offset Rise & Fall Time Overshoot Wideband Jitter
SMPTE 424M, 292M, 259M, 344M 143, 177, 270, 360, 540, 1483.5, 1485, 2970 Mb/s 230 ft. @ 2.97 Gb/s Belden 1684A 460 ft. @ 1.485 Gb/s Belden 1684A 1,150 ft. @ 270Mb/s Belden 1694A Automatic Multi-Rate Multi-Rate 800mV Nominal 0V +/-0.5V 200ps nominal < 10% of amplitude < 0.2 UI
BLOCK DIAGRAM
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601 201-457-1504 Fax: 201-457-1507 www.patchamp.com
Patchable Distribution Amplifier Model: PA-902Lite - 1 x 5 Expansion Module - True 75 ohm coaxial in and out - Auto equalizing - Multi-rate reclocking up to 3GB - Supports all HD/SD formats - Removes high frequency jitter - Compatible with PA3200Lite - Lock and EQ warning indicators - Signal meter and fault outputs Technical Specifications: Input Number of Inputs 1 Input Connection 75 Ohm BNC Input Impedance 75 Ohm Input Return Loss >18dB up to 1.5GHz Signal Level 800mV +/-10% Output Channels Outputs per Channel Output Connection Output Impedance Output Return Loss
Single 4 Patched 1 Direct 75 Ohm BNC 75 Ohm >18dB up to 1.5GHz
Performance Standards Data Rates Max Cable Length Equalization Mode Reclocking Signal Level DC Offset Rise & Fall Time Overshoot Wideband Jitter
SMPTE 424M, 292M, 259M, 344M 143, 177, 270, 360, 540, 1483.5, 1485, 2970 Mb/s 230 ft. @ 2.97 Gb/s Belden 1684A 460 ft. @ 1.485 Gb/s Belden 1684A 1,150 ft. @ 270Mb/s Belden 1694A Automatic Multi-Rate Multi-Rate 800mV Nominal 0V +/-0.5V 200ps nominal < 10% of amplitude < 0.2 UI
BLOCK DIAGRAM
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601 201-457-1504 Fax: 201-457-1507 www.patchamp.com
Patchable Distribution Amplifier Model: PA-903Lite - Single 1x5 - True 75 ohm coaxial in and out - Auto equalizing - Polarity matched input/ouput - Multi-rate reclocking up to 3GB - Supports all HD/SD/ASI formats - Removes high frequency jitter - Compatible with PA3200Lite - Lock and EQ warning indicators - Signal meter and fault outputs Technical Specifications: Input Number of Inputs 1 Input Connection 75 Ohm BNC Input Impedance 75 Ohm Input Return Loss >18dB up to 1.5GHz Signal Level 800mV +/-10% Output Channels Outputs per Channel Output Connection Output Impedance Output Return Loss
Single 5 75 Ohm BNC 75 Ohm >18dB up to 1.5GHz
Performance Standards Data Rates Max Cable Length Equalization Mode Reclocking Signal Level DC Offset Rise & Fall Time Overshoot Wideband Jitter
SMPTE 424M, 292M, 259M, 344M 143, 177, 270, 360, 540, 1483.5, 1485, 2970 Mb/s, ASI 230 ft. @ 2.97 Gb/s Belden 1684A 460 ft. @ 1.485 Gb/s Belden 1684A 1,150 ft. @ 270Mb/s Belden 1694A Automatic Multi-Rate Multi-Rate 800mV Nominal 0V +/-0.5V 200ps nominal < 10% of amplitude < 0.2 UI
BLOCK DIAGRAM
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601 201-457-1504 Fax: 201-457-1507 www.patchamp.com
Patchable Distribution Amplifier Model: PA-101Lite - Used for analog video or AES audio - True 75 ohm coaxial in and out - Auto equalizing and reshaping for AES audio - passive or active loopthrough - Compatible with PA3200Lite - Signa present indicators - Signal meter and fault outputs Technical Specifications: Input Number of Inputs Input Connection Input Impedance Input Return Loss
BLOCK DIAGRAM 1 Patched 75 Ohm BNC 75 Ohm >40dB to 5MHz
Output Channels Outputs per Channel Output Connection Output Impedance Output Return Loss
Single 3 Patched 2 Direct 75 Ohm BNC 75 Ohm >40dB to 5MHz
Performance Standards Equalization Range Max.Signal Level Differential Phase Differential Gain S/N Propagation Delay Power
Analog video or AES audio 250 ft. belden 1694a for video 1000 ft. for AES audio 2.5 Vp-p centered at 0VDC < 0,15% < 0.15% > 70 dB 15nS < 5 Watts
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601 201-457-1504 Fax: 201-457-1507 www.patchamp.com
PA10032 VIDEO PATCHAMP FRAME Up to 64 1-in by 4-out distribution amps per frame Also can be configured as 1-in by 9-out All connections betweeen DAs and jacks are internal Frame houses HD/SD sdi, AES audio and Analog Video See thru front cover allows quick status indication Light weight only 100 lbs per system Low power consumption and integrated cooling Alarm relay and meter voltage outputs 75 ohm wired midplane for optimum performance
The Rack Saver
SPECIFICATIONS Mechanical PA10032 Height Width Depth Nominal Weight
24.5 inches (14RU) 19 inches 16 inches 100 lbs. FULLY LOADED
The PA10032 is a 14RU frame specifically designed to eliminate the hassles of installing and wiring large scale coaxial distribution systems. By the virtue of itâ&#x20AC;&#x2122;s patented design; this pre-wired system signifcantly reduces the rack space required when compared to the older style systems. It also eliminates all wiring between the patchbays and distribution amplifiers.
Electrical connectors Number of inputs Number of outputs Power
bnc or 16 channel mult up to 64 up to 256
Type Input Voltage Redundancy Power Factor EMI
External, 48Vdc 90-264 Vac, 47-63 Hz, Single Phase N+1, hot swappable modules >.99 complies with EN55022 & FCC Class A
PATCHING & DISTRIBUTION TECHNOLOGY
PatchAmp 20 East Kennedy Street Hackensack, New Jersey 07601 phone (201) 457-1504 fax (201) 457-1507 www.patchamp.com
PA1600HD VIDEO DISTRIBUTION FRAME Up to 32 1-in by 4-out distribution amps per frame Compact design offers high module density Accepts all patchamp high density modules Wideband frame houses aes, sd-sdi, and hd-sdi Signal metering and monitoring is standard See thru front cover allows quick status indication
SPECIFICATIONS Mechanical PA1600HD Height Width Depth Nominal Weight
7 inches (4RU) 19 inches 16 inches 26 lbs. FULLY LOADED
The PA1600HD is a 4RU frame which houses the same high density dual 1x4 video distribution amplifiers as the PA-10032 pre-wired systems. This universal frame employs a true 75 ohm midplane for optimum performance for all coaxial signals.
Electrical PA1600HD Input Connectors Number of inputs Number of outputs
Unbalanced BNC, 75 ohm up to 32 up to 128
Power Type Input Voltage Redundancy Power Factor EMI
External, 48Vdc 90-264 Vac, 47-63 Hz, Single Phase N+1, hot swappable modules >.99 complies with EN55022 & FCC Class A
PATCHING & DISTRIBUTION TECHNOLOGY
PatchAmp 20 East Kennedy Street Hackensack, New Jersey 07601 phone (201) 457-1504 fax (201) 457-1507 www.patchamp.com
PA3200HD VIDEO DISTRIBUTION FRAME Up to 64 1-in by 4-out distribution amps per frame Also can be configured as 1-in by 9-out Compact design offers high module density Accepts all patchamp high density modules Wideband frame houses analog, sd-sdi, and hd-sdi Signal metering and monitoring is standard See thru front cover allows quick status indication Lightest weight per distribution amplifier Lowest power consumptiom per distribution amplifier
SPECIFICATIONS Mechanical PA3200HD Height Width Depth Nominal Weight
7 inches (4RU) 19 inches 16 inches 38 lbs. FULLY LOADED
The PA3200HD is a 4RU frame specifically designed to reduce the amount of rack space housing video distribution amplifiers. One 4RU PA3200HD replaces four 2RU old style trays. This universal frame employs a true 75 ohm midplane for optimum performance for all coaxial signals.
Electrical PA3200HD Input Connectors Number of inputs Number of outputs
Differential and Isolated BNC, 75 ohm up to 64 up to 288
Power Type Input Voltage Redundancy Power Factor EMI
External, 48Vdc 90-264 Vac, 47-63 Hz, Single Phase N+1, hot swappable modules >.99 complies with EN55022 & FCC Class A
PATCHING & DISTRIBUTION TECHNOLOGY
PatchAmp 20 East Kennedy Street Hackensack, New Jersey 07601 phone (201) 457-1504 fax (201) 457-1507 www.patchamp.com
DUAL HD/SD Distribution Amplifier Model: PA-6000-402 - Dual 1x4 or single 1x7 - True 75 ohm coaxial in and out - Auto equalizing - Multi-rate reclocking - Supports all hd/sd formats - Removes high frequency jitter - Compatible with PA3200HD, and PA10032A - Lock and eq. warning indicators - Signal meter and fault outputs Technical Specifications: Input
BLOCK DIAGRAM
Number of Inputs 2 Input Connection 75 Ohm BNC Input Impedance 75 Ohm Input Return Loss >18dB up to 1.5GHz Signal Level 800mV +/-10% Output Channels Outputs per Channel Output Connection Output Impedance Output Return Loss
Single or Dual Single-7, Dual-4 75 Ohm BNC 75 Ohm >18dB up to 1.5GHz
Performance Standards Data Rates Max Cable Length Equalization Mode Reclocking Signal Level DC Offset Rise & Fall Time Overshoot Wideband Jitter
SMPTE 292M, 259M, 344M Compliant 143, 177, 270, 360, 540, 1483.5, 1485Mb/s 460 ft. @ 1.485 Gb/s Belden 1684A 1,150 ft. @ 270Mb/s Belden 1694A Automatic Multi-Rate Multi-Rate 800mV Nominal PATCHING & DISTRIBUTION TECHNOLOGY 0V +/-0.5V 200ps nominal 20 East Kennedy Street, Hackensack, NJ 07601 < 10% of amplitude 201-457-1504 Fax: 201-457-1507 < 0.2 UI
www.patchamp.com
Video Distribution Amplifier Model:PA-6000-310 - Dual 1x4 or single 1x9 - True 75 ohm coaxial in and out - equalizing - hum canceling differential inputs - Supports video, bilevel ref, tri-level ref, aes word clock and 6Hz ref - Compatible with PA3200HD, and PA10032A - Video loss indicators - Signal meter and fault outputs Technical Specifications: Input Number of Inputs 2, Differential Input Connection 75 Ohm BNC Input Impedance 75 Ohm Input Level 1 Vp-p nominal Max. Input Level 2.5 Vp-p centered at 0V Input Return Loss >40dB up to 5MHz Common Mode 10 Vp-p CMRR >40dB to 10kHz Output Channels Single or Dual Outputs per Channel Single-9, Dual-4 Output Connection 75 Ohm BNC Output Impedance 75 Ohm Output Return Loss >40dB up to 5MHz Phase Match < +/- 0.2 @ 3.58MHz Output Isolation > 35 dB @ 5 MHz Performance Gain Range Frequency Response Differential Gain Differential Phase Line Rate Window Tilt Field Rate Window Tilt S/N Hum Propagation Delay Overshoot Equalization Range Response
+/- 3dB < +/- 0.05dB to 5 MHz +/- 0.2dB @ 20MHz > -3dB @ 120MHz typically (10-90% APL) < 0.15% (10-90% APL) < 0.15% < 0.20% < 0.20% > 70dB <1mVp-p 15 +/- 1.0nS < 10% of amplitude 250ft. Belden 1694A Cable < +/- 0.05dB to 5 MHz
BLOCK DIAGRAM
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601 201-457-1504 Fax: 201-457-1507 www.patchamp.com
PA3200 VIDEO DISTRIBUTION FRAME Up to 32 1-in by 5-out distribution amps per frame Compact design offers high module density Accepts all patchamp standard density modules Wideband frame houses analog, sd-sdi, and hd-sdi Signal metering and monitoring is standard See thru front cover allows quick status indication
SPECIFICATIONS Mechanical PA3200HD Height Width Depth Nominal Weight
7 inches (4RU) 19 inches 16 inches 34 lbs. FULLY LOADED
The PA3200 is a 4RU frame which houses the same standard density 1x5 video distribution amplifiers as the PA-5024 and PA-5032 prewired systems. This universal frame employs a true 75 ohm midplane for optimum performance for all coaxial signals.
Electrical PA3200HD Input Connectors Number of inputs Number of outputs
Differential and Isolated BNC, 75 ohm up to 32 up to 160
Power Type Input Voltage Redundancy Power Factor EMI
External, 48Vdc 90-264 Vac, 47-63 Hz, Single Phase N+1, hot swappable modules >.99 complies with EN55022 & FCC Class A
PATCHING & DISTRIBUTION TECHNOLOGY
PatchAmp 20 East Kennedy Street Hackensack, New Jersey 07601 phone (201) 457-1504 fax (201) 457-1507 www.patchamp.com
PA2400Lite Patchable Distribution Amps •Up to 24 1-in by 5-out Stereo PatchAmps •Compact Design •Eliminates DA trays, Cabling and Connectors •Stereo Analog Audio •Signal Monitoring is Standard •Lightweight •Low Power Consumption 4 (2x24 stereo) patchbays with integrated distribution amplifiers
rear panel SPECIFICATIONS Mechanical PA2400Lite Height Width Depth Nominal Weight
7 inches (4RU) 19 inches 16 inches 28 lbs. FULLY LOADED
Electrical PA3200Lite Input Connectors Number of inputs Number of outputs
The PatchAmp PA2400Lite Audio frame houses (4) 2x24 patch panels integral to 24 DA cards in 4RU weighing just under 30 lbs. The frame is 4RU high with E3 rear connections. The PatchAmp PA-501HD is a 1x5 stereo analog audio distribution amplifier with an AGC and compressor/limiter.
>30K Ohms, balanced or 600 Ohms E3 up to 24 stereo up to 120 stereo
PATCHING & DISTRIBUTION TECHNOLOGY
Power Type Input Voltage Redundancy Power Factor EMI
PA501 distribution amplifier with patches
External, 48Vdc 90-264 Vac, 47-63 Hz, Single Phase N+1, hot swappable modules >.99 complies with EN55022 & FCC Class A
PatchAmp 20 East Kennedy Street Hackensack, New Jersey 07601 phone (201) 457-1504 fax (201) 457-1507 www.patchamp.com
Patchable Distribution Amplifier Model: PA-501Lite - Stereo 1x5 - AGC/Compressor-Limiter - Standard Bantam Patches - Programmable normals - On board ground lifters - Compatible with PA2400ALite - Audio level indicators - Signal meter and fault outputs
Technical Specifications: Input Impedance Max. Level Common Mode Range CMR
>30K Ohms, balanced or 600 Ohms Balanced +26dBu (66Ohms), +22dBm (600Ohms) +/-20V >90dB @ 60Hz, >60dB @ 20KHz
Output Channels Outputs per Channel Impedance Max. Level Output to Output Isolation
Stereo (1x5) 5 66 Ohms, 150 Ohms, or 600 Ohms +26dBu (66Ohms), +22dBm (600Ohms) >70dB, 20Hz to 20kHz
Performance Gain Range
-6 to +33dB >100dB @ unity gain 20Hz -20 kHz <Âą0.05dB, 20Hz - 20 kHz, rel. to 1kHz, any level up to +26dBu (66 ohms), +22dBm (600 ohms) Total Harmonic Distortion <0.01%, 20Hz - 20 kHz @ +26dBu (66 ohms), +22dBm (600 ohms) Isolation between Modules >100dB, 20Hz - 20 kHz S/N Ratio Frequency Response
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601 201-457-1504 Fax: 201-457-1507 www.patchamp.com
PA10048A AUDIO PATCHAMP FRAME Up to 96 1-in by 4-out distribution amps per frame Also can be configured as 1-in by 9-out All connections betweeen DAs and jacks are internal Jumper configurable normals and grounds Frame houses AES and Analog See thru front cover allows quick status indication Light weight only 100 lbs per system Low power consumption and integrated cooling Alarm relay and meter voltage outputs 110 ohm wired midplane for optimum performance
The Labor Saver SPECIFICATIONS Mechanical PA10048A Height Width Depth Nominal Weight
24.5 inches (14RU) 19 inches 16 inches 100 lbs. FULLY LOADED
The PA10048A is a 14RU frame specifically designed to eliminate the hassles of installing and wiring large scale audio distribution systems. By the virtue of itâ&#x20AC;&#x2122;s patented design; mis-wiring, loose wires, shorts, phase reversals, bad grounds, etc., simply do not exist.
Electrical Connectors Number of inputs Number of outputs
USER SPECIFIED, 110 ohm up to 96 up to 384
Power Type Input Voltage Redundancy Power Factor EMI
External, 48Vdc 90-264 Vac, 47-63 Hz, Single Phase N+1, hot swappable modules >.99 complies with EN55022 & FCC Class A
PATCHING & DISTRIBUTION TECHNOLOGY
PatchAmp 20 East Kennedy Street Hackensack, New Jersey 07601 phone (201) 457-1504 fax (201) 457-1507 www.patchamp.com
PA1600AHD AUDIO DISTRIBUTION FRAME Up to 64 1-in by 4-out distribution amps per frame using only 16 cards Also can be configured as 1-in by 9-out Compact design offers high module density Accepts all patchamp high density modules Frame houses AES and Analog See thru front cover allows quick status indication Lightest weight per distribution amplifier Lowest power consumptiom per distribution amplifier
SPECIFICATIONS Mechanical PA1600AHD Height Width Depth Nominal Weight
7 inches (4RU) 19 inches 16 inches 21 lbs. FULLY LOADED
The PA1600AHD is a 4RU frame specifically designed to reduce the amount of rack space housing audio distribution amplifiers. One 4RU PA1600AHD replaces at least four 2RU old style trays. This universal frame houses 16 cards and employs a 110-ohm wired midplane for optimun performance for all twisted pair audio signals.
Electrical PA1600AHD Connectors Number of inputs Number of outputs
Elco 3-pin, 110 ohm up to 64 up to 288
Power Type Input Voltage Redundancy Power Factor EMI
External, 48Vdc 90-264 Vac, 47-63 Hz, Single Phase N+1, hot swappable modules >.99 complies with EN55022 & FCC Class A
PATCHING & DISTRIBUTION TECHNOLOGY
PatchAmp 20 East Kennedy Street Hackensack, New Jersey 07601 phone (201) 457-1504 fax (201) 457-1507 www.patchamp.com
PA2400AHD AUDIO DISTRIBUTION FRAME Up to 96 1-in by 4-out distribution amps per frame using only 24 cards Also can be configured as 1-in by 9-out Compact design offers high module density Accepts all patchamp high density modules Frame houses AES and Analog See thru front cover allows quick status indication Lightest weight per distribution amplifier Lowest power consumptiom per distribution amplifier
SPECIFICATIONS Mechanical PA2400AHD Height Width Depth Nominal Weight
7 inches (4RU) 19 inches 16 inches 25 lbs. FULLY LOADED
The PA2400AHD is a 4RU frame specifically designed to reduce the amount of rack space housing audio distribution amplifiers. One 4RU PA2400AHD replaces at least four 2RU old style trays. This universal frame houses 24 cards and employs a 110-ohm wired midplane for optimun performance for all twisted pair audio signals.
Electrical PA2400AHD Connectors Number of inputs Number of outputs
Elco 90-pin, 110 ohm, SAC Wiring up to 96 up to 384
Power Type Input Voltage Redundancy Power Factor EMI
External, 48Vdc 90-264 Vac, 47-63 Hz, Single Phase N+1, hot swappable modules >.99 complies with EN55022 & FCC Class A
PATCHING & DISTRIBUTION TECHNOLOGY
PatchAmp 20 East Kennedy Street Hackensack, New Jersey 07601 phone (201) 457-1504 fax (201) 457-1507 www.patchamp.com
AES Distribution Amplifier Model: PA-6000-302 - Quad 1x4 or dual 1x9 - 110 ohm xfmr in and out - Auto equalizing - Data re-shaping - Supports all AES formats - Eighteen outputs per module - Compatible with PA3200AHD, PA5048A and PA10048A - Signal presence indication for each channel Technical Specifications: BLOCK DIAGRAM
Input Impedance Coupled, Balanced Max. Level
110 Ohms Transformer 2 – 7V p-p
Output Channels Quad (1x4) or Stereo (1x9) Outputs per Channel 4 (1x4) or 9 (1x9) Impedance 110 Ohms Transformer Coupled Max. Level 4 – 5V p-p Auto-equalizing Performance Max Cable Length (Belden 1800B) Equalization Mode Reshaping Jitter Propagation Delay
2,000 ft. Twisted Pair Automatic Yes < 5 ns < 100 ns
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601 201-457-1504 Fax: 201-457-1507 www.patchamp.com
Audio Distribution Amplifier Model: PA-6000-502 -
Quad 1x4 or dual 1x9 Flexible in/out impedance Virtually transparent +26 dBm output level Very low noise (100dB S/N) Eighteen outputs per module Compatible with PA3200AHD, PA5048A and PA10048A - VU meter indication for each channel
Technical Specifications: Input Impedance Max. Level Common Mode Range CMR
BLOCK DIAGRAM >30K Ohms, balanced or 600 Ohms Balanced +26dBu (66Ohms), +22dBm (600Ohms) +/-20V >90dB @ 60Hz, >60dB @ 20KHz
Output Channels Outputs per Channel Impedance Max. Level Output to Output Isolation
Quad (1x4) or Stereo (1x9) 4 (1x4) or 9 (1x9) 66 Ohms, 150 Ohms, or 600 Ohms +26dBu (66Ohms), +22dBm (600Ohms) >70dB, 20Hz to 20kHz
Performance Gain Range
-6 to +33dB, (±6dB, 0, +9, +18, +27 dB on jumper) >100dB @ unity gain 20Hz -20 kHz <±0.05dB, 20Hz - 20 kHz, rel. to 1kHz, any level up to +26dBu (66 ohms), +22dBm (600 ohms) Total Harmonic Distortion <0.01%, 20Hz - 20 kHz @ +26dBu (66 ohms), +22dBm (600 ohms) Isolation between Modules >100dB, 20Hz - 20 kHz Intermodulation Distortion <0.02%, SMPTE @ +18dBu (66 ohms), +18dBm (600 ohms) Interchannel Crosstalk >95dB, 20Hz -20kHz S/N Ratio Frequency Response
PATCHING & DISTRIBUTION TECHNOLOGY
20 East Kennedy Street, Hackensack, NJ 07601 201-457-1504 Fax: 201-457-1507 www.patchamp.com