Sto Bespoke render tiles :StoEcoshape

Sto-Ecoshapes Basic range

Legal notes: It should be noted that the details, illustrations, general technical information, and drawings contained in this brochure are only general proposals and details which merely describe basic functions schematically. They are not dimensionally accurate. The applicator/customer is solely responsible for determining the suitability and completeness of the products used for the respective construction project. Neighbouring works are described only schematically. All specifications and information must be adjusted or agreed in the light of local conditions and do not constitute work, detail, or installation plans. The technical specifications and product information included in the Technical Data Sheets and system descriptions/approvals must be observed.

Sto-Ecoshapes Design parameters

Sample

Textures

Colours

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Supplementary information

Sto-Ecoshapes Pattern overview

A 001

B 001

C 001

D 001

E 001

A 002

B 002

C 002

D 002

E 002

A 003

B 003

C 003

D 003

E 003

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Bei der Planung Größe des kleinsten Teiles beachten!

Sto-Ecoshapes Example pattern ECS_A 001

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_A 001 Number of elements to create the pattern: 1

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_A 002

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_A 002 Number of elements to create the pattern: 4

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_A 003

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_A 003 Number of elements to create the pattern: 2

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_B 001

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_B 001 Number of elements to create the pattern: 1

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_B 002

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_B 002 Number of elements to create the pattern: 1

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_B 003

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_B 003 Number of elements to create the pattern: 4

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_C 001

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_C 001 Number of elements to create the pattern: 1

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_C 002

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_C 002 Number of elements to create the pattern: 2

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_C 003

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_C 003 Number of elements to create the pattern: 2

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_D 001

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_D 001 Number of elements to create the pattern: 2

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_D 002

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_D 002 Number of elements to create the pattern: 2

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_D 003

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_D 003 Number of elements to create the pattern: 3

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_E 001

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_E 001 Number of elements to create the pattern: 1

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_E 002

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_E 002 Number of elements to create the pattern: 2

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example pattern ECS_E 003

Detail view, pattern: (Viewing distance approx. 2.5 m) Scale = 1:10 (100 % in detail)

Pattern designation: ECS_E 003 Number of elements to create the pattern: 3

420 mm

Delivery time: on request

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Texture overview

Texture: 100

Texture: 200

Texture: 300

Texture: 400

Texture: 150

Texture: 250

Texture: 350

Texture: 450

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Texture 100

Detail view Viewing distance approx. 1 m

Possible texture modifications: • Multicolour, linear • Multicolour, nonlinear • Granulates

Modifications

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Texture 150

Detail view Viewing distance approx. 1 m

Possible texture modifications: • Granulates • (Granulates) + smoothing

Modifications

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Texture 200

Detail view Viewing distance approx. 1 m

Possible texture modifications: • Multicolour, linear

Modifications

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Texture 250

Detail view Viewing distance approx. 1 m

Possible texture modifications: • Multicolour, linear • Granulates • (Granulates) + smoothing

Modifications

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Texture 300

Detail view Viewing distance approx. 1 m

Modifications

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Texture 350

Detail view Viewing distance approx. 1 m

Possible texture modifications: • Granulates • (Granulates) + smoothing

Modifications

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Texture 400

Detail view Viewing distance approx. 1 m

Modifications

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Texture 450

Detail view Viewing distance approx. 1 m

Possible texture modifications: • Granulates • (Granulates) + smoothing

Modifications

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Colour, shape + joint

Shape (Architectural Colours)

Joint (standard portfolio)

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Colour, shape (selection for France)

16006

57 C3

16014

48 C2

16206

20 C2

16202

16 C3

16260

41 C3

16294

20 C2

16099

54 C1

16100

75 C1

16201

65 C1

16013

45 C3

16034

40 C2

16179

30 C2

16198

25 C3

16253

35 C3

16244

30 C3

16061

36 C2

16040

71 C1

16235

53 C2

16050

34 C3

16046

39 C2

16147

20 C2

16199

37 C3

16239

35 C3

16290

35 C1

16103

56 C1

16001

86 00

16284

56 C1

Further colour shades on request

16116

21 C3

16073

37 C1

16153

23 C3

16223

36 C3

16233

30 C3

16296

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

42 C1

16104

74 C1

16222

74 C1

Sto-Ecoshapes Colour, joint (standard range + selection for France)

white 2056 A

light grey 2059 A

cement grey 2058 A

grey 2060 A

graphite 2061 A

anthracite 2057 A

brown 2064 A

brown grey 2063 A

sand yellow 2062 A

31442

33240

34330

35230

16072

16280

16281

16295

16291

21 C3

10 C3

13 C3

12 C3

21 C2

Further colour shades on request

16286

86 C1

16104

74 C1

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

16 C1

26 C1

31 C1

45 C1

Sto-Ecoshapes Supplementary information

Texture modifications

Example cases

Notes and tips

Application

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, texture modifications Texture 100

Basic texture

+ multicolour design, linear

+ multicolour design, nonlinear

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

+ granulates (Sto-Siliciumcarbid 150 g/StoEffect Vetro 150 g) Note: observe light reflectance value!

Sto-Ecoshapes, texture modifications Texture 150

Basic texture

+ smoothing

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

+ granulates (Sto-Siliciumcarbid 150 g/StoEffect Vetro 150 g) Note: observe light reflectance value!

+ granulates (Sto-Siliciumcarbid 150 g/StoEffect Vetro 150 g) Note: observe light reflectance value! + smoothing

Sto-Ecoshapes, texture modifications Texture 200

Basic texture

+ multicolour design, linear

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, texture modifications Texture 250

Basic texture

+ multicolour design, linear

+ smoothing

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

+ granulates (Sto-Siliciumcarbid 150 g/StoEffect Vetro 150 g) Note: observe light reflectance value!

+ granulates (Sto-Siliciumcarbid 150 g/StoEffect Vetro 150 g) Note: observe light reflectance value! + smoothing

Sto-Ecoshapes, texture modifications Texture 300

Basic texture

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, texture modifications Texture 350

Basic texture

+ smoothing

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

+ granulates (Sto-Siliciumcarbid 150 g/StoEffect Vetro 150 g) Note: observe light reflectance value!

+ granulates (Sto-Siliciumcarbid 150 g/StoEffect Vetro 150 g) Note: observe light reflectance value! + smoothing

Sto-Ecoshapes, texture modifications Texture 400

Basic texture

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, texture modifications Texture 450

Basic texture

+ smoothing

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

+ granulates (Sto-Siliciumcarbid 150 g/StoEffect Vetro 150 g) Note: observe light reflectance value!

+ granulates (Sto-Siliciumcarbid 150 g/StoEffect Vetro 150 g) Note: observe light reflectance value! + smoothing

Sto-Ecoshapes, texture modifications Granulate quantities

100 + granulates (Sto-Siliciumcarbid 50 g), note: observe light reflectance value!

100 + granulates (StoEffect Vetro 50 g)

100 + granulates (Sto-Siliciumcarbid 100 g), note: observe light reflectance value!

100 + granulates (StoEffect Vetro 100 g)

100 + granulates (Sto-Siliciumcarbid 150 g), note: observe light reflectance value!

100 + granulates (StoEffect Vetro 150 g)

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Example cases

Prototyping

References

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Monochrome, texture-based use

Pattern: Texture:

A_001 100 250 Joint: 0 mm Tool: plasterer's leaf and square tool Time required: approx.

50 min./3 m² (without paint coat) Technical notes: • Additional coating • Elements sanded with EWIS sanding board prior to application • In the case of geometric shapes, joint and corner areas must be laid with particular care to avoid exacerbating errors.

• If necessary, factor in a compensation joint.

420 mm

Design notes: • Monochrome • Polytexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Monochrome, texture-based use

Pattern: Texture:

A_002 100 150 Joint: 0 mm Tool: plasterer's leaf and square tool Time required: approx.

60 min./3 m² (without paint coat) Technical notes: • Additional coating • Very complex pattern • Elements sanded with EWIS sanding board prior to application • In the case of geometric shapes, joint and corner areas must be laid with particular care to avoid exacerbating errors.

• If necessary, factor in a compensation joint.

420 mm

Design notes: • Monochrome • Polytexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Monochrome, texture-based use

Pattern: Texture: Joint: Tool: Time required:

B_001 250 0 mm jointing iron approx.

35 min./3 m² (without paint coat)

Technical notes: • Additional coating • Elements sanded with EWIS sanding board prior to application • Application documentation provided

420 mm

Design notes: • Monochrome • Monotexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Monochrome, texture-based use

Pattern: Texture: Joint: Tool: Time required:

B_002 250 15 mm jointing iron approx.

55 min./3 m² (without paint coat)

Technical notes: • Additional coating • Elements sanded with EWIS sanding board prior to application

420 mm

Design notes: • Monochrome • Monotexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Monochrome, texture-based use

Pattern: Texture: Joint: Tool: square tool Time required:

B_002 250 0 mm plasterer's leaf and approx.

55 min./3 m² (without paint coat)

Technical notes: • Additional coating • Elements sanded with EWIS sanding board prior to application • In the case of geometric shapes, joint and corner areas must be laid with particular care to avoid exacerbating errors.

• If necessary, factor in a compensation joint.

420 mm

Design notes: • Monochrome • Monotexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Monochrome, texture-based use

Pattern: Texture:

E_001 450 + StoEffect Vetro (150 g) + smoothing Joint: 0 mm Tool: plasterer's leaf and square tool Time required: approx.

50 min./3 m² Technical notes: • Seamless, without paint coat • Easy application due to interlocking shape • Recommendation: design the elements around 1 - 2 mm smaller to make application even easier and ensure greater technical reliability with regard to joint formation.

• If necessary, factor in a compensation joint.

420 mm

Design notes: • Monochrome • Monotexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Monochrome, texture-based use

Pattern: Texture:

E_002 450 + Sto-Siliciumcarbid (150 g) + smoothing Joint: 10 mm Tool: paint brush Time required: approx.

60 min./3 m²

420 mm

Design notes: • Monochrome • Monotexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Monochrome, texture-based use

Pattern: Texture:

E_002 450 + Sto-Siliciumcarbid (150 g) + smoothing Joint: 0 mm Tool: plasterer's leaf and square tool Time required: approx.

50 min./3 m² Technical notes: • Seamless, without paint coat • Easy application due to interlocking shape • Recommendation: design the elements around 1 - 2 mm smaller to make application even easier and ensure greater technical reliability with regard to joint formation.

• If necessary, factor in a compensation joint.

420 mm

Design notes: • Monochrome • Monotexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Polychrome, pattern-based use

Pattern: Texture:

A_001 100 250 Joint: 10 mm Tool: jointing iron Time required: approx.

60 min./3 m²

Technical notes: • Using the jointing iron for pointing in the case of geometrically angular shapes achieves excellent results.

• Application documentation provided

420 mm

Design notes: • Polychrome • Polytexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Polychrome, pattern-based use

Pattern: Texture: Joint: Tool: Time required:

C_001 300 12 mm jointing iron approx.

60 min./3 m²

Technical notes: • Using the jointing iron for pointing in the case of geometrically angular shapes achieves excellent results.

420 mm

Design notes: • Polychrome • Polytexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Polychrome, pattern-based use

Pattern: Texture:

C_002 200 250 350 450 Joint: 12 mm Tool: jointing iron Time required: approx.

65 min./3 m² Technical notes: • Using the jointing iron for pointing in the case of geometrically angular shapes achieves excellent results.

420 mm

Design notes: • Polychrome • Polytexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Polychrome, pattern-based use

Pattern: Texture:

D_003 300 450 Joint: 12 mm Tool: paint brush Time required: approx.

60 min./3 m²

Technical notes: • Application documentation provided

420 mm

Design notes: • Polychrome • Polytexture • The rough texture (450) takes the sharpness from the element contour.

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Polychrome, pattern-based use

Pattern: Texture:

E_001 100 + multicolour design nonlinear Joint: 10 mm Tool: paint brush Time required: approx.

65 min./3 m² Technical notes: • Colour gradient in the joint cannot be controlled precisely.

420 mm

Design notes: • Polychrome • Monotexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Partial use, combined with render

Pattern: Texture: Joint: Tool: Render:

A_001 100 12 mm jointing iron Standard-K Stolit® K 1.5 Time required: approx.

25 min./3 m² (without render)

420 mm

Design notes: • Polychrome • Polytexture • The transition from joint to render must be managed/checked in such a way as to ensure an aesthetically appealing result.

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Partial use, combined with render

Pattern: Texture: Joint: Tool: square tool Render:

B_002 250 0 mm plasterer's leaf and

Standard-K Stolit® K 1.5 Time required: approx.

15 min./3 m² (without render)

420 mm

Design notes: • Polychrome • Polytexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Partial use, combined with render

Pattern: Texture: Joint: Tool: Render:

C_001 300 10 mm jointing iron Standard-K Stolit® K 1.5 Time required: approx.

35 min./3 m² (without render)

420 mm

Design notes: • Polychrome • Polytexture • The transition from joint to render must be managed/checked in such a way as to ensure an aesthetically appealing result.

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Partial use, combined with render

Pattern: Texture: Joint: Tool: square tool Render:

C_002 350 0 mm plasterer's leaf and

Standard-K Stolit® K 1.5 Time required: approx.

40 min./3 m² (without render) Technical notes: • Additional coating • Partial use without joints is feasible; we advise against full-surface seamless use with this shape.

• In the case of geometric shapes, joint and corner areas must be laid with particular care to avoid exacerbating errors.

• If necessary, factor in a compensation joint.

420 mm

Design notes: • Monochrome • Polytexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, prototyping Partial use, combined with render

Pattern: Texture:

D_001 250 + StoEffect Vetro (150 g) + smoothing 150 + StoEffect Vetro (150 g) Joint: – Render: Standard-K Stolit® K 1.5 Time required: approx.

10 min./3 m² (without render) Technical notes: • Application documentation provided

420 mm

Design notes: • Polychrome • Polytexture

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, references Monochrome, texture-based use

Pattern: planner's design Texture: 100 Joint, horizontal: 15 mm Joint, vertical: – Tool: paint brush

Technical notes: • Additional coating

Design notes: • Monochrome • Monotexture

420 mm

“Schutzengel” residential building project, CH-Zug Architects: Leutwyler Partner Architekten AG, CH-Zug

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, references Polychrome, pattern-based use

Pattern: Texture:

planner's design 100 + multicolour design nonlinear 12 mm paint brush

Joint: Tool:

Technical notes: • Window reveals were left out, coated with render instead.

• Curve

Design notes: • Polychrome • Monotexture

420 mm

“Zuringhof” residential building, NL-Tilburg Architects: van den hout & kolen architecten, NL-Tilburg

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes, references Partial use, combined with render

Pattern: Texture: Joint: Tool: Render:

planner's design 100 10 mm paint brush Standard-K Stolit® K 1.5

Technical notes: • Window recesses were left out.

• Curve

Design notes: • Polychrome • Polytexture

420 mm

“De Garve” educational building, NL-Lochem Architects: 19 Het Atelier, NL-Zwolle

840 mm

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Notes and tips

Form • In order to produce the manufacturing template, a DXF or DWG drawing of the shape in a 1:1 scale is required. This should include a scale drawing of the pattern and the individual shape(s) with dimensions. The joint width must be shown/included in the drawing (see Fig. 1).

Texture/granulate/colour • Due to the manufacturing process and the dimensions stipulated by this process, format restrictions apply in the case of linear textures (200, 250) and the application of additive colour shades (linear). Upright formats with a horizontal texture or additive colour are limited to a maximum width of 420 mm (see Fig. 4).

• The maximum format is 840 mm x 420 mm (larger formats on request); the minimum format is 30 mm x 30 mm and must undergo a feasibility check based on the material thickness (standard 4 - 5 mm, maximum 7 - 8 mm) and texture.

• Additive colour shades which are incorporated into the manufacturing process prior to squeegeeing will produce a linear result (can be used with textures 100, 200, 250). The result is not necessarily even (linear). Up to two additional colour shades are possible and must be defined.

• Patterns should not be composed of more than four different shapes (installation complexity, economy).

• Additive colour shades which are applied in the manufacturing process after squeegeeing will produce a non-linear artisanal result. Can be used with texture 100 (nonlinear). Up to two additional colour shades are possible and must be defined.

• Patterns composed of ellipses or circles will require supplementary shapes in order to create a complete pattern (see Fig. 2).

• When designing facades with Sto-Ecoshapes, we recommend a joint width of 10 - 12 mm as standard to ensure flexibility when evening out the joint pattern during application. In the case of interlocking shapes, the joint width must be subtracted from the shapes to create an even joint pattern.

• If the Sto-Ecoshape facade has a seamless design, a 1 - 2 mm joint is to be subtracted from the individual shape to provide compensation room for installation. If necessary, factor in a sufficiently large compensation joint at regular intervals.

• Shapes with angles < 35° are to be avoided. More acute angles must be altered and adapted to ensure technical feasibility (see Fig. 3).

• Granulates can be used with textures 100, 150, 250, 350, 450. The application quantity of the granulates is variable (50 - 150 g) and can be defined. Granulates affect the colour appearance and brightness.

• Country-specific light reflectance values must be noted and observed.

• Additional smoothing of the textures is possible with textures 150, 250, 350, 450.

• The AC Collection can be used to colour the shapes and joints. The colour shades marked with a circle in the colour fan are preferable (other colour shades on request).

• The corners of the Sto-Ecoshapes are formed with a radius of 1.8 mm, as the manufacturing templates are produced using a milling process.

• Rectangular elements can be punched, depending on the desired texture, in order to achieve sharp, straight edges.

• Prefabricated corner elements (external corners) may be available on request depending on the shape and texture.

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Notes and tips

Application • The substrate must be dry and free from grease and dust.

• Make sure that no bonding and pointing mortar gets onto the surface of the elements. If the surface is soiled with bonding and pointing mortar, wash it off immediately with water. Smaller areas of soiling can be carefully scraped off after curing.

• If using the Sto-Ecoshapes on mineral substrates, prime the substrate with Sto-Primer.

• Cladding requires an absolutely smooth substrate. Consequently the tender for renderwork needs to define the substrate with increased accuracy. In particular, avoid unevenness caused by integrated profiles and mesh overlaps, etc. The tender specification for installing cladding should draw attention to the need to re-process substrates that have not been prepared accurately enough.

It is not possible to level the substrate while applying the cladding.

• In contrast to conventional wall coverings such as stone, there is no need for a separate pointing process with Sto-Ecoshapes. Immediately after the elements are embedded, the bonding and pointing mortar is smoothed with a paint brush or jointing iron (lancet).

• Additional pointing can be carried out using the Sto-Pointing Compound to achieve a smooth appearance but with accentuated joints. The feasibility of this process should be checked in advance based on the shape and texture.

• You should plan work on the facade according to the path of the sun and avoid direct sunlight. Do not store the Sto-Ecoshapes below 10 °C (increased risk of fracture).

• In the case of the monochrome, texture-based application of Sto-Ecoshapes (with paint coat or slurry), the elements can also be applied in a “seamless” manner (without visible joints). Take note in the case of complex patterns!

• Complex patterns increase the difficulty of application.

• For the slurrying finish, we recommend a filling paint coat (e.g. with StoColor Silco Fill or StoColor S fine/coarse). Two coats of paint or slurry should be applied.

• Particular care must be taken when applying the Sto-Ecoshapes if there is a strong colour contrast between the joints and the shapes. We recommend creating a test surface first.

• Curves with radii of up to 120 mm on buildings can be covered with Sto-Ecoshapes depending on the format and texture (check in advance!).

• In the case of partial use of Sto-Ecoshapes in combination with render, good workability must be ensured in the edge and join areas of the elements (angles, corners) when choosing the render texture (e.g. StoSignature: Texture, Standard-K; Stolit® K 1.5). The shape of the elements should ensure that this is the case! If necessary, adjust the colour of the bonding and pointing mortar to the colour of the finishing render (see.

Fig. 5).

• We recommend taking the Sto-Ecoshapes from different boxes to ensure a uniform appearance after application. If using different batches or additional (later) deliveries, carry out a visual comparison before application in order to identify possible differences. In the case of Sto-Ecoshapes that are manufactured according to project or customer specifications, carry out a visual comparison with the corresponding pattern before application in order to identify possible differences.

• We recommend laying out the elements on a horizontal surface in accordance with the specified pattern/installation plan prior to application.

• If possible, start work on a facade side that is not directly visible, as the processes within the team will improve and become more coordinated over the course of the project.

• When covering large surfaces and working with complex patterns, the surface should be divided into a grid. The elements are bonded in place from grid area to grid area, working diagonally from top to bottom (according to an installation plan if provided).

• Bonding the elements in a linear manner row by row (horizontally, vertically, or diagonally) can lead to distortions and the exacerbation of errors.

• Prior to application, sand the edges of the elements with the Sto-EWIS Sanding Board. This will make the pointing process easier later on.

• 4 - 6 elements (1 - 2 m2) are placed in the fresh adhesive bed in the grid areas that have been created. The elements are carefully aligned (joint pattern) and pressed down by hand. Caution: if pressure is only applied to parts of the surface, this will be visible in the result! Full-surface pressure should be applied with a sponge float or a suitable roller.

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Sto-Ecoshapes Notes and tips

212

212

Production direction

198

R155

Fig. 2

10

212

290

212

Max. 420 mm

114

Max. 840 mm Fig. 4

212

212

R145

212

Fig. 3

Fig. 1

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

Fig. 5

Sto-Ecoshapes, application Monochrome, texture-based

1

2

3

4

5

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

6

7

8

Sto-Ecoshapes, application Polychrome, pattern-based (amorphous)

1

2

3

4

5

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

6

Sto-Ecoshapes, application Polychrome, pattern-based (polygon)

1

2

3

4

5

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

6

Sto-Ecoshapes, application Partial, combined with render

1

2

3

4

5

The figures are not binding with regard to their colour shade and patterns. Due to varying production methods and product types, differences to the respective original products are possible and cannot be excluded. No claims regarding such variations as a result of the above causes will be accepted.

6

7

8

International subsidiaries

Phone +49 7744 57-1131 Fax +49 7744 57-2428 infoservice@sto.com www.sto.com

Belgium Sto NV/SA 1730 Asse Telephone +32 2 453 0110 www.sto.be

Ireland Sto Ltd Dublin 12 Telephone +353 1460 2305 www.sto.ie

Austria Sto Ges.m.b.H. 9500 Villach Tel.: +43 4242 33133-0 www.sto.at

China Shanghai Sto Ltd 201201 Shanghai Telephone +86 2158 972295 www.sto.com.cn

Italy Sto Italia Srl 50053 Empoli (FI) Telephone +39 0571 94701 www.stoitalia.it

Poland Sto Sp. z o.o.

03-872 Warsaw Tel.: +48 22 5116-102 www.sto.pl

Denmark Sto Danmark A/S 2650 Hvidovre Telephone +45 702 70143 www.sto.dk

Canada Sto Canada Ltd Etobicoke, Ontario M9W SW8 Telephone +1 416-855-0460 www.stocanada.com

Russia OOO Sto 119180 Moscow Telephone +7495 974 1584 www.sto.ru

Finland Sto Finexter Oy 01730 Vantaa Telephone +358 207 659191 www.stofi.fi

Malaysia Sto SEA Sdn Bhd 47810 Petaling Jaya, Selangor Telephone +60 3 61 56 61 33 www.sto-sea.com

Sweden Sto Scandinavia AB 581 10 Linköping Telephone +46 13 3771 00 www.sto.se

France Sto S.A.S. 95870 Bezons Telephone +33 1 34345700 www.sto.fr

Netherlands Sto Isoned bv 4004 LH Tiel Telephone +31 344 620666 www.sto.nl

Switzerland Sto AG 8172 Niederglatt (ZH) Telephone +41 44 8515353 www.stoag.ch

Norway Sto Norge AS 0175 Oslo Telephone +47 6681 3500 www.sto.no

Singapore Sto SEA Pte Ltd Singapore 575625 Telephone +65 64 533080 www.sto-sea.com

Slovakia Sto s.r.o. organizačná zložka 83104 Bratislava 3 Telephone +421 2 44648142 www.sto.sk Slovenia Sto Ges.m.b.H. Podružnica Ljubljana 1000 Ljubljana Telephone +386 01 4303 525 www.sto.com/si Spain Sto SDF Ibérica S.L.U. 08302 Mataró (Barcelona) Telephone +34 93 7415972 www.sto.es Czech Republic Sto s.r.o.

251 70 Dobřejovice Telephone +420 225 996 311 www.sto.cz Turkey Sto Yapı Sistemleri San. ve Tic. A.Ş.

34815 Beykoz, Istanbul Telephone +90 216 330 51 00 www.sto.com.tr

Hungary Sto Épitöanyag Kft. 2330 Dunaharaszti Telephone +36 24 51 0210 www.sto.hu USA Sto Corp.

Atlanta, GA 30331 Telephone +1 404 3463666 www.stocorp.com United Arab Emirates Sto Gulf Building Material LLC Dubai Telephone +971 45 51 55 61 www.stogulf.com United Kingdom Sto Ltd Glasgow G52 4TG Telephone +44 141 404 9000 www.sto.co.uk

Art. no. 009473 Rev. no. 01/03.18 Printed in Germany

Headquarters Sto SE & Co. KGaA Market Development Ehrenbachstrasse 1 79780 Stuehlingen Germany