Prolimit was the first brand to make a KITE-SPECIFIC harnesses. We recognized that KITEBOARDING has different forces on a harness and we had to design KITE-SPECIFIC harnesses for real kite boarders. Since then we have adhered to these principles and continuously improve our designs to make the best KITEBOARDING HARNESSES on the planet. We do not add or remove a handle pass leash system to change a harness from a kite to a windsurf harness and vice-versa. These are our Unique features that distinguish the two applications.
WWW.PROLIMIT.COM
• PULL DIRECTION RESISTANT. Our kite harnesses are built to withstand the forces of a kite pulling more vertically than horizontally during jumps and maneuvers. Prolimit kite harness were the first to be CAD designed around an anatomically 3D model. Because of this feature our harness allows perfect pressure distribution for more comfort and rock solid stability. No matter were the pull goes. Prolimit harness use pre curved and 3D shaped inner plates. By doing this we ensure our way of true 3D shaped harness! Our unique combo profile.
•ASYMETRICAL BELT. Our Kite boarding harnesses belts are ASYMETRICAL. This is done for two reasons. 1. The overlap of the two belts is kept away from the maximum flush area, which stops it from washing open with a severe crash . 2. This overlap is also kept way from the bar pad, where it would cause discomfort. •MEMORY TABS. The Memory tabs are locking the front ends of the harness body onto the neoprene waist belt. Once set up for your tension preference, you can leave the MEMORY TAB set and only use the CLOSURE TAB to close the belt system. • INTEGRATED SLIDE IN BAR PAD SYSTEM. UNIQUE in our industry, it combines with the harness body to give 360 degrees of padding encircling the body and protects the ribs and sternum from spreader bar pressure during the huge vertical pull experienced when doing extreme moves or body-dragging. It locks
the spreader bar in place making it impossible for the bar to ride up on its own. Our industry first innovation. • HANDLE PASS LEASH. This is box-tacked in on both sides of the Harness. On our high end models we added Heavy- Duty stainless steel D-ring to accommodate the extreme forces while using it with either the rope-tube section, or attaching straight to the D-ring. •PROLIMIT patented PIN RELEASE BAR. The patented PIN RELEASE BAR allows quick fitting on our KITEBOARDING HARNESSES. No threading of webbing is necessary and buckle setting stay the same. Just CLICK_AND_GO! Perfect and trouble free release in every condition and added safety. • Kite specific: STUMP NOSE SPREADER BAR SYSTEM. The STUMP NOSE spreader bar combats unwanted unhooking from unusual pull directions like riding toe side. •PROLIMIT FAT BAR. Used our high back Kite boarding harnesses. The over-sized PROLIMIT FAT BAR gives an even more twist resistance for free-style freaks, gives added safety and shows how strong a bar can be. •PROLIMIT Duracore belt: to make our harness un destroyable we use a Duracore belt to attach our spreader bars. No simple polyprop (high wear) webbing but safetybelt quality. It is not something you would pick up. But if you use your harness you will notice that nothing can beats this durability.
THE ABOVE FEATURES MAKE OUR PROLIMIT KITE HARNESS A “UNIQUE PRODUCT” WHICH CAN NOT BE COMPARED TO ANY PRODUCT OUT THERE!
WWW.PROLIMIT.COM
KITEBOARDING.
• KITE SPECIFIC BELT SYSTEM. A belt system which allows sliding of the harness slightly around the waist horizontally but keeps the harness in place for no vertical movement. The insert positions of the belts are optimized for the best combination of stretch and support.