LEAKINJECT
Crack Injection | Leak Stopping Water Cut | Tunnelling | Mining
INJECTION SOLUTIONS
THE CHEMISTRY OF INJECTION EPOXY
Epoxy technology is ideal for creating low viscosity, rigid injection resin that bonds tenaciously to mineral substrates. By optimizing these key characteristics, our injection resins offer superior performance whether anchoring, injecting or stitching in timber, concrete and masonry.
• • • • •
Low viscosity Exceptional adhesion Rapid hardening High strength Rigid structure
Bisphenol A Epoxy Structure
ACRYLIC
Acrylic technologies offer a different approach to solving water infiltration issues, particularly when compared to polyurethanes, as they typically form more stable gels rather than foams. These gels are more durable, and combined with a tenacious bond to mineral substrates offer a longer term solution. Acrylics are more complicated in application and utilize water as part of the reaction, therefore can be utilized in “dry” structures in anticipation of water ingress or areas subjected to varying water tables. Applied with plural component pumping technologies, these low viscosity resins provide excellent penetration and are chosen for curtain and follow on grouting after other grout types have stemmed water flow.
• • • • •
Ultra-low viscosity Durable gels React without water being present Ideal for curtain grouting Ideal for forming barriers around failed waterproofing
MMA Monomer
POLYURETHANE
Polyurethane resins are designed to provide a range of viscosities, reaction times, volumetric expansion and final foam characteristics. Polyurethane foams vary from rigid and flexible closed cell configurations to granular “excavatable” soil stabilization options. Polyurethanes are selected for their simple installation process, modifiable reaction times and overall ease of use, making them the most popular choice in many instances. Ideally suited to fast water cutting applications, and often chosen in mining, tunneling and shaft sinking applications to deal with difficult ground conditions.
• • • • •
Variable viscosities Fast curing – from seconds to minutes Flexible, rigid and granular options High expansion Easy application
Cyclical Bonding Structure of Polyurethane
PRODUCT SELECTION – INJECTION RESINS STRUCTURAL REPAIRS – EPOXY
WATERPROOFING – POLYURETHANES
• Concrete • Timber
• Ultra Rapid Cure • Expansive Reaction - Up to 2,000% • Low temperature • Tunneling, Mining, Shaft Sinking
• Masonry • Anchoring
Structo Inject 1380
A two-component, solvent-free injection resin with low viscosity for injection into cracked concrete.
FLEXIBLE
Structo Inject 1390
• Parking Structures • Basements • Moving Cracks & Joints • Walls
WATERPROOFING – ACRYLICS
Leak Inject Flex 6870
A two-component, solvent-free injection resin with very low viscosity for injection into cracked concrete.
• Curtain Grouting • ‘Dry’ Injection • Waterproofing Repairs • Tunnel Segments Leak Inject 509 Z Acryl
A four-component acrylic injection resin with exceptional adhesion properties used for the sealing of cracks and voids against water ingress.
Leak Inject 509 Z L Acryl
A four-component elastic acrylic injection resin with linear reaction time.
Leak Inject Z Rubber Acryl
A tough and highly elastic four-component, acrylate-based injection fluid with the initiator dissolved in a strengthening polymer blend to provide exceptional gel strength.
Leak Inject Rubber Acryl
A tough and elastic five-component acrylate based injection system in which the initiator salt is dissolved in a strengthening polymer blend to provide exceptional gel strength.
A low viscosity, single component MDI-based polyurethane injection resin that swells in contact with water to form a closed cell flexible foam.
Leak Inject Flex 6890
A medium viscosity, one-component MDI-based polyurethane injection resin that swells in contact with water to form a non-shrink, flexible foam.
Leak Inject 2K Flex 6811 LV
A two-component, MDI-based polyurethane injection resin with very low viscosity.
RIGID • TBM Pre-Injection • Water Cut • Soil Injection • Mining Applications Leak Inject Uni 6816
A low viscosity, single component MDI-based water reactive polyurethane injection resin. It reacts with water forming a rigid hydrophobic seal.
Leak Inject 6850
A low viscosity, one-component polyurethane injection resin which polymerises to form a hard granular foam on contact with water for soil stabilization.
800.263.3112 www.stonhard.ca
#4665-06/16