ATH-Heinl www.ath-heinl.com
Two post lift concept • Enables flexible combination of the lift as needed • High-quality and robust electro-hydraulic two-post lift • Electromagnetic safety locking system • Lifting limit and CE-Stop switches • Band-cover for protection of cylinders, chains and ropes
HX3
HL3
H3
Type Load capacity
2.28
2.32
2.35
2.40
2.50
2.800 kg
3.200 kg
3.500 kg
4.000 kg
5.000 kg
2.50H3
2.50HX3
www.ath-heinl.com
ATH 1.25S2
ATH 1.25M2
• 1.25S2: Fixed one-post lift • 1.25M2: Mobile one-post lift • With a high quality hydraulic motor performance • Perfect lift for painting jobs and bodywork, brakes and tire service • Small work space requirements • Electromagnetic unlocking of safety notch • Telescopic arms with adapter extensions
ATH 4.35 / 4.55
ATH 4.35A / 4.55A
• 4.35: Four-post lift for passenger cars • 4.55: Four-post lift for passenger cars and vans • 4.35A / 4.55A: With recesses for turn plates in the front and already installed sliding-plates in the back • With flat platforms and rails for an optional rolling jack • Automatic mechanical back-up safety device with pneumatic release for leveling • One platform is continuously adjustable • Pneumatic unlocking of notches
ATH RSH3000M
ATH RSH3000
• RSH3000M: Mobile mid-rise lift with mechanical synchronization by cross connections on the ground • Automatic electromagnetic safety locking-system • RSH3000: fixed mid-rise lift with hydraulic synchronization that ensures even lifting and lowering • Integrated light barrier permanently controls the synchronization of the lift • Pneumatic unlocking security system • With mechanical rocker arm system, in order to lift with full power • Platform extension by fixable ramps on both sides • Signal sound and CE-stop
DSH3000-2
DSH3000F(I)2
• DSH3000-2: Double-scissor lift for in-ground installation • DSH3000F(I)2: Double-scissor lift with mechanical rocker arm system, in order to lift with full power • For in-ground and surface mounting • Hydraulic synchronization control with double cylinder (master and slave cylinders) • Switchable safety photocell sensor for self-leveling • Signal sound and CE-stop
SH5000H
SH5000HA
• Platform scissor lift for in-ground installation or surface mounting (with optional ramps) • SH5000HA: Equipped with cavities for turn plates in front, already installed sliding plates in the back and freewheel lift • Serial with rails for optional rolling jack • The hydraulic sequence control (master and slave cylinders) ensures an even lifting and lowering of the scissors • The light barrier controls the synchronization and can be turned off • Lifting and lowering with push button control • Signal sound and CE-stop Type
1.25S2 1.25M2
4.35 4.35A
4.55 4.55A
Load capacity
2.500 kg
3.500 kg
5.500 kg
DSH3000-2
DSH3000F(I)2
3.000 kg
www.ath-heinl.com
SH5000H SH5000HA 5.000 kg
RSH3000M 3.000 kg
RSH3000
M SERIES NEW!
ATH M92
ATH M72+A32+A34
ATH M52+A34
ATH M32
ATH Tire Changers M-Series: • New warp-resistant construction with high precise Laser cut manufacturing • High resistant powder coating with hammer painting design • High clamping capacity (outside) • M72 and M92 2 speeds (7 and 14 rpm) • Pneumatically mounting head clamping with adjustable automatic horizontal and vertical distance control • Self-centering 4-clamping-jaws system with 2 double-acting aluminum clamping cylinders • Double acting aluminum bead breaking cylinder and bead breaker on the side with anti stuck system • Front extractable pedal assembly with aluminum valves and ergonomically arranged pedal control Type Clamping capacity (outer/inner) Rim width Wheel diameter max.
M92
M72
M52
M32
12-26“
9-26“ / 11-30“
12-22“ / 14-26“
12-22“ / 14-26“
4-13“
4-13“
4-13“
4-13“
1050 mm
1050 mm
1050 mm
980 mm
ATH A32 ATH A34 • A32: Left assist arm • A34: Right assist arm • Pneumatic drive • For upgrading tire changers
M
NEW!
ATH W82 Touch 3D
ATH W62 3D
ATH W42 2D
SERIES
ATH W22
• ATH Wheel Balancers W-Series • Wheel balancer for passenger cars, vans and motorcycles • High resistant powder coating with hammer painting design • Electric motor with opto-ride technique • Laser and LED positioning of weights and on-screen display (LPS) • Program choice: static, dynamic, aluminum programs, aluminum weight optimizing incl. split-program • Integrated light inside the wheel • Ergonomically arranged front panel and big counter weights holder • Balancing shaft and quick nut with a diameter of 40mm Type Diameter of centre bore
W82
W62 44,5-133 mm
Rim width
1,5-20“
Rim diameter
12-24“
Wheel weight max.
65 kg
www.ath-heinl.com
W42
W22
ATH RG5.5-4 / RG7.5-4
ATH RG5.5-6 / RG7.5-6
• Mobile column lift for trucks with simple, robust and low maintenance technology • Lifting mechanism with hanging spindle • Motor with overheating protection • 4/6 cube designed mobile columns • The control can be switched from one to all-column lifting • With the hand hydraulic wheel set, the columns can be moved in an easy and secure way Type
RG5.5-4
Load capacity per column
ATH RG 5.5-4
Number of columns
RG5.5-6
RG7.5-4
5.500 kg 4
6
4
6
ATH RG 7.5-6
ATH 7256
ATH 7242
ATH 7226
RG7.5-6
7.500 kg
ATH 7226 / 7242 / 7256 • ATH 7226: The mounting arm on the slide is movable in both directions, manually turn able and expandable • ATH 7242: The mounting arm on the slide is hydraulically moveable in both directions, manually turn able and automatically expandable • ATH 7256: The mounting arm on the slide is hydraulically moveable in both directions, automatically turn able and expandable • Electro-hydraulic tire changer for trucks and light trucks Type 7226 7242 7256 • Clamping mechanism with 4 clamping arms, for hydraulic clamping 150-1.100 and lifting Clamping capacity 120-650 mm 120-1.000 mm (490-1.550) mm • Electric drive for turning the clamping arm Rim diameter max.
Wheel diameter max. Mounting speeds
26“
42“
56“
1.500 mm
2.250 mm
2.450 mm
1
2
2
ATH 1200 • Stationary wheel balancer for passenger cars, transporters and truck tires • With pneumatic tire lifter • Controlled by microprocessor, double LED screen • Automatic function with pneumatic tire brake and program choice between 9 balancing methods, static and dynamic balancing and ALU-program for alloy rims • Integrated software for calibration • Special clamping adapter for truck tires (5 point centering flange) Diameter of centre bore
45-290 mm
Rim width
5-20“
Rim diameter
13-24“
Wheel weight max.
160 kg
ATH-Heinl GmbH & Co. KG Kauerhofer Str. 2 92237 Sulzbach-Rosenberg Germany © 2014 copyright by ATH-Heinl GmbH & Co. KG
Tel.:+49 (0)9661-87764-00 Fax:+49 (0)9661-87764-01 info@ath-heinl.de www.ath-heinl.de