ATH DSH3000F2
Description • • • • • • • • •
Double-scissor lift for surface installation Low drive-on height of ca. 112 mm With mechanical tilt-lever system, in order to lift with full power Synchronization due the main and slave cylinder Hydraulic safety device prevents unintentional lowering of the lift, no compressed air supply is required The integrated light barrier permanently controls the synchronization of the lift and can be switched off Lifting and lowering with push button control Signal sound and CE-Stop Included four rubber pads (115 x 100 x 55mm)
Technical Data Capacity Lifting-/lowering time Concrete strength / quality Motor performance Electrical connection Fusing protection Noise level Operating temperature Weight
3.000 kg ca. 50/50 sec 200 mm / C20/25 2,20 kW (3 ~) 400V / 50Hz 3C16 A 70 dB (A)/lm -10 – 40 °C 830 kg
Item number: 63 03 07
Dimensional drawing
Special features
Solid extensions for enlarging the lifting platforms
Optical end switch (1) and CE-Stop switch (2) ensure a long life due wear-free operation. Through the protected position between the scissors components damages of the switches from outside are reduced.
ATH DSH3000FI2
Descritption • • • • • • • •
Double-scissor lift for in-ground installation With mechanical tilt-lever system, in order to lift with full power Synchronization due the main and slave cylinder Hydraulic safety device prevents unintentional lowering of the lift, no compressed air supply is required The integrated light barrier permanently controls the synchronization of the lift and can be switched off Lifting and lowering with push button control Signal sound and CE-Stop Included four rubber pads (115 x 100 x 55mm)
Technical Data Capacity Lifting-/lowering time Concrete strength / quality Motor performance Electrical connection Fusing protection Noise level Operating temperature Weight
3.000 kg ca. 50/50 sec 200 mm / C20/25 2,20 kW (3 ~) 400V / 50Hz 3C16 A 70 dB (A)/lm -10 – 40 °C 830 kg
Item number: 63 03 09
Dimensional drawing
Special features
Solid extensions for enlarging the lifting platforms
Optical end switch (1) and CE-Stop switch (2) ensure a long life due wear-free operation. Through the protected position between the scissors components damages of the switches from outside are reduced.
Optional accessories

Anchor bolts ABL-W Steel, white galvanized
Chemical anchor AVA-W  Steel, white galvanized Item number: 09 05 21
Item number: 09 05 26
OEST hydraulic oil 32 DD L
Additional for hydraulic oil Low friction additive 0,2l is sufficient for approximately 15l hydraulic oil Item number: 09 05 31
Item number: 09 05 30