BALCONY system system
316 Stainless Steel Modular Balcony System
SBS V2.0
1100
Sketch elevation front ront vie view ew
3D Model
2400
Plan view
BALCONY system
A
Balcony system A was designed for buildings which have a one side open balcony or a corner balcony. The system is very suitable for apartments and condominiums where there is a requirement for the balustrade to look modern & striking. Using wire infill for the balustrade balcony system, alongside stainless steel balusters, adds transparency, increasing the available view whilst remaining very safe for high floor balconies. System A also uses a continuous handrail, increasing aesthetic appeal and safety for the dwelling owner. The system is incredibly strong, safe & easy to install and because all of the component parts are made form 316 Stainless steel, the system will endure any weather for many years.
Balcony system A 3D Model Assembly parts for Balcony system A for 1 set NO.
2
4.1 4.2 6
5 9
7 3.1
3.2
8
1
Name
Code
Size
1. Stanchion base
BC1B-1008
51mm*90mm*85mm
3 PCS
2. Stanchion angle
BC3H-0038
38mm*77mm*40mm
8 PCS
3.1 Stanchion post type A (Middle) BC1P-MD90
40mm*9mm*874mm
1 PCS
3.2 Stanchion post type B (End)
40mm*9mm*874mm
2 PCS
BC2P-EN90
4.1 Flat bar handrail type A1
BC5H-6508-2370 50.8mm*9mm*2370.4mm 1 PCS
4.2 Flat bar handrail type A2
BC6H-6508-1014 50.8mm*9mm*1014.6mm 1 PCS
5. Link adjuster
BC1A-1208
12mm*77mm
8 PCS
6. Cover plate
BC1C-2803
28mm*3mm
8 PCS
7. Link plate
BC2H-0090
50mm*3mm*90mm
1 PCS
8. EM6 Deco stud
2960-3630
3mm M6*30mm
16 PCS
CX19-0003-1597
3mm*1597mm
8 PCS
9. Cable 1x19
Accessories - Flat head socket cap screw - Screw - Stud anchor - Adhesive capsule anchor (HVU) - Threaded stud - Domed nut - Washer - Right thread nut - Stanchion bush
www. strudyna.com
for 1 set
6799-1815 6933-0825 PBH2-6880 PBH3-0880 2955-0830 6158-7610 6158-7812 6914-1381 2000-2206 BC2B-0006
M8*1.25*20mm M8*25mm M8*80mm M8*80mm M8 M6 M8 1.5mm*8.5mm*18mm 6mm 14.28mm*6mm
18 12 16 16 2 16 26 26 16 6
PCS PCS PCS PCS PCS PCS PCS PCS PCS PCS
page 2
1100 2400
3DModel Model 3D
SSketch elevation front view w
Plan view
BALCONY system
Balcony system B 3D Model
B
B Ba Balcony alc lcon lcon onyy System Syst Sy stem tem B h has as b been bee een ee n designed desi de sign ign g ed d for for apartme apartments ents and condominiums with a narrow balcony, side. Because the application which iss open on just one side is for single sided balconies and incorporates wire infill, system B is very elegant with maximum transparency. Wire infill and steel balusters allow for a panoramic view from the balcony, barely obscuring views for its owners. Furthermore, for warmer countries, the lack of a paneled balustrade structure, e.g., Glass means that wind and fresh air are able to circulate freely. This system is a viable alternative to paneled systems, potentially adding value to any apartment or condo because of increased aesthetic and functional advantages over paneled systems. System B can be easily installed and again, because of the use of 316 Stainless in all components, the system has a high resistance to corrosive environmental circumstances that might leave other systems tarnished, or worse still in need of repair.
Assembly parts for Balcony system B for 1 set NO.
2
4
5
2
7 6
Code
Size
for 1 set
1. Stanchion base
Name
BC1B-1008
51mm*90mm*85mm
3 PCS
2 Stanchion angle
BC3H-0038
38mm*77mm*40mm
8 PCS
3.1 Stanchion post type A (Middle)
BC1P-MD90
40mm*9mm*874mm
1 PCS
3.2 Stanchion post type B (End)
BC2P-EN90
40mm*9mm*874mm
2 PCS
4 Flat bar handrail type B
8
3.1
3.2
BC1H-6508-2290 50.8mm*9mm*2290mm 1 PCS
5 Link adjuster
BC1A-1208
12mm*77mm
4 PCS
6 Cover plate
BC1C-2803
28mm*3mm
4 PCS
7 EM6 Deco stud
2960-3630
3mm M6*30mm
16 PCS
CX19-0003-2108
3mm*2108mm
8 PCS
6799-1815 6933-0825 PBH2-6880 PBH3-0880 2955-0830 6158-7610 6158-7812 6914-1381 2000-2206 BC2B-0006
M8*1.25*20mm M8*25mm M8*80mm M8*80mm M8 M6 M8 1.5mm*8.5mm*18mm 6mm 14.28mm*6mm
12 PCS 12 PCS 12 PCS 12 PCS 2 PCS 16 PCS 24 PCS 24 PCS 16 PCS page 6 PCS
8 Cable 1x19
1
Accessories - Flat head socket cap screw - Screw - Stud anchor - Adhesive capsule anchor (HVU) - Threaded stud - Domed nut - Washer - Right thread nut - Stanchion bush
www. strudyna.com
page 3
700
2000
Plan view
3D Model Model 3D
Sketch elevation front view
BALCONY system
C
Balcony System C has been designed for apartments and condominiums with larger balcony alcony areas. In particular, its most suitable for long terraces and those built with corners. This system has real functional & aesthetic etic appeal due to the continuous wires which run n the entire length of the balcony perimeter. Because se of the use of wire infill as opposed to paneled sections, ectionss, balcony system C helps the terrace look and feel very open, promoting panoramic views and a feeling g of increased space. In warmer climates, the wire infill also aids the movement of air throughoutt the area, supporting a relaxing balcony / terrace environment. Balcony system C continues to champion on the trend for transparency, safety and functionality ty whilst remaining easy to install and weather resistant. Like Lik all of the Strudyna balcony systems, the use of 316 stainless steel in the system component means that the system will continue to look great and perform its primary functions for many years, with little maintenance required.
Balcony system C 3D Model Assembly parts for Balcony system C for 1 set NO.
Name
Code
Size
1. Stanchion base
BC1B-1008
51mm*90mm*85mm
8 PCS
2.1 Stanchion angle 2.2 Stanchion angle link
BC3H-0038
38mm*77mm*40mm
16 PCS
3.1 Stanchion post type A (Middle)
BC1P-MD90
40mm*9mm*874mm
2 PCS
3.2 Stanchion post type B (End)
BC2P-EN90
40mm*9mm*874mm
6 PCS
4.1 Flat bar handrail type C1
4.3. 2.1. 4.2. 5
6
3.2.
2.2
3.1. 9.1
8 1
4.2 Flat bar handrail type C2
BC8H-6508-2564 50.8mm*9mm*2564.1mm 1 PCS
4.3 Flat bar handrail type C2
BC8H-6508-A564 50.8mm*9mm*564.1mm 1 PCS
5. Link adjuster
BC1A-1208
6. Cover plate 7. Link angle 90 degree
7
9.2
4 PCS
BC1C-2803
28mm*3mm
4 PCS
BC2A-1208
12mm*95.5mm
6 PCS
2960-3630
3mm M6*30mm
48 PCS
3mm*2392 mm
8 PCS
9.2 Cable 1x19
CX19-0003-1577
3mm*1577 mm
8 PCS
9.3 Cable 1x19
CX19-0003-0392
3mm*392 mm
8 PCS
Accessories - Flat head socket cap screw - Screw - Stud anchor - Adhesive capsule anchor (HVU) - Threaded stud - Domed nut - Washer - Right thread nut - Stanchion bush
www. strudyna.com
12mm*77mm
CX19-0003-2392
9.1 Cable 1x19
4.1.
113.5mm*77mm*40mm 2 PCS
BC7H-6508-1850 50.8mm*9mm*1850.8mm 1 PCS
8. EM6 Deco stud
9.3 2.1.
BC4H-J113
for 1 set
6799-1815 6933-0825 PBH2-6880 PBH3-0880 2955-0830 6158-7610 6158-7812 6914-1381 2000-2206 BC2B-0006
M8*1.25*20mm M8*25mm M8*80mm M8*80mm M8 M6 M8 1.5mm*8.5mm*18mm 6mm 14.28mm*6mm
36 32 22 22 2 48 72 56 48 16
PCS PCS PCS PCS PCS PCS PCS PCS PCS PCS
page 4
15.6 M.
4 M.
Plan view
Sketch elevation right side view 4.8 M.
3D Model
BALCONY system
D Balcony system D 3D Model
Balcony System D was developed for use in public areas, helping to create a modern visually appealing system that also compliments any existing building infrastructure. For use indoor or outside in public areas, Strudyna Balcony System D continues to promote maximum transparency, a departure from traditional paneled or solid balustrade which can restrict view’s and the movement of air. System D, like the systems detailed previously in this brochure, is very strong and safe with a tensioned wire infill. Wire infill promotes transparency and unrestricted views beyond any perimeter. In warmer countries, the wire infill also helps aid the movement of air in any space, helping to keep the environment cool and relaxing. Made with 316 stainless steel components, balcony system D is incredibly strong & corrosion resistant; the system is also very easy to install and maintain. These features arevery desirable in public areas, especially if the balustrade is very large as this equals a significant saving in terms of installation and ongoing operational expenditure. The system will continue to look great and last for years even in harsh environmental circumstances.
Assembly parts for Balcony system D (Commercial) No.
Name
Strudyna Balcony system D (Commercial)
Code
Size
Name
1. Stanchion base (Flexible)
BC3B-0008
50mm*100mm*90mm
Accessories
2.1 Stanchion angle 2.2 Stanchion angle link
BC3H-0038
38mm*77mm*40mm
BC4H-J143
143.5mm*77mm*40mm
Code
Size
- Flat head socket cap screw
6799-1815
M8*1.25*20mm
- Screw
6933-0825
M8*25mm
6933-0830
M8*30mm
3.1 Stanchion post type A (Middle)
BC1P-MD11
40mm*9mm*1074mm
3.2 Stanchion post type B (End)
BC2P-EN11
40mm*9mm*1074mm
- Stud anchor
PBH2-6880
M8*80mm
- Adhesive capsule anchor (HVU) PBH3-0880 - Threaded stud 2955-0830 - Domed nut 6158-7610
M8*80mm
4. Flat bar handrail type D
Contact sale team
50.8mm*9mm*xxxxmm
5. Link adjuster
BC1A-1208
12mm*77mm
6. Cover plate
BC1C-2803
28mm*3mm
7. Link angle 90 degree
BC2A-0C08
12mm*131.5mm
8. Link for double stanchion post
BC3A-1208
12mm*30mm
9. EM6 Deco stud
2960-3630
3mm M6*30 mm
CX19-0003-xxxx
3mm*xxxx mm
10. Cable 1x19
www. strudyna.com
M8 M6 M8
6158-7812
- Washer
6914-1381 1.5mm*8.5mm*18mm
- Right thread nut
2000-2206
6mm
*See more assembly parts details at page 13-16
page 54
A guide to specifying Strudyna Balcony Systems
A
Step 1
Step 2 Rule ule
Select the type of Strudyna Balcony System which is most suitable for your terrace or balcony.
Picture 1
Refer to the criteria laid out in the standard IBC of America for the conditions governing balcony design and installation. These conditions and recommendations have been summarized below.
The condition of balcony installation
243
1) Function : (See picture no.1) The balcony is appropriate with the private area and the public area; e.g. building, apartment or condominium. The height of balcony is specified as following this. Private area Private area 1.1 The private area should apply to the height of balcony at 900 mm. H 900 mm. H 1,100 mm. 1.2 The public area should apply to the height of balcony at 1100 mm. 2) The strength of the pole: (See the picture no.2) 2.1 The force all directions at 0.85 kN/m (product is not damage.) Picture 2 2.2 The pressure strength of cable at 0.22 kN/m (cable is not broken.) 3) The gap: (See the picture no.3) 3.1 The gap between the cable; the width should not be over 102 mm. (our product has the gap at 100 mm.) 3.2 The gap between the poles should not be over 1200 mm. If it is over 1200 mm, it should have the pole at the centre. 4) The size of handrails: The handrails as round type, the diameter should be 35-40 mm. For the other handrails should measure the perimeter between 102-160 mm. 5) The quantity of connector for the pole and wall For 5.1 Link adjuster used for connecting between pole and wall ce A ll di - Height of the pole 900mm use 2 pcs - Height of the pole 1,100mm use 3 pcs rect ions 5.2 Link angle 90 degree connect at the angle of the pole 0.89 - Height of the pole 900mm use 3 pcs - Height of the pole 1,100mm use 5 pcs kN/ m. 6) The point of angle for the top handrail has to use the connector every points: (See the picture no.5) 6.1 The balcony type A use the Link plate for connecting. All gap = 100 mm. 6.2 The balcony type B use the Stanchion angle link L shape for connecting. 7) Stainless steel anchor: (See picture no.6) 7.1 Use Chemical anchor- the length from the edge of cement to the drilling hole is between 50-80mm. 7.2 Use Metal anchor – the length from the edge of the cement to the drilling hole 80mm up. 8) Cable fitting (EM6): (See picture no.4) 8.1 Use with the cable 1x19. 8.2 Cable dia 3.4mm .(for the mock up sample we use cable dia 3mm) 8.3 The length of cable 3.4mm dia.per piece is not over 2400mm. 8.4 The height of balcony 900mm, use the cable 8 pcs. 8.5 The height of balcony 1100mm, use the cable 10 pcs. 9) The whole structure: ( Balcony system type A, B, C & D ) 9.1 All the parts with the thread, the thread have to be right hand thread. Picture 3 9.2 Balcony system use the thread M6 and M8 only. 9.3 All the parts with the thread M6, there are used for assembly with cable fittings only.
Link Plate
Min 50 mm. Stanchion Angle Link
Mi
n5
Picture 4
www. strudyna.com
Picture 5
Picture 6
0m
m.
page 6
Assembly & Installation Procedures for Strudyna Balcony Systems. Ho How ow w tto o
Step 3
Study the installation guide and follow the installation steps detailed over the following pages.
Step 4
Contact the Strudyna Sales team if you require further information regarding our proprietary Balcony Systems and their installation or if you are interested in additional products, services and capability available from Strudyna.
1. Prepare all components and tools See more information on page 15-16
Nuts & Bolts
Tools A Balco
A stem ny sy
1
1 2
3
4
5
2
6
7
3
8
9
4
10
BT933
BT7991
Hex wrench/Spanner
PBH2
BNUT/DIN1587
BC3B
BFWA/E1
BC2B
BC3H
BC4H (Link)
1100
900
BC1H, BC5H, BC6H BC7H, BC8H
www. strudyna.com
BC2A
SFNUT/R
For more information please see pages 13-15
Stanchion Post Components
BC1A
PBH3
Electric drill
6, 10, 13
BC1B
PBH1
BC1P, BC2P
BC3A
BC2H
BC1C
page 7
Assembly Procedure for Strudyna Balcony Systems A, B, C & D 2. Once you have organized your balcony system components, carefully follow the installation guide as laid out below and in the following pages.
Assemble each post as per the below diagrams
Post Balcony Type A,B,C (Residential) 900 mm. Type 1
Type 2
Type 3
End post
Middle post
Corner post
Type 4
Handrail with link adjuster
Type 5 Link plate detail
Type 6 Angled connection for handrail to wall
Post Balcony Type D (Commercial) 1100 mm. Type 1
Type 2
End post
Middle post
Type 3 Double post
Type 4 Corner post
Type 5 Angled connection for handrail to wall
*Recommended to use Type 3 double post for every 2400 mm. (refer to the length of cable per piece is not over 2400 mm)
www. strudyna.com
page 8
The Installation Procedures for Strudyna Balcony Systems A, B & C (Residential) Assemble each post as per the below diagrams. 9.
13 9.
13
14.
3.1 14. 13
3.1 14.
13
9.
13
13 3.1
3.2
14.
10.
14.
10.
14. 13
13
14.
10. 2.2
9.
9.
2.1
8. 2.2
2.2
11 6.
9.
7.
13
13
13
15. 10.
15.
15 10
13
13
13
10. 1.
1.
End post Type 1
11
Middle post Type 2
4.1
9.
Corner post Type 3
NO.
Name
Code
Size
BC1B-1008
51mm*90mm*85mm
2.1 Stanchion post type A (Middle) BC1P-MD90
40mm*9mm*874mm
2.2 Stanchion post type B (End)
BC2P-EN90
40mm*9mm*874mm
3.1 Stanchion angle
BC3H-0038
38mm*77mm*40mm
3.2 Stanchion angle link
BC4H-J113
113.5mm*77mm*40mm
Component 1. Stanchion base
7. 6. 11 Handrail with link adjuster Type 4
12.
9.
4.1
7. 6.
4.1 Flat bar handrail type A1
BC5H-6508-XXXX 50.8mm*9mm*XXXXmm
4.2 Flat bar handrail type A2
BC5H-6508-XXXX 50.8mm*9mm*XXXXmm
5. Link plate
BC2H-0090
50mm*3mm*90mm
6. Cover plate
BC1C-2803
28mm*3mm
7. Link adjuster
BC1A-1208
12mm*77mm
8. Link angle 90 degree
BC2A-1208
12mm*95.5mm
Accessories 9. Flat head socket cap screw
6799-1815
M8*1.25*20mm
6933-0825
M8*25mm
PBH2-6880 Adhesive capsule anchor (HVU) PBH3-0880
M8*80mm M8*80mm
10. Screw
4.2
5.
11. Stud anchor
Use with Stud anchor
Angled connection for handrail to wall Type 6
www. strudyna.com
11
11
11
12. Threaded stud 13. Dome nut Link plate Detail Type 5
1.
1.
14. Washer 15. Stanchion bush
PBH2-6880
2955-0830
M8*30mm
6158-7812
M8
6914-1381
1.5mm*8.5mm*18mm
BC2B-0006
14.28mm*6mm
page 9
Assembly Guide for Balcony System D (Commercial) Assembly each post as below
3.1
3.1
8.
7
8. 3.1
8. 12.
12. 12.
9.1
11.
9.1 12.
12.
9.1 11. 12.
2.2
10
2.2
2.1
8.
4. 5.
8.
9.2
9.2 9.2
1.
1.
12. 11.
11. 1. 12.
10.
10. Middle post Type 2
11.
10.
End post Type 1
11.
Double post Type 3
8.
3.1 NO.
3.2
Name
Code
Size
BC3B-0008
50mm*100mm*90mm
2.1 Stanchion post type A (Middle) BC1P-MD11
40mm*9mm*1,074mm
2.2 Stanchion post type B (End)
BC2P-EN11
40mm*9mm*1,074mm
3.1 Stanchion angle
BC3H-0038
38mm*77mm*40mm
3.2 Stanchion angle link
BC4H-J143
143.5mm*77mm*40mm
4. Cover plate
BC1C-2803
28mm*3mm
5. Link adjuster
BC1A-1208
12mm*77mm
Component
1. Stanchion base (Flexible)
9.1
12. 11.
8.
6. 2.2
9.2
BC2A-1208 6. Link angle 90 degree 7. Link for double stanchion post BC3A-1208 Accessories 8. Flat head socket cap screw 9.1 Screw
10.
12. Corner post Type 4
www. strudyna.com
1.
12mm*30mm
6799-1815
M8*1.25*20mm
6933-0825
M8*25mm
6933-0830 PBH2-6880 Adhesive capsule anchor (HVU) PBH3-0880 Use with Stud anchor PBH2-6880
M8*30mm M8*80mm M8*80mm
9.2 10. Stud anchor 11.
12mm*131.5mm
11. Dome nut
6158-7812
M8
12. Washer
6914-1381
1.5mm*8.5mm*18mm
page 10
Installation Guide for Strudyna Balcony System A, B & C (Residential) Tip For accurate installation, follow these 6 simple steps.
Min 50 mm.
Ă˜ 8 mm
1.
2.
4.
3.
6.
243
5.
9m
243
Tip Use Loctite for safety.
243
m.
9m
m.
www. strudyna.com
page 11
Installation Guide for Strudyna Balcony System D (Commercial) Tip For accurate installation, follow these 6 simple steps.
Ă˜ 8 mm Min 100 cm.
1.
2.
4.
3.
6.
243
5.
9m
243
Tip Use Loctite for Safety
243
m.
9m
m.
www. strudyna.com
page 12
Stanchion post Order no.
BC1B
Item
A (mm)
B (mm)
H (mm)
L1 (mm)
T (mm)
BC1B-1008
51
30
85
90
8
Order no. Item
A (mm)
B (mm)
H (mm)
L1 (mm)
T (mm)
BC3B-0008
50
30
90
100
10
BH
T
A
Stanchion base Technical Data Casting material : AISI316 - DIN 1.4408 Surface treatment : "M.F." (Matte finished) TAP : N/A
L1
B
BC3B
H T A
Stanchion base Technical Data Casting material : AISI316 - DIN 1.4408 Surface treatment : "M.F." (Matte finished) TAP : N/A
L1
Item
A (mm)
B (mm)
L (mm)
T (mm)
BC3H-0038
40
77
38
3
BC4H-J113
40
77
113.5
3
BC4H-J143
40
77
143.5
3
Order no. L
BC4H (Link)
L T
BC3H Stanchion angle
B
Technical Data Sheet material : AISI316L - DIN 1.4408 Surface treatment : "M.F." (Matte finished) TAP : N/A
A ØD
BC1P
ØD1
L1
L1
BC2P
A
BC1P
BC2P
type A (Middle) e)
type B (End)
L T
Order no.
A (mm)
ØD (mm)
ØD1 (mm)
L (mm)
L1 (mm)
T (mm)
BC1P-MD90
40
9
6.9
874
30
9
BC1P-MD11
40
9
6.9
1074
30
9
BC2P-EN90
40
9
6.9
874
30
9
BC2P-EN11
40
9
6.9
1074
30
9
Item
Stanchion post ost Technical Data Flat bar material : AISI316 Surface treatment : "M.F. " (Matte finished) TAP
: N/A
www. strudyna.com
page 13
Flat bar handrail A
BC1H, H, BC5H, BC6H BC7H, H, BC8H
L T For System A
Flat bar handrail Technical Data Sheet material : AISI316 Surface treatment : "M.F. " (Matte finished) TAP : N/A
Item
A (mm)
L (mm)
T (mm)
A1
BC5H-6508-XXXX
50.8
select
9
A2
BC6H-6508-XXXX
50.8
select
9
B
BC1H-6508-XXXX
50.8
select
9 9 9
B C
Order no.
Type
C1
BC7H-6508-XXXX
50.8
select
C2
BC8H-6508-XXXX
50.8
select
* Contact to Strudyna Sale team for checking the length and hole * Contact to Strudyna Sale team for more information of system D
Connector M
BC1A
Order no. L
ØD
Item
ØD (mm)
M (thread)
L (mm)
BC1A-1208
12
M8
77
Order no. Item
ØD (mm)
ØD1 (mm)
T (mm)
BC1C-2803
28
9
3
Order no. Item
A (mm)
L (mm)
T (mm)
BC2H-0090
40
50
3
Order no. Item
ØD (mm)
L (mm)
M (thread)
BC2A-1208
12
95.5
M8
BC2A-0C08
12
131.5
M8
Order no. Item
ØD (mm)
L (mm)
M (thread)
BC3A-1208
12
30
M8
Link adjuster Technical Data
ØD1
Bar material : AISI316 Surface treatment : "M.F. " (Matte finished) TAP : N/A
BC1C
Cover plate Technical Data Sheet material : AISI316L Surface treatment : "M.F. " (Matte finished) TAP : N/A
ØD
T
BC2H A
Link plate
T
L
Technical Data Sheet material : AISI316L Surface treatment : "M.F. " (Matte finished) TAP : N/A
L M
BC2A
Link angle 90 degree Technical Data Bar material : AISI316L I316L Surface treatment : "M "M.F. F " (Ma (Matte finished) TAP : N/A
ØD
BC3A ØD
Link for double ble stanchion post Technical Data Threaded stud
: Bar Forging material AISI316, EN 1.4401 Surface treatment : Matt finished TAP : N/A TAP
: 27.1
www. strudyna.com
L
M
page 14
Cable Fitting SF960
Order no.
ØOD
M
Item
L1 L
2960-3630
Ø Cable L (mm) (mm)
3
L1 (mm)
30
M ØOD (thread) (mm)
12
M6
6.35
EM6 deco stud cable Technical Data Bar material : AISI316L Surface treatment : "M.F. " (Matte finished) TAP : 57.10
ØD
CX19
LOC2
L
Hamma X 1x19
Loctite 263
Technical Data Cable material : AISI316 Construction : Spiral strand Configuration : 1x19 = 1+6+12 Module of elasticity : 132 +/-10 kN/mm Note : Limit tension is calculated at 60% of MBL.
Order no. Item
Size
Order no.
Size
LOC2 - 6350
50 ml.
Ø Size Cable Lenght Limit Tension (mm) (mm) (kN)
Length
CX19-0003-0000
3
4.45
select
Nuts & Bolts BT7991
Order no.
M
L
Flat head socket cap screw
Item
ØD (mm)
L (mm)
M (thread)
6799-1815
16
20
M8
Order no. Item
ØD (mm)
L (mm)
M (thread)
6933-0825
13
25
M8
6933-0830
13
30
M8
ØD
Technical Data Material
: AISI316 - DIN 7991
BT933 M L
Screw
ØD
Technical Data Material : AISI316 - DIN 933
M
PBH1
Order no.
L
PBH2
M
Stud anchor
L
Technical Data Material : AISI316 - DIN 1.4401
M (thread)
L (mm)
PBH1-6875
M8
75
PBH2-6880
M8
106
PBH3-0880
Adhesive capsule for stud anchor
PBH2-6880
PBH3 Order no.
ØM
SF955
Item
L
Item
M (thread)
L (mm)
2955-0830
M8
30
Threaded ded stud Technical Data Threaded stud tud
: Bar Forging material AISI316, EN 1.4401 Surface treatment : Matt finished TAP : N/A
M
Order no.
BNUT/DIN1587 L
Dome nut
L (mm)
M (thread)
S.W. (mm)
6158-7610
12
M6
10
6158-7812
15
M8
12.8
Item
S.W.
Technical Data Material : AISI316 - DIN 1587 TAP
: 27.1
www. strudyna.com
page 15
ACCESSORIES Nuts & Bolts BFWA/E1
Order no.
T
ØD1 ØD
Washer
Item
ØD (mm)
ØD1 (mm)
T (mm)
6914-1381
18
8.5
1.5
Order no. Item
ØD (mm)
ØD1 (mm)
T (mm)
BC2B-0006
14.28
8.45
6
Order no. Item
M (thread)
T (mm)
S.W. (mm)
2000-2206
M6
5
10
Technical Data Sheet material : AISI316 Surface treatment : "E.P." (Electro polished)
BC2B
Stanchion bush
ØD1 ØD
Technical Data
T
Bar material : AISI316 Surface treatment : Machine finished
M
SFNUT/R Right thread nut
S.W.
T
Technical Data Bar material : AISI316 Surface treatment : "E.P. " (Electro polished) Bar material : AISI316
MOCK UP BALCONY
Stainless steel 316 grade
Exclusive Agents Year 2014
Structural Dynamics Australia 4 / 14 Dover Drive Burleigh Heads Queensland 4220 Australia Tel : +07 5568 7084 Fax : +07 5576 5166 Email : ross@strudyna.com.au
www. strudyna.com
Structural Dynamics Europe Limited. Unit 10 Wingate Rd. Gosport, Hampshire, UK. PO12 4DP Tel : +44 (0) 845 262 5557 Fax : +44 (0) 239 294 0272 Email : sales@strudyna.eu
Anzor Fasteners Ltd. 8 Arrenway Drive Albany, Auckland, New Zealand Tel : +(64) 9 476 0001 Fax : +(64) 9 476 0090 Email : sales@anzor.co.nz
www. strudyna.com
Keng Wah Hardware Co. Pte. Ltd. Blk 2 Kitchener Road #01-85 Singapore 200002 Tel : +(65) 6392 4896 Fax : +(65) 6296 4736 Email : sales@kengwah.com
page 16