April 2011
1801-0506
1801-0500
1801-0502
1801-0508
1801-0510 1801-0505
4” SLIP-ON MUFFLERS
•4” diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome finish •Bolt to stock locations with supplied hardware •Sold in pairs •Made in the U.S.A.
PART # DESCRIPTION FOR 95-11 FLT, FLHT, FLHX, FLTR, FLHR, FLHX MODELS WITH 2” STANDARD BAFFLES
1801-0506 1801-0504 1801-0500 1801-0502 1801-0508 1801-0510
Slant cut Scalloped slash-cut Straight cut Slant down Scallop slant-cut Inverted billet insert
SUG. RETAIL $489.95 499.95 469.95 489.95 499.95 499.95
PART # DESCRIPTION WITH 21/2” PERFORMANCE BAFFLES
1801-0507 1801-0505 1801-0501 1801-0503 1801-0509 1801-0511
Slant cut Scalloped slash-cut Straight cut Slant down Scallop slant-cut Inverted billet insert
SUG. RETAIL $489.95 499.95 469.95 489.95 499.95 499.95
ANDREWS PRODUCTS
We are proud to say that we have been partnered with the Andrews company right from the start. Over the years their product line has grown to include high-quality products of all types including engine, drivetrain and electrical. And while today their customers also include top Nascar and Busch racing teams that demand the best, they have never lost focus on their attention to detail, quality and performance for riders who also demand the best.
“C” GRIND CAM FOR 48-69 BIG TWIN
•Best production cam made for big street engines •Strokers from 84 to 96 inches will really turn on this cam •Broad torque range from 2,000 to 7,000+ rpm
PART #
DESCRIPTION
0925-0583
For 66-69 Shovelhead and 48-65 Panhead
GRIND “C”
0928-0027
0928-0026
PUSHROD KITS
0928-0027 0928-0026
DESCRIPTION
SUG. RETAIL $98.95 98.95
“N” GRIND CAMS
•Stock Knuckle replacement cam •For stock motors and restoring an older classic engine, this is the cam to use 0925-0584
For 37-47 Knucklehead
DURATION @ .053
VALVE LIFT
37° 61°
61° 37°
278° 278°
.525 .525
•Biggest available fourcam set that does not require head work; however, some 82 engines may require spring spacing •Uses stock springs and provides great mid-range and upper-end power •Use with 9.0:1 to 10.0:1 compression ratios for best power gain NOTE: Tach drive gear must be removed from #4 cam on 81-E84 models.
CAMS FOR KNUCKLEHEAD ENGINES DESCRIPTION
CLOSE
“Y” CAMS
Aluminum Chromoly
PART #
$145.95
OPEN
XL CAMS
•Pushrods fit Shovel engines using stock diameter tubing so there is no cover tube interference •Available in aluminum for quiet operation or chromoly for maximum strength
PART # FOR 66-84 SHOVELHEAD
Intake Exhaust
SUG. RETAIL
SUG. RETAIL
PART #
DESCRIPTION
DS-199356
For 71-E84 XL
GRIND “Y”
Intake Exhaust
SUG. RETAIL $407.95
OPEN
CLOSE
DURATION @ .053
VALVE LIFT
35° 53°
47° 29°
262° 262°
.425 .425
$163.95
“S” GRIND CAMS
•Bolt-in performance cam •Smooth idle, strong pull to 6000 rpm •This cam is the knuckle equivalent of a “B” cam in a Pan/Shovel motor
PART #
DESCRIPTION
0925-0585
For 37-47 Knucklehead
SUG. RETAIL $163.95
“K” GRIND CAMS
“PB+” CAMS
•Perfect cam for stroked motors •Strong pull to 6000 rpm •This is the Knuckle equivalent of a “C” cam in a Pan/Shovel motor
PART #
DESCRIPTION
0925-0586
For 37-47 Knucklehead
GRIND “N”
OPEN
CLOSE
SUG. RETAIL DURATION @ .053
$163.95
VALVE LIFT
Intake Exhaust
13° 47°
44° 16°
234° 240°
.348 .348
Intake Exhaust
27° 55°
55° 27°
262° 262°
.370 .370
Intake Exhaust
35° 63°
63° 35°
278° 278°
.368 .368
“S” “K”
2
•Bolt-in four-cam set •More horse power and torque •Stock springs OK to 7000 rpm, requires no headwork
PART #
0925-0593 For L84-85 XL 0925-0592 For 81-E84 XL
GRIND PB+
Intake Exhaust
SUG. RETAIL
DESCRIPTION
$407.95 407.95
PART #
DESCRIPTION
0925-0591 For 71-80 XL 0925-0590 For 57-70 XL
SUG. RETAIL $407.95 407.95
OPEN
CLOSE
DURATION @ .053
VALVE LIFT
LIFT @ TDC
34° 43°
40° 31°
254° 254°
.400 .410
.200 .192
SUPERVOLT IGNITION COILS
2102-0204 •The original Andrews ignition coil adds great performance with a classic look •Replacement coils deliver 30,000+ volts •2.8 ohm coil fits electronic ignition/dual fire •4.8 ohm coil fits points ignition/dual fire •Produce more voltage than a stock coil •Sold each
PART #
DESCRIPTION
2102-0204 2102-0205
4.8 ohm coil, black 2.8 ohm coil, red
2102-0205 1201-0584
SUG. RETAIL $62.95 62.95
1201-0583
1201-0588
BELT DRIVE TRANSMISSION PULLEY •Machined from heat-treated, gear-quality steel •Made in the U.S.A.
NOTE: May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment
PART # DESCRIPTION SUG. RETAIL FOR ALL 07-11 SIX-SPEED BELT DRIVE MODELS AND 06 DYNA GLIDE
1201-0584 1201-0587
31-tooth “Good Acceleration” 32-tooth Stock replacement
$137.95 137.95
1201-0583 1201-0586 1201-0589
31-tooth “Good Acceleration” 32-tooth Stock replacement 33-tooth “Overdrive”
137.95 137.95 137.95
1201-0582 1201-0585 1201-0588
31-tooth “Good Acceleration” 32-tooth Stock replacement 33-tooth “Overdrive”
147.95 147.95 147.95
FOR 94-06 BIG TWIN FIVE-SPEED BELT DRIVE MODELS (EXCEPT 06 DYNA GLIDE)
FOR 85-93 BIG TWIN FIVE-SPEED BELT DRIVE MODELS
1621-0302
1621-0301 1621-0303
ADJUSTABLE PASSENGER floorBOARDS WITH MOUNTS
•The ultimate in passenger comfort; movement of boards 2.5” forward eliminates the problem of passenger’s calves pressing against saddlebag guard rail, also greatly increases foot and leg support over stock boards •Boards available in either classic steel or billet aluminum; all mounts are CNC-machined from billet aluminum and triple chrome-plated •Pads are made of anti-vibration neopene to ensure passenger comfort •Adjust in seconds by pulling the spring-loaded locking pins •Install easily without modification to the bike; no tools required •Available for bikes with OEM or Rinehart exhaust
PART # DESCRIPTION SUG. RETAIL FOR 93-09 FLT/FLHT/FLHS/FLTR/FLHR/FLHX/FLHTCUTG WITH OEM EXHAUST 1621-0302 1621-0303
Classic steel boards Billet aluminum boards
$379.95 429.95
FOR 93-09 FLT/FLHT/FLHS/FLTR/FLHR/FLHX/FLHTCUTG WITH RINEHART TRUE-DUAL EXHAUST 1621-0305 1621-0304
Classic steel boards Billet aluminum boards
379.95 429.95
ADJUSTABLE PASSENGER FLOORBOARD MOUNTS
1621-0306
•Made from CNC-machined, billet aluminum, then triple chrome-plated •Accept either stock Harley-Davidson® floorboards or any direct-fit accessory floorboard (floorboards not included) •Adjust in seconds through a 9” range of motion; simply pull out springloaded lock pins, then move board up or down until pin clicks into next position; no tools required •Available for bikes with OEM or Rinehart exhaust
PART # DESCRIPTION FOR 93-09 FLT/FLHT/FLHS/FLTR/FLHR/FLHX/FLHTCUTG
SUG. RETAIL
PART #
DESCRIPTION
SUG. RETAIL
3902-0093
For 11 FLHTCUTG/FLHXXX models
1621-0301 1621-0306
For bikes w/ OEM exhaust For bikes w/ Rinehart True-dual exhaust
$329.95 329.95
TRAILER HITCH FOR H-D TRIKE MODELS
•Super-strong receiver type hitch fabricated from laser cut steel, hand welded, then powder coated •Bolts directly to frame in minutes •Receiver is almost completely hidden and tongue installs easily using a hitch pin and clip •Hitch made to be used with or without Harley-Davidson’s optional rear bumper •Tongue and 17/8” ball are triple chrome plated •Tongue height measures 11” to accommodate most trailers •Includes plug-and-play wire harness and all necessary hardware •Made in the U.S.A.
$299.95
3
DYNOJET
Most of you know that Dynojet is a world leader in the development and manufacture of high performance accessories of all types. Their state-of-the-art facilities and technology keeps them at the forefront of performance with new products constantly in the works. We at Drag Specialties are proud to be able to bring you their latest offerings quickly and easily so that you can keep your customers at the forefront of their fellow riders.
POWER VISION
•The quickest and most powerful flash tuner on the market •The sophisticated, yet easy-to-use, 3.5” full-color touch-screen display mounts to handlebars with integrated Amps 4-hole threaded inserts; also mounts to most mounts that feature Amps 4-mounting options, see page 1333 of the 2011 FatBook •The display’s interface cable plugs directly to the bike’s diagnostic connector •NO COMPUTER REQUIRED; simply select the tune and follow the on-screen prompts to flash the bike; tunes can also be edited directly from the Power Vision •Utilizes WinPV (Windows PC-based tuning application) •Stores up to six different tunes that can be flashed to the bike •Downloads and stores the stock calibration in case OEM restoration is needed; stock calibration can also be saved as an editable copy and used as a starting point •Dynojet preconfigured tunes are preloaded on the unit; Power Vision will identify the bike’s information and automatically sort hundred of applicable, dyno-proven tunes •Custom tunes can be loaded by a tuning shop or received via email and loaded onto the device •Displays all J1850 H-D vehicle data, wide-band air fuel ratio2 and various calculated channels (including MPG instant and trip MPG) •AutoTune Basic and Pro3 calculates and stores fuel trims to optimize fuel curve •Checks and clears diagnostic codes •Features adaptive trims and idle offset (with bike running) NOTE: The Power Vision “marries” an individual ECM and may be used only on that bike for flashing the ECM. For this reason LeMans Corporation/ Drag Specialties does not take back Power Visions for any reason, used or not. All returns and or adjustments must be made directly with Dynojet Research. PART # DESCRIPTION SUG. RETAIL The Power Vision may be used on any bike to read and clean trouble codes. 1020-1493 For all H-D models with Delphi ECM (except 11 Softails) $549.95
FUELPAK
•Original version which is not legal for sale in CA •Throttle position sensor-based system simplifies the process of fuel-injection tuning •Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button •Increases power and improves throttle response •Very user friendly; plugs into the existing harness on the bike •No computer or software is required, simply punch in the values supplied with the Fuelpak •Values supplied are for use with Vance & Hines exhaust systems •Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information) •Includes all necessary mounting hardware
THROTTLEPAK™ THROTTLE MANAGEMENT SYSTEM
•Brings back the quick throttle response of cable actuated throttles lost in throttle by wire (TBW) •One twist of the throttle and riders will notice the improved response and acceleration •Works on any bike’s configuration; stock, modified and any exhaust combination •Possibly the easiest performance mod ever; installs in minutes, simply plug into factory connectors •Made in the U.S.A.
PART #
DESCRIPTION
1020-1525
All 08-11 H-D Throttle By Wire (TBW) models
SUG. RETAIL $219.99
NOTE: Not legal for sale or use on pollution controlled vehicles. NOTE: Requires the use of a high-performance air filter.
PART #
DESCRIPTION
1020-1521
For 11 FLHT, FLHR, FLHX, FLTR models
SUG. RETAIL $279.95
EFI POWER PROGRAMMER
•Get riding quickly with this fuel-management unit and select the mode that suits your style •Plugs into existing wiring using the stock connectors •Unlike most other fuel-injection programmers, this one is load-sensitive •No laptop or software required NOTE: Professional installation is recommended.
PART #
DESCRIPTION
1020-1491
For 08-11 XR1200/1200X
4
SUG. RETAIL $359.95
OXYGEN SENSOR ELIMINATOR KITS 1020-1395 AND ACTIVE INTAKE AND EXHAUST ELIMINATOR KIT
1020-1478
•Oxygen Sensor Eliminator Kits allow air/fuel ratio 1020-1479 changes for racing applications •Active Intake and Exhaust Eliminator Kit is used to avoid setting a diagnostic trouble code when installing some aftermarket air filters and exhaust that require the removal of original equipment active systems; for off-road racing use only NOTE: Not legal for sale or use on pollution-controlled vehicles.
PART # DESCRIPTION OXYGEN SENSOR ELIMINATOR KITS
1020-1395 For 06-11 models (except 10-11 FLHR/FLHT/FLHX/ FLTR and H-D FL Trikes 1020-1478 For 10-11 FLHR/FLHT/FLHX/FLTR and H-D FL Trikes
ACTIVE INTAKE AND EXHAUST ELIMINATOR KIT
1020-1479 For late-model European spec models w/ active intake and exhaust
SUG. RETAIL $24.95 34.95
29.95
COBRA FULLLENGTH SEAT
0801-0585
•A blast from the past with true “chopper” style •Follows the flow of your bike. It has a little thicker passenger area •Top-grade black vinyl cover •Base plate is powder-coated steel and carpeted to protect the fender •Made in the U.S.A.
PART # DESCRIPTION FOR 08-11 FLHT, FLHR, FLHX AND FLTR MODELS 0801-0587
Smooth seat
SUG. RETAIL $314.95
VILLAIN SOLO SEAT
•A look unlike any other – will transform the look of your bike •Molded one-piece foam foundation, covered with premium-grade black vinyl on a 16-gauge (1.5mm) powder-coated steel base plate •Seat bottom carpeted to protect the fender •No pillion seat available •Made in the U.S.A.
PART # DESCRIPTION FOR 06-10 FXST, 07-11 FLSTF (EXCEPT FXSTD, FXSTSSE) 0802-0600
Smooth seat
0801-0584
AVIATOR SOLO SEAT
•Design fills the gap between the Monterey solo touring seat and the Bare Bones thin, low seat •Top-grade black vinyl cover •Base plate is powder-coated steel and carpeted to protect painted surfaces •Seating area is 13” W with 5” of back support •Pillion pad sold separately •Made in the U.S.A.
0801-0586
PART # DESCRIPTION FOR 08-11 FLHT, FLHR, FLHX, FLTR MODELS SUG. RETAIL $270.95
0801-0584 0801-0585 0801-0586
Smooth solo seat Smooth pillion pad; 103/4” W Smooth wide pillion pad; 13” W
SUG. RETAIL $283.95 149.95 156.95
SOLAR
FOLD-DOWN LUGGAGE RACK
REFLECTIVE
EZ GLIDE III™ BACKREST ASSEMBLY
•Folds down from the sissy bar to create extra storage space when you need it •Hinges up against the back rest when not in use for a clean look •For use with OEM stock or “low” sissy bar side plates on H-D rigid or detachable side plates on models listed •Measures 111/2” L x 81/2” – 51/2” W (tapered) NOTE: Not for use with Küryakyn Sissy Bar side plates or Küryakyn Raptor Sissy Bar.
PART #
DESCRIPTION
1501-0389 For 84-11 FXST (except FXSTD), 06-11 FLST (except 07-11 FLSTFSE, 07-11 FLSTF, 08-11 FLSTSB); 06-11 FXD (except 08-11 FXDF, 09 FXDFSE), 04-11 XL
SUG. RETAIL
$159.95
SADDLEBAG/SIDE COVER ACCENTS FOR TOURING MODELS WITH HARD BAGS
DESCRIPTION
3501-0656
For 93-08 FLT, FLHT, FLHR, FLTR, FLHX
PART #
DESCRIPTION
0822-0154
EZ Glide III™ backrest assembly
SUG. RETAIL $199.95
DELUXE NECK COVER KIT
•Add brilliance to a dull area with these smooth, quickly installed chrome covers that shroud the neck and extend down the frame •Includes two snap-on down tube pieces that add coverage almost all the way down to the floorboard mounts
•Create a flowing, sweeping look with these streamlined chrome accents •Work with the contours of the saddlebags •Designed to be used without saddlebag rails •Peel-and-stick installation •Sold as a set of six pieces
PART #
•Pad features solar-reflective leather in the contact area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler backrest, higher durability and longer life over conventional leather or vinyl •Sewn in zipper pouch on rear of pad •Developed to be used in all Drag Specialties seats with EZ Glide II™ applications where a taller pad is desired •Will also work in the passenger position on all Drag Specialties seats with dual-backrest seat applications •Backrest has a single lower detent for positioning in the seat; does not adjust up or down on the bar •Adusts fore-and-aft 2”; pivots and will fold forward •All exposed metal parts feature a polished, nickel-chrome finish •All internal hardware is zinc-plated to prevent rust •14-gauge steel internal base plate •Pad measures 10” W x 71/2” tall •Made in the U.S.A.
SUG. RETAIL $124.95
PART #
DESCRIPTION
0504-0194
For 95-07 FLHT, FLHR, FLTR, FLHX
SUG. RETAIL $199.95
5
PERFORMANCE MACHINE
With more Trikes from “The Motor Company” rolling down the road every day, it is great to have the folks at Performance Machine dreaming, designing and building some of the hottest new products going for this lucrative market. Their latest custom wheels and brakes are probably the first things you think of, but remember that many of their other popular offerings for 2-wheel Tourers look great and perform equally as well on the 3-wheelers.
DIFFERENTIAL-BORE FOUR-PISTON REAR CALIPER
•Caliper has differential bore pistons with dual-pad design •Differential bore pistons apply different forces at both the leading and the trailing edges of the pad to ensure long life •137 x 4B caliper design PART # DESCRIPTION •Includes brake pads 1701-0379 For 08-11 FXSTB, FXSTC, FLSTF disc applications •Made in the U.S.A.
4-PISTON REAR CALIPER/ BRAKE KITS FOR H-D FL TRIKE
•Combines Performance Machine’s proven 4-piston calipers with integrated race technology of their master cylinders •Stage 1 kit includes calipers, master cylinder and brake line •Stage 2 kit includes calipers, master cylinder, 11.5” brake rotors and brake line •Made in the U.S.A.
SUG. RETAIL $549.95
1701-0378
1701-0377
NOTE: Stage II kits require use of 18” rear wheels.
PART # DESCRIPTION FOR 10-11 FLHTCUTG AND FLHXXX MODELS 1701-0377
SUG. RETAIL
Stage 1
$1,399.95
PART # DESCRIPTION FOR 10-11 FLHTCUTG AND FLHXXX MODELS (CONT) 1701-0378
SUG. RETAIL
Stage 2
$1,999.95
Trike rear wheel
Front wheel
WRATH CONTRAST CUT™ ONE-PIECE ALUMINUM WHEELS
•These forged wheels place the highest material strength in the same direction as the operating load, creating a light and strong wheel •Contrast Cut™ finish starts with a polished wheel that has been black anodized, then re-cut to open up the design •Feature the contour rim lip for a graceful arc from rim to lip •Made in the U.S.A. NOTE: 09-11 FLHT, FLHR, FLHX, FLTR front applications require the use of the OEM spacers.
DESCRIPTION FRONT WHEELS
18” x 3.5” for 08-11 FLTR, 18” x 3.5” for 08-11 FLTR, H-D FL trike w/o ABS 18” x 3.5” for 00-07 FLTR, 21” x 3.5” for 08-11 FLTR, 21” x 3.5” for 08-11 FLTR, H-D FL trike w/o ABS 21” x 3.5” for 00-07 FLTR,
PART # FLHT, FLHR, FLHX w/ ABS FLHT, FLHR, FLHX, FLHT, FLHR FLHT, FLHR, FLHX w/ ABS FLHT, FLHR, FLHX, FLHT, FLHR
SUG. RETAIL
0201-1359
$1,349.95
0201-1357 0201-1361 0201-1358
1,299.95 1,299.95 1,449.95
0201-1356 0201-1360
1,399.95 1,399.95
DESCRIPTION REAR WHEELS
LEFT/RIGHT PART #
15.5” x 5” for 09-11 H-D FL Trike models 18” x 5.5” for 09-11 H-D FL Trike models 15” x 7” for Lehman Renegade conversion kits
Left Right Left Right Left Right
0202-1577 0202-1577 0202-1578 0202-1578 0202-1579 0202-1579
SUG. RETAIL $899.95 899.95 899.95 899.95 899.95 899.95
WRATH CONTRAST-CUT™ TWO-PIECE BRAKE ROTORS
•420 stainless steel outer band •Machined Contrast Cut™ aluminum carrier •Contrast Cut™ finish starts with a polished carrier that has been black anodized and then re-cut to open up the design •Specifically designed for use with Performance Machine wheels •Made in the U.S.A. NOTE: 13” rotor will require the use of PM calipers designed for 13” rotors.
DESCRIPTION PART # SUG. RETAIL FOR 00-11 MODELS (EXCEPT 08-11 DRESSERS. H-D FL TRIKE, V-ROD, SPRINGERS, 06-11 DYNA GLIDE FRONT) 11.5” rotor, front left 11.5” rotor, front right
6
1710-1225 1710-1225
$329.95 329.95
DESCRIPTION PART # SUG. RETAIL FOR 00-11 MODELS (EXCEPT 08-11 DRESSERS, H-D FL TRIKE, V-ROD, SPRINGERS, 06-11 DYNA GLIDE) 13” rotor, front left 13” rotor, front right
1710-1226 1710-1226
$449.95 449.95
DESCRIPTION PART # SUG. RETAIL FOR 08-11 FLTR/FLHT/FLHR/FLHX, H-D FL TRIKE (FRONT ONLY), 06-11 DYNA (FRONT ONLY) 11.8” rotor, front left 11.8” rotor, front right
1710-1227 1710-1227
$329.95 329.95
POLISHED STAINLESS STEEL FLANGE WASHER SYSTEM
•This system cleans up the stamped flat edge and stepped look of standard flat washers when used with Race Proof™ 12 Point flange bolt •Every washer is specifically engineered for each size bolt with several key design features •A precision counterbored hole is CNC-machined for the bolt to sit down inside of the washer – when the bolt is installed in the washer the two flanges meet for an almost seamless look •All washers also feature a tight tolerance hole with an i.d chamfer to clear the large under head radius on Race Proof™ bolts •To achieve a highly reflective finish a large radius is machined on the edge of each washer – a radius will “shine” and reflect more light than a square edge •Finally each washer is polished, by hand, to a perfect mirror finish •Washers are available for the entire range of bolt sizes from 1/4” through 7/16” in a variety of diameters; conveniently packaged two or four to a pack with 7/16” x 1.062” washers also packaged in a 5-pack for belt sprocket applications •Made in the U.S.A.
PART #
DESCRIPTION
2404-0490 2404-0491 2404-0492 2404-0493 2404-0494
1/4”
x .750” (4-pk) 1/4” x 1.00” (2-pk) 5/16” x .812” (4-pk) 5/16” x 1.00” (2-pk) 3/8” x .812” (4-pk)
SUG. RETAIL $13.95 8.95 14.95 8.95 14.95
PART #
DESCRIPTION
2404-0495 2404-0496 2404-0497 2404-0498 2404-0499
3/8”
SUG. RETAIL
x .875” (4-pk) 7/16” x 1.062” (2-pk) 7/16” x 1.062” (5-pk) 1/4” x .750” (2-pk) 5/16” x 8.12” (2-pk)
$14.95 8.95 22.95 6.95 7.95
1013-0075 1013-0074
CHROME BRACKET KITS FOR TUNED INDUCTION AIR CLEANERS
•Kits feature a support bracket and breather system all in one •Tuned induction air cleaners 1010-0563, 1010-0564 and 1010-0565 sold separately (see 2011 FatBook, page 398) •Made in the U.S.A.
PART #
DESCRIPTION
1013-0075
For 86-03 XL w/ Super E/G series carb
SUG. RETAIL $257.95
PART #
DESCRIPTION
1013-0074
For 91-11 XL w/ stock CV carb & EFI
SUG. RETAIL $257.95
SOLENOID END COVER/STARTER BUTTONS
•Beautiful T-6 billet aluminum replaces the OEM end cover •Can be used as primary or auxiliary starter button •Available in triple-plated show chrome or wrinkle black powdercoat finish •Install in just minutes with OEM hardware •For use with all 90-11 OEM starters and Terry Components 1.2kw or 1.4kw starters, and 1.6kw or 1.8kw Super Slugger high-torque starters •Made in the U.S.A.
PART #
DESCRIPTION
2110-0382
Chrome
SUG. RETAIL $79.95
•Made of brown acrylic •Features a stainless steel “bull nose” tip
DESCRIPTION
2105-0105
For 34-53 Indian Chief, Scout, 741
2110-0383
PART #
DESCRIPTION
2110-0383
Wrinkle black
SUG. RETAIL $79.95
BRAKE AND CLUTCH PEDAL PAD SET
DISTRIBUTOR ROTOR PART #
2110-0382
SUG. RETAIL $13.95
•Set includes heel and toe pad for clutch pedal and pad for rear brake pedal •All pads made of black rubber
PART #
DESCRIPTION
1611-0031
For 34-53 Indian Chief and Scout
SUG. RETAIL $16.95
BREAKER POINTS
•Includes following and stationary contacts, stationary contact lock nut, and cam lubricant; DOES NOT include stationary contact mounting bracket •Mounting hardware and instructions also included
CONDENSER
•Zinc plate •Features a long body and scalloped mounting bracket just like the original
PART #
DESCRIPTION
2105-0104
For 34-53 Indian Chief, Scout, 741
SUG. RETAIL $6.95
PART #
DESCRIPTION
2105-0102
For 34-53 Indian Chief, Scout, 741
SUG. RETAIL $5.95
7
1510-0157
SADDLEBAG SUPPORT BRACKETS •High-quality OEM-style replacements •Chrome-plated finish •Sold as a set of one left- and one right-side bracket
PART #
DESCRIPTION
3501-0612
For 09-11 FLHX, FLTRU and FLTRX; repl. OEM #49206-09A and 49207-09A
SUG. RETAIL
$119.95
FENDER LUGGAGE RACKS
1510-0158
•Chrome-plated rack made of 3/8” steel tubing; carries up to 10 lb. •Mounts to stock seat mounting screw and license plate bracket •Mounting hardware and instructions included
PART #
DESCRIPTION
1510-0157 1510-0158
For 06-11 FLSTC For 06-11 FXD w/ conventional license plate mount
SUG. RETAIL $49.95 59.95
0214-0573 0214-0572
0214-0570 0214-0577
0214-0575
0214-0576
0214-0571
0214-0574
CHROME AXLE KITS
•Bright chrome finish on axle and hardware beautifies your bike •Machined from chrome-moly steel •Kits include axle, spacers, nuts and washers
0214-0582
0214-0579 0214-0583
NOTE: Rear axle length given is measured from the inside of the bolt head to the end of the threads.
PART # FRONT
0214-0570 0214-0577 0214-0573 0214-0572 0214-0571 0214-0577 0214-0576
DESCRIPTION For For For For For For For
86-99 84-87 67-71 49-65 36-47 84-85 77-83
SUG. RETAIL
FLST, FLSTF, FLSTN FXR, 86-87 XL, 85-86 FXE/FXSB FL FL, 66 FL Knucklehead, 48 FL XL XL, FX
$58.95 49.95 49.95 49.95 52.95 49.95 49.95
PART # FRONT (CONT)
DESCRIPTION
0214-0575 0214-0574
For 73-77 XL, FX For 52-72 XL, 71-72 FX
0214-0582
For 80-86 Big Twin 4-speed w/ belt drive (12.4375”) For 58-66 FL (11.250”) For 52-78 XL (10.9375”)
REAR
0214-0579 0214-0583
SUG. RETAIL $49.95 49.95
49.95 52.95 49.95
TIRE MONITORING SYSTEM
•Monitors tire air pressure and temperature •Measures air pressure from 10-70 PSI ( ± 2 PSI); also measures in BAR and KPA •Reads internal air temperature from -220F - 1850F ( ± 50F); also reads in Celsius •System includes a handheld remote transceiver with LED display, two sensors that attach to the existing valve stems, tool set, stem nuts, batteries and instructions
8
PART #
DESCRIPTION
0363-0044
Tire monitoring system
SUG. RETAIL $199.95
2040-0584
2040-0585 2040-0581 2040-0583
FENDER TIP LIGHTS
•These tip lights are a perfect fit on OEM and aftermarket front and rear fenders •Clear fender light comes with amber and red bulb •Replacement lenses available separately; see the 2011 FatBook •Sold each
FRONT LIGHTS PART # DESCRIPTION FOR 00-11 FLT, FLHT 2040-0581
SUG. RETAIL
Light w/ amber lens; repl. OEM #68706-00 (DOT approved) Light w/ smoke lens
2040-0585
$21.95 21.95
REAR LIGHTS PART # DESCRIPTION FOR 09-11 FLT, FLHT
SUG. RETAIL
2040-0583 Light w/ red lens 2040-0587 Light w/ smoke lens
FOR 99-08 FLT, FLHT
$51.95 52.95
2040-0580 Light w/ red lens; repl. OEM #59672-99 (DOT approved)
REPL. REAR LENS ONLY PART # DESCRIPTION FOR 99-08 FLT, FLHT 2040-0588
Repl. red lens (DOT approved)
21.95
SUG. RETAIL $6.95
2040-0580
2040-0582
REPL. FRONT LENS ONLY PART # DESCRIPTION FOR 00-11 FLT, FLHT 2040-0589 2040-0592
SUG. RETAIL
Repl. amber lens (DOT approved) Repl. smoke lens
$6.95 7.95
PART # DESCRIPTION FOR 99-08 FLT, FLHT (CONT)
SUG. RETAIL
2040-0584 Light w/ smoke lens
$21.95
FOR 04-11 FLST
2040-0582 Light w/ red lens; repl. OEM #59683-03 (DOT approved) 2040-0586 Light w/ smoke lens
PART # DESCRIPTION FOR 99-08 FLT, FLHT (CONT) 2040-0591
21.95 21.95
SUG. RETAIL
Repl. smoke lens
$7.95
CHROME TRANSMISSION SIDE COVER
•Made from chrome-plated, die-cast zinc •Mounts with existing hardware
PART #
DESCRIPTION
1105-0035
For 07-11 FLT/FLHT/FLHR/FLTR/H-D FL Trike; 06-11 FXD, FXDWG; 07-11 FXST/FLST; repl. OEM #37116-06
SUG. RETAIL $54.95
1105-0033
1105-0034
CHROME TRANSMISSION TOP COVERS •High-quality OEM replacement covers •Beautifully complements your other chrome engine and transmission pieces •Mount using existing hardware
PART #
DESCRIPTION
1105-0033 For 07-08 FLHT, FLHX, FLHR, FLTR; 07-08 FXST/FLST; 06-08 FXD, FXDWG; repl. OEM #34469-06A 1105-0034 For 01-06 FLHT, FLHTC, FLHR, FLTR; 00-06 FXST/ FLST; repl. OEM #34541-00
SUG. RETAIL $49.95 49.95
CLUTCH SPRING CONVERSION KIT
•Converts your diaphragm spring clutch system to six coil springs •CNC-machined billet pressure plate •Ideal for stock to highperformance motors •Allows for more precise adjustment and smoother operation •Increases the holding capacity of the clutch •Includes two sets of coil springs to provide three different pressure options •Utilizes the stock clutch hub, shell and clutch plates •Made in the U.S.A.
PART #
DESCRIPTION
1131-2051
For 98-11 Big Twin w/ hydraulic clutch
REPLACEMENT HIGH-FLOW AIR FILTER
•Washable and reusable; accordion design provides high airflow with excellent filtration •Ideal for extended use in dirty and dusty riding conditions •Original K&N High-Flow Technology •American-made for over 35 years
SUG. RETAIL $209.95
PART #
DESCRIPTION
1011-2359
For 08-11 XR1200/1200X; repl. OEM #29377-08
SUG. RETAIL $69.95
9
HOPPE INDUSTRIES
The originator of detachable fairing and audio combinations, Hoppe continues to lead the way with fairing and audio systems that look great, sound exceptional and provide excellent coverage when rolling down the road. While others have tried to jump on this bandwagon with imitations and knock-offs, John Hoppe and wife Debbie make sure they continue to lead the way with fresh new designs and innovative ideas that riders are asking for.
ULTIMATE QUADZILLA FAIRING WITH STEREO RECEIVER
•An upgrade in style, sound and wind protection •Constructed of top-quality, hand-laid fiberglass with a gloss black gel-coat that’s ready to paint •Upgraded Eclipse AM/FM/CD/ USB radio (50Wx4) •Features include a Sirius Satellite translator and tuner, three-band EQ, USB connection, 3.5mm mini-jack auxiliary input and patch cord, 12V power socket, iPod® cable and plug and Bluetooth with mic •Stereo comes completely assembled with marine-grade weather door with chrome door bezel and four 5” pre-wired black/chrome speakers •Concealed internal antenna for a clean look •Easy quick-detach connection to bike’s electrical system •Radio hand controls •Solid inner and outer windshield trim •Three pouch storage bag •Pre-wired for CB radio and accessories; additional audio adapter cable/s required, see COVERS, SECURITY & GENERAL section in 2011 FatBook •Kits includes quick-release brackets to mount on OEM windshield docking points or accessory detachable windshield docking points •Includes tinted air wings and 5” tinted windshield; will accept 96-11 FLHT OEM style and aftermarket replacement windshields (sold separately) (some drilling and trimming may be required) •Made in the U.S.A.
PART #
DESCRIPTION
2330-0037
For 94-11 FLHR models (except FLHRS) w/ OEM quick-detach windshields
10
SUG. RETAIL $3,995.95
QUADZILLA FAIRING WITH STEREO RECEIVER
•Classically styled fairing that delivers the ultimate in sound and wind protection •Top-quality hand-laid fiberglass construction, gloss black gel-coated and ready to paint •Includes Eclipse AM/FM/CD/USB radio (40W x4); features auxiliary input, three-band EQ and USB connection •Stereo comes completely assembled with marine-grade weather door and four 5” pre-wired speakers •Concealed internal antenna for a clean, uncluttered look •Easy quick-detach connection to bike’s electrical system •Kit includes quick-release brackets to mount on OEM windshield docking points or accessory detachable windshield docking points •Includes a 12” clear windshield, will accept 96-11 FLHT OEM style and aftermarket replacement windshields (sold separately) (some drilling and trimming may be required) •Made in the U.S.A.
PART #
DESCRIPTION
2330-0006
For 94-11 FLHR models (except FLHRS) with OEM quick-detach windshield
SUG. RETAIL $1,695.95
XLS AUDIO BATWING FAIRING
•Superb wind protection and great-sounding audio with a classic style •Constructed of hand-laid fiberglass making it stronger than ABS plastic and only 20 lb. •Finished in gloss black gel-coat and ready to paint •Includes two 6” marine grade speakers and amplifier •3.5mm mini-jack MP3/auxiliary input port with detachable 3’ patchcord •Includes 5” clear windshield •Quick-detach power cord allows simple on and off in less than five minutes •Fairing mounts to OEM windshield mounting points •Made in the U.S.A. NOTE: H-D quick-detach windshield bracket mounts and front directional relocation kit not included with fairing.
PART #
DESCRIPTION
2330-0036
For 00-11 XL w/ OEM quick-detach windshield mounts
SUG. RETAIL $1,099.95
11
FEULING
With their wide-ranging expertise, the folks at Feuling are able to offer complete camchest kits that provide maximum reliability, peak performance and the coolest engine and oil temperatures going in one single part number. No guess work and no trial-anderror. Just proven combinations of camplate, oil pump, cams, pushrods, lifters and everything else needed for any engine builder to get the most bang for the buck.
HP+® COMPLETE CHAIN DRIVE CAMCHEST KITS
•All necessary components from top to bottom of the camchest •Each part works and functions together in total harmony •Provides maximum reliability, peak performance and the coolest engine and oil temperatures obtainable •Includes HP+ oil pump, high flow camplate, Reaper camshafts, fast-install pushrods, pushrod tube holder, Timken® bearings, gaskets, O-rings and ARP® hardware •Choose from a 525 cam kit or a 574 cam kit; see below for cam descriptions
525 CAMS
•Designed to increase torque band width and increase fuel economy •Great bolt-in camshaft upgrade for stock engines •Produces strong low- and mid-range power with linear horsepower and torque curve •Can be used with factory valve springs, pushrods and lifters •Increases throttle response and eases starting •1750-5800 rpm power range
0925-0534
574 CAMS
•Wicked power band for modified engines and an excellent bolt in for stock 96” engines; a great all-around camshaft with solid low end performance and mind blowing mid- and top-end power •Works best with modified cylinder heads, increased compression ratio, performance PART # DESCRIPTION SUG. RETAIL exhaust and intake systems FOR 99-06 TWIN CAM (EXCEPT 06 DYNA GLIDE) •Performance valve springs required on 99-04 engines and performance 0925-0533 525 cam kit $1,595.95 pushrods and lifters recommended 0925-0534 574 cam kit 1,595.95 •2000-6800 rpm power range
1111-0012 1111-0011
TOURING FRAME STABILIZERS
•CNC-machined aluminum, stainless steel HIEM joints and stainless mounting hardware •Prevent frame flex, frame wobble and motor oscillation •Improve handling and overall safety •Top-side design provides for a quicker, easier installation •Work with stock exhaust and most aftermarket exhaust systems •Made in the U.S.A.
PART # DESCRIPTION FOR 09-11 FLHT, FLHX, FLHR, FLTR AND H-D FL TRIKES 1111-0011 1111-0012
12
LICENSE PLATE BAR ELIMINATOR SUG. RETAIL
Polished Black anodized
$159.95 149.95
April 2011
| 9901-1016
•Preserve the stock saddlebag support brackets when removing the license plate support tube •Sold in pairs •Made in the U.S.A.
PART #
DESCRIPTION
2030-0559
For 97-08 FLT/FLHT
SUG. RETAIL $29.95