8 minute read
Anchors
ANCHORS Anchor Bolts | Concrete Anchors | Façade Anchors General Hardware & Ties | Geotechnical Anchors Masonry Anchors | Post-Tensioning | Reinforcing Anchors | Utility Anchors
American Wood Council
Phone: 202-463-2766 Email: info@awc.org Web: www.awc.org Product: National Design Specifi cation® and Special Design Provisions for Wind and Seismic Description: AWC’s National Design Specifi cation(NDS®) for Wood Construction contains design provisions and tabulated anchor bolt design values for wood-to-concrete connections. AWC’s Special Design Provisions for Wind and Seismic contains design provisions for lateral, shear, uplift, and hold-down connectors used to attach wood frame shear walls to concrete.
ASDIP Structural Software
Phone: 407-284-9202 Email: support@asdipsoft.com Web: www.asdipsoft.com Product: ASDIP STEEL 4 Description: Design column steel base plates under any combination of vertical load and bending moment, including uplift (per AISC Design Series #1). Design anchor rods in tension and shear (per ACI 318-14 Chapter 17), shear lugs (per ACI 349), and required anchor reinforcement. Eccentric columns and Seismic Provisions included.
Bentley Systems, Incorporated
Phone: 800-BENTLEY Email: Samantha.Langdeau@bentley.com Web: www.bentley.com Product: RAM Elements Description: Analysis and design, including quickly performing 3D fi nite element analysis, of almost any type of structure or structural component. Save time and money by performing daily design tasks for all building projects, simple or complex, all within a single easy to learn and use application.
Product: RAM Connection Description: Perform analysis and design of virtually any connection type, verify connections in seconds, all with comprehensive calculations, including seismic compliance. Increase productivity with RAM Connection to optimize workfl ows and full integration of 3D design models.
Cintec Reinforcement Systems Ltd
Phone: 613-225-3381 Email: solutions@cintec.com Web: www.cintec.com Product: Cintec™ Reinforcement & Anchoring Systems Description: Cintec International is a globally recognized leader in engineering of structural masonry reinforcement and anchoring systems. Our innovative anchors provide a seamless solution for historic restorations, all masonry structures, and other important buildings worldwide. Construction Tie Products
Phone: 219-878-1427 Email: steve@ctpanchors.com Web: www.CTPanchors.com Anchors 5Product: CTP Grip-Tie; CTP STitch-Tie; CTP Stone-Grip Tie; CTP Facade-Tie Brackets Description: Restoration anchors for masonry reanchoring applications for brick, stone, cast stone, stucco, terra cotta, precast panel veneers to masonry, concrete, hollow CMU, grouted CMU, tile, steel, metal stud, wood stud, tile, and brick back ups.
DEWALT
Phone: 845-230-7533 Email: mark.ziegler@sbdinc.com Web: http://anchors.dewalt.com Product: e Mini-Undercut+ Anchor Description: An internally threaded, self-undercutting anchor designed for cracked and uncracked concrete, including seismic loading. Suitable base materials include post-tension concrete (PT slabs), hollow-core precast concrete and normal-weight concrete. e Mini-Undercut+ anchor provides consistent behavior at shallow embedments at 3⁄4-inch. ICC-ES ESR 3912 and FM approved.
Dlubal Software, Inc.
Phone: 267-702-2815 Email: info-us@dlubal.com Web: www.dlubal.com Product: RFEM Description: Stress analysis of complex connection layouts utilizing surface and solid elements, automatic fi nite-element meshing, mesh refi nements, and surface intersection capabilities. Perform required strength and serviceability limit state designs of RC (per to ACI-318 and other international standards). Represent soil-structure interaction with multiple soil layers for calculated foundation stresses and settlements.
ENERCALC, Inc.
Phone: 800-424-2252 ENERCAL C Email: info@enercalc.com Web: http://enercalc.com Product: Structural Engineering Library Description: Design of anchors and anchor bolts typically requires thorough development of applied loads, and may require analysis of full structures or connected components. Structural Engineering Library assists in determining those loads and performing those analyses through Loads & Forces modules and many analysis and design modules.
Not listed?
All 2017/2018 Resource Guide forms, including the 2018 TRADE SHOW IN PRINT, are now available on our website. www.STRUCTUREmag.org. Geopier Foundation Company
Phone: 800-371-7470 Email: info@geopier.com Web: www.geopier.com Product: Rammed Aggregate Pier® and Rigid Inclusion Systems Description: Specializing in Rammed Aggregate Pier®, Rigid Inclusions, and slope reinforcement systems, Geopier provides alternatives for massive over-excavation and replacement of deep foundations, including driven piles, drilled shafts or augered cast-inplace piles. ousands of structures around the world are currently supported by Geopier technologies. Start saving time and money with Geopier.
HALFEN USA
Phone: 800-423-8140 Email: info@halfenusa.com Web: www.halfenusa.com Product: HZA Anchor Channels Description: Ideal for seismic conditions as they provide load resistance in tension as well as transverse and longitudinal shear. HZA Anchor Channels are an ideal cast-in solution to replace post installed anchors and weld plates. Available in stainless steel and hot dip galvanized.
Product: HTA Anchor Channels Description: An ideal cast-in solution to replace post installed anchors and weld plates. HTA Anchor Channels are ICC Approved and provide a high level of adjustability to accommodate large concrete tolerances. Load resistance provided in tension and shear. Available in stainless steel and hot dip galvanized.
Hardy Frames
Phone: 800-754-3030 Email: dlopp@mii.com Web: www.hardyframe.com Product: Hardy Frame Anchoring Solutions Description: Hardy Frame pre-engineered anchorage details for Unreinforced, Reinforced and Back-to-Back Reinforced Anchorage Solutions are available to download. Embed details are also available for Z4 continuous tie-down systems. Details are organized to be used as supplemental sheets for plan submittals.
Heckmann Building Products, Inc.
Phone: 708-865-2403 Email: info@heckmannanchors.com Web: www.heckmannanchors.com Product: Pos-I-Tie® Veneer Anchoring System Description: e original single barrel masonry anchor. Designed to penetrate continuous insulation and fasten securely to steel studs. Factory assembled EPDM washer completely seals penetrating hole from air and moisture. Available ermalClip® accessory reduces thermal transfer. Passes NFPA 285, ASTM E2357 and ASTM E331 as part of the CavityComplete® Wall System.
ANCHORS Anchor Bolts | Concrete Anchors | Façade Anchors General Hardware & Ties | Geotechnical Anchors Masonry Anchors | Post-Tensioning | Reinforcing Anchors | Utility Anchors
Hohmann & Barnard, Inc.
Phone: 631-234-0600 Email: weanchor@h-b.com Web: www.h-b.com A MiTek - BERKSHIRE HATHAWAY COMPANY Product: TBS ermal Brick Support Description: A groundbreaking brick veneer support system that reduces thermal bridging in relief angles, as well as allows for continuous insulation behind the shelf angle to improve the energy effi ciency of your building! is system is designed and engineered in-house to permit a wide-range of adjustments to accommodate job site and project specifi c requirements.
Hubbell Power Systems, Inc.
Phone: 855-477-2121 Email: civilconstruction@hubbell.com Web: www.hubbellpowersystems.com/abchance Product: CHANCE Helical Tieback Anchors Description: Backed by over 100 years of engineering experience, CHANCE Helical Anchor Systems off er a technically advanced and extremely cost eff ective alternative to concrete and other deep foundation systems. CHANCE Helical Piles comply with the 2015, 2012, and 2009 International Building Code (IBC), are ICC-ES Approved and ISO:9001 Certifi ed.
IES, Inc.
Phone: 800-707-0816 Email: info@iesweb.com Web: www.iesweb.com Product: VAConnect Description: Steel base plates and shear tabs too are what we will design for you. ose anchor ‘calcs’ (Appendix D) are also dealt with easily.
Kelken Construction Systems
Phone: 732-416-6730 Email: ken@kelken.com Web: www.kelken.com Product: KELIGROUT Structural Adhesive Description: KELIGROUT is a superior high strength polyester resin anchoring material with guaranteed pullout values exceeding ACI-349-85.
RedBuilt
Phone: 888-859-6757 Email: pdrace@redbuilt.com Web: www.redbuilt.com Product: Open Web Truss Bearing Clips Description: ese trusses have tested lateral load capacities to frame seismic details without the use of strap ties. Clips may be welded or nailed to bearings in most project applications where straps are specifi ed, for CMU walls, or wider on-center spacings of 32 inches or more. RISA Technologies
Phone: 949-951-5815 Email: info@risa.com Web: risa.com Anchors 5Product: RISAConnection Description: Get baseplate and anchor design for RISA-3D and RISAFloor models using RISAConnection. Column base reactions, including biaxial moments, are sent for each load combination to RISAConnection. More accurate than traditional methods of designing for envelope reactions. With RISA-3D and RISAFloor integration RISAConnection is the new standard for baseplate design.
S-FRAME Software
Phone: 604-273-7737 Email: info@sframe.com Web: s-frame.com Product: S-FOUNDATION 2017 Description: A complete foundation management solution. Use as standalone application or integrated within S-FRAME Analysis. Easily import support data from any 3rd party analysis program. Automatically generates and manages the underlying model as you optimize your design. Includes advanced customization and integration features.
Simpson Strong-Tie®
Phone: 800-925-5099 Email: web@strongtie.com Web: www.strongtie.com Product: Strong-Bolt® 2 Wedge Anchor: Type 304 SS Description: Designed for use in cracked and uncracked concrete, as well as uncracked masonry applications. It is now available in Type 304 stainless steel for all standard sizes. e additional product off erings make it easier for you to choose the best material solution for your job.
Product: Stainless-Steel Titen HD® Heavy-Duty Screw Anchor Description: e new stainless-steel Titen HD screw anchor can now be installed in exterior and corrosive environments. Its innovative design eff ectively cuts the concrete while signifi cantly reducing carbon steel in the anchor to maximize corrosion resistance. Trimble
Phone: 770-426-5105 Email: kristine.plemmons@trimble.com Web: www.tekla.com Product: Tedds Description: Automating your everyday structural designs, Tedds’ broad library includes anchor bolt design per ACI 318 Appendix D. e calculation includes comprehensive checks for tensile and shear failure of anchors and is available as part of a free trial of the website.
Product: Tekla Structural Designer Description: Revolutionary software that gives engineers the power to analyze and design steel and concrete buildings effi ciently and profi tably. Physical, information-rich models contain all the intelligence needed to fully automate the design and document your project, including all end force reactions communicated with two-way BIM integration, comprehensive reports and drawings.
Product: Tekla Structures Description: Tekla is an Open BIM modeling software that can model all types of anchors required to create a 100% constructible 3D model. Anchors can either be created inside the software or imported directly from vendors that have 3D CAD fi les of their products.
Wej-it
Phone: 230-857-2200 Email: david@toggler.com Web: www.wejit.com Product: High-Performance Anchors Description: Wej-it has several new products for 2017: Hang-TITE Rod Hanger Anchors; Pound-It Drive Anchors; POWER-Skru Large Diameter Concrete Screws; and Screw-In Drive Screw Anchors.
Standards Design Group, Inc
Phone: 806-792-5086 Email: info@standardsdesign.com Web: www.standardsdesign.com Product: Wind Loads on Structures 4 Description: Performs computations in ASCE 7-10, Chapters 26-31 also ASCE 7-98, 02, 05, Section 6 and computes wind loads by analytical method rather than the simplifi ed method, provides basic wind speeds from a built-in version of the wind speed, allows the user to enter wind speed. Numerous specialty calculators. The TRADE SHOW IN PRINT is available online!
